A study of hydrophobic domain formation of polymeric drug precipitation inhibitors in aqueous solution.

Despite the widespread use of polymers as precipitation inhibitors in supersaturating drug formulations, the current understanding of their mechanisms of action is still incomplete. Specifically, the role of hydrophobic drug interactions with polymers by considering possible supramolecular conformations in aqueous dispersion is an interesting topic. Accordingly, this study investigated the tendency of polymers to create hydrophobic domains, where lipophilic compounds may nest to support drug solubilisation and supersaturation. Fluorescence spectroscopy with the environment-sensitive probe pyrene was compared with atomistic molecular dynamics simulations of the model drug fenofibrate (FENO). Subsequently, kinetic drug supersaturation and thermodynamic solubility experiments were conducted. As a result, the different polymers showed hydrophobic domain formation to a varying degree and the molecular simulations supported interpretation of fluorescence spectroscopy data. Molecular insights were gained into the conformational structure of how the polymers interacted with FENO in solution phase, which apart from nucleation and crystal growth effects, determined drug concentrations in solution. Notable was that even at the lowest polymer concentration of 0.01 %, w/v, there were polymer-specific solubilisation effects of FENO observed and the resulting reduction in apparent drug supersaturation provided relevant knowledge both from a mechanistic and practical perspective.

Addition of sodium malonate alters the morphology and increases the critical flux during tangential flow filtration of precipitated immunoglobulins.

Recent studies have demonstrated that one can control the packing density, and in turn the filterability, of protein precipitates by changing the pH and buffer composition of the precipitating solution to increase the structure/order within the precipitate. The objective of this study was to examine the effect of sodium malonate, which is known to enhance protein crystallizability, on the morphology of immunoglobulin precipitates formed using a combination of ZnCl2 and polyethylene glycol. The addition of sodium malonate significantly stabilized the precipitate particles as shown by an increase in melting temperature, as determined by differential scanning calorimetry, and an increase in the enthalpy of interaction, as determined by isothermal titration calorimetry. The sodium malonate also increased the selectivity of the precipitation, significantly reducing the coprecipitation of DNA from a clarified cell culture fluid. The resulting precipitate had a greater packing density and improved filterability, enabling continuous tangential flow filtration with minimal membrane fouling relative to precipitates formed under otherwise identical conditions but in the absence of sodium malonate. These results provide important insights into strategies for controlling precipitate morphology to enhance the performance of precipitation-filtration processes for the purification of therapeutic proteins.

Cyanobacterial Biocrust on Biomineralized Soil Mitigates Freeze-Thaw Effects and Preserves Structure and Ecological Functions.

Biocrust inoculation and microbially induced carbonate precipitation (MICP) are tools used in restoring degraded arid lands. It remains unclear whether the ecological functions of the two tools persist when these methods are combined and subjected to freeze-thaw (FT) cycles. We hypothesized a synergetic interaction between MICP treatment and biocrust under FT cycles, which would allow both components to retain their ecological functions. We grew cyanobacterial (Nostoc commune) biocrusts on bare soil and on MICP (Sporosarcina pasteurii)-treated soil, subjecting them to repeated FT cycles simulating the Mongolian climate. Generalized linear modeling revealed that FT cycling did not affect physical structure or related functions but could increase the productivity and reduce the nutrient condition of the crust. The results confirm the high tolerance of MICP-treated soil and biocrust to FT cycling. MICP treatment + biocrust maintained higher total carbohydrate content under FT stress. Our study indicates that biocrust on biomineralized soil has a robust enough structure to endure FT cycling during spring and autumn and to promote restoration of degraded lands.

Vertical structures and microphysical characteristics of summer precipitation in North China detected by GPM-DPR.

The vertical structure and microphysical characteristics of stratiform precipitation (SP) and convective precipitation (CP) in North China are revealed based on the GPM-DPR product during boreal summer of 2014-2021 in this study. Additionally, the differences in precipitation features between the mountain and the plain are investigated. Under the combined influence of climatic factors and local topography, the precipitation amount is larger in the plain than in the mountain while precipitation frequency exhibits an opposite pattern. The proportions of the two precipitation types are similar in the mountain and the plain, with CP contributing to approximately a quarter of total precipitation frequency. In terms of mean intensity, both SP and CP are roughly 20 % more intense in the plain than in the mountain. The greater number of light SPs is a major contributor to higher precipitation frequency in the mountain, while more intense CPs result in larger precipitation amount in the plain. Compared to the mountain, the precipitation system is deeper in the plain, where higher storm top altitudes (STAs) and larger freezing level heights contribute to more intense CPs. Besides, it is observed that for the STA, more intense CPs occur in the plain compared to the mountain. In both the mountain and the plain, the coalescence process is dominant in the low-level layers for heavy (8-20 mm/h) to storm-level (>20 mm/h) CPs. Compared to the mountain, the low-level growth of hydrometeor size and radar reflectivity is more significant in the plain. These findings are important to quantitative precipitation estimation and precipitation prediction in the mountainous region, and can help understand the influence of local topography on precipitation.

Facile synthesis of Bi3O(OH)(AsO4)2 and simultaneous photocatalytic oxidation and adsorption of Sb(III) from wastewater.

Antimony (Sb) decontamination in water is necessary owing to the worsening pollution which seriously threatens human life safety. Designing bismuth-based photocatalysts with hydroxyls have attracted growing interest because of the broad bandgap and enhanced separation efficiency of photogenerated electron/hole pairs. Until now, the available photocatalysis information regarding bismuth-based photocatalysts with hydroxyls has remained scarce and the contemporary report has been largely limited to Bi3O(OH)(PO4)2 (BOHP). Herein, Bi3O(OH)(AsO4)2 (BOHAs), a novel ultraviolet photocatalyst, was fabricated via the co-precipitation method for the first time, and developed to simultaneous photocatalytic oxidation and adsorption of Sb(III). The rate constant of Sb(III) removal by the BOHAs was 32.4, 3.0, and 4.3 times higher than those of BiAsO4, BOHP, and TiO2, respectively, indicating that the introduction of hydroxyls could increase the removal of Sb(III). Additionally, the crucial operational parameters affecting the adsorption performance (catalyst dosage, concentration, pH, and common anions) were investigated. The BOHAs maintained 85% antimony decontamination of the initial yield after five successive cycles of photocatalysis. The Sb(III) removal involved photocatalytic oxidation of adsorbed Sb(III) and subsequent adsorption of the yielded Sb(V). With the acquired knowledge, we successfully applied the photocatalyst for antimony removal from industrial wastewater. In addition, BOHAs could also be powerful photocatalysts in the photodegradation of organic pollutants studies of which are ongoing. It reveals an effective strategy for synthesizing bismuth-based photocatalysts with hydroxyls and enhancing pollutants' decontamination.

Record-High Thermoelectric Performance in Al-Doped ZnO via Anderson Localization of Band Edge States.

Oxides are of interest for thermoelectrics due to their high thermal stability, chemical inertness, low cost, and eco-friendly constituting elements. Here, adopting a unique synthesis route via chemical co-precipitation at strongly alkaline conditions, one of the highest thermoelectric performances for ZnO ceramics ( P F max = $PF_{\text{max}} =$  21.5 µW cm-1 K-2 and z T max = $zT_{\text{max}} =$  0.5 at 1100 K in Zn 0.96 Al 0.04 O ${\rm Zn}_{0.96} {\rm Al}_{0.04}{\rm O}$ ) is achieved. These results are linked to a distinct modification of the electronic structure: charge carriers become trapped at the edge of the conduction band due to Anderson localization, evidenced by an anomalously low carrier mobility, and characteristic temperature and doping dependencies of charge transport. The bi-dimensional optimization of doping and carrier localization enable a simultaneous improvement of the Seebeck coefficient and electrical conductivity, opening a novel pathway to advance ZnO thermoelectrics.

Dynamic regulation of water potential in Juniperus osteosperma mediates ecosystem carbon fluxes.

Some plants exhibit dynamic hydraulic regulation, in which the strictness of hydraulic regulation (i.e. iso/anisohydry) changes in response to environmental conditions. However, the environmental controls over iso/anisohydry and the implications of flexible hydraulic regulation for plant productivity remain unknown. In Juniperus osteosperma, a drought-resistant dryland conifer, we collected a 5-month growing season time series of in situ, high temporal-resolution plant water potential ( Ψ $$ \Psi $$ ) and stand gross primary productivity (GPP). We quantified the stringency of hydraulic regulation associated with environmental covariates and evaluated how predawn water potential contributes to empirically predicting carbon uptake. Juniperus osteosperma showed less stringent hydraulic regulation (more anisohydric) after monsoon precipitation pulses, when soil moisture and atmospheric demand were high, and corresponded with GPP pulses. Predawn water potential matched the timing of GPP fluxes and improved estimates of GPP more strongly than soil and/or atmospheric moisture, notably resolving GPP underestimation before vegetation green-up. Flexible hydraulic regulation appears to allow J. osteosperma to prolong soil water extraction and, therefore, the period of high carbon uptake following monsoon precipitation pulses. Water potential and its dynamic regulation may account for why process-based and empirical models commonly underestimate the magnitude and temporal variability of dryland GPP.

Enhanced Piezocatalytic Performance of Li-doped BaTiO3 Through a Facile Sonication-Assisted Precipitation Approach.

Piezocatalysis-induced dye degradation has garnered significant attention as an effective method for addressing wastewater treatment challenges. In our study, we employed a room-temperature sonochemical method to synthesize piezoelectric barium titanate nanoparticles (BaTiO3: BTO) with varying levels of Li doping. This approach not only streamlined the sample preparation process but also significantly reduced the overall time required for synthesis, making it a highly efficient and practical method. One of the key findings was the exceptional performance of the Li-doped BTO nanoparticles. With 20 mg of Li additive, we achieved 90% removal of Rhodamine B (RhB) dye within a relatively short timeframe of 150 minutes, all while subjecting the sample to ultrasonic vibration. This rapid and efficient dye degradation was further evidenced by the calculated kinetic rate constant, which indicated seven times faster degradation rate compared to pure BTO. The enhanced piezoelectric performance observed in the Li-doped BTO nanoparticles can be attributed to the strategic substitution of Li atoms, which facilitated a more efficient transfer of charge charges at the interface. Overall, our study underscores the potential of piezocatalysis coupled with advanced materials like Li-doped BTO nanoparticles as a viable and promising solution for wastewater treatment, offering both efficiency and environmental sustainability.

Unlocking the potential of magnetic biochar in wastewater purification: a review on the removal of bisphenol A from aqueous solution.

Bisphenol A (BPA) is an essential and extensively utilized chemical compound with significant environmental and public health risks. This review critically assesses the current water purification techniques for BPA removal, emphasizing the efficacy of adsorption technology. Within this context, we probe into the synthesis of magnetic biochar (MBC) using co-precipitation, hydrothermal carbonization, mechanical ball milling, and impregnation pyrolysis as widely applied techniques. Our analysis scrutinizes the strengths and drawbacks of these techniques, with pyrolytic temperature emerging as a critical variable influencing the physicochemical properties and performance of MBC. We explored various modification techniques including oxidation, acid and alkaline modifications, element doping, surface functional modification, nanomaterial loading, and biological alteration, to overcome the drawbacks of pristine MBC, which typically exhibits reduced adsorption performance due to its magnetic medium. These modifications enhance the physicochemical properties of MBC, enabling it to efficiently adsorb contaminants from water. MBC is efficient in the removal of BPA from water. Magnetite and maghemite iron oxides are commonly used in MBC production, with MBC demonstrating effective BPA removal fitting well with Freundlich and Langmuir models. Notably, the pseudo-second-order model accurately describes BPA removal kinetics. Key adsorption mechanisms include pore filling, electrostatic attraction, hydrophobic interactions, hydrogen bonding, π-π interactions, and electron transfer surface interactions. This review provides valuable insights into BPA removal from water using MBC and suggests future research directions for real-world water purification applications.

Struvite and ethylenediaminedisuccinic acid (EDDS) enhance electrokinetic-biological permeable reactive barrier removal of copper and lead from contaminated loess.

Removal of heavy metals using the electrokinetic (EK) remediation technology is restricted by soils containing a fraction of clay particles above 12%. Furthermore, it is also affected by hydroxide precipitation (focusing phenomenon) close to the cathode. A modified EK reactor containing a permeable reactive barrier (PRB) was proposed herein where the enzyme-induced carbonate precipitation (EICP) treatment was incorporated into the PRB. Despite that, NH4+-N pollution induced by the urea hydrolysis resulting from the EICP treatment causes serious threats to surrounding environments and human health. There were four types of tests applied to the present work, including CP, TS1, TS2, and TS3 tests. CP test neglected the bio-PRB, while TS1 test considered the bio-PRB. TS2 test based on TS1 test tackled NH4+-N pollution using the struvite precipitation technology. TS3 test based on TS2 test applied EDDS to enhance the removal of Cu and Pb. In CP test, the removal efficiency applied to Cu and Pb removals was as low as approximately 10%, presumably due to the focusing phenomenon. The removal efficiency was elevated to approximately 24% when the bio-PRB and the electrolyte reservoir were involved in TS1 test. TS2 test indicated that the rate of struvite precipitation was 40 times faster than the ureolysis rate, meaning that the struvite precipitate had sequestered NH4+ before it started threatening surrounding environments. The chelation between Cu2+ and EDDS took place when EDDS played a part in TS3 test. It made Cu2+ negatively surface charged by transforming Cu2+ into EDDSCu2-. The chelation caused those left in S4 and S4 to migrate toward the bio-PRB, whereas it also caused those left in S1 and S2 to migrate toward the anode. Due to this reason, the fraction of Cu2+ removed by the bio-PRB and the electrolyte reservoir is raised to 32% and 26% respectively, and the fraction of remaining Cu was reduced to 41%. Also, the removal efficiency applied to Pb removal was raised to 50%. Results demonstrate the potential of struvite and EDDS-assisted EK-PRB technology as a cleanup method for Cu- and Pb-contaminated loess.

Climate of the Pyrenees: Extremes indices and long-term trends.

We utilized an extensive, multisource, cross-border dataset of daily meteorological observations from over 1500 stations in the Pyrenees, spanning from the mid-20th century to 2020, to examine the spatial and temporal climate patterns. Our focus was on 17 indices related to extreme precipitation and temperature events across the mountain range. The original data underwent rigorous quality control and homogenization processes, employing a comprehensive workflow that included spatial modeling based on environmental predictors. This process yielded two main outcomes: 1) a high-resolution gridded dataset (1 km2) of daily precipitation, maximum and minimum temperature from 1981 to 2020, allowing for a detailed analysis of spatial variations; and 2) an evaluation of long-term annual and seasonal trends from 1959 to 2020, using selection of high-quality data series that were homogenized to preserve their temporal structure and coherence. The findings revealed a clear elevation-related pattern in temperature indices (with the exception of tropical nights, which were predominantly observed on the Mediterranean side) and a distinct north-south latitudinal disparity in precipitation, turning longitudinal when focusing on extreme precipitation events. Overall, there was a notable and significant warming trend of 0.2 to 0.4 °C per decade, and a non-significant change of precipitation, with the exception of the southern and Mediterranean regions, where there was a notable decrease, approximately -3 % per decade, observed on an annual basis.

Drug Crystal Precipitation in Biorelevant Bicarbonate Buffer: A Well-Controlled Comparative Study with Phosphate Buffer.

The purpose of the present study was to clarify whether the precipitation profile of a drug in bicarbonate buffer (BCB) may differ from that in phosphate buffer (PPB) by a well-controlled comparative study. The precipitation profiles of structurally diverse poorly soluble drugs in BCB and PPB were evaluated by a pH-shift precipitation test or a solvent-shift precipitation test (seven weak acid drugs (pKa: 4.2 to 7.5), six weak base drugs (pKa: 4.8 to 8.4), one unionizable drug, and one zwitterionic drug). To focus on crystal precipitation processes, each ionizable drug was first completely dissolved in an HCl (pH 3.0) or NaOH (pH 11.0) aqueous solution (450 mL, 50 rpm, 37 °C). A 10-fold concentrated buffer solution (50 mL) was then added to shift the pH value to 6.5 to initiate precipitation (final volume: 500 mL, buffer capacity (ß): 4.4 mM/ΔpH (BCB: 10 mM or PPB: 8 mM), ionic strength (I): 0.14 M (adjusted by NaCl)). The pH, ß, and I values were set to be relevant to the physiology of the small intestine. For an unionizable drug, a solvent-shift method was used (1/100 dilution). To maintain the pH value of BCB, a floating lid was used to avoid the loss of CO2. The floating lid was applied also to PPB to precisely align the experimental conditions between BCB and PPB. The solid form of the precipitants was identified by powder X-ray diffraction and differential scanning microscopy. The precipitation of weak acids (pKa ≤ 5.1) and weak bases (pKa ≥ 7.3) was found to be slower in BCB than in PPB. In contrast, the precipitation profiles in BCB and PPB were similar for less ionizable or nonionizable drugs at pH 6.5. The final pH values of the bulk phase were pH 6.5 ± 0.1 after the precipitation tests in all cases. All precipitates were in their respective free forms. The precipitation of ionizable weak acids and bases was slower in BCB than in PPB. The surface pH of precipitating particles may have differed between BCB and PPB due to the slow hydration process of CO2 specific to BCB. Since BCB is a physiological buffer in the small intestine, it should be considered as an option for precipitation studies of ionizable weak acids and bases.

Can IMERG QPE product capture the heavy rain on urban flood scale?

Urban areas are increasingly vulnerable to sudden flooding disasters caused by intense rainfall and high imperviousness degree, resulting in great economic losses and human casualties. Interactions between rainfall data and urban catchment characteristics highlight the urgent need of accurate and effective precipitation data to apply in reliable hydrological simulations. However, it remains a challenge to obtain accurate rainfall datasets on such small scales in urban areas. As satellite remote sensing is the only method that can achieve global observation, it is important to evaluate satellite precipitation products in their ability to accurately capture intense precipitation on urban flood scales. This study evaluates the performance of the latest version 06B (V06B) Integrated Multi-satellitE Retrievals for Global Precipitation Measurement (IMERG) in North China Plain, with using the Radar-Gauge merged precipitation estimates as reference data. First, it could be concluded that IMERG fails to accurately estimate precipitation in the whole study area, having the problem of overestimating light precipitation and underestimating heavy precipitation. Second, results show that IMERG has poor ability to capture heavy precipitation on small scales, with the percentage of Hit nearly 0 and the percentage of Miss higher than 40 % for all the precipitation cases. Third, with the expansion of heavy precipitation centers' coverage, the problem of IMERG not to detect heavy precipitation gets mitigated, with the percentage of Miss decreasing by 14 % (19 %). However, the ability to capture both spatial location and precipitation intensity is still not good, the percentage of Hit ranging from 0.05 % to 7 %, without obvious improvement. When IMERG is able to capture the center of strong precipitation, it also tends to overestimate the weak precipitation around the center of strong precipitation. Results of this study provide an improved understanding of how well the V06B IMERG products capture the heavy precipitation center at small scales in urban areas, which will be useful for both developers and users of IMERG.

Non-linear response of Norway spruce to climate variation along elevational and age gradients in the Carpathians.

Climate change, namely increased warming coupled with a rise in extreme events (e.g., droughts, storms, heatwaves), is negatively affecting forest ecosystems worldwide. In these ecosystems, growth dynamics and biomass accumulation are driven mainly by environmental constraints, inter-tree competition, and disturbance regimes. Usually, climate-growth relationships are assessed by linear correlation due to the simplicity and straightforwardness of modeling. However, applying this method may bias results, since the ecological and physiological responses of trees to environmental factors are non-linear, and usually bell-shaped. In the Eastern Carpathian, Norway spruce is at the southeasternmost edge of its natural occurrence; this region is thus potentially vulnerable to climate change. A non-linear assessment of climate-growth relationships using machine-learning techniques for Norway spruce in this area had not been conducted prior to this study. To address this knowledge gap, we analyzed a large tree-ring network from 158 stands, with over 3,000 trees of varying age distributed along an elevational gradient. Our results showed that non-linearity in the growth-climate response of spruce was season-specific: temperatures from the previous autumn and current growing season, along with water availability during winter, induced a bell-shaped response. Moreover, we found that at low elevations, spruce growth was mainly limited by water availability in the growing season, while winter temperatures are likely to have had a slight influence along the entire elevational gradient. Furthermore, at elevations lower than 1400 m, spruce trees were also found to be sensitive to previous autumn water availability. Overall, our results shed new light on the response of Norway spruce to climate in the Carpathians, which may aid in management decisions.

Meta-analysis reveals that the effects of precipitation change on soil and litter fauna in forests depend on body size.

Anthropogenic climate change is altering precipitation regimes at a global scale. While precipitation changes have been linked to changes in the abundance and diversity of soil and litter invertebrate fauna in forests, general trends have remained elusive due to mixed results from primary studies. We used a meta-analysis based on 430 comparisons from 38 primary studies to address associated knowledge gaps, (i) quantifying impacts of precipitation change on forest soil and litter fauna abundance and diversity, (ii) exploring reasons for variation in impacts and (iii) examining biases affecting the realism and accuracy of experimental studies. Precipitation reductions led to a decrease of 39% in soil and litter fauna abundance, with a 35% increase in abundance under precipitation increases, while diversity impacts were smaller. A statistical model containing an interaction between body size and the magnitude of precipitation change showed that mesofauna (e.g. mites, collembola) responded most to changes in precipitation. Changes in taxonomic richness were related solely to the magnitude of precipitation change. Our results suggest that body size is related to the ability of a taxon to survive under drought conditions, or to benefit from high precipitation. We also found that most experiments manipulated precipitation in a way that aligns better with predicted extreme climatic events than with predicted average annual changes in precipitation and that the experimental plots used in experiments were likely too small to accurately capture changes for mobile taxa. The relationship between body size and response to precipitation found here has far-reaching implications for our ability to predict future responses of soil biodiversity to climate change and will help to produce more realistic mechanistic soil models which aim to simulate the responses of soils to global change.

Structural characterization and immunostimulant activities of polysaccharides fractionated by gradient ethanol precipitation method from Panax ginseng C. A. Meyer.

Panax ginseng C. A. Meyer is a dual-purpose plant for medicine and food, its polysaccharide is considered as an immune enhancer. Four polysaccharides, WGP-20-F, WGP-40-F, WGP-60-F and WGP-80-F were obtained from ginseng via water extraction and gradient ethanol precipitation with different molecular weights (Mw) of 1.720 × 106, 1.434 × 106, 4.225 × 104 and 1.520 × 104 Da, respectively. WGP-20-F and WGP-40-F which with higher Mw and a triple-helix structure are glucans composed of 4-ɑ-Glcp, do not show remarkable immunoregulatory effects. WGP-60-F and WGP-80-F are heteropolysaccharides mainly composed of 4-ɑ-Glcp and also contain t-ɑ-Araf, 5-ɑ-Araf and 3,5-ɑ-Araf. They are spherical branched conformations without a triple-helix structure and can effectively increase the index of immune organs, lymphocyte proliferation, activate macrophages to regulate the immune system in mice and further enhance immune functions by improving delayed-type hypersensitivity reaction and antibody response. These results indicated that WGP-60-F and WGP-80-F could be used as potential immune enhancers, and gradient ethanol precipitation can be applied for the preparation of ginseng bioactive polysaccharide.

Hydroxide-derived Nanostructures: Scalable Synthesis, Characterization, Properties and Potential Applications.

Metal oxide nanostructures have received an increasing attention owing to their unique chemical and physical properties along with their widespread applications in various fields. In this article, we provide an overview of our recent discovery - christened Hydroxides-Derived Nanostructures, or HDNs - in which we react hydroxide aqueous solutions (mostly tetramethylammonium hydroxide, TMAH) at temperatures < 100 °C and under atmospheric pressure with various metal-containing precursors to scalably prepare novel metal oxide nanostructures. In one case, we converted a dozen commercial and earth abundant Ti-containing powders such as binary carbides, nitrides, borides, among others, into new, one-dimensional TiO2-based lepidocrocite (1DL) nanofilaments (NFs). Application-wise, 1DLs show outstanding performance in a number of energy, environmental, and biomedical fields such as photo- and electrocatalysis, water splitting, lithium-sulfur and lithium-ion batteries, water purification, dye degradation, cancer therapy, and polymer composites. In addition to 1DL, the HDNs family encompasses other metal oxides nanostructures including magnetic Fe3O4 nanoparticles and MnO2 birnessite-based crystalline two-dimensional (2D) flakes. The latter showed promise as a bifunctional electrocatalyst for water oxidation and oxygen reduction, as well as cathodes in aqueous asymmetric supercapacitor and in an aqueous ammonium ion battery. Our developed recipe provides a new vista in the molecular self-assembly synthesis of metal oxide nanomaterials that can advance the field with a library of novel nanostructures with substantial implications in a multitude of fields. This article is protected by copyright. All rights reserved.

A long-term study on the impact of climatic variables on two common nest-dwelling ectoparasites of the Eurasian blue tit (Cyanistes caeruleus).

We explored the potential influence of temperature and precipitation on the abundance of two nest-dwelling ectoparasites (blowflies and mites) of Eurasian blue tits (Cyanistes caeruleus) during a period of 21 years and compared the results with those of a shorter period. The abundance of blowflies was negatively related to precipitation, which could prevent flies from locating their host, and laying date. In addition, blowflies were positively related to brood size (more food implies more parasites) and the interaction between precipitation and temperature. The highest abundances of blowfly pupae were attained in conditions of increasing precipitation and decreasing temperature, which should be more common at the beginning of the bird breeding season. Mites were significantly and positively related to laying date and the interaction between average precipitation and temperature but only for the larger dataset. Higher abundances of mites were related to intermediate values of temperature and precipitations, conditions that are found at the end of the breeding season. These results imply that optimal conditions for both parasites differ, with blowflies preferring earlier breeders and colder and more humid conditions than mites. Thus, the effects of the climatic conditions studied on parasite abundances are non-monotonic and can vary with years and parasite species. Finally, the fact that average temperature and precipitation decreases across the years of study is probably due to the advancement in Eurasian blue tit laying date because we calculated those variables for the period of birds' reproduction. This earlier nesting does not affect parasite abundance.

Revealing climatic and groundwater impacts on the spatiotemporal variations in vegetation coverage in marine sedimentary basins of the North China Plain, China.

The North China Plain (NCP) is one of the three great plains in China and also serves as a vital region for grain, cotton, and oil production. Under the influence of regional hydrothermal changes, groundwater overexploitation, and seawater intrusion, the vegetation coverage is undergoing continuous alterations. However, a comprehensive assessment of impacts of precipitation, temperature, and groundwater on vegetation in marine sedimentary regions of the NCP is lacking. Heilonggang Basin (HB) is located in the low-lying plain area in the east of NCP, which is part of the NCP. In this study, the HB was chosen as a typical area of interest. We collected a series of data, including the Normalized Difference Vegetation Index (NDVI), precipitation, temperature, groundwater depth, and Total Dissolved Solids (TDS) from 2001 to 2020. Then the spatiotemporal variation in vegetation was analyzed, and the underlying driving mechanisms of vegetation variation were explored in this paper. The results show that NDVI experiences a rapid increase from 2001 to 2004, followed by stable fluctuations from 2004 to 2020. The vegetation in the HB has achieved an overall improvement in the past two decades, with 76% showing improvement, mainly in the central and eastern areas, and 24% exhibiting deterioration in other areas. From 2001 to 2020, NDVI correlates positively with precipitation, whereas its relationship with temperature fluctuates between positive and negative, and is not statistically significant. There is a threshold for the synergistic change of NDVI and groundwater depth. When the groundwater depth is lower than 3.8 m, NDVI increases sharply with groundwater depth. However, beyond this threshold, NDVI tends to stabilize and fluctuate. In the eastern coastal areas, NDVI exhibits a strong positive correlation with groundwater depth, influenced by the surface soil TDS controlled by groundwater depth. In the central regions, a strong negative correlation is observed, where NDVI is primarily impacted by soil moisture under the control of groundwater. In the west and south, a strong positive correlation exists, with NDVI primarily influenced by the intensity of groundwater exploitation. Thus, precipitation and groundwater are the primary driving forces behind the spatiotemporal variability of vegetation in the HB, while in contrast, the influence of temperature is uncertain. This study has elucidated the mechanism of vegetation response, providing a theoretical basis for mitigating adverse factors affecting vegetation growth and formulating rational water usage regulations in the NCP.

A simple assay for measuring tannin-protein precipitation capacity offers insights into the diet and food choice of black howler monkeys (Alouatta pigra).

Phenolics, like tannins, are plant-specialized metabolites that play a protective role against herbivory. Tannins can reduce palatability and bind with proteins to reduce digestibility, acting as deterrents to feeding and impacting nutrient extraction by herbivores. Some assays measure tannin and total phenolics content in plants but lack determination of their biological effects, hindering the interpretation of tannin function in herbivory and its impacts on animal behavior and ecology. In this study, we successfully applied the radial diffusion assay to assess tannin protein precipitation (PP) capacity and evaluate the anti-nutritional effects of tannins in food plants (n = 24) consumed by free-ranging black howler monkeys (Alouatta pigra) in Tabasco, Mexico. We found PP rings in five plant species consumed by the monkeys. The mature fruit of Inga edulis was the most consumed food plant, despite having a high tannin PP capacity (56.66 mg tannic acid equivalent/g dry matter). These findings highlight the presence of tannins in the black howler diet and provide insight into the primates' resilience and potential strategies for coping with anti-nutritional aspects of the diet.