Target-induced multiregion MNAzyme nanowires for ultrasensitive homogeneous detection of microRNAs.

A target-induced multiregion MNAzyme nanowire system is designed for the ultrasensitive and homogeneous detection of microRNAs (miRNAs). miRNA-21 and miRNA-375 are chosen as analytes, and a miRNA-induced primer exchange reaction (PER) is utilized to construct a long DNA strand with repetitive sequences. This innovative design enables the efficient anchoring of numerous MNAzymes. This unique architecture significantly boosts the effective local concentration of MNAzymes, thereby enhancing the sensitivity and efficiency of miRNA detection. Notably, the limit of detection (LOD) achieved with our target-induced multiregion MNAzyme nanowire approach is over an order of magnitude lower than most other MNAzyme-based methods, while the MNAzyme reaction time is reduced from several hours to 50 min. The method has demonstrated successful applications in quantitatively determining the expression levels of two miRNAs in cell lysates of MCF-7, HeLa and MCF-10 A cells, highlighting its potential for assaying miRNA biomarkers in clinical samples.

Highly Parallel Droplet Dispensing Approach to Provide Homogeneous and Controllable Droplet Arrays for Diagnostic Test Manufacturing.

We introduce a novel approach for highly parallel droplet dispensing with precise control over the droplet parameters such as droplet volume, droplet velocity, etc. This approach facilitates the fabrication of homogeneous and precise thin layers with uniform coverage on defined small areas (e.g., a specific area of 1 × 1.4 mm2 in microfluidic channels or microwells). The presented approach ensures layer uniformity and high precision in X/Y extent and edge resolution, making it well suited for achieving precise and controlled coating for a variety of applications such as homogeneous coatings for lateral flow tests, ELISA plates, and biosensors for continuous glucose monitoring (CGM) devices. Our approach is based on direct liquid displacement employing a piston that is in direct contact with the liquid and an array of nozzles. Considering a variety of nozzle chip designs (i.e., varying nozzle diameter and pitch), we evaluated a multitude of parameters to derive general design rules for the nozzle chip design. Thus, we achieved a tunable droplet volume from 200 to 800 pL and droplet velocities from 0.5 to 2.5 m/s, applying a nozzle diameter of 50 µm and a nozzle pitch of 165 µm. The presented results showcase the versatility of the approach, offering precise dispensing capabilities.

Palladium(II) and Platinum(II) Complexes Bearing ONS-Type Pincer Ligands: Synthesis, Characterization and Catalytic Investigations.

This work describes the synthesis of eight new Pd(II) and Pt(II) complexes with the general formula [M(TSC)Cl], where TSC represents the 4N-monosubstituted thiosemicarbazone derived from 2-acetylpyridine N-oxide with the substituents CH3 (H4MLO), C2H5 (H4ELO), phenyl (H4PLO) and (CH3)2 (H4DMLO). These complexes have been characterized by elemental analysis, molar conductivity, IR spectroscopy, 1H, 13C, 195Pt and ESI-MS. The complexes exhibit a square planar geometry around the metallic center coordinated by a thiosemicarbazone molecule acting as a donor ONS-type pincer ligand and by a chloride, as confirmed by the molecular structures of the complexes, [Pd(4ELO)Cl] (3) and [Pd(4PLO)Cl] (5), determined by single-crystal X-ray diffraction. The 195Pt NMR spectra of the complexes of formulae [Pt(4PLO)Cl] (6) and [Pt(4DMLO)Cl] (8) in DMSO show a single signal at -2420.4 ppm, confirming the absence of solvolysis products. Complexes 3 and 5 have been tested as catalysts in the Suzuki-Miyaura cross-coupling reactions of aryl bromides with phenylboronic acid, with yields of between 50 and 90.

Multi-Catalytic Metal-Based Homogeneous-Heterogeneous Systems in Organic Chemistry.

The combination of metal-based homogeneous and heterogeneous catalysts in the same reaction media is a powerful, yet relatively unexplored approach in organic chemistry. This strategy can address important limitations associated with purely homogeneous or heterogeneous catalysis such as the incompatibility of different catalytic species in solution, or the limited tunability of solid catalysts, respectively. Moreover, the facile reusability of the solid catalyst, contributes to increase the overall sustainability of the process. As a result, this semi-heterogeneous multi-catalytic approach has unlocked significant advances in organic chemistry, improving existing reactions and even enabling the discovery of novel transformations, exemplified by the formal alkane metathesis. This concept article aims to showcase the benefits of this strategy through exploration of diverse relevant examples from the literature, hoping to spur research on new metal-based homogeneous-heterogeneous catalyst combinations that will result in reactivity challenging to achieve by conventional homogeneous or heterogeneous catalysis alone.

Constructing Orbital Coupling-Modulated Homogeneous Dual-Atom Fe-Fe Sites for Boosting Bidirectional Conversion of Polysulfides.

Homogeneous dual-atom catalysts (HDACs) have garnered significant attention for their potential to overcome the shuttling effect and sluggish reaction kinetics in lithium-sulfur (Li-S) batteries. However, modulating the electron structure of metal atomic orbitals for HDACs to dictate the catalytic activity toward polysulfides has remained meaningful but unexplored so far. Herein, an interfacial cladding strategy is developed to obtain a new type of dual-atom iron matrix with a unique FeN2P1-FeN2P1 coordination structure (Fe2@NCP). The 3d orbital electrons of the Fe centers are redistributed by incorporating phosphorus atoms into the first coordination sphere. The theoretical calculations disclose that the strong coupling between the Fe d orbital and the S p orbital exhibits an enhanced Fe-S bond and improved reactivity toward polysulfides. Moreover, the Fe2@NCP catalyst achieves robust adsorption ability toward Li2Sn (1 ≤ n ≤ 8) and significantly boosts bidirectional sulfur redox reaction kinetics by lowering the Li2S deposition/decomposition energy barriers. Consequently, the assembled Li-S batteries present a high retention ratio of 77.3% after 500 cycles at 1C. Furthermore, the Li-S pouch cell also exhibits good performance at 0.1C (80.2% retention over 100 cycles) for practical application with a sulfur loading of 4.0 mg/cm2. The outcome of this study will facilitate the design of homogeneous dual-atom catalysts for Li-S batteries.

Highly sensitive turn-on electrochemical sensing of organophosphorus pesticides by integration of homogeneous reaction and heterogeneous catalytic signal amplification.

Enzyme-inhibited electrochemical sensor is a promising strategy for detecting organophosphorus pesticides (OPs). However, the poor stability of enzymes and the high oxidation potential of thiocholine signal probe limit their potential applications. To address this issue, an indirect strategy was proposed for highly sensitive and reliable detection of chlorpyrifos by integrating homogeneous reaction and heterogeneous catalysis. In the homogeneous reaction, Hg2+ with low oxidation potential was employed as signal probe for chlorpyrifos detection since its electroactivity can be inhibited by thiocholine, which was the hydrolysate of acetylthiocholine catalyzed by acetylcholinesterase. Additionally, Co,N-doped hollow porous carbon nanocage@carbon nanotubes (Co,N-HPNC@CNT) derived from ZIF-8@ZIF-67 was utilized as high-performance electrode material to amplify the stripping voltammetry signal of Hg2+. Thanks to their synergistic effect, the sensor exhibited outstanding sensing performance, excellent stability and good anti-interference ability. This strategy paves the way for the development of high-performance OP sensors and their application in food safety.

Microenvironment modulation of interpenetrating-type hierarchical porous foam carbon by mild-homogeneous activation for H2 storage and CO2 capture under ambient pressure.

Currently, carbon-based porous materials for hydrogen (H2) storage and carbon dioxide (CO2) capture are mostly applied at higher pressures (30-300 bar). However, applications for H2 storage and CO2 capture under ambient pressure conditions are significant for the development of portable, household, and miniaturized H2 energy technologies. This demands a higher standard for the interface microenvironment of adsorbents. Derived from polyurethane foams (PUFs) solid waste, the hierarchical porous foam carbon with interpenetrating-type pore structures exhibits high specific surface area (SBET = 1753 m2/g), abundant oxygen and nitrogen functional groups, and a hierarchical nanopore structure (VUltra = 0.232 cm3/g, VMicro = 0.628 cm3/g and VMeso = 0.186 cm3/g) through the mild-homogeneous sonication-assisted activation process. Under the limited adsorption of pore interface microenvironment composed by hierarchical nanopore structure and dipole-induced interaction (H(Ⅱ)-H(Ⅰ)···N/O and O(Ⅱ) = C(Ⅰ) = O(Ⅱ)···N/O), it exhibits an excellent H2 storage density (2.92 wt% at 77 K, 1 bar) and CO2 capture capacity (5.28 mmol/g at 298 K, 1 bar). This research approach can serve as a reference for the dual-functional design of porous foam carbon, and promote the development of adsorption materials for CO2 capture and energy gas storage under ambient conditions.

Characterization and Application of Cyrene as a Biomass-Based Solvent for Homogeneous Heck-Coupling Reaction.

Cyrene, a renewable, non-toxic substance having negligible vapor pressure, even at high temperatures, was proposed as a reaction medium for homogeneous Pd-catalyzed Heck-coupling reactions. It was first characterized by its temperature-dependent physicochemical properties, i.e., vapor pressure, density, surface tension, heat capacity, and viscosity, the key parameters of its reaction and process chemistry. Its refractive indices in the function of temperature were also determined. Hereafter, the effect of reaction parameters (Pd source, nature of the base, the water content of the reaction mixture, leaving group (-I, -Br, -Cl, and -OTf of aromatic substrates) on Pd-catalyzed Heck-coupling reaction was investigated using iodobenzene and styrene as model substrates. Subsequently, 4-substituted iodobenzene and styrene derivatives were applied to investigate the effect of electronic parameters on the reaction efficiency and functional group tolerance. To demonstrate the applicability of the system, thirteen stilbene derivatives were isolated with good to high yields and purity (> 95%) using 0.2 mol% of Pd, 1.5 eq. of Et3N as a base, in 1 mL of Cyrene for 2 h at 100 °C.

Biomolecule-regulation of fluorescent probe signaling: Homogeneous rapid portable protease sensing in serum.

BACKGROUND: As is well documented, prostate cancer (PCa) being the second most prevalent cancer in men worldwide, emphasizing the importance of early diagnosis for prognosis. However, conventional prostate-specific antigen (PSA) testing lacks sufficient diagnostic efficiency due to its relatively low sensitivity and limited detection range. Mounting evidence suggests that matrix metalloproteinase 9 (MMP-9) expression increases with the aggressive behavior of PCa, highlighting the significance of detecting the serum level of MMP-9 in patients. Developing a non-immune rapid, portable MMP-9 detection strategy and investigating its representativeness of PCa serum markers hold considerable implications. RESULTS: Herein, our study developed a simple, homogeneous dual fluorescence and smartphone-assisted red-green-blue (RGB) visualization peptide sensor of MMP-9, utilizing cadmium telluride quantum dots (CdTe QDs) and calcein as signal reporters. The essence of our approach revolves around the proteolytic ability of MMP-9, exploiting the selective recognition of molecule-Cu2+ complexes with different molecular weights by CdTe QDs and calcein. Under optimized conditions, the limits of detection (LODs) for MMP-9 were 0.5 pg/mL and 6 pg/mL using fluorescence and RGB values readouts, respectively. Indeed, this strategy exhibited robust specificity and anti-interference ability. MMP-9 was quantified in 42 clinical serum samples via dual-fluorescence analysis, with 12 samples being visually identified with a smartphone. According to receiver operating characteristic curve (ROC) analysis, its sensitivity and specificity were 90 % and 100 %, respectively, with an area under curve (AUC) value of 0.903. SIGNIFICANCE AND NOVELTY: Of note, the results of the aforementioned analysis were highly consistent with the serum level of PSA, clinical color Doppler flow imaging (CDFI), and histopathological results. Therefore, this simple, rapid, homogeneous fluorescence and visualization strategy can reliably measure MMP-9 levels and exhibit promising potential in point-of-care testing (POCT) applications for PCa patients.

Elucidating the Mechanism of Iron-Catalyzed Graphitization: The First Observation of Homogeneous Solid-State Catalysis.

Carbon is a critical material for existing and emerging energy applications and there is considerable global effort in generating sustainable carbons. A particularly promising area is iron-catalyzed graphitization, which is the conversion of organic matter to graphitic carbon nanostructures by an iron catalyst. In this paper, it is reported that iron-catalyzed graphitization occurs via a new type of mechanism that is called homogeneous solid-state catalysis. Dark field in situ transmission electron microscopy is used to demonstrate that crystalline iron nanoparticles "burrow" through amorphous carbon to generate multiwalled graphitic nanotubes. The process is remarkably fast, particularly given the solid phase of the catalyst, and in situ synchrotron X-ray diffraction is used to demonstrate that graphitization is complete within a few minutes.

Sterically Controlled Lewis Acid-Base Interaction Toward para-Selective Borylation of Aromatic Aldimines and Benzylamines.

Site-selective C-H bond functionalization of arenes at the para position remains extremely challenging primarily due to its relative inaccessibility from the catalytic site. As a consequence, it is significantly restricted to the limited molecular scaffolds. Herein, we report a method for the para-C-H borylation of aromatic aldimines and benzylamines using commercially available ligands under iridium catalysis. The established method displayed excellent para-selectivity for variously substituted aromatic aldimines, benzylamines and bioactive molecules. Based on the several control experiments, it has been realized that a Lewis acid-base interaction between the nitrogen and boron functionality guides the para selectivity via a steric shield for the aromatic aldimines, where Bpin acts as a transient directing group. However, the steric shield of the in situ generated N-Bpin moiety controlled the overall selectivity for the para borylation of benzylamines.

An Electrolyte Engineered Homonuclear Copper Complex as Homogeneous Catalyst for Lithium-Sulfur Batteries.

Lithium-sulfur (Li-S) batteries suffer from severe polysulfide shuttle, retarded sulfur conversion kinetics and notorious lithium dendrites, which has curtailed the discharge capacity, cycling lifespan and safety. Engineered catalysts act as a feasible strategy to synchronously manipulate the evolution behaviors of sulfur and lithium species. Herein, a chlorine bridge-enabled binuclear copper complex (Cu-2-T) is in situ synthesized in electrolyte as homogeneous catalyst for rationalizing the Li-S redox reactions. The well-designed Cu-2-T provides completely active sites and sufficient contact for homogeneously guiding the Li2S nucleation/decomposition reactions, and stabilizing the lithium working interface according to the synchrotron radiation X-ray 3D nano-computed tomography, small angle neutron scattering and COMSOL results. Moreover, Cu-2-T with the content of 0.25 wt% approaching saturated concentration in electrolyte further boosts the homogeneous optimization function in really operated Li-S batteries. Accordingly, the capacity retention of the Li-S battery is elevated from 51.4% to 86.3% at 0.2 C, and reaches 77.0% at 1.0 C over 400 cycles. Furthermore, the sulfur cathode with the assistance of Cu-2-T realizes the stable cycling under the practical scenarios of soft-packaged pouch cell and high sulfur loading (6.5 mg cm-2 with the electrolyte usage of 4.5 µL mgS -1).

Analysis of factors influencing on Electro-Fenton and research on combination technology (II): a review.

The principle of Fenton reagent is to produce ·OH by mixing H2O2 and Fe2+ to realize the oxidation of organic pollutants, although Fenton reagent has the advantages of non-toxicity and short reaction time, but there are its related defects. The Fenton-like technology has been widely studied because of its various forms and better results than the traditional Fenton technology in terms of pollutant degradation efficiency. This paper reviews the electro-Fenton technology among the Fenton-like technologies and provides an overview of the homogeneous electro-Fenton. It also focuses on summarizing the effects of factors such as H2O2, reactant concentration, reactor volume and electrode quality, reaction time and voltage (potential) on the efficiency of electro-Fenton process. It is shown that appropriate enhancement of H2O2 concentration, voltage (potential) and reaction volume can help to improve the process efficiency; the process efficiency also can be improved by increasing the reaction time and electrode quality. Feeding modes of H2O2 have different effects on process efficiency. Finally, a considerable number of experimental studies have shown that the combination of electro-Fenton with ultrasound, anodic oxidation and electrocoagulation technologies is superior to the single electro-Fenton process in terms of pollutant degradation.

An LF-NMR homogeneous sensor for highly sensitive and precise detection of E. coli based on target-triggered CuAAC click reaction.

In this study, a low field nuclear magnetic resonance (LF-NMR) homogeneous sensor was constructed for detection of Escherichia coli (E. coli) based on the copper metabolism of E. coli triggered click reaction. When live E. coli was present, a large amount of Cu2+ ions were transformed into Cu+ via copper metabolism, which then catalyzed a Cu+-catalyzed azide-alkyne cycloaddition (CuAAC) reaction between two materials, azide group modified gadolinium oxide nanorods (Gd2O3-Az) and PA-GO@Fe3O4 i.e., graphene oxide (GO) loaded with large amounts of alkynyl (PA) groups and Fe3O4 nanoparticles simultaneously. After magnetic separation, unbound Gd2O3-Az was dissolved by added hydrochloric acid (HCl) to generate homogeneous Gd3+ solution, enabling homogeneous detection of E. coli. Triple signal amplification was achieved through the CuAAC reaction induced by E. coli copper metabolism, functional nanomaterials, and HCl assisted homogeneous detection. Under the optimal experimental conditions, the linear range and limit of detection (LOD) for E. coli were 10-1.0 × 107 CFU/mL and 3.5 CFU/mL, respectively, and the relative standard deviations (RSDs) were all less than 2.8 %. In addition, the sensor has satisfactory selectivity, stability and practical sample application capability, providing a new approach for the LF-NMR detection of food-borne pathogenic bacteria.

Surface-catalyzed liquid-liquid phase separation and amyloid-like assembly in microscale compartments.

Liquid-liquid phase separation is a key phenomenon in the formation of membrane-less structures within the cell, appearing as liquid biomolecular condensates. Protein condensates are the most studied for their biological relevance, and their tendency to evolve, resulting in the formation of aggregates with a high level of order called amyloid. In this study, it is demonstrated that Human Insulin forms micrometric, round amyloid-like structures at room temperature within sub-microliter scale aqueous compartments. These distinctive particles feature a solid core enveloped by a fluid-like corona and form at the interface between the aqueous compartment and the glass coverslip upon which they are cast. Quantitative fluorescence microscopy is used to study in real-time the formation of amyloid-like superstructures. Their formation results driven by liquid-liquid phase separation process that arises from spatially heterogeneous distribution of nuclei at the glass-water interface. The proposed experimental setup allows modifying the surface-to-volume ratio of the aqueous compartments, which affects the aggregation rate and particle size, while also inducing fine alterations in the molecular structures of the final assemblies. These findings enhance the understanding of the factors governing amyloid structure formation, shedding light on the catalytic role of surfaces in this process.

Nickel-catalysed enantioselective alkene dicarbofunctionalization enabled by photochemical aliphatic C-H bond activation.

The development of novel strategies to rapidly construct complex chiral molecules from readily available feedstocks is a long-term pursuit in the chemistry community. Radical-mediated alkene difunctionalizations represent an excellent platform towards this goal. However, asymmetric versions remain highly challenging, and more importantly, examples featuring simple hydrocarbons as reaction partners are elusive. Here we report an asymmetric three-component alkene dicarbofunctionalization capitalizing on the direct activation of C(sp 3)-H bonds through the combination of photocatalysed hydrogen atom transfer and nickel catalysis. This protocol provides an efficient platform for installing two vicinal carbon-carbon bonds across alkenes in an atom-economic fashion, providing a wide array of high-value chiral α-aryl/alkenyl carbonyls and phosphonates, as well as 1,1-diarylalkanes from ubiquitous alkane, ether and alcohol feedstocks. This method exhibits operational simplicity, broad substrate scope and excellent regioselectivity, chemoselectivity and enantioselectivity. The compatibility with bioactive motifs and expedient synthesis of pharmaceutically relevant molecules highlight the synthetic potential of this protocol.

Portable Near-Infrared to Near-Infrared Platform for Homogeneous Quantification of Biomarkers in Complex Biological Samples.

Förster resonance energy transfer (FRET)-based homogeneous immunoassay obviates tedious washing steps and thus is a promising approach for immunoassays. However, a conventional FRET-based homogeneous immunoassay operating in the visible region is not able to overcome the interference of complex biological samples, thus resulting in insufficient detection sensitivity and poor accuracy. Here, we develop a near-infrared (NIR)-to-NIR FRET platform (Ex = 808 nm, Em = 980 nm) that enables background-free high-throughput homogeneous quantification of various biomarkers in complex biological samples. This NIR-to-NIR FRET platform is portable and easy to operate and is mainly composed of a high-performance NIR-to-NIR FRET pair based on lanthanide-doped nanoparticles (LnNPs) and a custom-made microplate reader for readout of NIR luminescence signals. We demonstrate that this NIR-to-NIR FRET platform is versatile and robust, capable of realizing highly sensitive and accurate detection of various critical biomarkers, including small molecules (morphine and 1,25-dihydroxyvitamin D), proteins (human chorionic gonadotropin), and viral particles (adenovirus) in unprocessed complex biological samples (urine, whole blood, and feces) within 5-10 min. We expect this NIR-to-NIR FRET platform to provide low-cost healthcare for populations living in resource-limited areas and be widely used in many other fields, such as food safety and environmental monitoring.

Direct excitation strategy for deacylative couplings of ketones.

The homolysis of chemical bonds represents one of the most fundamental reactivities of excited molecules. Historically, it has been exploited to generate radicals under ultraviolet (UV) light irradiation. However, unlike most contemporary radical-generating mechanisms, the direct excitation to homolyze chemical bonds and produce aliphatic carbon-centered radicals under visible light remains rare, especially in metallaphotoredox cross couplings. Herein, we present our design of the dihydropyrimidoquinolinone (DHPQ) reagents derived from ketones, which can undergo formal deacylation and homolytic C-C bond cleavage to release alkyl radicals without external photocatalysts. Spectroscopic and computational analysis reveal unique optical and structural features of DHPQs, rationalizing their faster kinetics in alkyl radical generation than a structurally similar but visible-light transparent radical precursor. Such a capability allows DHPQ to facilitate a wide range of Ni-metallaphotoredox cross couplings with aryl, alkynyl and acyl halides. Other catalytic and non-catalyzed alkylative transformations of DHPQs are also feasible with various radical acceptors. We believe this work would be of broad interest, aiding the synthetic planning with simplified operation and expanding the synthetic reach of photocatalyst-free approaches in cutting-edge research.

Bridging-Solvent Strategy for Quasi-Single-Crystal Perovskite Films and Stable Solar Cells.

Controllable fabrication of formamidinium (FA)-based perovskite solar cells (PSCs) with both high efficiency and long-term stability is the key to their further commercialization. However, the diversity of PbI2 complexes and perovskite compositions usually leads to light sensitive PbI2 residues and phase impurities in the film, which can accelerate the device degradation. Here, the crystallization kinetics of FA-based perovskite films are studied and a bridging-solvent strategy is proposed to modulate the reaction kinetics between PbI2 and ammonium salts by prohibiting the formation of undesired intermediates. N-methylpyrrolidone (NMP) solvent is introduced into the PbI2 precursor solution to obtain stable and homogeneous PbI2-NMP complex films. The strong interaction between NMP and formamidinium iodide (FAI) molecules promotes the conversion from PbI2-NMP into (001)-oriented quasi-single-crystal perovskite films with negligible impurities, long carrier lifetime of 1.5 µs and a large grain size of 3 µm. The optimized PSCs exhibit a high power conversion efficiency of 24.1%, as well as superior shelf stability which maintains 95% initial efficiency after storage in air for 1200 h (T95 = 1200 h), and operating stability with T96 = 300 h under continuous working at the maximum power point. This work offers a simple and reproducible method for fabricating phase-pure and uniaxially oriented perovskite films.

Methane Formation Induced via Face-to-Face Orientation of Cyclic Fe Porphyrin Dimer in Photocatalytic CO2 Reduction.

Iron porphyrins are known to provide CH4 as an eight-electron reduction product of CO2 in a photochemical reaction. However, there are still some aspects of the reaction mechanism that remain unclear. In this study, we synthesized iron porphyrin dimers and carried out the photochemical CO2 reduction reactions in N,N-dimethylacetamide (DMA) containing a photosensitizer in the presence of 1,3-dimethyl-2-phenyl-2,3-dihydro-1H-benzo[d]imidazole (BIH) as an electron donor. We found that, despite a low catalytic turnover number, CH4 was produced only when these porphyrins were facing each other. The close proximity of the cyclic dimers, distinguishing them from a linear Fe porphyrin dimer and monomers, induced multi-electron CO2 reduction, emphasizing the unique role of their structural arrangement in CH4 formation.