A Review on Camel Milk Composition, Techno-Functional Properties and Processing Constraints.

Camel milk plays a critical role in the diet of peoples belongs to the semi-arid and arid regions. Since prehistoric times, camel milk marketing was limited due to lacking the processing facilities in the camel-rearing areas, nomads practiced the self-consumption of raw and fermented camel milk. A better understanding of the techno-functional properties of camel milk is required for product improvement to address market and customer needs. Despite the superior nutraceutical and health promoting potential, limited camel dairy products are available compared to other bovines. It is a challenging impetus for the dairy industry to provide diversified camel dairy products to consumers with superior nutritional and functional qualities. The physicochemical behavior and characteristics of camel milk is different than the bovine milk, which poses processing and technological challenges. Traditionally camel milk is only processed into various fermented and non-fermented products; however, the production of commercially important dairy products (cheese, butter, yogurt, and milk powder) from camel milk still needs to be processed successfully. Therefore, the industrial processing and transformation of camel milk into various products, including fermented dairy products, pasteurized milk, milk powder, cheese, and other products, require the development of new technologies based on applied research. This review highlights camel milk's processing constraints and techno-functional properties while presenting the challenges associated with processing the milk into various dairy products. Future research directions to improve product quality have also been discussed.

Molecular regulation of rapeseed protein for improving its techno-functional properties.

To improve the techno-functional properties of rapeseed protein (RP), this work tried to regulate the molecular structure of RP via inducing the co-assembly of RP with zein and whey protein (WP). The results showed that WP and zein mainly regulate the folding process of RP through hydrophobic and disulfide bonds, thereby altering the structural conformation and forming stable complex RP (CRP). WP addition not only increased the number of surface charges and hydrophilicity of proteins, but also decreased their sizes, improved the water solubility, as well as the availability of active groups. These changes significantly increased the foaming capacity (from 60 % to 147 %) and in vitro gastric digestion rate (from 10 % to 60 %) of CRP. Besides, WP also contributed to the formation of gels and the regulation of their textural profiles. Comparatively, zein improved the hydrophobicity of CRP and balanced degree of intermolecular forces, which effectively increased the emulsifying activity index of CRP from 22 m2/g to 90 m2/g. Zein decreased the hardness, springiness and water-holding capacity of gel, but increased its gumminess and chewiness. Overall, both WP and zein effectively changed the structural conformation of RP, and improved its techno-functional properties, which provides an effective strategy to modify protein.

Processing parameters, techno-functional properties and potential food application of lentil protein concentrate as an ingredient for the plant-based market.

Lentil (Lens culinaris) is a protein-rich legume consumed worldwide and it also has the potential to become an alternative source of protein ingredient for human nutrition. The aim of this study was to determine the best processing parameters for the whole grain protein wet extraction, as well as to analyze the techno-functional properties, and physical characteristics of the protein concentrate and its flour. It was also evaluated the application of the concentrate into a fish-like croquette. The processing route was carried out by alkaline extraction and acid precipitation of the proteins where the pH, stirring time and solute:solvent ratio were evaluated. The final dried protein concentrate presented 85% protein on dry basis and a mass yield of 14%. The results were reproducible when tested on a first scaling up test. For the techno-functional properties, solubility, water and oil retention capacities, emulsification and foaming capacities and stability, and gelling capacity were tested. As for the food application into fish-like croquettes, the lentil protein showed similar scores for sensory acceptance, flavor and texture when compared to a commercial clean-taste concentrate. The results observed in this study were compatible to other alternative pulse-protein ingredients on the market, positioning lentil protein as a promising alternative protein source to produce ingredients for the plant-based market.

Development and Validation of Miniaturized Assays to Assess Protein Techno-functional Properties.

Techno-functional properties of protein isolates such as emulsification, foaming, and gelling serve as key indicators to determine their food applications. Conventional macro-volume techniques used to measure these techno-functional properties are usually time consuming, require large amounts of protein samples, and are impractical when diverse protein samples are handled at the early screening stage. To overcome these issues, we have developed scaled-down (miniaturized) assays to test techno-functional properties of protein samples. These assays are simple, efficient, and require <400 µl of protein solution. Specifically, the miniaturized emulsification and gelling assays require 25-fold less protein than conventional macro-volume techniques and the miniaturized foaming assay requires 100-fold less sample. The performance of these assays has been thoroughly validated using conventional techno-functional tests for each parameter. The protocols described herein offer high-throughput screening capabilities, accelerating the testing process for protein techno-functional properties and allowing for quick identification of samples of interest from diverse samples. © 2024 Wiley Periodicals LLC. Basic Protocol 1: Miniaturized emulsification assay Alternate Protocol 1: Conventional macro-volume emulsification assay Basic Protocol 2: Miniaturized foaming assay Alternate Protocol 2: Conventional macro-volume foaming assay Basic Protocol 3: Miniaturized gelling assay Alternate Protocol 3: Conventional macro-volume gelling assay.

Supercritical CO2 Treatment to Modify Techno-Functional Properties of Proteins Extracted from Tomato Seeds.

Tomato seeds are a rich source of protein that can be utilized for various industrial food purposes. This study delves into the effects of using supercritical CO2 (scCO2) on the structure and techno-functional properties of proteins extracted from defatted tomato seeds. The defatted meal was obtained using hexane (TSMH) and scCO2 (TSMC), and proteins were extracted using water (PEWH and PEWC) and saline solution (PESH and PESC). The results showed that scCO2 treatment significantly improved the techno-functional properties of protein extracts, such as oil-holding capacity and foaming capacity (especially for PEWC). Moreover, emulsifying capacity and stability were enhanced for PEWC and PESC, ranging between 4.8 and 46.7% and 11.3 and 96.3%, respectively. This was made possible by the changes in helix structure content induced by scCO2 treatment, which increased for PEWC (5.2%) and decreased for PESC (8.0%). Additionally, 2D electrophoresis revealed that scCO2 hydrolyzed alkaline proteins in the extracts. These findings demonstrate the potential of scCO2 treatment in producing modified proteins for food applications.

Fermentation of cocoa pod husks with Pleurotus salmoneo-stramineus for food applications.

Cocoa pod husks (CPHs), the major side-stream from cocoa production, were valorized through fermentation with Pleurotus salmoneo-stramineus (PSS). Considering ergosterol as a biomarker for the fungal content, the mycelium accounted for 54% of the total biomass after 8 days in submerged cultures. The crude protein content of fermented CPH (CPHF) increased from 7.3 g/100 g DM in CPH to 18.9 g/100 g DM. CPH fermentation resulted in a high biological value of 86 for the protein. The water and oil binding capacities of CPHF were 3.5 mL/g and 2.1 mL/g, respectively. The particle diameter dv,0,90 of CPHF was 373 µm as compared to 526 µm for CPH. The total dietary fiber was 73.4 g/100 g DM in CPHF and 63.6 g/100 g DM in CPH. The amount of soluble fiber was 2.3 g/100 g DM in CPHF and 10.1 g/100 g DM in CPH; the insoluble fraction accounted for 71.1 g/100 g DM and 53.6 g/100 g DM, respectively. Bread doughs with CPH or CPHF were characterized for texture, color, and farinographic properties. The dough hardness, consistency, and browning index increased with the concentration of CPH, whereas for CPHF, springiness and peak viscosities declined. We demonstrate the upcycling of CPH into nutritious and functional ingredients through PSS fermentation.

Influence of the processing on composition, protein structure and techno-functional properties of mealworm protein concentrates produced by isoelectric precipitation and ultrafiltration/diafiltration.

Edible insects represent a great alternative protein source but food neophobia remains the main barrier to consumption. However, the incorporation of insects as protein-rich ingredients, such as protein concentrates, could increase acceptance. In this study, two methods, isoelectric precipitation and ultrafiltration-diafiltration, were applied to produce mealworm protein concentrates, which were compared in terms of composition, protein structure and techno-functional properties. The results showed that the protein content of the isoelectric precipitation concentrate was higher than ultrafiltration-diafiltration (80 versus 72%) but ash (1.91 versus 3.82%) and soluble sugar (1.43 versus 8.22%) contents were lower. Moreover, the protein structure was affected by the processing method, where the ultrafiltration-diafiltration concentrate exhibited a higher surface hydrophobicity (493.5 versus 106.78 a.u) and a lower denaturation temperature (161.32 versus 181.44 °C). Finally, the ultrafiltration-diafiltration concentrate exhibited higher solubility (87 versus 41%) and emulsifying properties at pH 7 compared to the concentrate obtained by isoelectric precipitation.

Modification of the physicochemical, functional, biochemical and structural properties of a soursop seed (Annona muricata L.) protein isolate treated with high-intensity ultrasound.

The obtained seeds from fruit processing are considered by-products containing proteins that could be utilized as ingredients in food manufacturing. However, in the specific case of soursop seeds, their usage for the preparation of protein isolates is limited. In this investigation a protein isolate from soursop seeds (SSPI) was obtained by alkaline extraction and isoelectric precipitation methods. The SSPI was sonicated at 200, 400 and 600 W during 15 and 30 min and its effect on the physicochemical, functional, biochemical, and structural properties was evaluated. Ultrasound increased (p < 0.05) up to 5 % protein content, 261 % protein solubility, 60.7 % foaming capacity, 30.2 % foaming stability, 86 % emulsifying activity index, 4.1 % emulsifying stability index, 85.4 % in vitro protein digestibility, 423.4 % albumin content, 83 % total sulfhydryl content, 316 % free sulfhydryl content, 236 % α-helix, 46 % ß-sheet, and 43 % ß-turn of SSPI, in comparison with the control treatment without ultrasound. Furthermore, ultrasound decreased (p < 0.05) up to 50 % particle size, 37 % molecular flexibility, 68 % surface hydrophobicity, 41 % intrinsic florescence spectrum, and 60 % random coil content. Scanning electron microscopy analysis revealed smooth structures of the SSPI with molecular weights ranging from 12 kDa to 65 kDa. The increase of albumins content in the SSPI by ultrasound was highly correlated (r = 0.962; p < 0.01) with the protein solubility. Improving the physicochemical, functional, biochemical and structural properties of SSPI by ultrasound could contribute to its utilization as ingredient in food industry.

Effect of microwave-assisted treatment on proximate, techno-functional, thermal, structural, and storage properties of TGN (Cyperus esculentus L.) flour.

BACKGROUND: The use of the emerging technique of microwave-assisted roasting on TGN (TGN) flour was investigated. Tiger nuts were subjected to microwave irradiation at 450, 600, and 900 W each at 5, 10, and 15 min, and milled to flour. The flours were analyzed for proximate, bioactive, techno-functional, morphological, thermal, and storage effects on their composition. An untreated sample was the control. RESULTS: The results revealed that microwave treatment significantly (P < 0.05) elicited various modifications in the proximate composition and techno-functional properties. The treatment improved the bioactive composition of phenolic content together with the antioxidant activity of the flour. Progressive microwave treatment of TGNs resulted in flours with darker colors and reduced pasting parameters. Structural modification of starch granules, protein denaturation, and starch-protein complexes occasioned by microwave treatment were evidenced in the functional group analysis, including morphological agglomeration, increased particle size, and thermal properties. Treatment also enhanced the microbiological qualities of flour after 8 weeks of storage. CONCLUSION: This study shows that microwave treatment produces excellent physical modifications that lead to improvements in the nutritional, functional, sensory, and color properties, and safety attributes of TGN flour for food application. This is a development that could present opportunities for novel food formulation by the food industry and related industries. © 2024 Society of Chemical Industry.

Evaluation of Sample Size Influence on Chemical Characterization and In Vitro Antioxidant Properties of Flours Obtained from Mushroom Stems Coproducts.

The mushroom industry generates large amounts of stem co-product. This is generated after mushroom harvest; stems are attached to the growth substratum, and their only use has traditionally been as compost. In this study, we investigated extensively for the first time this co-product and the influence of sample size (L->0.510 mm; LI-0.510-0.315 mm; SI-0.315-0.180 mm; S-<0.180 mm) on the characterization and antioxidant activity of flours obtained from stem co-products of Agaricus bisporus (ABSF) and Pleurotus ostreatus (POSF). ABSF was rich in protein (14 g/100 g), calcium (428.23-700.77 mg/100 g), and sorbitol (22.57-26.60 g/100 g), while POSF was rich in ß-glucans (36.62-40.34 g/100 g) and linoleic acid (20.57-39.86 g/100 g of lipid). Both species were flush in amino acids and had an umami flavour. ABSF showed more elevated values for emulsifying activity than POSF. The S sizes were highlighted for their yield, hydration properties, and oil holding capacity. Furthermore, ABSF-S exhibited heightened antioxidant capacity in vitro, in consonance with the total phenolic compounds observed (0.91 mg/g). However, the antioxidant assays in POSF presented a positive correlation with ß-glucan content. Our study suggests that these co-products could have several food-related applications, such as potential for use as an emulsifier, sweetener, or fortifier in the development of functional food, owing to their rich concentrations of fibre, protein, sorbitol, and ß-glucans. Nevertheless, it is necessary to understand the interactions of the flours with the potential food matrix prior to proceeding further with food-related applications.

UV-C Treatment Impact on the Availability of Water-Soluble Carbohydrates, Polyphenols, and Antioxidant Capacity of an Algerian Underutilized Date Fruit (Phoenix dactylifera L.).

Underutilized dates are considered as a socioeconomically important fruit for local and global communities, such as Degla-Beida, a common date fruit variety. The aim of this research was to elucidate, for the first time, the efficiency of UV-C light treatment (over different irradiation durations 5, 10, 20, and 40 min) in the enhancement of soluble carbohydrates and phenolic compounds, and to evaluate its effect on the antioxidant capacity. Furthermore, the content of dietary fiber was analyzed: insoluble dietary fiber (11.89 g/100 g); soluble dietary fiber (5.15 g/100 g); and total dietary fiber (17.06 g/100 g). The techno-functional properties were also determined: swelling capacity (3.94 mL/g); oil holding capacity (7.38 g/g); water holding capacity (9.30 g/g); and bulk density (1.81 g/mL). All were carried out to study the potential of exploiting this underutilized fruit for other applications as for feed or food. The results suggest that UV-C technology changes minimally the total water-soluble carbohydrate content; however, this preservation technology can affect the availability of different soluble carbohydrates depending on the irradiation time (IT), increasing the high molecular weight polysaccharides with IT up to 20 min, and some oligosaccharides with IT up to 5 min. The polyphenolic content determined by HPLC-QTOF was increased when the samples were submitted to UV-C reaching the maximum at 20 min (111.62 mg/100 g) and then to decrease in those submitted to IT of 40 min (12.05 mg/100 g). Regarding antioxidant capacity in the UV-C treated samples, FRAP decreased and EC50 on DPPH increased when IT was increased, while ORAC was hardly maintained. In addition, considering UV-C radiation associated with preservation and the studied date fruit as a rich source of dietary fiber with adequate techno-functional properties, this study presents valuable information for its potential use as a new food ingredient.

Functional and Antioxidative Characteristics of Soft Wheat and Tiger Nut (Cyperus esculentus) Flours Binary Blends.

Tiger nut (Cyperus esculentus) or chufa is little known plant of high nutritious content. Popularized by a plant-based drink called "horchata de chufa," it still offers a lot to research, being abundant in fat, starch, fiber and minerals and vitamins. To properly adjust this raw material to new purposes, the knowledge of crucial properties of the most basic blends like with soft wheat flour is needed. This article evaluates the techno-functional, viscometrical and bioactive characteristics of soft wheat:tiger nut blends of 5%, 10%, 15%, 20% and 25%. Granulometry, water-holding capacity (WHC), water absorption capacity (WAC), water absorption index (WAI), water solubility index (WSI), oil absorption capacity (OAC), hydrophilic/lipophilic index (HLI), color, pasting properties, total polyphenol content (TPC), antioxidant activity (DPPH), reducing sugars content and dough-rising capacity were assessed. The addition of tiger nut improved total polyphenol content of blends, however, It was observed that the addition of tiger nuts raised the total polyphenol content of the mixtures, but this was not statistically significant despite as much as 25% of tiger nuts. Oppositely, antioxidant activity was gradually improved with increasing tiger nut content. Pasting properties were impacted by tiger nut addition, lowering both pasting viscosity and trough viscosity, however, final viscosity was not particularly affected, being lowered by less than 15%. The highest water absorption was noted for 100% tiger nut both for WHC and WAC, however, WAI was the lowest for this sample. All the blends with tiger nut revealed improved dough-rising profile.

Effects of hydrocolloids and oleogel on techno-functional properties of dairy foods.

This paper aims to overview the influence of different gels that including hydrocolloids and oleogel on techno-functional changes of dairy foods. The hydrocolloids are widely added to dairy products as stabilizers, emulsifiers, and gelling agents to enhance their texture, or improve sensory properties to meet consumer needs; and the newly developed oleogel, which despite less discussed in dairy foods, this article lists its application in different dairy products. The properties of different hydrocolloids were explained in detail, meanwhile, some common hydrocolloids such as pectin, sodium alginate, carrageenan along with the interaction between gel and proteins on techno-functional properties of dairy products were mainly discussed. What's more, the composition of oleogel and its influence on dairy foods were briefly summarized. The key issues have been revealed that the use of both hydrocolloids and oleogel has great potential to be the future trend to improve the quality of dairy foods effectively.

Impact of germination on the techno-functional properties, nutritional composition, and health-promoting compounds of brown rice and its products: A review.

Rice is a popular grain and forms part of the daily diet of people throughout the world. However, the consumption of rice and its products is sometimes limited by its high glycemic index due to its high starch content, low protein content and quality, and low bioavailability of minerals due to the presence of anti-nutritional factors. This has partly stimulated research interest in recent times toward the use of bioprocessing techniques such as germination as cheap and natural means to improve the nutritional quality, digestibility, and health properties of cereals, including rice, to partially achieve nutrition and food security in the developing regions of the world. This review highlights the impact of germination on the nutritional quality, health-promoting properties, and techno-functional characteristics of germinated brown rice grains and their products. The review demonstrated that germinated rice grains and their products have improved nutritional quality and digestibility, modified functional properties, and showed antioxidant, anti-inflammatory, anti-diabetic, anti-obesity, anti-cancer, and anti-cardiovascular activities. Germination appears to be a suitable bioprocessing method to improve the nutritional quality and bioactive constituents and modify the techno-functional properties of rice grains for diverse food applications and improved global nutrition and food safety.

Techno-functional properties of dry-fractionated plant-based proteins and application in food product development: a review.

Dry-fractionated protein concentrates are gaining attention because they are produced using a versatile and sustainable technology, which can be applied to a wide range of plant material. To facilitate their utilization in new product development, it is crucial to obtain a comprehensive overview of their techno-functional properties. The present review aims to examine the techno-functional properties of dry-fractionated protein concentrates and describe their primary applications in food products, considering the published works in the last decade. The techno-functional properties of proteins, including water absorption capacity, emulsifying and foaming properties, gelling ability or protein solubility, are relevant factors to consider during food formulation. However, these properties are significantly influenced by the extraction technology, the type of protein and its characteristics. Overall, dry-fractionated proteins are characterized by high protein solubility, high foaming ability and foam stability, and high gelling ability. Such properties have been exploited in the development of food, such as bakery products and pasta, with the aim of increasing the protein content and enhancing the nutritional value. Additionally, innovative foods with distinctive textural and nutritional characteristics, such as meat and dairy analogues, have been developed by using dry-fractionated proteins. The results indicate that the study of these ingredients still needs to be improved, including their application with a broader range of plant materials. Nevertheless, this review could represent an initial step to obtaining an overview of the techno-functional properties of dry-fractionated proteins, facilitating their use in foods. © 2023 The Authors. Journal of The Science of Food and Agriculture published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry.

Modification of Physiochemical and Techno-Functional Properties of Stink Bean (Parkia speciosa) by Germination and Hydrothermal Cooking Treatment.

Stink bean, Parkia speciosa, is recognized as a significantly underutilized legume with versatile utility and diverse benefits. However, information on the impact of different processing methods, such as germination and hydrothermal cooking, is scarce on stink beans (SBs). Therefore, the current research aimed to explore the efficacy of germination (G) and hydrothermal cooking (HTC) on the physiochemical properties, proximate composition, techno-functional properties, and antioxidant potential of SB flour. Furthermore, Fourier transform infrared spectroscopy (FTIR) and field emission scanning electron microscopy (FESEM) were employed to assess structural and morphological changes. The results revealed that the physiochemical properties of SB were significantly enhanced through processing, with more pronounced improvements observed during germination. Additionally, SBG exhibited a significantly higher protein content and lower fat content compared to SBHTC and stink bean raw (SBR). Moreover, techno-functional properties such as color intensity, least gelation concentration, and pasting properties were significantly improved in SBG compared to SBHTC and SBR. FTIR analysis of SBG and SBHTC indicated structural modifications in the lipid, protein, and carbohydrate molecules. FESEM examination revealed morphological changes in SBG and SBHTC when compared to SBR. Importantly, SBG exhibited higher antioxidant activity and total phenolic content in comparison to SBHTC and SBR. Therefore, processed SB flour can be incorporated and utilized in product development, highlighting its potential as a plant-based protein source for protein-rich breakfast bars and cookies.

Recent advances in probiotic breads; a market trend in the functional bakery products.

Although bread is the main consumed staple food worldwide containing essential micro- and macronutrients, incorporation of probiotics (PRO) into this nondairy product has been less documented. Due to the mechanical and thermal stresses during bread-making process, production of PRO bread (PRO-BR) is dependent on development of emerging strategies like edible coating, encapsulation, three-dimensional printing, and application of thermophilic PRO strains. In the present study, novel technological and formulation aspects of PRO-BR, as well as critical conditions for obtaining products with guaranteed PRO potential have been reviewed. The biological functionality of these products, their scale up, marketing and commercial success factors are also highlighted. Production of functional PRO-BR containing bioactive compounds, phytochemicals and prebiotic components as an emerging field also affects dough rheology and textural features, sensory attributes and shelf-life of the final product. Recent data has revealed the effect of PRO on acrylamide content and staling rate of the produced bread. Furthermore, there are clinical evidences confirming the effects of PRO and synbiotic breads on reduction of triacylglycerol, low-density lipoprotein, insulin level and malondialdehyde, along with the increase of nitric oxide in the patients with type II diabetes.

High-Pressure Homogenization for Enhanced Bioactive Recovery from Tomato Processing By-Products and Improved Lycopene Bioaccessibility during In Vitro Digestion.

The principles of industrial ecology have emerged as pivotal drivers of eco-innovation, aiming to realize a "zero-waste" society where waste materials are repurposed as valuable resources. In this context, High-Pressure Homogenization (HPH) presents a promising, easily scalable micronization technology, capable of enhancing the extractability and bioaccessibility of bioactive compounds found in tomato processing by-products, which are notably abundant waste streams in the Mediterranean region. This study focuses on optimizing HPH treatment parameters to intensify the recovery of bioactive compounds from tomato pomace. Additionally, it investigates the multifaceted impacts of HPH on various aspects, including color, particle size distribution, microscopic characteristics, surface properties, bioactivity, and lycopene bioaccessibility through in vitro digestion simulations. The results demonstrate that the application of HPH under optimized conditions (80 MPa, 25 °C, 10 passes) induces a remarkable 8-fold reduction in mean particle size, reduced surface tension, improved physical stability, uniform color, increased total phenolic content (+31%), antioxidant activity (+30%), dietary fiber content (+9%), and lycopene bioaccessibility during the intestinal digestion phase compared to untreated samples. These encouraging outcomes support the proposition of integrating HPH technology into an environmentally friendly industrial process for the full valorization of tomato processing residues. By utilizing water as the sole solvent, this approach aims to yield a functional ingredient characterized by greater nutritional and health-promoting values.

Quantifying techno-functional properties of ingredients from multiple crops using machine learning.

Food ingredients with a low degree of refining consist of multiple components. Therefore, it is essential to formulate food products based on techno-functional properties rather than composition. We assessed the potential of quantifying techno-functional properties of ingredient blends from multiple crops as opposed to single crops. The properties quantified were gelation, viscosity, emulsion stability, and foaming capacity of ingredients from yellow pea and lupine seeds. The relationships were quantified using spline regression, random forest, and neural networks. Suitable models were picked based on model accuracy and physical feasibility of model predictions. A single model to quantify the properties of both crops could be created for each techno-functional property, albeit with a trade-off of higher prediction errors as compared to models based on individual crops. A reflection on the number of observations in each dataset showed that they could be reduced for some properties.

Design of Plant-Based Food: Influences of Macronutrients and Amino Acid Composition on the Techno-Functional Properties of Legume Proteins.

Imitating animal-based products using vegetable proteins is a technological challenge that can be mastered based on their techno-functional properties. These properties of legume proteins can be influenced by multiple factors, among which the macronutrients and amino acid contents play an important role. Therefore, the question arises as to what extent the techno-functional properties are related to these factors. The water- and oil-holding capacities and the emulsion and foaming properties of commercially available legume protein powders were analyzed. Correlations between macronutrient, amino acid content, steric structure, and techno-functional properties were conducted. However, the protein concentration is the focus of techno-functional properties, as well as the type of protein and the interaction with the non-protein ingredients. The type of protein is not always quantified by the quantity of amino acids or by their spatial arrangement. In this study, the effects of the three-dimensional structure were observed by the used purification method, which overshadow the influencing factors of the macronutrients and amino acid content. In summary, both the macronutrient and amino acid contents of legume proteins provide a rough indication but not a comprehensive statement about their techno-functional properties and classification in an adequate product context.