A novel model of locking plate and locking spongious screw: a biomechanical in vitro comparison study with classical locking plate.

BACKGROUND: Locking plates are commonly used for the fixation of comminuted, periprosthetic and osteoporotic bone fractures. These plates are secured to the bone with screws, creating a stable connection with fixed angle between the plate and the screws. In this biomechanical in vitro study, our aim is to evaluate and compare the novel locking plate-locking spongious screw model with FDA approved classical locking plate. METHODS: Sawbone PCF-15 osteoporotic bone model was utilized to simulate osteoporotic bone conditions. Two screws were used to attach both the classical locking plate and the novel locking plate-locking spongious screw model to these bone models. The attachment strength of the screws to the bone blocks was measured by pull-out tests. RESULTS: Novel locking plate-locking spongious screw model exhibited an 84.38% stronger attachment to the osteoporotic bone model compared to the current locking plate model. CONCLUSIONS: In conclusion, one of the important problems in the locking plates which is the high Pull-out risk of the locking spongious screws can been resolved with our proposed new model and has a chance of having a better purchase especially in osteoporotic bones.

Comparisons of ankle arthrodesis with different internal fixation methods in the treatment of post-traumatic osteoarthritis.

BACKGROUND: The aim of this study was to explore the clinical efficacy of ankle arthrodesis with different internal fixation methods in the treatment of post-traumatic osteoarthritis. METHODS: We collected 85 patients with post-traumatic osteoarthritis who underwent different ankle arthrodesis between December 2015 and December 2020. The operation performance, complication rate, hindfoot alignment, talus tilt angle, visual analogue scale (VAS), and American Orthopedic Foot and Ankle Society (AOFAS) score were preoperatively and postoperatively evaluated. RESULTS: In an anterior approach, the locking plate-fixation exhibited a similarity in operation time, incision length, postoperative drainage, bone fusion, hindfoot alignment, and talus tilt angle with fibula support compression screw-fixation, but it was better in increasing postoperative AOFAS. The locking plate-fixation in the anterior approach had lower operation time, incision length, and postoperative drainage than that in the lateral approach. In addition, the lateral locking plate combined with posterolateral compression screw fixation (LLPPCSF) presented shorter bone fusion time, higher AOFAS score, and lower complication rate than either plate- or screw-fixation alone. CONCLUSION: Lateral locking plate fixation was better than fibula support compression screw fixation in relieving postoperative pain. Anterior locking plate fixation was more time-saving and less invasiveness than lateral locking plate fixation, but its application was limited in low degree of ankle deformation. LLPPCSF was the most effective in improving bone fusion and postoperative pain, considering an optimal option for the treatment of post-traumatic osteoarthritis.

Quality of life, functional and radiological outcomes of treatment of three-part and four-part proximal humerus fractures with locking plates and comparison in young versus older than 70 years: a retrospective cohort study.

PURPOSE: Verify if the use of locking plates in displaced three- and four-part proximal humerus fractures has meant an improvement even in patients over 70 years of age. MATERIAL AND METHODS: We performed surgery with locking plate fixation in 56 consecutive patients with three- and four-part proximal humerus fractures according to Neer's classification between 1/1/15 and 12/31/20 at our Hospital. Patient satisfaction, quality of life, functionality and radiological variables, as well as the comparison between patients older and younger than 70 years were the main outcomes. Likewise, factors and complications that may have influenced these variables were analyzed as secondary outcomes. The analysis of all these variables was performed after a minimum follow-up time of 24 months after surgery. RESULTS: 51 patients (92%) ended up satisfied or very satisfied according to the SF-36 test and with no disability or mild disability according to the DASH Score questionnaire. 46 patients (82%) obtained a satisfactory or excellent result according to the Neer scale modified by Cofield and 38 (68%) a good or excellent function according to the Constant Murley questionnaire. In 47 cases (84%) good radiological alignment was observed. Complications occurred in 20 patients (36%). The complications and the results of the SF-36, DASH Score, Neer scale modified by Cofield and Constant Murley tests depended on the radiological alignment (p = 0.009, p = 0.006, p = 0.025, p = 0.0008 and p = 0.0004). There were 37 patients younger than 70 years and 19 older than 70 years with no statistically significant differences when comparing the two groups. CONCLUSIONS: This study demonstrates that satisfactory results can be obtained with osteosynthesis with locking plates in displaced proximal humerus fractures even in patients older than 70 years of age. LEVEL OF EVIDENCE III: Retrospective Cohort, Treatment Study.

Combining non-vascularized fibula and cancellous graft in the masquelet technique: A promising approach to distal femur compound fracture management with large defects.

INTRODUCTION: Compound fractures of the distal femur with large defects pose a significant challenge in management, with several options available, including external fixators, bone grafting, the Masquelet-induced membrane technique, and free vascularized fibular grafts. The Masquelet-induced membrane technique involves placing a cement spacer in the defect to create a biologically active membrane. In the second stage, the gold standard for filling the defect is an autologous cancellous bone graft of 1-2 mm in size. This study aims to examine the effects of using a non-vascularized fibula as a support combined with a cancellous graft in the Masquelet technique for treating compound fractures of the distal femur. METHODS: The study was conducted between December 2017 and December 2020 and included 11 patients who underwent the Masquelet technique. The procedure involved a lateral locked plate and an antibiotic-impregnated bone cement spacer, followed by a 20-30 mm longer ipsilateral fibula used as a strut graft. The remaining area was filled with cancellous bone from the iliac crest. The size of the defect, Time to the bony union, the average range of motion of the knee, and any complications are analysed. The final evaluation was done at 18 months using the Lower Extremity functional scale to assess functional outcomes. RESULTS: The study included 11 patients (8 male and 3 female) with a mean age of 45.8 years. The average time to bony union was 6.6 months, and the average range of motion of the knee was 2.2° to 93.3 ° (0-110 °). No complications such as infection, non-union, or implant failure were observed. CONCLUSION: The Masquelet Technique combined with a fibular strut graft is a feasible solution for complex distal femur fractures with bone loss. The non-vascularized fibula graft provides both structural support and reduces the amount of cancellous bone graft needed, which results in earlier weight bearing and improved functional outcomes.

Clinical outcomes of capitellar fractures with posterior comminution treated with Herbert screws combined with metacarpal locking plates.

BACKGROUND: The treatment of Dubberley type B capitellar fractures, which are frequently complicated, is widely debated. This study aimed to investigate the prognostic factors and clinical outcomes of Dubberley type B capitellar fractures treated with Herbert screws combined with posterior buttress plates. METHODS: Seven men and nine women (aged 30-68 years) with Dubberley type B capitellar fractures were operated on with Herbert screws combined with posterior buttress plates. The patients were classified into Dubberley types IB (seven), IIB (four), and IIIB (five). Complications and bone union were observed, and functional outcomes were evaluated by the Mayo Elbow Performance Index (MEPI). RESULTS: All patients were followed up for a mean period of 23.5 months (12-30 months). All fractures healed in 8-14 weeks (mean, 10.5 weeks). No cases of non-union, elbow instability, or avascular necrosis occurred. Degenerative arthritis occurred in 7 (44%) and heterotopic ossification in 11 (69%) patients. The median MEPI score was 92.5 (interquartile range, 85-100) points, with 11 reporting excellent, 3 good, and 2 fair outcomes. The MEPI scores of type IIIB fractures were significantly lower than those of types IB and IIB fractures, while the MEPI scores of type IB and IIB fractures did not differ significantly. CONCLUSIONS: Dubberley type IIIB capitellar fractures with multiple articular fragments have a poorer prognosis than type IB and IIB fractures. However, Herbert screw fixation combined with posterior metacarpal locking plates is feasible, providing satisfactory recovery of elbow joint function.

Arthrodesis of the first metatarsophalangeal joint for severe hallux valgus in adolescents with cerebral palsy: A retrospective comparison study of three surgical techniques.

Purpose: We compared the outcomes of arthrodesis of the first metatarsophalangeal joint for severe hallux valgus in 31 adolescents with cerebral palsy, using three different methods of fixation: K-wires, non-locking plates, and locking plates. Methods: Clinical outcomes included time to weight-bearing, fusion rates and surgical complications. Radiographic assessment included comparing pre- and post-operative hallux valgus angles, intermetatarsal angles, interphalangeal angles, and lateral metatarsophalangeal angles. Patient-reported outcomes included pre- and post-operative visual analogue scales addressing bunion pain and concerns, difficulties with wearing shoes and braces, and difficulties with foot hygiene. Results: Of the 31 adolescents (16 male), 10 patients had K-wire fixation, 11 had a non-locking dorsal plate, and 10 had fixation with a dorsal locking plate. Mean age at surgery was 16 years (12-18 years) and mean follow-up was 4 years (2.7-6.5 years). Patients with K-wire fixation had delayed weight-bearing and had more complications than those managed by dorsal plating. There were significant improvements in radiographic parameters (except interphalangeal angle) and in patient-reported outcomes, in all groups (p < 0.001). However, radiographic and clinical outcomes were better in the dorsal plating groups compared to the K-wire group. Conclusion: Arthrodesis of the first metatarsophalangeal joint gave good correction of deformity with improvements in symptoms and radiographic parameters in adolescents with cerebral palsy. We recommend dorsal plating that allowed early weight-bearing and had fewer complications with better clinical and radiographic outcomes, than K-wire fixation. Level of evidence: IV: Retrospective case series.

Resistance and Stress Analysis of 3D Plate and Locking Plate Fixation in Bilateral Sagittal Split Osteotomy: A Comparative Finite Element Study.

Aim: This study evaluates the biomechanical properties of 3D plates and compares it with locking plates, in both set back and advancement models of bilateral sagittal split osteotomy (BSSO) using finite element model analysis. Design: A stereolithography model of mandibular structure was imported to hypermesh to create 3D solid finite model. A BSSO was simulated on hemimandibular model and advancement and setback simulations were carried out for a distance of 4, 6, and 8 mm each. 3D plates for the right side and locking plates for the left side were simulated for fixation. Meshing of the model was carried out. After meshing, the model was imported to Ansys V18.1 for analysis of it. Forces simulating the masticatory muscles were applied on both sides. The values for stress and resistance in the screws and plates were measured and the lowest and highest deformation regions were estimated using von Mises analysis. Results: The results suggest that the tension and resistance as measured through were better distributed in 3D plates when compared with that of locking plates; the stress concentration was shown to be higher in the locking plates and deformation resistance was greater in 3D plates. Conclusion: The application of 3D plating system has found its place in the field of maxillofacial trauma. However, its application in the field of orthognathic surgery is yet to be explored and this study encourages us to conduct in vivo studies.

Locking conical coupling plates in small animal orthopedics: A review.

Conical coupling locking plates (CCP) have become an interesting alternative in veterinary orthopedics and traumatology. Available data in this regard, however, must be interpreted with caution, and several studies are still required to reach definitive conclusions on the clinical use of these implants. In this context, this review aims to discuss CCP applications and mechanical aspects in small animals and summarize in vivo, in vitro and ex vivo study results.

Biomechanical testing of osteosynthetic locking plates for proximal humeral shaft fractures - a systematic literature review.

Proximal humeral shaft fractures can be treated with helically deformed bone plates to reduce the risk of iatrogenic nerve lesion. Controversially to this common surgical technique that was first established in 1999, no biomechanical investigation on humeral helical plating is recorded by other reviews, which focus on proximal fractures exclusively. Does an additional scope for shaft fractures reveal findings of helical testing? The present systematic literature review was performed based on guidelines by Kitchenham et al. to systematically search and synthesize literature regarding biomechanical testing of osteosynthetic systems for proximal humeral shaft fractures. Therefore, a systematic approach to search and screen literature was defined beforehand and applied on the findings of the database PubMed®. Synthesized information of the included literature was categorized, summarized and analyzed via descriptive statistics. Out of 192 findings, 22 publications were included for qualitative synthesis. A wide range of different test methods was identified, leading to a suboptimal comparability of specific results between studies. Overall, 54 biomechanical test scenarios were identified and compared. Physiological based boundary conditions (PB-BC) were referenced in 7 publications only. One study of testing straight and helical dynamic compression plates without PB-BCs was identified, showing significant differences under compressional loading. The absence of test standards of specific fields like humeral fractures lead to a high variance in biomechanical testing of osteosynthetic locking plates for proximal humeral shaft fractures. Physiological approaches offer realistic test scenarios but need to be uniformed for enhanced comparability between studies. The impact of helically deformed locking plates under PB-BC was not identified in literature.

Current standard of care for distal femur fractures in Germany and Switzerland.

BACKGROUND: Distal femur fractures occur with an incidence of 4.5/100,000 and show a prevalence of 0.4%. Causes include low-impact trauma in older patients and high-impact trauma in younger patients without pre-existing medical conditions. The aim of this study was to perform a comprehensive evaluation of trauma mechanisms, trauma-promoting factors, comorbidities, medication history and type of surgical care to provide an overview of the causes of injury and the most appropriate therapeutic approach. METHODS: In this multicenter cohort study a retrospective analysis of 229 patients who sustained a distal femur fracture between January 2011 and December 2020 was performed. Individual fracture patterns, fracture predisposing factors, concomitant disease profiles, medication history, treatment strategy and associated complications were analyzed. RESULTS: 229 patients were included in the retrospective analysis. A total of 113-type 33 A, 50-type 33 B and 66-type 33 C fractures were diagnosed, of whom 92% received a lateral locking plate osteosynthesis. There was a complication in 14.4% of all cases, of which 6.1% were attributable to infection. Significant risk factors for developing a complication were an increased BMI (29.9 ± 8.5 kg/m2; p = 0.04), fracture displacement of over half a shaft width (p < 0.001) and AOC fractures (p < 0,016), specifically C2 fractures (p < 0,008). CONCLUSION: In this multicenter retrospective cohort study, lateral locking plate osteosynthesis was the method of choice and was selected in over 90% of cases, regardless of the fracture classification and risk factors. A complication rate of 14.4% emphasizes the necessary analysis of patient- and care-specific risk factors and a resulting adjustment of the therapy strategy. An increased BMI (29.9 ± 8.5 kg/m2; p = 0.04), fracture displacement of over half a shaft width (p < 0.001) and AOC fractures (p < 0,016), specifically C2 fractures (p < 0,008) increase the risk of developing a complication and should prompt an early switch to a treatment strategy that provides more stability.

Outcomes Following Type C Distal Humeral Fracture Fixation Using Two Different Osteosynthesis Techniques.

BACKGROUND: Distal humeral fractures are notorious injuries, and they require surgical fixation. The reliability of reconstruction devices has been a subject of debate. Our primary outcome was to detect differences, if any, between two different groups of patients using the patient-reported outcomes measurement information system (PROMIS) Global-10 form and to compare it with the Mayo elbow performance score (MEPS) results. Other secondary outcomes included the difference in union time between patients who received a reconstruction plate vs those who received a pre-contoured anatomical plate. MATERIAL AND METHODS: It is a prospective randomised study which included a total of 30 cases equally distributed into two groups. RESULTS: The mean PROMIS and MEPS scores for group A were 31.5 SD 6.6 and 77.7, respectively, compared to 33.7 SD 6.66 and 73, respectively, for the other group. Time to union was 13.4 weeks for group A and 12.6 weeks for the other group. There was no statistically significant difference between the groups regarding union and function. However, reconstruction plates were more cost effective. The correlation between the MEPS and PROMIS G scores in both groups was statistically significant. CONCLUSION: 1. Recon plates continue to be a cost-effective method of treatment in simple intra-articular fractures. 2.PROMIS is a valuable tool to be used along with other scores in future studies.

Clinical and Functional Outcomes of Anatomical Plating in Distal Humerus Fractures in Adults.

Background Overall, 2% of all adult fractures are attributed to fractures of the distal humerus, including both supracondylar and intercondylar fractures. According to recent studies, stable fixation with anatomical reduction of intra-articular fragments and early mobilization is required for best outcomes. This study included patients with distal end humerus fractures treated by open reduction and internal fixation (ORIF) with anatomical locking plates and evaluated their clinical outcomes. Methodology This prospective study was conducted at a medical college teaching hospital in southern Rajasthan, India. In total, 20 adult patients with distal end humerus fractures who presented to the orthopedic outpatient department or casualty were admitted. Patients were treated by ORIF with anatomical locking plates, followed up, and evaluated for clinical and functional outcomes. Results Using the Mayo Elbow Performance Score, out of 20 cases, excellent results were noted in five patients, good results in seven patients, fair results in six patients, and poor results in two patients. Conclusions Locking plates are reliable and effective management options for distal humerus fractures. As locking plates are strong and rigid, the period of immobilization can be decreased. Early mobilization helps in preventing joint stiffness and fixed deformity of the joint.

Comparison of Complications, Metalwork Removal and Cost Between Locking and Tubular Plates for Lateral Malleolus Fractures Fixation.

Introduction Ankle fractures are common injuries in orthopaedic practice. Open reduction with internal fixation is the main line of management of displaced ankle fractures in fit patients. The study aims to analyse the complications, re-operation rate and cost difference between one-third tubular and locking plates which are the most frequently used constructs in lateral malleolus fractures. Materials and methods The total number of presented ankle fractures from April to August during the years 2015, 2017 and 2019 to our Tertiary Hospital in the United Kingdom were screened. Data including operative fixation, plate used, complication rates, the need for revision surgery and metalwork removal were collected from the hospital's electronic Virtual Trauma Board. Patients who had less than one-year follow-up were excluded. Results A total of 174 patients were included which represents more than half of presented ankle fractures (56%) with a decline in the mean age of operated patients from 56.4 in 2015 to 46.2 in 2019. The majority of fixation used tubular plates (n=122) versus (n=52) for locking plates. Locking plate fixation doubled from 10 in 2015 to 23 in 2019. However, they only contributed to 27% of the total operated ankle fractures. Despite the initial higher complications and removal rates of locking plates in 2015 (P<0.042 and P<0.038 respectively), there was no significant difference in overall complications, revision rates, and metalwork removal between locking plates and tubular plates (p=0.084, FEp= 0.158 and p=0.096 respectively). There was an estimated extra cost of £15938.60 for the use of locking plates during the study timeline. Conclusion There was no significant difference in overall complications, revision surgery and metalwork removal between tubular and locking plates in treating lateral malleolus fractures despite the significantly higher cost of locking constructs. Further studies are needed to illustrate the trend and cost-effective analysis of the tubular and locking plates in treating ankle fractures.

Outcome Evaluation of Distal Femoral Fractures Following Surgical Management: A Retrospective Cohort Study.

BACKGROUND: Distal femur fractures are challenging in surgical management as the outcome is crucial for restoring the biomechanical stability and longitudinal axis of the leg and function of the knee joint. METHODS: A retrospective review of all distal femoral fractures treated in a level I trauma center over a decade was performed. The radiographs were reviewed for fracture entity, osseous healing, implant failure, mechanical axis, and degenerative joint changes. Clinical outcome was reviewed regarding postoperative complications and postoperative range of motion of the knee joint. RESULTS: 130 patients who were managed with screw fixation (n = 35), plating systems (n = 92) or intramedullary nailing systems (n = 3) remained for evaluation. Mean follow up was 26 months. Clinical outcome was significantly better for flexion degrees following screw fixation (p = 0.009). Delayed fracture union (p = 0.002) or non-union (p = 0.006) rates were significantly higher in plate osteosynthesis. Mild pathologic deformity for varus and valgus collapse was found following plate osteosynthesis. CONCLUSIONS: Screw fixation shows fewer postoperative complications than plate fixation and is favored for extra and partial intraarticular distal femur fractures. Plating constructs remain the superior fixation method in complex distal femur fractures but are associated with higher rates of non-union and leg axis deviation.

Talo-navicular and calcaneo-cuboid fusion with PEEK H-pode™ vs. Titanium Maxlock™ locking plates: Comparison of functional and radiographic outcomes.

BACKGROUND: Locking plates are increasingly used to achieve hindfoot fusion. The objective of this study was to compare hindfoot fusion outcomes with the PEEK H-pode™ (Biotech™) locking plate and the titanium Maxlock™ (Tornier-Wright™) locking plate. HYPOTHESIS: A polyetheretherketone (PEEK) H-pode™ locking plate provides similar fusion rates to a titanium Maxlock™ locking plate for talo-navicular and calcaneo-cuboid arthrodesis. METHODS: We conducted a retrospective comparative study in 39 patients (including 21 [54%] with pes planovalgus and 11 [28%] with neurological equinovarus deformities) who underwent talo-navicular and/or calcaneo-cuboid fusion, usually combined with subtalar fusion. The first 17 patients (January 2014-February 2016) were managed with Maxlock™ locking plates and the next 22 patients (March 2016-August 2018) with H-pode™ locking plates. These two cohorts of consecutive patients were comparable regarding age, sex distribution, body mass index, and comorbidities. At last follow-up more than 1year after surgery, we compared functional scores, pain intensity, and fusion assessed by radiographs and computed tomography (CT) (threshold set at 33%). RESULTS: Mean follow-up was 42months (range: 34-63months) in the Maxlock™ group and 25months (range: 12-36months) in the H-pode™ group. At last follow-up, the two groups were not significantly different for the mean values of the American Orthopedic Foot & Ankle Society score, European Foot & Ankle Society score, and visual analogue scale pain score. Neither were the two groups significantly different for talo-navicular and calcaneo-cuboid fusion by CT. In the Maxlock™ group, we found non-significant trends towards a higher proportion of patients with talo-navicular nonunion (18% vs. 5% in the H-pode™ group) and weaker talo-navicular fusion in patients with pes planovalgus (60.8% vs. 82.0%, respectively). Radiographic results overestimated the fusion rates. DISCUSSION: Talo-navicular and calcaneo-cuboid fusion was not significantly different with H-pode™ and Maxlock™ locking plates. CT was more accurate than standard radiography to assess fusion. These results underline the usefulness of PEEK locking plates for talo-navicular and calcaneo-cuboid fusion; moreover, the radiolucency of PEEK facilitates the interpretation of radiographs. LEVEL OF EVIDENCE: IV.

Locked Wire Fixator for a Distal Radius Fracture With Malunion: A Case Report.

Surgical treatment for a distal radius fracture using a volar locking plate is difficult if the distal radius malunion remains. Therefore, a different surgical method from volar locking plate fixation should be required. We report the case of an 83-year-old woman with a left dorsal displaced distal radius fracture. However, the deformity of the volar cortex of the radius was recognized because of a previous distal radius fracture. Therefore, osteosynthesis with a locked wire fixator was performed. At 12 months after surgery, the patient has returned to daily activities without difficulty. A locked wire fixator can be useful for treating a distal radius fracture with malunion of the volar cortex of the distal radius.

Outcomes and complications after open reduction and internal fixation of distal humeral fractures with precontoured locking plates.

Objectives: The aim of this study was to evaluate functional and radiographic results after open reduction and internal fixation of distal humeral fractures using precontoured locking plates. Our main hypothesis was that patients older than 65 years have inferior outcomes compared with younger patients. Methods: All patients treated for a distal humeral fracture with precontoured locking plates between 2006 and 2017 at a level 1 trauma center were identified. Included patients underwent a clinical examination, and new radiographs were obtained. Functional outcomes were evaluated using Quick Disability of the Arm, Shoulder and Hand, Mayo Elbow Performance Score, visual analog scale elbow satisfaction, and range of motion. Complications and reoperations were recorded. Results: Fifty-seven patients with a median age of 60 years were included in this study. Median Quick Disability of the Arm, Shoulder and Hand was 14, and median Mayo Elbow Performance Score was 85. There was no difference in functional scores in patients younger than 65 years or 65 years or older. However, the median flexion-extension arc was 121 degrees in patients younger than 65 years and 111 degrees in patients 65 years or older (P = 0.01). The overall complication rate was 68%, and 24 patients had at least 1 reoperation. Ulnar neuropathy was the most common complication followed by reduced range of motion. Conclusions: Operative management of distal humeral fractures with precontoured locking plates provides good functional outcome. The patient-reported outcomes were good, independent of patient age. The implant failure rate is low with precontoured locking plates; however, the complication rate remains high, and reoperations are common. Level of Evidence: Level 4, retrospective study.

Low-intensity pulsed ultrasound does not promote bone healing and functional recovery after open wedge high tibial osteotomy.

AIMS: To evaluate whether low-intensity pulsed ultrasound (LIPUS) accelerates bone healing at osteotomy sites and promotes functional recovery after open-wedge high tibial osteotomy (OWHTO). METHODS: Overall, 90 patients who underwent OWHTO without bone grafting were enrolled in this nonrandomized retrospective study, and 45 patients treated with LIPUS were compared with 45 patients without LIPUS treatment in terms of bone healing and functional recovery postoperatively. Clinical evaluations, including the pain visual analogue scale (VAS) and Japanese Orthopaedic Association (JOA) score, were performed preoperatively as well as six weeks and three, six, and 12 months postoperatively. The progression rate of gap filling was evaluated using anteroposterior radiographs at six weeks and three, six, and 12 months postoperatively. RESULTS: The pain VAS and JOA scores significantly improved after OWHTO in both groups. Although the LIPUS group had better pain scores at six weeks and three months postoperatively, there were no significant differences in JOA score between the groups. The lateral hinge united at six weeks postoperatively in 34 (75.6%) knees in the control group and in 33 (73.3%) knees in the LIPUS group. The progression rates of gap filling in the LIPUS group were 8.0%, 15.0%, 27.2%, and 46.0% at six weeks and three, six, and 12 months postoperatively, respectively, whereas in the control group at the same time points they were 7.7%, 15.2%, 26.3%, and 44.0%, respectively. There were no significant differences in the progression rate of gap filling between the groups. CONCLUSION: The present study demonstrated that LIPUS did not promote bone healing and functional recovery after OWHTO with a locking plate. The routine use of LIPUS after OWHTO was not recommended from the results of our study. Cite this article: Bone Jt Open 2022;3(11):885-893.

Different treatments for 3- or 4-part proximal humeral fractures in the elderly patients: A Bayesian network meta-analysis of randomized controlled trials.

Background: Proximal humeral fractures are the third most common fracture in the body, and their incidence is rising year by year as the population ages. However, the treatment of the proximal humerus in parts 3 and 4 is still debatable, necessitating a network meta-analysis to determine the best treatment for each treatment modality. Methods: We searched PubMed, Embase, Cochrane Library for randomized controlled trials on proximal humeral fractures up to June 21, 2022. We performed data extraction and literature quality assessment by two independent authors and extracted constant score and reoperation rate as indicators for evaluation. Stata software, Revman software, JAGS software and the R-based BlandAltmanLeh package, gemtc package and riags package were used to perform this Bayesian network meta-analysis. Results: Following screening, 11 papers with a total of 648 participants were included in the analysis. The SUCRA values for the constant score were in the following order: RSA, IMN, Conservative, HA, and LP, and the SUCRA values for the reoperation rate were LP, HA, IMN, Conservative, and RSA. Conclusion: The elderly with 3- or 4-part proximal humeral fractures should consider RSA because it received the best evaluation ranking in terms of constant score and reoperation rate. Systematic Review Registration: https://www.crd.york.ac.uk/prospero/display_record.php?ID=CRD42022341209, identifier: CRD42022341209.

Surgical treatment for sternoclavicular joint dislocations.

Introduction: Sternoclavicular joint dislocations are infrequent among all joint injuries. Conservative management is often described and recommended as a means of closed reduction and immobilization of the affected limb. This study aims to review results of patients affected by this injury who were treated surgically using locking plates. Materials and methods: A descriptive case series study was carried out. Cases of patients affected with sternoclavicular joint dislocation treated with open reduction and fixation with locking plates between 2009 and 2019 were included. The Constant score was applied to each patient to assess functional outcome. Results: According to inclusion criteria, 15 patients were included, 12 males and 3 females. Post-operative assessment showed very positive results since the range of Constant scores was consistently over 90 in all cases. Discussion: Fixation of sternoclavicular joint dislocations using locking plates had a low complication rate and provided good functional results.Level of evidenceIV.