RESUMO
In the development of lithium-ion batteries (LIBs), cheaper and safer solid polymer electrolytes are expected to replace combustible organic liquid electrolytes to meet the larger market demand. However, low ionic conductivity and inadequate cycling stability impede their commercial viability. Herein, a novel flexible conducting solid polymer electrolytes (CSPEs) based on polyvinyl alcohol (PVA) and ion-polarized diethylenetriaminepentaacetic acid (P-DETP) is developed for the first time and applied in LIBs. PVA and P-DETP form a compact polymer network through hydrogen bonding, enhancing the thermomechanical stability of CSPE while restricting the migration of larger anions. Furthermore, density functional theory calculations confirm that P-DETP can facilitate the dissociation of Li+-TFSI- via electrostatic attraction, resulting in increased mobility of lithium ions. Additionally, P-DETP contributes to the formation of a stable electrode-electrolyte interface layer, effectively suppressing the growth of lithium dendrites and improving antioxidant capacity. These synergistic effects enable CSPE to exhibit remarkable properties including high ionic conductivity (2.8 × 10-4 S cm-1), elevated electrochemical potential (5.1 V), and excellent lithium transference number (0.869). Notably, the P-DETP/LiTFSI CSPE demonstrates stable performance not only in LiFePO4 batteries but also adapts to high-nickel ternary LiNi0.88Co0.06Mn0.06O2 cathode, highlighting its immense potential for application in high energy density LIBs.
RESUMO
Electrolyte solvation chemistry regulated by lithium salts, solvents, and additives has garnered significant attention since it is the most effective strategy for designing high-performance electrolytes in lithium-ion batteries (LIBs). However, achieving a delicate balance is a persistent challenge, given that excessively strong or weak Li+-solvent coordination markedly undermines electrolyte properties, including thermodynamic redox stability and Li+-desolvation kinetics, limiting the practical applications. Herein, we elucidate the crucial influence of solvent-solvent interactions in modulating the Li+-solvation structure to enhance electrolyte thermodynamic and kinetic properties. As a paradigm, by combining strongly coordinated propylene carbonate (PC) with weakly coordinated cyclopentylmethyl ether (CPME), we identified intermolecular interactions between PC and CPME using 1H-1H correlation spectroscopy. Experimental and computational findings underscore the crucial role of solvent-solvent interactions in regulating Li+-solvent/anion interactions, which can enhance both the thermodynamic (i.e., antireduction capability) and kinetic (i.e., Li+-desolvation process) aspects of electrolytes. Additionally, we introduced an interfacial model to reveal the intricate relationship between solvent-solvent interactions, electrolyte properties, and electrode interfacial behaviors at a molecular scale. This study provides valuable insights into the critical impact of solvent-solvent interactions on electrolyte properties, which are pivotal for guiding future efforts in functionalized electrolyte engineering for metal-ion batteries.
RESUMO
Silicon monoxide (SiO) has attracted considerable interest as anode material for lithium-ion batteries (LIBs). However, their poor initial Coulombic efficiency (ICE) and conductivity limit large-scale applications. Prelithiation and carbon-coating are common and effective strategies in industry for enhancing the electrochemical performance of SiO. However, the involved heat-treatment processes inevitably lead to coarsening of active silicon phases, posing a significant challenge in industrial applications. Herein, the differences in microstructures and electrochemical performances between prelithiated SiO with a pre-coated carbon layer (SiO@C@PLi) and SiO subjected to carbon-coating after prelithiation (SiO@PLi@C) are investigated. A preliminary carbon layer on the surface of SiO before prelithiation is found that can suppress active Si phase coarsening effectively and regulate the post-prelithiation phase content. The strategic optimization of the sequence where prelithiation and carbon-coating processes of SiO exert a critical influence on its regulation of microstructure and electrochemical performances. As a result, SiO@C@PLi exhibits a higher ICE of 88.0%, better cycling performance and lower electrode expansion than SiO@PLi@C. The pouch-type full-cell tests demonstrate that SiO@C@PLi/Graphite||NCM811 delivers a superior capacity retention of 91% after 500 cycles. This work provides invaluable insights into industrial productions of SiO anodes through optimizing the microstructure of SiO in prelithiation and carbon-coating processes.
RESUMO
Silicon (Si) is one of the most promising anode materials for high-energy-density lithium-ion batteries. However, the huge volume expansion hinders its commercial application. Embedding amorphous Si nanoparticles in a porous carbon framework is an effective way to alleviate Si volume expansion, with the pore volume of the carbon substrates playing a pivotal role. This work demonstrates the impact of pore volume on the electrochemical performance of the silicon/carbon porous composites from two perspectives: 1) pore volume affects the loadings of Si particles; 2) pore volume affects the structural stability and mechanical properties. The smaller pore volume of the carbon substrate cannot support the high Si loadings, which results in forming a thick Si shell on the surface, thereby being detrimental to cycling stability and the diffusion of electrons and ions. On top of that, the carbon substrate with a larger pore volume has poor structural stability due to its fragility, which is also not conducive to realizing long cycle life and high rate performance. Achieving excellent electrochemical performances should match the proper pore volume with Si content. This study will provide important insights into the rational design of the silicon/carbon porous composites based on the pore volume of the carbon substrates.
RESUMO
To effectively solve the challenges of rapid capacity decay and electrode crushing of silicon-carbon (Si-C) anodes, it is crucial to carefully optimize the structure of Si-C active materials and enhance their electron/ion transport dynamic in the electrode. Herein, a unique hybrid structure microsphere of Si/C/CNTs/Cu with surface wrinkles is prepared through a simple ultrasonic atomization pyrolysis and calcination method. Low-cost nanoscale Si waste is embedded into the pyrolysis carbon matrix, cleverly combined with the flexible electrical conductivity carbon nanotubes (CNTs) and copper (Cu) particles, enhancing both the crack resistance and transport kinetics of the entire electrode material. Remarkably, as a lithium-ion battery anode, the fabricated Si/C/CNTs/Cu electrode exhibits stable cycling for up to 2300 cycles even at a current of 2.0 A g-1, retaining a capacity of ≈700 mAh g-1, with a retention rate of 100% compared to the cycling started at a current of 2.0 A g-1. Additionally, when paired with an NCM523 cathode, the full cell exhibits a capacity of 135 mAh g-1 after 100 cycles at 1.0 C. Therefore, this synthesis strategy provides insights into the design of long-life, practical anode electrode materials with micro/nano-spherical hybrid structures.
RESUMO
Doping and carbon encapsulation modifications have been proven to be effective methods for enhancing the lithium storage performance of batteries. The hydrothermal method and ball milling are commonly used methods for material synthesis. In this study, a composite anode material rich in carbon nanotubes (CNTs) conductive tubular network connection and encapsulation of SnO2-MoS2@CNTs (SMC) was synthesized by combining these two methods. In this highly conductive network, nano-SnO2 particles are uniformly dispersed and embedded in MoS2 with a layered structure, and the obtained SnO2-MoS2 composite material is tightly connected and encapsulated by the tubular network of CNTs. It is worth noting that the incorporation of layered MoS2 not only effectively anchors the SnO2 nanoparticles, but also provides a broader space for lithium-ion movement due to the larger interlayer spacing. The conductive network of CNTs shortens the diffusion path of electrons and Li+ and provides more diffusion channels. The reversible capacity of the SnO2-MoS2@CNTs nanocomposite material remains at 1069.3 mA h g-1 after 320 cycles at 0.2 A g-1, and it exhibits excellent long-term cycling stability, maintaining 904.5 mA h g-1 after 1000 cycles at 1.0 A g-1. The composite material demonstrates excellent pseudocapacitive contribution rate performance, with a contribution rate of 87% at 2.0 mV s-1. The results indicate that SnO2-MoS2@CNTs has excellent electrochemical lithium storage performance and is a promising anode material for lithium-ion batteries.
RESUMO
Inferior fast-charging and low-temperature performances remain a hurdle for lithium-ion batteries. Overcoming this hurdle is extremely challenging primarily due to the low conductivity of commercial ethylene carbonate (EC)-based electrolytes and the formation of undesirable solid electrolyte interphases with poor Li+-ion diffusion kinetics. Here, a series of EC-free fast-charging electrolytes (FCEs) by incorporating a fluorinated ester, methyl trifluoroacetate (MTFA), as a special cosolvent into a practically viable LiPF6-dimethyl carbonate-fluoroethylene carbonate system, is reported. With a solvent-dominated solvation structure, MTFA facilitates the formation of thin, yet robust, interphases on both the cathode and anode. Commercial 1 Ah graphite|LiNi0.8Mn0.1Co0.1O2 pouch cells filled with the FCE exhibit ≈80% capacity retention over 3000 cycles at 3 C and 4 C (15 min) charging rates in the full range of 0-100% state-of-charge. Moreover, even at a low operating temperature of -20 °C, the 1 Ah cell retains a high capacity of 0.65 Ah at a 2 C discharge rate and displays virtually no capacity fade on cycling at a C/5 rate. The work highlights the power of electrolyte design in achieving extra-fast-charging and low-temperature performances.
RESUMO
Enhancing the phase transition reversibility of electrode materials is an effective strategy to alleviate capacity degradation in the cycling of lithium-ion batteries (LIBs). However, a comprehensive understanding of phase transitions under microscopic electrode dynamics is still lacking. In this paper, the activation polarization is quantified as the potential difference between the applied potential (Uabs) and the zero-charge potential (ZCP) of electrode materials. The polarization potential difference facilitates the phase transition by driving Li-ion adsorption and supplying an electron-rich environment. A novel thermodynamic phase diagram is constructed to characterize the phase transition of the example MoS2 under various Li-ion concentrations and operating voltages using the grand canonic fixed-potential method (FPM). At thermodynamic quasi-equilibrium, the ZCP is close to the Uabs, and thus is used to form the discharge curve in the phase diagram. The voltage plateau is observed within the phase transition region in the simulation, which will disappear as the phase transition reversibility is impaired. The obtained discharge curve and phase transition concentration both closely match the experimental results. Overall, the study provides a theoretical understanding of how polarization affects phase evolution in electrode dynamics, which may provide a guideline to improve battery safety and cycle life.
RESUMO
Silicon-based anodes offer high specific capacities to enhance the energy density of lithium-ion batteries, but are severely hindered by the immense volume expansion and subsequent breakage of the solid-electrolyte-interphase (SEI) during cycling. Herein, we utilize an effective strategy, known as direct-contact prelithiation, to mitigate the challenges associated with expansion and surface instability in SiOx/graphite (SG) anodes. It involves introducing lithium into the anode via physical contact with lithium metal and electrolyte before cycling. Prelithiation of SG anodes with an advanced localized high-concentration electrolyte is shown to develop a mechanically robust artificial SEI that tolerates better the electrode volume expansion. The modified SG anode paired with the high-Ni cathode LiNi0.90Mn0.05Co0.05O2 delivers a high initial capacity of 191 mA h g-1 with 80% capacity retention over 150 cycles, compared to 46% retention with a conventional electrolyte. The bolstered SEI layer with reduced surface reactivity is due to the reduced electrolyte consumption and regulated SEI formation during cycling. Furthermore, the advanced electrolyte and fortified SG anode help reduce cathode degradation, transition-metal dissolution, and loss of active lithium. This study highlights viable prelithiation strategies to stabilize Si-based anodes for high-energy-density batteries through electrolyte design.
RESUMO
Lithium-ion batteries are used in many commercial products such as electronics, cell phones, and e-cigarettes. Use of these batteries has become widespread over recent years due to their chargeability and long-lasting performance. Though a rare occurrence, lithium-ion batteries can fail due to myriad battery defects, which can cause fires and burns. One particular concern is that of thermal runaway, a critical failure marked by a sudden exothermic reaction which occurs as a result of damage to the lithium battery. Thermal runaway can produce heat in excess of 1800 degrees Fahrenheit, causing severe burns to individuals in close proximity. A 39-year-old man presented to an emergency department (ED) with full-thickness burns to his right foot after an episode of lithium-ion battery thermal runaway in his footwarmer. The patient's boot suddenly and unexpectedly caught fire for several seconds prior to being successfully removed. The patient subsequently underwent several weeks of debridements, auto- and homografting, and wound care before eventually making a full recovery. This case highlights the rare, but serious, risk posed by lithium-ion batteries as a result of thermal runaway. This phenomenon can cause devastating full-thickness burns in a matter of seconds. As lithium-ion powered appliances grow in popularity, stringent safety measures should be implemented to prevent catastrophic injuries. Furthermore, healthcare providers should be made aware of injuries caused by thermal runaway to appropriately treat patients.
RESUMO
Single-ion conductive polymer electrolytes can improve the safety of lithium ion batteries (LIBs) by increasing the lithium transference number (tLi+) and avoiding the growth of lithium dendrites. Meanwhile, the self-assembled ordered structure of liquid crystal polymer networks (LCNs) can provide specific channels for the ordered transport of Li ions. Herein, single-ion conductive nematic and cholesteric LCN electrolyte membranes (denoted as NLCN-Li and CLCN-Li) were successfully prepared. NLCN-Li was then coated on commercial Celgard 2325 while CLCN-Li was coated on poly(vinylidene fluoride-hexafluoropropylene) film, coupled with plasticizer, to make NLCN-Li/Cel and CLCN-Li/Pv quasi-solid-state electrolyte membranes, respectively. Their electrochemical properties were evaluated, and it was found that they possessed benign thermal stability and electrolyte/electrode compatibility, high tLi+ up to 0.98 and high electrochemical stability window up to 5.2 V. A small amount (0.5M) of extra Li salt added to the plasticizer could improve the ion conductivity from 1.79 × 10-5 to 5.04 × 10-4 S cm-1, while the tLi+ remained 0.85. The assembled LFP|Li batteries also exhibited excellent cycling and rate performances. The orderliness of the LCN layer played an important role in the distribution and movement of Li ions, thereby affecting the Li deposition and growth of Li dendrites. As the first report of nematic and cholesteric LCN single-ion conductors, this work sheds light on the design and fabrication of ordered quasi-solid-state electrolytes for high-performance and safe LIBs.
RESUMO
The further commercialization of layer-structured Ni-rich LiNi0.83Co0.11Mn0.06O2 (NCM83) cathode for high-energy lithium-ion batteries (LIBs) has been challenged by severe capacity decay and thermal instability owing to the microcracks and harmful phase transitions. Herein, Ti4+-doped NCM83 cathode materials are rationally designed via a simple and low-cost in-situ modification method to improve the crystal structure and electrode-electrolyte interface stability by inhibiting irreversible polarizations and harmful phase transitions of the NCM83 cathode materials due to Ti4+-doped forms stronger metal-O bonds and a stable bulk structural. In addition, the optimal doping amount of the composite cathode material is also determined through the results of physical characterization and electrochemical performance testing. The optimized Ti4+-doped NCM83 cathode material presents wider Li+ ions diffusion channels (c = 14.1687 Å), lower Li+/Ni2+ mixing degree (2.68 %), and compact bulk structure. The cell assembled with the optimized Ti4+-doped NCM83 cathode material exhibits remarkable capacity retention ratio of 95.4 % after 100cycles at 2.0C and room temperature, and outstanding reversible discharge specific capacity of 148.2 mAh g-1 at 5.0C. Even under elevated temperature of 60 °C, it delivers excellent capacity retention ratio of 92.2 % after 100cycles at 2.0C, which is significantly superior to the 47.9 % of the unmodified cathode material. Thus, the in-situ Ti4+-doped strategy presents superior advantages in enhancing the structural stability of Ni-rich cathode materials for LIBs.
RESUMO
The rational design of MoS2/carbon composites have been widely used to improve the lithium storage capability. However, their deep applications remain a big challenge due to the slow electrochemical reaction kinetics of MoS2 and weak bonding between MoS2 and carbon substrates. In this work, anthracite-derived porous carbon (APC) is sequential coated by TiO2 nanoparticles and MoS2 nanosheets via a chemical activation and two-step hydrothermal method, forming the unique APC@TiO2@MoS2 ternary composite. The dynamic analysis, in-situ electrochemical impedance spectroscopy as well as theoretical calculation together demonstrate that this innovative design effectively improves the ion/electron transport behavior and alleviates the large volume expansion during cycles. Furthermore, the introduction of middle TiO2 layer in the composite significantly strengthens the mechanical stability of the entire electrode. As expected, the as-prepared APC@TiO2@MoS2 anode displays a high lithium storage capacity with a reversible capacity of 655.8 mAh g-1 after 150 cycles at 200 mA g-1, and robust cycle stability. Impressively, even at a high current density of 2 A g-1, the electrode maintains a superior reversible capacity of 597.7 mAh g-1 after 1100 cycles. This design highlights a feasibility for the development of low-cost anthracite-derived porous carbon-based electrodes.
RESUMO
Al impurity is among the most likely components to enter the spent lithium-ion battery (LIB) cathode powder due to the strong adhesion between the cathode material and the Al current collector. However, high-value metal elements tend to be lost during the deep removal of Al impurities to obtain high-purity metal salt products in the conventional hydrometallurgical process. In this work, the harmful Al impurity is designed as a beneficial ingredient to upcycle high-voltage LiCoO2 by incorporating robust Al-O covalent bonds into the bulk of the cathode assisted with Ti modification. Benefiting from the strong Al-O and Ti-O bonds in the bulk, the irreversible phase transitions of the upcycled R-LCO-AT have been significantly suppressed at high voltages, as revealed by in situ XRD. Moreover, a Li+-conductive Li2TiO3 protective layer is constructed on the surface of R-LCO-AT by pinning slow-diffusion Ti on the grain boundaries, resulting in improved Li+ diffusion kinetics and restrained interface side reactions. Consequently, the cycle stability and rate performance of R-LCO-AT were significantly enhanced at a high cutoff voltage of 4.6 V, with a discharge capacity of 189.5 mAhg-1 at 1 C and capacity retention of 92.9% over 100 cycles at 4.6 V. This study utilizes the detrimental impurity element to upcycle high-voltage LCO cathodes through an elaborate bulk/surface structural design, offering a strategy for the high-value utilization of spent LIBs.
RESUMO
In this study, state-of-the-art on-line pyrolysis MS (OP-MS) equipped with temperature-controlled cold trap and on-line pyrolysis GC/MS (OP-GC/MS) injected through high-vacuum negative-pressure gas sampling (HVNPGS) programming are originally designed/constructed to identify/quantify the dynamic change of common permanent gases and micromolecule organics from the anode/cathode-electrolyte reactions during thermal runaway (TR) process, and corresponding TR mechanisms are further perfected/complemented. On LiCx anode side, solid electrolyte interphase (SEI) would undergo continuous decomposition and regeneration, and the R-H+ (e.g., HF, ROH, etc.) species derived from electrolyte decomposition would continue to react with Li/LiCx to generate H2. Up to above 200 °C, the O2 would release from the charged NCM cathode and organic radicals would be consumed/oxidized by evolved O2 to form COx, H2O, and more corrosive HF. On the contrary, charged LFP cathode does not present obvious O2 evolution during heating process and the unreacted flammable/toxic organic species would exit in the form of high temperature/high-pressure (HT/HP) vapors within batteries, indicating higher potential safety risks. Additionally, the in depth understanding of the TR mechanism outlined above provides a clear direction for the design/modification of thermostable electrodes and non-flammable electrolytes for safer batteries.
RESUMO
The increasing demand for high-performance electrode materials in lithium-ion batteries has driven significant attention towards Nb2O5 due to its high working voltage, large theoretical capacity, environmental friendliness, and cost-effectiveness. However, inherent drawbacks such as poor electrical conductivity and sluggish electrochemical reaction kinetics have hindered its lithium storage performance. In this study, we introduced KCa2Nb3O10 into Nb2O5 to form a heterojunction, creating a built-in electric field to enhance the migration and diffusion of Li+, effectively promoting electrochemical reaction kinetics. Under the regulation of the built-in electric field, the charge transfer resistance of the KCa2Nb3O10/Nb2O5 anode decreased by 3.4 times compared to pure Nb2O5, and the Li+ diffusion coefficient improved by two orders of magnitude. Specifically, the KCa2Nb3O10/Nb2O5 anode exhibited a high capacity of 276 mAh g-1 under 1 C, retaining a capacity of 128 mAh g-1 even at 100 C. After 3000 cycles at 25 C, the capacity degradation was only 0.012% per cycle. Through combined theoretical calculations and experimental validation, it was found that the built-in electric field induced by the heterojunction interface contributed to an asymmetric charge distribution, thereby improving the rates of charge and ion migration within the electrode, ultimately enhancing the electrochemical performance of the electrode material. This study provides an effective approach for the rational design of high-performance electrode materials.
RESUMO
Localized high-concentration electrolytes (LHCEs) have emerged as a promising class of electrolytes to improve the cycle life and energy density of lithium-ion batteries (LIBs). While their application in batteries with lithium-metal anodes is extensively investigated, their behavior in systems with graphite anodes has received less research attention. Herein, the behaviors of four electrolytes in Graphite | LiNiO2 cells are compared. By systematically varying the electrolyte compositions, the impacts of the solvation structure, solvent composition, and salt composition of LHCEs are identified on the rate capability, stability, and propensity for lithium plating in LIB full-cells. It is found that while the solvation structure and solvent composition each play an important role in determining rate capability, the substitution of LiPF6 salt with LiFSI maximizes the rate capability and suppresses irreversible lithium plating. It is now demonstrated via constant-potential cycling, that an appropriately formulated LHCE can, therefore, maintain high reversible capacity and safety under arbitrarily fast charging conditions.
RESUMO
The concerns on the cost of lithium-ion batteries have created enormous interest on LiFePO4 (LFP) and LiMn1-xFexPO4 (LMFP) cathodes However, the inclusion of Mn into the olivine structure causes a non-uniform atomic distribution of Fe and Mn, resulting in a lowering of reversible capacity and hindering their practical application. Herein, a co-doping of LMFP with Nb and Mg is presented through a co-precipitation reaction, followed by a spray-drying process and calcination. It is found that LiNbO3 formed with the aliovalent Nb doping resides mainly on the surface, while the isovalent Mg2+ doping occurs into the bulk of the particle. Full cells assembled with the co-doped LMFP cathode and graphite anode demonstrate superior cycling stability and specific capacity, while maintaining good tap density, compared to the undoped or mono-doped (only with Nb or Mg). The co-doped sample exhibits a capacity retention of 99% over 300 cycles at a C/2 rate. The superior performance stems from the enhanced ionic/electronic transport facilitated by Nb coating and the enhanced Mn2+/3+ redox kinetics resulting from bulk Mg doping. Altogether, this work reveals the importance of the synergistic effect of different dopants in enhancing the capacity and cycle stability of LMFP.
RESUMO
The recycling of spent lithium ion batteries is of great significance because it contains large amounts of valuable metals. But current recovery methods exhibit limited efficiency in selectively extracting lithium from spent electrode materials and spent graphite becomes metallurgical residues. In this study, we propose a novel recycling flowchart that combines flotation with multi-stage water-leaching to enhance the recovery of graphite and lithium from black mass derived from spent lithium ion batteries. Removal of organics can be conducted by pyrolysis, at the same time, the spent ternary cathode material was decomposed into CoO, NiO, and MnO at a temperature of 600 °C for 60 min using pyrolysis product-derived reductant. The sub-microlevel migration behavior of lithium ions in electrode materials was also examined. The electrode material aggregates were broken up by water crushing, and 38.67 % lithium dissolves into water for recycling. Bubble flotation was used to recycle the excess graphite from the black mass while the residual graphite was used as reductant for the carbothermal reduction. Using the developed scheme, we were able to recover 95.51 % of lithium after carbothermal reduction with 12.31 % carbon residue. Based on basic research, a novel recycling flowchart of spent lithium-ion batteries has been proposed.
Assuntos
Fontes de Energia Elétrica , Grafite , Lítio , Reciclagem , Grafite/química , Lítio/química , Reciclagem/métodos , Eletrodos , Óxidos/químicaRESUMO
A great challenge in the commercialization process of layered Ni-rich cathode material LiNixCoyMn1-x-yO2 (NCM, x ≥ 80%) for lithium-ion batteries is the surface instability, which is exacerbated by the increase in nickel content. The high surface alkalinity and unavoidable cathode/electrolyte interface side reactions result in significant decrease for the capacity of NCM material. Surface coating and doping are common and effective ways to improve the electrochemical performance of Ni-rich cathode material. In this study, an in situ reaction is induced on the surface of secondary particles of NCM material to construct a stable lithium sulfate coating, while achieving sulfur doping in the near surface region. The synergistic modification of lithium sulfate coating and lattice sulfur doping significantly reduced the content of harmful residual lithium compounds (RLCs) on the surface of NCM material, suppressed the side reactions between the cathode material surface and electrolyte and the degradation of surface structure of the NCM material, effectively improved the rate capability and cycling stability of the NCM material.