Skeletal Class III phenotype: Link between animal models and human genetics: A scoping review.

This study aimed to identify evidence from animal studies examining genetic variants underlying maxillomandibular discrepancies resulting in a skeletal Class III (SCIII) malocclusion phenotype. Following the Manual for Evidence Synthesis of the JBI and the PRISMA extension for scoping reviews, a participant, concept, context question was formulated and systematic searches were executed in the PubMed, Scopus, WOS, Scielo, Open Gray, and Mednar databases. Of the 779 identified studies, 13 met the selection criteria and were included in the data extraction. The SCIII malocclusion phenotype was described as mandibular prognathism in the Danio rerio, Dicentrarchus labrax, and Equus africanus asinus models; and as maxillary deficiency in the Felis silvestris catus, Canis familiaris, Salmo trutta, and Mus musculus models. The identified genetic variants highlight the significance of BMP and TGF-ß signaling. Their regulatory pathways and genetic interactions link them to cellular bone regulation events, particularly ossification regulation of postnatal cranial synchondroses. In conclusion, twenty genetic variants associated with the skeletal SCIII malocclusion phenotype were identified in animal models. Their interactions and regulatory pathways corroborate the role of these variants in bone growth, differentiation events, and ossification regulation of postnatal cranial synchondroses.

Efficacy of Clear Aligners in Treating Class III Malocclusion With Mandibular Molar Distalization: A Systematic Review.

The primary goal of orthodontic therapy in pseudo-class III is to restore the proper dental connection by rectifying the canine and molar relationship to Class I through lower molar and premolar visualization, as well as providing normal anterior overjet. The purpose of this systematic study was to determine the efficacy of clear aligners in treating class III malocclusion with mandibular molar distalization. A wide range of searches were done on various search engines like Cochrane, Web of Science, Embase, PubMed, Scopus, and Google Scholar to collect relevant articles related to our study. This review's article selection was guided by the PRISMA flowchart. The electronic findings provided numerous articles with nearly 78 articles regarding clear aligners in class III malocclusion with molar distalization. From this, seven full-text papers were evaluated for eligibility criteria, with two articles being rejected with justification and five articles being elaborated in the current systematic review. The current evidence of this review suggested that the clear aligners were effective in correcting class III malocclusion with molar distalization. The amount of molar distalization is about 2 to 3 mm, which helps in achieving molar and canine relationship in class I, with a high compliance level and also improvement of the facial profile.

Characteristics of Mandibular Arch Forms in Patients with Skeletal Mandibular Prognathism.

Arch forms in orthodontics are considered to affect occlusal stability. This study's subjects were 47 patients (Class III S group) who visited the Chiba Dental Center of Tokyo Dental College and were surgical orthodontic cases, and 60 patients with Class I malocclusion were selected as the control group. A mandibular model of each subject was plotted with each tooth on a digitizer. The clinical bracket points of each tooth were plotted, and intercanine and intermolar measurements were taken. The least squares method was used to fit a quartic equation, and the arch form was drawn. The Class IIIS group was divided by Wits appraisal and facial pattern into a dolichofacial or brachyfacial pattern, and arch forms were compared. The results show that the Class IIIS group had a significantly smaller intermolar width, canine depth, and molar depth and a significantly larger canine W/D ratio. In those with a dolichofacial pattern, the anterior curve of the arch form tended to be flat and the posterior curve narrower. This is because, in skeletal mandibular prognathism, the mandibular anterior shows lingual tipping, and the molars show palatal tipping due to dental compensation, and it was inferred that this tendency was higher in high-angle cases.

Dental Occlusion Characteristics for Treatment Decision-Making Regarding Surgery-First Approach in Orthodontics.

The surgery-first approach (SFA) is conducted to decrease the difficulty and duration of orthodontic treatment by correcting the skeletal discrepancy at the initial stage of treatment. However, the indication of the SFA has not been well defined yet. This study explored the dental occlusion characteristics for treatment decision-making regarding the SFA. A total of 200 skeletal Class III patients were consecutively collected and divided into two groups: the orthodontic-first approach (OFA) group and the SFA group. The pretreatment digital dental models and lateral cephalograms were measured. Logistic regression was completed and receiver operating characteristic (ROC) curves were obtained to predict the probability of the SFA. Results showed that the ROC model with L1-MP, upper and lower arch length discrepancy, overbite, and asymmetric tooth number as influencing factors revealed that the sensitivity and specificity for determining SFA were 83.0% and 65.0%, respectively; the accuracy of prediction was 75.0%. In conclusion, our findings indicate that the six measurements from digital dental models and lateral cephalograms can be effectively applied in treatment decision-making for the SFA with satisfactory accuracy.

Skeletal structure of asymmetric mandibular prognathism and retrognathism.

BACKGROUND: This study aimed to compare the skeletal structures between mandibular prognathism and retrognathism among patients with facial asymmetry. RESULTS: Patients who had mandibular asymmetry with retrognathism (Group A) in The Netherlands were compared with those with deviated mandibular prognathism (Group B) in Korea. All the data were obtained from 3D-reformatted cone-beam computed tomography images from each institute. The right and left condylar heads were located more posteriorly, inferiorly, and medially in Group B than in Group A. The deviated side of Group A and the contralateral side of Group B showed similar condylar width and height, ramus-proper height, and ramus height. Interestingly, there were no inter-group differences in the ramus-proper heights. Asymmetric mandibular body length was the most significantly correlated with chin asymmetry in retrognathic asymmetry patients whereas asymmetric elongation of condylar process was the most important factor for chin asymmetry in deviated mandibular prognathism. CONCLUSION: Considering the 3D positional difference of gonion and large individual variations of frontal ramal inclination, significant structural deformation in deviated mandibular prognathism need to be considered in asymmetric prognathism patients. Therefore, Individually planned surgical procedures that also correct the malpositioning of the mandibular ramus are recommended especially in patients with asymmetric prognathism.

Missense polymorphisms potentially involved in mandibular prognathism.

Objective: The current study aimed to identify and analyze missense single nucleotide polymorphisms (SNPs) that can potentially cause mandibular prognathism. Methods: After reviewing the articles, 56 genes associated with mandibular prognathism were identified and their missense SNPs were retrieved from the NCBI website. Several web-based tools including CADD, PolyPhen-2, PROVEAN, SNAP2, PANTHER, FATHMM, and PON-P2 were used to filter out harmful SNPs. Additionally, ConSurf determined the level of evolutionary conservation at positions where SNPs occur. I-Mutant2 and MUpro predicted the effect of SNPs on protein stability. Furthermore, to investigate the structural and functional changes of proteins, HOPE and LOMETS tools were utilized. Results: Based on predictions in at least four web-based tools, the results indicated that PLXNA2-rs4844658, DUSP6-rs2279574, and FBN3-rs33967815 are harmful. These SNPs are located at positions with variable or average conservation and have the potential to reduce the stability of their respective proteins. Moreover, they may impair protein activity by causing structural and functional changes. Conclusions: In this study, we identified PLXNA2-rs4844658, DUSP6-rs2279574, and FBN3-rs33967815 as potential risk factors for mandibular prognathism using several web-based tools. According to the possible roles of PLXNA2, DUSP6, and FBN3 proteins in ossification pathways, we recommend that these SNPs be investigated further in experimental research. Through such studies, we hope to gain a better understanding of the molecular mechanisms involved in mandible formation.

Long-term evaluation of the upper airway following mandibular setback surgery in the patients with mandibular prognathism.

OBJECTIVE: The aim of this study was to evaluate the changes in the upper airway following mandibular setback surgery. METHODS: The patients underwent mandibular setback surgery and cone-beam computed tomography scan data obtained at four time points: before surgery, immediately after surgery, short- and long-term follow-up. Upper airway geometries were segmented and extracted at each time point. Time-averaged airflow through the upper airway was evaluated at each time point. The measurements of airway volume and minimum cross-sectional areas were obtained at four time points. RESULTS: The airway volume and cross-sectional areas of airway significantly decreased immediately after surgery (p = 0.013 for airway volume and 0.016 for cross-sectional area). At short-term follow-up, the decreased airway volume and cross-sectional areas still showed statistically significant difference to original dimension (p = 0.017 for airway volume and 0.006 for cross-sectional area). At long-term follow-up, although there were no statistical significances (p = 0.859 for airway volume and 0.721 for cross-sectional area), the airway volume and cross-sectional areas had increased slightly compared to those at short-term follow-up. CONCLUSIONS: Although the airflow and dimensional parameters of the upper airway worsened following mandibular setback surgery, there was a tendency to gradually recover during long-term follow-up.

Swallowing Functions after Sagittal Split Ramus Osteotomy with Loose Fixation for Mandibular Prognathism: A Retrospective Case Series Research.

Sagittal split ramus osteotomy (SSRO) is a standard surgical technique for patients with mandibular prognathism. However, the appropriate position of the proximal fragment is not strictly defined, and rigid fixation can induce early postoperative skeletal relapse and temporomandibular (TMJ) disorders. Loose fixation can be expected to seat the proximal bone fragments in a physiologically appropriate position, thereby reducing adverse events. Although long-term skeletal stability has been achieved using SSRO without fixation, the evaluation of preoperative and postoperative eating and swallowing functions remains unclear, and this study aimed to clarify this point. We evaluated mastication time, oral transfer time, and pharyngeal transfer time using videofluorography (VF) preoperatively, two months postoperatively, and six months postoperatively, and along with the position of anatomical landmarks using cephalometric radiographs, modified water swallowing test (MWST), food test (FT), and repetitive saliva swallowing test (RSST) were used to evaluate postoperative swallowing function. Four patients (one male, three females; mean (range) age 26.5 (18-51) years) were included, with a mean setback of 9.5 mm and 6.5 mm on the right and left sides, respectively. Postoperative eating and swallowing functions were good in VF, cephalometric analysis, MWST, FT, and RSST. In the present study, good results for postoperative eating and swallowing functions were obtained in SSRO with loose fixation of the proximal and distal bone segments.

A three-dimensional investigation of mandibular deviation in patients with mandibular prognathism.

BACKGROUND: Craniofacial disharmony in cases of jaw deformity associated with abnormal lateral deviation of the jaw mostly involves both the maxilla and mandible. However, it has been still difficult to capture the jaw deviation aspect in a 3-dimensional and quantitative techniques. In this study, we focused on 3-dimensional mandibular morphology and position of the condylar head in relation to the base of the skull in patients with mandibular prognathism, one of the most common jaw deformities. We used cluster analysis to quantify and classify deviation and clarified its characteristics. We also investigated the degree of correlation between those findings and menton (Me) deviation measured on frontal cephalograms, which is a conventional indicator of jaw deformity. RESULTS: Findings obtained from 100 patients (35 men, 65 women) were classified into the following three groups based on mandibular morphology and condylar position relative to the skull base. Then, reclassification using these parameters enabled classification of cluster analysis findings into seven groups based on abnormal jaw deviation characteristics. Comparison among these seven groups showed that the classification criteria were ramus height, mandibular body length, distance from the gonion to the apex of the coronoid process, and the lateral and vertical positions of the mandible. Weak correlation was also found between Me deviation on frontal cephalograms and each of the above parameters measured on 3D images. CONCLUSIONS: Focusing on mandibular morphology and condylar position relative to the skull base in patients with mandibular prognathism, we used cluster analysis to quantify and classify jaw deviation. The present results showed that the 3D characteristics of the mandible based on mandibular morphology and condylar position relative to the skull base can be classified into seven groups. Further, we clarified that Me deviation on frontal cephalograms, which has been used to date, is inadequate for capturing jaw deviation characteristics.

A detailed radiomorphometric analysis of the mandibular foramen, lingula and anti-lingula with a special emphasis on mandibular prognathism.

INTRODUCTION: The aim of this study was to evaluate radiomorphometric differences of mandibular foramen (MF), lingula (Li), and anti-lingula (AL) between prognathic and non-prognathic patients, using cone-beam computed tomography (CBCT). METHODS: A total of 228 3D CBCT images of 57 prognathic and 57 non-prognathic patients were retrospectively evaluated. The distances between MF or Li to occlusal plane (OP), anterior border of ramus (AR), posterior border of ramus (PR), sigmoid notch (SN), gonion (Go) and distances Li to MF were measured. The presence of AL, and the distances to Li were also assessed in both groups. RESULTS: In prognathic patients the mean distances of MF-AR and Li-PR were lesser, and Li-OP was greater (p < 0.05). However, distances from MF or Li to the other ramal landmarks were similar in both groups (p > 0.05). Presence of AL was found at 53 sides in prognathic and 20 sides in non-prognathic groups (p < 0.05). The horizontal distance of Li-MF was greater in prognathic patients (p < 0.05). On the other hand, there was no difference between groups regarding the horizontal distance of Li-Al, and the vertical distances of Li-MF and Li-AL (p > 0.05). CONCLUSION: The present study provided valuable data regarding morphological differences of MF-AR, Li-MF and Li-OP, which should be considered in the preoperative assessment of patients with mandibular prognathism. Presence of AL was more common in prognathic patients and mainly located above Li. 3D CBCT applications facilitated assessment of AL and its relationship with Li.

Bite force changes after surgical correction of mandibular prognathism in subjects with increased vertical dimension : A prospective clinical trial.

PURPOSE: Occlusal bite force (OBF) is the most important parameter in assessing biting efficiency. The aim of this study was to record OBF changes after surgical correction of high angle maxillary/mandibular (Max/Mand) class III patients and to compare these with that recorded in class III patients with average Max/Mand angle. MATERIALS AND METHODS: Initially included were 42 patients with severe class III skeletal malocclusion who were scheduled for orthodontic surgery: group 1-22 patients with increased vertical relationship scheduled for bimaxillary surgery; group 2-20 patients with average vertical relationship scheduled for mandibular setback only. OBF measurements before surgery (T0), at debonding (T1) and at least 3 months after debonding (T2) were recorded using a portable occlusal force gauge. The following were also measured: maximum OBF (MOBF) achieved by the subject on each side, averaged OBF on each side (AOBF) and maximum OBF at the incisal region (MIOBF). At T2, only 33 patients (group 1: 17 and group 2: 16) were included in the analysis due to loss to follow-up. RESULTS: MOBF increased significantly in group 1, while no significant changes were detected in group 2. MIOBF increased after surgical correction in both groups. Significant increase in MIOBF was observed at T1 (P < 0.001) followed by an insignificant decrease during the observation period (3-6 months after treatment; P > 0.05). The two groups differed significantly in MOBF at T1 and T2, while no statistically significant differences were detected between the groups for MIOBF changes at the various time intervals (P > 0.05). The number of posterior teeth with occlusal contacts increased in both groups. Relapse was detected in group 1 where the number of posterior teeth in contact decreased during the observation period (T1-T2). CONCLUSION: OBF greatly improved after surgical correction of the vertical morphology. Correction of high angle mandibular prognathism improves oral function in addition to esthetics.

Three-Dimensional Analysis of the Cranial Base Structure in Patients with Facial Asymmetry.

Facial asymmetry is often seen in patients with skeletal mandibular prognathism and is associated with deformities in the maxillofacial and head regions. The maxillofacial deviation is three-dimensional and affects not only the lateral deviation of the mandible and midface, but also the cranium. This study conducted a three-dimensional morphological evaluation of the cranial base morphology of patients with skeletal mandibular prognathism (ANB < 0°, Wits < 0 mm) with the aim of examining the relationship between deformities of the head region and facial asymmetry. Data obtained from computed tomography conducted during the initial examination of patients with and without skeletal mandibular prognathism with facial asymmetry were used. Differences in the position of structures present in the cranial base were measured, and the association between cranial deformities and mandibular deviation was assessed. The middle cranial base area and the lateral deviation of the mandibular fossa were significantly larger in patients with facial asymmetry compared to those without facial asymmetry. In addition, a correlation between the amount of mandibular deviation and the area of the anterior cranial base was identified in patients with significant cranial deformity (p = 0.012). Given the identified association between the structure of the head region and facial asymmetry, further studies are needed to determine the factors implicated in the growth process.

Changes in Preexisting Temporomandibular Joint Clicking after Orthognathic Surgery in Patients with Mandibular Prognathism.

This study aimed to investigate the changes in preexisting temporomandibular joint (TMJ) clicking and the new incidence of TMJ clicking after orthognathic surgery. A total of 60 patients (30 men and 30 women) with mandibular prognathism underwent intraoral vertical ramus osteotomy (IVRO) for a mandibular setback. The setback amount and TMJ clicking symptoms (preoperative and one year postoperative) were recorded. To assess the risk of new incidence of TMJ clicking in asymptomatic patients, the cutoff value for postoperative mandibular setback was set at 8 mm. The left and right mandibular setbacks were 11.1 and 10.9 mm in men, respectively, and 10.7 and 10.0 mm in women, respectively. Thus, no difference in setback amount on either side was observed between the sexes. The improvement rate in patients with preexisting TMJ clicking was 69.2% (18 of 26 sides); the postoperative improvement rates were 71.4% (setback amount > 8 mm) and 60% (setback amount ≤ 8 mm). IVRO may reduce the severity of preexisting TMJ clicking. A high setback amount (>8 mm) may not be associated with a considerable increase in the risk of postoperative TMJ clicking.

Long-term condylar remodelling after bimaxillary orthognathic surgery in skeletal Class III patients.

In this study, we aimed to evaluate long-term condylar remodelling in skeletal Class III patients who underwent bimaxillary orthognathic surgery using cone-beam computed tomography (CBCT). Twenty-three patients were studied retrospectively, and a total of 4 CBCT scans were obtained for each subject: 1 month before surgery (T0), immediately after the surgery (T1), 6 months after the surgery (T2), and 6.1 (±2.1 years after the surgery) (T3). Condylar remodelling was measured using the condylar volume, height, width, and depth. To examine a significant change, a one-way repeated measures analysis of variance was performed. The correlation between postoperative skeletal movement and condylar volume was assessed using Spearman's correlation analysis. Condylar volume and height showed a significant decrease from T1 to T2 but a significant increase from T2 to T3. Furthermore, a significant decrease was observed between T1 and T3. The condylar width and depth showed no significant changes. Postoperative skeletal movement showed no correlation with the change in condylar volume. The change in condylar volume mostly occurred as the condylar height changed. However, it did not contribute much to the postoperative skeletal movement.

Clinical significance of postoperative skeletal relapse in the treatment of mandibular prognathism: Receiver operating characteristic curve analysis.

BACKGROUND/PURPOSE: Postoperative skeletal relapse is the most important issue in patients undergoing orthognathic surgery. This study aimed to investigate clinical skeletal relapse (≥2 mm) after mandibular setback surgery (intraoral vertical ramus osteotomy: IVRO) using receiver operating characteristic curve (ROC curve) analysis. METHODS: Serial cephalograms of 40 patients with mandibular prognathism were obtained at different time points: (1) before surgery (T1), (2) immediately after surgery (T2), and (3) at least with a 2-year follow-up postoperatively (T3). The menton (Me) was used as the landmark for measuring the amount of mandibular setback and postoperative skeletal relapse. Postoperative stability (T32) was divided into groups A and B by skeletal relapse ≥2 mm and <2 mm, respectively. The area under the ROC curve (AUC) was used to determine the cut-off point for mandibular setback. RESULTS: At the immediate surgical setback (T21), the amount of setback in group A (15.55 mm) was significantly larger than in group B (10.97 mm). Group A (T32) showed a significant relapse (4.07 mm), while group B showed a significant posterior drift (1.23 mm). The amount of setback had the highest AUC area (0.788). The cut-off point was 14.1 mm (T21) that would lead to a clinical relapse of 2 mm (T32). CONCLUSION: In IVRO, the postoperative mandibular positions reveal posterior drift and anterior displacement (relapse). The experience of clinical observation and patient perception of postoperative skeletal relapse was ≥2 mm. In the ROC curve analysis, the cut-off point of setback was 14.1 mm.

Changes in the condylar volume and skeletal relapse following orthognathic surgery in patients with dentofacial deformity: A retrospective study.

OBJECTIVE: To evaluate the relationship between the changes in condylar volume and maxillofacial skeletal morphology according to sex as well as the relationship between condylar volume reduction and skeletal relapse in patients who underwent orthognathic surgery. METHODS: Ninety-five patients were categorized into skeletal Class III, Class II, and facial asymmetry groups. Computed tomography scans taken preoperatively and at 1 year postoperatively were used for quantitative measurement. RESULTS: Postoperative condylar volume was reduced in both the Class II group and the deviated side of the asymmetry group. Both female and Class II deformity were significant predictors of postoperative reduction in the condylar volume. There was a significant correlation between skeletal relapse and postoperative change in condylar volume in the Class II group. CONCLUSION: Postoperative condylar resorption may be associated with preoperative maxillofacial skeletal morphology and sex and also with skeletal relapse in the Class II group.

Orthognathic correction and corticobasal implant-supported prostheses as a treatment modality for partial edentulism with mandibular prognathism: A case report and review of literature.

INTRODUCTION: Mandibular prognathism manifests as elongation of the mandible in the anteroposterior direction, resulting in a sunken appearance of the middle third of the face and sad look of the eyes. It adversely affects esthetics, function, and oral health, reducing the patients' self-esteem. It therefore presents a significant challenge. PRESENTATION OF CASE: A 23-year-old woman presented with prognathic features characterized by mandibular protrusion, maxillary retrusion, a prominent chin, and reduce self-esteem. Intraoral examination revealed multiple extracted teeth, severe fracture of the crown at 23, mobility of the fixed prosthesis on 13, 14, 15, and 16, a root stump of 18, and periodontally compromised teeth (31, 32, 33, 41, and 42). A multidisciplinary team formulated the following treatment plan: stage 1, orthognathic osteotomy to retrude the mandible at 34 and 44; stage II, fabrication of transitional acrylic partial dentures; and stage III: fabrication of definitive corticobasal implant-supported prostheses. The patient was delighted with the treatment and complied with the oral hygiene instructions and follow-up program. After 7 years of function, the patient presented without complaints and exhibited significant improvement in oral health, self-esteem, and quality of life. DISCUSSION: The management of mandibular prognathism requires a multidisciplinary approach. The treatment implemented was considered the optimal option that aligned with the recommendations of several researchers to reduce facial disfigurement and rehabilitate the edentulous state. CONCLUSION: The use of corticobasal implant-supported prostheses for the rehabilitation of patients with partial edentulism can significantly improve the treatment outcome following orthognathic surgery in cases with mandibular prognathism.

Changes in facial width according to the ostectomy level of the proximal bone segment in intraoral vertical ramus osteotomy for mandibular prognathism.

BACKGROUND: This study aimed to investigate the changes in facial width according to the ostectomy level of the proximal segment after orthognathic surgery using intraoral vertical ramus osteotomy (IVRO) in patients with mandibular prognathism. METHODS: The participants included 32 individuals who were diagnosed with class III malocclusion prior to surgery. All participants underwent orthognathic surgery using either version of IVRO. The surgery patients were categorized into two groups depending on the type of proximal bone-segment ostectomy technique used: patients whose osteotomy height was at the level of the mandibular tooth occlusal surface (the mandibular tooth surface-level group) and patients whose osteotomy height was at the level of the mandibular inferior border (the mandibular inferior border-level group). The distances between the mandibular width and soft tissue width at the height of the sigmoid notch, mandibular foramen, and alveolar bone and at the anterior-posterior location of the mandibular condyle, mandibular foramen, and coronoid process were compared between the groups. All data were compared to identify differences between preoperative and postoperative measurements. RESULTS: The postoperative change in facial soft tissue width at the intersection of the coronal plane with the coronoid process and the horizontal plane at the height of the mandibular alveolar bone in the group with osteotomy at the level of the mandibular occlusal surface differed significantly from that in the group with osteotomy at the level of the mandibular inferior border, with respective increases (mean ± SD) of 1.3 ± 3.5% and 4.7 ± 5.6%, compared to preoperative measurements (p = 0.050). CONCLUSIONS: Proximal segment ostectomy at the level of the mandibular occlusal surface must be considered with regard to postoperative facial soft tissue width in vertical ramus osteotomy. Additionally, it is necessary to study the visual effect of the width of the mandible appearing small because of the posterior position of the mandible, even when the mandibular facial width is maintained.

Extraoral vertical ramus osteotomy combined with internal fixation for the treatment of mandibular deformities.

Extraoral vertical ramus osteotomy (EVRO) is used in orthognathic surgery for the treatment of mandibular deformities. Originally, EVRO required postoperative intermaxillary fixation (IMF). EVRO has been developed using rigid fixation, omitting postoperative IMF. We examined retrospectively the long-term stability and postoperative complications for patients with mandibular deformities who underwent EVRO with internal rigid fixation. Patients who were treated with EVRO for a mandibular deformity in the period 2008-2017 at the Clinic of Oral and Maxillofacial Surgery, Mölndal, Sweden were included (N = 26). Overjet and overbite were calculated digitally and cephalometric analyses were performed preoperatively, and at three days, six months, and 18 months postoperatively. There was a general setback of the mandible, decreased gonial angle and reduced degree of skeletal opening. Excellent dental and vertical skeletal stabilities were seen up to 18 months postoperatively, although relapse was seen sagitally up to six months postoperatively. Since the overjet did not show any significant change over time, the sagittal skeletal changes have been attributed to dental compensation. There was no permanent damage to the facial nerve and 5.8% neurosensory damage to the inferior alveolar nerve was observed.

A comparative study on cephalometric differences in maxillofacial morphology between skeletal Class III cases with and without acromegaly: a pilot study.

OBJECTIVES: The most typical maxillofacial feature of patients with acromegaly is mandibular protrusion. This study aimed to determine differences in maxillofacial morphology between skeletal Class III patients with and without acromegaly using cephalometric analysis. METHODS: Cephalograms of 37 patients with acromegaly (Acro), 37 age-matched non-acromegalic patients with skeletal Class III malocclusion (C-III), and 37 age-matched Class I malocclusion patients (C-I; control) were retrospectively collected. The skeletal and dental morphology of each group was analyzed using cephalometric analysis, which included linear and angular measurements and facial profilograms. In addition, we analyzed diagnostic performance and cutoff values for discriminating acromegaly from skeletal Class III malocclusion using receiver operating characteristic (ROC) curve analysis. RESULTS: The mandibular ramus height was larger in the Acro group than in the other groups. The increase in L1/MP in the Acro group, which represented labial inclination of the mandibular central incisors, was the most characteristic feature in this study. ROC curve analysis indicated that a cutoff value of 88.4° for L1/MP had the highest diagnostic performance in discriminating acromegaly from non-acromegalic Class III malocclusion. CONCLUSIONS: Acromegaly was characterized by a greater degree of bimaxillary prognathism than was non-acromegalic Class III malocclusion. Focusing on labial inclination of the mandibular central incisors would be the most useful way to differentiate acromegaly from non-acromegalic Class III malocclusion.