Folate receptor-mediated delivery system based on chitosan coated polymeric nanoparticles for combination therapy of breast cancer.

Combination therapy using two or more drugs with different mechanisms of action is an effective strategy for treating cancer. This is because of the synergistic effect of complementary drugs that enhances their effectiveness. However, this approach has some limitations, such as non-specific distribution of the drugs in the tumor and the occurrence of dose-dependent toxicity to healthy tissues. To overcome these issues, we have developed a folate receptor-mediated co-delivery system that improves the access of chemotherapy drugs to the tumor site. We prepared a nanoplatform by encapsulating paclitaxel (PTX) and curcumin (CUR) in poly(caprolactone)-poly(ethylene glycol)-poly(caprolactone) (PCL-PEG-PCL) co-polymer using a double emulsion method and coating nanoparticles with pH-responsive chitosan-folic acid (CS-FA) conjugate. The nanocarrier's physicochemical properties were studied, confirming successful preparation with appropriate size and morphology. PTX and CUR could be released synchronously in a controlled and acid-facilitated manner. The dual drug-loaded nanocarrier exhibited excellent anti-tumor efficiency in MDA-MB-231 cells in vitro. The active targeting effect of FA concluded from the high inhibitory effect of dual drug-loaded nanocarrier on MDA-MB-231 cells, which have overexpressed folate receptors on their surface, compared to Human umbilical vein endothelial cells (HUVEC). Overall, the nanoengineered folate receptor-mediated co-delivery system provides great potential for safe and effective cancer therapy.

Valine conjugated polymeric nanocarriers for targeted co-delivery of rivastigmine and quercetin in rat model of Alzheimer disease.

Multifunctional nanocarriers are increasingly promising for disease treatment aimed at finding effective therapy and overcoming barriers in drug delivery. Herein, valine conjugated chitosan (VLCS) was used for surface modification of nanocarriers (NCs) based on Poly (ε-caprolactone)-Poly (ethylene glycol)-Poly (ε-caprolactone) (PCL-PEG-PCL) triblock copolymers (NCs@VLCS). The nanocarriers were co-loaded with rivastigmine (RV) and quercetin (QT) to yield the final RV/QT-NCs@VLCS as a multifunctional nanocarrier for Alzheimer's disease (AD) treatment. The large amino acid transporter 1 (LAT-1) was selected for the direction of the NCs to the brain. The biocompatibility of the nanocarrier was studied in HEK-293 and SH-SY5Y cells and rats. The Morris water maze test demonstrated a faster regain of memory loss with RV/QT-NCs@VLCS compared to the other groups. Furthermore, RV/QT-NCs@VLCS and RV/QT-NCs improved GSH depletion induced by scopolamine (SCO), with RV/QT-NCs@VLCS having a superior effect. The real-time PCR analysis revealed that co-delivery of RV and QT by NCs@VLCS showed significantly higher efficacy than sole delivery of RV. RV/QT-NCs@VLCS treatment also modulated the expression of BDNF, ACHE, and TNF-α. The findings revealed that NCs@VLCS co-loaded with RV and QT, significantly increased efficacy relative to the single use of RV and could be considered a potent multifunctional drug delivery system for Alzheimer's treatment.

An efficient method for cell sheet bioengineering from rBMSCs on thermo-responsive PCL-PEG-PCL copolymer.

Utilizing both medium enrichment and a thermos-responsive substrate to maintain the cell-to-cell junctions and extracellular matrix (ECM) intact, cell sheet technology has emerged as a ground-breaking approach. Investigating the possibility of using sodium selenite (as medium supplementation) and PCL-PEG-PCL (as vessel coating substrate) in the formation of the sheets from rat bone marrow-derived mesenchymal stem cells (rBMSCs) was the main goal of the present study. To this end, first, Polycaprolactone-co-Poly (ethylene glycol)-co-Polycaprolactone triblock copolymer (PCEC) was prepared by ring-opening copolymerization method and characterized by FTIR, 1 H NMR, and GPC. The sol-gel-sol phase transition temperature of the PCEC aqueous solutions with various concentrations was either measured. Next, rBMSCs were cultured on the PCEC, and let be expanded in five different media containing vitamin C (50 µg/ml), sodium selenite (0.1 µM), vitamin C and sodium selenite (50 µg/ml + 0.1 µM), Trolox, and routine medium. The proliferation of the cells exposed to each material was evaluated. Produced cell sheets were harvested from the polymer surface by temperature reduction and phenotypically analyzed via an inverted microscope, hematoxylin and eosin (H&E) staining, and field emission scanning electron microscopy (FESEM). Through the molecular level, the expression of the stemness-related genes (Sox2, Oct-4, Nanog), selenium-dependent enzymes (TRX, GPX-1), and aging regulator gene (Sirt1) were measured by q RT-PCR. Senescence in cell sheets was checked by beta-galactosidase assay. The results declared the improved ability of the rBMSCs for osteogenesis and adipogenesis in the presence of antioxidants vitamin C, sodium selenite, and Trolox in growth media. The data indicated that in the presence of vitamin C and sodium selenite, the quality of the cell sheet was risen by reducing the number of senescent cells and high transcription of the stemness genes. Monolayers produced by sodium selenite was in higher-quality than the ones produced by vitamin C.

Preparation of porous PCL-PEG-PCL scaffolds using supercritical carbon dioxide.

In this study, the Supercritical Carbon Dioxide (scCO2) gas foaming procedure was used in the preparation of scaffolds containing the model drug dexamethasone (DXMT). The method used did not include an organic solvent thus making it a safe method. The ring-opening polymerization of PCL-PEG-PCL (PCEC) triblock was conducted using an organocatalyst [1,8 diazabicyclo [5.4.0] undec-7-ene (DBU)]. After mixing 5.0 g of DXMT with 50.0 g of PCEC, hydraulic pressure was applied to compress the mixed powder into disc-like tablets. The tablet-like scaffold of the triblock containing DXMT was inserted into a scCO2 gas-foaming device. The peak porosity percentage of the synthesized triblock was found to be 55.58 %. Pressure, temperature, soaking time and the time required to depressurize were recorded as 198 bar, 50 °C, 2.0 h, and 28 min respectively. After treatment with scCO2, the scaffolds experienced an almost full release of DXMT in vitro after 30 days (83.74 ± 1.54 % vs 52.24 ± 2.03 % before scCO2 treatment). In conclusion, the results proved that the scCO2 gas foaming procedure could be employed for constructing modifiable PCEC scaffolds with plausible porosity and structural and morphological features which can manipulate drug release.

3D porous PCL-PEG-PCL / strontium, magnesium and boron multi-doped hydroxyapatite composite scaffolds for bone tissue engineering.

Bioceramic/polymer composite systems have gained importance in treating hard tissue damages using bone tissue engineering (BTE). In this context, it was aimed to develop 3D porous composite PCL-PEG-PCL scaffolds containing different amounts of B, Sr and Mg multi-doped HA that can provide bone regeneration in the bone defect area and to investigate the effect of both the amount of inorganic phase and the porosity on the mechanical and the biological properties. B-Sr-Mg multi-doped HA and PCL-PEG-PCL copolymer were successfully synthesized. PCL-PEG-PCL composite scaffolds containing different amounts of hydroxyapatite (HA) (10% and 20 wt%) were produced with the desired porosity (50% and 60%) by compression-molding and particulate leaching method. The porosity of the scaffolds was determined between 47% and 59%. HA/PCL-PEG-PCL composite scaffolds were subjected to a 3-week degradation test and showed negligible (0.2-0.5%) degradation. The water uptake percentage of the composite scaffolds with 60% porosity was the highest among all groups. Presence of HA in the scaffolds improved the water adsorption and the mechanical properties. Compressive strength of the scaffolds was between 9.32 and 24.27 MPa and 20% 2Sr0.5BHA scaffolds were found to have the maximum compressive strength. Compressive strength of 50% porous samples was higher than that of 60% porous samples. In the relative cell viability (%) test, the highest viability was observed on the scaffolds with HA and 2Sr0.5BHA. The specific ALP activity level of the cells on the scaffolds containing 2Sr0.5BHA was significantly higher (2.6 times) than that of the control group. The amount of porosity did not make a significant difference in cellular response. It was concluded that PCL-PEG-PCL composite scaffolds with 2Sr0.5BHA have the potential to be used in BTE.

Co-delivery of paclitaxel and curcumin by biodegradable polymeric nanoparticles for breast cancer chemotherapy.

Multi-drug chemotherapy has been one of the most popular strategies for the treatment of malignant tumors, and has achieved desirable therapeutic outcomes. The objective of the present study is to develop biodegradable PCEC nanoparticles (NPs) for the co-delivery of paclitaxel (PTX) and curcumin (CUR), and investigate the antitumor effect of the drug delivery system (DDS: PTX-CUR-NPs) against breast cancer both in vitro and in vivo. The prepared PTX-CUR-NPs had a small size of 27.97 ± 1.87 nm with a low polydispersity index (PDI, 0.197 ± 0.040). The results exhibited slow release of PTX and CUR from the DDS without any burst effect. Further, the PTX-CUR-NPs displayed a dose-dependent cytotoxicity in MCF-7 cells with a higher apoptosis rate (64.29% ± 1.97%) as compared to that of free drugs (PTX + CUR, 34.21% ± 0.81%). The cellular uptake study revealed that the drug loaded PCEC polymeric nanoparticles were more readily uptaken by tumor cells in vitro. To evaluate the in vivo anti-tumor effect, the PTX-CUR-NPs were intravenously administered to BALB/c nude mouse xenografted with MCF-7 cells and the results exhibited significant inhibition of tumor growth with prolonged survival time and reduced side effect when compared with free drugs (PTX + CUR). Moreover, the administration of PTX-CUR-NPs treatment led to lower Ki67 expression (p < 0.05), and enhanced TUNEL positivity (higher apoptosis, p < 0.01) in tumor cells as compared to other treatment groups, suggesting the therapeutic efficacy of the DDS. Altogether, the present study suggests that the DDS PTX-CUR-NPs could be employed for the effective treatment of breast cancers in near future.

Surfactant-Free, Self-Assembled Nanomicelles-Based Transdermal Hydrogel for Safe and Targeted Delivery of Methotrexate against Rheumatoid Arthritis.

Methotrexate (MTX) is the first line agent for therapy against rheumatoid arthritis (RA); however, orally its efficacy is hampered by poor solubility, less permeability, short plasma half-life, and reduced bioavailability. Meanwhile, parenteral formulations are associated with severe adverse effects. In an attempt to improve the efficacy of MTX, we synthesized polycaprolactone-polyethylene glycol-polycaprolactone (PCL-PEG-PCL) triblock copolymer by a ring-opening copolymerization reaction and used it as a carrier for the fabrication of MTX-loaded nanomicelles. Surfactant-free, self-assembled nanomicelles were prepared by nanoprecipitation technique and optimized through central composite design. The optimized nanomicelles exhibited a size distribution of 31 nm and an encapsulation efficiency of 91%. In vitro, the nanomicelles exhibited hemocompatibility, sustained release, and significantly high uptake in lipopolysaccharide activated macrophages. To facilitate application on the skin, optimized nanomicelles were loaded into a Carbopol 934-based hydrogel with eucalyptus oil as a penetration enhancer. Eucalyptus oil significantly improved the permeation of nanomicelles through the skin (p < 0.001). When the hydrogel was applied on the RA mice model, nanomicelles exhibited preferentially highest accumulation in the inflamed joints than other organs. As compared with the free MTX, MTX nanomicelles significantly improved the pharmacokinetic (4.34-fold greater half-life, 3.68-fold higher AUC0-t, and 3.15-fold higher mean residence time) and pharmacodynamic profile ascertained through low inflammatory cytokines expression, improved oxidation protection, recovered behavioral responses, and radiological analysis. MTX nanomicelles-based hydrogel also significantly reduced the hepatotoxicity and did not activate the immune system. These results suggest that the MTX-loaded nanomicelles-based transdermal hydrogel can prove to be a promising agent against RA.

In-vitro Release Evaluation of Growth Hormone from an Injectable In-Situ Forming Gel Using PCL-PEG-PCL Thermosensitive Triblock.

OBJECTIVE: An injectable long acting In-Situ Forming Gel (ISFG) of human Growth Hormone (hGH) was prepared by using triblock PCL-PEG-PCL (Mw 1500-1500-1500). Ring-Opening Polymerization (ROP) of triblock using microwave was applied. METHODS: The BCA protein assay Kit was used to determine the concentration of hGH in the in-vitro release medium. Finally, Sodium Dodecyl Sulfate-Polyacrylamide Gel Electrophoresis (SDS-PAGE) tests and Circular Dichroism (CD) spectrum were done to approve the stability of released hGH. The result of ROP demonstrated that the proportion of PCL to PEG accorded with the initial molar ratio of the monomers. The cross-section of the Surface Electron Microscopy (SEM) indicated the porous framework of the hydrogel could load the drug into its tridimensional matrixes structure. There is the low initial burst release of hGH from the supramolecular hydrogel. RESULTS: The maximum in-vitro release of hGH was 71.2 % ± 1.5 that were due to hGH degrading after this time (21 days). The CD spectrum and SDS-PAGE results confirmed the stability of hGH during invitro release evaluation. CONCLUSION: The results suggest that the sustained-release formulation using PCL-PEG-PCL can be applied to control the release of hGH.

Composite clinoptilolite/PCL-PEG-PCL scaffolds for bone regeneration: In vitro and in vivo evaluation.

In this study, clinoptilolite (CLN) was employed as a reinforcement in a polymer-based composite scaffold in bone tissue engineering and evaluated in vivo for the first time. Highly porous, mechanically stable, and osteogenic CLN/PCL-PEG-PCL (CLN/PCEC) scaffolds were fabricated with modified particulate leaching/compression molding technique with varying CLN contents. We hypothesized that CLN reinforcement in a composite scaffold will improve bone regeneration and promote repair. Therefore, the scaffolds were analyzed for compressive strength, biodegradation, biocompatibility, and induction of osteogenic differentiation in vitro. CLN inclusion in PC-10 (10% w/w) and PC-20 (20% w/w) scaffolds revealed 54.7% and 53.4% porosity, higher dry (0.62 and 0.76 MPa), and wet (0.37 and 0.45 MPa) compressive strength, greater cellular adhesion, alkaline phosphatase activity (2.20 and 2.82 mg/gDNA /min), and intracellular calcium concentration (122.44 and 243.24 g Ca/mgDNA ). The scaffolds were evaluated in a unicortical bone defect at anterior aspect of proximal tibia of adult rabbits 4 and 8 weeks postimplantation. Similar to in vitro results, CLN-containing scaffolds led to efficient regeneration of bone in a dose-dependent manner. PC-20 demonstrated highest quality of bone union, cortex development, and bone-scaffold interaction at the defect site. Therefore, higher CLN content in PC-20 permitted robust remodeling whereas pure PCEC (PC-0) scaffolds displayed fibrous tissue formation. Consequently, CLN was proven to be a potent reinforcement in terms of promoting mechanical, physical, and biological properties of polymer-based scaffolds in a more economical, easy-to-handle, and reproducible approach.

Evaluation of anti-inflammatory impact of dexamethasone-loaded PCL-PEG-PCL micelles on endotoxin-induced uveitis in rabbits.

The aim of this study was to investigate the capability of polycaprolactone-polyethylene glycol-polycaprolactone (PCL-PEG-PCL) micelles in improving the anti-inflammatory effects of dexamethasone (DEX). A film hydration method was used for the preparation of the DEX-loaded PCL-PEG-PCL micelles. In vitro cytotoxicity of the micelles obtained was investigated on L929 cells. Cellular uptake was studied by using flow cytometry and fluorescence microscopy. Anterior uveitis was induced in a group of rabbits by intravitreal injection of endotoxin from Salmonella typhimurium. The severity of inflammation-induced was clinically graded by using Hogan's classification method. Protein concentration in the aqueous humor was also measured. The micelles exhibited suitable compatibility on L929 cells and were taken up by the cells in a concentration- and time-dependent manner. The DEX-loaded micelles could reduce the clinical symptoms of uveitis after a lag-time. At 24 and 36 h after the LPS injection, the PCL-PEG-PCL micelles showed a better inhibitory effect on uveitis than the marketed eye drop, the differences did not reach significant levels though. This study demonstrated the potential of the PCL-PEG-PCL micelles as carriers for DEX in treating anterior uveitis. However, this concept is still to be further investigated.

In vitro and in vivo delivery of artemisinin loaded PCL-PEG-PCL micelles and its pharmacokinetic study.

Artemisinin (ART) is a natural anti-malarial sesquiterpene lactone with anticancer properties, but its application is limited because of its low water solubility. To increase the bioavailability and water solubility of ART, we synthesized three series of poly (ɛ-caprolactone)-poly (ethylene glycol)-poly (ɛ-caprolactone) (PCL-PEG-PCL) tri-block copolymers. The structure of the copolymers was characterized by HNMR, FTIR, DSC and GPC techniques. ART was encapsulated inside micelles by a nanoprecipitation method which leading to the formation of ART/PCL-PEG-PCL micelles. The obtained micelles were characterized by DLS and AFM technique. The results showed that the average size of micelles was about 83.22 nm. ART was encapsulated into PCL-PEG-PCL micelles with encapsulation efficacy of 89.23 ± 1.41%. In vivo results demonstrated that this formulation significantly increased drug accumulation in tumours. Pharmacokinetic study in rats revealed that in vivo drug exposure of ART was significantly increased and prolonged by intravenously administering ART-loaded micelles when compared with the same dose of free ART. The MTT assay showed that bare PCL-PEG-PCL micelles is non-toxic to MCF7 and 4T1 cancer cell lines whereas the ART/PCL-PEG-PCL micelles showed a specific toxicity to both cancer cell lines. Therefore, the polymeric micellar formulation of ART based copolymer could provide a desirable process for ART delivery.

Preparation and in vivo evaluation of anti-plasmodial properties of artemisinin-loaded PCL-PEG-PCL nanoparticles.

PURPOSE: Artemisinin (ART) has anti-inflammatory, antimicrobial, antioxidant, anti-amyloid, and anti-malarial effects, but its application is limited due to its low water solubility and poor oral bioavailability. In this study, the bioavailability, water solubility, and anti-plasmodial property of ART were improved by PCL-PEG-PCL tri-block copolymers. METHODS: The structure of the copolymers was characterized by 1H NMR, FT-IR, DSC, and GPC techniques. ART was encapsulated within micelles by a single-step nano-precipitation method, leading to the formation of ART-loaded PCL-PEG-PCL micelles. The obtained micelles were characterized by dynamic light scattering (DLS) and atomic force microscopy (AFM). The in vivo anti-plasmodial activity of ART-loaded micelles was measured against Plasmodium berghei infected Swiss albino mice. RESULTS: The results showed that the zeta potential of ART-loaded micelles was about -8.37 mV and the average size was 91.87 nm. ART was encapsulated into PCL-PEG-PCL micelles with a loading capacity of 19.33 ± 0.015% and encapsulation efficacy of 87.21 ± 3.32%. In vivo anti-plasmodial results against P. berghei showed that multiple injections of ART-loaded micelles could prolong the circulation time and increase the therapeutic efficacy of ART. CONCLUSION: These results suggested that PCL-PEG-PCL micelles would be a potential carrier for ART for the treatment of malaria.

Nanosized CaP-silk fibroin-PCL-PEG-PCL/PCL based bilayer membranes for guided bone regeneration.

Guided bone regeneration (GBR) concept has been developed to prevent the formation of non-functional scar tissue layer on defect site by undertaking barrier role. In this study, a new bilayer membrane which consisted of one layer of electrospun silk fibroin/PCL-PEG-PCL incorporating nanocalcium phosphate (SPCA)1 and one layer of PCL membrane was developed for GBR. To improve the osteoconductivity of membranes, nanosized calcium phosphate particles synthesized by Flame Spray Pyrolysis method were incorporated into membranes at 10% (wt) (SPCA10) and 20% (wt) (SPCA20) of the polymer content. The structural and chemical analyses revealed the well-integrated two layers of membranes with a total thickness of ca 100µm. In the regenerative layer, the highly porous mesh structure had a thickness of 12.6µm with randomly oriented fibers having diameters around 760nm, and nanoparticles dispersed homogenously. The mechanical test results showed remarkable improvement on the tensile strength of membranes with incorporation of nanoparticles. Higher water affinity of nanoCaP included membranes was proved by lower contact angle values and higher percent water uptake capacity. Biomineralization assay revealed that nucleation and growth of apatites around fibers of SPCA10 and SPCA20 were apparent while on SPCA0 apatite minerals were barely detected after 10days. Human dental pulp stem cells (DPSC) were seeded on electrospun layer of the bilayer membranes for biocompatibility and osteo-compatibility study. Increasing nanoCaP amount resulted in higher cell adhesion, proliferation, ALP activity and calcium deposition on membranes. These overall results confirmed the biocompatibility and potential applicability of proposed membranes for GBR treatments.

The effect of chrysin-loaded nanofiber on wound healing process in male rat.

Wound healing is an inflammatory process. Chrysin, a natural flavonoid found in honey, has been recently investigated to have anti-inflammatory and antioxidant effects. In this work, the effects of chrysin-loaded nanofiber on the expressions of genes that are related to wound healing process such as P53, TIMPs, MMPs, iNOS, and IL-6 in an animal model study were evaluated. The electrospinning method was used for preparation the different concentrations of chrysin-loaded PCL-PEG nanofiber (5%, 10%, and 20% [w/w]) and characterized by FTIR and SEM. The wound healing effects of chrysin-loaded PCL-PEG nanofiber were in vivo investigated in rats, and the expressions of genes related to wound healing process were evaluated by real-time PCR. The study results showed chrysin-loaded PLC-PEG compared to chrysin ointment and control groups significantly increase IL-6, MMP-2, MMP-8, MMP-9, TIMP-1, and TIMP-2 (p < .05). On the other hand, nanofibers containing chrysin significantly decreased p53 and iNOS expression compared to chrysin ointment and control groups (p < .05). According to the results, chrysin-loaded PCL-PEG-PCL nanofibers have positive effects on the expression of the genes that have pivotal role in wound healing.

Pharmacokinetics and in vitro and in vivo delivery of sulforaphane by PCL-PEG-PCL copolymeric-based micelles.

A reliable and efficient drug delivery system using PCL-PEG-PCL copolymers was established for the anti-cancer compound sulforaphane (SF) in this study. Encapsulated SF by PCL-PEG-PCL nanoparticles led to formation of SF-loaded PCL-PEG-PCL micelles. Micelles characterization and stability, the particle size and their morphology were determined by DLS and AFM. The loading efficiency of SF was 19.33 ± 1.28%. The results of AFM showed that the micelles had spherical shapes with the size of 107 nm. In vitro release of SF from SF-entrapped micelles was remarkably sustained. The cytotoxicity of free SF, PCL-PEG-PCL and SF/PCL-PEG-PCL micelles was analysis by MTT colorimetric assay on MCF-7, 4T1 and MCF10A cell lines. Expression levels of BCL-2, PARP, COX-2, Caspase-9 and ACTB genes were quantified by real-time PCR. Flow cytometry analysis was performed using the Annexin V-FITC Apoptosis Detection Kit to evaluate the apoptotic effects of free SF compared with SF/PCL-PEG-PCL micelles. Study of the in vivo pharmacokinetics of the SF-loaded micelles was carried out on SF-loaded PCL-PEG-PCL micelles in comparison with free SF. The results of in vivo experiments indicated that the SF loaded micelles significantly reduced the tumor size. In vivo results showed that the multiple injections of SF-loaded micelles could prolong the circulation period and increase the therapeutic efficacy of SF. Also, in comparison with the free-SF solution, encapsulation of the SF in micelles increased the mean residence time from 0.5 to 4 h and the area under the concentration-time curve up to 50 folds.

Clinoptilolite/PCL-PEG-PCL composite scaffolds for bone tissue engineering applications.

The aim of this study was to prepare and characterize highly porous clinoptilolite/poly(ε-caprolactone)-poly(ethylene glycol)-poly(ε-caprolactone) composite scaffolds. Scaffolds with different clinoptilolite contents (10% and 20%) were fabricated with reproducible solvent-free powder compression/particulate leaching technique. The scaffolds had interconnective porosity in the range of 55-76%. Clinoptilolite/poly(ε-caprolactone)-poly(ethylene glycol)-poly(ε-caprolactone) scaffolds showed negligible degradation within eight weeks and displayed less water uptake and higher bioactivity than poly(ε-caprolactone)-poly(ethylene glycol)-poly(ε-caprolactone) scaffolds. The presence of clinoptilolite improved the mechanical properties. Highest compressive strength (5.6 MPa) and modulus (114.84 MPa) were reached with scaffold group containing 20% clinoptilolite. In vitro protein adsorption capacity of the scaffolds was also higher for clinoptilolite/poly(ε-caprolactone)-poly(ethylene glycol)-poly(ε-caprolactone) scaffolds. These scaffolds had 0.95 mg protein/g scaffold adsorption capacity and also higher osteoinductivity in terms of enhanced ALP, OSP activities and intracellular calcium deposition. Stoichiometric apatite deposition (Ca/P=1.686) was observed during cellular proliferation analysis with human fetal osteoblasts cells. Thus, it can be suggested that clinoptilolite/poly(ε-caprolactone)-poly(ethylene glycol)-poly(ε-caprolactone) composite scaffolds could be promising carriers for enhancement of bone regeneration in bone tissue engineering applications.

Paclitaxel-loaded polymeric nanoparticles combined with chronomodulated chemotherapy on lung cancer: In vitro and in vivo evaluation.

The objective of our study was to examine the anti-tumor effect of paclitaxel (PTX)-loaded polymeric nanoparticles (PTX-NPs) combined with circadian chronomodulated chemotherapy. Our intention was to screen out the best time of the day for the drug to be administered. PTX-NPs with a diameter of approximately 168nm were prepared through a thin film dispersion technique. The PTX in PTX-NPs showed an initial fast release subsequently a slower and sustained release. The cytotoxicity of chronomodulated administration of PTX-NPs in vitro confirmed that its cytotoxic effect was lower than that of PTX injection, and showed a time-dependent effect. In addition, anti-tumor effect was examined by analysing tumor growth inhibition rate, micro-vessel density (MVD), cell proliferation and cell apoptosis, following either injection with PTX or administration of PTX-NPs. Micro fluorine-18-deoxyglucose PET/computed tomography (18F-FDG PET/CT) was used to evaluate tumor reactivity to PTX-NPs combined with chronomodulated chemotherapy. Taken these results into consideraion, our experiment indicates that PTX-NPs exhibit greater anti-tumor activity against A549 cells, in comparison with PTX injection, and the anti-tumor effect at 15h after light onset (HALO) administration is the best in all groups. Therefore, prepared PTX-NPs combined with chronomodulated chemotherapy could be a potential treatment for lung cancer.

Degradability, cytocompatibility, and osteogenesis of porous scaffolds of nanobredigite and PCL-PEG-PCL composite.

Biocomposite scaffolds were fabricated by incorporation of nanobredigite (n-BD) into the polymer of poly(ε-caprolactone)-poly(ethyleneglycol)-poly(ε-caprolactone) (PCL-PEG-PCL). The results revealed that the addition of n-BD into PCL-PEG-PCL significantly improved water absorption, compressive strength, and degradability of the scaffolds of n-BD/PCL-PEG-PCL composite (n-BPC) compared with PCL-PEG-PCL scaffolds alone. In addition, the proliferation and alkaline phosphatase activity of MG63 cells cultured on n-BPC scaffolds were obviously higher than that cultured on PCL-PEG-PCL scaffolds. Moreover, the results of the histological evaluation from the animal model revealed that the n-BPC scaffolds significantly improved new bone formation compared with the PCL-PEG-PCL scaffolds, indicating good osteogenesis. The n-BPC scaffolds with good biocompatibility could stimulate cell proliferation, differentiation, and bone tissue regeneration and would be an excellent candidate for bone defect repair.

Preparation and characterization of novel electrospun poly(ϵ-caprolactone)-based nanofibrous scaffolds.

Nanofibrous scaffolds have many advantages that make them excellent candidates for tissue engineering applications. The scaffolds with high surface area to volume ratio favor cell adhesion, proliferation, migration and differentiation. In the present study, the preparation of electrospun poly (ϵ-caprolactone)-polyethylene glycol-poly (ϵ-caprolactone) (PCL-PEG-PCL) nanofibers is shown for the first time. PCL-PEG-PCL copolymers were synthesized using a ring-opening polymerization method. The polymers were characterized by FT-IR, (1)H NMR and DSC. Nanofibers with mean diameters ranging from 60 to 170 nm were obtained by the electrospinning method. Their morphology was evaluated by scanning electron microscopy (SEM). An MTT assay was used to compare the number of cells in the nanofiber scaffold. It was found that the morphology and diameter of the nanofiber depended on the chemical composition and molecular weight of the PEG segment of the copolymer used for electrospinning. Increasing the molecular weight of PEG blocks from 2000 to 6000 led to a decrease of the diameter of the fibers and the formation of beads.

Folate-modified lipid-polymer hybrid nanoparticles for targeted paclitaxel delivery.

The purpose of this study was to develop a novel lipid-polymer hybrid drug carrier comprised of folate (FA) modified lipid-shell and polymer-core nanoparticles (FLPNPs) for sustained, controlled, and targeted delivery of paclitaxel (PTX). The core-shell NPs consist of 1) a poly(ε-caprolactone) hydrophobic core based on self-assembly of poly(ε-caprolactone)-poly(ethylene glycol)-poly(ε-caprolactone) (PCL-PEG-PCL) amphiphilic copolymers, 2) a lipid monolayer formed with 1,2-distearoyl-sn-glycero-3-phosphoethanolamine-N-[methoxy (polyethylene glycol)-2000] (DSPE-PEG2000), 3) a targeting ligand (FA) on the surface, and were prepared using a thin-film hydration and ultrasonic dispersion method. Transmission electron microscopy and dynamic light scattering analysis confirmed the coating of the lipid monolayer on the hydrophobic polymer core. Physicochemical characterizations of PTX-loaded FLPNPs, such as particle size and size distribution, zeta potential, morphology, drug loading content, encapsulation efficiency, and in vitro drug release, were also evaluated. Fluorescent microscopy proved the internalization efficiency and targeting ability of the folate conjugated on the lipid monolayer for the EMT6 cancer cells which overexpress folate receptor. In vitro cytotoxicity assay demonstrated that the cytotoxic effect of PTX-loaded FLPNPs was lower than that of Taxol(®), but higher than that of PTX-loaded LPNPs (without folate conjugation). In EMT6 breast tumor model, intratumoral administration of PTX-loaded FLPNPs showed similar antitumor efficacy but low toxicity compared to Taxol(®). More importantly, PTX-loaded FLPNPs showed greater tumor growth inhibition (65.78%) than the nontargeted PTX-loaded LPNPs (48.38%) (P<0.05). These findings indicated that the PTX loaded-FLPNPs with mixed lipid monolayer shell and biodegradable polymer core would be a promising nanosized drug formulation for tumor-targeted therapy.