Advancing Bioactive Material for Mandibular Bone Regeneration: Transformation of Fibrous Mat into 3D Matrix Cotton for Enhanced Shape Retention and Rapid Hemostasis.

Transformation of a fibrous mat into a three-dimensional (3D) scaffold opens up abundant innovative prospects in biomedical research, particularly for studying both soft as well as hard tissues. Electrospun nanofibers, which mimic the extracellular matrix have attracted significant attention in various studies. This research focuses on rapidly converting a fibrous mat made of polycaprolactone (PCL)/pluronic F-127 (PF-127) with different percentages of monetite calcium phosphate (MCP) into desirable 3D matrix cotton using a unique gas foaming technology. These matrix cottons possess biomimetic properties and have oriented porous structures. Using this innovative technique, various shapes of 3D matrix cotton, such as squares, hollow tubes, and other customizable forms, were successfully produced. Importantly, these 3D matrix cottons showed a consistent distribution of monetite particles with total porosity ranging from 90% to 98%. The structure of the 3D matrix cotton, its water/blood absorption capacity, the potential for causing non-hemolysis, and rapid hemostatic properties were thoroughly investigated. Additionally, periodontal cells were cultured on the 3D matrix cotton to assess their viability and morphology, revealing promising results. Furthermore, a coculture study involving NIH-3T3 and MG-63 cells on the 3D matrix cotton showed spheroidal formation within 24 h. Notably, in vitro assessments indicated that the matrix cotton containing 15% monetite (PCL-MMC15%) exhibited superior absorbent capabilities, excellent cell viability, and rapid hemostatic characteristics. Subsequently, the effectiveness of PCL-MMC15% in promoting mandibular bone regeneration was evaluated through an in vivo study on rabbits using a mandibular injury model. The results demonstrated that PCL-MMC15% facilitated the resolution of defects in the mandibular region by initiating new bone formation. Therefore, the presented 3D matrix cotton (PCL-MMC15%) shows significant promise for applications in both mandibular bone regeneration and hemostasis.

In vitro biotransformation of 3-methylmethcathinone (3-MMC) through incubation with human liver microsomes and cytosol and application to in vivo samples.

Synthetic cathinones are the second largest group of new psychoactive substances (NPS) monitored by the European Monitoring Centre for Drugs and Drug Addiction. Although 3-methylmethcathinone (3-MMC, C11H15NO) is legally banned in many countries, it is readily available for purchase online and on the street. Due to the scarcity of information regarding the pharmacokinetic and toxicological profile of 3-MMC, understanding its biotransformation pathways is crucial in determining its potential toxicity in humans and in the development of analytical methods for screening of human matrices. To gain more insight, Phase I and Phase II in vitro biotransformation of 3-MMC was investigated using human liver microsomes and human liver cytosol. Suspect and non-target screening approaches were employed to identify metabolites. To confirm in vitro results in an in vivo setting, human matrices (i.e., plasma, urine, saliva and hair) positive for 3-MMC (n=31) were screened. In total three biotransformation products were identified in vitro: C11H15NO2 (a hydroxylated derivate), C11H17NO (a keto-reduced derivate) and C10H13NO (an N-desmethyl derivate). All three were confirmed as human metabolites in respectively 16 %, 52 % and 42 % of the analysed human samples. In total, 61 % of the analysed samples were positive for at least one of the three metabolites. Interestingly, three urine samples were positive for all three metabolites. The presence of 3-MMC in saliva and hair indicates its potential applicability in specific settings, e.g., roadside testing or chronic consumption analysis. To our knowledge, C11H17NO was not detected before in vivo. Although some of these metabolites have been previously suggested in vitro or in a single post mortem case report, a wide in vivo confirmation including the screening of four different human matrices was performed for the first time. These metabolites could serve as potential human biomarkers to monitor human 3-MMC consumption effectively.

Mephedrone concentrations in clinical intoxications and fatal cases: a systematic review.

BACKGROUND/PURPOSE: Mephedrone, a ring-substituted synthetic cathinone derivative, gained popularity as a recreational drug in the late 2000s. Reports of fatalities related to mephedrone use have emerged with varying concentrations of blood mephedrone upon forensic investigations. This study aims to evaluate the existing literature on mephedrone concentrations in instances of clinical intoxication and fatal cases. METHODS: We comprehensively searched electronic databases, including Web of Science, PubMed, Embase, and the Cochrane Library, from inception to July 26, 2023. We selected case reports or case series of mephedrone intoxication presented with individual blood mephedrone concentration. Patient demographics, clinical characteristics, blood mephedrone concentrations, and outcomes were extracted for analysis. RESULTS: 77 cases from 14 case reports and 6 case series were identified for review. There were 34 deaths and 43 non-fatal intoxication cases. The median patient's age was 24 years (IQR: 10), and 91.4% were male. Forty-five of the 63 cases (71.4%) were reported with alcohol or other illicit drugs detected. The median blood mephedrone concentration was 0.37 mg/L (IQR: 1.09 mg/L). Death cases were older than non-fatal cases (median = 30 vs. 22 years, p = 0.029). The median blood mephedrone concentration was higher in death cases (1.30 mg/L vs. 0.12 mg/L, p < 0.0001). CONCLUSIONS: Blood mephedrone concentration in dead patients is approximately 11 times higher than in non-fatal cases. This finding could serve as a stepping stone to the diagnosis of concentrations in clinical poisoning cases and deaths, especially in the treatment of poisoning patients. In more extensive prospective studies, further research is necessary to establish a standardized, real-time available methodology and validate the predictive value of mephedrone concentrations in the prognostic value of mephedrone concentrations.

Impact of dual procedures: How combining VP shunt placement for hydrocephalus and myelomeningocele repair in newborns affects complication rates?

To discern the efficacy of simultaneous versus delayed VPS surgery in managing hydrocephalus linked with MMC repair: The debate over the concurrent or deferred placement of ventriculoperitoneal shunts (VPS) during myelomeningocele (MMC) repair in hydrocephalic neonates necessitates a nuanced evaluation of associated risks and benefits. While VPS placement can mitigate cerebrospinal fluid (CSF) leaks and minimize wound dehiscence post-MMC repair, it concurrently introduces potential hazards such as infections and shunt-related malfunctions. This prospective cohort study focused on144 newborns with spinal myelomeningocele and hydrocephalus. Divided into two groups based on the timing of dysraphism repair and VPS placement, 101 children underwent concurrent procedures, while 43 received deferred VPS insertion post-MMC closure. Female patients constituted 60% of the cohort, with lumbar lesions being predominant. The median age for MMC closure was three days. Analysis revealed that the deferred insertion group exhibited higher rates of shunt malfunctions, CSF leaks, and wound dehiscence compared to the concurrent insertion group. Although indications hinted at a potential increase in shunt infections in the immediate insertion group, statistical significance was lacking. The study established a statistically significant association between the timing of shunt insertion during MMC repair and specific outcomes, such as CSF leaks and wound dehiscence. The findings suggest that concurrent shunt insertion during MMC repair may reduce the incidence of these complications compared to deferred insertion. However, no substantial differences emerged in terms of shunt infection and malfunction, emphasizing the persistent challenges associated with these major complications.

Safety and oncological outcome of early intraoperative intravesicle mitomycin C vs. deferred instillation in patients receiving robot-assisted radical nephroureterectomy.

Introduction: Radical nephroureterectomy with concurrent bladder cuff excision (RNUBCE) is the gold standard surgical approach for high-risk primary upper tract urothelial carcinoma (UTUC). Given the notably high incidence of bladder tumor recurrence following this procedure, this study aimed to evaluate the effect and safety of intraoperative mitomycin-C (MMC) instillation vs. deferred instillation on overall oncological outcomes following robot-assisted RNUBCE. Methods: This is a retrospective chart review study. Patients with non-invasive (N0, not T3/T4) UTUC who underwent robotic RNUBCE combined an intraoperative MMC instillation or a deferred MMC instillation after surgery at a medical center in Taiwan between November 2013 and June 2020 were eligible for inclusion. Patients with prior bladder UC, carcinomas of other origins, received neoadjuvant chemotherapy, and had undergone kidney transplantation were excluded. All surgeries were executed by a single surgical team under the guidance of the same surgeon. The primary outcomes was the risk of bladder tumor recurrence between patients received intraoperative (IO) vs. deferred MMC instillation postoperatively (PO) during one-year follow-up. The secondary outcome was postoperative adverse events assessed by the Clavien-Dindo classification. Univariate and multivariable Cox regression analyses were performed to determine the associations between study variables and the outcomes. Results: A total of 54 patients were included in the analysis. 12 (22.2%) patients experienced a bladder tumor recurrence during follow-up (IO: 7.7%, PO: 35.7%, p < 0.021). After adjustment in the multivariable, intraoperative MMC instillation was significantly associated with lower risk of bladder recurrence [adjusted hazard ratio (aHR) = 0.15, 95% CI: 0.03-0.81, p = 0.028]. No MMC-related Clavien-Dindo Grade III-IV adverse events were found in either group. Conclusion: IIntraoperative MMC instillation is safe and associated with a lower bladder tumor recurrence risk in patients undergoing robotic RNUBCE for UTUC than deferred instillation. Future large, prospective studies are still warranted to confirm the findings.

Pigtail with self-retaining bicanalicular intubation combined with Mitomycin C for the treatment of acquired lower punctal stenosis.

BACKGROUND: The pigtail was used to create an opening at the lower punctal site in grade 0 stenosis with insertion of self-retaining tube and Mitomycin C (MMC). METHODS: The patients with acquired lower punctal stenosis (grade 0) were divided randomly into equal groups, Group A: were treated with pigtail and MMC 0.02% and Group B: were treated with pigtail alone. The pigtail was inserted through the upper punctum until its tip reached the occluded punctum, this site was incised with a scalpel (No. 11). A self-retaining bicanalicular tube was then placed. RESULTS: Results of 36 eyes from 26 patients were included. No differences were observed between both groups regarding epiphora score, FDD test and punctal size preoperatively. The postoperative epiphora score, there were significant differences at 1 month (P = 0.035), 3 months (P = 0.005), and 6 months after removal (P < 0.001). The FDD test, there were significant differences at 6 months (P = 0.045), 1 month (P = 0.021), 3 months (P = 0.012), and 6 months post tube removal (P = 0.005). The punctal size, both groups differed at 1 month (P = 0.045), 3 months (P = 0.03), and 6 months post tube removal (P = 0.005). Only one case (5.5%) at each group showed extrusion of the tube. CONCLUSION: The pigtail probe, bicanalicular stent and MMC can be an effective method in treatment of severe punctal stenosis.

Development and Validation of the High-Voltage Direct-Current Modular Multilevel Converter (HVDC-MMC) Model for Converter Transformer Protection Studies.

The electrical protection of power networks with fault contribution from inverter-based power sources imposes new application challenges that have to be dealt with by protection engineers. This paper describes the development of a study case model of an HVDC-MMC link for testing the protection behaviour of connected converter transformers. The paper summarises the implementation and validation of the converter control as well as enhancements to provide Fault Ride-Through capability and fast fault current injection as required by the German Technical Connection Rules for HVDC. The grid code standard requires positive- and negative-sequence reactive current injection in the case of grid faults. A Doubled Decoupled Synchronous Reference Frame Phase Locked Loop (DDSRF-PLL) for Vector Current Control (VCC) is implemented. Additionally, a Fault Detection and Fault Ride-Through Reference Generator with a Current Limitation strategy is introduced. Though these techniques are well described in the literature, the DDSRF is improved for current control stability. The relationship between the parameters of the PLL and the control, as well as the behaviour of the protection system, are demonstrated. Grid faults with large voltage dips pose a significant challenge to the stability of the control system. Nevertheless, it is shown that with the developed model, it is possible to make general statements about the protection behaviour in an inverter-based environment.

Enhancing high-efficiency breeding and microbial microdroplet cultivation techniques for Ganoderma lucidum.

Ganoderma lucidum is known for its bioactive compounds, such as polysaccharides and triterpenoids, which are crucial in food and medicine. However, liquid fermentation encounters challenges in terms of strain differentiation and stability. In this research, we employed atmospheric room temperature plasma mutation and a microbial microdroplet culture system to identify strains with enhanced biomass and triterpenoid production. The three mutant strains, YB05, YB09, and YB18, exhibited accelerated growth rates and antagonized the initial strain G0023 more effectively than the controls. Notably, YB18 displayed the fastest growth, with a 17.25% increase in colony radius. Shake flask cultivation demonstrated that, compared with the initial strain, YB05 and YB18 had 26.33% and 17.85% greater biomass, respectively. Moreover, the triterpenoid production of YB05 and YB18 surpassed that of the control by 32.10% and 15.72%, respectively, as confirmed by colorimetric detection. Importantly, these mutant strains remained stable for five generations. This study revealed a comprehensive screening system utilizing atmospheric pressure, room temperature plasma mutation technology and microbial droplet cultivation. This innovative approach offers a promising pathway for obtaining advantageous Ganoderma strains for liquid fermentation. The methodology of atmospheric room temperature plasma mutation and microbial microdroplet culture systems is detailed for better comprehension.

Study on Plastic Constitutive Relation and Ductile Fracture Criterion of AM60B Magnesium Alloy.

It is currently a challenge to accurately predict the deformation and fracture behavior of metal parts in automobile crashes. Many studies have shown that the deformation and fracture behavior of materials are significantly affected by the stress state during automobile crashes with complex stress state characteristics. In order to further promote the application of die-cast magnesium alloys in automobiles, it is particularly important to study the material deformation and fracture behavior of die-cast magnesium alloys. In this paper, the mechanical properties of the AM60B die-cast magnesium alloy sheet under four stress states (shear, tension, R10 notch tension, and cupping) were designed and tested. Based on the von Mises isotropic constitutive model and Swift weighted Hockett-Sherby hardening model, the plastic constitutive model of die-cast magnesium alloy was established. Based on the plastic model and the fracture model (JC, MMC, and DIEM) considering the influence of three stress states, the deformation and fracture behavior of the AM60B die-cast magnesium alloy front-end members in three-point bending were predicted by experiments and finite element simulation. The experimental results show that the deformation mode and loading-displacement curve trend of the AM60B die-cast magnesium alloy front members are the same, the crack initiation point and crack initiation time are the same, and the crack shape is similar. The results show that the complex stress state constitutive model parameters and the DIEM fracture model obtained in this paper can accurately predict the deformation and fracture failure behavior of the AM60B die-cast magnesium alloy sheet.

Enrichment strategy and initial characterization of heterodimers enriched from a co-formulated cocktail of therapeutic antibodies against SARS-COV-2.

Co-formulation of multiple drug products is an efficient and convenient approach to simultaneously deliver multiple biotherapeutics with the potentially added benefit of a synergistic therapeutic effect. However, co-formulation also increases the risk of heteromeric interactions, giving rise to unique impurities with unknown efficacy and immunogenicity. Therefore, it is critical to develop methods to evaluate the risk of heteromers as an impurity that could affect potency, efficacy, and/or immunogenicity. The most direct strategy to evaluate antibody heteromers is via specific enrichment. However, the fact that antibody heterodimers generated from the co-formulated cocktail share highly similar molar mass and size properties as homodimers natively present in each individual antibody drug product poses a unique purification challenge. Here, we report the path to successful enrichment of heterodimers from co-formulated REGEN-COVⓇ and discuss its potential impacts on drug quality.

Unveiling the Success of Awake Insertion of Supraglottic Airway Device for Ventilation in the Bronchoscopic Management of Tracheal Stenosis.

Tracheal and subglottic stenoses are inflammatory conditions that can arise from a variety of potential etiologies, most commonly as a result of iatrogenic airway injury due to endotracheal intubation. Significant stenosis requires management by endoscopy or surgical resection. We describe a case of recurrent subglottic cuff stenosis with an episode of sudden desaturation in a 25-year-old female. The management involved balloon dilatation, laser ablation, and topical mitomycin C application through a flexible fiberoptic bronchoscope. Ensuring safe gas exchange during bronchoscopy was a priority, and this was achieved by maintaining ventilation with a supraglottic airway device, which was inserted in an awake patient after adequate tropicalization of the oral cavity. The intervention successfully helped in the management of stenosis and also addressed the complication of sudden complete airway collapse due to sedation.

Metaphedrone (3-Methylmethcathinone): Pharmacological, Clinical, and Toxicological Profile.

Introduction: Synthetic cathinones are a group of novel psychoactive substances used as an alternative to classical recreational drugs. As a result of legal prohibitions on older generations of these compounds, new formulations appeared on the drug market. One of them is metaphedrone (3-methylmethcathinone, 3-MMC), a structural isomer of 4-methylmethcathinone and a psychostimulant drug. Metaphedrone became popular in a large number of countries in a short period of time. The aim: The collection, analysis, and review of relevant research on the subject of metaphedrone in order to present information about the pharmacological, clinical, and toxicological profile of this compound. An assessment of the significance and role of metaphedrone in consumption patterns of novel psychoactive substances among recreational drug users. Methodology: By using search engines like Google Scholar and PubMed, the relevant literature on metaphedrone was looked for and analyzed. The search was not limited to a specific period of time. All information regarding the compound of interest was analyzed and presented. Key results and discussion: All novel psychoactive substances are abused due to their pronounced stimulatory, hallucinogenic, dissociative, and euphoric and/or relaxing characteristics. Users of 3-methylmethcathinone usually opt for this substance for recreational purposes and/or sexual stimulation. Metaphedrone has the potential to cause a psychological dependence to the users. It was determined in relevant studies that most users are from 17 to 50 years of age. Older users usually administer metaphedrone intravenously, while younger ones usually choose snorting and oral ingestion of the drug. In Serbia, metaphedrone is a legally controlled substance. The pharmacodynamic properties make metaphedrone similar to classical recreational drugs. The method of administration, mainly repeated administration in a single session, could be explained using the pharmacokinetic profile of the drug. The most reported symptoms of intoxication were those of a sympathomimetic nature, such as tachycardia, chest pain, hypertension, diaphoresis, and agitation. Most intoxications and fatal outcomes occurred to users who combined several psychoactive substances. The correlation between measured blood concentrations of the drug and outcomes of intoxication was not found. The mechanisms of metaphedrone's toxicity are not fully understood. Conclusions: There is an increasing trend of abuse of metaphedrone among recreational drugs users. Future studies should focus on pharmacological and toxicological effects of metaphedrone on animals and humans.

Novel purification platform based on multimodal preparative scale separation of mAb fragments and aggregates.

Monoclonal antibodies (mAbs) continue to dominate the biopharmaceutical industry. Certain mAbs are prone to fragmentation and clipping and in these cases, adequate removal of these species is critical during manufacturing. Fragments can be generated during fermentation, purification, storage, formulation, and administration. Their addition to the acidic charge-variant of the purified mAb has been reported to decrease stability and potency of the final product. However, contrary to mAb aggregation, manufacturers have not given much attention to removal of fragments and clipped species and as a result most conventional mAb platforms offer at best limited capabilities for their removal. In this study, we propose a novel purification platform that uses multimodal chromatography and achieves complete removal of a range of mAb fragments and clipped products (25-120 kDa). The utility of the platform has been successfully demonstrated for 2 IgG1s and 2 IgG4s. Further, adequate removal of the various host cell impurities such as host cell proteins (<10 ppm) and host cell DNA (<5 ppb) has been achieved. Finally, the platform was able to deliver adequate removal of high molecular weight impurities (<1 %) and a 30 % clearance of the acidic charge variant. The proposed single step has been shown to deliver what the polishing chromatography and intermediate purification chromatography steps deliver in a traditional mAb platform.

Identification and physiological activity of (methoxymethyl)triphenylphosphonium chloride as a new phytotoxin isolated from Rhizoctonia solani AG-3 TB.

Rhizoctonia solani as a cosmopolitan fungus is the causative agent of many crop diseases and leads to significant economic losses in crop production. To explore the toxin structure and physiological activity of R. solani AG-3 TB, high-performance liquid chromatography (HPLC), infrared absorption spectrum (IR), and nuclear magnetic resonance spectrum (NMR) were required. Here, the compound (methoxymethyl)triphenylphosphonium chloride (MMC) with the molecular formula C20H20ClOP was purified and identified from R. solani AG-3 TB. The pure compound MMC treated at 20 µg/mL, 50 µg/mL, and 100 µg/mL can cause obvious necrosis on leaves, increase active oxygen species (AOS), decrease chlorophyll content, and damage cellular structure. The results enrich the understanding of toxin compounds for R. solani and provide valuable insights into the toxicology of R. solani AG-3 TB.

A document analysis of the South African national guidelines for medical male circumcision and the implications for infant and child male circumcision decision-making.

South Africa's 2016 medical male circumcision (MMC) guidelines ("the guidelines") provide direction for the MMC programme's implementation in South Africa. The aim of our document analysis was to assess the guidelines, particularly in lieu of changing guidance from WHO and PEPFAR. We then assessed how the guidelines might be applied to infant and child male circumcision (ICMC). The analysis was performed by reviewing South Africa's guidelines, along with international documents used in developing those guidelines, to identify the historical development of the guidelines, as well as the implications for MMC and ICMC decision-making within the South African context. The following principles were analysed within the context of South Africa's guidelines: (1) quality and safety; (2) informed consent; (3) confidentiality; (4) human rights; and (5) accessibility of services. Tthe document analysis also identified ambiguities that exist in the guidelines, particularly regarding consent, recognising religious or cultural exemptions, and guaranteeing the best interests of the child. South Africa's MMC guidelines could benefit from incorporating common definitions to assist with interpretation and understanding, thus preventing confusion and controversy among programme planners, parents and boys. The guidelines were made available in 2016 and recommendations for circumcision have evolved as new research and information has become available. South Africa's National Department of Health should review and update these guidelines, with a focus on both MMC and ICMC issues, so that they reflect the most up-to-date, accurate information available, to avoid inconsistent practices, risks, and litigation in the management of the programme. This study was situated within a qualitative paradigm and applied a social choice theory perspective to make sense of the MMC guidelines. The study concludes that future policy revisions should develop a broader understanding of the complex medical male circumcision decision-making process, particularly faced by parents.

Alpha-Momorcharin, a type I ribosome inactivating protein, induced apoptosis of hepatocellular carcinoma SK-HEP-1 cells through mitochondrial pathway.

Alpha-Momorcharin (α-MMC), as one of the most important type I RIPs, has been reported to exert inhibitory effects against various tumour cells through its N-glycosidase activity. The present study was designed to propose an efficient purification strategy and explored its mechanism of apoptosis signalling pathway against human liver cancer cells SK-Hep-1. α-MMC can be successfully obtained by our purification strategy combining ion-exchange and gel-filtration chromatography. The functional studies revealed that α-MMC obviously increased the level of ROS and apoptosis rate, induced cell cycle arrest in the G1 phase, and depolarised MMP of SK-Hep-1 cells. To further confirm whether α-MMC could induce mitochondria involved apoptosis, we found that PARP-1, Caspase-3, Caspase-9, and BCL-2 were downregulated upon α-MMC. Taken together, these results suggested that this natural purified α-MMC can induce apoptosis involved mitochondria and may serve as a potential novel therapeutic drug in the treatment of human liver cancer in the future.

Regulating the properties of XQ-2d for targeted delivery of therapeutic agents to pancreatic cancers.

Enhanced recognition ability, cell uptake capacity, and biostability are characteristics attributed to aptamer-based targeted anticancer agents, and are possibly associated with increased accumulation at the tumor site, improved therapeutic efficacy and reduced negative side effects. Herein, a phosphorothioate backbone modification strategy was applied to regulate the biomedical properties of pancreatic cancer cell-targeting aptamer for efficient in vivo drug delivery. Specifically, the CD71- targeting aptamer XQ-2d was modified into a fully thio-substituted aptamer S-XQ-2d, improving the plasma stability of S-XQ-2d and mitomycin C (MMC)-functionalized S-XQ-2d (MFSX), thus considerably prolonging their half-life in mice. Moreover, the binding and uptake capacities of S-XQ-2d were significantly enhanced. MFSX showed the same level of cytotoxicity as that of MMC against targeted cancer cells, but lower toxicity to non-targeted cells, highlighting its specificity and biosafety. Brief mechanistic studies demonstrated that XQ-2d and S-XQ-2d had different interaction modes and internalization pathways with the targeted cells.

High-Modulus Laminated SiC/AZ91 Material with Adjustable Microstructure and Mechanical Properties Based on the Adjustment of the Densities of the Ceramic Layers.

To address the issue of inadequate strength and plasticity in magnesium matrix composites, SiC preforms were prepared using the freeze-casting process. The effects of sintering temperature on the microstructure, mechanical properties, and fracture behavior of SiCp/AZ91 magnesium matrix composites were studied by controlling the density of SiC preforms through low-temperature sintering. The results indicate that as the sintering temperature decreases, the reaction products in the SiC layer decrease, resulting in lower SiC preform density and increased content of AZ91 alloy filling in the layer. The increased alloy content in the ceramic layer not only inhibits crack initiation but also hinders crack propagation, thereby endowing the SiCp/AZ91 laminated material with excellent compressive strength and compressive strain. At the sintering temperature of 900 °C, the SiCp/AZ91 laminated material exhibits impressive compressive strength and strain values of 623 MPa and 8.77%, respectively, which demonstrates an excellent combination of strength and toughness.

Multi-Body Dynamic Analysis of Hydrostatic Bearing with the MMC Material in Micro-Nano Machining.

This study focuses on the analysis of a linear hydrostatic bearing using harmonic frequency response and harmonic response simulations. The aim is to evaluate the feasibility of replacing the existing alloy steel material with a metal matrix composite (MMC) in terms of its performance and dynamic characteristics for both the base and carriage parts. The simulation results indicate that the MMC material exhibits higher resonant frequencies and improved damping capabilities compared to the structural steel material. The higher resonant frequencies observed in the MMC material are attributed to its stiffness and structural properties. These properties contribute to increased natural frequencies and improved vibration damping characteristics. This suggests that incorporating the MMC material in the bearing design could enhance motion control, improving the ability to precisely control and manipulate the movement of components or systems. In the context of ultraprecision machining applications, incorporating the MMC material in the hydrostatic bearing design can also lead to a more accurate and controlled motion, resulting in improved precision and finer machining outcomes. The displacement analysis confirms that both materials meet the specifications provided by the manufacturer, supporting the viability of using MMC as an alternative. However, further experimental validation and considerations of material feasibility, manufacturing factors, and cost-effectiveness are necessary before implementing the MMC material in practical applications. Overall, this research highlights the potential benefits of MMC in the design of linear hydrostatic bearings, paving the way for enhanced performance in ultraprecision machining processes.

Laser-Based Manufacturing of Ceramics: A Review.

Ceramics are widely used in microelectronics, semiconductor manufacturing, medical devices, aerospace, and aviation, cutting tools, precision optics, MEMS and NEMS devices, insulating components, and ceramic molds. But the fabrication and machining of the ceramic-based materials by conventional processes are always difficult due to their higher hardness and mechanical properties. Therefore, advanced manufacturing techniques are being preferred for these advanced materials, and out of that, laser-based processes are widely used. The benefits of laser fabrication and machining of ceramics include high precision, reduced thermal damage, non-contact processing, and the ability to work with complex geometries. Laser technology continues to advance, enabling even more intricate and diverse applications for ceramics in a wide range of industries. This paper explains various laser based ceramic processing techniques, such as selective laser sintering and melting, and laser machining techniques, such as laser drilling, etc. Identifying and optimizing the process parameters that influence the output quality of laser processed parts is the key technique to improving the quality, which is also focused on in this paper. It aims to facilitate the researchers by providing knowledge on laser-based manufacturing of ceramics and their composites to establish the field further.