Microbial Electrochemically Assisted Treatment Wetlands: Current Flow Density as a Performance Indicator in Real-Scale Systems in Mediterranean and Northern European Locations.

A METland is an innovative treatment wetland (TW) that relies on the stimulation of electroactive bacteria (EAB) to enhance the degradation of pollutants. The METland is designed in a short-circuit mode (in the absence of an external circuit) using an electroconductive bed capable of accepting electrons from the microbial metabolism of pollutants. Although METlands are proven to be highly efficient in removing organic pollutants, the study of in situ EAB activity in full-scale systems is a challenge due to the absence of a two-electrode configuration. For the first time, four independent full-scale METland systems were tested for the removal of organic pollutants and nutrients, establishing a correlation with the electroactive response generated by the presence of EAB. The removal efficiency of the systems was enhanced by plants and mixed oxic-anoxic conditions, with an average removal of 56 g of chemical oxygen demand (COD) mbed material -3 day-1 and 2 g of total nitrogen (TN) mbed material -3 day-1 for Ørby 2 (partially saturated system). The estimated electron current density (J) provides evidence of the presence of EAB and its relationship with the removal of organic matter. The tested METland systems reached the max. values of 188.14 mA m-2 (planted system; IMDEA 1), 223.84 mA m-2 (non-planted system; IMDEA 2), 125.96 mA m-2 (full saturated system; Ørby 1), and 123.01 mA m-2 (partially saturated system; Ørby 2). These electron flow values were remarkable for systems that were not designed for energy harvesting and unequivocally show how electrons circulate even in the absence of a two-electrode system. The relation between organic load rate (OLR) at the inlet and coulombic efficiency (CE; %) showed a decreasing trend, with values ranging from 8.8 to 53% (OLR from 2.0 to 16.4 g COD m-2 day-1) for IMDEA systems and from 0.8 to 2.5% (OLR from 41.9 to 45.6 g COD m-2 day-1) for Ørby systems. This pattern denotes that the treatment of complex mixtures such as real wastewater with high and variable OLR should not necessarily result in high CE values. METland technology was validated as an innovative and efficient solution for treating wastewater for decentralized locations.

Multi-Criteria Evaluation and Sensitivity Analysis for the Optimal Location of Constructed Wetlands (METland) at Oceanic and Mediterranean Areas.

METland is a new variety of Constructed Wetland (CW) for treating wastewater where gravel is replaced by a biocompatible electroconductive material to stimulate the metabolism of electroactive bacteria. The system requires a remarkably low land footprint (0.4 m2/pe) compared to conventional CW, due to the high pollutant removal rate exhibited by such microorganisms. In order to predict the optimal locations for METland, a methodology based on Multi-Criteria Evaluation (MCE) techniques applied to Geographical Information Systems (GIS) has been proposed. Seven criteria were evaluated and weighted in the context of Analytical Hierarchy Process (AHP). Finally, a Global Sensitivity Analysis (GSA) was performed using the Sobol method for resource optimization. The model was tested in two locations, oceanic and Mediterranean, to prove its feasibility in different geographical, demographic and climate conditions. The GSA revealed as conclusion the most influential factors in the model: (i) land use, (ii) distance to population centers, and (iii) distance to river beds. Interestingly, the model could predict best suitable locations by reducing the number of analyzed factors to just such three key factors (responsible for 78% of the output variance). The proposed methodology will help decision-making stakeholders in implementing nature-based solutions, including constructed wetlands, for treating wastewater in rural areas.

Assessing METland® Design and Performance Through LCA: Techno-Environmental Study With Multifunctional Unit Perspective.

Conventional wastewater treatment technologies are costly and energy demanding; such issues are especially remarkable when small communities have to clean up their pollutants. In response to these requirements, a new variety of nature-based solution, so-called METland®, has been recently develop by using concepts from Microbial Electrochemical Technologies (MET) to outperform classical constructed wetland regarding wastewater treatment. Thus, the current study evaluates two operation modes (aerobic and aerobic-anoxic) of a full-scale METland®, including a Life Cycle Assessment (LCA) conducted under a Net Environmental Balance perspective. Moreover, a combined technical and environmental analysis using a Net Eutrophication Balance (NEuB) focus concluded that the downflow (aerobic) mode achieved the highest removal rates for both organic pollutant and nitrogen, and it was revealed as the most environmentally friendly design. Actually, aerobic configuration outperformed anaero/aero-mixed mode in a fold-range from 9 to 30%. LCA was indeed recalculated under diverse Functional Units (FU) to determine the influence of each FU in the impacts. Furthermore, in comparison with constructed wetland, METland® showed a remarkable increase in wastewater treatment capacity per surface area (0.6 m2/pe) without using external energy. Specifically, these results suggest that aerobic-anoxic configuration could be more environmentally friendly under specific situations where high N removal is required. The removal rates achieved demonstrated a robust adaptation to influent variations, revealing a removal average of 92% of Biology Oxygen Demand (BOD), 90% of Total Suspended Solids (TSS), 40% of total nitrogen (TN), and 30% of total phosphorus (TP). Moreover, regarding the global warming category, the overall impact was 75% lower compared to other conventional treatments like activated sludge. In conclusion, the LCA revealed that METland® appears as ideal solution for rural areas, considering the low energy requirements and high efficiency to remove organic pollutants, nitrogen, and phosphates from urban wastewater.

Novel bioelectrochemical strategies for domesticating the electron flow in constructed wetlands.

Constructed wetlands are an effective biofilter-based technology for treating wastewater in a sustainable way; however, their main disadvantage is a large area footprint. To cope with this limitation a new generation of constructed wetlands, the METlands®, have been recently reported. METlands® replace gravel with a granular electrically conductive material to enhance the oxidative metabolisms of electroactive bacteria by facilitating the flux of electron through the material and, consequently, increase bioremediation rates. In this work we evaluated the performance of a new electron sink (e-sink) device with the purpose of controlling and enhancing the electrochemical consumption of electrons from microbial metabolism without energy consumption. The e-sink device was integrated inside the biofilter bed and was tested using different electron acceptors with high redox potentials, like oxygen and hypochlorite. Interestingly, the presence of the e-sink allowed novel redox gradients to form inside the METland® and, consequently, a new electron flow was demonstrated by measuring both the electric potential and current density profiles of the bed. Three independent biofilters were constructed and operated under flooded conditions. Ec-coke and electroconductive biochar (ec-biochar) were used as electrically conductive bed materials, while gravel was used as an inert control. Furthermore, e-sink integration inside the electrically conductive bed outperformed METlands® for removing pollutants, already much more efficient than standard gravel biofilters. COD removal was increased from 90% in METland® to 95% in the e-sink METland® as compared to 75% for the control, while total nitrogen removal was enhanced from 64% in METland® to 71% in e-sink METland® as compared to 55% for the control. Our results indicate that increasing the electrochemical availability of electron acceptors by using the e-sink will be a suitable method for controlling the electron flow inside the filter bed and can be integrated in full scale METlands® for achieving high removal rates.

Community level physiological profiling of microbial electrochemical-based constructed wetlands.

The performance of constructed wetlands (CW) can be enhanced through the use of microbial electrochemical technologies like METland systems. Given its novelty, uncertainties exist regarding processes responsible for the pollutant removal and microbial activity within the systems. Genetic characterization of microbial communities of METlands is desirable, but it is a time and resource consuming. An alternative, is the functional analysis based on community-level physiological profile (CLPP), which allows to evaluate the diversity of microbial communities based on the carbon consumption patterns and derived indexes (average well color development - AWCD -, richness, and diversity). This study aimed to characterize the microbial community function of laboratory-scale METlands using the CLPP method. It encompassed the analysis of planted and non-planted set-ups of two carbon-based electroconductive materials (Coke-A and Coke-LSN) colonized with electroactive biofilms, and compared to Sand-filled columns. Variations in the microbial metabolic activity were found to depend on the characteristics of the material rather than to the presence of plants. Coke-A systems showed lower values of AWCD, richness, and diversity than Sand and Coke-LSN systems. This suggests that Coke-A systems provided more favorable conditions for the development of relatively homogeneous microbial biofilms. Additionally, typical parameters of water quality were measured and correlations between utilization of carbon sources and removal of pollutants were established. The results provide useful insight into the spatial dynamics of the microbial activity of METland systems.