RESUMO
A "spontaneous" correction of the Class II malocclusion has been described after maxillary expansion (ME) treatment. The aim of the present review was to systematically summarize changes in the sagittal dentoskeletal parameters of growing Class II patients after ME. The study protocol was developed according to the PRISMA statement and registered in PROSPERO before literature search, data extraction and analysis. The PICO model was followed in the definition of the research question, search strategies and study selection criteria. Randomized and non-randomized studies on the sagittal effects of ME published in English language without date restrictions were electronically searched across the Cochrane Library, Scopus and MEDLINE/PubMed databases. Changes in sagittal dentoskeletal cephalometric parameters were analysed. The risk of bias in randomized and nonrandomized studies was assessed using the Rob2 and ROBINS-I tools, respectively. A narrative synthesis was performed, focusing on the investigated population, intervention, comparison, and main outcomes. Pairwise meta-analyses were used to compare the outcomes assessed in subjects who underwent ME versus untreated subjects. Ten studies met the inclusion criteria, four were included in the pairwise meta-analyses due to the presence of a control group. Slight but significant improvements in OVJ (MD: -0.36; 95%; CI [-0.69 to -0.01]; p = .04) and 6/6 molar relation (MD: 1.5; 95%; CI [0.69 to 1.61]; p < .0001) were found in patients who underwent ME compared with untreated subjects, whereas no improvement in skeletal parameters was observed. However, the limitations of a small body of moderate-quality evidence and possible confounding factors should be considered. Evidence on the sagittal skeletal and dental effects of ME in Class II patients is still ambiguous, suggesting the need for more clinical trials, including appropriate control subjects, randomization and blinding during outcome assessment.
RESUMO
Aligners became popular among adult patients for their superior aesthetics and comfort in comparison to conventional fixed appliances. It has undergone numerous enhancements over time, allowing it to address more complex malocclusions. Many researchers argued that managing vertical discrepancies is more challenging than addressing anteroposterior issues. This complexity arose from the mechanical requirements for treatment and the required mechanics to prevent relapse. Studies assessing the treatment outcome of anterior open bite closure using clear aligners have yielded conflicting results regarding the mechanisms of bite closure. Proposed mechanisms included extrusion of upper or lower incisors, lingual tipping of upper or lower incisors, intrusion of upper or lower molars, counterclockwise rotation of the mandible, or various combinations of these mechanisms. The research highlighted the biomechanical challenges associated with using aligners for the treatment of deep bites as mandibular incisor intrusion and leveling the curve of Spee remain among the least predictable movements. Given the widespread use of aligners, it is imperative to rigorously assess the effectiveness of clear aligners in achieving overbite correction to ensure they deliver the desired outcome. This review aimed to assess the performance of Invisalign in the management of vertical discrepancies. It sought to identify the dentoskeletal effects of clear aligners in addressing deep bite and anterior open bite cases, understand the mechanisms behind overbite correction, and provide a comprehensive overview of the existing research on this topic.
RESUMO
OBJECTIVES: To evaluate changes of the upper airway and oral cavity volumes in patients with skeletal Class III malocclusion undergoing bimaxillary orthognathic surgery, and to analyze the correlation between postoperative upper airway decrease and the amount of jaw movement and oral cavity volume reduction. MATERIALS AND METHODS: Thirty patients (16 males and 14 females) undergoing bimaxillary surgery were included. Three-dimensional reconstruction of the upper airway and oral cavity were performed using preoperative (T0) and postoperative (T1) (6 months) cone-beam computed tomography scans. RESULTS: The volume, sagittal area and minimum cross-sectional area of the upper airway were diminished (P < .001). The decrease in volume and minimum cross-sectional area in the oropharyngeal region of the upper airway were weakly correlated with B-point posterior movement (P < .05). Total oral cavity volume was decreased, with maxillary oral volume increasing and mandibular oral volume decreasing (P < .001). Upper airway decrease was highly correlated with total oral volume reduction and mandibular oral volume reduction, with the most significant correlation being with total oral volume reduction (P < .001). CONCLUSIONS: Class III bimaxillary surgery reduced the volume, sagittal area, and minimum cross-sectional area of the upper airway as well as oral cavity volume. Upper airway changes were weakly correlated with anterior-posterior mandibular movement but significantly correlated with oral cavity volume changes. Thus, oral cavity volume reduction is a crucial factor of upper airway decrease in patients with skeletal Class III malocclusion undergoing bimaxillary orthognathic surgery.
Assuntos
Tomografia Computadorizada de Feixe Cônico , Imageamento Tridimensional , Má Oclusão Classe III de Angle , Boca , Procedimentos Cirúrgicos Ortognáticos , Humanos , Tomografia Computadorizada de Feixe Cônico/métodos , Má Oclusão Classe III de Angle/cirurgia , Má Oclusão Classe III de Angle/diagnóstico por imagem , Feminino , Masculino , Procedimentos Cirúrgicos Ortognáticos/métodos , Adulto , Boca/diagnóstico por imagem , Imageamento Tridimensional/métodos , Adulto Jovem , Projetos Piloto , Maxila/diagnóstico por imagem , Maxila/cirurgia , Adolescente , Mandíbula/diagnóstico por imagem , Mandíbula/cirurgia , Orofaringe/diagnóstico por imagem , Orofaringe/patologia , Faringe/diagnóstico por imagemRESUMO
Premature loss of first permanent molars is a common occurrence in clinical practice, leading to abnormal occlusion and inefficient mastication for patients. This case report presented the orthodontic retreatment of a 32-year-old female patient who suffered from premature loss of mandibular bilateral first molars. The mesial tipping of the mandibular second molars led to an occlusal interference, resulting in a clockwise rotation of the lower jaw and an anterior open bite (AOB). We achieved long-distance molar mesialization using clear aligners with Albert cantilever arms. After 42 months of treatment, the patient's occlusion and facial profile significantly improved. The cantilever combined with the cleat aligner treatment has been clinically effective for the protraction of mandibular posterior teeth, extending the field of application of clear aligners.
RESUMO
BACKGROUND: The World Health Organization considers malocclusion one of the most essential oral health problems. This disease influences various aspects of patients' health and well-being. Therefore, making it easier and more accurate to understand and diagnose patients with skeletal malocclusions is necessary. OBJECTIVES: The main aim of this research was the establishment of machine learning models to correctly classify individual Arab patients, being citizens of Israel, as skeletal class II or III. Secondary outcomes of the study included comparing cephalometric parameters between patients with skeletal class II and III and between age and gender-specific subgroups, an analysis of the correlation of various cephalometric variables, and principal component analysis in skeletal class diagnosis. METHODS: This quantitative, observational study is based on data from the Orthodontic Center, Jatt, Israel. The experimental data consisted of the coded records of 502 Arab patients diagnosed as Class II or III according to the Calculated_ANB. This parameter was defined as the difference between the measured ANB angle and the individualized ANB of Panagiotidis and Witt. In this observational study, we focused on the primary aim, i.e., the establishment of machine learning models for the correct classification of skeletal class II and III in a group of Arab orthodontic patients. For this purpose, various ML models and input data was tested after identifying the most relevant parameters by conducting a principal component analysis. As secondary outcomes this study compared the cephalometric parameters and analyzed their correlations between skeletal class II and III as well as between gender and age specific subgroups. RESULTS: Comparison of the two groups demonstrated significant differences between skeletal class II and class III patients. This was shown for the parameters NL-NSL angle, PFH/AFH ratio, SNA angle, SNB angle, SN-Ba angle. SN-Pg angle, and ML-NSL angle in skeletal class III patients, and for S-N (mm) in skeletal class II patients. In skeletal class II and skeletal class III patients, the results showed that the Calculated_ANB correlated well with many other cephalometric parameters. With the help of the Principal Component Analysis (PCA), it was possible to explain about 71% of the variation between the first two PCs. Finally, applying the stepwise forward Machine Learning models, it could be demonstrated that the model works only with the parameters Wits appraisal and SNB angle was able to predict the allocation of patients to either skeletal class II or III with an accuracy of 0.95, compared to a value of 0.99 when all parameters were used ("general model"). CONCLUSION: There is a significant relationship between many cephalometric parameters within the different groups of gender and age. This study highlights the high accuracy and power of Wits appraisal and the SNB angle in evaluating the classification of orthodontic malocclusion.
Assuntos
Árabes , Cefalometria , Aprendizado de Máquina , Má Oclusão Classe III de Angle , Má Oclusão Classe II de Angle , Humanos , Masculino , Feminino , Má Oclusão Classe II de Angle/patologia , Má Oclusão Classe II de Angle/diagnóstico por imagem , Adolescente , Má Oclusão Classe III de Angle/patologia , Análise de Componente Principal , Israel , Criança , AdultoRESUMO
Objectives: To determine age- and sex-related changes in mastoid air cells volume in orthodontic malocclusions (class 1, class 2, class 3) in cone beam computed tomography (CBCT), morphometric analysis, and age prediction on the basis of mastoid air cells. Methods: In total, 150 3D CBCT scans of study subjects having class 1, class 2, and class 3 malocclusions have been analyzed retrospectively for the estimation of volume of mastoid air cells by Dolphin imaging software V11.9, and measurement data of volumes have been recorded and analyzed using SPSS software 24.v. Results: The volume of mastoid air cells was highest in age group of 14-28 years which was statistically not significant (P value >.05). The volume of mastoid air cells in the right side of cranium is greater than mastoid air cells in the left side. The mastoid air cell volume was higher in males than females. The volume of mastoid air cells (right side) was highest in class II malocclusion (2404.53 ± 1737.50 mm3) followed by class III and was least in class I malocclusion (1842.09 ± 1263.78 mm3). However, the volume of mastoid air cells in the left side was highest in class III malocclusion (2368.03 ± 1853.00 mm3) followed by class II and was least in class I (1920.52 ± 1285.34 mm3). Conclusions: The volume of mastoid air cells varies in different class of orthodontic malocclusions. The mastoid air cells volume is higher in males than females. On the basis of mastoid air cells volume, we are able to predict the age, sex, and class of orthodontic malocclusion.
RESUMO
INTRODUCTION: En-masse maxillary anterior retraction is necessary to attain an esthetic profile in Angle's class I bimaxillary dentoalveolar protrusion and Angle's class II division 1 malocclusion. The objective of this study was to evaluate configurational relationships between maxillary incisors and incisive canal in Angle's class I bialveolar protrusion and Angle's class II division 1 malocclusion by cone-beam computed tomography (CBCT). METHODS: A total of 108 adult CBCT scans of 54-skeletal class I bialveolar protrusion and 54-skeletal class II division 1 malocclusions were retrospectively analyzed. Angles between palatal plane and axis of maxillary alveolar border (θ1), incisive canal (θ2), and maxillary right central incisor (θ3) were measured in relation to the midsagittal plane. Linear measurements such as incisive canal width (IC-IC), medial inter-root distance (Rm-Rm), posterior inter-root distance (Rp-Rp), anteroposterior distance from Rm to tangent of right central incisor (11 Rm-Cat), and left central incisor (21 Rm-Cat) corresponding to three vertical levels (L1, L2, and L3) were assessed in axial cross-sectional plane. Association among angular measurements was examined by Spearman correlation coefficient analysis. Mann-Whitney U test compared variables of linear measurements at three vertical levels. RESULTS: Estimated distance from incisor root to incisive canal was 5-6 mm in both groups slightly influenced by skeletal class and vertical levels but not gender. Mann-Whitney test demonstrated significant differences between groups at three vertical levels (p<0.05). Only θ2 revealed a significant difference (p<0.05) between malocclusions compared to θ1 and θ3. The angular measurements for both malocclusions were positively correlated (p<0.05). CONCLUSION: Sagittal root-canal cortical plate distance varied significantly in both malocclusions (5-6 mm). Inter-root distance (Rp-Rp) was greater than incisive canal width (IC-IC) at all three vertical levels indicating a reduced possibility of canal invasion after maximum retraction at posterior levels.
RESUMO
PURPOSE: Complications of bonded lingual retainers in terms of unexpected tooth movements have been reported with increasing frequency during the last decade, but the vast majority of the literature comprises case reports. The purpose of the present retrospective case-control study was to analyze the amount and direction of unwanted tooth movements despite lower bonded retainers, to analyze possible predisposing pretreatment- and treatment-related factors, and to seek for movement thresholds which could enhance the rapid and objective identification of critical cases. METHODS: Plaster casts of 1026 patients who completed orthodontic treatment and a subsequent retention phase of 2 years were screened for unintentional tooth movements. The study group comprised 39 patients with tooth movements in the lower jaw, while 39 randomly selected patients without visible tooth movements served as the control group. For all patients, plaster casts after debonding of multibracket appliances (T1) and after supervised retention (T2) were digitized, and a three-dimensional (3D) digital superimposition based on the best fit of premolars and molars was undertaken. Thereafter, translational as well as rotational movements were measured in all three planes of space. Pretreatment- and treatment-related factors of the study and control groups were compared. A severity classification based on rotational movement thresholds was applied to seek a critical amount of translational movements. RESULTS: The mean translational movements ranged between 0 and 0.4â¯mm and the average rotational movements between 0 and 1.6°. Large individual movements up to 1.9â¯mm translation and 16° rotation were seen. A twist-effect with opposite movements of the canines along the Yaxis could be confirmed. Compared to the control group, patients of the study group had a smaller intercanine distance at all timepoints. In addition, study group patients presented a slightly larger intercanine expansion during treatment and were more often affected by retainer bonding site detachments. Applying the severity classification based on rotational thresholds, translational movements of 0.5-1.0â¯mm along the X and Yaxis could serve as a critical threshold. It can be assumed that extrusive translational movements along the Zaxis seem to be of specific nature and perhaps do not reflect a retainer complication in terms of unwanted tooth movements. CONCLUSIONS: Patients with a larger intercanine distance after active treatment and those with more frequent retainer bonding site detachments could be at higher risk for unwanted tooth movements during fixed retention. Sagittal and transverse movements of 0.5-1.0â¯mm should sensitize the practitioner for further measures.
RESUMO
Class III malocclusion is a challenging dental and skeletal condition characterized by a protrusive mandible, retrusive maxilla, or a combination of both. Treatment options include growth modification, orthodontic camouflage, and orthognathic surgery. While surgery often provides definitive results for severe cases, orthodontic camouflage is a viable alternative for managing mild to moderate skeletal discrepancies in adults. This case report illustrates the successful use of orthodontic camouflage in a 19-year-old female with skeletal and dental class III malocclusion, emphasizing nonsurgical strategies to achieve functional and aesthetic improvements. The patient presented with concerns about her bite and facial profile. Clinical examination revealed a concave profile, prominent mandible, and class III molar and canine relationships with a negative overjet. The radiographic analysis confirmed a skeletal class III relationship (ANB angle of -2°) and normal vertical growth patterns. The chosen nonsurgical treatment plan involved fixed orthodontic appliances and class III intermaxillary elastics to correct the malocclusion and improve facial aesthetics. The treatment phases included initial alignment, class III elastic application to adjust the occlusion, and detailed finishing to refine results. After 20 months, the treatment resulted in a positive overjet, class I molar and canine relationships, and improved facial aesthetics with reduced mandibular prominence. The patient expressed satisfaction with both functional and aesthetic outcomes. This case demonstrates that orthodontic camouflage can effectively manage mild to moderate class III malocclusion in non-growing patients. Successful outcomes depend on precise treatment planning, patient compliance, and regular monitoring. While surgical options remain necessary for severe cases, orthodontic camouflage provides a less invasive alternative for suitable patients, significantly improving dental function and facial aesthetics.
RESUMO
This study aimed to assess the changes in interproximal contacts before and after orthodontic treatment using the OXIS classification. OXIS refers to the types of contacts that is open (O), point contact (X), straight contact (I), and curved contact (S), and thus the acronym "OXIS". Interproximal contact data of 30 orthodontic patients were obtained at three time points: T0, at the beginning of treatment; T1, at the end of fixed appliance treatment; and T2, one-year post-treatment. For the maxillary second molar-first molar contact, the most common contact at T0, was the "S" pattern (41.6%) which increased to 61.6% at T1 and reduced to 48.3% at T2. For the maxillary first molar-second premolar contact, maxillary second premolar-first premolar contact, and maxillary first premolar-canine contact, the most common contact at T0 was the "I" pattern (58.3%, 46.5% and 43.3%, respectively), which increased to 88.3%, 93.3% and 73.3%, respectively at T1 and decreased to 80%, 88.3% and 71.6%, respectively at T2. For the maxillary canine-lateral incisor contact and lateral-central incisor contact, the most common contact at T0 was the "O" pattern (45% and 33.3%) while it was the "X" pattern at T1 (63.3% and 80%) and T2 (58.3% and 80%). A similar observation was made for the posterior mandibular and anterior teeth. There was statistical significance for most of the changes in the mandibular contacts (p Ë 0.05). Interproximal contacts change significantly from T0 to T1. Broader contacts were normal at T1 and T2 in the posterior segments. At T2, changes in the interproximal contacts were observed in the posterior segments, and substantial evidence was available, particularly for the mandibular arch.
Assuntos
Oclusão Dentária , Humanos , Feminino , Masculino , Criança , Adolescente , Ortodontia Corretiva/instrumentação , Ortodontia Corretiva/métodos , Má Oclusão/terapiaRESUMO
BACKGROUND: Bilateral posterior crossbite (BPXB) is a severe malocclusion associated with maxillary hypoplasia. BPXB may involve the same or a different number of teeth between the sides. OBJECTIVES: To evaluate the masticatory function in BPXB and the association between the masticatory alterations and the occlusal features of BPXB. METHODS: This observational study included 170 participants: 130 patients with BPXB (65 occlusally symmetric BPXB, i.e. same number and type of posterior teeth in crossbite between the sides, F = 33, M = 32, median age 9.6 (8.2-13) [years.months]; 65 patients occlusally asymmetric BPXB, F = 30, M = 35, median age 9.9 (8.3-13.6)) and 40 controls (F = 25, M = 15, median age 10.2 (9.4-11.6)). The masticatory function was evaluated by the detection of the Reverse Chewing Cycles (RCCs) recorded with a kinesiograph using standardised soft and hard boluses. RESULTS: The frequency of RCCs was significantly increased in all BPXB patients compared to controls (p < .000). In symmetric BPXB patients, there were no significant differences in the frequency of RCCs during chewing on the left or the right side. In asymmetric BPXB patients, the frequency of RCCs was significantly increased during chewing on the side with relatively more teeth in crossbite (p < .000). CONCLUSIONS: The masticatory function was significantly altered in all BPXB patients and it was differently affected by symmetric or asymmetric occlusal features of the malocclusion.
RESUMO
OBJECTIVE: The aim of this study was to evaluate changes in shape of the palatal vault after maxillary expansion with hyrax expander (HE) and leaf expander (LE), using 3D Geometric Morphometric Analysis. SETTING AND SAMPLE POPULATION: Overall, 250 patients (110 M, 140 F) with maxillary transverse deficiency were selected for this study. In this study, 127 subjects were treated with HE, 123 with LE. MATERIALS AND METHODS: Digital dental models were obtained pre-treatment (T0) and after 12 months from the cementation of the device (T1) and processed by means of a digital scanner. Linear and morphometric analyses were conducted to determine the effects of each appliance on dental measurements and palatal shape, and a multiple linear regression was performed to analyse the influence of anchorage and appliance type on final shape. RESULTS: Morphometric analysis showed that there was a lowering of the palatal vault in the HE group, while in the LE group it remained unchanged: the difference in palatal shape at time T0 and T1 was statistically significant in both treatments (HE vs. LE). In the HE group, the change in shape also included the upper part of the palatal vault in the vertical dimension, while in the LE group the change in shape interested mainly palatal shelves and the lower portion of the palate. CONCLUSIONS: Both LE and HE produce clinically significant changes in the morphology of the palatal vault.
RESUMO
PURPOSE: Adverse side effects of fixed retainers in terms of unwanted tooth movements have been described for both the upper and lower jaw, but data about the extent and movement patterns for the maxilla are scarce. The purpose of the present retrospective case-control study was to analyze the amount and direction of unwanted tooth movements despite upper bonded retainers as well as to analyze possible predisposing pretreatment- and treatment-related factors. METHODS: Plaster casts of 1026 patients who completed orthodontic treatment and a subsequent retention phase of 2 years were screened for unintentional tooth movements. The study group comprised 57 patients with visually obvious tooth movements in the upper jaw, while 57 randomly selected patients without visible tooth movements served as control group. For all patients, plaster casts after debonding of multibracket appliance (T1) and after supervised retention (T2) were digitized, and superimposed digitally using a stable palatal reference area. Thereafter, translational and rotational movements were measured in all three planes of space. Pretreatment- and treatment-related factors of the study and control groups were compared by χ2 test, exact Fisher test, Mann-Whitney U test, and the Ttest for independent samples. RESULTS: The mean translational movements ranged between 0 and 0.6â¯mm and the average rotational movements between 0 and 1.3°. Large individual movements up to 2.7â¯mm translation and 15.9° rotation were seen. A movement pattern around the Y and Zaxis with an opposite rotational peak at the canines ("upper twist effect") was identified. Compared to the control group, patients of the study group showed a significantly smaller intercanine width pretreatment. Also, study group patients presented a larger intercanine expansion and a slightly larger overjet reduction during treatment, and were more often affected by retainer bonding site detachments and wire fractures, but without reaching statistically significance. CONCLUSION: Upper bonded retainers show a similar unwanted movement pattern ("twist effect") like the one described for mandibular retainers.
RESUMO
Class II malocclusion is a recurrent problem that may occur at a young age. If treated initially, the malocclusion can be corrected by redirecting the growth without invasive modalities and avoiding orthognathic surgeries. A female patient aged 10 years three months came to the department of orthodontics having a complaint of upper front teeth placed forwardly, diagnosed with skeletal class II due to retrusive mandible and vertical maxillary excess with hyper divergent growth pattern with increased anterior facial height, with Angle's molar class II division 1 malocclusion, increased overjet of 13 mm and overbite of 7 mm, acute nasolabial angle, deep mentolabial sulcus, and hyperactive mentalis. It was treated using an activator with medium-high-pull headgear (modified Herren activator) passing through the maxillary center of resistance. A fixed mechanotherapy with high-pull headgear was given using the anterior inclined plane acrylic plate in the maxilla and McLaughlin, Bennett, and Trevisi (MBT). Begg's wrap was used for the retention plan. This case report shows the significance of proper treatment results obtained due to correct identification and planning in treating malocclusion. This case report shows the significance of proper treatment results obtained due to correct identification and planning in treating malocclusion.
RESUMO
Malocclusion is defined as any deviation from the ideal occlusal positions and the position of the specific teeth. Those that are common are numerous and affect a patient's stomatology and dental structures in appearance and utility. Class I is the most common type and favors the anterior relationship of both jaws, which lies between the second and third quartiles. Its cause is still unknown at the moment. It is even more frequent than usual occlusion. Class I malocclusion with an overjet of upper incisors less than 4 mm accompanied by type 2 of Dewey's modification also displays protruded upper incisors and a deep overbite. This case report's focus is to provide an extensive evaluation of the diagnostic process, management plan, and outcome for a patient who had presented with this specific dental abnormality and simultaneous intrusion and retraction mechanics for an anterior segment with Kalra Simultaneous Intrusion and Retraction (K-SIR) loops.
RESUMO
BACKGROUND/RATIONALE: Systematic reviews on the effects of pacifiers on occlusion have highlighted the need for quality RCTs. TRIAL DESIGN: Single region, three parallel-armed, prospective, randomized controlled trial. OBJECTIVES: To investigate the correlations between early childhood non-nutritive sucking habits and malocclusion. Specifically to test whether the use of a study pacifier has differing effects compared to other pacifiers and control, and whether the duration of pacifier use or digit sucking influence the occlusion. PARTICIPANTS: The subjects were firstborn children, born in 2008 in Vantaa, Finland. INTERVENTION: One-third of participants were offered study pacifiers, free of charge, from birth up to 2 years of age. The history of the subjects' sucking habits, including pacifier use was screened in a questionnaire at the age of 2 years, and clinical examinations were performed at the age of 7 years. In addition, the subjects were divided into groups that were equally matched regarding their mother's level of education. OUTCOMES: Posterior crossbite, anterior crossbite, overjet, deep bite, open bite, and crowding. RANDOMIZATION METHOD: Three districts were randomly allocated to three study groups by drawing lots. BLINDING: It was not possible to blind the clinicians or parents from the intervention. Blinding during data analysis was performed. RESULTS: From the original cohort of 2715 children born in the town of Vantaa, 1911 were excluded and 353 were lost to follow-up. The remaining 451 children were divided into three groups according to the use of pacifiers. The prevalence of posterior crossbite at the age of 7 years was higher if a non-study pacifier had been used (Pâ =â .005) even when matched for the mother's level of education (Pâ =â .029). The prevalence of posterior crossbite was higher if the pacifier habit had continued for 12 months or more compared to 11 months or less, 7% and 1%, respectively, (Pâ =â .003). Digit sucking for 12 months or more was associated with crowding (Pâ =â .016). The prevalence of crossbite in the study pacifier group was less than in control pacifiers. HARMS: No adverse harms were reported other than effects on the dentition. CONCLUSION: The use of pacifiers is associated with the posterior crossbite, especially if their use continues for a year or more. Parents/guardians should be advised to stop the use or reduce the use of pacifiers to a minimum after their child's first birthday. TRIAL REGISTRATION: ClinicalTrials.gov NCT01854502.
Assuntos
Sucção de Dedo , Má Oclusão , Chupetas , Comportamento de Sucção , Humanos , Chupetas/efeitos adversos , Feminino , Masculino , Sucção de Dedo/efeitos adversos , Lactente , Estudos Prospectivos , Pré-Escolar , Criança , Mordida Aberta/etiologia , Finlândia , Fatores de TempoRESUMO
Mandibular continuity defects can result in varying degrees of cosmetic disfigurement. Restoration of form and function may require surgical reconstruction of the affected area. While surgical reconstruction may improve the overall prognostic outcomes for the patient, the definitive prosthetic phase can commence only after a substantial time lag for adequate hard/soft tissue healing. This interim phase often challenges the patient's masticatory ability. The traditional reconstruction of hemimandibulectomy defects has its own limitations. This case report describes the fabrication of a 3D-printed bite splint for a patient with limited mouth opening and significant malocclusion due to surgical over-correction. The prosthesis given served as an appliance to improve the masticatory ability of the patient.
RESUMO
Background: Skeletal malocclusion is common among populations. Its severity often increases during adolescence, yet it is frequently overlooked. The introduction of deep learning in stomatology has opened a new avenue for self-health management. Methods: In this study, networks were trained using lateral photographs of 2109 newly diagnosed patients. The performance of the models was thoroughly evaluated using various metrics, such as sensitivity, specificity, accuracy, confusion matrix analysis, the receiver operating characteristic curve, and the area under the curve value. Heat maps were generated to further interpret the models' decisions. A comparative analysis was performed to assess the proposed models against the expert judgment of orthodontic specialists. Results: The modified models reached an impressive average accuracy of 84.50% (78.73%-88.87%), with both sex and developmental stage information contributing to the AI system's enhanced performance. The heat maps effectively highlighted the distinct characteristics of skeletal class II and III malocclusion in specific regions. In contrast, the specialist achieved a mean accuracy of 71.89% (65.25%-77.64%). Conclusions: Deep learning appears to be a promising tool for assisting in the screening of skeletal malocclusion. It provides valuable insights for expanding the use of AI in self-monitoring and early detection within a family environment.
Assuntos
Má Oclusão , Humanos , Feminino , Má Oclusão/diagnóstico , Masculino , Adolescente , Aprendizado Profundo , Inteligência Artificial/tendências , Curva ROC , CriançaRESUMO
Our study aimed to evaluate a stepwise treatment of class III malocclusion accompanied with flat nasal deformity, using orthodontics, orthognathic surgery, and rhinoplasty, as well as stability during long-term follow-up. In total, 27 patients with nasomaxillary hypoplasia and skeletal class III malocclusion were enrolled in this study. All patients had accepted orthodontic and orthognathic surgery, followed by rhinoplasty with costal cartilage as the second surgical procedure. Clinical results were evaluated by radiography, medical photography, questionnaire, and cephalometric analysis. All patients were satisfied with the surgical results and no serious complications occurred. During the follow-up, the patients showed well-corrected midface contour and nasal projection, and stable occlusion. The costal cartilage grafts were well fixed, without obvious absorption deformation. Lateral cephalometric analysis and overlay results showed that the postoperative point A had advanced approximately 5.20 ± 1.43 mm and the SNA angle had increased by approximately 5.59 ± 2.86°. Soft-tissue measurements showed a 14.22 ± 6.56° decrease in the facial lobe, while the nasolabial angle had increased by 16.83 ± 6.65° postoperatively. The results suggested that stepwise orthodontic-orthognathic surgery and rhinoplasty produce a predictable and stable result in long-term follow-up.
RESUMO
Malocclusion refers to the departure from the normal relationship of teeth to other teeth in the same and opposing arch. It can negatively impact on facial appearance and the quality of life of a person. The present study aimed to investigate the influence of malocclusion on the role of priests as counsellors and preachers in Nigeria as perceived by church members. This was a cross-sectional survey of 112 church members who completed an electronic questionnaire. Thirty-five (31.3%) participants said unattractive dental appearance (malocclusion) will impact negatively on their acceptance of the priest's gospel message. Twenty-seven (24.1%) said dental appearance will influence the choice of priest that they go to for counselling while 71 (63.4%) said it will not. The study found that though unattractive teeth arrangement did not significantly affect the priest's duties as it pertains to sermons and counselling, awareness on the importance of orthodontic care among the clergy is necessary and should be encouraged among all spiritual leaders.