Internal and external morphological analysis of fused-rooted mandibular second molars in the Chinese population: A micro-computed tomographic study.

This study investigated the root canal morphology of fused-rooted mandibular second molars based on the pulp chamber floor (PCF) and analysed the correlation between the external morphology of the radicular groove, and the internal morphology of the PCF and root canal configuration. A total of 291 fused-rooted teeth collected from the Chinese population were scanned using micro-computed tomography and a dental operating microscope was used for observing the PCFs. The classification of the PCF and root canal configuration were identified according to modified Min et al.'s and Gao et al.'s classifications, respectively. Additionally, a new radicular groove classification was proposed. The correlation among these morphological characteristics was investigated using the chi-square test and Fisher's exact test (p < 0.05). The results showed that 74.2% of teeth had C-shaped PCFs, while 21.0% had non-C-shaped PCFs. As for the root canal configurations, 37.5% of teeth were merging type, 40.9% were symmetrical type, and 14.8% were asymmetrical type. Statistical analysis revealed a significant correlation between the PCF types and the root canal configurations (p < 0.001). The dominant root canal types for teeth with C-shaped PCFs were merging and symmetrical types, while the asymmetrical type was not identified in non-C-shaped PCFs. In addition, significant morphological association between the root canals and radicular grooves was also revealed (p < 0.001). Teeth with different PCF morphologies exhibit specific patterns of root canal category distribution. Understanding the morphological nuances of the root canal based on the PCF can assist clinicians in predicting and identifying the canal configuration beneath the visible orifice.

Relationship between the impacted mandibular third molar and adjacent second molar' external root resorption by conebean computed tomography analysi / Relación entre la reabsorción de la raíz externa del tercer molar mandibular impactado y el segundo molar adyacente mediante análisis de tomografía computarizada de cono

Background: The relationship between the impacted mandibular third molar (IMTM) and the external root re-sorption (ERR) of the mandibular second molar (MSM) was analysed with cone-beam computed tomography(CBCT). The risk factors affecting the ERR of the MSM were examined to provide a reference.Material and Methods: A total of 327 patients (total: 578 teeth) admitted to the Affiliated Hospital of YanbianUniversity for IMTM extraction from January 2017 to December 2019 was chosen and divided according togender and age. The correlation between the IMTM and ERR of MSM was analysed, including inclination angle,impaction direction and depth. The relationship of mandibular ascending ramus classification with ERR of MSMwas also analysed. In addition, the correlation between the MTM impaction type and the severity of ERR wasanalysed.Results: The incidence of ERR of MSM in male patients was higher than in females (27.9% vs.17.6%, p = 0.018).The occurrence and the site of ERR showed statistical differences in the inclination angle [(≤20°, 3.6%) vs. (21°-40°, 27.1%) vs. (41°-60°, 27.6%) vs. (61°-80°, 25.6%) vs. (>80°, 31.7%), p <0.001], impaction direction [(Vertical,1.1%) vs. (Mesial, 32.7%) vs. (Horizontal, 25.3%), p <0.001] and depth of MTM [(Low position, 38.6%) vs. (Medi-an position, 32.0%) vs. (High position, 13.7%), p <0.001]. Also, there was a significant difference in the mandib-ular ascending ramus type [(Class I, 17.4%) vs. (Class II, 32.3%) vs. (Class III, 44.9%), p <0.001]. In addition, theseverity of ERR showed statistical differences in the mesial (40.9%, p<0.05), lower impaction (54.5%, p<0.05)depth of MTM and type III of mandibular ascending ramus (63.6%, p<0.05).Conclusions: The inclination angle, impaction direction, and depth of MTM were the influencing factors for theoccurrence and site of ERR.(AU)

Micro-computed tomography analysis of calcium hydroxide delivery efficacy in C-shaped canal system of mandibular second molars.

BACKGROUND: Calcium hydroxide [Ca(OH)2] is widely accepted as a biocompatible interappointment intracanal medicament. This study aimed to analyze the efficacy of Ca(OH)2 placement into the C-shaped canal system of mandibular second molars using the syringe method with and without lentulo spiral utilizing micro-computed tomography (micro-CT). METHODS: Twenty-four extracted mandibular second molars were instrumented and classified into C-shaped floors (n = 12) and non-C-shaped floors (n = 12). Both groups were placed with Ca(OH)2 using the syringe system, then all teeth were scanned and cleaned, and placed with Ca(OH)2 again but with the syringe system followed by lentulo spiral and rescanned. The specimens were scanned using micro-CT to analyze the volume, volume percentage, uncontacted surface area, and uncontacted surface area percentage of Ca(OH)2 with the two delivery methods in the entire canal and at the apical 4 mm of the canal. Mann-Whitney test and Wilcoxon signed-rank test were used to determine the statistical differences among the groups. RESULTS: Syringe administration used in conjunction with lentulo spiral presented lower uncontacted surface area, a lower percentage of uncontacted surface area, larger volume, and a higher percentage of volume than syringe without lentulo spiral (P < 0.05). There was no significant difference between the C-shaped floor group and the non-C-shaped floor group (P > 0.05) in the Ca(OH)2 uncontacted surface area, volume, and percentages at different regions of canals and among different delivery techniques groups. CONCLUSIONS: The lentulo spiral and syringe technique combination can increase the volume and contacted surface area of Ca(OH)2 in the C-shaped canal system of mandibular second molars.

Combined micro-apical surgery and vital pulp therapy in mandibular second molars with external root resorption caused by impacted teeth.

OBJECTIVES: This study aimed to establish a new treatment of the mandibular second molars with external root resorption caused by impacted teeth to preserve the affected teeth and their vital pulps. METHODS: For mandibular second molars clinically diagnosed as external root resorption caused by impacted teeth, debridement and removal of the root at the resorption site via micro-apical surgery and direct capping of the pulp with bioactive material on the surface of the root amputation via vital pulp therapy were performed immediately after the impacted teeth were extracted. RESULTS: The external root resorption of the affected tooth was ceased. It was asymptomatic with intact crown, normal pulp, periapical alveolar bone reconstruction, normal periodontal ligament, continuous bone sclerosis, and no periapical translucency in radiographic examination at the 1-year postoperative follow-up, thus showing good prognosis. CONCLUSIONS: Simultaneous combination of micro-apical surgery and vital pulp therapy after extraction of impacted teeth could successfully preserve mandibular second molars with ERR caused by impacted teeth and their vital pulps.

Combined micro-apical surgery and vital pulp therapy in mandibular second molars with external root resorption caused by impacted teeth / 华西口腔医学杂志

OBJECTIVES@#This study aimed to establish a new treatment of the mandibular second molars with external root resorption caused by impacted teeth to preserve the affected teeth and their vital pulps.@*METHODS@#For mandibular second molars clinically diagnosed as external root resorption caused by impacted teeth, debridement and removal of the root at the resorption site via micro-apical surgery and direct capping of the pulp with bioactive material on the surface of the root amputation via vital pulp therapy were performed immediately after the impacted teeth were extracted.@*RESULTS@#The external root resorption of the affected tooth was ceased. It was asymptomatic with intact crown, normal pulp, periapical alveolar bone reconstruction, normal periodontal ligament, continuous bone sclerosis, and no periapical translucency in radiographic examination at the 1-year postoperative follow-up, thus showing good prognosis.@*CONCLUSIONS@#Simultaneous combination of micro-apical surgery and vital pulp therapy after extraction of impacted teeth could successfully preserve mandibular second molars with ERR caused by impacted teeth and their vital pulps.

The osteogenesis effect of rhBMP2-loaded calcium phosphate cements in repairing dental extraction sockets.

PURPOSE: After extracting impacted mandibular third molars (IMM3), the resulting bone loss at the distal surface of the distal root of mandibular second molars (MM2) is responsible for the poor stability of MM2. This study aimed to identify the clinical osteogenesis effect of recombinant human bone morphogenetic protein-2 (rhBMP-2)-loaded calcium phosphate cements (CPCs) and rhBMP-2 delivery systems (rhBMP-2/CPCs, named CPCII) on bone loss repair at the distal surface of the MM2 distal root after IMM3 extraction. METHODS: Written informed consent was obtained from every participant whose IMM3 needed extraction. The impact of IMM3 on both sides was basically identical. From April 2014 to March 2016, extraction of IMM3 was performed in 9 patients (5 males/4 females, 26-42 years old). One side was randomly selected as the experimental group, and CPCII systems were implanted into the distal surface of the distal root in dental extraction sockets. The wounds on the other side were sutured and allowed to heal naturally (be treated as the control group). New bone formation in the alveolar fossa was detected 3 and 12 months after the operation by cone-beam computed tomography (CBCT) to measure the distance from the cementoenamel junction (CEJ) to the crest of the alveolar ridge (CAR). RESULTS: The CAR-CEJ distance on the test side was less than that on the control side (P<0.5). CONCLUSION: The quantity of new bone formation in the experimental group was greater than that in the control group. CPCII systems have osteogenic potential in the healing process of tooth extraction sockets.

Comparison of Two Post Preparation Methods in Mandibular Second Molars with a C-shaped Root Canal Configuration.

OBJECTIVE: To compare the reduction of residual dentine thickness of two different post preparation methods on the mandibular second molars with a C-shaped root canal configuration. METHODS: A total of 26 extracted right mandibular second molars with a C-shaped root canal configuration were selected and paired based on similar canal morphology. Each of the paired teeth was randomly allocated to the heat and ultrasonic instruments group (HU group) or Peeso Reamer (Mani, Utsonomiya, Japan) group (PR group) (n = 13) and received post preparation with different instruments after the same endodontic treatment. The reduction of residual dentine thickness and the minimal remaining dentine thickness at the apical sections at 4 or 7 mm below the cementoenamel junction (CEJ) were recorded. The data were analysed using an independent samples t test (α = 0.05). RESULTS: The reduction of residual dentine thickness for the HU group was less than that for the PR group in the two sections. Moreover, at the section 7 mm below the CEJ, the teeth reduction of the distolingual wall in the HU group (0.022 ± 0.007 mm) was significantly lower than that in the PR group (0.101 ± 0.013 mm) (P < 0.01). CONCLUSION: Using heat and ultrasonic instruments to perform post preparation could follow the original canal configuration to save more tooth structure in the remaining root canal wall, minimise the reduction of residual dentine thickness and decrease the incidence of root canal perforation.

Bilaterality and symmetry of c-shaped mandibular second molars in a Mexican Maya and non-Maya population: a CBCT in vivo study / Bilateralidad y simetría de los segundos molares mandibulares en forma de c en una población mexicana Maya y no Maya: estudio in vivo mediante CBCT

SUMMARY: The objective of this study was to evaluate the bilaterality and symmetry in C-shaped mandibular second molars in Mexican Maya and non-Maya populations using cone-beam computed tomography (CBCT). Five-hundred-twenty-five CBCT scans of patients with left and right mandibular second molars were analyzed to determine the prevalence and bilaterality. The teeth were assessed for the presence of C-shaped root canals, according to Fan et al. (2004) criteria. The sample was subdivided by ethnicity, sex, unilateral/bilateral presence, side of the longitudinal groove, and the C-shaped root canal configuration and symmetry, at the cervical, middle, and apical cross- sections of the root. C-shaped mandibular second molars were present in 24.95% of the individuals. Most (60.30%) of those showing this trait had it bilaterally. When comparing by ethnicity, sex, and side, we detected no significant differences. The vast majority (97.33%) presented the groove along the lingual side. The C3 was the most prevalent configuration in the overall sample, while in the Maya group, the C1 was the most common configuration. When analyzed by sex and ethnic group, the non-Maya females tended to deviate from the other groups in terms of bilaterality. Overall, 55.70% of bilateral C-shaped mandibular second molars were also symmetric in the three radicular thirds. The prevalence of C-shaped mandibular second molars was similar to that reported for northernAsian populations, which is consistent with the evolutionary origins of Native American populations. Most of the sample showed bilaterality and half were symmetric. Clinicians must be aware of the ethnic background of their patients and consider the possible variations to do more predictable root canal treatments.

RESUMEN: El objetivo de este estudio fue evaluar la bilateralidad y simetría de los segundos molares mandibulares en forma de C en una población Mexicana Maya y no-Maya mediante tomografía computarizada de haz cónico (CBCT). Material and Métodos: Se analizaron quinientos veinticinco tomografías de pacientes con segundos molares mandibularesderecho e izquierdo para determinar la prevalencia y bilateralidad. Los dientes fueron evaluados según la presencia de conductos en forma de C de acuerdo a los criterios de Fan et al. La muestra fue subdividida por etnicidad, sexo, presencia bilateral/unilateral, lado del surco y configuración y simetría de los conductos en los cortes transversales cervical, medio y apical. Los segundos molares mandibulares en forma de C estuvieron presentes en el 24.95 % de los individuos. La mayoría (60.30%) de los que mostraron este rasgo lo hicieron de forma bilateral. El comparar por etnicidad, sexo y lado, no se encontraron diferencias estadísticamente significativas. La gran mayoría (97.33%) presentó el surco por lingual. C3 fue la configuración más prevalente en la muestra general, mientras que en el grupo Maya el C1 fue la más común. El análisis por sexo y grupo étnico arrojó que las mujeres no Mayas tendieron a desviarse de los otros grupos en términos de bilateralidad. El 55.70% de los segundos molares mandibulares bilaterales fueron simétricos en sus tres tercios radiculares. La prevalencia de los segundos molars mandibulares en forma de C fue similar a la reportada para las poblaciones del norte de Asia, lo cual es consistente con los orígenes evolutivos de las poblaciones nativas americanas. La mayor parte de la muestra presentó el rasgo de forma bilateral y la mitad de éstos fueron simétricos. Los odontólogos deben tomar en cuenta el origen étnico de sus pacientes y considerar las posibles variaciones para realizar tratamientos endodónticos más predecibles.

Association between the presence of distolingual root in mandibular first molars and the presence of C-shaped mandibular second molars: a CBCT study in a Taiwanese population.

OBJECTIVES: The purpose of this study was to assess the prevalence of C-shaped canals in permanent mandibular second molars (SMs) and to determine whether its appearance was associated with the presence of distolingual root (DLR) in permanent mandibular first molars (FMs). METHOD AND MATERIALS: Three hundred and eighty patients were qualified for evaluation of their FMs and SMs using cone beam computed tomography. The prevalence, distribution pattern, external root morphology, and the internal root canal anatomy of the examined molars were recorded and analyzed. Furthermore, the association between the root canal configurations of SMs and the appearance of DLR in FMs was also assessed. RESULTS: The prevalence of SMs with C-shaped root canals was 44.7%. The most common root canal configuration type of the one-rooted SMs with C-shaped anatomy was C3 (45.6%), followed by C2 and C1. The frequency of C-shaped canals in SMs was 45.4% in Non-DLR group, 52.8% in unilateral DLR group, and 33.9% in bilateral DLR group, respectively. Moreover, the prevalence of C-shaped root canals in SMs with the presence of bilateral DLRs in FMs was significantly lowered. CONCLUSION: The association between the presence of DLR in FMs and C-shaped canal configurations in neighboring SMs was surveyed, and the prevalence of C-shaped root canals in SMs with the presence of bilateral DLRs in FMs was found to be significantly lowered.

Examination of the radiographic visibility of the root pulp of the mandibular second molars as an age marker.

Forensic odontologists often confront with conceptually simple medicolegal question of whether an individual is a juvenile or an adult. The demand for additional research into extending dental age estimation methods in late adolescence is never the less, especially in those who have passed 15 years and are suspected older than 18 years. The present research investigated the regressive dental characteristic, i.e. radiographic visibility of the root pulp in mandibular second molars for the purpose of age assessment, especially for determining the age over 18 years. Nine hundred thirty-six orthopantomograms comprised of 436 males and 500 females aged from 14 to 22 years were examined. Descriptive statistics were performed for each stage in both sexes. The correlation statistics revealed that there is a strong, positive correlation between the chronological age and root pulp visibility stages. The analysis revealed that stage 0 occurred first at the age of 14 years in both sexes. Stage 1 first occurred at the age of 14.26 years in females and 14.74 years in males. Stage 2 was first achieved at the age of 18.6 and 15.2 years in males and females, respectively. The suitability of the studied characteristics in mandibular second molars for age estimation could be confirmed but of limited value. The presence of this stage 2 root pulp visibility in male subjects represents a potential criterion for indicating the age over 18 years. In future studies, the pattern of secondary dentin formation in other tooth types should be investigated.

Clinical application of molar uprighting for impacted mandibular second molars / 口腔疾病防治

Objective @#To investigate the effect of the clinical application of molar uprighting in the treatment of impacted mandibular second molars.@*Methods@# A total of 16 cases of impacted mandibular second molars were chosen, and the impacted molars were treated with straight wire appliances and molar uprighting. Before and after treatment, the vertical angle of the molar, the height of the distal buccal tip, the height of the distal buccal tip of the anchorage molar, the depth of the periodontal pocket and the height of the alveolar bone were measured. Moreover, the treatment cycles of the third molar extraction group, the premolar group and the nonextraction group were compared.@*Results @#All impacted molars responded well to treatment. The vertical time of impacted molars was (1.34 ± 0.45) months, (2.20 ± 0.57) months, and (2.30 ± 0.45) months in the third molar extraction group, the premolar extraction group and the nonextraction group, respectively. The treatment time of the third molar extraction group was shorter than that of the other two groups, and the difference was statistically significant (P < 0.05). After treatment, the inclination of impacted second molars increased by (25.94 ± 8.85)°, the elongated distal buccal tip was depressed by (1.00 ± 1.48) mm, the depth of the proximal and middle periodontal pocket of impacted molars decreased by (1.21 ± 1.03) mm, and the height of the alveolar bone of the proximal and middle adjacent surfaces of impacted second molars increased by (4.57 ± 1.45) mm; these differences were statistically significant (P < 0.05). There was no significant difference in the height of the distal buccal tip of the first molar before and after treatment (P > 0.05).@*Conclusion @#Molar uprighting is an efficient, reliable, and convenient method that can shorten the treatment period. Extraction of crowded third molars is beneficial for the vertical and periodontal health of impacted second molars.

Analysis of the root canal configuration and C-shaped canal frequency of mandibular second molars: a cone beam computed tomography study.

BACKGROUND: Mandibular second molars frequently show variation in root canal configurations. The patients with C-shaped canals are quite challenging in dental practice. C-shaped canals have a poor prognosis in terms of debridement, obturation, and restoration. The aim of this study was to investigate the root canal configuration of mandibular second molar teeth and to determine the frequency of C-shaped canals in mandibular second molars. MATERIALS AND METHODS: We designed a retrospective study using cone beam computed tomography (CBCT) images and 256 CBCT images were retrieved from the archived records of Necmettin Erbakan University Faculty of Dentistry, Konya, Turkey. The root canal configurations were evaluated according to Vertucci's classification and C-shaped canal configurations were identified using the method of Fan et al. The frequency in percentages was calculated for C-shaped canals in CBCT scans. RESULTS: Of the 444 mandibular second molars, the most frequent canal morphology in the mesial roots was Vertucci type IV (40.3%), followed by type II (27.5%). The distal roots were predominantly type I (92.9%), followed by types III (3.5%) and II (2.5%). Forty-seven (10.6%) teeth had C-shaped canals. CONCLUSIONS: Clinicians should be concerned about the different types of canal configurations. Knowledge of these anatomical variations will facilitate the endodontic practice.

Root canal morphology and variations in mandibular second molar teeth of an Indian population: an in vivo cone-beam computed tomography analysis.

OBJECTIVES: This study aims to investigate the root canal morphology of permanent mandibular second molars of an Indian population in vivo using cone-beam computed tomography (CBCT) images. METHODS: CBCT images (n = 983; males = 489, females = 494) of untreated, completely developed permanent mandibular second molar teeth were examined. CBCT scans were acquired as part of diagnosis and treatment planning for treatments unrelated to the present study. The number of roots and root canals were recorded. Canal configuration was classified based on Vertucci's and Fan's classifications. RESULTS: The most common configuration was two-root (79.35%) and three-root canals (53.50%). The incidence of three-rooted molars was 7.53%, whereas 13.12% of the studied teeth studied have fused roots with C-shaped canals. The predominant canal morphology in the mesial roots was Vertucci's type IV (45.17%), followed by type II (32.55%), type I (7.23%), type V (1.02%), and type III (0.91%). The distal root in contrast showed type I (61.14%) as the predominant canal configuration, followed by type II (18.21%) and type IV (7.53%). The incidence of three-rooted molars was higher in males (n = 55; 5.59%) than in females (n = 19; 1.94%) (p < 0.01). The canals in the extra roots exhibited type I (100%) root canal morphology. In teeth with C-shaped root canal (13.12%), the variations in the coronal, middle, and apical third ranged from C1 to C4. CONCLUSIONS: Root canal systems of the mesial roots of mandibular second molars of the study population demonstrated a high degree of variability. While three roots were rare, there was a sexual predisposition. Fused roots with C-shaped canals were rare and demonstrated significant variations from the coronal to apical third. CLINICAL RELEVANCE: Root canal morphology can demonstrate variations based on race and sex of patients. Clinicians must always consider the possible variations to ensure successful endodontic treatment.

Saving the 2(nd) Molar from the 3(rd) Is it Really the Guilt of the Tilt?

INTRODUCTION: Clinicians often relate the distal caries in second molars to angulated third molars, which if left undetected can lead to gross decay that may further require removal of the tooth. Due to this fact, many third molars are advised for prophylactic removal to prevent decay in the second molar. But this approach would only be justified when the incidence of decay/loss of second molar due to third molar are reasonably high. We sought to determine incidence of caries experience and also sequel extraction in second molars associated with the third molars. AIM: The study was conducted to answer the basic question that whether the incidence of caries and subsequent extraction of second molar due to angulated third molars is high enough to justify the prophylactic removal of third molar or not. MATERIALS AND METHODS: This study was conducted on radiographic records of 1187 patients. The effect of tilted third molar on the second molar was measured in relation with three parameters namely level & position of third molar with respect to second molar and the distribution among arches. RESULTS: The results indicated that out of total number of teeth examined only 5.4% of maxillary and 9.6% of mandibular second molars were affected by tilted third molars. Further, only 2.2% of mandibular and 2.9% of maxillary second molars were indicated for extraction. The data was statistically insignificant. CONCLUSION: It was concluded that distal caries in second molars is not very common. It may be present in some cases of third molar impactions and prophylactic removal of these impacted teeth may not be considered appropriate.

Analysis of C-shaped canals by panoramic radiography and cone-beam computed tomography: root-type specificity by longitudinal distribution.

INTRODUCTION: The purpose of this study was to document the characteristics of C-shaped canal systems in permanent mandibular second molars using a combination of orthopantomogram (OPT) and cross-sectional cone-beam computed tomographic (CBCT) imaging. METHODS: Two hundred participants (94 men and 106 women, mean age = 35 years) who underwent both routine CBCT and OPT examinations were enrolled. One endodontist and 1 oral radiologist examined the images of 339 mandibular second molars and described the radiographic features of C-shaped canals from OPT images as confirmed by CBCT imaging. Root morphology was classified as nonfused (NFRI-II) or fused (FRI-III) based on OPT images. Cross-sectional root canal configurations (C1-C5) were identified from CBCT imaging at 3 different levels (coronal, middle, and apical). Frequency distributions of root morphology and root canal configurations were compared at each level, and interobserver reliability was tested using the Cohen kappa test. RESULTS: Of the 339 teeth, 29 (8.6 %) had C-shaped root canal systems. Most of the root canals were NFR type (86%); only 2% had C-shaped root canals (all NFRII). In the FR category, 23 teeth with C-shaped canals were equally distributed between the FRI and FRII subtypes. Interobserver agreement was almost perfect (κ = 0.89 and κ = 0.91; right and left second molars, respectively). Per CBCT imaging, the most common configuration was C3 at all levels; no C5 case was detected. CONCLUSIONS: OPT usage can assist in recognizing and diagnosing C-shaped root canal systems. Radicular fusion or proximity is a characteristic feature of C-shaped canal systems. However, nonfused root appearances should also be considered suspicious.

Asymmetry in mesial root number and morphology in mandibular second molars: a case report.

Ambiguity in the root morphology of the mandibular second molars is quite common. The most common root canal configuration is 2 roots and 3 canals, nonetheless other possibilities may still exist. The presence of accessory roots is an interesting example of anatomic root variation. While the presence of radix entomolaris or radix paramolaris is regarded as a typical clinical finding of a three-rooted mandibular second permanent molar, the occurrence of an additional mesial root is rather uncommon and represents a possibility of deviation from the regular norms. This case report describes successful endodontic management of a three-rooted mandibular second molar presenting with an unusual accessory mesial root, which was identified with the aid of multiangled radiographs and cone-beam computed tomography imaging. This article also discusses the prevalence, etiology, morphological variations, clinical approach to diagnosis, and significance of supernumerary roots in contemporary clinical dentistry.

Asymmetry in mesial root number and morphology in mandibular second molars: a case report

Ambiguity in the root morphology of the mandibular second molars is quite common. The most common root canal configuration is 2 roots and 3 canals, nonetheless other possibilities may still exist. The presence of accessory roots is an interesting example of anatomic root variation. While the presence of radix entomolaris or radix paramolaris is regarded as a typical clinical finding of a three-rooted mandibular second permanent molar, the occurrence of an additional mesial root is rather uncommon and represents a possibility of deviation from the regular norms. This case report describes successful endodontic management of a three-rooted mandibular second molar presenting with an unusual accessory mesial root, which was identified with the aid of multiangled radiographs and cone-beam computed tomography imaging. This article also discusses the prevalence, etiology, morphological variations, clinical approach to diagnosis, and significance of supernumerary roots in contemporary clinical dentistry.

Evaluate root and canal morphology of primary mandibular second molars in Chinese individuals by using cone-beam computed tomography.

BACKGROUND/PURPOSE: More detailed knowledge of root and canal morphology is important in order to improve the success in the endodontics of primary teeth. The purpose of this study was to evaluate the root and canal morphology of primary mandibular second molars (PMSMs) in a Chinese population using cone-beam computed tomography (CBCT). METHODS: CBCT images, which had been obtained previously in the West China Hospital of Stomatology at Sichuan University, Chengdu, China between May 2009 and December 2011, were screened retrospectively. Finally, 283 individuals-207 male and 76 female with a mean age of 7.2 years (range 3-10 years)-and 487 PMSMs with clear images of root and canal morphology were enrolled. The number of roots and morphology of canals were recorded. The patient's gender, and the symmetry and frequency of three roots in PMSMs were analyzed. RESULTS: The majority of PMSMs had two (72.28%) or three roots (27.52%). The symmetrical incidence of three-root PMSMs in this Chinese population was 50.65%. There is no difference between genders in the prevalence of an extra root and the incidence of symmetry (p > 0.05). Of the individuals enrolled, 25.26% of PMSMs had three canals and 73.31% had four canals. The root canal systems of the PMSMs in the present study were categorized into seven variants. CONCLUSION: This study indicated that three-rooted PMSMs occur frequently in the Chinese population. There was no difference between the two genders on incidence and symmetry. The majority of PMSMs have three to four canals and the diversity of the root canal variants should be considered when performing clinical procedures. CBCT is a good option for studying the root and canal morphology of primary teeth.

Use of cone-beam computed tomography to evaluate C-shaped root canal systems in mandibular second molars in a Turkish subpopulation: a retrospective study.

AIM: To use cone-beam computed tomography (CBCT) to evaluate the prevalence and anatomical features of C-shaped canals in permanent mandibular second molars amongst members of a Turkish population. METHODOLOGY: An endodontist and oral radiologist examined CBCT images of 271 Turkish mandibular second molars to determine the presence of C-shaped canals and their anatomical features. Root canal configurations at five different levels were categorized using the classification of Fan et al. (Journal of Endodontics, 30, 2004a,b, 899-903; 904-8). Bilateral or unilateral occurrence of C-shaped canals and their relationships with gender, age and tooth position were examined and statistically analysed using the chi-squared test. RESULTS: Of the 271 mandibular second molars examined, 24 (8.9%) molars from 17 patients had a C-shaped root canal system. The prevalence of bilateral C-shaped canals was 6.3% amongst 111 patients with bilateral mandibular second molars. There were no significant differences in the distribution of C-shaped canals with respect to gender or age. Only one tooth had the same canal configuration from the orifice to the apex. In the remainder of the teeth, the cross-sectional canal configuration changed at different levels of the root. CONCLUSIONS: The configuration of C-shaped canals varied along the length of the root. The prevalence of C-shaped canals in mandibular second molars in this Turkish population was lower than in other Asian populations.