Green synthesis of non-isocyanate hydroxyurethane and its hybridization with carboxymethyl cellulose to produce films.

Non-isocyanate polyurethanes (NIPUs) have attracted increasing attention as a sustainable alternative to conventional isocyanate-based polyurethanes. This study synthesized non-isocyanate hydroxyurethanes (NIHUs) through an addition reaction between propylene carbonate (PC) and 1,2-ethylenediamine (EDA). The resulting NIHU was then hybridized with carboxymethyl cellulose (CMC) to investigate its hybridization potential. Structural analysis through FTIR, NMR, and XRD confirmed the crystalline nature of NIHU, featuring urethane bonds and abundant hydroxyl groups. It was found that NIHU and CMC interacted by forming hydrogen bonds between hydroxyl groups of NIHU and carboxyl groups of CMC, resulting in a dense CMC/NIHU hybrid structure. NMR and XRD analyses revealed changes in the hybrids' chain mobility, the Young's modulus of the hybrid with 30 % NIHU content decreased from 1627 MPa to 502 MPa relative to CMC, and the elongation at break increased from 4.44 % to 17.2 %. Increasing the concentration of NIHU in CMC reduced the hydrophobicity, in terms of water contact angle, from 70° to 41.7°. The simplicity of the synthesis method for NIHU, coupled with the desirable structure, strength, and balanced flexibility of CMC/NIHU hybrids, is expected to facilitate the production of NIHU-rich hybrids and increase their application in packaging.

Non-isocyanate Synthesis of Covalent Adaptable Networks Based on Dynamic Hindered Urea Bonds: Sequential Polymerization and Chemical Recycling.

The development of environmentally sustainable processes for polymer recycling is of paramount importance in the polymer industry. In particular, the implementation of chemical recycling for thermoset polymers via covalent adaptable networks (CANs), particularly those based on the dynamic hindered urea bond (HUB), has garnered intensive attention from both the academic and industrial sectors. This interest stems from its straightforward chemical structure and reaction mechanism, which are well-suited for commercial polyurethane and polyurea applications. However, a substantial drawback of these CANs is the requisite use of toxic isocyanate curing agents for their synthesis. Herein, we propose a new HUB synthesis pathway involving thiazolidin-2-one and a hindered amine. This ring-opening reaction facilitates the isocyanate-free formation of a HUB and enables sequential reactions with acrylate and epoxide monomers via thiol-Michael and thiol-epoxy click chemistry. The CANs synthesized using this methodology exhibit superior reprocessability, chemical recyclability, and reutilizability, facilitated by specific catalytic and solvent conditions, through the reversible HUB, thiol-Michael addition, and transesterification processes.

Non-isocyanate polyurethane-co-polyglycolic acid electrospun nanofiber membrane wound dressing with high biocompatibility, hemostasis, and prevention of chronic wound formation.

The prevention of chronic wound formation has already been a primary subject in wound management, particularly for deep wounds. The electrospun nanofiber membranes hold tremendous potential in the prevention of chronic wounds due to their micro/nano pore structures. Currently, many natural and synthetic materials have been utilized in the fabrication of nanofiber membranes. However, striking a balance between the structural stability and the biocompatibility remains challenging. It is necessary not only to ensure the long-term durability of nanofiber membranes but also to enhance their biocompatibility for alleviating patients' suffering. In this study, we reported a nanofiber membrane dressing with excellent biocompatibility and mechanical properties, which is potential for the treatment of deep wounds. The basal material chosen for the preparation of the nanofiber membrane was a co-polyester (NI-LPGD5) synthesized by non-isocyanate polyurethane (NIPU) and polyglycolic acid with a dihydroxy structure (LPGD-synthesized from glycolic acid and neopentyl glycol). Moreover, curcumin was also added as a bioactive substance to enhance the pro-healing effect of dressings. The physicochemical properties of the prepared nanofiber membranes were characterized through various physicochemical tools. Our results demonstrated that the NI-LPGD5 co-polymer can be electrospun into smooth fibers. Meanwhile, curcumin-loaded nanofiber membranes (Cur/NI-LPGD5) also exhibited a favorable microscopic morphology. The fabricated membranes exhibited suitable mechanical properties, outstanding hygroscopic-swelling rate and water vapor transmittance. Besides, in vitro cell culturing, the cells on the NI-LPGD5 membrane maintained their maximum viability. The potential of in vivo wound healing was further demonstrated through animal experiments. The experimental results showed that the nanofiber membranes effectively prevented chronic wounds from forming and promoted granulation tissue growth without replacing the dressing throughout the healing process. We also found that these nanofiber membranes could effectively promote the expression of related biomarkers to accelerate wound healing, particularly the Cur/NI-LPGD5 membrane. In conclusion, the fabricated membranes possess suitable physicochemical properties and promising bioactivity. As a result, it effectively prevented the formation of chronic wounds and demonstrated significant potential in reducing the frequency of dressing changes.

Influence of fullerene content on the properties of polyurethane resins: A study of rheology and thermal characteristics.

The effect of different contents of fullerene on the properties of polyurethane resins (PUs), including rheology and thermal properties, was investigated. Polyurethane resins were prepared through polyaddition reactions using different isocyanate monomers such as isophorone diisocyanate (IPDI), methylene diphenyl diisocyanate (MDI), hexamethylene diisocyanate (HDI), and different polyols, such as poly(oxytetramethylene) glycol (PTMG), the triol trade name FA-703, and polypropylene glycols (PPG), at an NCO/OH ratio 0.94 and a temperature of 100 °C. IR spectroscopy was used to control the polymerization of PUs through the shifting of NCO peaks. The results showed that the rheology and thermal properties of the prepared PU resins depend on the type of isocyanates and fullerene used. Based on the type of isocyanates, the PU resin prepared by MDI has the highest viscosity and thermal stability compared to the other isocyanates investigated. On the other hand, the PU resins prepared by IPDI mixed with fullerene had the highest viscosity and thermal stability. However, the initial decomposition temperature (T onset) of the PUs decreased with the addition of fullerene without affecting the maximum decomposition temperature (PDT max) of the PU resin.

Evaluation of Monomer-containing Isocyanate Groups on Stabilizing Demineralized Dentin Matrix Against Bond Interface Degradation.

PURPOSE: To evaluate the effect of urethane methacrylate precursor (UMP) on the enzymatic resistance of demineralized dentin (DD) matrices. MATERIALS AND METHODS: Experimental treatments containing 0 (control), 1, and 5 mmol/L UMP dissolved in an acetone (Ace) solution were formulated. Dentin matrix specimens were demineralized in vitro and immersed in the experimental treatments for 1 h. The treated specimens were then stored in 0.1 mg/mL collagenase solution for 24 h, after which their dry mass loss and hydroxyproline (HYP) release were assessed. The swelling ratios of specimens in each group were also evaluated. The interaction between UMP and the dentin matrix was observed using field-emission scanning electron microscopy (FE-SEM). Endogenous enzyme activity in dentin was evaluated using confocal laser scanning microscopy (CLSM). RESULTS: Compared with the other treatment groups, treatment with 1 mM and 5 mM UMP-Ace significantly decreased the dry mass loss, HYP release and swelling ratio of the DD matrix (p < 0.05). FE-SEM and CLSM observations showed that treatment with UMP-Ace protected the structure of the dentin matrix and decreased porosity within the dentin-collagen network. CONCLUSION: Treatment with 1 mM and 5 mM UMP-Ace protects DD matrix against collagenase degradation and may be clinically useful for improving the durability of the hybrid layer.

Green, facile synthesis and evaluation of unsymmetrical carbamide derivatives as antimicrobial and anticancer agents with mechanistic insights.

A very practical method for the synthesis of unsymmetrical carbamide derivatives in good to excellent yield was presented, without the need for any catalyst and at room temperature. Using a facile and robust protocol, fifteen unsymmetrical carbamide derivatives (9-23) bearing different aliphatic amine moieties were designed and synthesized by the reaction of secondary aliphatic amines with isocyanate derivatives in the presence of acetonitrile as an appropriate solvent in good to excellent yields. Trusted instruments like IR, mass spectrometry, NMR spectra, and elemental analyses were employed to validate the purity and chemical structures of the synthesized compounds. All the synthesized compounds were tested as antimicrobial agents against some clinically bacterial pathogens such as Salmonella typhimurium, Bacillus subtilis, Pseudomonas aeruginosa, Staphylococcus aureus and Candida albicans. Compounds 15, 16, 17, 19 and 22 showed potent antimicrobial activity with promising MIC values compared to the positive controls. Moreover, compounds 15 and 22 provide a potent lipid peroxidation (LPO) of the bacterial cell wall. On the other hand, we investigated the anti-proliferative activity of compounds 9-23 against selected human cancerous cell lines of breast (MCF-7), colon (HCT-116), and lung (A549) relative to healthy noncancerous control skin fibroblast cells (BJ-1). The mechanism of their cytotoxic activity has been also examined by immunoassaying the levels of key anti- and pro-apoptotic protein markers. The results of MTT assay revealed that compounds 10, 13, 21, 22 and 23 possessed highly cytotoxic effects. Out of these, three synthesized compounds 13, 21 and 22 showed cytotoxicity with IC50 values (13, IC50 = 62.4 ± 0.128 and 22, IC50 = 91.6 ± 0.112 µM, respectively, on MCF-7), (13, IC50 = 43.5 ± 0.15 and 21, IC50 = 38.5 ± 0.17 µM, respectively, on HCT-116). Cell cycle and apoptosis/necrosis assays demonstrated that compounds 13 and 22 induced S and G2/M phase cell cycle arrest in MCF-7 cells, while only compound 13 had this effect on HCT-116 cells. Furthermore, compound 13 exhibited the greatest potency in inducing apoptosis in both cell lines compared to compounds 21 and 22. Docking studies indicated that compounds 10, 13, 21 and 23 could potentially inhibit enzymes and exert promising antimicrobial effects, as evidenced by their lower binding energies and various types of interactions observed at the active sites of key enzymes such as Sterol 14-demethylase of C. albicans, Dihydropteroate synthase of S. aureus, LasR of P. aeruginosa, Glucosamine-6-phosphate synthase of K. pneumenia and Gyrase B of B. subtilis. Moreover, 13, 21, and 22 demonstrated minimal binding energy and favorable affinity towards the active pocket of anticancer receptor proteins, including CDK2, EGFR, Erα, Topoisomerase II and VEGFFR. Physicochemical properties, drug-likeness, and ADME (absorption, distribution, metabolism, excretion, and toxicity) parameters of the selected compounds were also computed.

Physicochemical and Mechanical Properties of Non-Isocyanate Polyhydroxyurethanes (NIPHUs) from Epoxidized Soybean Oil: Candidates for Wound Dressing Applications.

Only 0.1% of polyurethanes available on the market are from renewable sources. With increasing concern about climate change, the substitution of monomers derived from petrochemical sources and the application of eco-friendly synthesis processes is crucial for the development of biomaterials. Therefore, polyhydroxyurethanes have been utilized, as their synthesis route allows for the carbonation of vegetable oils with carbon dioxide and the substitution of isocyanates known for their high toxicity, carcinogenicity, and petrochemical origin. In this study, polyhydroxyurethanes were obtained from carbonated soybean oil in combination with two diamines, one that is aliphatic (1,4-butadiamine (putrescine)) and another that is cycloaliphatic (1,3-cyclohexanobis(methylamine)). Four polyhydroxyurethanes were obtained, showing stability in hydrolytic and oxidative media, thermal stability above 200 °C, tensile strength between 0.9 and 1.1 MPa, an elongation at break between 81 and 222%, a water absorption rate up 102%, and contact angles between 63.70 and 101.39. New formulations of bio-based NIPHUs can be developed with the inclusion of a cycloaliphatic diamine (CHM) for the improvement of mechanical properties, which represents a more sustainable process for obtaining NIPHUs with the physicochemical, mechanical, and thermal properties required for the preparation of wound dressings.

Oxidized Starch-Reinforced Aqueous Polymer Isocyanate Cured with High-Frequency Heating.

In this research, an oxidized starch/styrene-butadiene rubber system with high capability of absorbing electromagnetic energy was adopted as the main component, the effect of oxidized starch content on the bonding and mechanical properties of aqueous polymer isocyanate (API) after high-frequency curing was evaluated, and the effect mechanisms were explored by combining thermodynamic tests and material characterization methods. Our findings revealed that the addition of oxidized starch enhanced the mechanical properties of API after high-frequency curing and the increase in the amount of oxidized starch enhanced the improvement effect of high-frequency curing on API bonding and mechanical properties. At 5 wt% oxidized starch, high-frequency curing improved API bonding properties by 18.0% and 17.3% under ambient conditions and after boiling water aging, respectively. An increase in oxidized starch content to 25 wt% increased enhancement to 25.1% and 26.4% for the above conditions, respectively. The enhancement effects of tensile strength and Young's modulus of the API adhesive body were increased from 9.4% and 18.2% to 18.7% and 22.6%, respectively. The potential enhancement mechanism could be that oxidized starch could increase the dielectric loss of API, converting more electromagnetic energy into thermal energy creating more cross-linked structures.

Non-Isocyanate Urethane Acrylate Derived from Isophorone Diamine: Synthesis, Characterization and Its Application in 3D Printing.

In this paper, urethane-based acrylates (UA) were prepared via an environmentally friendly non-isocyanate route. Isophorone diamine (IPDA) reacted with ethylene carbonate (EC), producing carbamate containing amine and hydroxyl groups, which further reacted with neopentyl glycol diacrylate (NPGDA) by aza Michael addition, forming UA. The structures of the obtained intermediates and UA were characterized by 1H NMR and electrospray ionization high-resolution mass spectrometry (ESI-HRMS). The photopolymerization kinetics of UA were investigated by infrared spectroscopy. The composite with obtained UA can be UV cured quickly to form a transparent film with a tensile strength of 21 MPa and elongation at break of 16%. After UV curing, the mono-functional urethane acrylate was copolymerized into the cross-linked network in the form of side chains. The hydroxyl and carbamate bonds on the side chains have high mobility, which make them easy to form stronger dynamic hydrogen bonds during the tensile process, giving the material a higher tensile strength and elongation at break. Therefore, the hydrogen bonding model of a cross-linked network is proposed. The composite with UA can be 3D printed into models.

Enabling Modular Click Chemistry Library through Sequential Ligations of Carboxylic Acids and Amines.

High-throughput synthesis and screening of chemical libraries play pivotal roles in drug discovery. Click chemistry has emerged as a powerful strategy for constructing highly modular chemical libraries. However, the development of new click reactions and unlocking new click able building blocks remain exceedingly challenging. Here in , we describe a double-click strategy that enables the sequential ligation of widely available carboxylic acids and amines with fluorosulfuryl isocyanate (FSO 2 NCO) via a modular amidation/SuFEx process. This method provides facile access to chemical libraries of N-fluorosulfonyl amides (RCONHSO 2 F) and N-acylsulfamides (RCONHSO 2 NR ´ R ´´ ) in near-quantitative yields under simple and practical conditions. The robustness and efficiency of this double click strategy is showcased by the facile construction of chemical libraries in 96-well microtiter plates from a large number of carboxylic acids and amines. Preliminary biological activity screening reveals that some compound s  exhibit high antimicrobial activities against Gram-positive bacterium  S. aureus and drug-resistant MRSA (MIC up to 6.25·µg mL-1). These results provide compelling evidence for the potential application of modular click chemistry library as an enabling technology in high-throughput medicinal chemistry.

Innovative Approach to Chiral Polyurethanes: Asymmetric Copolymerization with Isocyanates.

The introduction of nitrogen-containing functional groups to chiral polymer backbones enables the tailoring of physical properties and offers opportunities for further post-polymerization modification. However, the substrate scope of such polymers is extremely limited because monomers having nitrogen-containing groups can change coordination state with respect to the metal centers, thus decreasing the activity and enantioselectivity and even poisoning the catalyst completely. In this paper, we report our attempts to carry out the asymmetric copolymerization of meso-epoxide with highly reactive isocyanates. In particular, we found that biphenol-linked bimetallic Co(III) complexes with multiple chiral centers are very efficient in catalyzing this asymmetric copolymerization reaction, affording optically active polyurethanes with a completely alternating nature and a high enantioselectivity of up to 94 % ee. Crucially, we identified that the steric hindrance at the phenolate ortho position of the ligand strongly influences the catalytic activity and product enantioselectivity. In addition, density functional theory calculations revealed that the highly sterically bulky substituents change the mechanism from bimetallic to monometallic, and result in the unexpected inversion of the chiral induction direction. Moreover, the high stereoregularity of the produced polyurethanes enhances their thermal stability, and they can be selectively decomposed into oxazolidinones. This study offers a versatile methodology for the synthesis of chiral polymers containing nitrogen functionalities.

Reaction mechanisms for methyl isocyanate (CH3NCO) gas-phase degradation.

Methyl isocyanate (MIC) is a toxic chemical found in many commercial, industrial, and agricultural processes, and was the primary chemical involved in the Bhopal, India disaster of 1984. The atmospheric environmental chemical reactivity of MIC is relatively unknown with only proposed reaction channels, mainly involving OH-initiated reactions. The gas-phase degradation reaction pathways of MIC and its primary product, formyl isocyanate (FIC), were investigated with quantum mechanical (QM) calculations to assess the fate of the toxic chemical and its primary transformation products. Transition state energy barriers and reaction energetics were evaluated for thermolysis/pyrolysis-like reactions and bimolecular reactions initiated by relevant radicals (•OH and Cl•) to evaluate the potential energy surfaces and identify the primary reaction pathways and products. Thermolysis/pyrolysis of MIC requires high energy to initiate N-CH3 and C-H bond dissociation and is unlikely to dissociate except under extreme conditions. Bimolecular radical addition and H-abstraction reaction pathways are deemed the most kinetically and thermodynamically favorable mechanisms. The primary transformation products of MIC were identified as FIC, methylcarbamic acid, isocyanic acid (isocyanate radical), and carbon dioxide. The results of this work inform the gas-phase reaction channels of MIC and FIC reactivity and identify transformation products under various reaction conditions.

Synthesis, Structure and Properties of Polyester Polyureas via a Non-Isocyanate Route with Good Combined Properties.

Polyureas have been widely applied in many fields, such as coatings, fibers, foams and dielectric materials. Traditionally, polyureas are prepared from isocyanates, which are highly toxic and harmful to humans and the environment. Synthesis of polyureas via non-isocyanate routes is green, environmentally friendly and sustainable. However, the application of non-isocyanate polyureas is quite restrained due to their brittleness as the result of the lack of a soft segment in their molecular blocks. To address this issue, we have prepared polyester polyureas via an isocyanate-free route and introduced polyester-based soft segments to improve their toughness and endow high impact resistance to the polyureas. In this paper, the soft segments of polyureas were synthesized by the esterification and polycondensation of dodecanedioic acid and 1,4-butanediol. Hard segments of polyureas were synthesized by melt polycondensation of urea and 1,10-diaminodecane without a catalyst or high pressure. A series of polyester polyureas were synthesized by the polycondensation of the soft and hard segments. These synthesized polyester-type polyureas exhibit excellent mechanical and thermal properties. Therefore, they have high potential to substitute traditional polyureas.

Non-Isocyanate Synthesis of Aliphatic Polyurethane by BiCl3-Catalyzed Transurethanization Polycondensation.

Non-isocyanate polyurethane synthesis by non-Sn catalysis is an essential challenge toward green polyurethane synthesis. Bismuth compounds are attractive candidates due to their low cost, low toxicity, and availability to urethane chemistry. This work applied various Bi catalysts to the self-polycondensation of a bishydroxyurethane monomer and found BiCl3 to be an excellent catalyst through optimization. The catalytic activity and price of BiCl3 are comparable to those of Bu2SnO, while its toxicity is significantly low. BiCl3 is, therefore, a promising alternative to Sn-based catalysts in non-isocyanate polyurethane synthesis.

Preparation of Non-Isocyanate Polyurethanes from Mixed Cyclic-Carbonated Compounds: Soybean Oil and CO2-Based Poly(ether carbonate).

This study presents the synthesis and characterization of non-isocyanate polyurethanes (NIPU) derived from the copolymerization of cyclic-carbonated soybean oil (CSBO) and cyclic carbonate (CC)-terminated poly(ether carbonate) (RCC). Using a double-metal cyanide catalyst, poly(ether carbonate) polyol was first synthesized through the copolymerization of carbon dioxide and propylene oxide. The terminal hydroxyl group was then subjected to a substitution reaction with a five-membered CC group using glycerol-1,2-carbonate and oxalyl chloride, yielding RCC. Attempts to prepare NIPU solely using RCC and diamine were unsuccessful, possibly due to the low CC functionality and the aminolysis of RCC's linear carbonate repeating units. However, when combined with CSBO, solid NIPUs were successfully obtained, exhibiting good thermal stability along with enhanced mechanical properties compared to conventional CSBO-based NIPU formulations. Overall, this study underscores the potential of leveraging renewable resources and carbon capture technologies to develop sustainable NIPUs with tailored properties, thereby expanding their range of applications.

Direct additive-free N-formylation and N-acylation of anilines and synthesis of urea derivatives using green, efficient, and reusable deep eutectic solvent ([ChCl][ZnCl2]2).

In the current report, we introduce a simple, mild efficient and green protocol for N-formylation and N-acetylation of anilines using formamide, formic acid, and acetic acid as inexpensive, nontoxic, and easily available starting materials just with heating along stirring in [ChCl][ZnCl2]2 as a durable, reusable deep eutectic solvent (DES), which acts as a dual catalyst and solvent system to produce a wide range of formanilides and acetanilides. Also, a variety of unsymmetrical urea derivatives were synthesized by the reaction of phenyl isocyanate with a range of amine compounds using this benign DES in high to excellent yields. [ChCl][ZnCl2]2 showed good recycling and reusability up to four runs without considerable loss of its catalytic activity.

Chemistry of Polythiols and Their Industrial Applications.

Thiols can react with readily available organic substrates under benign conditions, making them suitable for use in chemical, biological, physical, and materials and engineering research areas. In particular, the highly efficient thiol-based click reaction includes the reaction of radicals with electron-rich enes, Michael addition with electron-poor enes, carbonyl addition with isocyanate SN2 ring opening with epoxies, and SN2 nucleophilic substitution with halogens. This mini review provides insights into emerging venues for their industrial applications, especially for the applications of thiol-ene, thiol-isocyanate, and thiol-epoxy reactions, highlighting a brief chemistry of thiols as well as various approaches to polythiol synthesis.

Synthesis and crystal structure of [1,3-bis-(2,6-diiso-propyl-phen-yl)imidazol-2-yl-idene](iso-cyanato-κN)gold(I).

The title complex, [Au(NCO)(C27H36N2)], was synthesized by ligand metathesis from [1,3-bis-(2,6-diiso-propyl-phen-yl)imidazol-2-yl-idene]gold(I) chloride and sodium cyanate in anhydrous tetra-hydro-furan and crystallized from toluene at 233 K in the ortho-rhom-bic space group P212121, as a neutral complex with the central Au atom di-coordinated by an N-heterocyclic carbene [Au-C = 1.963 (2) Å] and an iso-cyanate [Au-N 1.999 (2) Å] ligands, with a linear CAuNCO moiety. The crystal packing is consolidated by C-H⋯O hydrogen bonds.

UV Laser-Induced Photodecomposition of Matrix-Isolated Salicylhydroxamic Acid: Identification of New Isocyanate Complexes.

Photochemical reactions of salicylhydroxamic acid were induced using tunable UV laser radiation followed by FTIR spectroscopy. Four pairs of co-products were experimentally found to appear in the photolysis: C6H4(OH)NCO⋯H2O (1), C6H4(OH)C(O)N⋯H2O (2), C6H4(OH)2⋯HNCO (3), and C6H4(OH)NHOH⋯CO (4). The comparison of the theoretical spectra with the experimental ones allowed us to determine the structures of the complexes formed in the matrices. The mechanisms of the reaction channels leading to the formation of the photoproducts were proposed. It was concluded that the first step in the formation of the complexes (1), (2), and (3) was the scission of the N-O bond, whereas the creation of complex (4) was due to cleavage of the C-N bond.

Reversible Coupling of Germylone with Isocyanates.

The germylone dimNHCGe (5, dimNHC=diimino N-heterocyclic carbene) undergoes a [2+2] cycloaddition with isocyanates RNCO (R=4-tolyl or 3,5-xylyl) to furnish novel alkyl carboxamido germylenes 7 (R=4-tolyl) and 8 (R=3,5-xylyl), featuring a C-C bond between the former carbene carbon and the isocyanate moiety. Heating a mixture of 8 with 4-tolyl isocyanate to 100 °C results in isocyanate metathesis, demonstrating reversible C-C bond formation on the reduced germanium compound. DFT calculations suggest that this process occurs via the reductive dissociation of isocyanate from 8 that regenerates the parent Ge(0) compound 5.