Type-specific inflammatory responses of vascular cells activated by interaction with virgin and aged microplastics.

Microplastics (MPs) are recognized as a major environmental problem due to their ubiquitous presence in ecosystems and bioaccumulation in food chains. Not only humans are continuously exposed to these pollutants through ingestion and inhalation, but recent findings suggest they may trigger vascular inflammation and potentially worsen the clinical conditions of cardiovascular patients. Here we combine headspace analysis by needle trap microextraction-gas chromatography-mass spectrometry (HS-NTME-GC-MS) and biological assays to evaluate the effects of polystyrene, high- and low-density polyethylene MPs on phenotype, metabolic activity, and pro-inflammatory status of Vascular Smooth Muscle Cells (VSMCs) the most prominent cells in vascular walls. Virgin and artificially aged MPs (4 weeks at 40 °C and 750 W/m2 simulated solar irradiation) were comparatively tested at 1 mg/mL to simulate a realistic exposure scenario. Our results clearly show the activation of oxidative stress and inflammatory processes when VSMCs were cultured with aged polymers, with significant overexpression of IL-6 and TNF-α. In addition, volatile organic compounds (VOCs), including pentane, acrolein, propanal, and hexanal as the main components, were released by VSMCs into the headspace. Type-specific VOC response profiles were induced on vascular cells from different MPs.

Advances in plastic mycoremediation: Focus on the isoenzymes of the lignin degradation complex.

This study investigates P. ostreatus and A. bisporus biodegradation capacity of low density polyethylene (LDPE) oxidised to simulate environmental weathering. Fourier transform infrared (FT-IR) spectroscopy and scanning electron microscopy (SEM) were used to analyse the degradation of LDPE treated with fungal cultures. Molecular implications of LDPE degradation by P. ostreatus and A. bisporus were evaluated by Reverse transcription followed by quantitative PCR (qRT-PCR) of lac, mnp and lip genes expression. After 90 days of incubation, FT-IR analysis showed, for both fungal treatments, an increasing in the intensity of peaks related to the asymmetric C-C-O stretching (1160 to 1000 cm-1) and the -OH stretching (3700 to 3200 cm-1) due to the formation of alcohols and carboxylic acid, indicating depolymerisation of LDPE. This was confirmed by the SEM analysis, where a widespread alteration of the surface morphology was observed for treated LDPE fragments. Results revealed that the exposure of P. ostreatus to oxidised LDPE treatment led to a significant increase in the expression of the lac6, lac7, lac9, lac10 and mnp2 genes, while A. bisporus showed an over-expression in lac2 and lac12 genes. The obtained results offer new perspectives for a biotechnological use of P. ostreatus and A. bisporus for plastic bioremediation.

Metagenome-derived SusD-homologs affiliated with Bacteroidota bind to synthetic polymers.

Starch utilization system (Sus)D-homologs are well known for their carbohydrate-binding capabilities and are part of the sus operon in microorganisms affiliated with the phylum Bacteroidota. Until now, SusD-like proteins have been characterized regarding their affinity toward natural polymers. In this study, three metagenomic SusD homologs (designated SusD1, SusD38489, and SusD70111) were identified and tested with respect to binding to natural and non-natural polymers. SusD1 and SusD38489 are cellulose-binding modules, while SusD70111 preferentially binds chitin. Employing translational fusion proteins with superfolder GFP (sfGFP), pull-down assays, and surface plasmon resonance (SPR) has provided evidence for binding to polyethylene terephthalate (PET) and other synthetic polymers. Structural analysis suggested that a Trp triad might be involved in protein adsorption. Mutation of these residues to Ala resulted in an impaired adsorption to microcrystalline cellulose (MC), but not so to PET and other synthetic polymers. We believe that the characterized SusDs, alongside the methods and considerations presented in this work, will aid further research regarding bioremediation of plastics. IMPORTANCE: SusD1 and SusD38489 can be considered for further applications regarding their putative adsorption toward fossil-fuel based polymers. This is the first time that SusD homologs from the polysaccharide utilization loci (PUL), largely described for the phylum Bacteroidota, are characterized as synthetic polymer-binding proteins.

FTIR-Plastics: A Fourier Transform Infrared Spectroscopy dataset for the six most prevalent industrial plastic polymers.

This work introduces two datasets: FTIR-Plastics-C4 (Fourier Transform Infrared Spectroscopy, in plastics, at a wavenumber spectral resolution of 4 cm⁻¹) and FTIR-Plastics-C8 (Fourier Transform Infrared Spectroscopy, in plastics, at a wavenumber spectral resolution of 8 cm⁻¹), each comprising 3,000 spectra corresponding to the most used synthetic polymers worldwide. The main contribution of this work lies in the selection and FTIR characterization of the six polymers commonly used in everyday life and industry, namely Polyethylene Terephthalate (PET), High-Density Polyethylene (HDPE), Polyvinyl Chloride (PVC), Low-Density Polyethylene (LDPE), Polypropylene (PP), and Polystyrene (PS). FTIR-Plastics-C4 consists of 3,000 spectra obtained with a configuration of 32 scans and a resolution of 4 cm⁻¹, covering a range from 4000 to 400 cm⁻¹. The FTIR-Plastics-C8 dataset also contains 3,000 spectra obtained with 32 scans and a resolution of 8 cm⁻¹ within the same range. A cleaning stage was applied to the FTIR-Plastics datasets, removing the header containing 19 lines and a footer with 34 lines from the original file. Additionally, a standardization process assigns 15 lines in the files to highlight information regarding the equipment used (based on the information provided by a Jasco spectrophotometer, model FT/IR-6700 PRO 4x, used for polymer characterization). The final dataset is in tabular .csv file format. The dataset is available on an open repository, and its application was designed to identify microplastics extracted from the environment and enable comparisons between commercial polymers.

Reproduction, growth and oxidative stress in earthworm Eisenia andrei exposed to conventional and biodegradable mulching film microplastics.

Plastic contamination in agricultural soils has become increasingly evident. Plastic mulching films are widely used in agricultural practices. However, the increased use of biodegradable plastics has, to some extent, replaced their non-degradable counterparts. The fragmentation of plastics generates microplastics (MPs), posing risk to soil functions and organisms. In this study the effects of low-density polyethylene microplastics (PE-MP) and polybutylene adipate terephthalate biodegradable microplastics (PBAT-BD-MP) originating from mulching films on the earthworm Eisenia andrei were studied. The earthworms were exposed to seven concentrations (0, 0.005, 0.05, 0.1, 0.5, 1, and 5 % w/w) based on environmentally relevant levels and worst-case scenarios on soil contamination. Survival, growth, reproduction, and biomarkers for oxidative stress [superoxide dismutase (SOD), catalase (CAT), glutathione reductase (GR), glutathione S-transferase (GST), glutathione (GSH), and lipid peroxidation (LPO)] were analysed. Additionally, the Integrated Biomarker Response Index (IBR) was calculated to assess the overall oxidative stress status of the earthworms. Results showed that PE-MP exposure slightly decreased the biomass of the earthworms towards higher concentrations, whereas PBAT-BD-MPs induced growth at lower concentrations. MPs did not have a significant effect on Eisenia andrei reproduction; however, a slight negative trend was observed in juvenile production with increasing PE-MP concentrations. Both PE-MP and PBAT-BD-MP affected antioxidant system, PE-MPs with changes in CAT and GR levels and PBAT-BD-MPs inducing effects on SOD and LPO levels. Additionally, both MPs exhibited effects on soil parameters, resulting in increased soil pH and water-holding capacity at 5 % concentration. Changes in soil parameters can further affect soil organisms such as earthworms. This study provides understanding of the ecotoxicological effects of conventional and biodegradable microplastics on the earthworm Eisenia andrei. It also shows that MP particles of both conventional and biodegradable mulching films induce oxidative stress, considered as an early-warning indicator for adverse ecological effects, in environmentally relevant concentrations.

Antimicrobial Packaging for Plum Tomatoes Based on ZnO Modified Low-Density Polyethylene.

Food safety and quality are major concerns in the food industry. Despite numerous studies, polyethylene remains one of the most used materials for packaging due to industry reluctance to invest in new technologies and equipment. Therefore, modifications to the current materials are easier to implement than adopting whole new solutions. Antibacterial activity can be induced in low-density polyethylene films only by adding antimicrobial agents. ZnO nanoparticles are well known for their strong antimicrobial activity, coupled with low toxicity and UV shielding capability. These characteristics recommend ZnO for the food industry. By incorporating such safe and dependable antimicrobial agents in the polyethylene matrix, we have obtained composite films able to inhibit microorganisms' growth that can be used as packaging materials. Here we report the obtaining of highly homogenous composite films with up to 5% ZnO by a melt mixing process at 150 °C for 10 min. The composite films present good transparency in the visible domain, permitting consumers to visualize the food, but have good UV barrier properties. The composite films exhibit good antimicrobial and antibiofilm activity from the lowest ZnO composition (1%), against both Gram-positive and Gram-negative bacterial strains. The homogenous dispersion of ZnO nanoparticles into the polyethylene matrix was assessed by Fourier transform infrared microscopy and scanning electron microscopy. The optimal mechanical barrier properties were obtained for composition with 3% ZnO. The thermal analysis indicates that the addition of ZnO nanoparticles has increased thermal stability by more than 100 °C. The UV-Vis spectra indicate a low transmittance in the UV domain, lower than 5%, making the films suitable for blocking photo-oxidation processes. The obtained films proved to be efficient packaging films, successfully preserving plum (Rome) tomatoes for up to 14 days.

Effects of microplastics and cadmium co-contamination on soil properties, maize (Zea mays L.) growth characteristics, and cadmium accumulation in maize in loessial soil-maize systems.

Microplastics (MPs) are pervasive pollutants found in agricultural soils, yet research on the combined impacts of MPs and heavy metals on soil-plant systems remains limited. This study investigates the combined impact of low-density polyethylene (LDPE) microplastics (L: 1 mm, S: 100 µm, 0.1%, 1%) and Cd on soil properties, available Cd content, maize growth, and Cd accumulation by mazie through pot experiments. The findings unveiled notable impacts of the treatment groups, namely MP-L0.1%, MP-S0.1%, MP-L1%, and MP-S1%, on soil organic carbon (SOC), maize height, and catalase (CAT) activity (P < 0.05). The dosage of MPs significantly influenced maize height, MP-S0.1% treatment resulted in a 5.6% reduction, while the other groups had insignificant effects. Particle size and dosage significantly affected SOC and CAT (P < 0.01). The MP-L1% and MP-S1% groups resulted in increases of SOC by 121.5% and 281.0%, respectively. CAT reductions were 32.6%, 62.8%, 41.9%, and 34.9% in MP-L0.1%, MP-S0.1%, MP-L1%, and MP-S1% groups, individually. The Cd treatment induced a significant decrease in soil cation exchange capacity (CEC), maize stem diameter, and root length, accompanied by significant increases in maize plant height, malondialdehyde (MDA), CAT, and superoxide dismutase (SOD) activities. Combined LDPE and Cd contamination had significant effects on maize height and Cd content in leaves. Specifically, MP-L0.1%+Cd, MP-S0.1%+Cd, MP-L1%+Cd, and MP-S1%+Cd reduced maize height by 4.1%, 4.5%, 8.7%, and 13.8%, respectively. The co-presence of LDPE and Cd increased available Cd content in soil while elevating Cd concentration in maize shoots and roots, with a notable 25.5% increase in Cd concentration in maize leaves in the MP-L1%+Cd group compared to the Cd group. Furthermore, LDPE effects on soil-plant systems varied depending on particle size and dosage. This research provides important perspectives on evaluating the concurrent contamination and potential dangers of MPs and toxic metals in soil-plant environments.

[Effect of Low-density Polyethylene Microplastics on Natural Attenuation of Oxygenated Polycyclic Aromatic Hydrocarbons in Soil].

The continuous accumulation of microplastics in agricultural soils may affect the natural attenuation of oxygen-containing polycyclic aromatic hydrocarbons (OPAHs). The effects of low-density polyethylene (LDPE) microplastics with the spiking proportion of 1 % and 0.01 % in soils on the natural attenuation of OPAHs were investigated via soil microcosm experiments. The relation between the response of bacterial communities and OPAHs dissipation was also explored. The initial content of OPAHs in the soil was 34.6 mg·kg-1. The dissipation of OPAHs in the soil on day 14 was inhibited by LDPE. The contents of OPAHs in LDPE groups were higher than that in the control by 0.9-1.6 mg·kg-1, and the inhibition degree increased with the proportion of LDPE. The contents of OPAHs were not significantly different among groups on day 28, indicating that the inhibitory effect of LDPE disappeared. LDPE did not change the composition of the dominant taxa in the OPAHs-contaminated soil community but influenced the relative abundances of some dominant taxa. LDPE increased the relative abundance of Proteobacteria and Actinobacteria at the phylum level and decreased that of Bacillus and increased those of Micromonospora, Sphingomonas, and Nitrospira (potential degrading bacteria of LDPE and endogenous substances) at the genus level, all four of which were the main genera dominating intergroup community differences. LDPE changed the α and ß diversity of bacterial communities, but the extents were not significant. LDPE affected the function of the bacterial community, reducing the total abundance of PAHs-degrading genes and some degrading enzymes, inhibiting the growth of PAHs-degrading bacteria and thus interfering with the natural decay of OPAHs.

The comparative toxicity of biobased, modified biobased, biodegradable, and petrochemical-based microplastics on the brackish water flea Diaphanosoma celebensis.

The escalating production and improper disposal of petrochemical-based plastics have led to a global pollution issue with microplastics (MPs), which pose a significant ecological threat. Biobased and biodegradable plastics are believed to mitigate plastic pollution. However, their environmental fate and toxicity remain poorly understood. This study compares the in vivo effects of different types of MPs, poly(butylene adipate-co-terephthalate) as a biodegradable plastic, polylactic acid (PLA) as a biobased plastic, ß-cyclodextrin-grafted PLA as a modified biobased plastic, and low density polyethylene as the reference petrochemical-based plastic, on the key aquatic primary consumer Diaphanosoma celebensis. Exposure to MPs resulted in significant reproductive decline, with comparable effects observed irrespective of MP type or concentration. Exposure to MPs induced distinct responses in redox stress, with transcriptional profiling revealing differential gene expression patterns that indicate varied cellular responses to different types of MPs. ATP-binding cassette transporter activity assays demonstrated altered efflux activity, mainly in response to modified biobased and biodegradable MPs. Overall, this study highlights the comparable in vivo and in vitro effects of biobased, biodegradable, and petrochemical-based MPs on aquatic primary consumers, highlighting their potential ecological implications.

Insights into Plastic Degradation Processes in Marine Environment by X-ray Photoelectron Spectroscopy Study.

The present study employs X-ray photoelectron spectroscopy (XPS) to analyze plastic samples subjected to degradation processes with the aim to gain insight on the relevant chemical processes and disclose fragmentation mechanisms. Two model plastics, namely polystyrene (PS) and polyethylene (PE), are selected and analyzed before and after artificial UV radiation-triggered weathering, under simulated environmental hydrodynamic conditions, in fresh and marine water for different time intervals. The object of the study is to identify and quantify chemical groups possibly evidencing the occurrence of hydrolysis and oxidation reactions, which are the basis of degradation processes in the environment, determining macroplastic fragmentation. Artificially weathered plastic samples are analyzed also by Raman and FT-IR spectroscopy. Changes in surface chemistry with weathering are revealed by XPS, involving the increase in chemical moieties (hydroxyl, carbonyl, and carboxyl functionalities) which can be correlated with the degradation processes responsible for macroplastic fragmentation. On the other hand, the absence of significant modifications upon plastics weathering evidenced by Raman and FT-IR spectroscopy confirms the importance of investigating plastics surface, which represents the very first part of the materials exposed to degradation agents, thus revealing the power of XPS studies for this purpose. The XPS data on experimentally weathered particles are compared with ones obtained on microplastics collected from real marine environment for investigating the occurring degradation processes.

Biodegradation of low-density polyethylene film by two bacteria isolated from plastic debris in coastal beach.

Low-density polyethylene (LDPE) conduces massive environmental accumulation due to its high production and recalcitrance to environment. In this study, We successfully enriched and isolated two strains, Nitratireductor sp. Z-1 and Gordonia sp. Z-2, from coastal plastic debris capable of degrading LDPE film. After a 30-day incubation at 30 ℃, strains Z-1 and Z-2 decreased the weight of branched-LDPE (BLDPE) film by 2.59 % and 10.27 % respectively. Furthermore, high temperature gel permeation chromatography (HT-GPC) analysis revealed molecular weight reductions of 7.69 % (Z-1) and 23.22 % (Z-2) in the BLDPE film. Scanning electron microscope (SEM) image showed the presence of microbial colonization and perforations on the film's surface. Fourier transform infrared spectroscopy (FTIR) analysis indicated novel functional groups, such as carbonyl and carbon-carbon double bonds in LDPE films. During LDPE degradation, both strains produced extracellular reactive oxygen species (ROS). GC-MS analysis revealed the degradation products included short-chain alkanes, alkanols, fatty acids, and esters. Genomic analysis identified numerous extracellular enzymes potentially involved in LDPE chain scission. A model was proposed suggesting a coordinated role between ROS and extracellular enzymes in the biodegradation of LDPE. This indicates strains Z-1 and Z-2 can degrade LDPE, providing a basis for deeper exploration of biodegradation mechanisms.

Identification of plastic-degrading bacteria in the human gut.

Environmental pollution caused by the excessive use of plastics has resulted in the inflow of microplastics into the human body. However, the effects of microplastics on the human gut microbiota still need to be better understood. To determine whether plastic-degrading bacteria exist in the human gut, we collected the feces of six human individuals, did enrichment cultures and screened for bacterial species with a low-density polyethylene (LDPE) or polypropylene (PP)-degrading activity using a micro-spray method. We successfully isolated four bacterial species with an LDPE-degrading activity and three with a PP-degrading activity. Notably, all bacterial species identified with an LDPE or PP-degrading activity were opportunistic pathogens. We analyzed the microbial degradation of the LDPE or PP surface using scanning electron microscopy and confirmed that each bacterial species caused the physical changes. Chemical structural changes were further investigated using X-ray photoelectron spectroscopy and Fourier-transform-infrared spectroscopy, confirming the oxidation of the LDPE or PP surface with the formation of carbonyl groups (C=O), ester groups (CO), and hydroxyl groups (-OH) by each bacterial species. Finally, high temperature gel permeation chromatography (HT-GPC) analysis showed that these bacterial species performed to a limited extent depolymerization. These results indicate that, as a single species, these opportunistic pathogens in the human gut have a complete set of enzymes and other components required to initiate the oxidation of the carbon chains of LDPE or PP and to degrade them. Furthermore, these findings suggest that these bacterial species can potentially biodegrade and metabolize microplastics in the human gut.

Biodegradation of low-density polyethylene film by Bacillus gaemokensis strain SSR01 isolated from the guts of earthworm.

In recent years, low-density polyethylene (LDPE) has emerged as an essential component of the routine tasks that people engage in on a daily basis. However, over use of it resulted in environmental buildup that contaminated aquatic habitats and human health. Biodegradation is the most effective way for controlling pollution caused by synthetic plastic waste in a sustainable manner. In the present study, the LDPE degrading bacterial strain was screened from gut of Earthworms collected from plastic waste dumped area Mettur dam, Salem district, Tamil Nadu, India. The LDPE degrading bacterial strain was screened and identified genotypically. The LDPE degrading Bacillus gaemokensis strain SSR01 was submitted in NCBI. The B. gaemokensis strain SSR01 bacterial isolate degraded LDPE film after 14 days of incubation and demonstrated maximum weight loss of up to 4.98%. The study of deteriorated film using attenuated total reflection-Fourier transform infrared revealed the presence of a degraded product. The degradation of LDPE film by B. gaemokensis strain SSR01 was characterized by field-emission scanning electron microscopy analysis for surface alterations. The energy dispersive X-ray spectroscopy test confirmed that the broken-down LDPE film had basic carbon reduction. The present study of LDPE flim biodegradation by B. gaemokensis strain SSR01 has acted as a suitable candidate and will help in decreasing plastic waste.

Novel Polymer Composites for Lead-Free Shielding Applications.

Polymer nanocomposites have recently been introduced as lead-free shielding materials for use in medical and industrial applications. In this work, novel shielding materials were developed using low-density polyethylene (LDPE) mixed with four different filler materials. These four materials are cement, cement with iron oxide, cement with aluminum oxide, and cement with bismuth oxide. Different weight percentages were used including 5%, 15%, and 50% of the cement filler with LDPE. Furthermore, different weight percentages of different combinations of the filler materials were used including 2.5%, 7.5%, and 25% (i.e., cement and iron oxide, cement and aluminum oxide, cement and bismuth oxide) with LDPE. Bismuth oxide was a nanocomposite, and the remaining oxides were micro-composites. Characterization included structural properties, physical features, mechanical and thermal properties, and radiation shielding efficiency for the prepared composites. The results show that a clear improvement in the shielding efficiency was observed when the filler materials were added to the LDPE. The best result out of all these composites was obtained for the composites of bismuth oxide (25 wt.%) cement (25 wt.%) and LDPE (50 wt.%) which have the lowest measured mean free path (MFP) compared with pure LDPE. The comparison shows that the average MFP obtained from the experiments for all the eight energies used in this work was six times lower than the one for pure LDPE, reaching up to twelve times lower for 60 keV energy. The best result among all developed composites was observed for the ones with bismuth oxide at the highest weight percent 25%, which can block up to 78% of an X-ray.

Mycodegradation of low-density polyethylene by Cladosporium sphaerospermum, isolated from platisphere.

Plastic accumulation is a severe threat to the environment due to its resistivity to thermal, mechanical and biological processes. In recent years, microbial degradation of plastic waste disposal is of interest because of its eco-friendly nature. In this study, a total of 33 fungi were isolated from the plastisphere and out of which 28 fungal species showed halo zone of clearance in agarized LDPE media. The fungus showing highest zone of clearance was further used to evaluate its degradation potential. Based on morphological and molecular technique, the fungus was identified as Cladosporium sphaerospermum. The biodegradation of LDPE by C. sphaerospermum was evaluated by various methods. The exposure of LDPE with C. sphaerospermum resulted in weight loss (15.23%) in seven days, higher reduction rate (0.0224/day) and lower half-life (30.93 days). FTIR analysis showed changes in functional group and increased carbonyl index in LDPE treated with C. sphaerospermum. SEMimages evidenced the formation of pits, surface aberrations and grooves on the LDPE film treated with the fungus whereas the untreated control LDPE film showed no change. AFM analysis confirmed the surface changes and roughness in fungus treated LDPE film. This might be due to the extracellular lignolytic enzymes secreted by C. sphaerospermum grown on LDPE. The degradation of polyethylene by Short chain alkanes such as dodecane, hexasiloxane and silane were identified in the extract of fungus incubated with LDPE film through GC-MS analysis which might be due to the degradation of LDPE film by C. sphaerospermum. This was the first report on the LDPE degradation by C. sphaerospermum in very short duration which enables green scavenging of plastic wastes.

Recycling and reusing potential of disposable low-density polyethylene plastic waste for flexible paver tile construction for outdoor application.

Plastic waste disposal has escalated into a serious global concern due to the non-biodegradable nature of plastics, which are composed of high-molecular-mass organic polymers along with other ingredients. Therefore, this study focuses on reusing and recycling LDPE plastic waste as a binding agent in paver tile production. This aligns with global sustainability goals by promoting resource efficiency and reducing waste generation. The investigation aims to address the environmental impact of plastic waste by finding sustainable solutions for its management. This includes exploring the feasibility and viability of using LDPE plastic waste in paver tile production as a means of recycling and reusing locally collected waste. The LDPE waste plastic collection, identification, milling, and melting at 170 °C. Subsequently, the sampled sand, sieved to a size of ≤0.75 mm, was blended with molten plastic in a specified proportion and then molded to create paving tiles using a hydraulic press machine. The researchers utilized response surface methodology (RSM) combined with Box-Benken designs (BBD) to optimize three key experimental parameters (plastic-to-sand ratio: 10 %, 25 %, 40 %; time: 2, 5, 8 min, pressure: 1, 3, 5 MPa) influencing mechanical properties of paver tiles, including water absorption (WA), flexural strength (FS), and compressive strength (CS). The result revealed that the optimal combination of 25 % waste plastic, 5 min, and 3 MPa of pressure resulted in a maximum flexural strength (FS) of 3.689 MPa and compressive strength (CS) of 4.141 MPa, with an average water absorption (WA) of 0.322 %. Therefore, the mechanical properties of the developed tiles met the desired standard. In conclusion, the mechanical qualities of the tiles were promising, indicating that reusing waste LDPE plastic to create paver tiles presents an appealing option for plastic waste disposal. The composite paver tiles exhibited promising attributes for outdoor applications, such as park pavement and outdoor public spaces, owing to their favorable mechanical properties and low water absorption.

Sustainable Asphalt Mixtures with Enhanced Water Resistance for Flood-Prone Regions Using Recycled LDPE and Carnauba-Soybean Oil Additive.

This manuscript presents a comprehensive study on the sustainable optimization of asphalt mixtures tailored for regions prone to flooding. The research addresses the challenges associated with water damage to asphalt pavements by incorporating innovative additives. The study centers on incorporating recycled Low-Density Polyethylene (LDPE) and a tailored Carnauba-Soybean Oil Additive, advancing asphalt mixtures with a Control mix, LDPE (5%) + Control, and LDPE (5%) + 3% Oil + Control. A critical aspect of the research involves subjecting these mixtures to 30 wetting and drying cycles, simulating the conditions prevalent in tropical flood-prone areas. The incorporation of innovative additives in asphalt mixtures has demonstrated significant improvements across various performance parameters. Tensile Strength Ratio (TSR) tests revealed enhanced tensile strength, with the LDPE (5%) + 3% Oil-modified mixture exhibiting an impressive TSR of 85.7%. Dynamic Modulus tests highlighted improved rutting resistance, showcasing a remarkable increase to 214 MPa in the LDPE (5%) with a 3% Oil-modified mixture. The Semi-Circular Bending (SCB) test demonstrated increased fracture resistance and energy absorption, particularly in the LDPE (5%) with 3% Oil-modified mixture. Hamburg Wheel-Tracking (HWT) tests indicated enhanced moisture resistance and superior rutting resistance at 20,000 cycles for the same mixture. Cantabro tests underscored improved aggregate shatter resistance, with the LDPE (5%) + 3% Oil-modified mixture exhibiting the lowest weight loss rate at 9.820%. Field tests provided real-world insights, with the LDPE (5%) + 3% Oil mixture displaying superior stability, a 61% reduction in deflection, and a 256% improvement in surface modulus over the control mixture. This research lays the groundwork for advancing the development of sustainable, high-performance road pavement materials, marking a significant stride towards resilient infrastructure in flood-prone areas.

Microplastics affect the ecological stoichiometry of plant, soil and microbes in a greenhouse vegetable system.

Microplastic (MP) pollution is a growing global issue due to its potential threat to ecosystem and human health. Low-density polyethylene (LDPE) MP is the most common type of plastics polluting agricultural soils, negatively affecting soil-microbial-plant systems. However, the effects of LDPE MPs on the carbon (C): nitrogen (N): phosphorus (P) of soil-microbial-plant systems have not been well elucidated. Thus, we conducted a pot experiment with varying LDPE MP concentrations (w/w) (control without MPs; 0.2 % MPs (PE1); 5 % MPs (PE2); and 10 % MPs (PE3)) to study their effects on soil-microbial-plant C-N-P stoichiometry. Soil C:N ratio increased 2.3 and 3.4 times in PE2 and PE3, respectively. Soil C:P ratio increased 2.2 and 3.6 times in PE2 and PE3, respectively. Soil microbial C:N ratios decreased by 46.2 % in PE1, while C:P ratios decreased by 59.2, 38.6, and 67.9 % in PE1, PE2, and PE3, respectively. Soil microbial N:P ratio decreased in PE1 (17.2) and PE3 (59.1 %). MPs increased shoot C content and C:N ratios, particularly at the 5 % MP addition rate. MP addition altered dissolved organic C, N, and P concentrations, depending on the MP addition rate. Microbial community responses to MP exposure were complex, leading to variable effects on different microbial groups at different MP addition rates. Structural equation modeling showed that MP addition had a direct positive effect (ß = 0.96) on soil C-N-P stoichiometry and a direct negative effect (ß = -1.34) on microbial C-N-P stoichiometry. These findings demonstrate the complex interactions between MPs, soil microorganisms, and nutrient dynamics, highlighting the need for further research to better understand the ecological implications of MP pollution in terrestrial ecosystems.

Low-Density Polyethylene-Based Novel Active Packaging Film for Food Shelf-Life Extension via Thyme-Oil Control Release from SBA-15 Nanocarrier.

The use of natural raw substances for food preservation could provide a great contribution to food waste reduction, circular economy enhancement, and green process application widening. Recent studies indicated that the use of porous materials as adsorbents for natural essential oils provided nanohybrids with excellent antioxidant and antimicrobial properties. Following this trend in this work, a thymol oil (TEO) rich SBA-15 nanohybrid was prepared and characterized physiochemically with various techniques. This TEO@SBA-15 nanohybrid, along with the pure SBA-15, was extruded with low-density polyethylene (LDPE) to develop novel active packaging films. Results indicated that TEO loading was higher than other porous materials reported recently, and the addition of both pure SBA-15 and TEO@SBA-15 to the LDPE increased the water/oxygen barrier. The film with the higher thyme-oil@SBA-15 nanohybrid content exhibited a slower release kinetic. The antioxidant activity of the final films ignited after 48 h, was in the range of 60-70%, and was almost constant for 7 days. Finally, all tests indicated a sufficient improvement by the addition of thyme-oil@SBA-15 nanohybrids in the pure LDPE matrix and the concentration of wt. 10% of such nanocarriers provided the optimum final LDPE/10TEO@SBE-15 active packaging film. This material could be a potential future product for active packaging applications.

Impact of gamma irradiation on physico-chemical and electromagnetic interference shielding properties of Cu2O nanoparticles reinforced LDPE nanocomposite films.

In the current work, cuprous oxide (Cu2O) nanoparticles coated with Tween 80 were successfully synthesized via the chemical reduction method. Nanocomposites composed of low-density polyethylene (LDPE) and different ratios of Cu2O nanoparticles were fabricated by the melt mixing process. 10% of ethyl vinyl acetate (EVA) as a compatibilizing agent was added to the molten LDPE matrix and the mixing process continued until homogenous nanocomposites were fabricated. To study the influence of ionizing radiation on the fabricated samples, the prepared species were exposed to 50 and 100 kGy of gamma rays. The synthesized Cu2O nanoparticles were investigated by transmission electron microscopy (TEM) and X-ray diffraction (XRD). XRD and TEM analysis illustrated the successful formation of spherical Cu2O nanoparticles with an average size of 16.8 nm. The as-prepared LDPE/Cu2O nanocomposites were characterized via different techniques such as mechanical, thermal, morphological, XRD, and FTIR. Electromagnetic interference shielding (EMI) of the different nanocomposite formulations was performed as a promising application for these materials in practical life. The electromagnetic shielding effectiveness (SE) of the produced samples was measured in the X-band of the radio frequency range from 8 to 12 GHz using the vector network analyzer (VNA) and a proper waveguide. All the samples were studied before and after gamma-ray irradiation under the same conditions of pressure and temperature. The shielding effectiveness increased significantly from 25 dB for unirradiated samples to 35 dB with samples irradiated with 100 kGy, which reflects 40% enhancement in the effectiveness of the shielding.