Detoxification of vancomycin fermentation residue by hydrothermal treatment and pyrolysis: Chemical analysis and toxicity tests.

Vancomycin fermentation residue (VFR) is a by-product of the pharmaceutical industry with high ecotoxicity caused by the residual antibiotics, antibiotic resistance genes (ARGs), and heavy metals (HMs). In this study, the detoxification effect of hydrothermal treatment (HT) and pyrolysis for VFR was assessed using chemical analysis and toxicity tests. When VFR was subjected to HT and pyrolysis at ≥400 °C, more than 99.70 % of the residual vancomycin and all ARGs were removed. The HMs contents in VFR followed the order of manganese (676.2 mg/kg) > zinc (148.6 mg/kg) > chromium (25.40 mg/kg) > copper (17.20 mg/kg), and they were highly bioavailable and easily leached. However, HT and pyrolysis (≥400 °C) substantially reduced the bioavailable fractions and leaching properties of the HMs. After HT and pyrolysis at ≥ 400 °C, the potential ecological risk of HMs in VFR was reduced from considerable to moderate/low levels. The elutriate acute toxicity test suggested that HT and pyrolysis at ≥ 400 °C effectively reduced the toxicity of VFR to an acceptable level (p < 0.05). This study demonstrates that HT and pyrolysis (≥400 °C) are promising methods for treating VFR and detoxifying it, and the treated products are safe for further reutilization.

Mechanistic insight into heteroatom removal from vacuum gas oil blended with PMMA or PET waste.

This work analyzes vacuum gas oil (VGO) and hydrocracking products of feed blended with polymethylmethacrylate (PMMA) or polyethylene terephthalate (PET) in depth to clarify the oxygen, nitrogen, and sulfur removal pathways in these complex mixtures. Hydrocracking reactions are conducted in a semi-batch reactor with a Pt-Pd/HY bifunctional catalyst at 400 °C and 80 bar for 300 min with 10 wt% waste plastic using 0.1 catalyst/feed weight ratio. The samples are analyzed using various techniques, including high-resolution mass spectrometry, providing an improved, more detailed analytical representation. The results demonstrate the synergistic effect of cofeeding oxygenated plastics to the VGO, altering the preferential reaction pathways of heteroatom-containing species in the following order: nitrogen, oxygen, and sulfur. We assess the chemical structures from the gathered data, establish plausible reaction mechanisms, and evaluate the catalyst's role.

A review on sustainable management of biomass: physicochemical modification and its application for the removal of recalcitrant pollutants-challenges, opportunities, and future directions.

Adsorption is one of the most efficient methods for remediating industrial recalcitrant wastewater due to its simple design and low investment cost. However, the conventional adsorbents used in adsorption have several limitations, including high cost, low removal rates, secondary waste generation, and low regeneration ability. Hence, the focus of the research has shifted to developing alternative low-cost green adsorbents from renewable resources such as biomass. In this regard, the recent progress in the modification of biomass-derived adsorbents, which are rich in cellulosic content, through a variety of techniques, including chemical, physical, and thermal processes, has been critically reviewed in this paper. In addition, the practical applications of raw and modified biomass-based adsorbents for the treatment of industrial wastewater are discussed extensively. In a nutshell, the adsorption mechanism, particularly for real wastewater, and the effects of various modifications on biomass-based adsorbents have yet to be thoroughly studied, despite the extensive research efforts devoted to their innovation. Therefore, this review provides insight into future research needed in wastewater treatment utilizing biomass-based adsorbents, as well as the possibility of commercializing biomass-based adsorbents into viable products.

Characterization of Bioadsorbents from Organic Municipal Waste.

This article describes the production of bioadsorbents coming from seven different kinds of organic waste, produced in huge quantities in households, in a two-stage process. In order to determine the influence of the process parameters of carbonization (I stage) and activation with potassium hydroxide solution (II stage), the following analysis of the physicochemical properties of each sample at each stage processing was performed: base elemental composition, structure properties, surface morphology, thermal stability, crystallinity, and transmittance spectra characteristic bands. There was a lack of research on samples after each stage of waste processing in the literature. Addressing this allowed us to evaluate the transformative potential of each kind of organic waste included in the research and select the best waste for the production of bioadsorbents commonly used in environmental protection. Moreover, the results were compared with the ones in the literature. The utilization of particular kinds of organic waste seems to be especially important taking into account the strategy of waste management and sustainable development.

Effect of Modified and Unmodified Oak Bark (Quercus Cortex) on the Cross-Linking Process and Mechanical, Anti-Aging, and Hydrophobic Properties of Biocomposites Produced from Natural Rubber (NR).

The study explores the novel use of oak bark (Quercus cortex) as a bio-filler in elastomeric composites, aligning with the global trend of plant-based biocomposites. Both modified and unmodified oak bark were investigated for their impact on the physicochemical properties of natural rubber (NR) composites. The bio-filler modified with n-octadecyltrimethoxysilane exhibited enhanced dispersion and reduced aggregates in the elastomeric matrix. NR composites containing more than 20 phr of unmodified and modified oak bark demonstrated an increased degree of cross-linking (αc > 0.21). Mechanical properties were optimal at 10-15 phr of oak bark and the sample with modified bio-filler (10 phr) achieved the highest tensile strength (15.8 MPa). Silanization and the addition of the bio-filler increased the hardness of vulcanizates. The incorporation of oak bark improved aging resistance at least two-fold due to phenolic derivatives with antioxidant properties. Hydrophobicity decreased with added bark, but silanization reversed the trend, making samples with a high content of oak bark the most hydrophobic (contact angle: 129°). Overall, oak bark shows promise as an eco-friendly, anti-aging filler in elastomeric composites, with modification enhancing compatibility and hydrophobicity.

Recycling of Industrial Waste as Soil Binding Additives-Effects on Soil Mechanical and Hydraulic Properties during Its Stabilisation before Road Construction.

To improve the in situ soil stabilization, different chemical additives are used (ion exchange compounds, additives based on H2SO4 or vinyl polymers, and organic additives using lignosulfonates). One interesting alternative is the production of additives from various waste materials. The extensive testing of waste-based blends with soil was performed; the mechanical (unconfined compressive strength (UCS)) and hydraulic (capillary rise, water absorption, and frost resistance (FR)) soil properties were measured. The optimization process led to obtaining additive compositions ensuring high strength and sealing properties: by-pass ash from the ceramics industry, waste H2SO4, pyrolytic waxes/oils from waste mixed plastics, waste tires and HDPE, and emulsion from chewing gum waste. For sandy soil, the following additives were the most promising: emulsion from pyrolytic wax (EPW) from waste PE foil (WPEF) with the addition of waste H2SO4, pyrolytic-oil emulsion from waste tires, EPW from waste mixed plastics with the addition of "by-pass" waste ash and NaOH, EPW from WPEF with the addition of NaOH, and EPW from WPEF reaching up to 93% FR, a 79.6% 7-day UCS increase, and a 27.6% of 28-day UCS increase. For clay: EPW from WPEF with the addition of NaOH, EPW from WPEF with the addition of waste H2SO4, and solely EPW from WPEF reaching up to 7.5% FR, an 80.7% 7-day UCS increase, and a 119.1% 28-day UCS increase.

Design and Preparation Technology of Green Multiple Solid Waste Cementitious Materials.

For solid waste-based cementitious materials, most scholars focus their research on the hydration reaction of cementitious materials, but there is still a lack of solid waste design that comprehensively considers mechanical properties and durability. Therefore, this article focuses on exploring the mix of design and the microscopic and macroscopic properties of multi solid waste cementitious materials (MSWCMs), namely steel slag (SS), slag powder (SP), desulfurization gypsum (DG), fly ash (FA), and ordinary Portland cement (OPC). According to the orthogonal experimental results, the compressive strength of MSWCMs is optimal when the OPC content is 50% and the SS, SP, DG, and FA contents are 10%, 20%, 5%, and 15%, respectively. The MSWCMs group with an OPC content of 50% and SS, SP, DG, and FA contents of 5%, 15%, 5%, and 25% was selected as the control group. The pure OPC group was used as the blank group, and the optimal MSWCMs ratio group had a 28-day compressive strength of 50.7 megapascals, which was 14% and 7.6% higher than the control group and blank group, respectively. The drying shrinkage rate and resistance to chloride ions were also significantly improved, with maximum increases of 22.9%, 22.6%, and 8.9%, 9.8%, respectively. According to XRD, TG-DTG, and NMR testing, the improvement in macroscopic performance can be attributed to the synergistic effect between various solid wastes. This synergistic effect produces more ettringite (AFt) and C-(A)-S-H gel. This study provides a good theoretical basis for improving the comprehensive performance of MSWCMs and is conducive to reducing the use of cement, with significant economic and environmental benefits.

Effects of Steel Slag on the Hydration Process of Solid Waste-Based Cementitious Materials.

Aiming to enhance the comprehensive utilization of steel slag (SS), a solid waste-based binder consisting of SS, granulated blast furnace slag (BFS), and desulfurization gypsum (DG) was designed and prepared. This study investigated the reaction kinetics, phase assemblages, and microstructures of the prepared solid waste-based cementitious materials with various contents of SS through hydration heat, XRD, FT-IR, SEM, TG-DSC, and MIP methods. The synergistic reaction mechanism between SS and the other two wastes (BFS and DG) is revealed. The results show that increasing SS content in the solid waste-based binder raises the pH value of the freshly prepared pastes, advances the main hydration reaction, and shortens the setting time. With the optimal SS content of 20%, the best mechanical properties are achieved, with compressive strengths of 19.2 MPa at 3 d and 58.4 MPa at 28 d, respectively. However, as the SS content continues to increase beyond 20%, the hydration process of the prepared binder is delayed. The synergistic activation effects between SS and BFS with DG enable a large amount of ettringite (AFt) formation, guaranteeing early strength development. As the reaction progresses, more reaction products CSH and Aft are precipitated. They are interlacing and overlapping, jointly refining and densifying the material's microstructure and contributing to the long-term strength gain. This study provides a reference for designing and developing solid waste-based binders and deepens the insightful understanding of the hydration mechanism of the solid waste-based binder.

Assessment of Potential Use of a Composite Based on Polyester Textile Waste as Packing Elements of a Trickle Bed Bioreactor.

Biological wastewater treatment using trickle bed reactors is a commonly known and used solution. One of the key elements of the proper operation of the trickle bed bioreactor is the appropriate selection of biofilm support elements. The respective properties of the bioreactor packing media used can influence, among other things, the efficiency of the treatment process. In this study, the possibility of polyester waste material usage for the preparation of the biofilm support elements was tested. The following properties were checked: adsorption capacity, swelling, surface morphology, microbicidal properties, as well as the possibility of their use in biological wastewater treatment. The tested elements did not adsorb copper nor showed microbicidal properties for bacterial strains Escherichia coli and Staphylococcus aureus as well as fungal strains Aspergillus niger and Chaetomium globosum. The hydrophilic and rough nature of the element surface was found to provide a friendly support for biofilm formation. The durability of the elements before and after their application in the biological treatment process was confirmed by performing tests such as compressive strength, FTIR analysis, hardness analysis and specific surface area measurement. The research confirmed the applicability of the packing elements based on polyester textile waste to the treatment of textile wastewater. The treatment efficiency of the model wastewater stream was above 90%, while in the case of a stream containing 60% actual industrial wastewater it was above 80%. The proposed solution enables the simultaneous management of textile waste and wastewater treatment, which is consistent with the principles of a circular economy. The selected waste raw material is a cheap and easily available material, and the use of the developed packing elements will reduce the amount of polyester materials ending up in landfills.

Research Enhancing Acidic Mine Wastewater Purification: Innovations in Red Mud-Loess.

This study investigates the adsorption of cadmium (Cd) by red mud-loess mixed materials and assesses the influence of quartz sand content on permeability. Shear tests are conducted using various pore solutions to analyze shear strength parameters. The research validates solidification methods for cadmium-contaminated soils and utilizes SEM-EDS, FTIR, and XRD analysis to elucidate remediation mechanisms. The findings suggest that the quartz sand content crucially affects the permeability of fine-grained red mud-loess mixtures. The optimal proportion of quartz sand is over 80%, significantly enhancing permeability, reaching a coefficient of 6.7 × 10-4 cm/s. Insufficient quartz sand content of less than 80% fails to meet the barrier permeability standards, leading to a reduced service life of the engineered barrier. Adsorption tests were conducted using various pore solutions, including distilled water, acidic solutions, and solutions containing Cd, to evaluate the adsorption capacity and shear characteristics of the red mud-loess mixture. Additionally, the study examines the behavior of Cd-loaded red mud-loess mixtures in various pore solutions, revealing strain-hardening trends and alterations in cohesiveness and internal friction angle with increasing Cd concentrations. The analysis of cement-red mud-loess-solidified soil demonstrates enhancements in soil structure and strength over time, attributed to the formation of crystalline structures and mineral formations induced by the curing agent. These findings provide valuable insights into the remediation of cadmium-contaminated soils.

Valorization of the Residual Fraction of Coal Tailings: A Mineral Circularity Strategy for the Clay Ceramic Industry in the Carboniferous Region of Santa Catarina, Southern Brazil.

Mineral extraction of coal in the carboniferous region of southern Santa Catarina (Brazil) plays a significant role in the regional economy. However, this activity has severe environmental impacts, with approximately 65% of the extracted mineral being discarded as a rejected material (deposited in landfills). The identification of the technological potential of these materials, based on the geological aspects of the extraction site and the beneficiation operations applied to obtain coal, provides the opportunity to add value to different residual fractions that can be reused. Thus, waste valorization, the main objective of this work, has recently become a strategy for the application of these minerals in the production of clay ceramics using a systematic approach named CPQvA, which means "classification, potentiality, quantity/viability, and applicability". The use of these materials as secondary mineral sources can avoid the deposition of these materials in industrial landfills and help to reduce the pressure on landfills, which receive an average of four million tons of material annually. In this study, the residual fraction, part of the tailing from coal beneficiation, known as coal fines, was evaluated for formulation valorization in clay ceramics. This residual fraction was classified as non-hazardous (class II-A, non-inert). X-ray fluorescence spectrometry, X-ray diffraction, and thermogravimetric analysis were performed to characterize the moisture content, particle-size distribution, and coal content to be used in the development of different formulations using the residual fraction of coal tailings (ranging from 0 to 40%) that are of technological interest to the sector. Processing parameters, such as firing at different temperatures (750, 800, 850, and 900 °C), were also correlated with these formulations. The results were compared with those of a reference ceramic formulation from the local productive arrangement of Morro da Fumaça (Arranjo Produtivo Local Cerâmica Vermelha de Morro da Fumaça). The various relationships between the materials were characterized in terms of their thermal shrinkage, water absorption, and mechanical resistance. Leaching and solubilization environmental tests revealed that both the industrial standard formulation and formulations with the application of the residual fraction were classified as non-hazardous materials. Thus, the method of using a mining residual fraction in the formulation of clay ceramics proved to be beneficial for the circular economy in the regional mineral sector through productive and environmental gains; the primary mineral resource and energy consumptions and the impacts related to waste generation were reduced. The results of this study can be applied to similar situations in other parts of the world.

Waste Glass Upcycling Supported by Alkali Activation: An Overview.

Alkali-activated materials are gaining much interest due to their outstanding performance, including their great resistance to chemical corrosion, good thermal characteristics, and ability to valorise industrial waste materials. Reusing waste glasses in creating alkali-activated materials appears to be a viable option for more effective solid waste utilisation and lower-cost products. However, very little research has been conducted on the suitability of waste glass as a prime precursor for alkali activation. This study examines the reuse of seven different types of waste glasses in the creation of geopolymeric and cementitious concretes as sustainable building materials, focusing in particular on how using waste glasses as the raw material in alkali-activated materials affects the durability, microstructures, hydration products, and fresh and hardened properties in comparison with using traditional raw materials. The impacts of several vital parameters, including the employment of a chemical activator, gel formation, post-fabrication curing procedures, and the distribution of source materials, are carefully considered. This review will offer insight into an in-depth understanding of the manufacturing and performance in promising applications of alkali-activated waste glass in light of future uses. The current study aims to provide a contemporary review of the chemical and structural properties of glasses and the state of research on the utilisation of waste glasses in the creation of alkali-activated materials.

Evaluating the Efficiency of Black Soldier Fly (Hermetia illucens) Larvae in Converting Mackerel Head Waste into Valuable Resources.

The seafood processing industry generates significant waste, including mackerel heads (MH), constituting 20-32% of total waste. This study explored the potential of utilizing MH as a feed source for black soldier fly larvae (BSF larvae). BSF larvae are known for their ability to efficiently convert organic materials into nutrient-rich biomass. Five concentrations of MH (0, 10, 20, 30, 40, and 50% in chicken feed) were fed to BSF larvae for eight days. After harvesting, their growth, MH conversion efficiency, nutritional content, and heavy metals reduction potential were measured. BSF larvae showed optimal growth when fed with a feed containing 20% MH, resulting in a 14.36-fold increase in weight compared to the control group, as determined by the Fisher's Least Significant Difference Test. BSF larvae maintained a survival rate of 99.33%. With the lowest feed conversion ratio (FCR) of 2.09 at 20% MH, feed efficiency was improved by up to 65.15%, and feed reduction up to 73.53%. MH enhanced lipid and protein content in BSF larvae. Furthermore, BSF larvae in this study showed higher polyunsaturated fatty acids (PUFA), including eicosapentaenoic acid (EPA) and docosahexaenoic acid (DHA), as well as other amino acids which are required for breeding animals. The current study highlights the potential of MH as a feed source for BSF larvae, improving nutritional biomass. It also suggests BSF larvae as an eco-friendly option for handling seafood processing waste and as an alternative feed source for animals.

In Vivo, In Vitro and In Silico Anticancer Activity of Ilama Leaves: An Edible and Medicinal Plant in Mexico.

Ilama leaves are an important source of secondary metabolites with promising anticancer properties. Cancer is a disease that affects a great number of people worldwide. This work aimed to investigate the in vivo, in vitro and in silico anticancer properties of three acyclic terpenoids (geranylgeraniol, phytol and farnesyl acetate) isolated from petroleum ether extract of ilama leaves. Their cytotoxic activity against U-937 cells was assessed using flow cytometry to determine the type of cell death and production of reactive oxygen species (ROS). Also, a morphological analysis of the lymph nodes and a molecular docking study using three proteins related with cancer as targets, namely, Bcl-2, Mcl-1 and VEGFR-2, were performed. The flow cytometry and histomorphological analysis revealed that geranylgeraniol, phytol and farnesyl acetate induced the death of U-937 cells by late apoptosis and necrosis. Geranylgeraniol and phytol induced a significant increase in ROS production. The molecular docking studies showed that geranylgeraniol had more affinity for Bcl-2 and VEGFR-2. In the case of farnesyl acetate, it showed the best affinity for Mcl-1. This study provides information that supports the anticancer potential of geranylgeraniol, phytol and farnesyl acetate as compounds for the treatment of cancer, particularly with the potential to treat non-Hodgkin's lymphoma.

Potential Use of Andean Tuber Waste for the Generation of Environmentally Sustainable Bioelectricity.

The growing demand for agricultural products has increased exponentially, causing their waste to increase and become a problem for society. Searching for sustainable solutions for organic waste management is increasingly urgent. This research focuses on considering the waste of an Andean tuber, such as Olluco, as a fuel source for generating electricity and becoming a potential sustainable energy source for companies dedicated to this area. This research used Olluco waste as fuel in single-chamber microbial fuel cells using carbon and zinc electrodes. An electric current and electric potential of 6.4 ± 0.4 mA and 0.99 ± 0.09 V were generated, operating with an electrical conductivity of 142.3 ± 6.1 mS/cm and a pH of 7.1 ± 0.2. It was possible to obtain a 94% decrease in COD and an internal resistance of 24.9 ± 2.8 Ω. The power density found was 373.8 ± 28.8 mW/cm2 and the current density was 4.96 A/cm2. On day 14, the cells were connected in earnest, achieving a power of 2.92 V and generating enough current to light an LED light bulb, thus demonstrating the potential that Olluco waste has to be used as fuel in microbial fuel cells.

Transforming Waste into Wealth: Advanced Carbon-Based Electrodes Derived from Refinery and Coal By-Products for Next-Generation Energy Storage.

This comprehensive review addresses the need for sustainable and efficient energy storage technologies against escalating global energy demand and environmental concerns. It explores the innovative utilization of waste materials from oil refineries and coal processing industries as precursors for carbon-based electrodes in next-generation energy storage systems, including batteries and supercapacitors. These waste-derived carbon materials, such as semi-coke, coal gasification fine ash, coal tar pitch, petroleum coke, and petroleum vacuum residue, offer a promising alternative to conventional electrode materials. They present an optimal balance of high carbon content and enhanced electrochemical properties while promoting environmental sustainability through effectively repurposing waste materials from coal and hydrocarbon industries. This review systematically examines recent advancements in fabricating and applying waste-derived carbon-based electrodes. It delves into the methodologies for converting industrial by-products into high-quality carbon electrodes, with a particular emphasis on carbonization and activation processes tailored to enhance the electrochemical performance of the derived materials. Key findings indicate that while higher carbonization temperatures may impede the development of a porous structure, using KOH as an activating agent has proven effective in developing mesoporous structures conducive to ion transport and storage. Moreover, incorporating heteroatom doping (with elements such as sulfur, potassium, and nitrogen) has shown promise in enhancing surface interactions and facilitating the diffusion process through increased availability of active sites, thereby demonstrating the potential for improved storage capabilities. The electrochemical performance of these waste-derived carbon materials is evaluated across various configurations and electrolytes. Challenges and future directions are identified, highlighting the need for a deeper understanding of the microstructural characteristics that influence electrochemical performance and advocating for interdisciplinary research to achieve precise control over material properties. This review contributes to advancing electrode material technology and promotes environmental sustainability by repurposing industrial waste into valuable resources for energy storage. It underscores the potential of waste-derived carbon materials in sustainably meeting global energy storage demands.

A 4D-Printable Photocurable Resin Derived from Waste Cooking Oil with Enhanced Tensile Strength.

In pursuit of enhancing the mechanical properties, especially the tensile strength, of 4D-printable consumables derived from waste cooking oil (WCO), we initiated the production of acrylate-modified WCO, which encompasses epoxy waste oil methacrylate (EWOMA) and epoxy waste oil acrylate (EWOA). Subsequently, a series of WCO-based 4D-printable photocurable resins were obtained by introducing a suitable diacrylate molecule as the second monomer, coupled with a composite photoinitiator system comprising Irgacure 819 and p-dimethylaminobenzaldehyde (DMAB). These materials were amenable to molding using an LCD light-curing 3D printer. Our findings underscored the pivotal role of triethylene glycol dimethacrylate (TEGDMA) among the array of diacrylate molecules in enhancing the mechanical properties of WCO-based 4D-printable resins. Notably, the 4D-printable material, composed of EWOA and TEGDMA in an equal mass ratio, exhibited nice mechanical strength comparable to that of mainstream petroleum-based 4D-printable materials, boasting a tensile strength of 9.17 MPa and an elongation at break of 15.39%. These figures significantly outperformed the mechanical characteristics of pure EWOA or TEGDMA resins. Furthermore, the EWOA-TEGDMA resin demonstrated impressive thermally induced shape memory performance, enabling deformation and recovery at room temperature and retaining its shape at -60 °C. This resin also demonstrated favorable biodegradability, with an 8.34% weight loss after 45 days of soil degradation. As a result, this 4D-printable photocurable resin derived from WCO holds immense potential for the creation of a wide spectrum of high-performance intelligent devices, brackets, mold, folding structures, and personalized products.

IV-Range Carrot Waste Flour Enhances Nutritional and Functional Properties of Rice-Based Gluten-Free Muffins.

Fortification of bakery products with plant-based functional ingredients has gained interest in recent years. Low-cost fruit and vegetable waste has been proposed to replace wheat flour, but less research has been conducted on gluten-free flours. Rice is generally accepted as a gluten-free alternative to wheat flour but is poor in bioactive constituents; thus, the addition of vegetable-based functional ingredients could improve the nutritive value of gluten-free products. In the present work, IV-range carrot waste powder (CP) was incorporated into rice-based gluten-free muffin formulations in different proportions (5, 10, 20, and 30% w/w). The impact of CP addition on physicochemical and antioxidant properties was evaluated in flour blends, doughs, and baked products. Products were also evaluated in terms of water activity, hardness, and colour before and after a one-week storage period under fridge conditions. The results showed that water and oil absorption capacities increased in flour blends with CP addition, whereas the pasting properties of flour blends were affected when adding CP. Rheological measurements revealed an increase of G' and G'' modulus values with CP addition. Colour was also significantly modified by CP addition, since CP provided an orangish and brownish colour, but also due to intensified Maillard reactions during baking. Muffin hardness was reduced in enriched formulations compared to control ones, which was attributed to the fibre being incorporated with CP. It was confirmed that CP addition improved the antioxidant properties of both flour blends and muffins, with the higher the replacement, the better the antioxidant properties. The quality of gluten-free muffins was hindered after one week stored under cold conditions, so that colour was affected, hardness increased, and the antioxidant properties diminished. In conclusion, this work presents an interesting approach for the use of carrot waste flour as a functional food ingredient to improve the nutritional value of new gluten-free rice-based muffins, thus contributing to the circularity of food systems and to the development of healthier and more sustainable diets.

Fermenting Acerola (Malpighia emarginata D.C.) and Guava (Psidium guayaba L.) Fruit Processing Co-Products with Probiotic Lactobacilli to Produce Novel Potentially Synbiotic Circular Ingredients.

This study evaluated the effects of acerola and guava fruit processing co-products fermented with probiotic Lactobacillus acidophilus LA-05 and Lacticaseibacillus paracasei L-10 on the abundance of different intestinal bacterial groups and microbial metabolic activity during 48 h of in vitro fecal fermentation. Digested fermented fruit co-products increased the relative abundance of beneficial bacterial groups while overall decreasing or maintaining the relative abundance of non-beneficial bacterial groups, suggesting selective stimulatory effects on beneficial bacterial intestinal populations. The fermented co-products stimulated microbial metabolic activity due to decreased pH, sugar consumption, short-chain fatty acid production, phenolic compound and metabolic profile alteration, and high antioxidant capacity during fecal fermentation. Acerola and guava co-products have high nutritional value and bioactive compounds whose fermentation with probiotics improves their potential functionalities. The results show that fermented fruit co-products could induce beneficial changes in the relative abundance of several bacterial groups as well as in the metabolic activity of the human intestinal microbiota. These results highlight their potential as novel and circular candidates for use as synbiotic ingredients.

From Field to Waste Valorization: A Preliminary Study Exploring the Impact of the Wine Supply Chain on the Phenolic Profile of Three Sardinian Pomace Extracts.

The winemaking process generates an annual global production of about 10 million tons of waste consisting of stalks, skin, and seeds. The possible reutilization of wine pomace is strictly linked to its chemical composition. In this preliminary study, three different Sardinian white grapes (Malvasia, Vermentino and Nasco) grown in the same area were evaluated through a whole wine production chain. To reduce environmental impact, all the grapes were treated following the integrated production practice (IPP) strategies. The adopted agronomic methods and the main physico-chemical parameters of the fresh fruits and musts were evaluated. A fully qualitative and quantitative characterization of the phenolic fraction of the pomace extracts was performed by HPLC-DAD after a post-winemaking process. Water and ethanol were utilized as green solvents in the extraction process. Additionally, the entire pomace post-winemaking process was carried out within the winery facilities to reduce energy loss and road transportation. The findings demonstrated that large amounts of beneficial polyphenols are present in pomace extracts, and that the type of grape used, agronomic practices, and winemaking method all influence the quantity and quality of the extracts. The polyphenol concentrations in the Vermentino (28,391.5 ± 7.0 mg/kg) and Malvasia pomace (11,316.3 ± 6.5 mg/kg) were found to be the highest and lowest, respectively.