Safety and effectiveness of an antiseptic wound cleansing and irrigation solution containing polyhexamethylene biguanide.

OBJECTIVE: There is currently a wide range of cleansing and irrigation solutions available for wounds, many of which contain antimicrobial agents. The aim of this study was to assess the safety of HydroClean Solution (HARTMANN, Germany), a polyhexamethylene biguanide (PHMB)-containing irrigation solution, in a standard cytotoxicity assay, and to assess its effect in a three-dimensional (3D) full-thickness model of human skin. METHOD: A number of commercially available wound cleansing and irrigation solutions, including the PHMB-containing irrigation solution, were tested in a cytotoxicity assay using L929 mouse fibroblasts (ISO 10993-5:2009). The PHMB-containing irrigation solution was then assessed in an in vitro human keratinocyte-fibroblast 3D full-thickness wounded skin model to determine its effect on wound healing over six days. The effect of the PHMB-containing irrigation solution on tissue viability was measured using a lactate dehydrogenase (LDH) assay, and proinflammatory effects were measured using an interleukin-6 (IL-6) production assay. RESULTS: The PHMB-containing irrigation solution was shown to be equivalent to other commercially available cleansing and irrigation solutions when tested in the L929 fibroblast cytotoxicity assay. When assessed in the in vitro 3D human full-thickness wound healing model, the PHMB-containing irrigation solution treatment resulted in no difference in levels of LDH or IL-6 when compared with levels produced in control Dulbecco's phosphate-buffered saline cultures. There was, however, a pronounced tissue thickening of the skin model in the periwound region. CONCLUSION: The experimental data presented in this study support the conclusion that the PHMB-containing irrigation solution has a safety profile similar to other commercially available cleansing and irrigation solutions. Evidence also suggests that the PHMB-containing irrigation solution does not affect tissue viability or proinflammatory cytokine production, as evidenced by LDH levels or the production of IL-6 in a 3D human full-thickness wound healing model. The PHMB-containing irrigation solution stimulated new tissue growth in the periwound region of the skin model.

Comparison of In Vitro Bacterial Susceptibility to Common and Novel Equine Wound Care Dressings.

Antimicrobial resistance is becoming a problem of concern in the veterinary field, necessitating the use of effective topical treatments to aid the healing of wounds. Honey has been used for thousands of years for its medicinal properties, but in recent years medical-grade Manuka honey has been used to treat infected wounds. The goal of this study was to determine the relative susceptibility of four common equine wound pathogens to ten different types of antimicrobial agents based on the minimum inhibitory concentration (MIC) and minimum bactericidal concentration (MBC). The pathogens studied include ATCC lab-acclimated Pseudomonas aeruginosa, Escherichia coli, and methicillin-resistant Staphylococcus aureus and one from an equine sample submitted to the Colorado State Veterinary Diagnostic Laboratory (Streptococcus equi ssp. zooepidemicus (Streptococcus zooepidemicus)). An additional goal of the study was to describe the comparison of bactericidal activity of medical-grade Manuka honey, local honey, and commercial, food-grade honey to other commonly used wound dressings (20% hypertonic saline, silver sulfadiazine cream, PHMB gauze, and PHMB foam). The objective is to provide veterinary practitioners with comparative data on the use of a variety of antimicrobial dressings for inhibiting the growth of common wound bacteria. MIC and MBC for Manuka, store, and local honeys were comparable to those of sterile gauze, sugar, and hypertonic saline. Across bacterial species, local honey proved to have more bactericidal activity when compared to Manuka honey and commercial, food-grade honey. The MIC and MBC for PHMB gauze and foam was consistently at a higher dilution compared to the other antimicrobials. The majority of antimicrobials exhibited stronger inhibitory and bactericidal activity against a Streptococcus zooepidemicus isolate obtained from a wound compared to other bacteria that were ATCC lab-acclimated. Additional research for in vivo applications needs to be done to see whether differences exist in effective wound management.

Biocidal Efficacies of Contact Lens Disinfecting Solutions Against International Organization for Standardization (ISO) Compendial Organisms.

Purpose: This study was conducted to evaluate and compare the in vitro disinfection efficacies of six commercial lens cleaning and disinfecting products for planned replacement soft contact lenses. Methods: Disinfection efficacies of five multi-purpose solutions (MPSs) and one hydrogen peroxide solution (HPS) as control were evaluated in the presence of organic soil according to the International Organization for Standardization (ISO, Geneva, Switzerland) ISO 14729 stand-alone test protocol. The five specified compendial organisms, three bacteria (Staphylococcus aureus, Pseudomonas aeruginosa, and Serratia marcescens) and two fungi (Candida albicans and Fusarium solani) were incubated with each solution under standard conditions, after which microbes were recovered and quantified. Results: Each of the solutions evaluated met or exceeded the standard's primary criteria (3-log reduction of bacteria and 1-log reduction of fungi) after incubation for the manufacturer-recommended soaking time, except for COMPLETE MPS, which achieved only 0.4 ± 0.1 average log reduction for C. albicans. However, differences in efficacy between the solutions were noted. Average log reduction across all microbes for Biotrue Hydration Plus (4.6 ± 0.1) was comparable to that for CLEAR CARE PLUS HPS (4.3 ± 0.1) and greater than those for OPTI-FREE puremoist (3.6 ± 0.1), OPTI-FREE Replenish (4.0 ± 0.2), ACUVUE RevitaLens (3.9 ± 0.03), and COMPLETE MPS (3.6 ± 0.1). Biotrue Hydration Plus was especially effective at reducing the population of C. albicans (4.2 ± 0.7-log reduction). Conclusion: Products marketed for planned replacement soft CL disinfection generally meet the ISO 14729 standard's primary criteria for reducing populations of compendial organisms, with larger differences between solutions noted with C. albicans.

Preparation and Antimicrobial Activity of a Film-Forming Polyhexamethylene Biguanide Teat Disinfectant.

Bovine mastitis caused by infectious pathogens can lead to a decline in production performance and an increase in elimination rate, resulting in huge losses to the dairy industry. This study aims to prepare a novel dairy cow teat disinfectant with polyhexamethylene biguanide (PHMB) as the main bactericidal component and to evaluate its bactericidal activity in vitro and its disinfection effect in dairy cow teats. PHMB disinfectant with a concentration of 3 g/L was prepared with PVA-1788, propylene glycol and glycerol as excipients. When the dilution ratio is 1:4800 and the action time is 5 min, the PHMB teat disinfectant can reduce the four types of bacteria (S. agalactiae ATCC 12386, S. dysgalactiae ATCC 35666, S. aureus ATCC 6538, and E. coli ATCC 8099) by 99.99%. PHMB teat disinfectant applied on the skin of rabbits with four bacteria types achieved an average log10 reduction greater than 4. After 30 s of PHMB teat disinfectant dipping, the bacteria of cow teats were counted prior to disinfection. The mean log10 reduction in bacteria on the skin surface of 12 cows ranged from 0.99 to 3.52 after applying the PHMB teat disinfectant for 10 min. After 12 h, the PHMB teat disinfectant achieved an average log10 reduction in bacteria from 0.27 to 0.68 (compared with that prior to disinfection). These results suggested that PHMB teat disinfection has the potential to prevent and treat mastitis-causing bacteria in dairy herds.

Sterilized Polyhexanide-Releasing Chitosan Membranes with Potential for Use in Antimicrobial Wound Dressings.

Wound infection is a common complication of chronic wounds. It can impair healing, which may not occur without external help. Antimicrobial dressings (AMDs) are a type of external help to infected chronic wounds. In this study, highly porous membranes made of only chitosan and containing the antiseptic polyhexanide (poly(hexamethylene biguanide); PHMB) were prepared by cryogelation, aiming to be used in AMDs. These membranes exhibited a water swelling capacity of 748%, a water drop penetration time of 11 s in a dry membrane and a water vapor transmission rate of 34,400 g H2O/m2/24 h when in contact with water. The best drug loading method involved simultaneous loading by soaking in a PHMB solution and sterilization by autoclaving, resulting in sterilized, drug-loaded membranes. When these membranes and a commercial PHMB-releasing AMD were assayed under the same conditions, albeit far from the in vivo conditions, their drug release kinetics were comparable, releasing PHMB for ca. 6 and 4 h, respectively. These membranes exhibited high antibacterial activity against Escherichia coli, Staphylococcus aureus and Pseudomonas aeruginosa, which are bacterial species commonly found in infected wounds and blood clotting activity. The obtained results suggest that these membranes may have potential for use in the development of AMDs.

Surface-Modified Carboxylated Cellulose Nanofiber Hydrogels for Prolonged Release of Polyhexamethylene Biguanide Hydrochloride (PHMB) for Antimicrobial Applications.

The surface modification of cellulose nanofibers (CNFs) using a 2,2,6,6-tetramethylpiperidine-1-oxyl (TEMPO)/sodium bromide (NaBr)/sodium hypochlorite (NaClO) system was successful in improving their hydrophilicity. Following that, we fabricated hydrogels containing carboxylated cellulose nanofibers (c-CNFs) and loaded them with polyhexamethylene biguanide (PHMB) using a physical crosslinking method, aiming for efficient antimicrobial uses. The morphological and physicochemical properties of all hydrogel formulations were characterized, and the results revealed that the 7% c-CNFs-2 h loaded with PHMB formulation exhibited desirable characteristics such as regular shape, high porosity, good mechanical properties, suitable gel content, and a good maximum swelling degree. The successful integration of PHMB into the c-CNF matrix was confirmed by FTIR analysis. Furthermore, the 7% c-CNFs-2 h loaded with the PHMB formulation demonstrated PHMB contents exceeding 80% and exhibited a prolonged drug release pattern for up to 3 days. Moreover, this formulation displayed antibacterial activity against S. aureus and P. aeruginosa. In conclusion, the novel approach of c-CNF hydrogels loaded with PHMB through physical crosslinking shows promise as a potential system for prolonged drug release in topical drug delivery while also exhibiting excellent antibacterial activity.

Comparing cytotoxicity and efficacy of miltefosine and standard antimicrobial agents against Acanthamoeba trophozoites and cyst forms: An in vitro study.

Acanthamoeba keratitis (AK) is an eye disease often occurring in contact lens wearers. AK treatment is prolonged and requires multiple drugs, which can lead to adverse effects. Our study aimed to compare the in vitro activities and safety of Miltefosine with that of conventional antimicrobial agents used to treat AK. Acanthamoeba castellanii genotype T4 was obtained from a patient with keratitis and subjected to in vitro susceptibility testing with various antimicrobial agents, including Chlorhexidine (CHX), Pentamidine isethionate (PI)Polyhexamethylene biguanide (PHMB), and Miltefosine to assess their efficacy against Acanthamoeba trophozoites and cyst. The cytotoxicity of the agents was evaluated in Vero cells, and their selectivity indexes (SI) were calculated. Chlorhexidine exhibited the highest amoebicidal activity with the highest selectivity index against the trophozoite and cyst, ranging from 1.17 to 8.35. The selectivity index of PHMB is slightly comparable to Chlorhexidine, exhibiting significant anti-Acanthamoeba activity. On the other hand, Pentamidine isethionate and Miltefosine displayed low SI among the compounds. Pentamidine isethionate was effective at high concentrations, which was toxic. Miltefosine exhibited the lowest cytotoxicity; nevertheless, due to the lowest anti-Acanthamoeba activity presented a low selectivity against the parasite. Further studies on more clinical samples and prolonged incubation time should be done to investigate the effectiveness and toxicity of drugs in both in vitro and in vivo conditions.

Impact of human wound exudate on the bactericidal efficacy of commercial antiseptic products.

OBJECTIVE: By default, the antimicrobial efficacy of antiseptics used in wound management is tested in vitro under standardised conditions according to European standard DIN EN 13727, with albumin and sheep erythrocytes used as organic challenge. However, it is not clear whether these testing conditions adequately reflect the wound bed environment and its interaction with antiseptic products intended to be used in wounds in humans. METHOD: This study compared the efficacy of different commercial antiseptic products based on octenidine dihydrochloride (OCT), polyhexamethylene biguanide (PHMB) and povidone-iodine under challenge with human wound exudate collected from the hard-to-heal wounds of patients, compared to the standardised organic load, in an in vitro setting according to DIN EN 13727. RESULTS: The bactericidal efficacy of the tested products was reduced to a different extent when challenged with human wound exudate, compared to the standardised conditions. Overall, OCT-based products showed the necessary germ count reductions at the shortest exposure times (e.g., 15 seconds for Octenisept (Schülke & Mayr GmbH, Germany)). PHMB-based products were the least efficient. In addition to the protein content, other components of wound exudate, such as the microbiota, seem to influence the efficacy of antiseptics. CONCLUSION: This study demonstrated that the standardised in vitro test conditions may only partially reflect actual wound bed conditions in humans.

Effectiveness of a polyhexamethylene biguanide-containing wound cleansing solution using experimental biofilm models.

OBJECTIVE: Antiseptics are widely used in wound management to prevent or treat wound infections, and have been shown to have antibiofilm efficacy. The objective of this study was to assess the effectiveness of a polyhexamethylene biguanide (PHMB)-containing wound cleansing and irrigation solution on model biofilm of pathogens known to cause wound infections compared with a number of other antimicrobial wound cleansing and irrigation solutions. METHOD: Staphylococcus aureus and Pseudomonas aeruginosa single-species biofilms were cultured using microtitre plate and Centers for Disease Control and Prevention (CDC) biofilm reactor methods. Following a 24-hour incubation period, the biofilms were rinsed to remove planktonic microorganisms and then challenged with wound cleansing and irrigation solutions. Following incubation of the biofilms with a variety of concentrations of the test solutions (50%, 75% or 100%) for 20, 30, 40, 50 or 60 minutes, remaining viable organisms from the treated biofilms were quantified. RESULTS: The six antimicrobial wound cleansing and irrigation solutions used were all effective in eradicating Staphylococcus aureus biofilm bacteria in both test models. However, the results were more variable for the more tolerant Pseudomonas aeruginosa biofilm. Only one of the six solutions (sea salt and oxychlorite/NaOCl-containing solution) was able to eradicate Pseudomonas aeruginosa biofilm using the microtitre plate assay. Of the six solutions, three (a solution containing PHMB and poloxamer 188 surfactant, a solution containing hypochlorous acid (HOCl) and a solution containing NaOCl/HOCl) showed increasing levels of eradication of Pseudomonas aeruginosa biofilm microorganisms with increasing concentration and exposure time. Using the CDC biofilm reactor model, all six cleansing and irrigation solutions, except for the solution containing HOCl, were able to eradicate Pseudomonas aeruginosa biofilms such that no viable microorganisms were recovered. CONCLUSION: This study demonstrated that a PHMB-containing wound cleansing and irrigation solution was as effective as other antimicrobial wound irrigation solutions for antibiofilm efficacy. Together with the low toxicity, good safety profile and absence of any reported acquisition of bacterial resistance to PHMB, the antibiofilm effectiveness data support the alignment of this cleansing and irrigation solution with antimicrobial stewardship (AMS) strategies.

Three Consecutive Cases of Ocular Polyhexamethylene Biguanide (PHMB) Toxicity Due to Compounding Error.

Acanthamoeba keratitis is treated with long-term biguanide therapy, and the treatment itself can lead to ocular side effects. Knowledge of possible toxic complications can help in the better titration of the treatment regimen. Here, we describe the toxic side effects of polyhexamethylene biguanide (PHMB), which occurred in three consecutive patients treated with in-house compounded PHMB. There was an error in compounding the solution, with the resultant concentration of PHMB being around 0.2%. Patients developed ocular toxicity like conjunctival inflammation, persistent epithelial defect, and large pigment clumps on endothelium within six weeks of initiation of therapy. All of them developed rapidly progressive cataract and mydriatic pupil within three months. PHMB has the potential to cause irreversible damage to ocular structures, and the toxicity is time and concentration-dependent.

Plasmonic Perfect Absorber Utilizing Polyhexamethylene Biguanide Polymer for Carbon Dioxide Gas Sensing Application.

In this paper a perfect absorber with a photonic crystal cavity (PhC-cavity) is numerically investigated for carbon dioxide (CO2) gas sensing application. Metallic structures in the form of silver are introduced for harnessing plasmonic effects to achieve perfect absorption. The sensor comprises a PhC-cavity, silver (Ag) stripes, and a host functional material-Polyhexamethylene biguanide polymer-deposited on the surface of the sensor. The PhC-cavity is implemented within the middle of the cell, helping to penetrate the EM waves into the sublayers of the structure. Therefore, corresponding to the concentration of the CO2 gas, as it increases, the refractive index of the host material decreases, causing a blue shift in the resonant wavelength and vice versa of the device. The sensor is used for the detection of 0-524 parts per million (ppm) concentration of the CO2 gas, with a maximum sensitivity of 17.32 pm (pico meter)/ppm achieved for a concentration of 366 ppm with a figure of merit (FOM) of 2.9 RIU-1. The four-layer device presents a straightforward and compact design that can be adopted in various sensing applications by using suitable host functional materials.

Irrigation in Endodontics: Polyhexanide Is a Promising Antibacterial Polymer in Root Canal Treatment.

BACKGROUND: chronic apical periodontitis is a common pathology in dentistry, especially in endodontics. It is necessary to systematize data concerning commonly used irrigation solutions. The development of new protocols for endodontic treatment is a very promising direction. The use of a polyhexanide-based antiseptic can positively affect the results of endodontic treatment. METHODS: the review was carried out involving the search for English language research and meta-analyses in the Google Scholar and PubMed databases. RESULTS: the number of literary sources that were identified during the literature review is 180. After excluding publications that did not match the search criteria, the total number of articles included in the systematic review was determined to be 68. CONCLUSIONS: polyhexanide is a promising solution for infected root canal irrigation. The antibacterial activity of this substance is suitable for the elimination of pathogens responsible for the appearance of apical periodontitis.

Ex vivo wound model on porcine skin for the evaluation of the antibiofilm activity of polyhexamethylene biguanide and ciprofloxacin.

This study aimed to standardize the use of an ex vivo wound model for the evaluation of compounds with antibiofilm activity. The in vitro susceptibility of Staphylococcus aureus ATCC 29213 and Pseudomonas aeruginosa ATCC 27853 to ciprofloxacin and polyhexamethylene biguanide (PHMB) was evaluated in planktonic and biofilm growth. The effects of ciprofloxacin and PHMB on biofilms grown on porcine skin explants were evaluated by colony-forming unit (CFU) counting and confocal microscopy. Minimum inhibitory concentrations (MICs) against S. aureus and P. aeruginosa were, respectively, 0.5 and 0.25 µg mL-1 for ciprofloxacin, and 0.78 and 6.25 µg mL-1 for PHMB. Minimum biofilm eradication concentrations (MBECs) against S. aureus and P. aeruginosa were, respectively, 2 and 8 µg mL-1 for ciprofloxacin, and 12.5 and >25 µg mL-1 for PHMB. Ciprofloxacin reduced (P < 0.05) log CFU counts of the biofilms grown ex vivo by 3 and 0.96 for S. aureus and P. aeruginosa, respectively, at MBEC, and by 0.58 and 8.12 against S. aureus and P. aeruginosa, respectively, at 2xMBEC. PHMB (100 µg/mL) reduced (P < 0.05) log CFU counts by 0.52 for S. aureus and 0.68 log for P. aeruginosa, leading to an overall decrease (P < 0.05) in biofilm biomass. The proposed methodology to evaluate the susceptibility of biofilms grown ex vivo led to reproducible and reliable results.

Polyhexamethylene biguanide and its antimicrobial role in wound healing: a narrative review.

A wound offers an ideal environment for the growth and proliferation of a variety of microorganisms which, in some cases, may lead to localised or even systemic infections that can be catastrophic for the patient; the development of biofilms exacerbates these infections. Over the past few decades, there has been a progressive development of antimicrobial resistance (AMR) in microorganisms across the board in healthcare sectors. Such resistant microorganisms have arisen primarily due to the misuse and overuse of antimicrobial treatments, and the subsequent ability of microorganisms to rapidly change and mutate as a defence mechanism against treatment (e.g., antibiotics). These resistant microorganisms are now at such a level that they are of grave concern to the World Health Organization (WHO), and are one of the leading causes of illness and mortality in the 21st century. Treatment of such infections becomes imperative but presents a significant challenge for the clinician in that treatment must be effective but not add to the development of new microbes with AMR. The strategy of antimicrobial stewardship (AMS) has stemmed from the need to counteract these resistant microorganisms and requires that current antimicrobial treatments be used wisely to prevent amplification of AMR. It also requires new, improved or alternative methods of treatment that will not worsen the situation. Thus, any antimicrobial treatment should be effective while not causing further development of resistance. Some antiseptics fall into this category and, in particular, polyhexamethylene hydrochloride biguanide (PHMB) has certain characteristics that make it an ideal solution to this problem of AMR, specifically within wound care applications. PHMB is a broad-spectrum antimicrobial that kills bacteria, fungi, parasites and certain viruses with a high therapeutic index, and is widely used in clinics, homes and industry. It has been used for many years and has not been shown to cause development of resistance; it is safe (non-cytotoxic), not causing damage to newly growing wound tissue. Importantly there is substantial evidence for its effective use in wound care applications, providing a sound basis for evidence-based practice. This review presents the evidence for the use of PHMB treatments in wound care and its alignment with AMS for the prevention and treatment of wound infection.

Polyhexanide-Releasing Membranes for Antimicrobial Wound Dressings: A Critical Review.

The prevalence of chronic, non-healing skin wounds in the general population, most notably diabetic foot ulcers, venous leg ulcers and pressure ulcers, is approximately 2% and is expected to increase, driven mostly by the aging population and the steady rise in obesity and diabetes. Non-healing wounds often become infected, increasing the risk of life-threatening complications, which poses a significant socioeconomic burden. Aiming at the improved management of infected wounds, a variety of wound dressings that incorporate antimicrobials (AMDs), namely polyhexanide (poly(hexamethylene biguanide); PHMB), have been introduced in the wound-care market. However, many wound-care professionals agree that none of these wound dressings show comprehensive or optimal antimicrobial activity. This manuscript summarizes and discusses studies on PHMB-releasing membranes (PRMs) for wound dressings, detailing their preparation, physical properties that are relevant to the context of AMDs, drug loading and release, antibacterial activity, biocompatibility, wound-healing capacity, and clinical trials conducted. Some of these PRMs were able to improve wound healing in in vivo models, with no associated cytotoxicity, but significant differences in study design make it difficult to compare overall efficacies. It is hoped that this review, which includes, whenever available, international standards for testing AMDs, will provide a framework for future studies.

Effectiveness of polyhexamethylene biguanide, chlorhexidine, and calcium hydroxide intracanal medicament against intraradicular mature polymicrobial biofilm: A microbiological study.

Aim: To compare the effectiveness of different intracanal medicaments against polymicrobial biofilm formed by Enterococcus faecalis, Staphylococcus aureus, and Candida albicans. Materials and Methods: Eighty mature human roots with intraradicular polymicrobial biofilm were randomly assigned into four groups (n = 20). Intracanal medicaments 0.2% polyhexamethylene biguanide (PHMB), 2% chlorhexidine (CHX), and calcium hydroxide (CH) were applied into the root canals. Collected dentine samples were tested at 7th, 15th, and 30th day for microbial growth, and the colony-forming units per ml (CFU/ml) were determined. Results: The CFU/ml data were analyzed using unpaired t-test and one-way ANOVA-F comparison test. All medicaments resulted in a significant reduction (P < 0.05) in microbial growth at all time intervals compared to the control group. CHX and PHMB showed a similar reduction in CFU/ml at 7th and 15th day but significantly more than CH at all time intervals. At 30th day, PHMB caused a significantly more reduction in CFU/ml than CHX. Conclusions: All the three tested intracanal medicaments such as CH, CHX, and PHMB Gel were effective in reducing the microbial count. CH has a limited antimicrobial effect against the polymicrobial biofilm found inside the root canal. 2% CHX gel has a time-dependent antimicrobial effect. PHMB has a superior antimicrobial effect in comparison with CHX and CH.

Mechanism of Polyhexamethylene Biguanide Resistance in Purpureocillium lilacinum Strains.

Purpureocillium lilacinum has been recently found to contaminate a 20% (200,000 µg/mL) aqueous solution of polyhexamethylene biguanide hydrochloride (PHMB) . We aimed to elucidate the mechanism underlying the resistance of P. lilacinum to PHMB. First, we induced the PHMB-resistant (IR) strains IFM 67050 (IR) and IFM 65838 (IR) from the type strain P. lilacinum CBS 284.36T via cultivation in a medium containing high concentrations of PHMB. We then analyzed the DNA sequences via Illumina sequencing to evaluate the presence of genetic mutations in IFM 65838 (IR) . Further, we established an IFM 65838 (IR) uridine/uracil auxotrophic strain, and using the orotidine-5'-decarboxylase gene, pyrG as a selection marker, we tried to knockout a mutant gene in IFM 65838 (IR) using the CRISPR-Cas9 genome-editing technique. The growth rates of IFM 67050 (IR) and IFM 65838 (IR) in medium containing PHMB increased, and the minimum inhibitory concentrations (MICs) against PHMB also increased. Based on the DNA sequence analysis, we found a nonsynonymous point mutation in the gene PLI-008146 (G779A) in IFM 67050 (IR) and IFM 65838 (IR) . This point mutation leads to site combinations of splicing changes that cause partial sequences deletion (p.Y251_G281del) in the ΔPLI-008146 locus of IFM 65838 (IR) , and deletion sequences include partial adenosine/AMP deaminase motif (PF00962) orthologous to adenosine deaminase (ADA) (GeneBank: OAQ82383.1) . Furthermore, the mutant gene ΔPLI-008146 was successfully knocked out from the resistanceinduced strain using a novel CRISPR-Cas9 gene transformation method. A considerable reduction in growth rate and MIC against PHMB was observed in the absence of the mutant gene. Therefore, ADA may represent an important resistance factor in PHMB-resistant P. lilacinum.

Polyhexamethylene biguanide hydrochloride (PHMB)-properties and application of an antiseptic agent. A narrative review.

The prevention and management of ocular surface infections is still one of the great challenges for ophthalmologists. The spread of antimicrobial resistance makes it necessary to use antiseptic substances with a broad antimicrobial spectrum. Polyhexamethylene biguanide hydrochloride (Polyhexanide, PHMB) is a broad-spectrum antiseptic with excellent tolerance and a low-risk profile. Its physicochemical action on the phospholipid membrane and DNA replication or repair mechanism, prevents or impedes the development of resistant bacterial strains. PHMB revealed its effective against numerous organisms like viruses, Gram-negative and Gram-positive bacteria, and fungi. Polyhexanide is commonly used as preservative in commercially available disinfecting solutions for contact lens care and in ophthalmic formulations at different concentrations ranging from 1 µg/ml to 50 µg/ml. The administration of 0.02% (200 µg/ml) PHMB is often the first-line therapy of Acanthamoeba keratitis. However, to date, only one close-out randomized controlled study tested the efficacy of 0.02% PHMB in Acanthamoeba keratitis and a phase III study is still ongoing. This paper reviews the antiseptic agent PHMB, focusing on biochemical mechanisms, safety profile and applications in ophthalmology.

Modulatory Contribution of Oxygenating Hydrogels and Polyhexamethylene Biguanide on the Antimicrobial Potency of Neutrophil-like Cells.

Neutrophils are a first line of host defense against infection and utilize a series of oxygen-dependent processes to eliminate pathogens. Research suggests that oxygen availability can improve anti-infective mechanisms by promoting the formation of reactive oxygen species. Also, oxygen can synergistically upregulate the antibacterial properties of certain antibiotics against bacteria by altering their metabolism and causing an increase in the antibiotic uptake of bacteria. Therefore, understanding the effects of oxygen availability, as provided via a biomaterial treatment alone or along with potent antibacterial agents, on neutrophil functions can lead us to the development of new anti-inflammatory and anti-infective approaches. However, the study of neutrophil functions in vitro is often limited by their short life span and nonreproducibility, which suggests the need for cell line-based models as a substitute for primary neutrophils. Here, we took advantage of the differentiated human leukemia-60 cell line (HL-60), as an in vitro neutrophil model, to test the effects of local oxygen and antibacterial delivery by fluorinated methacrylamide chitosan (MACF) hydrogels incorporated with polyhexamethylene biguanide (PHMB) antibacterial agent. Considering the natural modes of neutrophil actions to combat bacteria, we studied the impact of our dual functioning oxygenating-antibacterial platforms on neutrophil phagocytosis and antibacterial properties as well as the formation of neutrophil extracellular traps (NETs) and reactive oxygen species (ROS). Our results demonstrated that supplemental oxygen and antibacterial delivery from MACF-PHMB hydrogel platforms upregulated neutrophil antibacterial properties and ROS production. NET formation by neutrophils upon treatment with MACF and PHMB varied when chemical and biological stimuli were used. Overall, this study presents a model to study immune responses in vitro and lays the foundation for future studies to investigate if similar responses also occur in vivo.