Projected augmented reality in DIEP flap breast reconstruction: Projecting perforators on the skin using dynamic infrared thermography.

BACKGROUND: Dynamic infrared thermography (DIRT) is a quick and non-invasive technique for perforator mapping in free flaps that provides real-time information. After a cold challenge, areas best supplied with blood become visible hotspots on color-coded maps, indicating perforators. This study presents a proof of principle for a new and innovative feature of DIRT, where projected augmented reality is used to directly display thermal images on the patient's abdomen prior to the deep inferior epigastric artery perforator (DIEP) flap breast reconstruction. METHODS: A self-aligning projection device prototype (Anatomy Projector) equipped with an integrated thermal camera was used to obtain thermal information and project the color-coded map directly on the patient's abdomen before DIEP flap breast reconstruction. Projected DIRT hotspots were verified using a hand-held Doppler, and compared to the vascularity on computed tomography angiography (CTA), and intraoperative perforator measurements following a Cartesian grid. RESULTS: A total of 514 DIRT hotspots were projected in 50 patients, among them 97.3% could be verified using Doppler. The positive predictive value for CTA was 74.5%. Intraoperative measurements yielded 132 perforators in 71 flaps, among them 75 perforators (56.8%) correlated with projected DIRT hotspots, and half of them (54.7%) appeared within the first 5 emerging hotspots. CONCLUSION: This study showed that real-time display of thermal data in DIEP flap breast reconstruction is feasible via projected augmented reality. Projection facilitates convenient marking of hotspots, and a high resemblance to Doppler and CTA data was observed. Further research should assess the added value of projecting thermal images intraoperatively and in other fields of plastic surgery.

Effect of transcutaneous neuromodulation on normalization of dermal body temperature and pain in a tender scar in the presence of low back pain: An update and case report.

Low back pain affects over 20% of individuals during their lifetime, and in some patients, it may be associated with scar tissue formation after surgery. Small-fiber neuropathy and scar tissue dysfunction can lead to localized pain by affecting signals to the thalamus. Transcutaneous neuromodulation using Tape with Magnetic Particles shows promise in relieving perceived pain, modulating vascularization and the autonomic nervous system, and reducing dermal temperature. In the present case, a 24-year-old woman with L5-S1 disk herniation experienced low back pain and leg pressure. The surgical intervention provided temporary relief, but scar restrictions caused pain recurrence. Tape with Magnetic Particles application initially induced scar hypothermia and pressure tolerance during posteroanterior tests on lumbar spinous processes increased, reducing pain perception for at least 12 h. Transcutaneous neuromodulation with Tape with Magnetic Particles modulated dermal temperature immediately and for 12 h, reducing perceived pain and sustaining improvement thereafter. This highlights the potential of Tape with Magnetic Particles in managing chronic low back pain associated with scar tissue.

Infrared thermography for normal endothelial function screening.

BACKGROUND: Endothelial dysfunction (ED) suspicion will allow to prevent accelerated atherosclerosis and premature death. OBJECTIVE: To establish the usefulness of thermography for endothelial function screening in adults with cardiovascular risk factors. MATERIAL AND METHODS: Cross-sectional, analytical diagnostic test. A brachial arterial diameter (BAD) increase < 11% at one-minute post-ischemia meant probable ED and was confirmed if BAD was ≥ 11% post-sublingual nitroglycerin. Thermographic photographs of the palmar region were obtained at one minute. Descriptive statistics, ROC curve, Mann-Whitney's U-test, chi-square test, or Fisher's exact test were used. RESULTS: Thirty-eight subjects with a median age of 50 years, and with 624 thermographic measurements were included. Nine had ED (flow-mediated vasodilation [FMV]: 2.5%). The best cutoff point for normal endothelial function in subjects with cardiovascular risk factors was ≥ 36 °C at one minute of ischemia, with 85% sensitivity, 70% specificity, positive and negative predictive values of 78 and 77%, area under the curve of 0.796, LR+ 2.82, LR- 0.22. CONCLUSION: An infrared thermography-measured temperature in the palmar region greater than or equal to 36 °C after one minute of ischemia is practical, non-invasive, and inexpensive for normal endothelial function screening in adults with cardiovascular risk factors.

ANTECEDENTES: La sospecha de disfunción endotelial (DE) permitirá prevenir la aterosclerosis acelerada y la muerte prematura. OBJETIVO: Establecer la utilidad de la termografía en el cribado de la función endotelial en adultos con factores de riesgo cardiovascular. MATERIAL Y MÉTODOS: Estudio transversal analítico de prueba diagnóstica. El incremento del diámetro de la arteria braquial < 11 % a un minuto posisquemia significó probable DE, confirmada si el diámetro fue ≥ 11 % posnitroglicerina sublingual. Se obtuvieron fotografías termográficas al minuto de la región palmar. Se aplicó estadística descriptiva, curva ROC, pruebas U de Mann-Whitney, chi cuadrada o exacta de Fisher. RESULTADOS: Se incluyeron 38 sujetos, mediana de edad de 50 años, con 624 mediciones termográficas; nueve presentaron DE (vasodilatación mediada por flujo de 2.5 %). El mejor punto de corte para la función endotelial normal en sujetos con factores de riesgo cardiovascular fue ≥ 36 °C al minuto de isquemia, con sensibilidad de 85%, especificidad de 70%, valores predictivos positivo y negativo de 78 y 77%, área bajo la curva de 0.796, razón de verisimilitud positiva de 2.82 y razón de verisimilitud negativa de 0.22. CONCLUSIÓN: La medición de la temperatura en la región palmar mediante termografía infrarroja ≥ 36 °C tras un minuto de isquemia es práctica, no invasiva y económica para el cribado de la función endotelial normal en adultos con factores de riesgo cardiovascular.

Thermal mapping the eye: A critical review of advances in infrared imaging for disease detection.

Infrared thermography (IRT) has become more accessible due to technological advancements, making thermal cameras more affordable. Infrared thermal cameras capture the infrared rays emitted by objects and convert it into temperature representations. IRT has emerged as a promising and non-invasive approach for examining the human eye. Ocular surface temperature assessment based on IRT is vital for the diagnosis and monitoring of various eye conditions like dry eye, diabetic retinopathy, glaucoma, allergic conjunctivitis, and inflammatory diseases. A collective sum of 192 articles was sourced from various databases, and through adherence to the PRISMA guidelines, 29 articles were ultimately chosen for systematic analysis. This systematic review article seeks to provide readers with a thorough understanding of IRT's applications, advantages, limitations, and recent developments in the context of eye examinations. It covers various aspects of IRT-based eye analysis, including image acquisition, processing techniques, ocular surface temperature measurement, three different approaches to identifying abnormalities, and different evaluation metrics used. Our review also delves into recent advancements, particularly the integration of machine learning and deep learning algorithms into IRT-based eye examinations. Our systematic review not only sheds light on the current state of research but also outlines promising future prospects for the integration of infrared thermography in advancing eye health diagnostics and care.

Use of Infrared Thermography and Heart Rate Variability to Evaluate Autonomic Activity in Domestic Animals.

Most of the responses present in animals when exposed to stressors are mediated by the autonomic nervous system. The sympathetic nervous system, known as the one responsible for the "fight or flight" reaction, triggers cardiovascular changes such as tachycardia or vasomotor alterations to restore homeostasis. Increase in body temperature in stressed animals also activates peripheral compensatory mechanisms such as cutaneous vasodilation to increase heat exchange. Since changes in skin blood flow influence the amount of heat dissipation, infrared thermography is suggested as a tool that can detect said changes. The present review aims to analyze the application of infrared thermography as a method to assess stress-related autonomic activity, and their association with the cardiovascular and heart rate variability in domestic animals.

Analyzing the Thermal Characteristics of Three Lining Materials for Plantar Orthotics.

INTRODUCTION: The choice of materials for covering plantar orthoses or wearable insoles is often based on their hardness, breathability, and moisture absorption capacity, although more due to professional preference than clear scientific criteria. An analysis of the thermal response to the use of these materials would provide information about their behavior; hence, the objective of this study was to assess the temperature of three lining materials with different characteristics. MATERIALS AND METHODS: The temperature of three materials for covering plantar orthoses was analyzed in a sample of 36 subjects (15 men and 21 women, aged 24.6 ± 8.2 years, mass 67.1 ± 13.6 kg, and height 1.7 ± 0.09 m). Temperature was measured before and after 3 h of use in clinical activities, using a polyethylene foam copolymer (PE), ethylene vinyl acetate (EVA), and PE-EVA copolymer foam insole with the use of a FLIR E60BX thermal camera. RESULTS: In the PE copolymer (material 1), temperature increases between 1.07 and 1.85 °C were found after activity, with these differences being statistically significant in all regions of interest (p < 0.001), except for the first toe (0.36 °C, p = 0.170). In the EVA foam (material 2) and the expansive foam of the PE-EVA copolymer (material 3), the temperatures were also significantly higher in all analyzed areas (p < 0.001), ranging between 1.49 and 2.73 °C for EVA and 0.58 and 2.16 °C for PE-EVA. The PE copolymer experienced lower overall overheating, and the area of the fifth metatarsal head underwent the greatest temperature increase, regardless of the material analyzed. CONCLUSIONS: PE foam lining materials, with lower density or an open-cell structure, would be preferred for controlling temperature rise in the lining/footbed interface and providing better thermal comfort for users. The area of the first toe was found to be the least overheated, while the fifth metatarsal head increased the most in temperature. This should be considered in the design of new wearables to avoid excessive temperatures due to the lining materials.

Design and evaluation of an AR-based thermal imaging system for planning reconstructive surgeries.

INTRODUCTION: Thermal imaging can be used for the non-invasive detection of blood vessels of the skin. However, mapping the results to the patient currently lacks user-friendliness. Augmented reality may provide a useful tool to superimpose thermal information on the patient. METHODS: A system to support planning in reconstructive surgery using a thermal camera was designed. The obtained information was superimposed on the physical object using a Microsoft HoloLens. An RGB, depth, and thermal camera were combined to capture a scene of different modalities and reconstruct a virtual scene in real time. To register the different cameras and the AR device, an active calibration target was developed and evaluated. A Vuforia marker was used to register the hologram in the virtual space. The accuracy of the projected hologram was evaluated in a laboratory setting with participants by measuring the error between the physical object and the hologram. RESULTS: The AR-based system was evaluated by 21 participants in a laboratory setting. The mean projection error is 10.3 ± 9.4 mm. The system is able to stream a three-dimensional scene with augmented thermal information in real time at 5 frames per second. The active calibration target can be used independently of the environment. CONCLUSION: The calibration target provides an easy-to-use method for the registration of cameras capturing the visible to long-infrared spectral range. The inside-out tracking of the HoloLens in combination with a Vuforia marker is not accurate enough for the intended clinical use.

Facial and ocular thermal mapping in black-and-gold howler monkey (Alouatta caraya) by infrared thermography: An ex situ study.

BACKGROUND: This study used infrared thermography (IRT) for mapping the facial and ocular temperatures of howler monkeys, to determine parameters for the diagnosis of febrile processes. There are no published IRT study in this species. METHODS: Were evaluated images of a group of monkeys kept under human care at Sorocaba Zoo (São Paulo, Brazil). The images were recorded during 1 year, in all seasons. Face and eye temperatures were evaluated. RESULTS: There are statistically significant differences in face and eye temperatures. Mean values and standard deviations for facial and ocular temperature were respectively: 33.0°C (2.1) and 36.5°C (1.9) in the summer; 31.5°C (4.5) and 35.3°C (3.6) in the autumn; 30.0°C (4.3) and 35.6°C (3.9) in the winter; 30.8°C (2.9) and 35.5°C (2.1) in the spring. CONCLUSIONS: The IRT was effective to establish a parameter for facial and ocular temperatures of black-and-gold howler monkeys kept under human care.

Combining analytical techniques to assess the translocation of diesel particles across an alveolar tissue barrier in vitro.

BACKGROUND: During inhalation, airborne particles such as particulate matter ≤ 2.5 µm (PM2.5), can deposit and accumulate on the alveolar epithelial tissue. In vivo studies have shown that fractions of PM2.5 can cross the alveolar epithelium to blood circulation, reaching secondary organs beyond the lungs. However, approaches to quantify the translocation of particles across the alveolar epithelium in vivo and in vitro are still not well established. In this study, methods to assess the translocation of standard diesel exhaust particles (DEPs) across permeable polyethylene terephthalate (PET) inserts at 0.4, 1, and 3 µm pore sizes were first optimized with transmission electron microscopy (TEM), ultraviolet-visible spectroscopy (UV-VIS), and lock-in thermography (LIT), which were then applied to study the translocation of DEPs across human alveolar epithelial type II (A549) cells. A549 cells that grew on the membrane (pore size: 3 µm) in inserts were exposed to DEPs at different concentrations from 0 to 80 µg.mL- 1 ( 0 to 44 µg.cm- 2) for 24 h. After exposure, the basal fraction was collected and then analyzed by combining qualitative (TEM) and quantitative (UV-VIS and LIT) techniques to assess the translocated fraction of the DEPs across the alveolar epithelium in vitro. RESULTS: We could detect the translocated fraction of DEPs across the PET membranes with 3 µm pore sizes and without cells by TEM analysis, and determine the percentage of translocation at approximatively 37% by UV-VIS (LOD: 1.92 µg.mL- 1) and 75% by LIT (LOD: 0.20 µg.cm- 2). In the presence of cells, the percentage of DEPs translocation across the alveolar tissue was determined around 1% at 20 and 40 µg.mL- 1 (11 and 22 µg.cm- 2), and no particles were detected at higher and lower concentrations. Interestingly, simultaneous exposure of A549 cells to DEPs and EDTA can increase the translocation of DEPs in the basal fraction. CONCLUSION: We propose a combination of analytical techniques to assess the translocation of DEPs across lung tissues. Our results reveal a low percentage of translocation of DEPs across alveolar epithelial tissue in vitro and they correspond to in vivo findings. The combination approach can be applied to any traffic-generated particles, thus enabling us to understand their involvement in public health.

Excessive Heat Generation by Power-driven Craniotomy Tools: A Possible Cause of Autologous Bone Flap Resorption Observed in an Ex Vivo Simulation.

BACKGROUND: Bone flap resorption is an issue after autologous cranioplasty. Critical temperatures above 50°C generated by power-driven craniotomy tools may lead to thermal osteonecrosis, a possible factor in resorption. This ex vivo study examined whether the tools produced excessive heat resulting in bone flap resorption. METHODS: Using swine scapulae maintained at body temperature, burr holes, straight and curved cuts, and wire-pass holes were made with power-driven craniotomy tools. Drilling was at the conventional feed rate (FR) plus irrigation (FR-I+), at a high FR plus irrigation (hFR-I+), and at high FR without irrigation (hFR-I-). The temperature in each trial was recorded by an infrared thermographic camera. RESULTS: With FR-I+, the maximum temperature at the burr holes, the cuts, and the wire-pass holes was 69.0°C, 56.7°C, and 46.2°C, respectively. With hFR-I+, these temperatures were 53.1°C, 52.1°C, and 46.0°C, with hFR-I- they were 56.0°C, 66.5°C, and 50.0°C; hFR-I- burr hole- and cutting procedures resulted in the highest incidence of bone temperatures above 50°C followed by FR-I+, and hFR-I+. At the site of wire-pass holes, only hFR-I- drilling produced this temperature. CONCLUSIONS: Except during prolonged procedures in thick bones, most drilling with irrigation did not reach the critical temperature. Drilling without irrigation risked generating the critical temperature. Knowing those characteristics may be a help to perform craniotomy with less thermal bone damage.

Subclinical joint inflammation in rheumatoid arthritis: comparing thermal and ultrasound imaging at the metacarpophalangeal joint.

BACKGROUND: While ultrasound and MRI are both superior to clinical examination in the detection of joint inflammation, there is presently a lack of data whether thermography may be similarly useful in the assessment of joint inflammation in patients with RA. Our study aims to evaluate the use of thermography in detecting subclinical joint inflammation at clinically quiescent (non-tender and non-swollen) metacarpophalangeal joints (MCPJs) in patients with rheumatoid arthritis (RA). The outcomes from thermography in our study will be compared with ultrasonography (which is a more established imaging tool used for joint inflammation assessment in RA). METHODS: The minimum (Tmin), average (Tavg) and maximum (Tmax) temperatures at the 10 MCPJs of each patient were summed to obtain the Total Tmin, Total Tavg and Total Tmax, respectively. Ultrasound grey-scale (GS) and power Doppler (PD) joint inflammation (scored semi-quantitatively, 0-3) at the 10 MCPJs were summed up to derive the respective TGS and TPD scores per patient. Pearson's correlation and simple linear regression were respectively used to assess correlation and characterize relationships between thermographic parameters (Total Tmin, Total Tavg and Total Tmax) and ultrasound imaging parameters (TGS, TPD and the number of joint(s) with PD ≥ 1 or GS ≥ 2). RESULTS: In this cross-sectional study, 420 clinically non-swollen and non-tender MCPJs from 42 RA patients were examined. All thermographic parameters (Total Tmin, Total Tavg and Total Tmax) correlated significantly (P-values ranging from 0.001 to 0.0012) with TGS score (correlation coefficient ranging from 0.421 to 0.430), TPD score (correlation coefficient ranging from 0.383 to 0.424), and the number of joint(s) with PD ≥ 1 or GS ≥ 2 (correlation coefficient ranging from 0.447 to 0.465). Similarly, simple linear regression demonstrated a statistically significant relationship (P-values ranging from 0.001 to 0.005) between all thermographic parameters (Total Tmin, Total Tavg and Total Tmax) and ultrasound imaging parameters (TPD and TGS). CONCLUSION: For the first time, thermographic temperatures were shown to correlate with ultrasound-detected joint inflammation at clinically quiescent MCPJs. The use of thermography in the detection of subclinical joint inflammation in RA appears promising and warrants further investigation.

Infrared Thermography Shows That a Temperature Difference of 2.2°C (4°F) or Greater Between Corresponding Sites of Neuropathic Feet Does Not Always Lead to a Diabetic Foot Ulcer.

BACKGROUND: There is emerging interest in the application of foot temperature monitoring as means of diabetic foot ulcer (DFU) prevention. However, the variability in temperature readings of neuropathic feet remains unknown. The aim of this study was to analyze the long-term consistency of foot thermograms of diabetic feet at the risk of DFU. METHODS: A post-hoc analysis of thermal images of 15 participants who remained ulcer-free during a 12-month follow-up were unblinded at the end of the trial. Skin foot temperatures of 12 plantar, 15 dorsal, 3 lateral, and 3 medial regions of interests (ROIs) were derived on monthly thermograms. The temperature differences (∆Ts) of corresponding ROIs of both feet were calculated. RESULTS: Over the 12-month study period, out of the total 2026 plantar data points, 20.3% ROIs were rated as abnormal (absolute ∆T ≥ 2.2°C). There was a significant between-visit variability in the proportion of plantar ROIs with ∆T ≥ 2.2°C (range 7.6%-30.8%, chi-square test, P = .001). The proportion of patients presenting with hotspots (ROIs with ∆T ≥ 2.2°C), abnormal plantar foot temperature (mean ∆T of 12 plantar ROIs ≥ 2.2°C), and abnormal whole foot temperature (mean ∆T of 33 ROIs ≥ 2.2°C) varied between visits and showed no pattern (P > .05 for all comparisons). This variability was not related to the season of assessment. CONCLUSIONS: Despite the high rate of hotspots on monthly thermograms, all feet remained intact. This study underscores a significant between-visit inconsistency in thermal images of neuropathic feet which should be considered when planning DFU-prevention programs for self-testing and behavior modification.

Enhanced thyroid nodule segmentation through U-Net and VGG16 fusion with feature engineering: A comprehensive study.

BACKGROUND AND OBJECTIVE: The thyroid gland, a key component of the endocrine system, is pivotal in regulating bodily functions. Thermography, a non-invasive imaging technique utilizing infrared cameras, has emerged as a diagnostic tool for thyroid-related conditions, offering advantages such as early detection and risk stratification. Artificial intelligence (AI) has demonstrated success in medical diagnostics, and its integration into thermal imaging analysis holds promise for improving diagnostic capabilities. This study aims to explore the potential of AI, specifically convolutional neural networks (CNNs), in enhancing the analysis of thyroid thermograms for the detection of nodules and abnormalities. METHODS: Artificial intelligence (AI) and machine learning techniques are integrated to enhance thyroid thermal image analysis. Specifically, a fusion of U-Net and VGG16, combined with feature engineering (FE), is proposed for accurate thyroid nodule segmentation. The novelty of this research lies in leveraging feature engineering in transfer learning for the segmentation of thyroid nodules, even in the presence of a limited dataset. RESULTS: The study presents results from four conducted studies, demonstrating the efficacy of this approach even with a limited dataset. It's observed that in study 4, using FE has led to a significant improvement in the value of the dice coefficient. Even for the small size of the masked region, incorporating radiomics with FE resulted in significant improvements in the segmentation dice coefficient. It's promising that one can achieve higher dice coefficients by employing different models and refining them. CONCLUSION: The findings here underscore the potential of AI for precise and efficient segmentation of thyroid nodules, paving the way for improved thyroid health assessment.

Measurement of the reaction enthalpy of CO2 in aqueous solutions with thermographic and gravimetric methods.

In this work, a new concept for the approximate determination of the reaction enthalpy of the reaction between CO2 and monoethanolamine (MEA) in aqueous solution was developed. For this purpose, a CO2 gas stream was flowed into aqueous MEA solutions with different concentrations of 1 wt%, 2.5 wt% and 7.5 wt%. The weight difference ∆T, which is based on the increase in CO2 bound by the MEA over time, was documented using a thermographic camera. The mass difference ∆m, which is also based on the increase in CO2 bound by the MEA over time, was determined using a balance. By determining ∆T and ∆m, an approximate calculation of the reaction enthalpy is possible. The deviation from the values from the data known from the literature was less than 5% in all experiments.

Accuracy of infrared thermography evaluation in burn wound healing: a systematic review and meta-analysis.

OBJECTIVE: Accurate assessment of burn depth and burn wound healing potential is essential to determine early treatments. Infrared thermography (IRT) is a non-invasive and objective tool to do this. This systematic review evaluated the accuracy of IRT to determine burn wound healing potential. METHOD: This systematic review and meta-analysis used MEDLINE, EMBASE, CINAHL, PEDro, DiTA and CENTRAL databases. IRT data were extracted from primary studies and categorised into four cells (i.e., true positives, false positives, true negatives and false negatives). Subgroup analysis was performed according to methods used to capture thermal images. RESULTS: The search strategy identified 2727 publications; however, 15 articles were selected for review and 11 for meta-analysis. In our meta-analysis, the accuracy of IRT was 84.8% (63% sensitivity and 81.9% specificity). CONCLUSION: IRT is a moderately accurate tool to identify burn depth and healing potential. Thus, IRT should be used carefully for evaluating burn wounds.

Exploring the body surface temperature of the lumbosacral region and relevant back-shu points in patients with lumbar disc herniation induced low back pain based on infrared thermography. / åŸºäºŽçº¢å¤–çƒ­æˆåƒæŠ€æœ¯æŽ¢è®¨è °æ¤Žé—´ç›˜çªå‡ºç—‡è °ç—›æ‚£è€ è °éª¶éƒ¨åŠç›¸å ³èƒŒä¿žç©´è¡¨çš®æ¸©åº¦.

OBJECTIVES: To observe the body surface temperature of the lumbosacral region and relevant back-shu points in patients with lumbar disc herniation (LDH) induced low back pain utilizing infrared thermography, and to explore the functional attribute changes of acupoints under pathological conditions. METHODS: A total of 50 patients with LDH induced low back pain were included as the observation group, and 45 healthy subjects were included as the control group. Using infrared thermography, the body surface temperature of the lumbosacral region and bilateral Sanjiaoshu (BL 22), Shenshu (BL 23), Qihaishu (BL 24), Dachangshu (BL 25), Guanyuanshu (BL 26), Xiaochangshu (BL 27), and Pangguangshu (BL 28) was measured in both groups. The temperature difference values between the bilateral lumbosacral regions and back-shu points of the two groups were calculated. Additionally, the body surface temperature of the affected and healthy sides of the lumbosacral region and relevant back-shu points was compared in the observation group. RESULTS: Compared with the control group, the body surface temperature of the lumbosacral region and the bilateral temperature difference values of the lumbosacral regions were increased in the observation group (P<0.001). The body surface temperature difference values of bilateral Shenshu (BL 23), Qihaishu (BL 24), Dachangshu (BL 25), Guanyuanshu (BL 26) and Xiaochangshu (BL 27) in the observation group were higher than those in the control group (P<0.05, P<0.01, P<0.001). In the observation group, the body surface temperature of the affected side of the lumbosacral region as well as Shenshu (BL 23) and Dachangshu (BL 25) was elevated compared with that of healthy side (P<0.001). CONCLUSIONS: The patients with LDH induced low back pain have imbalanced and asymmetrical distribution of body surface temperature in the lumbosacral region and related back-shu points, Shenshu (BL 23) and Dachangshu (BL 25) have the relative specificity.

Infrared Thermography Monitoring of Durum and Common Wheat for Adaptability Assessing and Yield Performance Prediction.

Wheat is one of the most cultivated cereals thanks to both its nutritional value and its versatility to technological transformation. Nevertheless, the growth and yield of wheat, as well as of the other food crops, can be strongly limited by many abiotic and biotic stress factors. To face this need, new methodological approaches are required to optimize wheat cultivation from both a qualitative and quantitative point of view. In this context, crop analysis based on imaging techniques has become an important tool in agriculture. Thermography is an appealing method that represents an outstanding approach in crop monitoring, as it is well suited to the emerging needs of the precision agriculture management strategies. In this work, we performed an on-field infrared monitoring of several durum and common wheat varieties to evaluate their adaptability to the internal Mediterranean area chosen for cultivation. Two new indices based on the thermal data useful to estimate the agronomical response of wheat subjected to natural stress conditions during different phenological stages of growth have been introduced. The comparison with some productive parameters collected at harvest highlighted the correlation of the indices with the wheat yield (ranging between p < 0.001 and p < 0.05), providing interesting information for their early prediction.

An Active Thermography approach for materials characterisation of thermal management systems for Lithium-ion batteries.

The aim of this work is an alternative non destructive technique for estimating the thermal properties of four different Thermal Management System (TMS) materials. More in detail, a thermographic setup realized with the Active Thermography approach (AT) is utilized for the purpose and the data elaboration follows the ISO 18755 Standard. As well known, Phase Changes Materials (PCMs) represent an innovative solution in the Thermal Management System (TMS) of Lithium-Ion batteries and, during the years, many solutions were developed to improve its thermal properties. As a matter of fact, parameters such as the internal temperature or heat exchanges impact on both efficiency and safety of the whole battery system. Consequently, the thermal conductivity was often chosen as a performance indicator of Thermal Management System (TMS) materials. In this work, both thermal diffusivity and thermal conductivity were estimated in two different testing conditions, respectively at room temperature and higher temperature conditions. The Active Thermography (AT) technique proposed in this activity has satisfactory estimated both thermal diffusivity and thermal conductivity of Thermal Management System (TMS) materials. An analytical model was also developed to reproduce the temperature experimental profiles. Finally, results obtained with AT approach were compared to those available from commercial datasheet and literature.

Thermal Imaging for Burn Wound Depth Assessment: A Mixed-Methods Implementation Study.

Background: Implementing innovations emerging from clinical research can be challenging. Thermal imagers provide an accessible diagnostic tool to increase the accuracy of burn wound depth assessment. This mixed-methods implementation study aimed to assess the barriers and facilitators, design implementation strategies, and guide the implementation process of thermal imaging in the outpatient clinic of a burn centre. Methods: This study was conducted between September 2022 and February 2023 in Beverwijk, The Netherlands. Semi-structured interviews with burn physicians guided by the Consolidated Framework for Implementation Research (CFIR) were conducted to identify barriers and facilitators. Based on the barriers, implementation strategies were developed with the CFIR-ERIC Matching Tool, and disseminated to support the uptake of the thermal imager. Subsequently, thermal imaging was implemented in daily practice, and an iterative RE-AIM approach was used to evaluate the implementation process. Results: Common facilitators for the implementation of the thermal imager were the low complexity, the relative advantage above other diagnostic tools, and benefits for patients. Common barriers were physicians' attitude towards and perceived value of the intervention, the low compatibility with the current workflow, and a lack of knowledge about existing evidence. Six implementation strategies were developed: creating a formal implementation blueprint, promoting adaptability, developing educational materials, facilitation, conducting ongoing training, and identifying early adopters. These strategies resulted in the effective implementation of the thermal imager, reflected by a >70% reach among eligible patients, and >80% effectiveness and adoption. Throughout the implementation process, compatibility, and available resources remained barriers, resulting in low ratings on RE-AIM dimensions. Conclusions: This study developed implementation strategies based on the identified CFIR constructs that impacted the implementation of a thermal imager for burn wound assessment in our outpatient clinic. The experiences and findings of this study could be leveraged to guide the implementation of thermal imaging and other innovations in burn care.

Using Infrared Thermography for High-Throughput Plant Phenotyping.

Infrared thermography offers a rapid, noninvasive method for measuring plant temperature, which provides a proxy for stomatal conductance and plant water status and can therefore be used as an index for plant stress. Thermal imaging can provide an efficient method for high-throughput screening of large numbers of plants. This chapter provides guidelines for using thermal imaging equipment and illustrative methodologies, coupled with essential considerations, to access plant physiological processes.