From weak to strong coupling: quasi-BIC metasurfaces for mid-infrared light-matter interactions.

Thanks to their giant, yet tunable, Q-factor resonances, all-dielectric metasurfaces supporting the quasi-bound states in the continuum (q-BIC) resonances are well-suited to provide a promising platform for quantum-coherent light-matter interactions. Yet, the strong coupling regime, characterized by the hybrid light-matter states - polaritons, has not yet been fully explored in the mid-infrared regime. This paper investigates the parameter space of vibrational strong coupling (VSC) between material and metasurface cavities supporting q-BIC resonances in the mid-infrared spectral range. We outline the effects of transition dipole strength, damping rate, and the number of molecules coupled to a single cavity, as well as the cavity damping rates, to understand their respective impacts on VSC. By tuning the Q-factor of the metasurface and material parameters, a new transition light-matter coupling zone is introduced, bridging the gap between weak and strong coupling, where polaritons form but their linewidths prohibit their spectral identification. The study further identifies the effects of cavity linewidth on polariton peak separability in strongly coupled systems, highlighting that the cavities with smaller nonradiative losses and narrower linewidths facilitate better polariton separability. Moreover, we found that matching cavity and material loss, satisfying the critical strong coupling condition, enhances the coupling strength between cavity and material. Overall, these findings can guide the design of photonic cavities suited for VSC experiments, contributing to the burgeoning fields of polaritonic chemistry, light-mediated modulation of chemical reactivity, and highly sensitive molecular spectroscopy.

High-Performance Refractive Index and Temperature Sensing Based on Toroidal Dipole in All-Dielectric Metasurface.

This article shows an all-dielectric metasurface consisting of "H"-shaped silicon disks with tilted splitting gaps, which can detect the temperature and refractive index (RI). By introducing asymmetry parameters that excite the quasi-BIC, there are three distinct Fano resonances with nearly 100% modulation depth, and the maximal quality factor (Q-factor) is over 104. The predominant roles of different electromagnetic excitations in three distinct modes are demonstrated through near-field analysis and multipole decomposition. A numerical analysis of resonance response based on different refractive indices reveals a RI sensitivity of 262 nm/RIU and figure of merit (FOM) of 2183 RIU-1. This sensor can detect temperature fluctuations with a temperature sensitivity of 59.5 pm/k. The proposed metasurface provides a novel method to induce powerful TD resonances and offers possibilities for the design of high-performance sensors.

Third Harmonic Generation Enhancement and Wavefront Control Using a Local High-Q Metasurface.

High quality factor optical nanostructures provide a great opportunity to enhance nonlinear optical processes such as third harmonic generation. However, the field enhancement in these high quality factor structures is typically accompanied by optical mode nonlocality. As a result, the enhancement of nonlinear processes comes at the cost of their local control as needed for nonlinear wavefront shaping, imaging, and holography. Here we show simultaneous strong enhancement and spatial control over third harmonic generation with a local high-Q metasurface relying on higher-order Mie resonant modes. Our results demonstrate third harmonic generation at an efficiency of up to 3.25 × 10-5, high quality wavefront shaping as illustrated by a third harmonic metalens, and a flatband, angle independent, third harmonic response up to ±11° incident angle. The demonstrated high level of local control and efficient frequency conversion offer promising prospects for realizing novel nonlinear optical devices.

High-Q Quasi-Bound States in the Continuum in Terahertz All-Silicon Metasurfaces.

Bound states in the continuum (BIC)-based all-silicon metasurfaces have attracted widespread attention in recent years because of their high quality (Q) factors in terahertz (THz) frequencies. Here, we propose and experimentally demonstrate an all-silicon BIC metasurface consisting of an air-hole array on a Si substrate. BICs originated from low-order TE and TM guided mode resonances (GMRs) induced by (1,0) and (1,1) Rayleigh diffraction of metagratings, which were numerically investigated. The results indicate that the GMRs and their Q-factors are easily excited and manipulated by breaking the lattice symmetry through changes in the position or radius of the air-holes, while the resonance frequencies are less sensitive to these changes. The measured Q-factor of the GMRs is as high as 490. The high-Q metasurfaces have potential applications in THz modulators, biosensors, and other photonic devices.

Phase Interrogation Sensor Based on All-Dielectric BIC Metasurface.

The low performance of sensors based on an all-dielectric metasurface limits their application compared to metallic counterparts. Here, for the first time, an all-dielectric BIC (bound states in the continuum) metasurface is employed for highly sensitive phase interrogation refractive index sensing. The proposed sensor is well analyzed, fabricated, and characterized. Experimentally, a high-performance BIC-based microfluidic sensing chip with a Q factor of 1200 is achieved by introducing symmetry breaking. A refractive index sensor with high figure of merit of 418 RIU-1 is demonstrated, which is beneficial to the phase interrogation. Notably, we measure a record phase interrogation sensitivity of 2.7 × 104 deg/RIU to the refractive index, thus enabling the all-dielectric BIC to rival the refractive index detection capabilities of metal-based sensors such as surface plasmon resonance. This scheme establishes a pivotal role of the all-dielectric metasurface in the field of ultrahigh sensitivity sensors and opens possibilities for trace detection in biochemical analysis and environment monitoring.

Metasurface Biosensors Enabling Single-Molecule Sensing of Cell-Free DNA.

In this study, we have revealed that highly fluorescence (FL)-enhancing all-dielectric metasurface biosensors are capable of detecting single-target DNA, which is cell-free DNA (cfDNA) specific to the human practice effect. The ultimately high-precision detection was achieved in a scheme combining the metasurface biosensors with a short-time nucleic acid amplification technique, that is, a reduced-cycle polymerase chain reaction (PCR). In this combined scheme, we obtained a series of FL signals at a single-molecule concentration, reflecting the Poisson distribution, and moreover elucidated that the FL signals exhibit the single-molecule cfDNA detection with more than 84% statistical confidence in an automated FL detection system and with 99.9% statistical confidence in confocal FL microscopy. As a result, we have found a simple and practical test to discriminate the target of 1 copy/test from zero using metasurface biosensors, which has not been realized by other elaborate techniques such as digital PCR.

Color Printing and Encryption with Polarization-Switchable Structural Colors on All-Dielectric Metasurfaces.

Metasurface-based structural color with high resolution is promising for color printing and encryption. However, achieving tunable structural colors in practical applications is challenging owing to the immutability after the fabrication of metasurfaces. Herein, we proposed the polarization-switchable dielectric metasurfaces with full colors. The colorful images can be switched on/off by controlling the polarization of incident light. For the nanorods metasurfaces, all colors turned to black in the "off" mode because of the near-zero reflection, and the uniform black was advantageous for designing encryption applications. For the nanocrosses metasurfaces, colors reversed in two different "on" modes and images hidden in the "off" mode. With the polarization-sensitive metasurfaces, a fish-bird image, an overlapped dual-channel image, and a green-red heart image were obtained, respectively. The demonstrations can be applied to dynamic displays, optical cryptography, multichannel imaging, and optical data storage.

Asymmetric Cross Metasurfaces with Multiple Resonances Governed by Bound States in the Continuum.

The bound state in the continuum (BIC) has paved a new way to achieve excellent localization of the resonant mode coexisting with a continuous spectrum in the metasurface. Here, we propose an all-dielectric metasurface consisting of periodic pairs of asymmetric crosses that supports multiple Fano resonances. Due to the sufficient degrees of freedom in the unit cell, we displaced the vertical bars horizontally to introduce in-plane perturbation, doubling the unit cell structure. Dimerization directly resulted in the folding of the Brillouin zone in k space and transformed the BIC modes into quasi-BIC resonances. Then, simultaneous in-plane symmetry breaking was introduced in both the x and y directions to excite two more resonances. The physical mechanisms of these BIC modes were investigated by multipole decomposition of the scattering cross section and electromagnetic near-field analysis, confirming that they are governed by toroidal dipole (TD) modes and magnetic dipole (MD) modes. We also investigated the flexible tunability and evaluated the sensing performance of our proposed metasurface. Our work is promising for different applications requiring stable and tunable resonances, such as optical switching and biomolecule sensing.

High-Sensitivity Sensing in All-Dielectric Metasurface Driven by Quasi-Bound States in the Continuum.

Quasi-bound states in the continuum (quasi-BIC) in all-dielectric metasurfaces provide a crucial platform for sensing due to its ability to enhance strong matter interactions between light-waves and analytes. In this study, a novel high-sensitivity all-dielectric sensor composed of a periodic array of silicon (Si) plates with square nanoholes in the continuous near-infrared band is theoretically proposed. By adjusting the position of the square nanohole, the symmetry-protected BIC and Friedrich-Wintgen BIC (FW-BIC) can be excited. The torodial dipole (TD) and electric quadruple (EQ) are demonstrated to play a dominating role in the resonant modes by near-field analysis and multipole decomposition. The results show that the sensitivity, the Q-factor, and the corresponding figure of merit (FOM) can simultaneously reach 399 nm/RIU (RIU is refractive index unit), 4959, and 1281, respectively. Compared with other complex nanostructures, the proposed metasurface is more feasible and practical, which may open up an avenue for the development of ultrasensitive sensors.

Two-Way Detection of COVID-19 Spike Protein and Antibody Using All-Dielectric Metasurface Fluorescence Sensors.

COVID-19 (or SARS-CoV-2) has deeply affected human beings worldwide for over two years, and its flexible mutations indicate the unlikeliness of its termination in a short time. Therefore, it is important to develop a quantitative platform for direct COVID-19 detection and human status monitoring. Such a platform should be simpler than nucleic acid amplification techniques such as polymerase chain reaction, and more reliable than the disposable test kits that are based on immunochromatography. To fulfill these requirements, we conducted proof-of-concept experiments for the quantitative detection of spike glycoprotein peptides and antibodies in one platform, i.e., all-dielectric metasurface fluorescence (FL) sensors. The high capability to enhance FL intensity enabled us to quantitatively measure the glycoproteins and antibodies more efficiently compared with the previous methods reported to date. Furthermore, the intrinsic limit of detection in the metasurface FL sensors was examined via confocal microscopy and found to be less than 0.64 pg/mL for glycoprotein peptides. Moreover, the sensors had a dynamic range more than five orders that of the target concentrations, indicating extremely high sensitivity. These two-way functions of the metasurface FL sensors can be helpful in reducing daily loads in clinics and in providing quantitative test values for proper diagnosis and cures.

Engineering Electromagnetic Field Distribution and Resonance Quality Factor Using Slotted Quasi-BIC Metasurfaces.

Dielectric metasurfaces governed by bound states in the continuum (BIC) are actively investigated for achieving high-quality factors and strong electromagnetic field enhancements. Traditional approaches reported for tuning the performance of quasi-BIC metasurfaces include tuning the resonator size, period, and structure symmetry. Here we propose and experimentally demonstrate an alternative approach through engineering slots within a zigzag array of elliptical silicon resonators. Through analytical theory, three-dimensional electromagnetic modeling, and infrared spectroscopy, we systematically investigate the spectral responses and field distributions of the slotted metasurface in the mid-IR. Our results show that by introducing slots, the electric field intensity enhancement near the apex and the quality factor of the quasi-BIC resonance are increased by a factor of 2.1 and 3.3, respectively, in comparison to the metasurface without slots. Furthermore, the slotted metasurface also provides extra regions of electromagnetic enhancement and confinement, which holds enormous potential in particle trapping, sensing, and emission enhancement.

Generation and Superposition of Perfect Vortex Beams in Terahertz Region via Single-Layer All-Dielectric Metasurface.

Terahertz (THz) orbital angular momentum (OAM) technology provides promising applications in future wireless communication with large bandwidth and high capacity. However, the ring radius of the conventional THz vortex beam is related to the topological charge, limiting the co-propagation of multiple OAM modes in the THz communication systems. Although the perfect vortex beam (PVB) based on traditional methods can solve this problem, they are usually bulky and unstable. Here, we demonstrate two PVB generators based on a single all-dielectric metasurface to obtain polarization-independent PVB and spin multiplexed PVB, respectively. The former regulates the propagation phase by using isotropic unit cells; the latter simultaneously manipulates the propagation and geometric phase to achieve the spin-decoupled phase control by arranging anisotropic unit cells. In addition, we also demonstrate the stable generation of a perfect Poincaré beam with arbitrary polarization and phase distribution on a hybrid-order Poincaré Sphere via a spin-decoupled metasurface, which is achieved by the linear superposition of two PVBs with orthogonal circular polarizations. The proposed scheme provides a compact and efficient platform for the generation and superposition of PVBs in THz region, and will speed up the progress of THz communication systems, complex light field generation, and quantum information sciences.

Theoretical Study on Generation of Multidimensional Focused and Vector Vortex Beams via All-Dielectric Spin-Multiplexed Metasurface.

The optical vortex (OV) beams characterized by orbital angular momentum (OAM) possess ubiquitous applications in optical communication and nanoparticle manipulation. Particularly, the vortex vector beams are important in classical physics and quantum sciences. Here, based on an all-dielectric transmission metasurface platform, we demonstrate a spin-multiplexed metadevice combining propagation phase and Pancharatnam-Berry (PB) phase. By utilizing a phase-only modulation method, the metadevice can generate spin-dependent and multidimensional focused optical vortex (FOV) under the orthogonally circularly polarized incident light, and it can successfully realize the multiplexed of the above-mentioned FOVs for linearly polarized light. Meanwhile, the superposition of multiple OAM states can also produce vector vortex beams with different modes. Additionally, the evolution process of the electric field intensity profile is presented after the resultant vector vortex beams through a horizontal linear polarization. This work paves an innovative way for generating structured beams, and it provides promising opportunities for advanced applications in optical data storage, optical micromanipulation, and data communication.

Recent Development in Metasurfaces: A Focus on Sensing Applications.

One of the fastest-expanding study areas in optics over the past decade has been metasurfaces (MSs). These subwavelength meta-atom-based ultrathin arrays have been developed for a broad range of functions, including lenses, polarization control, holography, coloring, spectroscopy, sensors, and many more. They allow exact control of the many properties of electromagnetic waves. The performance of MSs has dramatically improved because of recent developments in nanofabrication methods, and this concept has developed to the point that it may be used in commercial applications. In this review, a vital topic of sensing has been considered and an up-to-date study has been carried out. Three different kinds of MS absorber sensor formations, all-dielectric, all-metallic, and hybrid configurations, are presented for biochemical sensing applications. We believe that this review paper will provide current knowledge on state-of-the-art sensing devices based on MSs.

Tailoring Third-Harmonic Diffraction Efficiency by Hybrid Modes in High-Q Metasurfaces.

Metasurfaces are versatile tools for manipulating light; however, they have received little attention as devices for the efficient control of nonlinearly diffracted light. Here, we demonstrate nonlinear wavefront control through third-harmonic generation (THG) beaming into diffraction orders with efficiency tuned by excitation of hybrid Mie-quasi-bound states in the continuum (BIC) modes in a silicon metasurface. Simultaneous excitation of the high-Q collective Mie-type modes and quasi-BIC modes leads to their hybridization and results in a local electric field redistribution. We probe the hybrid mode by measuring far-field patterns of THG and observe the strong switching between (0,-1) and (-1,0) THG diffraction orders from 1:6 for off-resonant excitation to 129:1 for the hybrid mode excitation, showing tremendous contrast in controlling the nonlinear diffraction patterns. Our results pave the way to the realization of metasurfaces for novel light sources, telecommunications, and quantum photonics.

Simultaneous Measurements of Refractive Index and Methane Concentration through Electromagnetic Fano Resonance Coupling in All-Dielectric Metasurface.

Dual-parameter measurements of refractive index and methane concentration based on electromagnetic Fano resonance are proposed. Two independent Fano resonances can be produced through electric dipole and toroidal dipole resonance in an all-dielectric metasurface separately. The linear relationship between the spectral peak-shifts and the parameters to be measured will be obtained directly. The refractive index (RI) sensitivity and gas sensitivity are 1305.6 nm/refractive index unit (RIU), -0.295 nm/% for one resonance peak (dip1), and 456.6 nm/RIU, -0.61 nm/% for another resonance peak (dip2). Such a metasurface has simpler structure and higher sensitivity, which is beneficial for environmental gas monitoring or multi-parameter measurements.

Nearly Perfect Transmissive Subtractive Coloration through the Spectral Amplification of Mie Scattering and Lattice Resonance.

Silicon has been utilized in metasurfaces to produce structural color filters due to its compatibility with mature and cost-effective methods for complementary metal oxide semiconductor devices. In this work, we propose and demonstrate efficiency- and scattering-enhanced structural color filters using all-dielectric metasurfaces made up of engineered hydrogenated amorphous silicon (a-Si:H) nanoblocks. Wavelength-dependent filtering is achieved by Mie scattering as each structure individually supports the electric dipole (ED) and magnetic dipole (MD) resonances. The ED and MD resonances are identified by observing the field profiles of the resonance calculated by finite element method (FEM) simulations. To enhance the efficiency and scattering response of the all-dielectric metasurfaces, the proposed structural color filters are designed with consideration of the lattice resonances and scattering directivity. The spectral positions of the transmission dips and peaks are rigorously analyzed in accordance with the Mie theory and multipole expansion. The transmission spectra exhibit 100% transmission where Kerker's first condition is satisfied, while the lattice resonances amplify the ED and MD scattering responses throughout the entire visible regime. Various colors are generated by varying the resonance peak, which is controlled by varying the geometric parameters of a-Si:H nanoblocks. The proposed structural color printing devices are expected to have applications in dynamic color displays, imaging devices, and photorealistic color printing.

Polarization-Dependent All-Dielectric Metasurface for Single-Shot Quantitative Phase Imaging.

Phase retrieval is a noninterferometric quantitative phase imaging technique that has become an essential tool in optical metrology and label-free microscopy. Phase retrieval techniques require multiple intensity measurements traditionally recorded by camera or sample translation, which limits their applicability mostly to static objects. In this work, we propose the use of a single polarization-dependent all-dielectric metasurface to facilitate the simultaneous recording of two images, which are utilized in phase calculation based on the transport-of-intensity equation. The metasurface acts as a multifunctional device that splits two orthogonal polarization components and adds a propagation phase shift onto one of them. As a proof-of-principle, we demonstrate the technique in the wavefront sensing of technical samples using a standard imaging setup. Our metasurface-based approach fosters a fast and compact configuration that can be integrated into commercial imaging systems.

High-Sensitivity High-Throughput Detection of Nucleic Acid Targets on Metasurface Fluorescence Biosensors.

Worldwide infection disease due to SARS-CoV-2 is tremendously affecting our daily lives. High-throughput detection methods for nucleic acids are emergently desired. Here, we show high-sensitivity and high-throughput metasurface fluorescence biosensors that are applicable for nucleic acid targets. The all-dielectric metasurface biosensors comprise silicon-on-insulator nanorod array and have prominent electromagnetic resonances enhancing fluorescence emission. For proof-of-concept experiment on the metasurface biosensors, we have conducted fluorescence detection of single-strand oligoDNAs, which model the partial sequences of SARS-CoV-2 RNA indicated by national infection institutes, and succeeded in the high-throughput detection at low concentrations on the order of 100 amol/mL without any amplification technique. As a direct detection method, the metasurface fluorescence biosensors exhibit high performance.

Dual non-diffractive terahertz beam generators based on all-dielectric metasurface.

The applications of terahertz (THz) technology can be greatly extended using non-diffractive beams with unique field distributions and non-diffractive transmission characteristics. Here, we design and experimentally demonstrate a set of dual non-diffractive THz beam generators based on an all-dielectric metasurface. Two kinds of non-diffractive beams with dramatically opposite focusing properties, Bessel beam and abruptly autofocusing (AAF) beam, are considered. A Bessel beam with long-distance non-diffractive characteristics and an AAF beam with low energy during transmission and abruptly increased energy near the focus are generated for x- and y-polarized incident waves, respectively. These two kinds of beams are characterized and the results agree well with simulations. In addition, we show numerically that these two kinds of beams can also carry orbital angular momentum by further imposing proper angular phases in the design. We believe that these metasurface-based beam generators have great potential use in THz imaging, communications, non-destructive evaluation, and many other fields.