Crystal structure determination and Hirshfeld surface analysis of N-acetyl-N-3-meth-oxy-phenyl and N-(2,5-di-meth-oxy-phen-yl)-N-phenyl-sulfonyl derivatives of N-[1-(phenyl-sulfon-yl)-1H-indol-2-yl]methanamine.

Two new [1-(phenyl-sulfon-yl)-1H-indol-2-yl]methanamine derivatives, namely, N-(3-meth-oxy-phen-yl)-N-{[1-(phenyl-sulfon-yl)-1H-indol-2-yl]meth-yl}acetamide, C24H22N2O4S, (I), and N-(2,5-di-meth-oxy-phen-yl)-N-{[1-(phenyl-sulfon-yl)-1H-indol-2-yl]meth-yl}benzene-sulfonamide, C29H26N2O6S2, (II), reveal a nearly orthogonal orientation of their indole ring systems and sulfonyl-bound phenyl rings. The sulfonyl moieties adopt the anti-periplanar conformation. For both compounds, the crystal packing is dominated by C-H⋯O bonding [C⋯O = 3.312 (4)-3.788 (8) Å], with the structure of II exhibiting a larger number, but weaker bonds of this type. Slipped π-π inter-actions of anti-parallel indole systems are specific for I, whereas the structure of II delivers two kinds of C-H⋯π inter-actions at both axial sides of the indole moiety. These findings agree with the results of Hirshfeld surface analysis. The primary contributions to the surface areas are associated with the contacts involving H atoms. Although II manifests a larger fraction of the O⋯H/H⋯O contacts (25.8 versus 22.4%), most of them are relatively distal and agree with the corresponding van der Waals separations.

Synthesis, structural studies and Hirshfeld surface analysis of 2-[(4-phenyl-1H-1,2,3-triazol-1-yl)methyl]pyridin-1-ium hexa-kis-(nitrato-κ2 O,O')thorate(IV).

Reaction of thorium(IV) nitrate with 2-[(4-phenyl-1H-1,2,3-triazol-1-yl)meth-yl]pyridine (L) yielded (LH)2[Th(NO3)6] or (C14H13N4)2[Th(NO3)6] (1), instead of the expected mixed-ligand complex [Th(NO3)4 L 2], which was detected in the mass spectrum of 1. In the structure, the [Th(NO3)6]2- anions display an icosa-hedral coordination geometry and are connected by LH+ cations through C-H⋯O hydrogen bonds. The LH+ cations inter-act via N-H⋯N hydrogen bonds. Hirshfeld surface analysis indicates that the most important inter-actions are O⋯H/H⋯O hydrogen-bonding inter-actions, which represent a 55.2% contribution.

Synthesis, crystal structure and Hirshfeld surface analysis of [1-(4-bromo-phen-yl)-1H-1,2,3-triazol-4-yl]methyl 2-(4-nitro-phen-oxy)acetate.

The title compound, C17H13BrN4O5, was synthesized by a Cu2Br2-catalysed Meldal-Sharpless reaction between 4-nitro-phen-oxy-acetic acid propargyl ether and para-bromo-phenyl-azide, and characterized by X-ray structure determination and 1H NMR spectroscopy. The mol-ecules, with a near-perpendicular orientation of the bromo-phenyl-triazole and nitro-phen-oxy-acetate fragments, are connected into a three-dimensional network by inter-molecular C-H⋯O and C-H⋯N hydrogen bonds (confirmed by Hirshfeld surface analysis), π-π and Br-π inter-actions.

Crystal structures, phase transition, and Hirshfeld surface analyses of the bromide and chloride congeners of aqua[2,4,6-tris(pyridin-4-yl)-1,3,5-triazine]zinc(II) halide.

During the course of exploring crystallization conditions in generating metal-organic frameworks (MOFs) for use in the crystalline sponge method, two discrete metal-organic complexes, namely, aqua[2,4,6-tris(pyridin-4-yl)-1,3,5-triazine]zinc(II) bromide, [Zn(C18H12N6)(H2O)]Br2, and aqua[2,4,6-tris(pyridin-4-yl)-1,3,5-triazine]zinc(II) chloride, [Zn(C18H12N6)(H2O)]Cl2, were encountered. Structures in the orthorhombic space group Pnma (No. 62) for the bromide congener at 299 K and the chloride congener at 100 K were obtained. A phase transition for the bromide congener occurred upon cooling from 299 to 100 K, yielding a crystal polymorph with four domains that exhibits monoclinic P21/m space-group symmetry (No. 11), which arises from conformational changes. The main intramolecular contacts that contribute to the crystal packing in all observed structures are H...H, Halide...H/H...Halide, C...H/H...C, and N...H/H...N. Intramolecular hydrogen bonding between the Zn-bound water and non-Zn-bound pyridyl N atoms is a prominent feature within the three-dimensional networks. Aromatic π-stacking between the non-Zn-bound pyridine rings and contacts involving the halide ligands further stabilize the crystal packing.

Crystal structure and Hirshfeld surface analysis of dimeth-yl(phen-yl)phosphine sulfide.

The title compound, C8H11PS, which melts below room temperature, was crystallized at low temperature. The P-S bond length is 1.9623 (5) Šand the major contributors to the Hirshfeld surface are H⋯H (58.1%), S⋯H/H⋯S (13.4%) and C⋯H/H⋯C contacts (11.7%).

Crystal structure and Hirshfeld surface analysis of 1-[6-bromo-2-(4-fluoro-phen-yl)-1,2,3,4-tetra-hydroquinolin-4-yl]pyrrolidin-2-one.

In the title compound, C19H18BrFN2O, the pyrrolidine ring adopts an envelope conformation. In the crystal, mol-ecules are linked by inter-molecular N-H⋯O, C-H⋯O, C-H⋯F and C-H⋯Br hydrogen bonds, forming a three-dimensional network. In addition, C-H⋯π inter-actions connect mol-ecules into ribbons along the b-axis direction, consolidating the mol-ecular packing. The inter-molecular inter-actions in the crystal structure were qu-anti-fied and analysed using Hirshfeld surface analysis.

Crystal structure and Hirshfeld surface analysis of 6,6'-dimethyl-2,2'-bi-pyridine-1,1'-diium tetra-chlorido-cobaltate(II).

In the title mol-ecular salt, (C12H14N2)[CoCl4], the dihedral angle between the pyridine rings of the cation is 52.46 (9)° and the N-C-C-N torsion angle is -128.78 (14)°, indicating that the ring nitro-gen atoms are in anti-clinal conformation. The Cl-Co-Cl bond angles in the anion span the range 105.46 (3)-117.91 (2)°. In the extended structure, the cations and anions are linked by cation-to-anion N-H⋯Cl and C-H⋯Cl inter-actions, facilitating the formation of R 4 4(18) and R 4 4(20) ring motifs. Furthermore, the crystal structure features weak anion-to-cation Cl⋯π inter-actions [Cl⋯π = 3.4891 (12) and 3.5465 (12) Å]. Hirshfeld two-dimensional fingerprint plots revealed that the most significant inter-actions are Cl⋯H/H⋯Cl (45.5%), H⋯H (29.0%), Cl⋯C/C⋯Cl (7.8%), Cl⋯N/N⋯Cl (3.5%), Cl⋯Cl (1.4) and Co⋯H (1%) contacts.

Crystal structure and Hirshfeld surface analysis of 2-bromo-ethyl-ammonium bromide - a possible side product upon synthesis of hybrid perovskites.

This study presents the synthesis, characterization and Hirshfeld surface analysis of a small organic ammonium salt, C2H7BrN+·Br-. Small cations like the one in the title compound are considered promising components of hybrid perovskites, crucial for optoelectronic and photovoltaic applications. While the incorporation of this organic cation into various hybrid perovskite structures has been explored, its halide salt counterpart remains largely uninvestigated. The obtained structural results are valuable for the synthesis and phase analysis of hybrid perovskites. The title compound crystallizes in the solvent-free form in the centrosymmetric monoclinic space group P21/c, featuring one organic cation and one bromide anion in its asymmetric unit, with a torsion angle of -64.8 (2)° between the ammonium group and the bromine substituent, positioned in a gauche conformation. The crystal packing is predominantly governed by Br⋯H inter-actions, which constitute 62.6% of the overall close atom contacts.

Synthesis, structure and Hirshfeld surface analysis of 2-oxo-2H-chromen-4-yl penta-noate.

In the title compound, C14H14O4, the dihedral angle between the coumarin ring system (r.m.s deviation = 0.016 Å) and the penta-noate ring is 36.26 (8)°. A short intra-molecular C-H⋯O contact of 2.40 Šis observed. Hirshfeld surface analysis reveals that 46.1% of the inter-molecular inter-actions are from H⋯H contacts, 28.6% are from H⋯O/O⋯H contacts and 14.7% are from H⋯C/C⋯H.

Crystal structure and Hirshfeld surface analysis of a halogen bond between 2-(allyl-thio)-pyridine and 1,2,4,5-tetra-fluoro-3,6-di-iodo-benzene.

The crystal structure of the title 2:1 mol-ecular complex between 2-(allyl-thio)-pyridine and 1,2,4,5-tetra-fluoro-3,6-di-iodo-benzene, C6F4I2·2C8H9NS, at 100 K has been determined in the monoclinic space group P21/c. The most noteworthy characteristic of the complex is the halogen bond between iodine and the pyridine ring with a short N⋯I contact [2.8628 (12) Å]. The Hirshfeld surface analysis shows that the hydrogen⋯hydrogen contacts dominate the crystal packing with a contribution of 32.1%.

Crystal structure and Hirshfeld surface analysis of dimethyl 2-oxo-4-(pyridin-2-yl)-6-(thio-phen-2-yl)cyclo-hex-3-ene-1,3-di-carboxyl-ate.

In the title compound, C19H17NO5S, the cyclo-hexene ring adopts nearly an envelope conformation. In the crystal, mol-ecules are linked by C-H⋯O hydrogen bonds, forming a three-dimensional network. In addition, C-H⋯π inter-actions connect the mol-ecules by forming layers parallel to the (010) plane. According to the Hirshfeld surface analysis, H⋯H (36.9%), O⋯H/H⋯O (31.0%), C⋯H/H⋯C (18.9%) and S⋯H/H⋯S (7.9%) inter-actions are the most significant contributors to the crystal packing.

The crystal structures and Hirshfeld surface analysis of three new bromo-substituted 3-methyl-1-(phenyl-sulfon-yl)-1H-indole derivatives.

Three new 1H-indole derivatives, namely, 2-(bromo-meth-yl)-3-methyl-1-(phenyl-sulfon-yl)-1H-indole, C16H14BrNO2S, (I), 2-[(E)-2-(2-bromo-5-meth-oxy-phen-yl)ethen-yl]-3-methyl-1-(phenyl-sulfon-yl)-1H-indole, C24H20BrNO3S, (II), and 2-[(E)-2-(2-bromo-phen-yl)ethen-yl]-3-methyl-1-(phenyl-sulfon-yl)-1H-indole, C23H18BrNO2S, (III), exhibit nearly orthogonal orientations of their indole ring systems and sulfonyl-bound phenyl rings. Such conformations are favourable for inter-molecular bonding involving sets of slipped π-π inter-actions between the indole systems and mutual C-H⋯π hydrogen bonds, with the generation of two-dimensional monoperiodic patterns. The latter are found in all three structures, in the form of supra-molecular columns with every pair of successive mol-ecules related by inversion. The crystal packing of the compounds is additionally stabilized by weaker slipped π-π inter-actions between the outer phenyl rings (in II and III) and by weak C-H⋯O, C-H⋯Br and C-H⋯π hydrogen bonds. The structural significance of the different kinds of inter-actions agree with the results of a Hirshfeld surface analysis and the calculated inter-action energies. In particular, the largest inter-action energies (up to -60.8 kJ mol-1) are associated with pairing of anti-parallel indole systems, while the energetics of weak hydrogen bonds and phenyl π-π inter-actions are comparable and account for 13-34 kJ mol-1.

Crystal structure and Hirshfeld surface of a penta-amine-copper(II) complex with urea and chloride.

The reaction of copper(II) oxalate and hexa-methyl-ene-tetra-mine in a deep eutectic solvent made of urea and choline chloride produced crystals of penta-amine-copper(II) dichloride-urea (1/1), [Cu(NH3)5]Cl2·CO(NH2)2, which was characterized by single-crystal X-ray diffraction. The complex contains discrete penta-amine-copper(II) units in a square-based pyramidal geometry. The overall structure of the multi-component crystal is dictated by hydrogen bonding between urea mol-ecules and amine H atoms with chloride anions.

Synthesis, crystal structure and Hirshfeld surface analysis of (3Z)-4-[(4-amino-1,2,5-oxa-diazol-3-yl)amino]-3-bromo-1,1,1-tri-fluoro-but-3-en-2-one.

In the title compound, C6H4BrF3N4O2, the oxa-diazole ring is essentially planar with a maximum deviation of 0.003 (2) Å. In the crystal, mol-ecular pairs are connected by N-H⋯N hydrogen bonds, forming dimers with an R 2 2(8) motif. The dimers are linked into layers parallel to the (10) plane by N-H⋯O hydrogen bonds. In addition, C-O⋯π and C-Br⋯π inter-actions connect the mol-ecules, forming a three-dimensional network. The F atoms of the tri-fluoro-methyl group are disordered over two sites in a 0.515 (6): 0.485 (6) ratio. The inter-molecular inter-actions in the crystal structure were investigated and qu-anti-fied using Hirshfeld surface analysis.

Crystal structure and Hirshfeld surface analysis of (Z)-4-oxo-4-{phen-yl[(thio-phen-2-yl)meth-yl]amino}-but-2-enoic acid.

In the title compound, C15H13NO3S, the mol-ecular conformation is stable with the intra-molecular O-H⋯O hydrogen bond forming a S(7) ring motif. In the crystal, mol-ecules are connected by C-H⋯O hydrogen bonds, forming C(8) chains running along the a-axis direction. Cohesion of the packing is provided by weak van der Waals inter-actions between the chains. A Hirshfeld surface analysis was undertaken to investigate and qu-antify the inter-molecular inter-actions. The thio-phene ring is disordered in a 0.9466 (17):0.0534 (17) ratio over two positions rotated by 180°.

Crystal structure characterization, Hirshfeld surface analysis, and DFT calculation studies of 1-(6-amino-5-nitro-naphthalen-2-yl)ethanone.

The title compound, C12H10N2O3, was obtained by the de-acetyl-ation reaction of 1-(6-amino-5-nitro-naphthalen-2-yl)ethanone in a concentrated sulfuric acid methanol solution. The mol-ecule comprises a naphthalene ring system bearing an acetyl group (C-3), an amino group (C-7), and a nitro group (C-8). In the crystal, the mol-ecules are assembled into a two-dimensional network by N⋯H/H⋯N and O⋯H/H⋯O hydrogen-bonding inter-actions. n-π and π-π stacking inter-actions are the dominant inter-actions in the three-dimensional crystal packing. Hirshfeld surface analysis indicates that the most important contributions are from O⋯H/H⋯O (34.9%), H⋯H (33.7%), and C⋯H/H⋯C (11.0%) contacts. The energies of the frontier mol-ecular orbitals were computed using density functional theory (DFT) calculations at the B3LYP-D3BJ/def2-TZVP level of theory and the LUMO-HOMO energy gap of the mol-ecule is 3.765 eV.

Crystal structure and Hirshfeld surface analysis of 3,3'-[ethane-1,2-diylbis(-oxy)]bis-(5,5-di-methyl-cyclo-hex-2-en-1-one) including an unknown solvate.

The title mol-ecule, C18H26O4, consists of two symmetrical halves related by the inversion centre at the mid-point of the central -C-C- bond. The hexene ring adopts an envelope conformation. In the crystal, the mol-ecules are connected into dimers by C-H⋯O hydrogen bonds with R 2 2(8) ring motifs, forming zigzag ribbons along the b-axis direction. According to a Hirshfeld surface analysis, H⋯H (68.2%) and O⋯H/H⋯O (25.9%) inter-actions are the most significant contributors to the crystal packing. The contribution of some disordered solvent to the scattering was removed using the SQUEEZE routine [Spek (2015 ▸). Acta Cryst. C71, 9-18] in PLATON. The solvent contribution was not included in the reported mol-ecular weight and density.

Stabilizing Bifurcated Hydrogen Bond in 8-Aminoquinoline Appended Peptides.

The hydrogen bonding interaction between an amide N-H and the amide N of the preceding residue is prevalent in proline-containing proteins and peptides. However, the N-H⋅⋅⋅N hydrogen bonding interaction is rare in non-prolyl natural peptides due to restricted dihedral angles. Herein, we stabilize this type of interaction in 8-aminoquinoline appended non-prolyl peptides through bifurcated N⋅⋅⋅H⋅⋅⋅N hydrogen bond. The 8-aminoquinoline-incorporated model peptides 2 a-i were designed, synthesized, and the crystal structures of 2 a-c and 2 i were solved. Analysis of crystal data reveals that the amide N-H of aminoquinoline is involved in bifurcated hydrogen bonding interaction with the nitrogen of the preceding amino acid residue and the nitrogen in quinoline. Analysis of crystal packing, Hirshfeld surface and fingerprint plots confirms that the intermolecular O⋅⋅⋅H contacts significantly contribute to stabilizing bifurcated N⋅⋅⋅H⋅⋅⋅N hydrogen bonding interaction. Furthermore, NMR experiments and CD spectroscopy were conducted to examine the preferred conformation in solution, and the data corroborate with the crystal structure conformation.

Crystal structure and Hirshfeld surface analysis of (Z)-4-({[2-(benzo[b]thio-phen-3-yl)cyclo-pent-1-en-1-yl]meth-yl}(phen-yl)amino)-4-oxobut-2-enoic acid.

In the title compound, C24H21NO3S, the cyclopentene ring adopts an envelope conformation. In the crystal, mol-ecules are linked by C-H⋯π inter-actions, forming ribbons along the a axis. Inter-molecular C-H⋯O hydrogen bonds connect these ribbons to each other, forming layers parallel to the (01) plane. The mol-ecular packing is strengthened by van der Waals inter-actions between the layers. The inter-molecular contacts were qu-anti-fied using Hirshfeld surface analysis and two-dimensional fingerprint plots, revealing the relative contributions of the contacts to the crystal packing to be H⋯H 46.0%, C⋯H/H⋯C 21.1%, O⋯H/H⋯O 20.6% and S⋯H/H⋯S 9.0%.

Crystal structure and Hirshfeld surface analysis of dimethyl 4'-bromo-3-oxo-5-(thio-phen-2-yl)-3,4,5,6-tetra-hydro-[1,1'-biphen-yl]-2,4-di-carboxyl-ate.

In the title compound, C20H17BrO5S, mol-ecules are connected by inter-molecular C-H⋯S hydrogen bonds with R 2 2(10) ring motifs, forming ribbons along the b-axis direction. C-H⋯π inter-actions consolidate the ribbon structure while van der Waals forces between the ribbons ensure the cohesion of the crystal structure. According to a Hirshfeld surface analysis, H⋯H (40.5%), O⋯H/H⋯O (27.0%), C⋯H/H⋯C (13.9%) and Br⋯H/H⋯Br (11.7%) inter-actions are the most significant contributors to the crystal packing. The thio-phene ring and its adjacent di-carboxyl-ate group and the three adjacent carbon atoms of the central hexene ring to which they are attached were refined as disordered over two sets of sites having occupancies of 0.8378 (15) and 0.1622 (15). The thio-phene group is disordered by a rotation of 180° around one bond.