Comparing the Efficacy of 5% EMLA Cream and 20% Benzocaine Gel on Gingival Tissue Surrounding Non-Carious Cervical Lesions for Reduction of Pain Following Rubber Dam Clamp Placement: A Split-Mouth Randomized Clinical Trial.

Aim The aim of this study was to evaluate the effectiveness of 5% eutectic mixture of local anesthetics (EMLA) cream and 20% benzocaine gel in reduction of pain during rubber dam clamp placement in the treatment of non-carious cervical lesions (NCCLs). Methodology In this split-mouth single-blind randomized clinical trial, 50 adult participants were selected from the outpatient department. The test group was treated using 5% EMLA cream for three minutes, and visual analog scale (VAS) scores were recorded. The comparison group was treated using 20% benzocaine gel and procedure was repeated as that in the test group. After recording the VAS scores, NCCLs in both the groups were restored using composite restoration. Results In the included 50 participants, 70% were males, with an age group of 31-67 years. The mean VAS score at 3 minutes in EMLA group was significantly lower than that in benzocaine group. Conclusion Application of 5% EMLA cream for 3 minutes showed greater pain reduction during rubber dam clamp placement as compared to 20% benzocaine gel in adult patients with NCCLs.

Noncarious cervical lesions: A bibliometric analysis and future research trends.

OBJECTIVE: The present bibliometric review analyzed the literature on non-carious cervical lesions (NCCLs) to explore the current state and propose future research topics. DATA: An electronic search was performed, only full scientific papers published in English were included. SOURCES: A search was conducted of all databases in the Web of Science (WOS) platform for available publications on the topic of NCCLs. STUDY SELECTION: 959 publications were retrieved, and the following data were extracted and analyzed: number of publications, study topics, keywords, study type, authors, affiliations, countries, funding agencies, journals and citations. Articles on NCCLs have been increasing in count, ever since they were first mentioned in the literature. Therapy alternatives account for 628 with few on prevention, and the majority were clinical. Brazil has published the most on NCCLs as well as has the highest number of authors and the most funded articles. The three journals that published the most on the topic were Operative Dentistry, Journal of Dentistry and Clinical Oral Investigations. CONCLUSION: The findings of this study provide a full picture of the current literature on NCCLs, research trends, knowledge gaps, and areas requiring further investigation. CLINICAL SIGNIFICANCE: By highlighting evolving treatment strategies and potential gaps in prevention, researchers can contribute to the advancement of clinical practice. This can improve patient care and outcomes in the management of NCCLs, while also providing valuable insights for policymakers to prioritize research funding and policy initiatives.

Polishing methods for composites restoration: the influence on human gingival fibroblasts behaviour.

BACKGROUND: Carious/Non-carious cervical lesions with gingival recessions may require both dental and periodontal reconstructive therapy, where flaps/grafts may be placed in contact with a dental filling material. Human Gingival Fibroblasts (HGF-1) response during the early phase of healing could vary according to the procedures employed to cure the dental composite. Moreover, oxygen diffusion into dental composite inhibits the polymerization reaction, creating an oxygen-inhibited layer (OIL) that presents residual unreacted monomers. The aim of this study was to assess the effect of different polishing techniques and OIL on HGF-1. METHODS: Composite discs polished with different techniques (diamond rubber, abrasive discs and tungsten carbide burr) were used. An additional not polished smooth group obtained with and without OIL was used as control. Samples were physically characterized through the analysis of their hydrophilicity and surface topography through contact angle measurement and SEM, respectively; afterwards the biologic response of HGF-1 when cultured on the different substrates was analyzed in terms of cytotoxicity and gene expression. RESULTS: The finishing systems caused alterations to the wettability, even if without a proportional relation towards the results of the proliferation essay, from which emerges a greater proliferation on surfaces polished with one-step diamond rubber and with abrasive discs as well as a direct effect of the glycerin layer, confirming that surface roughness can heavily influence the biological response of HGF-1. CONCLUSIONS: Surfaces wettability as well as cellular behavior seem to be affected by the selection of the finishing system used to lastly shape the restoration. Especially, the presence of OIL act as a negative factor in the regards of human gingival fibroblasts. The present study may provide the first clinical instruction regarding the best polishing system of composite material when the restoration is placed directly in contact with soft tissue cells. Understanding HGF-1 behavior can help identifying the polishing treatment for direct restoration of carious/non-carious cervical lesions associated with gingival recessions.

Root coverage with the restoration of non-carious cervical lesions: A systematic review and meta-analysis.

The progression of non-carious cervical lesions (NCCLs) leads to gingival recession (GR), which is restored with restorative materials, using different periodontal plastic surgery procedures. There is no consensus on which technique is superior to others. Therefore, the present systematic review aimed to assess the effectiveness of root coverage (RC) procedures in the restored and unrestored NCCLs in terms of clinical and patient-centered outcomes.We used the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) while searching 5 databases in addition to the gray literature. The Medical Subject Headings (MeSH) terms and keywords in the title and abstract fields, as well as in headings, were used to search the existing literature for the relevant publications on the effectiveness of RC procedures with the restoration of NCCLs over the past 3 decades (January 1990-July 2021). After applying the inclusion and exclusion criteria, 13 articles were read in full and critically analyzed. The quality analysis was performed using the Cochrane RevMan software.A total of 222 potentially relevant titles and abstracts were found after the initial electronic and manual search, and after removing duplicates. Applying the inclusion and exclusion criteria yielded 23 publications that were further analyzed for relevance and applicability. Following critical analysis, 13 publications were used for validity assessment and data extraction.In the teeth with NCCLs and GR, the restoration of NCCLs does not affect the percentage RC. However, it significantly decreases dentin hypersensitivity, and the patients' perception of esthetics and satisfaction.

Effects of occlusal wear on 16-year progression of non-carious cervical lesions-Results of the study of health in Pomerania (SHIP-START).

BACKGROUND: It is still discussed whether occlusal wear (OW) affects the formation of non-carious cervical lesions (NCCLs). OBJECTIVE: To estimate effects of OW on the presence and development of NCCLs, using 16-year follow-up data from a cohort study. METHODS: Occlusal and cervical defects were measured in 728 cast models (one from the upper jaw and one from the lower jaw) of 364 participants. Adjusted mixed-effects ordinal logistic models analysing estimated cross-sectional (N = 1308 teeth/291 subjects) and longitudinal (N = 718 teeth/226 subjects) associations of OW with NCCLs using tooth level data. RESULTS: OW size was cross-sectionally (OR = 1.74; 95% CI: 1.27-2.38 for OW size; OR = 0.97; 95% CI: 0.94-0.99 for squared OW size), but not longitudinally (OR = 1.14; 95% CI: 0.99-1.30) associated with odds of higher NCCL sizes. For cross-sectional analyses, predicted probabilities of an NCCL size of 0 decreased from about 0.996 to 0.010 for OW sizes of 0 to 25. CONCLUSION: Results suggest an association between OW and NCCL size. However, as longitudinal results were non-significant, while consistent in direction, large-scaled cohort studies are demanded to more precisely estimate effect strength.

Sixty-month comperative evaluation of a glass hybrid restorative and a composite resin in non-carious cervical lesions of bruxist individuals.

OBJECTIVE: To compare the clinical performance of a glass hybrid (GH) restorative and a nano-ceramic composite resin (CR) in the restoration of non-carious cervical lesions (NCCLs) of bruxist individuals in a 60-month randomized clinical trial. MATERIALS AND METHODS: Twenty-five bruxist candidates having NCCLs were recruited in this clinical study. The depth, height (cervico-incisal), width (mesio-distal), internal angles of the NCCLs, degree of tooth wear (TWI) and gingival index (GI) were measured. One hundred-and-forty-eight NCCLs were restored either with a GH restorative (Equia Forte Fil) or a CR (Ceram.X One Universal). Modified USPHS criteria was used to evaluate restorations after 1 week and 12, 24, 36 and 60 months. Pearson's Chi-Square, Fisher's Exact and Cochran Q tests were run for analysis. Survival rates of the restorations were compared with Kaplan-Meier analysis (p < 0.05). RESULTS: After 60 months, 97 restorations in 15 patients were examined. The recall rate was 60.0%. Retention rates were 73.5% for CR and 66.7% for GH. A total of 29 restorations were lost (13CR (26.5%), 16GH (33.3%)). There was not a significant difference between tested restoratives in retention (p = 0.464), marginal adaptation (p = 0.856) and marginal discoloration (p = 0.273). There was no relationship between internal angle, depth, height or width and retention of the GH or CR restorations (p > 0.05). The increase in retention loss and marginal discoloration of both restorations over time were significant (p < 0.001). Sensitivity or secondary caries were not detected after 60 months. CONCLUSION: GH and nano-ceramic CR showed similar clinical performances in NCCLs after 60 months in patients with bruxism. CLINICAL SIGNIFICANCE: After 60 months, CR and GH materials showed clinically acceptable performances in restoration of NCCLs in patients with bruxism.

Prolonged application time effects on universal adhesives in non-carious cervical lesions: An 18-month split mouth randomized clinical trial.

OBJECTIVE: This double-blind, split mouth randomized clinical trial aimed to assess the clinical performance of Clearfil Universal Bond Quick (CBUq) universal adhesive under different application times (no waiting and waiting) compared to Clearfil SE Bond adhesive in non-carious cervical lesions (NCCLs) over 18 months. METHODS: One hundred and eighty-three restorations were distributed randomly into three groups based on the adhesive system and waiting time: CUBq without waiting time (CUBq-NW), CUBq with a 20 s waiting time (CUBq-W), and CSE with a 20 s waiting time. After placement, restorations were evaluated after 18 months using the International Dental Federation (FDI) and United States Public Health Service (USPHS) criteria. Statistical analyses involved Friedman repeated measures analysis of variance and Wilcoxon tests, with a significance level set at 5 %. RESULTS: Over the 18-month period, no restorations were lost across the tested groups. Marginal adaptation evaluation indicated minor discrepancies in 21 restorations (8 CUBq-NW, 6 CUBq-W, and 7 CSE). There were no significant differences observed among the three groups following the 18-month clinical assessment (p > 0.05). Only two restorations showed marginal discoloration after 18 months (1 CUBq-NW and 1 CSE). CONCLUSIONS: The application of Clearfil Universal Bond Quick using either the "waiting" or "no-waiting" technique exhibited excellent clinical results in NCCLs during the 18-month follow-up period, demonstrating comparable performance to Clearfil SE Bond in all assessed outcomes. CLINICAL SIGNIFICANCE: The findings suggest that the new universal adhesive applied using the no-waiting technique demonstrates promising clinical performance when compared to conventional application methods. TRIAL REGISTRATION: ClinicalTrials.gov identifer RBR-69p7mpr.

Stereomicroscopic Aspects of Non-Carious Cervical Lesions.

Non-carious cervical lesions (NCCLs) represent a form of tooth wear, characterized by the irreversible loss of dental hard tissues at the enamel-cement junction, without the involvement of caries and dental trauma. The aim of this study was to highlight the morphological elements of NCCLs via their stereomicroscopic examination and to confirm the role of this examination in the diagnosis of early lesions. In addition, the association between the morphological aspects identified during the stereomicroscopic examination of NCCLs and their etiological factors was determined. For this study, extracted teeth with NCCLs were examined with a stereomicroscope. The morphological aspects of NCCLs were evaluated at magnifications up to 75×. In wedge-shaped NCCLs, the stereomicroscopic examination allowed the identification and measurement of scratches, furrows and cracks. In saucer-shaped NCCLs, the stereomicroscopic examination highlighted the smooth appearance of the walls. The presented study highlighted the role of stereomicroscopic examination in the assessment of NCCL morphology and in their early diagnosis. The study confirmed, in particular, the role of occlusal overloads and tooth brushing in determining the morphology of NCCLs.

Lesiones cervicales no cariosas: una revisión sistemática / Non carious cervical lesions: a systematic review

Introducción: las lesiones cervicales no cariosas (NCCL, por sus siglas en inglés) son un grupo de lesiones que afectan el área cervical del órgano dental causando hipersensibilidad dentinaria y defectos estéticos. Objetivo: analizar la literatura sobre las lesiones cervicales no cariosas, su etiología, consideraciones anatómicas, características morfológicas de la lesión y tratamientos no restaurativos. Material y métodos: se realizó una búsqueda en la base de datos PubMed, utilizando las palabras clave: non-carious cervical lesions OR noncarious cervical lesions OR tooth wear OR tooth erosion OR dental abfraction OR abfraction, recopilando un total de 78 artículos. Resultados: es necesario determinar la etiología antes de seleccionar las estrategias de tratamiento para las lesiones cervicales no cariosas. Conocer los distintos tipos de tejidos que componen al órgano dentario facilita la comprensión de los factores que participan en el desarrollo de las lesiones cervicales no cariosas. Esto permite que el tratamiento se enfoque más en la causa del problema que en los síntomas. Con esto podemos modificar diversos factores de manera interceptiva, los tratamientos de terapia con láser y compuestos tópicos son una estrategia mínimamente invasiva. Conclusiones: la mejor manera de describir a las lesiones cervicales no cariosas sería como una enfermedad multifactorial. Se debe prestar especial atención en los métodos de diagnóstico, identificando cofactores que propicien el avance de la lesión, como son la fricción y la biocorrosión. Esta revisión brinda datos que asocian a los factores oclusales como una de las principales causas de una enfermedad que afecta a más de la mitad de la población adulta (AU)

Introduction: non-carious cervical lesions (NCCL) are a group of lesions that affect the cervical area of the dental organ causing dentin hypersensitivity and cosmetic defects. Objective: to know, through a systematic review, the current state of non-carious cervical lesions. Material and methods: a search was conducted in the PubMed database, using the keywords: non-carious cervical lesions OR noncarious cervical lesions OR tooth wear OR tooth erosion OR dental abfraction OR abfraction, compiling a total of 78 articles. Results: determining etiology is necessary before selecting treatment strategies for non-carious cervical lesions (NCCL). Know the different types of tissues that make up the dentary organ, facilitate the understanding of the factors involved in the development of noncarious al cervical lesions. This allows treatment to focus more on the cause of the problem than on symptoms. With this we can modify various factors in an interceptive way, laser therapy treatments and topical compounds, are a minimally invasive strategy. Conclusions: the best way to describe non-carious al cervical lesions would be as a multifactorial disease to which special attention should be paid to both diagnostic methods, identifying cofactors that promote the progression of injury, such as friction and biocorrosion. This review provides data that associates occlusal factors as one of the main causes of a disease that affects more than half of the adult population (AU)

Fourteen-year Clinical Performance of a HEMA-free One-step Self-etch Adhesive in Non-carious Cervical Lesions.

PURPOSE: This randomized controlled trial aimed to evaluate the 14-year clinical performance of a HEMA-free 1-step self-etch adhesive (1SEa) compared with that of a 3-step etch-and-rinse adhesive (3E&Ra). MATERIALS AND METHODS: 267 non-carious cervical lesions in 52 patients were restored with the microhybrid composite Gradia Direct (GC), bonded in random order either with the HEMA-free 1SEa G-Bond (GB; GC) or the 3E&Ra Optibond FL (OFL; Kerr), which is considered the gold-standard E&Ra (control). The restorations were followed over 14 years for retention, marginal adaptation and discoloration, and caries occurrence. Statistical analysis involved a logistic regression model with generalized estimating equations (2-way GEE model). RESULTS: The patient recall rate at 14 years was 63%. In total, 79 restorations (39 GB, 40 OFL) failed because of retention loss (GB: 19.4%, OFL: 19.6%), severe marginal defects, discoloration and/or caries (GB: 21.7%; OFL: 22.5%). The overall clinical success rate was 58.9% and 57.9% for GB and OFL, respectively. The number of restorations with an unacceptable marginal defect (GB: 14.5%; OFL: 19.2%) and deep marginal discoloration (GB: 18.2%; OFL: 13.2%) increased during the last 5 years. No significant difference in overall clinical performance was recorded between the two adhesives (p > 0.05). Changes in the medical health of some patients and recurrence of abrasion/erosion/abfraction increased the failure rate and retention rate. CONCLUSION: After 14 years, restorations bonded with the HEMA-free 1SEa performed as well as those bonded with the 3E&Ra gold standard. Unacceptable marginal deterioration was the main reason for failure, followed by loss of retention.

Conservative Treatment of Dental Non-Carious Cervical Lesions: A Scoping Review.

This scoping review aims to evaluate methods of conservative reconstruction of dental enamel lesions resulting from abrasions and evaluate the effect of diode laser in reducing the symptoms of tooth sensitivity. The cementoenamel junction is more prone to substance loss because the enamel thickness is substantially decreased, resulting in a much weaker enamel-dentin bond. METHODS: Dental abrasion was examined in the mechanical cause alone. Pubmed, Scopus, and Web of Science were used to discover publications that matched our topic from 1 January 2018 to 20 March 2023. A comparison of various non-carious cervical lesion (NCCL) restoration treatments was generated mostly by mechanical considerations. RESULTS: A final number of 11 clinical trials and randomized controlled trials were included in the review for qualitative analysis. Composite resins performed well in clinical trials for the restoration of NCCLs. CONCLUSIONS: Composite, in its different forms of filling and consistency, preceded by the use of adhesives, is an efficient and effective material for the treatment of NCCLs. Diode laser use prior to NCCL restoration of teeth does not diminish restoration retention rate, may lessen hypersensitivity, and may affect restoration success.

Three-year Clinical Performance of a Universal Adhesive in Non-Carious Cervical Lesions.

PURPOSE: The aim of this randomized controlled clinical trial was to evaluate the 3-year clinical performance of a universal adhesive (Clearfil Universal Bond Quick (CUBQ); Kuraray Noritake) when restoring non-carious cervical lesions (NCCLs) using two different application modes (etch-and-rinse vs self-etch with prior selective enamel etching). MATERIALS AND METHODS: Fifty-one patients participated in this study. A total of 251 NCCLs (n = 251) were assigned to two groups: 1) CUBQ applied in etch-and-rinse mode (n = 122; CUBQ-ER) and 2) CUBQ applied in self-etch mode with prior selective etching of enamel with phosphoric acid (n = 129; CUPQ-SEE). The same resin composite, Clearfil Majesty ES-2 (Kuraray Noritake), was used for all restorations. The restorations were evaluated at baseline, 1 and 3 years using FDI criteria: marginal staining, fracture and retention, marginal adaptation, post-operative sensitivity and recurrence of caries. Statistical analysis was performed using a logistic regression model with generalized estimating equations (2-way GEE model). RESULTS: The patient recall rate at 3 years was 90%. After 3 years, both groups presented an increase in the percentage of small but still clinically acceptable marginal defects (CUBQ-ER: 67%, CUBQ-SEE: 63.2%) and marginal staining (CUBQ-ER: 32.6%, CUBQ-SEE: 31.7%). The overall success rate was 82.6% and 83.8% for CUBQ-ER and CUBQ-SEE, respectively. In total, 38 restorations (19 CUBQ-ER, 19 CUBQ-SEE) failed because of loss of retention, fracture, severe marginal defect and/or marginal discoloration. A retention rate of 87.2% and 86.3% was recorded for CUBQ-ER and CUBQ-SEE, respectively. No significant difference was observed between the two bonding-mode groups for any of the evaluated parameters. CONCLUSION: After 3 years of clinical service, Clearfil Universal Bond Quick performed similarly in etch-and-rinse and self-etch modes with prior selective enamel etching.

Morphological and Optical Coherence Tomography Aspects of Non-Carious Cervical Lesions.

Non-carious cervical lesions (NCCLs) are considered the irreversible losses of dental hard tissues at the cemento-enamel junction, in the absence of acute trauma and dental caries. The aim of this study was to highlight the presence of NCCLs in cervical areas based on specific macroscopic aspects in order to establish their clinical form, size and location and to confirm the role of optical coherence tomography (OCT) examination in the early diagnosis of these lesions. For this study, 52 extracted teeth were used, which did not have endodontic treatments, fillings or carious lesions in the cervical area. All teeth were examined macroscopically and OCT was used to evaluate the degree of occlusal wear, the presence and clinical form of NCCLs. Most NCCLs were identified on the buccal surfaces of the premolars. The most frequently encountered clinical form was the wedge-shaped form, with a radicular location. NCCLs present most frequently in the wedge-shaped form. Teeth that presented several NCCLs were identified. The OCT examination is an adjunct method to evaluate the clinical forms of NCCL.

Five-year clinical evaluation of universal adhesive applied following different bonding techniques: A randomized multicenter clinical trial.

OBJECTIVES: To evaluate the clinical performance of a universal adhesive system (Futurabond U, Voco) when applied following different adhesive strategies in non-carious cervical lesions (NCCLs) after 5 years. METHODS: Fifty participants were included. Futurabond U (Voco) was applied in NCCLs using four adhesive strategies (n = 50 each): only self-etch (SE); selective enamel etching + self-etch (SET + SE); etch-and-rinse with dry dentin (ERD); and etch-and-rinse with wet dentin (ERW). All cavities were restored with Admira Fusion composite resin (Voco). Restorations were evaluated after 1, 3, and 5 years using the World Federation criteria (FDI) and the modified United States Public Health Service (USPHS) criteria. RESULTS: After 5 years, retention rates were 81 % (65.8-90.5) for SE, 87 % (73.2-94.4) for SET + SE, 84 % (69.6-92.6) for ERD, and 78 % (63.6-88.9) for ERW (p > 0.05). Thirty-five restorations were considered to have minor discrepancies in marginal adaptation at the 5-year recall (14 for SE, 9 for SET + SE, 6 for ERD, and 6 for ERW; p > 0.05). Sixteen restorations were detected as a minor marginal discoloration (6 for SE, 4 for SET + SE, 1 for ERD, and 5 for ERW; p > 0.05) and one restoration showed a recurrence of caries (1 for ERW; p > 0.05) at the 5-year recall. No restorations showed postoperative sensitivity after 5 years. SIGNIFICANCE: NCCLs restorations using a universal adhesive showed satisfactory clinical performance after 5 years, regardless of the adhesive strategy.

12 Month's Assessment Of Clinical Efficacy Of Resin Modified Glass Ionomer Cement And Flowable Composites In Restoration Of Non-Carious Cervical Lesions, A Randomized Clinical Trial.

Background: The objective of this study was to compare the clinical efficacy of Resin modified glass ionomer cement and Flowable composite in terms of retention, marginal adaptation and surface texture using United States Public Health Service criteria in non-carious cervical lesions measured over a period of one year. Methods: A Randomized Clinical Trial is conducted with Informed consent on 60 patients who are randomly allocated into 2 groups with at least 2 Non Carious Cervical Lesions in each. Group 1 is used for Flowable Composite while group 2 is used for resin modified glass ionomer cement. A recall is maintained to draw conclusions between two materials in terms of occurrence of marginal adaptation, retention and surface texture, to show which material is superior to other. Results: Out of 30 restorations in 12 months follow up, only 19 found to be present in flowable composite group while in resin modified glass ionomer cement group, 28 are retained. Regarding margin integrity, Group 1 showed 21 intact margins whereas 23 margins were intact in group 2, while 18 and 25 showed smooth surface in flowable composite and Resin modified glass ionomer cement group respectively, on exploration. Conclusion: It can be concluded from our study that Resin modified glass ionomer cement is superior to Flowable composite in terms of retention (p=0.005) and surface texture (p=0.045) in restoration of non carious cervical lesion.

Effect of an additional bonding resin on the 5-year performance of a universal adhesive: a randomized clinical trial.

OBJECTIVES: To evaluate the effect of the application of an additional hydrophobic bonding resin on the clinical performance of a universal adhesive applied in etch-and-rinse (ER) or self-etch adhesive (SE) strategy in non-carious cervical lesions (NCCLs) after 5 years. MATERIALS AND METHODS: Scotchbond Universal Adhesive (3M Oral Care) was applied in 134 NCCLs of 39 subjects using different adhesion approaches: 3-step ER (3-ER), 2-step ER (2-ER), 2-step SE (2-SE), and 1-step SE (1-SE). Enamel and dentin were acid etched prior to application of the universal adhesive for the 3-ER and 2-ER groups. An extra layer of a hydrophobic bonding resin was applied for groups 3-ER and 2-SE. All lesions were restored with Filtek Supreme XTE resin composite (3M Oral Care). Restorations were evaluated at baseline and at 5 years using the modified USPHS criteria. Mann-Whitney U and Wilcoxon tests were performed, and the survival rates (retention/fracture) were analyzed using Kaplan-Meier and log-rank tests (p < 0.05). RESULTS: The recall rate was 66.7% at 5 years. The cumulative survival rate was 96.9% for 3-ER, 96.8% for 2-ER, 71.4% for 2-SE, and 81.3% for 1-SE strategies. The log-rank test was statistically significant (p = 0.006). Retention rates were 100% for both ER groups, 75% for 2-SE and 81.3% for 1-SE. At 5 years, 2- and 1-SE approaches showed similar retention rates, but lower than those for 3- and 2-ER. A significant decrease in retention rate was detected for 2-SE (p = 0.007) and 1-SE (p = 0.014) groups between baseline and 5 years. All groups, except 2-ER, showed an increase in marginal discoloration. For this parameter, significant differences were detected between 2-ER and 1-SE (p = 0.004). CONCLUSIONS: The addition of a hydrophobic bonding resin to the recommended application sequence of Scotchbond Universal Adhesive did not improve its clinical performance in NCCLs after 5 years. Higher retention rates were measured when this adhesive was applied in ER mode. TRIAL REGISTRATION: This manuscript is a 5-year follow-up of a randomized clinical trial that started in 2012 when there was no strong recommendation for registration in clinicaltrials.gov. The results after 36 months of clinical service were previously published in this journal.

Grado de microfiltración en ionómero de vidrio y resina compuesta nanoparticulada en lesiones cervicales no cariosas / Degree of microleakage in glass ionomer and nanoparticulate composite resin in non-carious cervical lesions

Introducción: El grado de microfiltración en el ionómero de vidrio y la resina compuesta nanoparticulada en lesiones cervicales no cariosas es de gran importancia para elegir el material restaurador más adecuado para cada caso clínico. Objetivo: Describir el grado de microfiltración en ionómero de vidrio y resina compuesta nanoparticulada en lesiones cervicales no cariosas. Métodos: Se realizó una revisión bibliográfica, correspondiente al nivel exploratorio, en busca de responder cinco preguntas científicas sobre el tema. Se identificaron 62 artículos de las bases de datos de Google Académico o Scopus entre 2015 y 2022. Resultados: Los estudios consultados sugieren que la resina compuesta nanoparticulada es una opción de restauración efectiva y estética en odontología, especialmente en casos de cavidades de alta carga mecánica y estética dental. Los estudios de casos que se revisan demuestran que el grado de microfiltración en las lesiones cervicales no cariosas puede ser significativamente mayor en las restauraciones con ionómero de vidrio en comparación con las resinas compuestas nanoparticuladas. Conclusiones: Se concluye que el elemento fundamental en el tratamiento es realizar un correcto diagnóstico, determinando las necesidades para mejorar la salud dental y realizar una correcta planificación, por lo que es necesario conocer los diferentes tipos de tratamientos con la finalidad de seleccionar el más adecuado, que cumpla con las características biológicas, mecánicas y estéticas, ya que uno de los objetivos fundamentales de cualquier tratamiento es devolver la función y la estética de modo satisfactorio y con la mayor durabilidad posible.

Introduction: The degree of microleakage in glass ionomer and nanoparticulated composite resin in non-carious cervical lesions is of great importance for choosing the most suitable restorative material for each clinical case. Objective: To describe the degree of microleakage in glass ionomer and nanoparticulated composite resin in non-carious cervical lesions. Methods: A literature review, corresponding to the exploratory level, was carried out to answer five scientific questions on the subject. Sixty-two articles were identified from Academic Google or Scopus databases between 2015 and 2022. Results: The studies consulted suggest that nanoparticulated composite resin is an effective and esthetic restorative option in dentistry, especially in cases of cavities with high mechanical load and dental esthetics. The case studies reviewed demonstrate that the degree of microleakage in non-carious cervical lesions can be significantly higher in glass ionomer restorations compared to nanoparticulated composite resins. Conclusions: It is concluded that the fundamental element in treatment is to carry out a correct diagnosis, determining the needs to improve dental health and to carry out correct planning, so it is necessary to know the different types of treatments with the aim of selecting the most suitable one, which complies with the biological, mechanical and esthetic characteristics, since one of the fundamental objectives of any treatment is to restore function and esthetics in a satisfactory way and with the greatest possible durability.

Effect of partial restorative treatment on stress distributions in non-carious cervical lesions: a three-dimensional finite element analysis.

BACKGROUND: Partial restoration combined with periodontal root coverage surgery can be applied to the treatment of non-carious cervical lesions (NCCLs) accompanied with gingival recessions in clinical practice. However, the feasibility of NCCL partial restorative treatment from a biomechanical perspective remains unclear. This study aimed to investigate the effect of partial restorations on stress distributions in the NCCLs of mandibular first premolars via three-dimensional finite element analysis. METHODS: Three-dimensional finite element models of buccal wedge-shaped NCCLs in various locations of a defected zenith (0 mm, 1 mm, and 2 mm) were constructed and divided into three groups (A, B, and C). Three partially restored NCCL models with different locations of the lower restoration border (1 mm, 1.5 mm, and 2 mm), and one completely restored NCCL model were further constructed for each group. The following restorative materials were used in all restoration models: composite resin (CR), glass-ionomer cement (GIC), and mineral trioxide aggregate (MTA). The first principal stress distributions under buccal oblique loads of 100 N were analyzed. Restoration bond failures were also evaluated based on stress distributions at dentin-restoration interfaces. RESULTS: When the partial restoration fully covered the defected zenith, the first principal stress around the zenith decreased and the maximum tensile stress was concentrated at the lower restoration border. When the partial restoration did not cover the defected zenith, the first principal stress distribution patterns were similar to those in unrestored models, with the maximum tensile stress remaining concentrated at the zenith. As the elastic modulus of the restorative material was altered, the stress distributions at the interface were not obviously changed. Restoration bond failures were not observed in CR, but occurred in GIC and MTA in most models. CONCLUSIONS: Partial restorations that fully covered defected zeniths improved the stress distributions in NCCLs, while the stress distributions were unchanged or worsened under other circumstances. CR was the optimal material for partial restorations compared to GIC and MTA.

X-ray microtomography analysis of gaps and voids in the restoration of non-carious cervical lesions with different composite resins.

Context (Background): Resin composites are the most widely used material for restoring cervical defects. However, the high failure rate of these restorations is still a concern. Aims: The aim of this in vitro study was to evaluate, using microtomography (µCT), the interfacial gap and voids formation in Class V cavities in premolars restored with materials with lower polymerization shrinkage combined with different restorative techniques. Settings and Design: Cervical defects were created in 30 intact premolar and were randomly distributed to be restored by one of the following techniques (n = 6): Composite resin with two increments (CR), organic modified polymer (ORMOCER) with single (OR1) or two increments (OR2, or low viscosity bulk-fill composite resin with single (BF1) or two increments (BF2). Methods and Material: Each tooth was scanned before filling to determine the volume of interest (VOI) to be applied in the second µCT after restoration and to control the cavity volume among the groups. In the µCT after filling, the volume of interfacial gaps and voids was calculated for each group. Statistical Analysis: The groups were compared using one-way and Tukey HSD post hoc test (α = 0.05). Results: It was possible to identify higher gap formation in the OR1 group and higher void formation in CR group (P < 0.05). OR2 group showed better results than the group with one increment. BF2 showed the best filling capacity. Conclusions: It was possible to conclude that the material and the number of increments directly influenced the internal adaptation and voids formation of Class V restorations.

Clinical Performance of a "No Wait" Universal Adhesive in Noncarious Cervical Lesions: A Two-year Randomized Controlled Clinical Trial.

PURPOSE: To evaluate the 24-month clinical performance of a "no wait" universal adhesive with different application modes in comparison with an etch-and-rinsew and two-step self-etch adhesive in non-carious cervical lesions (NCCLs). MATERIALS AND METHODS: A total of 234 non-carious cervical lesions in 34 patients were restored following 5 different adhesive approaches: 1. Clearfil Universal Bond Quick, self-etch mode (CUQ-SE); 2. Clearfil Universal Bond Quick, selective etch mode (CUQ-SLE); 3. Clearfil Universal Bond Quick, etch-and-rinse mode (CUQ-ER); 4. Clearfil SE Bond (self-etch adhesive) (CSEB); 5. Tetric N-Bond Universal, etch-and-rinse mode (TBU-ER). All NCCLs were restored with a nanohybrid composite (Tetric N-Ceram). The restorations were evaluated at baseline, 6, 12, and 24months of clinical service regarding retention, marginal adaptation, marginal discoloration, secondary caries, post-operative sensitivity, color match, surface texture using modified United States Public Health Service (USPHS) criteria. RESULTS: The patient recall rate at 24 months was 73.5%. Eleven restorations, 6 of the CUQ-SE group, 4 of the CSEB group and 1 of the TBU-ER group, were clinically unacceptable due to retention loss. Regarding marginal adaptation and discoloration, CUQ-SE and CSEB groups exhibited higher bravo scores than other groups after 24 months (p < 0.05). At the end of 24-month examinations, no significant differences were detected among the groups regarding secondary caries, post-operative sensitivity, color match and surface texture. CONCLUSION: The clinical survival rates of the "no wait" universal adhesive at self-etch mode after 24 months were not acceptable. The "no wait" universal adhesive showed clinically acceptable performance in selective-etch and etch-and-rinse mode according to the evaluated USPHS criteria.