Impact of Plant Oil Supplementation on Lipid Production and Fatty Acid Composition in Cunninghamella elegans TISTR 3370.

The Cunninghamella genus has been utilized for the production of PUFA-rich lipids. Therefore, we investigate the impact of plant oil supplementation in the culture medium (soybean oil, rice bran oil, and perilla oil), selected based on their different fatty acid predominant, on lipid production and fatty acid composition in C. elegans (TISTR 3370). All oils significantly boosted fungal growth, each influencing distinct patterns of lipid accumulation within the cells. The cells exhibited distinct patterns of lipid accumulation, forming intracellular lipid bodies, influenced by the different oils. Monounsaturated fatty acids (MUFAs) were found to be the most abundant, followed by polyunsaturated fatty acids (PUFAs) and saturated fatty acids (SFAs) in the fungal lipid cultures. Oleic acid was identified as the primary MUFA, while palmitic acid was the predominant SFA in perilla oil supplements. Remarkably, perilla oil supplement provided the highest total lipid production with arachidonic acid being exclusively detected. The percentage of PUFAs ranged from 12% in the control to 33% in soybean oil, 32% in rice bran oil, and 61% in perilla oil supplements. These findings offer valuable opportunities for advancing biotechnological applications in lipid production and customization, with implications for food and nutrition as well as pharmaceuticals and cosmetics.

Effect of Soybean Oil on the Improvement of the Functionality of Edible Membrane-Type Food Packaging Films Based on Caseinate-Carboxymethyl Chitosan Compositions.

Edible film biopolymers are gaining attention to tackle problems of plastic waste and food safety to alleviate environmental problems associated with plastic products in food packaging. In this study, caseinate-carboxymethyl chitosan (CA-CMCH) composite films were made with the incorporation of soybean oil (SO) using a casting technique. The influence of different soybean oil concentrations at 0, 0.5, and 1% (w/w) on physical, mechanical, barrier, and surface characteristics of films composed of caseinate-carboxymethyl chitosan (CA-CMCH) was evaluated. The brightest film (L* value of 95.95 ± 0.30) was obtained with the edible film made from the control group of samples with sodium caseinate (NaCA-100; 100% NaCA). The results also indicated that samples with 1% SO in NaCA-75 and CaCA-75 had lower water vapor permeability (WVP), while those with NaCA-50 and CaCA-50 showed higher values of WVP. For mechanical properties, this study found that incorporating soybean oil into the caseinate-carboxymethyl (CA-CMCH) composite films led to an enhancement of both tensile strength and elongation at break. The morphological structures, determined using SEM, of control and composite films showed compact and homogenous surfaces. Overall, the addition of soybean oil contributed to the improvement of the functional properties of the edible films, offering potential solutions to the environmental issues associated with plastic packaging and enhancing the safety and performance of food packaging.

Fully Bio-Based Polymer Composites: Preparation, Characterization, and LCD 3D Printing.

The present work aimed to prepare novel bio-based composites by adding fillers coming from agro-wastes to an acrylate epoxidized soybean oil (AESO) resin, using liquid crystal display (LCD) 3D printing. Different photocurable formulations were prepared by varying the reactive diluents, iso-bornyl methacrylate (IBOMA) and tetrahydrofurfuryl acrylate (THFA). Then, two fillers derived from different industrial wastes, corn (GTF) and wine (WPL-CF) by-products, were added to the AESO-based formulations to develop polymer composites with improved properties. The printability by LCD of the photocurable formulations was widely studied. Bio-based objects with different geometries were realized, showing printing accuracy, layer adhesion, and accurate details. The thermo-mechanical and mechanical properties of the 3D-printed composites were tested by TGA, DMA, and tensile tests. The results revealed that the agro-wastes' addition led to a remarkable increase in the elastic modulus, tensile strength, and glass transition temperature in the glassy state for the systems containing IBOMA and for flexible structures in the rubbery region for systems containing THFA. AESO-based polymers demonstrated tunable properties, varying from rigid to flexible, in the presence of different diluents and biofillers. This finding paves the way for the use of this kind of composite in applications, such as biomedical for the realization of prostheses.

Effect of deodorization conditions on fatty acid profile, oxidation products, and lipid-derived free radicals of soybean oil.

Oxidative stability is a key quality characteristic of edible oils, and the oil's antioxidant capacity decreases during the deodorization stage. This study explores the changes in radical formation, molecular structure, oxidative characteristics, fatty acids, and main bioactive compounds in soybean oil during deodorization. The lag phase decreased, whereas the total amount of spins of free radicals increased as the deodorization time increased from 90 to 150 min. The total amount of spins and percentage of alkyl radicals varied dramatically under different times and temperatures (220 âˆ¼ 260 ℃). Results showed that identifying and quantifying the formed radicals can provide useful information for monitoring and controlling oil oxidation in vegetable oil refining systems. Therefore, to control early oxidation events, maximize refined oil product yield, and reduce energy consumption in the refining plant, the priority should be to minimize temperature during the oil refining process and then shorten the deodorization time.

Berberis integerrima bioactive molecules loaded in chitosan-based electrospun nanofibers for soybean oil oxidative protection.

Natural bioactive molecules such as phenolic acids and alkaloids play a crucial role in preserving the quality and safety of food products, particularly oils, by preventing oxidation. Berberis integerrima, a rich source of such antioxidants, has been explored in this study for its potential application in soybean oil preservation. Electrospun nanofibers, composed of polyvinyl alcohol and chitosan, were fabricated and loaded with an alcoholic extract of Berberis integerrima. The antioxidant activity of Berberis integerrima was evaluated, and the phenolic compounds contributing to its efficacy were identified and quantified. The physicochemical properties of the polyvinyl alcohol /chitosan/Berberis integerrima nanofibers, including morphology, crystallinity, functional groups, and thermal stability, were characterized. The results revealed that the polyvinyl alcohol/chitosan/Berberis integerrima nanofibers exhibited high antioxidant capacity and improved the stability of Berberis integerrima, indicating their potential as effective and biodegradable materials for food preservation. This study underscores the potential of harnessing natural antioxidants from Berberis integerrima in nanofibers to enhance the quality and safety of soybean oil.

Advanced ethylene-absorbing and cushioning depending on the 3D porous-structured fruit packaging: Toward polyurethane foam manipulation using zein and soybean oil polyol substrates.

Fruits are essential sources of nutrients in our daily diet; however, their spoilage is often intensified by mechanical damage and the ethylene phytohormone, resulting in significant economic losses and exacerbating hunger issues. To address these challenges, this study presented a straightforward in situ synthesis protocol for producing Z/SOPPU foam, a 3D porous-structured fruit packaging. This innovative packaging material offered advanced ethylene-adsorbing and cushioning capabilities achieved through stirring, heating, and standing treatments. The results demonstrated that the Z/SOPPU foam, with its porous structure, served as an excellent packaging material for fruits, maintaining the intact appearance of tomatoes even after being thrown 72 times from a height of 1.5 m. Additionally, it exhibited desirable hydrophobicity (contact angle of 114.31 ± 0.82°), degradability (2.73 ± 0.88 % per 4 weeks), and efficient ethylene adsorption (adsorption rate of 13.2 ± 1.7 mg/m3/h). These remarkable characteristics could be attributed to the unique 3D micron-porous configuration, consisting of soybean oil polyol polyurethane foam for mechanical strain cushioning and zein for enhanced ethylene adsorption efficiency. Overall, this research offers an effective and original approach to the rational design and fabrication of advanced bio-based fruit packaging.

Comparison of two formulations of intravenous lipid emulsions in pediatric intestinal failure.

PURPOSE: The effect of different types of lipid emulsion may guide therapy of patients with intestinal failure (IF) to limit morbidity such as intestinal failure-associated liver disease (IFALD). METHODS: A retrospective chart review of pediatric patients with IF who received soybean oil lipid emulsion (SL) or mixed oil lipid emulsion (ML) was performed. Data over 1 year were collected. RESULTS: Forty-five patients received SL and 34 received ML. There were no differences in the incidence (82 versus 74%, P = 0.35) or resolution (86 versus 92%, P = 0.5) of IFALD between the cohorts. The median dose of ML was higher compared to SL (2 versus 1 g/kg/day, P < 0.001). If resolved, IFALD resolved rapidly in the ML cohort compared to the SL cohort (67 versus 37 days, P = 0.01). Weight gain was higher in the ML compared to the SL cohort at resolution of IFALD or 1 year from diagnosis of IF (P = 0.009). CONCLUSION: The administration of ML did not alter the incidence or resolution of IFALD compared to SL in pediatric IF. There was rapid resolution of IFALD and enhanced weight gain in the ML cohort compared to SL in pediatric IF.

Preparation and characterisation of kaempferol composite carrier solid dispersion: evaluation of its application in preventing soybean oil spoilage.

Kaempferol (KPF) can be used as a natural antioxidant and food additive in food processing. However, the poor solubility of KPF limited its bioavailability and application. In order to improve the solubility of KPF, kaempferol composite carrier solid dispersion (KPF-CC-SD) was prepared and the process was optimised. When the ratio of KPF: CA (citric acid): Soluplus reached 1:4:6, the dissolution rate was the highest, and the sample was stable over 12 weeks. The characterisation results indicated that KPF-CC-SD exists in an amorphous form. Peroxidation value and acid value of soybean oil showed that the preservation effect of KPF-CC-SD was better than that of KPF, and the inhibition effect of KPF-CC-SD on acid value was better than that of butylated hydroxytoluene. In conclusion, KPF-CC-SD can change the solubility, crystal form and spatial stability of KPF through the carrier, which has a great application prospect in the field of food preservation.

Synthesis of surface-modified porous polysulfides from soybean oil by inverse vulcanization and its sorption behavior for Pb(II), Cu(II), and Cr(III).

Guided by efficient utilization of natural plant oil and sulfur as low-cost sorbents, it is desired to tailor the porosity and composition of polysulfides to achieve their optimal applications in the management of aquatic heavy metal pollution. In this study, polysulfides derived from soybean oil and sulfur (PSSs) with improved porosity (10.2-22.9 m2/g) and surface oxygen content (3.1-7.0 wt.%) were prepared with respect to reaction time of 60 min, reaction temperature of 170 °C, and mass ratios of sulfur/soybean oil/NaCl/sodium citrate of 1:1:3:2. The sorption behaviors of PSSs under various hydrochemical conditions such as contact time, pH, ionic strength, coexisting cations and anions, temperature were systematically investigated. PSSs presented a fast sorption kinetic (5.0 h) and obviously improved maximum sorption capacities for Pb(II) (180.5 mg/g), Cu(II) (49.4 mg/g), and Cr(III) (37.0 mg/g) at pH 5.0 and T 298 K, in comparison with polymers made without NaCl/sodium citrate. This study provided a valuable reference for the facile preparation of functional polysulfides as well as a meaningful option for the removal of aquatic heavy metals.

Corn oil and Soybean oil effect as vehicles on behavioral and oxidative stress profiles in developmentally exposed offspring mice.

Corn and soybean oils are among the most frequently used vehicles for water-insoluble compounds in toxicological studies. These two vegetable oils are nutrients and may induce some biological effects on animals that might interfere with the experimental results. However, their chronic effects on a developing brain have not been reported. This study aims to evaluate the neurobehavioral and brain biochemical effects of both oils on male and female Swiss albino mice. Pregnant female mice were exposed to 1 µl/g/d of either tap water, corn oil (CO), or soybean oil (SO) from early gestation (GD1) until weaning then offspring mice were exposed to the same treatment regimen until adulthood (PND70). Our results showed that developmental exposure to both oils induced body weight changes in offspring mice. In addition, we detected some behavioral abnormalities where both oil-treated groups showed a significant decrease in locomotor activity and greater levels of anxiety behavior. Moreover, our results suggest that continuous exposure to these oils may alter motor coordination, spatial memory and induce depression-like behavior in adult mice. These alterations were accompanied by increased malondialdehyde, superoxide dismutase, and glutathione peroxidase activities in specific brain regions. Together, these data suggest that exposure to CO and SO as vehicles in developmental studies may interfere with the behavioral response and brain redox homeostasis in offspring mice.

The impacts of dietary inclusion of soybean oil and linseed oil on growth performance, carcass yield, and health status of growing Japanese quail.

Polyunsaturated fatty acids (PUFA), including n-6 and n-3 fatty acids, are essential for enhancing the performance and health of poultry. Avian species lack desaturase enzymes for endogenous synthesis of n-6 and n-3 fatty acids. This work aimed to determine the impacts of including soybean oil (SO) and linseed oil (LO) in quail diets on growth, lipid profile, hepatic and renal functions, immunity, and antioxidant status. A total of 350 Japanese quail chicks (1-wk-old) were randomly arranged into 7 dietary treatment groups. Seven isocaloric and isonitrogenous experimental basal diets were formed based on the nutritional requirements of growing Japanese quail. Group 1, the control, received a basal with no oils, while groups 2 to 7 received a basal diet containing either 1% SO, 1.5% SO, 2% SO, 1% LO, 1.5% LO, or 2% LO, respectively. Quail groups that consumed diets containing LO at all levels showed significantly greater live body weight (LBW) at 5th wk of age than other experimental groups. The dietary incorporation of 1.5 or 2% SO or LO at all levels yielded significant improvements in body weight gain (BWG) and feed conversion ratio (FCR) through 3 to 5 and 1 to 5 wk of age. Different dietary oil sources and levels have no significant impacts on feed intake (FI) and carcass yield parameters. Lipid profile parameters were improved by adding SO and LO in quail diets, with LO having a higher effect than SO. The hepatic and renal functionality were improved by adding SO and LO in quail diets. The lowest uric acid (UA) bloodstream concentrations were recorded in the quail group fed a diet with 2% LO. Values of Gamma globulins (G-GLO) and immunoglobulins (G, M, and A) were increased by adding SO or LO to quail diets. Blood levels of MDA and TAC were improved significantly by including LO in quail diets. The activity of the superoxide dismutase (SOD) enzyme was significantly increased by adding SO or LO to quail diets. Generally, adding SO or LO to growing quail diets up to 2% could yield favorable effects on growth performance, blood lipids, hepatic and renal functions, immunity, and antioxidant status; however, LO seems to have better effects than SO.

Preparation of Non-Isocyanate Polyurethanes from Mixed Cyclic-Carbonated Compounds: Soybean Oil and CO2-Based Poly(ether carbonate).

This study presents the synthesis and characterization of non-isocyanate polyurethanes (NIPU) derived from the copolymerization of cyclic-carbonated soybean oil (CSBO) and cyclic carbonate (CC)-terminated poly(ether carbonate) (RCC). Using a double-metal cyanide catalyst, poly(ether carbonate) polyol was first synthesized through the copolymerization of carbon dioxide and propylene oxide. The terminal hydroxyl group was then subjected to a substitution reaction with a five-membered CC group using glycerol-1,2-carbonate and oxalyl chloride, yielding RCC. Attempts to prepare NIPU solely using RCC and diamine were unsuccessful, possibly due to the low CC functionality and the aminolysis of RCC's linear carbonate repeating units. However, when combined with CSBO, solid NIPUs were successfully obtained, exhibiting good thermal stability along with enhanced mechanical properties compared to conventional CSBO-based NIPU formulations. Overall, this study underscores the potential of leveraging renewable resources and carbon capture technologies to develop sustainable NIPUs with tailored properties, thereby expanding their range of applications.

Sterically Hindered Oleogel-Based Underwater Adhesive Enabled by Mesh-Tailoring Strategy.

Underwater adhesives hold significant relevance in daily life and numerous industrial applications. Despite considerable efforts, developing scalable, high-performance underwater adhesives through a simple and effective method remains a formidable challenge. This study presents a novel mesh-tailoring strategy for in situ, rapid, and ultrastrong oleogel-based underwater adhesives (OUA), which comprises a highly crosslinked polyurethane network with a matching mesh size (≈2.22 nm) that precisely entraps bio-based epoxidized soybean oil (ESO) molecules (≈2.31 nm) by steric hindrance effect. This oleogel exhibits unprecedented robust mechanical properties (≈35 MPa) and maintains stability under extreme conditions, including high temperatures (100 °C), high pressures (30 MPa), and immersion in various solvents (water, ethanol, or ESO). In particular, this oleogel displays high hydrophobicity, rapid curing, and strong interface affinity, resulting in ultrahigh underwater adhesion strength (up to 2.13 MPa) and exceptional substrate universality. Moreover, the remarkable environmental adaptability and stability of OUA enable its use in harsh aqueous environments, including acidic/alkaline, saline, and extreme temperature solutions. The comprehensive capabilities of the OUA underscore its potential for building underwater structures, repairing leaky containers, and sealing broken submarine pipelines. This research establishes the foundation for the designing of next-generation underwater adhesives and offers fresh perspectives for exploring oleogel-based materials.

Development of lactic acid based chain extender and soybean oil-derived polyurethanes for ecofriendly sustained drug delivery systems.

In the present study, a range of sustainable, biocompatible and biodegradable polyurethanes (PU-1 to PU-4) were synthesized using different combinations of biobased polyol (obtained through the epoxidation of soybean oil, followed by ring opening with ethanol) and polyethylene glycol (PEG) and isophorone diisocyanate. The sustainable chain extender used in this study was synthesized by the esterification of lactic acid with ethylene glycol (EG). The synthesized PU samples were characterized through scanning electron microscopy (SEM), Fourier transformed infrared (FTIR) and nuclear magnetic resonance (1H NMR and 13C NMR) spectroscopy. Wetting ability and thermal degradation analysis (TGA) of the samples were also studied. Subsequently, these PUs were examined as potential drug delivery systems using Gabapentin as a model drug, which was loaded in the polymer matrix using the solvent evaporation method. The drug release studies were carried out in 0.06 N HCl as a release medium according to the method outlined in the United States Pharmacopeia. The maximum drug release was observed for sample PU-P1, which was found to be 53.0 % after 6 h. Moreover, a comparison of different PU samples revealed a trend wherein the values of drug release were decreased with an increase in the PEG content.

Effect of soybean polysaccharide and soybean oil on gelatinization and retrogradation properties of corn starch.

This investigation stems from the wide interest in mitigating starch retrogradation, which profoundly impacts the quality of starch-based food, garnering significant attention in the contemporary food industry. Our study delves into the intricate dynamics of soluble soybean polysaccharide (SSPS) and soybean oil (SO) when added individually or in combination to native corn starch (NCS), offering insights into the gelatinization and retrogradation phenomena. We observed that SSPS (0.5 %, w/w) hindered starch swelling, leading to an elevated gelatinization enthalpy change (∆H) value, while SO (0.5 %, w/w) increased ∆H due to its hydrophobicity. Adding SSPS and/or SO concurrently reduced the viscosity and storage modulus (G') of starch matrix. For the starch gel (8 %, w/v) after refrigeration, SSPS magnified water-holding capacity (WHC) and decreased hardness through hydrogen bonding with starch, while SO increased hardness with limited water retention. Crucially, the combination of SSPS and SO maximized WHC, minimized hardness, and significantly inhibited starch retrogradation. The specific ratio of SSPS to SO was found to significantly influence the starch properties, with a 1:1 ratio resulting in the most desirable quality for application in starch-based foods. This study offers insights for utilizing polysaccharides and lipids in starch-based food products to extend shelf life.

Exploring the characteristics of Burkholderia gladioli pathovar cocovenenans: Growth, bongkrekic acid production, and potential risks of food contamination in wet rice noodles and vermicelli.

This research investigated the presence of Burkholderia gladioli pathovar cocovenenans (BGC) in wet rice and starch products, Tremella, and Auricularia auricula in Guangzhou, China. It examined BGC growth and bongkrekic acid (BA) production in wet rice noodles and vermicelli with varying rice flour, edible starch ratios, and oil concentrations. A qualitative analysis of 482 samples revealed a detection rate of 0.62%, with three positive for BGC. Rice flour-based wet rice noodles had BA concentrations of 13.67 ± 0.64 mg/kg, 2.92 times higher than 100% corn starch samples (4.68 ± 0.54 mg/kg). Wet rice noodles with 4% soybean oil had a BA concentration of 31.72 ± 9.41 mg/kg, 5.74 times higher than those without soybean oil (5.53 ± 1.23 mg/kg). The BA concentration correlated positively (r = 0.707, P < 0.05) with BGC contamination levels. Low temperatures (4 °C and -18 °C) inhibited BGC growth and BA production, while higher storage temperatures (26 °C and 32 °C) promoted BGC proliferation and increased BA production. Reducing edible oil use and increasing edible starch can mitigate the risk of BGC-related food poisoning in wet rice noodles and vermicelli production. Further research is needed to find alternative oils that do not enhance BA production. Strengthening prevention and control measures is crucial across the entire production chain to address BGC contamination and BA production.

Dietary supplementation of phytoncide and soybean oil increases milk conjugated linoleic acid and depresses methane emissions in Holstein dairy cows.

The objective of this study was to determine whether adding phytoncide oil (PO) and soybean oil (SBO) to the dairy cow diet could increase milk conjugated linoleic acid (CLA) and depress methane (CH4) emissions in Holstein dairy cows. Rumen fermentation was conducted at four levels of SBO (0, 1, 2, and 4%, on DM basis) and two levels of PO (0 and 0.1%, on DM basis) with in vitro experiment. To evaluate blood parameters, fecal microbe population, milk yield and fatty acid compositions, and CH4 production, in vivo experiment was conducted using 38 Holstein dairy cows divided into two groups of control (fed TMR) and treatment (fed TMR with 0.1% PO and 2% SBO as DM basis). In the in vitro study (Experiment 1), PO or SBO did not affect rumen pH. However, SBO tended to decrease ruminal ammonia-N (p = 0.099). Additionally, PO or SBO significantly decreased total gas production (p = 0.041 and p = 0.034, respectively). Both PO and SBO significantly decreased CH4 production (p < 0.05). In addition, PO significantly increased both CLA isomers (c9, t11 and t10, c12 CLA) (p < 0.001). Collectively, 0.1% PO and 2% SBO were selected resulting in most effectively improved CLA and decreased CH4 production. In the in vivo study (Experiment 2), 0.1% PO with 2% SBO (PSO) did not affect complete blood count. However, it decreased blood urea nitrogen and magnesium levels in blood (p = 0.021 and p = 0.01, respectively). PSO treatment decreased pathogenic microbes (p < 0.05). It increased milk yield (p = 0.017) but decreased percentage of milk fat (p = 0.013) and MUN level (p < 0.01). In addition, PSO treatment increased both the concentration of CLA and PUFA in milk fat (p < 0.01). Finally, it decreased CH4 emissions from dairy cows. These results provide compelling evidence that a diet supplemented with PSO can simultaneously increase CLA concentration and decrease CH4 production with no influence on the amount of milk fat (kg/day) in Holstein dairy cows.

Sustainable Asphalt Mixtures with Enhanced Water Resistance for Flood-Prone Regions Using Recycled LDPE and Carnauba-Soybean Oil Additive.

This manuscript presents a comprehensive study on the sustainable optimization of asphalt mixtures tailored for regions prone to flooding. The research addresses the challenges associated with water damage to asphalt pavements by incorporating innovative additives. The study centers on incorporating recycled Low-Density Polyethylene (LDPE) and a tailored Carnauba-Soybean Oil Additive, advancing asphalt mixtures with a Control mix, LDPE (5%) + Control, and LDPE (5%) + 3% Oil + Control. A critical aspect of the research involves subjecting these mixtures to 30 wetting and drying cycles, simulating the conditions prevalent in tropical flood-prone areas. The incorporation of innovative additives in asphalt mixtures has demonstrated significant improvements across various performance parameters. Tensile Strength Ratio (TSR) tests revealed enhanced tensile strength, with the LDPE (5%) + 3% Oil-modified mixture exhibiting an impressive TSR of 85.7%. Dynamic Modulus tests highlighted improved rutting resistance, showcasing a remarkable increase to 214 MPa in the LDPE (5%) with a 3% Oil-modified mixture. The Semi-Circular Bending (SCB) test demonstrated increased fracture resistance and energy absorption, particularly in the LDPE (5%) with 3% Oil-modified mixture. Hamburg Wheel-Tracking (HWT) tests indicated enhanced moisture resistance and superior rutting resistance at 20,000 cycles for the same mixture. Cantabro tests underscored improved aggregate shatter resistance, with the LDPE (5%) + 3% Oil-modified mixture exhibiting the lowest weight loss rate at 9.820%. Field tests provided real-world insights, with the LDPE (5%) + 3% Oil mixture displaying superior stability, a 61% reduction in deflection, and a 256% improvement in surface modulus over the control mixture. This research lays the groundwork for advancing the development of sustainable, high-performance road pavement materials, marking a significant stride towards resilient infrastructure in flood-prone areas.

Rubber Compounds from Devulcanized Ground Tire Rubber: Recipe Formulation and Characterization.

In this study, our focus was on developing and investigating rubber recipes that are suitable for devulcanized ground tire rubber (dGTR). Devulcanized rubber has a powdery or sticky uncured rubber-like appearance depending on the extent of main-chain degradation that occurs with selective crosslinking scission. Still, it has a significantly shorter scorch time than a new rubber compound. Therefore, our primary goal was to slow down the vulcanization process of dGTR and improve its mechanical properties via recipe development. We formulated several recipes (sulfur-, peroxide-, and phenolic resin-based) and studied the vulcanization process and the main properties of the revulcanized rubber sheets. We observed that the vulcanization process could be altered with different vulcanization methods: using peroxide and vulcanizing resin extended the process significantly. Peroxide vulcanization also provided enhanced elongation compared to sulfuric systems. With a balance of properties in mind, we selected a semi-efficient sulfur-based recipe and studied the characteristics of natural rubber/dGTR mixtures with the help of plasticizer oils. We successfully replaced a notable portion of natural rubber with dGTR, maintaining its properties without much compromise.

Dietary Resveratrol Ameliorates Hepatic Fatty Acid Metabolism and Jejunal Barrier in Offspring Induced by Maternal Oxidized Soybean Oil Challenge.

Increasing evidence indicates that maternal exposure to oxidized soybean oil (OSO) causes damage to the mother and offspring. The antioxidant resveratrol (Res) has a variety of health benefits. However, the protective effect of Res on mitigating offspring damage after maternal exposure to OSO and its mechanism remains unclear. Therefore, this study aimed to investigate the effect of Res on hepatic fatty acid metabolism and the jejunal barrier in suckling piglets after maternal OSO exposure. A total of 18 sows in late gestation were randomly assigned to three treatments. The sows were fed with a fresh soybean oil (FSO) diet, an OSO diet, or the OSO diet supplemented with 300 mg/kg Res (OSO + Res), respectively. The results showed that maternal supplementation of Res restored the mRNA levels of genes related to fatty acid metabolism and increased the activities of catalase (CAT) and total superoxide dismutase (T-SOD) in suckling piglets' livers under the OSO challenge. Moreover, the OSO + Res group restored the mRNA levels of occludin and claudin 4 in suckling piglet jejunum compared with the results of the OSO challenges. In summary, supplementation with Res improves hepatic fatty acid metabolism and intestinal barrier function of suckling piglets after maternal OSO challenge during late gestation and lactation.