A pan-TE map highlights transposable elements underlying domestication and agronomic traits in Asian rice.

Transposable elements (TEs) are ubiquitous genomic components and hard to study due to being highly repetitive. Here we assembled 232 chromosome-level genomes based on long-read sequencing data. Coupling the 232 genomes with 15 existing assemblies, we developed a pan-TE map comprising both cultivated and wild Asian rice. We detected 177 084 high-quality TE variations and inferred their derived state using outgroups. We found TEs were one source of phenotypic variation during rice domestication and differentiation. We identified 1246 genes whose expression variation was associated with TEs but not single-nucleotide polymorphisms (SNPs), such as OsRbohB, and validated OsRbohB's relative expression activity using a dual-Luciferase (LUC) reporter assays system. Our pan-TE map allowed us to detect multiple novel loci associated with agronomic traits. Collectively, our findings highlight the contributions of TEs to domestication, differentiation and agronomic traits in rice, and there is massive potential for gene cloning and molecular breeding by the high-quality Asian pan-TE map we generated.

Synergistic effect between S and Te enhancing the electrochemical behavior of heteroatomic TeS-x cathodes in aqueous Zn-TeS batteries.

Aqueous Zn-S batteries (AZSBs) have garnered increasing attention in the energy storage field owing to their high capacity, energy density, and cost effectiveness. Nevertheless, sulfur (S) cathodes face challenges, primarily stemming from sluggish reaction kinetics and the formation of an irreversible byproduct (SO42-) during the charge, hindering the progress of AZSBs. Herein, Te-S bonds within S-based cathodes were introduced to enhance electron and ion transport and facilitate the conversion reaction from zinc sulfide (ZnS) to S. This was achieved by constructing heteroatomic TeS-x@Ketjen black composite cathodes (HM-TeS-x@KB, where x  = 36, 9, and 4). The HM-TeS-9@KB electrode exhibits long-term cycling stability, maintaining a capacity decay rate of 0.1 % per cycle over 450 cycles at a current density of 10 A g-1. Crucially, through a combination of experimental data analysis and theoretical calculations, the impact mechanism of Te on the charge and discharge of S active materials within the HM-TeS-9@KB cathode in AZSBs was investigated. The presence of Te-S bonds boost the intrinsic conductivity and wettability of the HM-TeS-9@KB cathode. Furthermore, during the charge, the interaction of preferentially oxidized Te with S atoms within ZnS promotes the oxidation reaction from ZnS to S and suppresses the irreversible side reaction between ZnS and H2O. These findings indicate that the heteroatomization of chalcogen S molecules represents a promising approach for enhancing the electrochemical performance of S cathodes in AZSBs.

The Reconstruction of Bi 2 Te 4 O 11 Nanorods for Efficient and pH-universal Electrochemical CO 2 Reduction.

The practical application of electrochemical CO2 reduction reaction (CO2RR) is hindered by the competing CO production, hydrogen evolution reaction (HER), and the lack of pH-universal catalysts. Here, Te-modified Bi nanorods (Te-Bi NRs) were synthesized through in situ reconstruction of Bi2Te4O11 NRs under the CO2RR condition. Our study illustrates that the complex reconstruction process of Bi2Te4O11 NRs during CO2RR could be decoupled into three distinct steps, i.e., the destruction of Bi2Te4O11, the formation of Te/Bi phases, and the dissolution of Te. The thus-obtained Te-Bi NRs exhibit remarkably high performance in CO2RR towards formate production, showing high activity, selectivity, and stability across all pH conditions (acidic, neutral, and alkaline). In a flow cell reactor under neutral, alkaline, or acidic conditions, the catalysts achieved HCOOH Faradaic efficiencies of up to 94.3%, 96.4%, and 91.0%, respectively, at a high current density of 300 mA cm-2. DFT calculations, along with operando spectral measurements, reveal that Te manipulates the Bi sites to an electron-deficient state, enhancing the adsorption strength of the *OCHO intermediate, and significantly suppressing the competing HER and CO production. This study highlights the substantial influence of catalyst reconstruction under operational conditions and offers insights into designing highly active and stable electrocatalysts towards CO2RR.

Hematological and neurological impact studies on the exposure to naturally occurring radioactive materials.

Naturally Occurring Radioactive Materials (NORM) contribute to everyone's natural background radiation dose. The technologically advanced activities of the gas and oil sectors produce considerable amounts of radioactive materials as industrial by-products or waste products. The goal of the current study is to estimate the danger of long-term liability to Technologically Enhanced Naturally Occurring Radioactive Materials (TE-NORM) on blood indices, neurotransmitters, oxidative stress markers, and ß-amyloid in the cerebral cortex of rats' brains. Twenty adult male albino rats were divided into two equal groups (n = 10): control and irradiated. Irradiated rats were exposed to a total dose of 0.016 Gy of TE-NORM as a whole-body chronic exposure over a period of two months. It should be ''The results showed no significant changes in RBC count, Hb concentration, hematocrit percentage (HCT%), and Mean Corpuscular Hemoglobin Concentration (MCHC). However, there was a significant increase in the Mean Corpuscular Volume of RBCs (MCV) and a significant decrease in cell distribution width (RDW%) compared to the control. Alteration in neurotransmitters is noticeable by a significant increase in glutamic acid and significant decreases in serotonin and dopamine. Increased lipid peroxidation, decreased glutathione content, superoxide dismutase, catalase, and glutathione peroxidase activities indicating oxidative stress were accompanied by increased ß-amyloid in the cerebral cortex of rats' brains. The findings of the present study showed that chronic radiation liability has some harmful effects, that may predict the risks of future health problems in occupational radiation exposure in the oil industries. Therefore, the control of exposure and application of sample dosimetry is recommended for health and safety.

Pt-Te-Nanorod-Based Photothermal Chemokine Immunotherapy for All Stages of Cancer via Adaptive and Innate Immunity.

The chemokine (C-X-C) motif ligand 9 (CXCL9) is one of the lymphocyte-traffic-involved chemokines. Despite the immunotherapeutic potential of CXCL9 for recruiting effector T cells (cluster of differentiation 4+ (CD4+) and CD8+ T cells) and natural killer cells (NK cells) around the tumors, practical applications of CXCL9 have been limited because of its immune toxicity and lack of stability in vivo. To overcome these limitations, we designed and synthesized Pt-Te nanorods (PtTeNRs), which exhibited excellent photothermal conversion efficiency with stable CXCL9 payload characteristics under the physiological conditions of in vivo environments. We developed a CXCL9-based immunotherapy strategy by utilizing the unique physicochemical properties of developed PtTeNRs. The investigation revealed that the PtTeNR-loaded CXCL9 was effectively accumulated in the tumor, subsequently released in a sustained manner, and successfully recruited effector T cells for immunotherapy of the designated tumor tissue. In addition, a synergistic effect was observed between the photothermal (PT) therapy and antiprogrammed cell death protein 1 (aPD-1) antibody. In this study, we demonstrated that PtTeNR-based CXCL9, PT, and aPD-1 antibody trimodal therapy delivers an outstanding tumor suppression effect in all stages of cancer, including phases 1-4 and tumor recurrence.

Metabolite T2 relaxation times decrease across the adult lifespan in a large multi-site cohort.

Purpose: Relaxation correction is crucial for accurately estimating metabolite concentrations measured using in vivo magnetic resonance spectroscopy (MRS). However, the majority of MRS quantification routines assume that relaxation values remain constant across the lifespan, despite prior evidence of T2 changes with aging for multiple of the major metabolites. Here, we comprehensively investigate correlations between T2 and age in a large, multi-site cohort. Methods: We recruited approximately 10 male and 10 female participants from each decade of life: 18-29, 30-39, 40-49, 50-59, and 60+ years old (n=101 total). We collected PRESS data at 8 TEs (30, 50, 74, 101, 135, 179, 241, and 350 ms) from voxels placed in white-matter-rich centrum semiovale (CSO) and gray-matter-rich posterior cingulate cortex (PCC). We quantified metabolite amplitudes using Osprey and fit exponential decay curves to estimate T2. Results: Older age was correlated with shorter T2 for tNAA, tCr3.0, tCr3.9, tCho, Glx, and tissue water in CSO and PCC; rs = -0.21 to -0.65, all p<0.05, FDR-corrected for multiple comparisons. These associations remained statistically significant when controlling for cortical atrophy. T2 values did not differ across the adult lifespan for mI. By region, T2 values were longer in the CSO for tNAA, tCr3.0, tCr3.9, Glx, and tissue water and longer in the PCC for tCho and mI. Conclusion: These findings underscore the importance of considering metabolite T2 changes with aging in MRS quantification. We suggest that future 3T work utilize the equations presented here to estimate age-specific T2 values instead of relying on uniform default values.

High Power Factor Flexible Ag2Te Film on Nylon by a Wet Chemical Method for Power Generator.

Herein, we develop a facile wet chemical method for the synthesis of Ag2Te powders at room temperature and flexible Ag2Te/nylon thermoelectric (TE) films are prepared by vacuum-assisted filtration of the synthesized Ag2Te powders and then hot pressing. Because of the good crystallinity of Ag2Te grains and continuous grain boundaries, an optimized film exhibits a power factor of 513 µW m-1 K-2 at 300 K, which stands among the highest values reported for Ag2Te-based films to date. In addition, the film also has good flexibility. A four-leg flexible TE device assembled with the film generates a power density of 5.46 W m-2 at a temperature gradient of 31.8 K. This work provides a facile and environmentally friendly method for preparing flexible Ag2Te films.

Stable chalcogenide Ge-Sb-Te heterostructures with minimal Ge segregation.

Matching of various chalcogenide films shows the advantage of delivering multilayer heterostructures whose physical properties can be tuned with respect to the ones of the constituent single films. In this work, (Ge-Sb-Te)-based heterostructures were deposited by radio frequency sputtering on Si(100) substrates and annealed up to 400 °C. The as-deposited and annealed samples were studied by means of X-ray fluorescence, X-ray diffraction, scanning transmission electron microscopy, electron energy loss spectroscopy and Raman spectroscopy. The heterostructures, combining thermally stable thin layers (i. e. Ge-rich Ge5.5Sb2Te5, Ge) and films exhibiting fast switching dynamics (i. e. Sb2Te3), show, on the one side, higher crystallization-onset temperatures than the standard Ge2Sb2Te5 alloy and, on the other side, none to minimal Ge-segregation.

Manipulation of Helicity-Dependent Photocurrent and Stokes Parameter Detection in Topological Insulator Bi2Te3 Nanowires.

Helicity-dependent photocurrent (HDPC) and its modulation in topological insulator Bi2Te3 nanowires have been investigated. It is revealed that when the incident plane of a laser is perpendicular to the nanowire, the HDPC is an odd function of the incident angle, which is mainly contributed by the circular photogalvanic effect originating from the surface states of Bi2Te3 nanowire. When the incident plane of a laser is parallel to the nanowire, the HDPC is approximately an even function of the incident angle, which is due to the circular photon drag effect coming from the surface states. It is found that the HDPC can be effectively tuned by the back gate and the ionic liquid top gate. By analyzing the substrate dependence of the HDPC, we find that the HDPC of the Bi2Te3 nanowire on the Si substrate is an order of magnitude larger than that on SiO2, which may be due to the spin injection from the Si substrate to the Bi2Te3 nanowire. In addition, by applying different biases, the Stokes parameters of a polarized light can be extracted by arithmetic operation of the photocurrents measured in the Bi2Te3 nanowire. This work suggests that topological insulator Bi2Te3 nanowires may provide a good platform for opto-spintronic devices, especially in chirality and polarimtry detection.

Sequentially Regulating Potential-Determining Step for Lowering CO2 Electroreduction Overpotential over Te-Doped Bi Nanotips.

Electrocatalytic conversion of CO2 into formate is recognized an economically-viable route to upgrade CO2, but requires high overpotential to realize the high selectivity owing to high energy barrier for driving the involved proton-coupled electron transfer (PCET) processes and serious ignorance of the second PCET. Herein, we surmount the challenge through sequential regulation of the potential-determining step (PDS) over Te-doped Bi (TeBi) nanotips. Computational studies unravel the incorporation of Te heteroatoms alters the PDS from the first PCET to the second one by substantially lowering the formation barrier for *OCHO intermediate, and the high-curvature nanotips induce enhanced electric field that can steer the formation of asymmetric *HCOOH. In this scenario, the thermodynamic barrier for *OCHO and *HCOOH can be sequentially decreased, thus enabling a high formate selectivity at low overpotential. Experimentally, distinct TeBi nanostructures are obtained via controlling Te content in the precursor and TeBi nanotips achieve >90% of Faradaic efficiency for formate production over a comparatively positive potential window (-0.57 V to -1.08 V). The strong Bi-Te covalent bonds also afford a robust stability. In an optimized membrane electrode assembly device, the formate production rate at 3.2 V reaches 10.1 mmol h-1 cm-2, demonstrating great potential for practical application.

Phenotellurazine redox catalysts: elements of design for radical cross-dehydrogenative coupling reactions.

Redox active phenotellurazine catalysts have been recently utilized in two different cross-dehydrogenative coupling reactions. In this study, we revisit the design of the phenotellurazine redox catalysts. In particular, we investigate the level of cooperativity between the Te- and N-centers, the effect of secondary versus tertiary N-centers, the effect of heterocyclic versus non-heterocyclic structures, and the effect of substitution patterns on the redox catalytic activity.

The Link between Abdominal Obesity Indices and the Progression of Liver Fibrosis: Insights from a Population-Based Study.

There is currently no available information on the correlation between abdominal obesity indices and the risk of liver fibrosis progression. We aimed to investigate the relationship between the body mass index (BMI), waist circumference (WC), and the visceral adiposity index (VAI) with the progression of liver fibrosis. The study also evaluated the association between these indices and the prevalence of metabolic dysfunction-associated steatotic liver disease (MASLD) and liver fibrosis. A total of 1403 subjects participated in the cross-sectional and longitudinal population-based study. Liver stiffness was assessed via transient elastography, at baseline and follow-up (median: 4.2 years). The subgroup with dysglycemia was also analyzed. In the cross-sectional study, the highest quartile of VAI, BMI ≥ 30 kg/m2, and abdominal obesity showed significant associations with the prevalence of MASLD and liver fibrosis, as well as with fibrosis progression. However, VAI showed no association with MASLD incidence. Among the dysglycemic subjects, there was no observed association between VAI and the incidence of MASLD or the progression of fibrosis. In conclusion, the BMI, WC, and the VAI are associated with an increased risk of progression to moderate-to-advanced liver fibrosis in the general population. However, the VAI does not perform better than the BMI and WC measurement.

Spectrally Tunable Lead-Free Perovskite Rb2ZrCl6:Te for Information Encryption and X-ray Imaging.

A series of lead-free Rb2ZrCl6:xTe4+ (x = 0%, 0.1%, 0.5%, 1.0%, 2.0%, 3.0%, 5.0%, 10.0%) perovskite materials were synthesized through a hydrothermal method in this work. The substitution of Te4+ for Zr in Rb2ZrCl6 was investigated to examine the effect of Te4+ doping on the spectral properties of Rb2ZrCl6 and its potential applications. The incorporation of Te4+ induced yellow emission of triplet self-trapped emission (STE). Different luminescence wavelengths were regulated by Te4+ concentration and excitation wavelength, and under a low concentration of Te4+ doping (x ≤ 0.1%), different types of host STE emission and Te4+ triplet state emission could be achieved through various excitation energies. These luminescent properties made it suitable for applications in information encryption. When Te4+ was doped at high concentrations (x ≥ 1%), yellow triplet state emission of Te4+ predominated, resulting in intense yellow emission, which stemmed from strong exciton binding energy and intense electron-phonon coupling. In addition, a Rb2ZrCl6:2%Te4+@RTV scintillating film was fabricated and a spatial resolution of 3.7 lp/mm was achieved, demonstrating the potential applications of Rb2ZrCl6:xTe4+ in nondestructive detection and bioimaging.

Influence of Heat Treatment Condition on the Microstructure, Microhardness and Corrosion Resistance of Ag-Sn-In-Ni-Te Alloy Wire.

Ag-Sn-In-Ni-Te alloy ingots were produced through a heating-cooling combined mold continuous casting technique; they were then drawn into wires. However, during the drawing process, the alloy wires tended to harden, making further diameter reduction challenging. To overcome this, heat treatment was necessary to soften the previously drawn wires. The study investigated how variations in heat treatment temperature and holding time affected the microstructure, microhardness and corrosion resistance of the alloy wires. The results indicate that the alloy wires subjected to heat treatment at 700 °C for 2 h not only exhibited a uniform microstructure distribution, but also demonstrated low microhardness and excellent corrosion resistance.

Using 5TE Sensors for Monitoring Moisture Conditions in Green Parks.

The ground surface and subsurface of green parks in arid and desert areas may be subjected to desiccation as a result of weather and hot temperatures. It is not wise to wait until plants are turning pale and yellow before watering is resumed. Given the scarcity of water in typical desert zones, we recommend full control of irrigation water. This study presents a method of recycling irrigation water using 5TE sensors, employing time-domain reflectometry (TDR) technology. A trial test section was constructed along the coast of the eastern province of Saudi Arabia. Water recycling involves using clay-sand liners placed below the top agricultural soils to intercept excess water and direct it towards a collection tank, and then it is pumped out to a major water supply tank. The main properties of soils and clay-sand liners normally taken into account include moisture content, density, and hydraulic conductivity. An assessment of geotechnical properties of clay-sand mixtures containing 20% clay content was conducted. The profiles of moisture and temperature changes were monitored using 5TE sensors and data loggers. The 5TE sensors provided continuous measurements at varying temperatures and watering cycles. Twenty-nine watering cycles were conducted over a six-month period. An additional section was considered with a liner consisting of the same clay but enhanced with bentonite as one-third of the clay content. The volumetric water content was found to vary from 0.150 to 0.565 following changing weather and direct watering cycles. The results indicated that the use of a TDR instrumentation is a cost-effective and time-saving technique to construct a system for saving irrigation water.

Tailorable acrylate-endcapped urethane-based polymers for precision in digital light processing: Versatile solutions for biomedical applications.

Bioengineering seeks to replicate biological tissues exploiting scaffolds often based on polymeric biomaterials. Digital light processing (DLP) has emerged as a potent technique to fabricate tissue engineering (TE) scaffolds. However, the scarcity of suitable biomaterials with desired physico-chemical properties along with processing capabilities limits DLP's potential. Herein, we introduce acrylate-endcapped urethane-based polymers (AUPs) for precise physico-chemical tuning while ensuring optimal computer-aided design/computer-aided manufacturing (CAD/CAM) mimicry. Varying the polymer backbone (i.e. poly(ethylene glycol) (PEG) versus poly(propylene glycol) (PPG)) and photo-crosslinkable endcap (i.e. di-acrylate versus hexa-acrylate), we synthesized a series of photo-crosslinkable materials labeled as UPEG2, UPEG6, UPPG2 and UPPG6. Comprehensive material characterization including physico-chemical and biological evaluations, was followed by a DLP processing parametric study for each material. The impact of the number of acrylate groups per polymer (2 to 6) on the physico-chemical properties was pronounced, as reflected by a reduced swelling, lower water contact angles, accelerated crosslinking kinetics, and increased Young's moduli upon increasing the acrylate content. Furthermore, the different polymer backbones also exerted a substantial effect on the properties, including the absence of crystallinity, remarkably reduced swelling behaviors, a slight reduction in Young's modulus, and slower crosslinking kinetics for UPPG vs UPEG. The mechanical characteristics of DLP-printed samples showcased the ability to tailor the materials' stiffness (ranging from 0.4 to 5.3 MPa) by varying endcap chemistry and/or backbone. The in vitro cell assays confirmed biocompatibility of the material as such and the DLP-printed discs. Furthermore, the structural integrity of 3D scaffolds was preserved both in dry and swollen state. By adjusting the backbone chemistry or acrylate content, the post-swelling dimensions could be customized towards the targeted application. This study showcases the potential of these materials offering tailorable properties to serve many biomedical applications such as cartilage TE.

The Loss of Estradiol by Androgen Deprivation in Prostate Cancer Patients Shows the Importance of Estrogens in Males.

The role of estradiol (E2; an estrogen) in men needs to be more appreciated. In this review, we address the clinical situations that allow the study of the clinical consequences of E2 deficiency in men and discuss the effects of restoration of levels of this reproductive steroid hormone. In men with advanced prostate cancer (PCa) undergoing androgen deprivation therapy (ADT), E2 is suppressed along with testosterone, leading to side effects affecting the quality of life. These include hot flashes, arthralgia, fatigue, mood changes, cognition problems, weight gain, bone loss, and increased risk of cardiovascular disease. Transdermal E2 alone for ADT has shown equivalent testosterone suppression compared to gonadotropin-releasing hormone (GnRH) agonists while also preventing estrogen-deficiency side effects, including hot flashes and bone loss. Co-treatment of ADT with fetal estrogen estetrol (E4) has shown significant improvements of estrogen-deficiency symptoms. These observations emphasize the need to raise awareness of the importance of estrogens in men among clinicians and the lay public.

High-Spike Barrier Photodiodes Based on 2D Te/WS2 Heterostructures.

Two-dimensional (2D) van der Waals (vdWs) heterojunctions have been actively investigated in low-power-consumption and fast-response photodiodes owing to their atomically smooth interfaces and ultrafast interfacial charge transfer. However, achieving ultralow dark current and ultrafast photoresponse in the reported photovoltaic devices remains a challenge as the large built-in electric field in a heterojunction can not only speed up photocarrier transport but also increase the minority-carrier dark current. Here, we propose a high-spike barrier photodiode that can achieve both an ultralow dark current and an ultrafast response. The device is fabricated by the Te/WS2 heterojunction, while the band alignment can transition from type-II to type-I with a high electron barrier and a large hole built-in electronic field. The high electron barrier can greatly reduce the drift current of minority carriers and the generation current of the thermal carriers, while the large built-in electronic field can still speed up the photocarrier transport. The designed Te/WS2 vdWs photodiode yields an ultralow dark current of 8 × 10-14 A and an ultrafast photoresponse of 10/13 µs. Furthermore, a high-performance visible-light imager with a pixel resolution of 100 × 40 is demonstrated using the Te/WS2 vdWs photodiode. This work provides a comprehensive understanding of designing 2D-material-based photovoltaics with excellent overall performance.

Ab Initio Studies of Electrocatalytic CO2 Reduction for Small Cu Cluster Supported on Polar Substrates.

Small Cu clusters are excellent candidates for the electrocatalytic reduction of carbon dioxide (CO2RR), and their catalytic performance is expected to be significantly influenced by the interaction between the substrate and cluster. In this study, we systematically investigate the CO2RR for a Cu3 cluster anchored on Janus MoSX (X = Se, Te) substrates using density functional theory calculations. These substrates feature a broken vertical mirror symmetry, which generates spontaneous out-of-plane polarization and offers two distinct polar surfaces to support the Cu3 cluster. Our findings reveal that the CO2RR performance on the Cu3 cluster is strongly influenced by the polarization direction and strength of the MoSX (X = Se, Te) substrates. Notably, the Cu3 cluster supported on the S-terminated MoSTe surface (Cu3(S)@MoSTe) demonstrates the highest CO2RR activity, producing methane. These results underscore the pivotal role of substrate polarization in modulating the binding strength of reactants and reaction intermediates, thereby enhancing the CO2RR efficiency.