Aluminosilicates-based nanosorbents for heavy metal removal - A review.

Contamination of water bodies with heavy metals poses a significant threat to human health and the environment, requiring the development of effective treatment techniques. In this context, aluminosilicates emerge as promising sorbents due to their cost-effectiveness and natural abundance. This review provides a clear, in-depth, and comprehensive description of the structure, properties, and characteristics of aluminosilicates, supporting their application as adsorbents and highlighting their diversity and adaptability to different matrices and analytes. Furthermore, the functionalization of these materials is thoroughly addressed, detailing the techniques currently used, exposing the advantages and disadvantages of each approach, and establishing comparisons and evaluations of the performances of various functionalized aluminosilicates in the extraction of heavy metals in aqueous matrices. This work aims not only to comprehensively review numerous studies from recent years but also to identify trends in the study of such materials and inspire future research and applications in the field of contaminant removal using aluminosilicates.

Heavy metal accumulation in root and shoot tapioca plant biomass grown in agriculture land situated around the magnesite mine tailings.

Heavy metal pollution in soil has emerged as a major environmental concern. This can be attributed to human activities such as mining, modern agriculture, and industrialization. This study was conducted to determine how heavy metals spread from mine tailings to surrounding farmland. Metal absorption and accumulation were also investigated in the root and shoot biomass of tapioca crops grown in those farmlands. Metal concentrations in MTAS1 were 85.3±1.2, 45.8±1.5, 134.8±1.7, 92.4±2.2, and 78.95±1.4 mg kg-1, respectively. Heavy metal concentrations in MTAS2 and MTAS3 were found to be 79.62±1.6, 75.4±1.5, 41.31±1.1, 47.8±1.6, 142.5±2.1, 128.4±1.4, 86.2±1.9, 79.5±1.3, and 83.4±1.2 mg kg-1, respectively. Tapioca crop shoot and root biomass grown at these metal polluted sites absorbed and accumulated significant amounts of Cd, Cu, Zn, Pb, Ni, and Mn. Notably, the metal content of the tapioca crop's root and shoot biomass exceeded national standards.

Elements characteristics and potential environmental risk assessment of jarosite residue and arsenic sulfide residue based on geochemical and mineralogical analysis.

The waste slag known as jarosite residue (JR) and arsenic sulfide residue (ASR) were produced following the creation of zinc by hydrometallurgical procedures. The increasing annual zinc mining has led to growing pressure to dispose of the resulting JR and ASR from zinc smelting, making it crucial to assess their environmental impact and feasibility for utilization. The main components, distribution characteristics of elements, and potential environmental risks of zinc smelting wastes are studied through toxicity leaching tests, sequential extraction procedures, and various characterization technologies such as XRF, XRD, and SEM-EDS. The mineral compositions of JR are natrojarosite, franklinite, and gunningite, and zinc mainly adheres to the crevices of the natrojarosite mineral. Meanwhile, the ASR of flocculent structures is composed of orpiment, greenockite, arsenic oxide, and calvertite, and As appears in the form of the S-As-O phase. The Zn, Cu, and Cd in JR were dominated by exchangeable bound (81.53-96.6 %), and the main form of As, Cd, Se, and Tl in ASR was organic matter bound (87.0-99.21 %). The Risk Assessment Code (RAC) method confirmed the risk of Cd, Cu, Zn, and Mo in JR is high, while the risk of Cd, Pb, and Cr in ASR is moderate. Compared to the standard value of "Identification Standard for Toxicity of Hazardous Waste Leaching (GB5085.3-2007)", the leachate concentrations of Zn in JR as well as Cd and As in ASR were exceeded, suggesting that the JR and ASR were in the type of hazardous waste and posed an environmental risk. The study provides theoretical guidance for the future rational management and effective utilization of hazardous waste.

Heavy metal profile with health risk peculiarities in Enugu State and their long-term challenges in drinking water.

Health authorities are particularly concerned about water security in Enugu, southeast Nigeria and heavy metal (HM) pollution. The HM profiles of 51 samples collected from 17 different commercial bottled water brands in Enugu were examined using an flame atomic absorption spectroscopy. Cd, Cr, Cu, Pb, Ni, and Zn had mean values of 0.15 ± 0.03, 0.03 ± 0.02, 0.16 ± 0.03, 0.13 ± 0.02, and 0.02 ± 0.01 mg/L, respectively. The highest levels of Pb2+ were 0.27 mg/L in Exalté, Ni2+ 0.26 mg/L in Jasmine, Cd2+ 0.36 mg/L in Ezbon, Cr3+ 0.07 mg/L in Trinity, Cu2+ 0.04 mg/L in Bigi, and Zn2+ 0.02 mg/L in Aquarapha. The amounts of Cr, Cu, and Zn were below the allowable limits; nevertheless, the Pb content in eight bottled water samples exceeded both the Nigerian and World Health Organization (WHO)/U.S. Environmental Protection Agency (USEPA) permissible limits. The Cd2+ and Ni2+ levels in the 11th and 4th bottled water samples were above the WHO/USEPA-approved limits. Statistical evaluation revealed significant differences in the amounts of HM ions in the samples (p < 0.05). The findings indicated that concentration levels of Cd2+ Ni2+, and Pb2+ pose a public health concern that needs to be addressed due to potential risk to consumer health.

Remediation effect of walnut shell biochar on Cu and Pb co-contaminated soils in different utilization types.

Biochar, with its dual roles of soil remediation and carbon sequestration, is gradually demonstrating great potential for sustainability in agricultural and ecological aspects. In this study, a porous biochar derived from walnut shell wastes was prepared via a facile pyrolysis coupling with in-situ alkali etching method. An incubation study was conducted to investigate its performance in stabilizing copper (Cu) and lead (Pb) co-contaminated soils under different utilization types. The biochar effectively decreased the bioavailable Cu (8.5-91.68%) and Pb (5.03-88.54%), while increasing the pH, CEC, and SOM contents in both soils. Additionally, the results of sequential extraction confirmed that biochar promoted the transformation of the labile fraction of Cu and Pb to stable fractions. The mechanisms of Cu and Pb stabilization were found to be greatly dependent on the soil types. For tea plantation yellow soil, the main approach for stabilization was the complexation of heavy metals with abundant organic functional groups and deprotonation structure. Surface electrostatic adsorption and cation exchange contributed to the immobilization of Cu and Pb in vegetable-cultivated purple soil. This research provides valuable information for the stabilization of Cu and Pb co-contaminated soils for different utilization types using environmentally-friendly biochar.

Recent advances of application of bentonite-based composites in the environmental remediation.

Bentonite-based composites have been widely utilized in the removal of various pollutants due to low cost, environmentally friendly, ease-to-operate, whereas the recent advances concerning the application of bentonite-based composites in environmental remediation were not available. Herein, the modification (i.e., acid/alkaline washing, thermal treatment and hybrids) of bentonite was firstly reviewed; Then the recent advances of adsorption of environmental concomitants (e.g., organic (dyes, microplastics, phenolic and other organics) and inorganic pollutants (heavy metals, radionuclides and other inorganic pollutants)) on various bentonite-based composites were summarized in details. Meanwhile, the effect of environmental factors and interaction mechanism between bentonite-based composites and contaminants were also investigated. Finally, the conclusions and prospective of bentonite-based composites in the environmental remediation were proposed. It is demonstrated that various bentonite-based composites exhibited the high adsorption/degradation capacity towards environmental pollutants under the specific conditions. The interaction mechanism involved the mineralization, physical/chemical adsorption, co-precipitation and complexation. This review highlights the effect of different functionalization of bentonite-based composites on their adsorption capacity and interaction mechanism, which is expected to be helpful to environmental scientists for applying bentonite-based composites into practical environmental remediation.

Understanding competitive Cu2+ and Zn2+ adsorption onto functionalized cellulose fiber via experimental and theoretical approach.

Amidoxime groups were successfully introduced to develop a novel amidoxime-functionalized cellulose fiber (AO-Cell) for absorptive removal of heavy metal ions in wastewater. The chemical structure, and the competitive adsorption of Cu2+ and Zn2+ by AO-Cell were investigated by experiments study, Density functional theory (DFT) and molecular dynamic (MD) simulation. The results showed the N and O atoms in the amidoxime group can spontaneously interact with Cu2+ and Zn2+ through sharing long pair electrons to generate stable coordination structure, which was the dominant adsorption mechanism. Besides, the enlarged surface area, improved hydrophilicity and dispersion offered by AO-Cell facilitate the adsorption process by increasing the accessibility of absorption sites. As results of these synergetic modification, AO-Cell can remain effective in a wide pH range (1-6) and reach adsorption equilibrium within 60 min. At optimal conditions, the achieved theoretical adsorption capacity is as high as 84.81 mg/g for Cu2+ and 61.46 mg/g for Zn2+ in the solution with multiple ions. The competition between Cu2+ and Zn2+ in occupying the absorption sites arises from the difference in the metallic ion affinity and covalent index with the adsorbent as demonstrated by the MD analysis. Importantly, AO-Cell demonstrated favorable recyclability after up to 10 adsorption-desorption cycles.

Design, preparation, and performance of different adsorbents based on carboxymethyl chitosan/sodium alginate hydrogel beads for selective adsorption of Cadmium (II) and Chromium (III) metal ions.

Developing cost-effective and efficient adsorbents for heavy metals in multicomponent systems is a challenge that needs to be resolved to meet the challenges of wastewater treatment technology. Two adsorbents were synthesized, characterized, and investigated for the removal of Cd2+ and Cr3+ as model heavy metals in their single and binary solutions. The first adsorbent (ACZ) was a nanocomposite formed of O-Carboxymethyl chitosan, sodium alginate, and zeolite. While, the other (ACL) contained ZnFe layered double hydroxides instead of the zeolite phase. Adsorbents were characterized using XRD, FTIR, SEM, and swelling degree analysis. For single heavy metal adsorption isotherms, data for both adsorbents was best fitted and indicated a multilayer adsorption nature. For binary adsorption, Langmuir model with interacting parameters showed the best results compared to other models for both pollutants. For single system, Avrami model was found to be the best model representing the adsorption kinetics data, which indicates that the mechanism of adsorption follows multiple kinetic orders that may change during duration of adsorption process. Numerous interaction mechanisms can occur between the heavy metals and functional groups in the synthesized hydrogels such as NH2, COOH, and OH groups leading to efficient adsorption of metal ions.

Metal(loid) contamination in Bangladesh: a comprehensive synthesis in different landscapes with ecological and health implications.

Elevated metal(loid) concentrations in soil and foodstuffs is a significant global issue for many densely populated countries like Bangladesh, necessitating reliable estimation for sustainable management. Therefore, a comprehensive data synthesis from the published literature might help to provide a wholistic view of metal(loid) contamination in different areas in Bangladesh. This study provided a clearer view of metal(loid) contamination status and their associated ecological and health risks in different land use and ecosystems in Bangladesh. Comprehensive analyses were performed on data gathered from 143 published articles using multiple statistical techniques including meta-analysis. Considering the potential loading of metal(loid), the data were summarized under various groups, including coastal, rural, urban and industrial regions. Also, the concentrations of seven metal(loid)s, e.g., cadmium (Cd), chromium (Cr), copper (Cu), nickel (Ni), lead (Pb), zinc (Zn), and arsenic (As) in soil, sediment, cereal, vegetable, fruit, surface water and groundwater were included. Results showed that the relative concentrations of metal(loid)s in comparison to the maximum permissible limit (MPL) were mostly less than one, although they varied significantly for locations and individual metal(loid). However, the normalized cumulative relative concentrations over the MPL for all seven metal(loid)s across different environmental samples were 4.75, 2.97, 1.51 and 2.79 for coastal, industrial, rural and urban areas, respectively, which was due to the higher concentration of Cd, Cr and Cu. Similar to the metal(loid) concentrations, the average of cumulative median non-cancer risks for all metal(loid)s was in the order of industrial (6.46) > urban (4.05) > rural (3.83) > coastal (2.41). This research outcome will provide a foundation for future research on metal(loid)s and will help in pertinent policy-making by the relevant authorities in Bangladesh.

Adsorption and distribution of heavy metals in aquatic environments: The role of colloids and effects of environmental factors.

The study investigated the distributions of heavy metals (Cd, Cr, Cu, Mn, and Pb) between dissolved fraction (<0.7 µm) and particles (>0.7 µm) during the adsorption process. The dissolved fraction was further separated into truly dissolved (<3 kDa) and colloidal (3 kDa-0.7 µm) fractions. Significant metal adsorption occurred on the colloids, resulting in their aggregation into particles, which in turn influenced the particle adsorption kinetics. Colloids could either accelerate or inhibit the transformation of metal ions into particulates, depending on their stability. Competitive metals for colloids (Pb and Cr) were more susceptible to the effects of colloids than other elements. DOM was the predominant environmental factor influencing colloid behavior. The XDLVO theory showed that DOM enhanced the negative charge of colloids and made the colloid surface more hydrophilic, inhibiting the aggregation of colloids. DOM resulted in substantial increases in the concentrations of colloidal Pb and Cr from 0.31 µg/L and 4.58 µg/L to 20.52 µg/L and 43.51 µg/L, respectively, whereas the increment for less competitive metals (Cd and Mn) was smaller. These findings suggest that the distribution of heavy metals is influenced not only by adsorption from particles and ions but also by the complex dynamics of colloids.

The effect of heavy precipitation on the leaching of heavy metals from tropical coastal legacy tailings.

The continued growth in demand for mineral resources has led to a large amount of mining wastes, which is a major challenge in the context of carbon neutrality and climate change. In this study, runoff migration, batch leaching, and column experiments were used to investigate the short-, medium-, and long-term leaching of heavy metals from legacy tailings, respectively; the cumulative metal release kinetic equations were established, and the long-term effects of tailings leaching were verified by HYDRUS-1D. In runoff migration experiments, surface dissolution of tailings and the co-migration of adsorbed soil particles by erosion were the main carriers in the early stages of leachate formation (Mn âˆ¼ 65 mg/L and SO42- up to 2697.2 mg/L). Batch leaching tests showed that the concentration of heavy metals in soil leached by acid rain were 0.1 âˆ¼ 22.0 µg/L for Cr, 0.7 âˆ¼ 26.0 µg/L for Cu, 4.8 âˆ¼ 5646.0 µg/L for Mn, 0.3 âˆ¼ 232.4 µg/L for Ni, and 1.3 âˆ¼ 448.0 µg/L for Zn. The results of column experiments indicated that some soluble components and metals with high mobility showed a significant decreasing trend at cumulative L/S ≤ 2. Additionally, the metals have higher leaching rates under TCLP conditions, as shown by Mn > Co > Zn > Cd > Ni > Cu > Pb > Cr. The fitting results of Langmuir equation were closer to the cumulative release of metals in the real case, and the release amounts of Mn, Zn, Co, and Ni were higher with 55, 5.84, 2.66, and 2.51 mg/kg, respectively. The water flow within tailings affects the spatial distribution of metals, which mainly exist in relatively stable chemical fractions (F3 + F4 + F5 > 90 %) after leaching. Numerical simulation verified that Mn in leachate has reached 8 mg/L at a scale of up to 100 years. The research results are expected to provide technical basis for realizing the resource utilization of tailings in the future.

The effect of extracellular polymeric substances on MICP solidifying rare earth slags and stabilizing Th and U.

Microbially induced carbonate precipitation (MICP) has been used to cure rare earth slags (RES) containing radionuclides (e.g. Th and U) and heavy metals with favorable results. However, the role of microbial extracellular polymeric substances (EPS) in MICP curing RES remains unclear. In this study, the EPS of Lysinibacillus sphaericus K-1 was extracted for the experiments of adsorption, inducing calcium carbonate (CaCO3) precipitation and curing of RES. The role of EPS in in MICP curing RES and stabilizing radionuclides and heavy metals was analyzed by evaluating the concentration and morphological distribution of radionuclides and heavy metals, and the compressive strength of the cured body. The results indicate that the adsorption efficiencies of EPS for Th (IV), U (VI), Cu2+, Pb2+, Zn2+, and Cd2+ were 44.83%, 45.83%, 53.7%, 61.3%, 42.1%, and 77.85%, respectively. The addition of EPS solution resulted in the formation of nanoscale spherical particles on the microorganism surface, which could act as an accumulating skeleton to facilitate the formation of CaCO3. After adding 20 mL of EPS solution during the curing process (Treat group), the maximum unconfined compressive strength (UCS) of the cured body reached 1.922 MPa, which was 12.13% higher than the CK group. The contents of exchangeable Th (IV) and U (VI) in the cured bodies of the Treat group decreased by 3.35% and 4.93%, respectively, compared with the CK group. Therefore, EPS enhances the effect of MICP curing RES and reduces the potential environmental problems that may be caused by radionuclides and heavy metals during the long-term sequestration of RES.

Effective acid mine drainage remediation in fixed bed column using porous red mud/fly ash-containing geopolymer spheres.

Acid mine drainage (AMD) poses a significant threat to water quality worldwide, being amongst the most problematic environmental concerns of the millennium. This work reports for the first time the remediation of real AMD, from a Portuguese abandoned mine, in fixed bed column using porous red mud/fly ash-based geopolymeric spheres. Porous waste-based spheres (2.6 ± 0.2 mm) were obtained by a suspension-solidification method through the addition of optimum foaming agent dosage. The sorbent capacity in removing cations from AMD was evaluated by targeting selected hazardous elements: Zn, Cu, Co, Pb and Ni, based on their occurrence in the effluent and potential hazard. The spheres exhibited a dual mechanism of action, simultaneously neutralizing the acidic sample while removing cations through adsorption achieving removal efficiencies between 51 % and 80 %. Other elements present in high levels, such as iron were efficiently removed (>96 %). The role of precipitation, due to the pH neutralization, and adsorption was determined. The sorbent regeneration and reusability were evaluated for up to five cycles. Moreover, the effectiveness of waste-based geopolymers treating distinct AMD waters due to seasonal variations was also evaluated, further demonstrating the effectiveness of the proposed strategy to address environmental concerns stemming from mining activities.

Seasonal variation of heavy metals in water and Cyprinus carpio L. from Umiam Lake reservoir of Meghalaya, India: Potential health risk assessment for human consumption.

The purpose of this study is to assess the seasonal variation of heavy metal concentration in water and fish tissues of common carp (Cyprinus carpio L.) from the Umiam Lake reservoir located in the Ri bhoi district of Meghalaya, India, and to elucidate the possible human health risk of ingesting fish captured from the contaminated lake. Results show significant (p < 0.05) seasonal differences of heavy metal concentrations in the water and different tissues of fish Cyprinus carpio L.. The total concentration of heavy metals in the water exceeds the WHO and BIS standards and thus poses a significant threat to the aquatic flora and fauna of the reservoir. The heavy metal concentrations in fish tissues were tissue-dependent, where the average concentration of heavy metals in all the tissues of Cyprinus carpio L. was in the order of Cr > Pb > Cu > Cd. In addition, the health risk assessment suggests that the heavy metals in the fish muscle from the Umiam Lake reservoir might have adverse effects on human. Therefore, the overall results of the study provide an understanding on the seasonal distribution of heavy metals in water, provide insight on their bioaccumulation in the fish tissues, and highlights the potential health risk for the local population of long-term fish consumption from Umiam Lake reservoir.

Minimization of heavy metal adsorption in struvite through effective separation and manipulation of flow field.

The admixture of heavy metals on struvite during the P recovery process from wastewater will affect its value for safe agricultural application, but it is not clear how to effectively separate heavy metals from struvite. Herein, a two-stage separation reactor (static and dynamic) has been developed to achieve efficient separation of heavy metals and struvite. The generation of struvite from real swine wastewater would naturally precipitate to the lowest layer under static conditions, leading to an enrichment of heavy metals (75 % Cu and 84 % Zn) in suspension. Meanwhile, phosphorus recovery from real swine wastewater results in the generation of a large amount of fines flowing out of the reactor due to the effects of suspended solids (SS), etc., making it necessary to recover phosphorus by static separation. For the dynamic separation step, we also analyzed the characteristics of struvite formation at different rotational speeds in a continuous reaction system. The results demonstrated that the shear rate of the fluid affects the particle size of struvite, which in turn determines the rate and the distribution of struvite in either primary or secondary recovery tanks. The implementation of zonal regulation in the flow field can produce a higher phosphorus efficiency (from 85.8 to 95.5 % at pH=8.1-8.2, from 93.8 to 98.5 % at pH=9.0-9.1) and a lower alkali consumption (55.56 % of alkali cost), which is favorable for the separation of struvite crystals and heavy metals (the amount of Cu and Zn metals separated increased by more than 50 %), and ultimately yield high quality of struvite. The findings in this study will provide insights for the separation and reduction of heavy metals through a combined method with dynamic and static in a continuous system, providing a reference for the safe application of struvite in agriculture.

Waste-treating-waste: Effective heavy metals removal from electroplating wastewater by ladle slag.

Ladle slag, a by-product of steelmaking, presents a valuable strategy for waste reduction and valorization in wastewater treatment. This work demonstrates the successful simultaneous removal of Al(III), B(III), Ba(II), Cr(III), Mg(II), Sr(II), Pb(II), and Zn(II), from electroplating wastewater by ladle slag. First, Cr(III) and Pb(II) removals were evaluated in single synthetic systems by analyzing the influence of pH, temperature, and ladle slag dosage. Competitive removal was observed in binary batch experiments of Cr(III) - Pb(II), achieving 88% and 96% removal, respectively, with fast kinetics following a pseudo-second-order model. The findings of XRD, SEM, EDX, and FTIR of the slag after removal helped to elucidate the synergic removal mechanism involving ladle slag dissolution, precipitation, ion exchange, and adsorption in a tight relationship with the solution pH. Lastly, ladle slag was tested in real electroplating wastewater with the aforementioned ions at concentrations ranging from <1 to 1700 mg/L. The removal was performed in two steps, the first attained the following efficiencies: 73% for Al(III), 88% for B(III), 98% for Ba(II), 80% for Cr(III), 82% for Mg(II), 99% for Pb(II), 88% for Sr(II), and 88% for Zn(II). Visual MINTEQ simulation was utilized to identify the different species of ions present during the removal process. Furthermore, the leaching tests indicated a minimal environmental risk of secondary pollution in its application. The results promote an effective and sustainable approach to wastewater treatment within the circular economy.

Characterization of heavy metal contamination in groundwater of typical mining area in Hunan Province.

Heavy metal pollution in mining areas is a major cause of groundwater contamination, characterized by high toxicity, difficult degradability, and easy accumulation, and the source of pollution is not easily identified. Relying on the results of groundwater quality analysis tests in a typical mining area, this paper uses the SPSS 18.0 statistical analysis model to analyze the statistical characteristics of different indicator factors in the antimony mining area. The conclusions play a crucial role in implementing health and safety measures for the mining area and its surrounding residents. The statistical study results show that Mn, Se, As, and Sb are closely related to human mining activities and are polluted to varying degrees; the principal component analysis model indicates that the upstream monitoring points 26#, 22#, and 25# in the mining area groundwater are less polluted. The five monitoring points with a comprehensive principal component F > 1 are all located within the range of the metal mine cluster, indicating that the groundwater in the mining area is particularly sensitive to the impact of anthropogenic mineral extraction. This research summarizes the hydrogeological and geochemical statistical characteristics of the groundwater in the mining area, providing a reference for groundwater pollution risk diagnosis, ecological restoration, and heavy metal pollution prevention and control in this and similar mining areas.

Natural colonizers effectively restore heavy metal polluted wasteland.

In India, ∼30% of total land is degraded due to pollution, salinization, and nutrient loss. Change in soil-quality at urban waste-dumping site prior and after cow-dung amendment was compared with control agriculture soil. The soil at waste-dumping site had elevated pH, EC, temperature and lowered OC and NPK concentrations when compared to control. Polymetallic pollution of Cr, Cd, Pb, and Ni beyond permissible limits was obtained. Cow-dung amendment restored soil physicochemical properties at the waste-dumping site, with increasing soil moisture, CEC and OC; however, a slight change in soil bulk-density and heavy-metal concentration post-amendment was noted. The seven natural colonizers present at the waste-dumping site accumulated more metals in roots than shoots. Datura innoxia had maximum bioaccumulation of Cr, Calotropis procera of Cd and Ni and Parthenium hysterophorus of Pb in roots. All these plants had Bioacccumulation factor (BAfroot )>1 and translocation factor (Tf) <1 for Cd and serve as its phytostabilizer except Calotropis procera which had BAfroot >1 and Tf >1 and is identified as a phytoextractor for Cd. Cow-dung amendment alone appeared to be insufficient and additionally the revegetation of natural colonizers is recommended for effective reduction in heavy metal load and improving overall soil health at wasteland. Such eco-restoration may also minimize risks to biodiversity in India.

The novelty of the work lies in revegetation of natural colonizers at polluted wasteland to reduce heavy metal load and improve overall soil health. Calotropis procera, Datura innoxia, Parthenium hysterophorus, and S. nigrum showed maximum bioaccumulation of Cr, Cd, Pb, and Ni. The work confirms C. procera as non-edible, fast growing natural colonizer as potential phytoextractor for Cd and taken into consideration to effectively restore heavy metals polluted wasteland.

Effect of Amphetamine Dependence on Redox State via Alteration of Urinary Levels of Major and Trace Elements: A Case-Control Study in the Saudi Population.

Background Drug and substance abuse remains a major medical problem worldwide. Amphetamines are potent stimulants of the central nervous system. Amphetamine abuse is highly prevalent among drug-dependents. This study was conducted in Qassim, Saudi Arabia, to evaluate amphetamine's toxic effects on major and trace elements and their correlation with redox status. Methods The study involved amphetamine-only patients admitted to the Erada Rehabilitation Centre from March to October 2023. Urine samples were analysed from both normal subjects and amphetamine-dependent groups. Results Urinary sodium and chloride levels were significantly higher in the amphetamine-dependent group than in the control group, while their calcium levels decreased. Lipid peroxidase levels significantly increased in people with a substance use disorder (SUD), indicating oxidative stress. Together, their total antioxidant capacity decreased. Zinc (Zn), copper (Cu), lead (Pb), cadmium (Cd), sodium (Na), and total antioxidant capacity levels were positively correlated with lipid peroxidase. Conclusions Amphetamine-dependent people are more likely to experience a variety of health problems. This study found a direct correlation between an imbalance in major and trace elements and the redox status.

Metal in biological samples from electronic cigarette users and those exposed to their second-hand aerosol: a narrative review.

Introduction: Electronic nicotine delivery systems (ENDS) are gradually becoming more popular, particularly, among today's youth. Despite being marketed as safe by the tobacco industry, the notable absence of regulation in their composition is evident. Both the generated fluids and aerosol exhibit a wide variety of substances that are not yet fully identified. In addition to additives, the aerosol contains metals, the presence of which can be attributed to the excessive heating of metallic filaments used in vaporizing the liquid. Objective: This review aimed to identify and describe studies that have assessed metal levels in biological samples obtained from electronic cigarette users and those exposed to their second-hand aerosol. This involved detailing the types and concentrations of metals identified and the biological samples in which the metals were detected. Methods: Two independent researchers conducted searches in the MEDLINE and EMBASE databases to identify studies that measured the metal levels in human non-invasive biological samples from electronic cigarette users and second-hand exposure. Data were presented as a narrative review. Results: In total, 18 articles were included in this review. Overall active and passive exposure to ENDS was related to higher levels of many metals, including lead and cadmium, in biological samples. ENDS users, in general, have lower metal concentrations in biological samples compared to the users of combustible cigarettes. Conclusion: The exposure to primary and second-hand e-cigarette aerosol is related to higher metal concentrations in the biological samples. The adverse effects of this exposure on long-term users are yet to be determined.