A novel electrochemical sensor with NiSx@MoS2 composite for efficient NO2- sensing.

Excess nitrites are potentially threatening to human health, so it is urgent to develop accurate and sensitive methods. The development of sensors can provide early warning of possible hazards and alert people to protect public health. This work presents an NiSx@MoS2-composite with excellent electrochemical activity, representing a key finding for highly sensitive NO2- detection and sensor development. With the assistance of NiSx@MoS2, this electrochemical sensor has excellent quantitative detection performance. It has a wide detection range (0.0001-0.0020 mg/mL) and a low detection limit (1.863*10-5 mg/mL) for NO2-. This electrochemical sensor maintains excellent specificity among numerous interferences, and it completes the accurate detection of different real food samples. Pleasingly, the electrochemical sensor has satisfactory repeatability stability, and potential for practical applications. It would demonstrate tremendous potential in scientific dietary guidance, food safety detection and other fields.

Accelerated Fe3+/Fe2+ cycle in Mo2C-based Fe catalyst to promote peroxymonosulfate activation.

The harmful impact of organic pollutants on aquatic ecosystems underscores the pressing need for effective remediation. While activating peroxymonosulfate (PMS) with Fe catalyst offers a promising approach for eliminating these pollutants, its widespread use is hindered by the sluggish regeneration of Fe2+ from Fe3+. Here, this study demonstrates for the first time that combining an Fe catalyst with Mo2C (Fe-Mo2C) enhances the Fe³âº/Fe2⁺ cycle, thereby improving PMS activation. The Fe-Mo2C/PMS system achieved near-complete degradation of carbamazepine (CBZ) within only 8 minutes, with an impressive observed rate constant (kobs) of up to 0.624 min-1, about 15 times greater than that of Fe-C catalyst. It also exhibits the capability to degrade a broad range of common antibiotics, phenols, and dye-like organic compounds. Through electron paramagnetic resonance (EPR) analysis and quenching experiments, it was verified that hydroxyl radicals (·OH), sulfate radicals (SO4·-), singlet oxygen (1O2), and superoxide radicals (·O2-) species during the reaction, with the former three serving as the primary active species. These findings offer a hopeful avenue for the systematic development and enhancement of catalysts specifically designed to efficiently remediate organic pollutants in wastewater.

Engineering Injectable Coassembled Hydrogel by Photothermal Driven Chitosan-Stabilized MoS2 Nanosheets for Infected Wound Healing.

The application of enzyme-like molybdenum disulfide (MoS2) in tissue repair was confronted with stable dispersion, solubilization, and biotoxicity. Here, the injectable self-healing hydrogel was successfully designed using a step-by-step coassembly of chitosan and MoS2. Polyphenolic chitosan as a "structural stabilizer" of MoS2 nanosheets reconstructed well-dispersed MoS2@CSH nanosheets, which improved the biocompatibility of traditional MoS2, and strengthened its photothermal conversion and enzyme-like activities, guaranteeing highly efficient radical scavenging and antimicrobial properties. Furthermore, the polyphenol chitosan was employed again as a "molecular cross-linking agent" to form the injectable NIR-responsive MoS2@CSH hydrogel by accelerating hydrogen-bond interaction among chitosan and the multicross-linking reaction among polyphenols. The rapid self-healing ability was conducive to wound closure and dynamic adaptability. An experimental study on infected wound healing demonstrated that MoS2@CSH hydrogel could substantially eradicate bacteria and accelerate the angiogenesis of infected wounds. The photothermal-driven coassembly of MoS2 and polycation provided an alternative strategy for infected wound healing.

Impact of Nitrogen-Enriched 1T/2H-MoS2/CdS as an Electrode Material for Hybrid Supercapacitor.

Transition metal chalcogenides (TMX) have attracted energy researchers due to their role as high-performance electrode materials for energy storage devices. A facile one-pot hydrothermal technique was adopted to synthesize a molybdenum disulfide/cadmium sulfide (MoS2/CdS) (MCS) composite. The as-prepared samples were subjected to characterization techniques such as XRD, FT-IR, SEM, TEM, and XPS to assess their structure, morphology, and oxidation states. The MoS2/CdS (MCS) composites were prepared in three different ratios of molybdenum and cadmium metals. Among them, the MCS 1:2 (Mo:Cd) ratio showed better electrochemical performance with a high specific capacitance of 1336 F g-1 (high specific capacity of 185.83 mAh g-1) at a specific current of 1 A g-1 for half-cell studies. Later, a hybrid supercapacitor (HSC) device was fabricated with N-doped graphene (NG) as an anode and MCS (1:2) as a cathode, delivering a high specific energy of 34 Wh kg-1 and a specific power of 7500 W kg-1. The high nitrogen content in the MoS2 structure in MCS composites alters the device's performance, where CdS supports the composite structure through its conductivity and encourages the easy accessibility of ions. The device withstands up to 10 000 cycles with a higher Coulombic efficiency of 97% and a capacitance retention of 90.25%. The high-performance NG//MCS (1:2) HSC may be a potential candidate alternative to the existing conventional material.

Osteogenic and angiogenic potential of molybdenum-containing mesoporous bioactive glass nanoparticles: An ionic approach to bone tissue engineering.

Biomaterials intended for application in bone tissue engineering (BTE) ideally stimulate osteogenesis and angiogenesis simultaneously, as both mechanisms are of critical importance for successful bone regeneration. Mesoporous bioactive glass nanoparticles (MBGNs) can be tailored towards specific biological needs, for example by addition of ions like Molybdenum (Mo). While Mo has been shown to enhance osteogenic differentiation of human bone marrow-derived mesenchymal stromal cells (BMSCs) as well as their ability to form and mature a primitive osseous extracellular matrix (ECM), there are contradictory findings regarding its impact on angiogenesis. In this study, the effects of Mo-MBGNs (mol%: 70 SiO2, 25 CaO, 5 MoO3) on viability, proliferation, osteogenic differentiation, ECM formation and angiogenic response of BMSCs were compared to undoped MBGNs (in mol%: 70 SiO2, 30 CaO) and a control group of BMSCs. Furthermore, a human umbilical vein endothelial cells tube formation assay and a chorioallantoic membrane-assay using fertilized chicken eggs were used to analyze angiogenic properties. Mo-MBGNs were cytocompatible and promoted the proliferation of BMSCs. Furthermore, Mo-MBGNs showed promising osteogenic properties as they enhanced osteogenic differentiation, ECM formation and maturation as well as the gene expression and protein production of relevant osteogenic factors in BMSCs. However, despite the promising outcome on osteogenic properties, the addition of Mo to MBGNs resulted in anti-angiogenic effects. Due to the high relevance of vascularization in-vivo, the anti-angiogenic properties of Mo-MBGNs might hamper their osteogenic properties and therefore might restrict their performance in BTE applications. These limitations can be overcome by the addition of ions with distinct pro-angiogenic properties to the Mo-MBGNs-composition. Due to their promising osteogenic properties, Mo-MBGNs constitute a suitable basis for further research in the field of ionic (growth factor free) BTE.

Removal of aflatoxin M1 in milk using magnetic laccase/MoS2/chitosan nanocomposite as an efficient sorbent.

The current study tries to find the impact of the integration of laccase enzyme (Lac) onto magnetized chitosan (Cs) nanoparticles composed of molybdenum disulfide (MoS2 NPs) (Fe3O4/Cs/MoS2/Lac NPs) on the removal of AFM1 in milk samples. The Fe3O4/Cs/MoS2/Lac NPs were characterized by FT-IR, XRD, BET, TEM, FESEM, EDS, PSA, and VSM analysis. The cytotoxic activity of the synthesized nanoparticles in different concentrations was evaluated using the MTT method. The results show that the synthesized nanoparticles don't have cytotoxic activity at concentrations less than 20 mg/l. The ability of the prepared nanoparticles to remove AFM1 was compared by bare laccase enzyme, MoS2, and Fe3O4/Cs/MoS2 composite, indicating that the Fe3O4/Cs/MoS2/Lac NPs the highest adsorption efficiency toward AFM1. Besides, the immobilization efficiency of laccase with a concentration range of 0.5-2.0 was investigated, indicating that the highest activity recovery of 96.8% was obtained using 2 mg/ml laccase loading capacity. The highest removal percentage of AFM1 (68.5%) in the milk samples was obtained by the Fe3O4/Cs/MoS2/Lac NPs at a contact time of 1 h. As a result, Fe3O4/MoS2/Cs/Lac NPs can potentially be utilized as an effective sorbent with high capacity and selectivity to remove AFM1 from milk samples.

Blood molybdenum level as a marker of cancer risk on BRCA1 carriers.

OBJECTIVE: To investigate whether Molybdenum blood level is a marker of cancer risk on BRCA1 carriers. METHODS: A prospective cohort study was conducted among 989 initially unaffected women with a BRCA1 mutation. Blood samples were collected to measure molybdenum levels, and participants were followed for an average of 7.5 years. Cox proportional hazards models were used to assess the association between blood molybdenum levels and cancer incidence, adjusting for potential confounders. RESULTS: High blood molybdenum levels (> 0.70 µg/L) were significantly associated with an increased risk of developing ovarian cancer (HR = 5.55; 95%CI: 1.59-19.4; p = 0.007) and any cancer (HR = 1.74; 95%CI: 1.17-2.61; p = 0.007) but not breast cancer (HR = 1.46, CI = 0.91-2.33; p = 0.12). The cumulative incidence of ovarian cancer at ten years was 1.2% for the lowest molybdenum tertile, 4.2% for the middle tertile, and 8.7% for the highest tertile. CONCLUSION: Elevated blood molybdenum levels are associated with an increased risk of ovarian cancer on BRCA1 mutation carriers. Lowering molybdenum levels may potentially reduce cancer risk in this population, and high molybdenum levels could serve as a marker for considering preventive oophorectomy in BRCA1 carriers. Further research is warranted to confirm these findings and explore interventions targeting molybdenum levels as a preventive measure for ovarian cancer in BRCA1 mutation carriers.

Positive effects of molybdenum on the biomineralization process on the surface of low-alloy steel catalyzed by Bacillus subtilis.

The adhesion of microorganisms and the subsequent formation of mineralized layers in biofilms are of great significance in inhibiting the corrosion of metal materials. In this work, we found that the adhesion and subsequent mineralization of Bacillus subtilis on the surface of low-alloy steel are influenced by the molybdenum in the material. The addition of molybdenum will lead to increased adhesion of B. subtilis on the material surface, and the subsequent biomineralization ability has also been improved. Through transcriptome and physiological and biochemical tests, we found that molybdenum can affect the chemotaxis, mobility and carbonic anhydrase secretion related genes of B. subtilis, and then affect the formation and mineralization of the biofilm of B. subtilis.

Predicting Non-Mass Breast Cancer Utilizing Ultrasound and Molybdenum Target X-Ray Characteristics.

Objective: The aim of this study is to investigate the influence of ultrasound and molybdenum target X-ray characteristics in predicting non-mass breast cancer. Methods: A retrospective analysis was conducted on the clinical data of 185 patients presenting with non-mass breast lesions between September 2019 and 2021. The non-mass lesions were categorized into benign and malignant types based on ultrasonographic findings, which included lamellar hypoechoic, ductal alteration, microcalcification, and structural disorder types. Furthermore, an examination was undertaken to discern variances in molybdenum target X-ray parameters, ultrasonographic manifestations, and characteristics among individuals diagnosed with non-mass breast lesions. Results: The ultrasonographic depiction of microcalcified lesions and the identification of suspicious malignancy through molybdenum target X-ray evaluation exhibited independent associations with non-mass breast cancer, yielding statistically significant differences (p < 0.05). Subsequently, the logistic regression model was formulated as follows: Logit (P) =-1.757+2.194* microcalcification type on ultrasound + 1.520* suspicious malignancy on molybdenum target X-ray evaluation. The respective areas under the receiver operating characteristic curves for microcalcification type on ultrasound, suspicious malignancy on molybdenum target X-ray, and the integrated diagnostic model were 0.733, 0.667, and 0.827, respectively, demonstrating discriminative capacities. Conclusion: Using both ultrasound and molybdenum target X-ray diagnostics can increase the accuracy of non-mass breast cancer detection. The findings of this study have the potential to augment the detection rate of non-lumpy breast cancer and provide an imaging basis for enhancing the prognosis of individuals with breast cancer.

Regulation of Ir Dopant in Mo Oxides by Flame Spray Pyrolysis for Efficient CO2 Hydrogenation.

Mo carbide is recognized as one of the most promising catalyst for CO2 utilization via reverse water-gas shift (RWGS). However, it always suffered from low processing capacity, undesired products and deactivation. Herein, an Ir modified MoO3 synthesized by the flame spray pyrolysis (FSP) method exhibits higher reaction rate (63.0 gCO2·gcat-1·h-1) compared to the one made by traditional impregnation method (45.8 gCO2·gcat-1·h-1) over the RWGS reaction at 600°C. The distinguishing feature between the two catalysts lies in the chemical state and space distribution of Ir species. Ir species predominated in the bulk phase of MoO3 during the quenching process of the FSP method and were mainly in the metallic states, which revealed by X-ray absorption spectroscopy (XAS), X-ray photoelectron spectroscopy (XPS), and time-of-flight secondary ion mass spectroscopy (ToF-SIMS) characterizations. In contrast, the Ir introduced via impregnation method were mainly on the surface of MoO3 and in oxidized state. The regulation of Ir dopant in MoO3 catalyst by different methods determines the carbonization process to Mo carbides, and thus affects the catalytic performance. This work sheds light on the superiority of the FSP method in synthesizing Mo oxides with heteroatoms and further creating an efficient Mo-based catalyst for CO2 conversion.

Tailoring Pseudo-Graphitic Domain by Molybdenum Modification to Boost Sodium Storage Capacity and Durability for Hard Carbon.

Hard carbon (HC) stands out as the most prospective anode for sodium-ion batteries (SIBs) with significant potential for commercial applications. However, some long-standing and intractable obstacles, like low first coulombic efficiency (ICE), poor rate capability, storage capacity, and cycling stability, have severely hindered the conversion process from laboratory to commercialization. The above-mentioned issues are closely related to Na+ transfer kinetics, surface chemistry, and internal pseudo-graphitic carbon content. Herein, constructing molybdenum-modified hard carbon solid spheres (Mo2C/HC-5.0), both the ion transfer kinetics, surface chemistry, and internal pseudo-graphitic carbon content are comprehensively improved. Specifically, Mo2C/HC-5.0 with higher pseudo-graphitic carbon content provides a large number of active sites and a more stable layer structure, resulting in improved sodium storage capacity, rate performance, and cycling stability. Moreover, the lower defect density and specific surface area of Mo2C/HC-5.0 further enhance ICE and sodium storage capacity. Consequently, the Mo2C/HC-5.0 anode achieves a high capacity of 410.7 mA h g-1 and an ICE of 83.9% at 50 mA g-1. Furthermore, the material exhibits exceptional rate capability and cycling stability, maintaining a capacity of 202.8 mA h g-1 at 2 A g-1 and 214.9 mA h g-1 after 800 cycles at 1 A g-1.

An NIR-responsive hydrogel loaded with polydeoxyribonucleotide nano-vectors for enhanced chronic wound healing.

Chronic diabetic wounds are difficult to treat due to imbalanced inflammatory responses, high blood glucose levels, and bacterial infections. Novel therapeutic approaches based on nucleic acid analogues have been proposed, with unique advantages in improving angiogenesis, increasing collagen synthesis, and exerting anti-inflammatory effects. However, the inherent electronegativity of nucleic acids makes them less susceptible to cellular uptake. In this paper, a kind of near infrared (NIR)-responsive nanocomposite hydrogel loaded with nucleic acid vectors was proposed for promoting wound healing. The redox system composed of molybdenum disulphide nanosheets (MoS2 NSs) initiated the copolymerization of quaternized chitosan containing double bonds and N-isopropylacrylamide (NIPAAm) to form the matrix. In addition, MoS2 NSs with photothermal conversion performance endow the nanocomposite hydrogel to have NIR-response property and act as physical crosslinking points in the matrix. Polydeoxyribonucleotides (PDRN), which have the effect of promoting wound healing, were made into nucleic acid vectors, and loaded into the NIR-responsive hydrogel. MoS2 NSs can convert NIR irradiation into heat, causing phase transitions of temperature-sensitive segments that trigger volume contraction of the hydrogel to extrude the nucleic acid vector. Promoting angiogenesis, slowing inflammation, and guiding tissue regeneration were demonstrated in the diabetic wound model treated with the NIR-responsive nanocomposite hydrogel.

Modern history of hypoxia in Narragansett Bay: The geochemical record.

Increased inputs of nitrogen from agricultural runoff, urbanization and suburbanization have resulted in degradation of water quality, including increased frequency and severity of hypoxia, in estuarine ecosystems. Much work has been conducted in recent years to characterize the spatial and temporal extent of hypoxia in coastal systems, but the historical record of hypoxia in such systems is much less well known. The current work examines the history of hypoxia in upper Narragansett Bay, an urbanized estuary in the northeastern U.S., through vertical profiles of geochemical markers in sediment cores. Concentrations of authigenic molybdenum indicate more frequent/ longer periods of hypoxia that are related to changes in population and anthropogenic inputs to the Bay from the surrounding watersheds. Cores from the urbanized upper bay, greatly affected by wastewater treatment facilities (WWTFs), indicate greater duration of hypoxia in the 20th century, with periods of hypoxia decreasing through mid-century and recurring thereafter. Trends of hypoxia are closely related to improvements and failures of WWTFs in surrounding communities. In Greenwich Bay, with a suburban watershed and only one WWTF, hypoxia increased substantially in parallel with growth of population in the surrounding watershed. Carbon and nitrogen concentrations and isotope values reflect increased nitrogen enrichment and productivity in the Bay in the 2nd half of the 20th century. These results can help inform study of the environmental responses to societal activities that may affect water quality.

Anilines Formation via Molybdenum-Catalyzed Intermolecular Reaction of Ynones with Allylic Amines.

The multi-substituted anilines are widely found in organic synthesis, medicinal chemistry and material science. The quest for robust and efficient methods to construct a diverse array of these compounds using readily accessible starting materials under simple reaction conditions is of utmost importance. Here, we report an unprecedented and efficient approach for the synthesis of 2,4-di and 2,4,6-trisubstituted anilines. With a simple molybdenum(VI) catalyst, a wide range of 2,4-di and 2,4,6-trisubstituted anilines were efficiently prepared in generally good to excellent yields from readily accessible ynones and allylic amines. The synthetic potential of this methodology was further underscored by its applications in several synthetic transformations, gram-scale reactions, and derivatization of bioactive molecules. Preliminary mechanistic studies suggested that this aniline formation might involve a cascade of aza-Michael addition, [1, 6]-proton shift, cyclization, dehydration, 6π-electrocyclization, and aromatization. This novel strategy provided a robust, simple, and modular approach for the syntheses of various valuable di- or trisubstituted anilines, some of which were otherwise challenging to access.

Hive-shaped carbon nanotubes coated with MoSe2as an electrochemical sensor for cholesterol.

The study utilized transition metal chalcogenide, molybdenum diselenide (MoSe2), for application in the field of bioelectrochemical sensing. The MoSe2was combined with carbon nanotubes (CNTs) by chemical vapor deposition to enhance the specific surface area and improve the detection sensitivity. To further increase the contact area between the electrolyte and the electrode, photolithography techniques were employed to fabricate hive-shaped CNTs, thereby enhancing the specific surface area. Next, cholesterol oxidase (ChOx) was coated onto the electrode material, creating a cholesterol biosensor. Cyclic voltammetry was utilized to detect the concentration of cholesterol. The experiment involved segmented testing for cholesterol concentrations ranging from 0µM to 10 mM. Excellent sensitivity, low detection limits, and high accuracy were achieved. In the cholesterol concentration range of 0µM-100µM, the experiment achieved the highest sensitivity of 4.44µAµM⋅cm-2. Consequently, all data indicated that ChOx/MoSe2/CNTs functioned as an excellent cholesterol sensor in the study.

A wearable nanozyme-enzyme electrochemical biosensor for sweat lactate monitoring.

In this study, we developed a wearable nanozyme-enzyme electrochemical biosensor that enablies sweat lactate monitoring. The biosensor comprises a flexible electrode system prepared on a polyimide (PI) film and the Janus textile for unidirectional sweat transport. We obtained favorable electrochemical activities for hydrogen peroxide reduction by modifying the laser-scribed graphene (LSG) electrode with cerium dioxide (CeO2)-molybdenum disulphide (MoS2) nanozyme and gold nanoparticles (AuNPs). By further immobilisation of lactate oxidase (LOx), the proposed biosensor achieves chronoamperometric lactate detection in artificial sweat within a range of 0.1-50.0 mM, a high sensitivity of 25.58 µA mM-1cm-2 and a limit of detection (LoD) down to 0.135 mM, which fully meets the requirements of clinical diagnostics. We demonstrated accurate lactate measurements in spiked artificial sweat, which is consistent with standard ELISA results. To monitor the sweat produced by volunteers while exercising, we conducted on-body tests, showcasing the wearable biosensor's ability to provide clinical sweat lactate diagnosis for medical treatment and sports management.

In-Situ Dynamic Carburization of Mo Oxide with Unprecedented High CO Formation Rate in Reverse Water-Gas Shift Reaction.

In-situ construction of active structure under reaction conditions is highly desired but still remains challenging in many important catalytic processes. Herein, we observe structural evolution of molybdenum oxide (MoOx) into highly active molybdenum carbide (MoCx) during reverse water-gas shift (RWGS) reaction. Surface oxygen atoms in various Mo-based catalysts are removed in H2-containing atmospheres and then carbon atoms can accumulate on surface to form MoCx phase with the RWGS reaction going on, both of which are enhanced by the presence of intercalated H species or Pt-dopants in MoOx. The structural evolution from MoOx to MoCx is accompanied by enhanced CO2 conversion, which is positively correlated with the surface C/Mo ratio but negatively with the surface O/Mo ratio. As a result, an unprecedented CO formation rate of 7544.6 mmol·gcatal-1·h-1 at 600 °C has been achieved over in-situ carbonized H-intercalated MoO3 catalyst, which is even higher than those from noble metal catalysts. During 100 h stability test only a minimal deactivation rate of 2.3% is observed.

Tunable Doping Strategy for Few-Layer MoS2 Field-Effect Transistors via NH3 Plasma Treatment.

Molybdenum disulfide (MoS2) is a promising candidate for next-generation transistor channel materials, boasting outstanding electrical properties and ultrathin structure. Conventional ion implantation processes are unsuitable for atomically thin two-dimensional (2D) materials, necessitating nondestructive doping methods. We proposed a novel approach: tunable n-type doping through sulfur vacancies (VS) and p-type doping by nitrogen substitution in MoS2, controlled by the duration of NH3 plasma treatment. Our results reveal that NH3 plasma exposure of 20 s increases the 2D sheet carrier density (n2D) in MoS2 field-effect transistors (FETs) by +4.92 × 1011 cm-2 at a gate bias of 0 V, attributable to sulfur vacancy generation. Conversely, treatment of 40 s reduces n2D by -3.71 × 1011 cm-2 due to increased nitrogen doping. X-ray photoelectron spectroscopy, Raman spectroscopy, and photoluminescence analyses corroborate these electrical characterization results, indicating successful n- and p-type doping. Temperature-dependent measurements show that the Schottky barrier height at the metal-semiconductor contact decreases by -31 meV under n-type conditions and increases by +37 meV for p-type doping. This study highlights NH3 plasma treatment as a viable doping method for 2D materials in electronic and optoelectronic device engineering.

Clostridioides difficile exploits xanthine and uric acid as nutrients by utilizing a selenium-dependent catabolic pathway.

Selenium is a trace element that plays critical roles in redox biology; it is typically incorporated into "selenoproteins" as the 21st amino acid selenocysteine. Additionally, selenium exists as a labile non-selenocysteine cofactor in a small subset of selenoproteins known as selenium-dependent molybdenum hydroxylases (SDMHs). In purinolytic clostridia, SDMHs are implicated in the degradation of hypoxanthine, xanthine, and uric acid for carbon and nitrogen. While SDMHs have been biochemically analyzed, the genes responsible for the insertion and maturation of the selenium cofactor lack characterization. In this study, we utilized the nosocomial pathogen Clostridioides difficile as a genetic model to begin characterizing this poorly understood selenium utilization pathway and its role in the catabolism of host-derived purines. We first observed that C. difficile could utilize hypoxanthine, xanthine, or uric acid to overcome a growth defect in a minimal medium devoid of glycine and threonine. However, strains lacking selenophosphate synthetase (selD mutants) still grew poorly in the presence of xanthine and uric acid, suggesting a selenium-dependent purinolytic process. Previous computational studies have identified yqeB and yqeC as potential candidates for cofactor maturation, so we subsequently deleted each gene using CRISPR-Cas9 technology. We surprisingly found that the growth of the ΔyqeB mutant in response to each purine was similar to the behavior of the selD mutants, while the ΔyqeC mutant exhibited no obvious phenotype. Our results suggest an important role for YqeB in selenium-dependent purine catabolism and also showcase C. difficile as an appropriate model organism to study the biological use of selenium.IMPORTANCEThe apparent modification of bacterial molybdenum hydroxylases with a catalytically essential selenium cofactor is the least understood mechanism of selenium incorporation. Selenium-dependent molybdenum hydroxylases play an important role in scavenging carbon and nitrogen from purines for purinolytic clostridia. Here, we used Clostridioides difficile as a genetic platform to begin dissecting the selenium cofactor trait and found genetic evidence for a selenium-dependent purinolytic pathway. The absence of selD or yqeB-a predicted genetic marker for the selenium cofactor trait-resulted in impaired growth on xanthine and uric acid, known substrates for selenium-dependent molybdenum hydroxylases. Our findings provide a genetic foundation for future research of this pathway and suggest a novel metabolic strategy for C. difficile to scavenge host-derived purines from the gut.

Doping-Induced Enhancement of Hydrogen Evolution at MoS2 Electrodes.

Rate theory and DFT calculations of hydrogen evolution reaction (HER) on MoS2 with Co, Ni and Pt impurities show the significance of dihydrogen (H2*) complex where both hydrogen atoms are interacting with the surface. Stabilization of such a complex affects the competing Volmer-Heyrovsky (direct H2 release) and Volmer-Tafel (H2* intermediate) pathways. The resulting evolution proceeds with a very small overpotential for all dopants ( η ${\eta }$ =0.1 to 0.2 V) at 25 % edge substitution, significantly reduced from the already low η ${\eta }$ =0.27 V for the undoped edge. At full edge substitution, Co-MoS2 remains highly active ( η ${\eta }$ =0.18 V) while Ni- and Pt-MoS2 are deactivated ( η ${\eta }$ =0.4 to 0.5 V) due to unfavorable interaction with H2*. Instead of the single S-vacancy, the site of intrinsic activity in the basal plane was found to be the undercoordinated central Mo-atom in threefold S-vacancy configurations, enabling hydrogen evolution with η ${\eta }$ =0.52 V via a H2* intermediate. The impurity atoms interact favorably with the intrinsic sulfur vacancies on the basal plane, stabilizing but simultaneously deactivating the triple vacancy configuration. The calculated shifts in overpotential are consistent with reported measurements, and the dependence on doping level may explain variations in experimental observations.