Iron-based electrode material composites for electrochemical sensor application in the environment: A review.

This review explores the expanding role of electrochemical sensors across diverse domains such as environmental monitoring, medical diagnostics, and food quality assurance. In recent years, iron-based electrocatalysts have emerged as promising candidates for enhancing sensor performance. Notable for their non-toxicity, abundance, catalytic activity, and cost-effectiveness, these materials offer significant advantages. However, further investigation is needed to fully understand how iron-based materials' physical, chemical, and electrical properties influence their catalytic performance in sensor applications. It explores the overview of electrochemical sensor technology, examines the impact of iron-based materials and their characteristics on catalytic activity, and investigates various iron-based materials, their advantages, functionalization, and modification techniques. Additionally, the review investigates the application of iron-based electrode material composites in electrochemical sensors for real sample detections. Ultimately, continued research and development in this area promise to unlock new avenues for using iron-based electrode materials in sensor applications.

Cubic structured zinc ferrite methodically incorporated into porous graphene sheets as a selective Electrocatalyst for electrochemical detection of Carbendazim.

Carbendazim (CBZ) insecticides have been widely employed, raising serious concerns about their impacts on human health and the environment. A facile hydrothermal technique was used to prepare a zinc ferrite (ZnFe2O4) combined with porous graphene oxide (PGO) as a nanocomposite for selective CBZ detection. The ZnFe2O4/PGO nanocomposite was then used to modify a glassy carbon electrode (GCE), an affordable platform for CBZ detection. Various spectroscopic techniques were employed to confirm the nanomaterial. The electrochemical properties were further investigated using cyclic voltammetry (CV), differential pulse voltammetry (DPV), and electrochemical impedance spectroscopy (EIS). The ZnFe2O4/PGO nanocomposite modified the glassy carbon electrode surface for CBZ detection. A broad linear response range of 0.0039 to 200 µM, high sensitivity (2.184 µAµM-1 cm-2), a low detection limit of 0.0013 µM, outstanding stability, repeatability, and practical applicability are the intriguing qualities of the ZnFe2O4/PGO-modified electrode for CBZ detection.

Sustainable synthesis of fluorescent polymer carbon dots@PVA for sensitive chlortetracycline detection.

Antibiotic residues persist in the environment and represent serious health hazards; thus, it is important to develop sensitive and effective detection techniques. This paper presents a bio-inspired way to make water-soluble fluorescent polymer carbon dots (PCDs@PVA) by heating biomass precursors and polyvinyl alcohol (PVA) together. For example, the synthesized PCDs@PVA are very stable with enhanced emission intensity. This property was observed in a wide range of environmental conditions, including those with changing temperatures, pH levels, UV light, and ionic strength. PCDs@PVA detected the antibiotic chlortetracycline (CTCs) with great selectivity against structurally related compounds and a low detection limit of 20 nM, demonstrating outstanding sensitivity and specificity. We confirmed the sensor's practical application through real sample analysis, yielding recovery rates of 98%-99% in samples of milk, honey, and river water. The synthesized PCDs@PVA fluorescence sensor was successfully used for CTCs detection in real samples.

Real time monitoring of nerve agent mimics: Novel solid state emitter for enhanced precision and reliability.

Chemical nerve agents are hazardous compounds that terrorists can exploit to pose a significant threat to public safety and national security. The nucleophilic behaviour of these agents enables their interaction with acetyl cholinesterase in the body, leading to paralysis and potentially fatal consequences. Therefore, developing robust and efficient detection methods for these agents is crucial for preventing their misuse. In this manuscript, (E)-12-(1-hydrazineylideneethyl)benzo[f]pyrido[1,2-a]indole-6,11-dione (HBID) is developed as a novel colorimetric and fluorometric probe for the detection of specific chemical nerve agent simulants in both liquid and vapor phase. HBID reacts rapidly with diethyl chlorophosphate (DCP), a common nerve agent simulant, leading to a significant increase in the fluorescence intensity. Under optimized conditions, HBID exhibits high sensitivity, good recyclability, fast response and low limit of detection (0.092 µM). NMR and mass spectral studies suggest that the reaction involves the nucleophilic addition of HBID to DCP, forming a phosphate ester. Additionally, the developed sensor demonstrates viscosity-sensitive AIE phenomena thus greatly expanding its potential applications in biological systems. This sensitivity enables precise detection and visualization of viscosity changes within cellular environments, making the sensor an invaluable tool for studying complex biological processes. The developed probe also detects pH within biologically relevant range (4-6). In practical applications, the probe-treated strips efficiently detected DCP vapor in real time, showing a noticeable fluorescence response. Further, the probe has a strong potential to detect the presence of DCP in the soil samples.

Adaptation of Conductometric Monoenzyme Biosensor for Rapid Quantitative Analysis of L-arginine in Dietary Supplements.

The present study reports on the development, adaptation, and optimization of a novel monoenzyme conductometric biosensor based on a recombinant arginine deiminase (ADI) for the determination of arginine in dietary supplements with a high accuracy of results. Aiming for the highly sensitive determination of arginine in real samples, we studied the effect of parameters of the working buffer solution (its pH, buffer capacity, ionic strength, temperature, and protein concentration) on the sensitivity of the biosensor to arginine. Thus, it was determined that the optimal buffer is a 5 mM phosphate buffer solution with pH 6.2, and the optimal temperature is 39.5 °C. The linear functioning range is 2.5-750 µM of L-arginine with a minimal limit of detection of 2 µM. The concentration of arginine in food additive samples was determined using the developed ADI-based biosensor. Based on the obtained results, the most effective method of biosensor analysis using the method of standard additions was chosen. It was also checked how the reproducibility of the biosensor changes during the analysis of pharmaceutical samples. The results of the determination of arginine in real samples using a conductometric biosensor based on ADI clearly correlated with the data obtained using the method of ion-exchange chromatography and enzymatic spectrophotometric analysis. We concluded that the developed biosensor would be effective for the accurate and selective determination of arginine in dietary supplements intended for the prevention and/or elimination of arginine deficiency.

A Ratiometric Fluorescence Probe Based on Silver Nanoclusters and CdSe/ZnS Quantum dots for the Detection of Hydrogen Peroxide by Aggregation and Etching.

In this study, a ratiometric fluorescence nanoprobe is developed for the analysis of hydrogen peroxide (H2O2). Silver nanoclusters (AgNCs) were synthesized by chemical reduction method using sodium borohydride (NaBH4) as reducing agent, and were coupled with CdSe/ZnS quantum dots (QDs) to form the ratiometric fluorescence nanoprobe silver nanoclusters-quantum dots (AgNCs-QDs). The effect of the volume ratio of CdSe/ZnS QDs to AgNCs on the fluorescence ratio of AgNCs-QDs was investigated. The fluorescence characterization results show that two emission peaks of AgNCs-QDs are located at 473 nm and 661 nm, respectively. Transmission electron microscope (TEM) and X-ray photoelectron spectroscopy (XPS) results show that H2O2 can cause the fluorescence probe to aggregate, while etching AgNCs to produce silver ions, which together cause the fluorescence of the QDs in the ratiometric fluorescent probe to be quenched. Based on this strategy, the fluorescence intensity ratio of the two emission peaks F473/F661 exhibits a strong linear correlation with the concentration of H2O2. The detection range is 3.32 µM ~ 2.65 mM with a detection limit of 3.32 µM. In addition, the ratiometric fluorescence probe can specifically recognize H2O2 and has excellent anti-interference performance and good fluorescence stability. Importantly, the probe was utilized for the detection of H2O2 in serum, showing the possibility of the probe in clinical detection applications.

Sensitive detection of choline and nicotine in real samples by switching upconversion luminescence.

Nicotine (3-(1-methyl-2-pyrrolidinyl)pyridine) is one of the most common addictive substances, causing the trace detection of nicotine to be very necessary. Herein, we designed and prepared a functionalized nanocomposite CS-PAA (NaYF4:19.5%Yb,0.5%Tm@NaYF4-PAA) using a simple method. The nicotine concentration was quantitatively detected through the inhibition of choline oxidase activity by nicotine and the luminescence intensity of CS-PAA being quenched by Fe3+. The mechanism of Fe3+ quenching CS-PAA emission was inferred by luminescence lifetime and UV-vis absorption spectra characterization. During the nicotine detection, both excitation (980 nm) and emission (802 nm) wavelengths of CS-PAA enable the avoidance of the interference of background fluorescence in complicated food objects, thus providing high selectivity and sensitivity with a linear range of 5-750 ng/mL and a limit of detection of 9.3 nM. The method exhibits an excellent recovery and relative standard deviation, indicating high accuracy and repeatability of the detection of nicotine.

Electrochemically Grown Hole-Rich NiO(OH) Thin Films toward Hole-Mediated Very Fast and Selective Enzyme-Free Electrochemical Sensing of Dopamine under Simulated Environment.

This work aimed to develop an enzyme-free semiconductor-assisted electrochemical technique for the selective detection of the neurotransmitter dopamine. In this case, electrochemically grown nickel oxyhydroxide [NiO(OH)] thin films were chosen to fabricate the sensing platform, i.e., the electrodes. Chronoamperometry was used to deposit the films on indium tin oxide (ITO) coated glass substrates. The films were thoroughly characterized to establish their structure, composition, phase purity, and electrochemical attributes. Electrochemical sensing characteristics were investigated by means of cyclic and differential pulse voltammetry, steady-state amperometry, and electrochemical impedance spectroscopy. The effects of several interfering agents like glucose, sodium chloride, methanol, hydrogen peroxide, and paracetamol were also studied on the detection attributes of dopamine. Significantly high value of sensitivity (11.87 µA µM-1 cm-2) was obtained for dopamine sensing that was associated with a limit of detection (LoD) of 0.22 µM of dopamine. However, the sensitivity (2.51 µA µM-1 cm-2) and LoD (1.20 µM) obtained for serotonin were inferior compared to those of dopamine. The performance of the electrode toward dopamine sensing was not compromised either in the presence of only serotonin or a series of other electroactive interfering agents, which makes the electrode very much dopamine selective. The dopamine response time was 200 ms, which is notably fast. Extensive studies on the effect of temperature, pH and scan rate on the detection of dopamine by the developed electrode material have also been carried out. The developed electrodes were also found to be notably stable for dopamine detection with a decay of only 6.6% in oxidation peak current density after the 50th cycle. Real-life application of the developed electrode material was checked with urine samples from adult male humans and yielded encouraging results.

Copper-doped titanium dioxide nanoparticles decorated on 2D-hexagonal boron nitride nanosheets for susceptible electrochemical detection of an anti-cancer drug in environmental and biological samples.

Chlorambucil (CML) cures chronic lymphatic leukemia (white blood cell cancer). A high dose of CML can cause several side effects like bone marrow suppression, anemia, peripheral neuropathy, and infertility in the human body. In this research, we have synthesized a nanocomposite based on copper-doped titanium dioxide (CuTiO2) adorned with 2D hexagonal boron nitride (CuTiO2@BN) for the efficient electrochemical detection of CML. A series of characterization techniques FT-IR, XRD, Raman spectroscopy, SEM, TEM, EDAX XPS, and electrochemical characterization were used to analyze the CuTiO2@BN nanocomposite structural and morphological compositions. The sensing performance of the CuTiO2@BN modified GCE for CML detection has been assessed using voltammetry methods. The chronoamperometry technique analyzed the kinetics of the electrochemical oxidation of CML at CuTiO2@BN/GCE. The CuTiO2@BN-based glassy carbon electrode (GCE) has a synergetic electro-catalytic effect on CML oxidation due to its many active sites, enhanced surface area, fast charge transfer, and numerous defects. For the detection of CML, the suggested electrochemical sensor exhibits excellent selectivity, low limit of detection (LOD) as found 5.0 nM, wide linear ranges (0.02-8000 µM), and quick reaction times.

Carrageenan derived polyelectrolyte complexes material: An effective bifunctional for electrochemical sensing of sulfamethazine and antibacterial activity.

Biopolymer-derived polyelectrolyte complexes (PECs) are a class of materials that have emerged as promising candidates for developing advanced electrochemical sensors due to their tunable properties, biocompatibility, cost-effective production, and high surface area. PECs are formed by combining positively and negatively charged polymers, resulting in a network with intriguing properties that can be tailored for specific sensing applications. The resultant PECs-based nanocomposites were used to modify the glassy carbon electrode (GCE) to detect the sulfamethazine (SFZ) antibiotic drug. In addition, electrochemical studies using electrochemical impedance spectroscopy (EIS), cyclic voltammetry (CV), and differential pulse voltammetry (DPV) are used to evaluate the SFZ detection ability. Similarly, various microscopic and spectroscopic studies investigated the nano composite's structural features and morphological behavior. The κ-CGN/P(Am-co-DMDAAc)-GO modified GCE demonstrated excellent detection ability of SFZ with the nano molar range and without interference with similar structural components. Furthermore, the newly fabricated electrode κ-CGN/P(Am-co-DMDAAc)-GO was derived from naturally available materials, water-soluble, low cost, biocompatible, exhibits good conductivity, and excellent catalytic properties. Finally, κ-CGN/P(Am-co-DMDAAc)-GO- modified GCE has versatile, practical applications for detecting SFZ in real-time samples and determining the efficacy of an antibacterial activity.

A Julolidine Coupled Azine-based Reversible Chromo-fluorogenic Probe for Specific Detection of Cu2+ Ions.

Among the various essential trace elements for living organisms, the copper (Cu2+) ions are the most important. However, Cu2+ ions are vital for the human body and are associated with necessary physiological processes; insufficient or excessiveness has many hazardous effects on our bodies. In the present contribution, strategically, we have introduced a julolidine-coupled azine-based, 9,9'-((1E,1'E)-hydrazine-1,2-diylidene bis(methanylylidene)) bis(1,2,3,5,6,7-hexahydropyrido [3,2,1-ij] quinolin-8-ol) (HDBQ) reversible chromo-fluorogenic probe for specific detection of Cu2+ ions. Probe HDBQ exhibits observable orange colorimetric change from yellow, which is visible to the naked eye in daylight. The highly green fluorescence HDBQ becomes a non-fluorescent one with the incorporation of Cu2+ ions. Interestingly, the colorimetric change and non-fluorescent HDBQ-Cu2+ complex reverse to the original HDBQ in the presence of ethylenediamine tetraacetic acid (EDTA). The detection and quantification limit of HDBQ towards the detection of Cu2+ ions is found to be in the µM range, which is much lower than the limit (31.5 µM) recommended by WHO. We have also performed a colorimetric and fluorometric paper-based test strips-based experiment employing HDBQ for real-time on-site detection of Cu2+ ions. Using the reversibility characteristics of HDBQ for the consecutive addition of Cu2+ and EDTA, we have established the INHIBIT molecular logic gate. The present report brings a precise and sensitive probe for the detection of Cu2+ ions in real environmental and biological samples.

Dual-channel versatile molecular sensing platform for individual and successive HClO and H2S detection: Applicable in toxic alerts of environmental samples and living organisms.

In this study, we have successfully developed a novel dual-response fluorescent probe, NACou, designed for the visual and quantitative detection of HClO/H2S in real water samples and liquid beverages by a thin-film sensing platform. Additionally, NACou demonstrated efficacy for sensing HClO/H2S in HeLa cells, plants and zebrafish through distinct fluorescent channels, yielding satisfactory results. NACou exhibited a multi-modal fluorescence response mechanism for detecting HClO and H2S with remarkable low detection limits of 27.8 nM and 34.4 nM, accompanied by outstanding fluorescent enhancement (209-fold and 148-fold, respectively). These advantages position NACou as a potent molecular tool for HClO and H2S sensing. The specific recognition performance of NACou towards HClO/H2S were confirmed through fluorescence spectroscopy, mass analysis and UV-vis spectroscopy. Importantly, the thin-film sensing platform with the visible fluorescence change can enable rapid assays for water quality and food safety monitoring, showcasing significant practical application value. Impressively, NACou has been employed in warning against liver injury induced by multiple drugs, allowing for the exploration of the pathogenesis and degree of drug-induced injury.

Hexagonally close-packed three-dimensional nano-flower entrapped on a heteroatom doped carbon sheets: A sensitive electro-catalyst to determine sulfonamide in environmental samples.

Sulfamethazine (SMZ) is one of the antibiotics frequently found with low concentrations in water bodies including drinking water sources and foodstuffs contamination, which affects the environmental ecosystem and humans. Therefore, the detection of SMZ is necessary to protect the biosphere. This work provides an investigation of the SMZ oxidation process using the electrochemical method by hydrothermally synthesized Barium doped Zinc oxide (BZO) with nitrogen and boron-doped reduced graphene oxide (NBRGO). The BZO/NBRGO composite was characterized using FESEM, EDAX, HR-TEM, Raman-spectroscopy, XRD, and XPS. Further, an electrochemical investigation has also made use of EIS, CV, and DPV. The limit of detection (LOD) of the SMZ has been found 0.003 µM with high sensitivity of 12.804 µA µM-1 cm-2 and a linear range (0.01-711 µM). Additionally, the repeatability, reproducibility, and stability of the BZO/NBRGO electrode have an excellent outcome compared with other electrodes. These prepared BZO/NBRGO electrodes have been used for the determination of SMZ in milk and water sample with acceptable recoveries.

Nano solid phase micro membrane tip and electrochemical methods for vanillin analysis in chocolate samples.

A polymer-based nanosensor and electrochemical methods were developed for the quantitative analysis of vanillin. The sample preparation was done using nano solid phase micro membrane tip extraction (NSPMMTE). A novel poly(phenylalanine)/TiO2/CPE sensor was built as the working electrode for the first time for the analysis of the vanillin substance. The electrochemical behavior and analytical performance of vanillin were examined in detail by cyclic voltammetry (CV) and differential pulse stripping voltammetry (DPSV) techniques via the oxidation process. The optimized modules of the DPSV technique that affected the vanillin peak current and peak potential were pH, pulse amplitude, step potential, and deposition time. The electroactive surface areas of bare CPE, TiO2/CPE, and poly(phenylalanine)/TiO2/CPE electrodes were found to be 0.135 cm2, 0.155 cm2, and 0.221 cm2, respectively. The limit of detection (LOD) was 32.6 µg/L in the 0.25-15.0 mg/L working range at pH 7.0. The selectivity of the proposed DPSV method for the determination of vanillin on the modified electrode was investigated in the presence of various organic and inorganic substances, and the determination of vanillin with high recovery was achieved with less than 5% relative error. The analytical application was applied in chocolate samples and the DPSV method was found highly efficient, reproducible, and selective.

Fabrication of Carbon Nanofiber Incorporated with CuWO4 for Sensitive Electrochemical Detection of 4-Nitrotoluene in Water Samples.

In the current work, copper tungsten oxide (CuWO4) nanoparticles are incorporated with carbon nanofiber (CNF) to form CNF/CuWO4 nanocomposite through a facile hydrothermal method. The prepared CNF/CuWO4 composite was applied to the electrochemical detection of hazardous organic pollutants of 4-nitrotoluene (4-NT). The well-defined CNF/CuWO4 nanocomposite is used as a modifier of glassy carbon electrode (GCE) to form CuWO4/CNF/GCE electrode for the detection of 4-NT. The physicochemical properties of CNF, CuWO4, and CNF/CuWO4 nanocomposite were examined by various characterization techniques, such as X-ray diffraction studies, field emission scanning electron microscopy, EDX-energy dispersive X-ray microanalysis, and high-resolution transmission electron microscopy. The electrochemical detection of 4-NT was evaluated using cyclic voltammetry (CV) the differential pulse voltammetry detection technique (DPV). The aforementioned CNF, CuWO4, and CNF/CuWO4 materials have better crystallinity with porous nature. The prepared CNF/CuWO4 nanocomposite has better electrocatalytic ability compared to other materials such as CNF, and CuWO4. The CuWO4/CNF/GCE electrode exhibited remarkable sensitivity of 7.258 µA µM-1 cm-2, a low limit of detection of 86.16 nM, and a long linear range of 0.2-100 µM. The CuWO4/CNF/GCE electrode exhibited distinguished selectivity, acceptable stability of about 90%, and well reproducibility. Meanwhile, the GCE/CNF/CuWO4 electrode has been applied to real sample analysis with better recovery results of 91.51 to 97.10%.

One Pot Hydrothermal Synthesis and Application of Bright-yellow-emissive Carbon Quantum Dots in Hg2+ Detection.

Carbon quantum dots (CQD) have drawn great interest worldwide for their extensive application as sensors due to their extraordinary physical and chemical characteristics, good biocompatibility, and high fluorescence in nature. Here, we demonstrate a technique for detecting mercury (Hg2+) ion using a fluorescent CQD probe. Ecology is concerned about the accumulation of heavy metal ions in water samples due to their harmful effects on human health. Sensitive identification and removal of metal ions from water samples are required to reduce heavy metals' risk. To find out Mercury in the water sample, carbon quantum dots were used and synthesized by 5-dimethyl amino methyl furfuryl alcohol and o-phenylene diamine through the hydrothermal technique. The synthesized CQD shows yellow emission when exposed to UV irradiation. Mercury ion was used to quench carbon quantum dots, and it was found that the detection limit was 5.2 nM with a linear range of 15-100 µM. The synthesized carbon quantum dots were demonstrated to efficiently detect Mercury ions in real water samples.

Direct decoration of commercial cotton fabrics by binary nickel-cobalt metal-organic frameworks for flexible glucose sensing in next-generation wearable sensors.

Having a prime significance in diagonsing and predicting the dangerous symptoms of chronic diseases in the early stages, special attention has been drawn by wearable glucose-sensing platforms in recent years. Herein, modified commercial cotton fabrics, decorated with binary Ni-Co metal-organic frameworks (NC-MOFs) through a one-pot scalable hydrothermal route, were directly utilized as flexible electrodes for non-enzymatic glucose amperometric sensing. Glucose sensitivities of 105.2 µA mM-1 cm-2 and 23 µA mM-1 cm-2 were acheived within two distinct linear dynamic ranges of 0.04-3.13 mM and 3.63-8.28 mM, respectively. Receiving benefits from a remarkable glucose sensitivity behavior in co-existence of iso-structures and interferences, rapid response (4.2 s), and remarkable reproducibility and repeatability, NC-MOF-modified cotton fabric electrodes are imensilly promising for developing high-performance wearable glucose sensing platfroms. The sensing performance of fabricated electrodes was further investigated in human blood serum and saliva.

Two dimensional architectures of graphitic carbon nitride with the substitution of heteroatoms for bifunctional electrochemical detection of nilutamide.

The exploration of graphitic carbon nitride (g-C3N4), a two-dimensional (2D) metal-free polymer semiconducting material, is largely discussed due to its large specific surface area, high electrical conductivity, thermal stability, and adaptable electronic structure. The adaption of sulfur (S) and phosphorous (P) atoms into the layers of g-C3N4 increases the electrochemical performance of detecting nilutamide (NT). The aggregation severity can be decreased by integrating S/P into g-C3N4, thereby improving surface area and electrical conductance. The g-C3N4, S/gC3N4, P/g-C3N4, and S/P/g-C3N4 were studied with X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), Field emission scanning electron microscopy (FESEM), Transmission electron microscopy (TEM), Fourier transform infrared (FTIR), Ultraviolet visible spectroscopy (UV), Thermogravimetric analysis (TGA), and Brunauer-Emmett-Teller (BET). The well-assigned S/P/g-C3N4 exhibited a good crystalline structure with more active sites for improved electron transfer toward NT detection. Both differential pulse voltammetry (DPV) and amperometry (IT) was studied for NT detection. The electrochemical studies were done with a linear range of 0.019-1.17 µM to 5.36-1891.98 µM in DPV and 0.01 µM-158.3 µM in IT technique. The attained limit of detection in DPV analysis was 3.2 nM and with IT analysis 2.4 nM. The nanocomposite S/P/g-C3N4 shows good selectivity towards NT. The fabricated electrode showed excellent repeatability, reproducibility, and stability, with a significant recovery range in real sample analysis.

Effect of bismuth doping on zircon-type gadolinium vanadate: Effective electrocatalyst for determination of hazardous herbicide mesotrione.

Pesticides are used to promote the growth of plants and crops by killing weeds and other pests. On the other hand, overused and unused pesticides can leach into groundwater and agricultural lands, easily contaminating water, air, and soil resources. Doping with metal ions is an effective method to improve the catalytic activity of potential electrode materials. In the present study, an electrochemical sensor based on Bi3+-doped gadolinium vanadate nanoparticles (GVB NPs) was fabricated for sensitive and selective detection of harmful pesticide mesotrione (MST). The crystalline nature, functional groups, and elemental composition of the prepared electrocatalysts were confirmed by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), X-ray photoelectron spectroscopy (XPS) and Raman spectroscopy. Field-emission scanning electron microscopy (SEM) and high-resolution transmission electron microscopy (HR-TEM) showed that the undoped gadolinium vanadate had a rice-like nanostructure and was designated as GV NRs, while GVB had the morphology of nanoparticles. The fabricated electrode exhibited a well-resolved MST reduction peak in cyclic voltammetry and linear sweep voltammetry (LSV). Bismuth doping effectively enhanced the MST reduction and produced a stronger cathodic current response than bare and GV NRs-modified GCE. Moreover, GVB NPs/GCE show a nanomolar detection limit of 45 nM with a sensitivity of 0.43 µA µM-1 cm-2. The proposed sensor showed good repeatability, reproducibility, and stability in LSV analysis. The fabricated MST sensor was successfully applied to the analysis of real samples (river water and corn) with good recovery results.

Paper-Based Screen-Printed Ionic-Liquid/Graphene Electrode Integrated with Prussian Blue/MXene Nanocomposites Enabled Electrochemical Detection for Glucose Sensing.

As glucose biosensors play an important role in glycemic control, which can prevent the diabetic complications, the development of a glucose sensing platform is still in needed. Herein, the first proposal on the in-house fabricated paper-based screen-printed ionic liquid/graphene electrode (SPIL-GE) modified with MXene (Ti3C2Tx), prussian blue (PB), glucose oxidase (GOx), and Nafion is reported. The concentration of PB/Ti3C2Tx was optimized and the optimal detection potential of PB/Ti3C2Tx/GOx/Nafion/SPIL-GE is -0.05 V. The performance of PB/Ti3C2Tx/GOx/Nafion modified SPIL-GE was characterized by cyclic voltammetry and chronoamperometry technique. This paper-based platform integrated with nanomaterial composites were realized for glucose in the range of 0.0-15.0 mM with the correlation coefficient R2 = 0.9937. The limit of detection method and limit of quantification were 24.5 µM and 81.7 µM, respectively. In the method comparison, this PB/Ti3C2Tx/GOx/Nafion/SPIL-GE exhibits a good correlation with the reference hexokinase method. This novel glucose sensing platform can potentially be used for the good practice to enhance the sensitivity and open the opportunity to develop paper-based electroanalytical devices.