Three-Dimensional Anthropometric Analysis of the Effect of Lip Reconstructive Surgery on Children with Cleft Lip and Palate at Three Different Times.

OBJECTIVES: This investigation aimed to assess the optimal timing for lip repair in children with cleft lip and palate via 3D anthropometric analysis to evaluate their maxillofacial structures. METHODS: The sample comprised 252 digitized dental models, divided into groups according to the following timing of lip repair: G1 (n = 50): 3 months; G2 (n = 50): 5 and 6 months; G3 (n = 26): 8 and 10 months. Models were evaluated at two-time points: T1: before lip repair; T2: at 5 years of age. Linear measurements, area, and Atack index were analyzed. RESULTS: At T1, the intergroup analysis revealed that G1 had statistically significant lower means of I-C', I-C, C-C', and the sum of the segment areas compared to G2 (p = 0.0140, p = 0.0082, p = 0.0004, p < 0.0001, respectively). In addition, there was a statistically significant difference when comparing the cleft area between G2 and G3 (p = 0.0346). At T2, the intergroup analysis revealed that G1 presented a statistically significant mean I-C' compared to G3 (p = 0.0461). In the I-CC' length analysis, G1 and G3 showed higher means when compared to G2 (p = 0.0039). The I-T' measurement was statistically higher in G1 than in G2 (p = 0.0251). In the intergroup growth rate analysis, G1 and G2 showed statistically significant differences in the I-C' measurement compared to G3 (p = 0.0003). In the analysis of the Atack index, there was a statistically significant difference between G1 and the other sample sets (p < 0.0001). CONCLUSION: Children who underwent surgery later showed better results in terms of the growth and development of the dental arches.

Association between shortened dental configurations and health outcomes: a scoping review.

This study mapped definitions of shortened dental configurations and health outcomes employed in association studies. A scoping review was conducted using the PubMed/Medline, Scopus, Web of Science, SciELO and Cochrane databases. Two trained researchers selected studies and extracted data. Studies that investigated the association between shortened dental configurations (exposure) and person-centered outcomes (general and oral health) related to health behavior (dietary patterns). Clinical outcomes were classified according to the International Classification of Functioning, Disability and Health and the International Classification of Diseases of the World Health Organization (WHO). Shortened dental configurations were defined as at least 20/21 teeth or the position of the teeth, including esthetics, dental occlusion and periodontal status (Eichner Index, Shortened Dental Arches, Functional Dentition Classification System, Posterior Occluding Pairs, Functional Tooth Units). The initial search resulted in 12,525 records in English, Portuguese and Spanish, 432 of which addressed the association of interest. General health (n = 203) and oral health (n = 201) were addressed in a similar number of studies. Most outcomes were related to general health (n = 184), the most frequent of which were endocrine, nutritional or metabolic diseases (n = 57) and mental functions (n = 26). Person-centered measures were addressed in 153 studies, most of which were about oral health and oral health-related quality of life (n = 62). Oral health outcomes were predominantly related to intake functions (n = 44) and diseases or disorders of the orofacial complex (n = 24). Dietary patterns (n = 43) and mortality (n = 38) were also studied. The cross-sectional design (n = 257) and non-probabilistic sampling (n = 218) were more frequent. The shortened dental configurations defined by the WHO were the most frequent in the studies (n = 206). The effects of shortened dental configurations have been investigated mainly in relation to endocrine, nutritional or metabolic diseases and measures of oral health-related quality of life. The findings point to a diversity of health outcomes assessed and substantial methodological variability.

Three-dimensional analysis of posterior tooth inclinations in transverse and sagittal relationships: A cross-sectional study.

OBJECTIVE: To compare tooth inclinations in different sagittal skeletal patterns and transverse maxillary relationships three-dimensionally. METHODS: A cross-sectional study carried out with 132 three-dimensional digital models in the complete permanent dentition divided into six groups (n=22); three groups with maxillary atresia: G1- skeletal class I, G2- skeletal class II and G3-skeletal class III; three groups without maxillary atresia: G4- skeletal class I; G5- skeletal class II and G6- skeletal class III. The comparison between the skeletal pattern was performed by the non-parametric tests of Kruskal Wallis and Dunn and between the groups by the non-parametric test of Mann Whitney. RESULTS: Subjects with skeletal class II and maxillary atresia had a greater lingual inclination of the maxillary teeth than those with class I and III; Subjects with skeletal class II without atresia had a less lingual inclination of the mandibular molars than the other classes (p<0.05). The maxillary premolars showed no variation in dental inclination with atresia, independent of the skeletal class in G1, G2, and G3 (p>0.05). The mandibular premolars showed that the groups without atresia G4, G5, and G6 presented no significant difference (p>0.05). Lower premolars in skeletal class III malocclusion individuals with atresia had a more negative inclination than the others. CONCLUSION: There is a difference in the inclination of posterior teeth between individuals with and without maxillary atresia and skeletal classes I, II, and III.

Patrón de variación de la forma del arco dentario mandibular en una muestra de la Región Metropolitana de Chile

Objetivos: Describir el patrón de variación de la forma de la arcada dentaria mandibular en una muestra de la Región Metropolitana mediante un estudio observacional, transversal. Métodos: Se digitalizaron 18 puntos de referencia en 134 fotografías estandarizadas de modelos de yeso y se realizó un análisis de Procusto para obtener los componentes de variación de la forma y el tamaño (tamaño del centroide= cs). Resultados: El tamaño de centroide en hombres es significativamente mayor que en mujeres. El análisis discriminante con validación cruzada no mostró diferencias significativas en los componentes de la forma según el sexo. Las diferencias en la forma de los arcos dentales, explicada por los dos primeros componentes de la forma correspondió al 73.4% de la varianza total (PC1= 50,14%, en el eje anteroposterior y PC2= 13,31% en el eje transversal). Conclusiones: De acuerdo con los resultados del presente estudio, se debe replantear el uso de plantillas preformadas en la determinación de la forma del arco dentario, dada la continuidad morfológica que se observa al realizar un análisis estadístico del patrón de variación en forma y tamaño del arco, como queda en evidencia al utilizar herramientas de morfometría geométrica.

Objetivos : Descrever o padrão de variação da forma do arco dentário mandibular em uma amostra populacional da Região Metropolitana, através de um estudo observacional transversal. Métodos : 18 pontos anatómicos em 134 fotografias padronizadas de moldes de gesso foram digitalizados e foi realizado uma análise Procrustes. Resultados : O tamanho do centróide nos homens é significativamente maior do que nas mulheres. A análise discriminante com validação cruzada de gênero não mostrou diferenças significativas nos componentes da forma. O padrão de variação na forma das arcadas dentárias é explicado principalmente por PC1 (50,1% da variação total, variação anteroposterior) e PC2 (13,3%, variação transversal). Conclusões : Dada a continuidade morfológica que se observa ao realizar uma análise estatística do padrão de variação da forma e tamanho da arcada, aplicando ferramentas morfométricas geométricas, o uso de templates pré-formados para determinação da forma da arcada dentária deve ser reconsiderado.

Objectives: Describe the pattern of shape variation of the mandibular dental arch in a sample from the Metropolitan Region through an observational, cross-sectional study. Methods: 18 landmarks on 134 standardized photographs of dental casts were digitized, and a Procrustes analysis was performed. Results: The size of the centroid in men was significantly larger than in women. Discriminant analysis with gender cross-validation did not show significant differences in the shape components. The variation pattern in the shape of the dental arches is mainly explained by PC1 (50.1% of the total variation, anteroposterior variation) and PC2 (13.3%, transverse variation). Conclusions: Given the morphological continuity that is observed when performing a statistical analysis of the variation pattern in shape and size of the arch applying geometric morphometric tools, the use of preformed templates for determining the shape of the dental arch should be reconsidered.

Changes in the arch width and buccal corridor after fixed orthodontic treatment with Damon self-ligating system: premolar extraction vs. non-extraction

ABSTRACT Introduction: Extraction vs. non-extraction is a crucial decision in orthodontic therapy. Objective: The aim of the present study was to investigate the changes in the dental arch width and buccal corridor after orthodontic treatment using extraction and non-extraction therapy with Damon self-ligating system. Material and Methods: This retrospective study consisted of 35 patients (20 female and 15 male patients with median age of 12.5 years), treated by extracting 4 or 2 premolars, and 37 patients (16 female and 21 male patients with the median age of 12.8 years), treated without premolar extraction. Both groups were treated with Damon self-ligating system. Plaster models before (T0) and after (T1) treatment were measured, and the arch width values were determined at the level of the first molars, second premolars, canines and palatal rugae. Buccal corridor width was measured using the extraoral images at T0 and T1. Paired t-test was used for the analysis of the normally distributed data, and Wilcoxon Mann-Whitney U test was used for the data with non-normal distribution. Values of p<0.05 were set as statistically significant. Results: The upper intercanine width increased significantly in both groups (p<0.01). In the non-extraction group, the arch width increased significantly in the maxillary second premolar and first molar region (p<0.01) as well as in the region of the canines (p=0.04), second premolars (p=0.01) and first molars (p<0.01) of the mandible. The buccal corridor decreased significantly in the non-extraction group (p<0.01). Conclusion: Premolar extraction in combination with Damon self-ligating system did not lead to reduction of the dental arch width in the maxilla, nor did it increase the size of the buccal corridors.

RESUMO Introdução: Extrair ou não extrair dentes é uma decisão crucial no tratamento ortodôntico. Objetivo: O objetivo do presente estudo foi investigar as alterações na largura da arcada dentária e no corredor bucal após o tratamento ortodôntico com extração e o tratamento sem extração com o sistema autoligável Damon. Material e Métodos: Esse estudo retrospectivo consistiu de 35 pacientes (20 do sexo feminino e 15 do sexo masculino, com idade média de 12,5 anos), tratados com extração de 4 ou 2 pré-molares; e 37 pacientes (16 do sexo feminino e 21 do sexo masculino, com idade média de 12,8 anos), tratados sem extração de pré-molares. Ambos os grupos foram tratados com o sistema autoligável Damon. Os modelos de gesso antes (T0) e depois (T1) do tratamento foram medidos, e os valores de largura da arcada foram determinados ao nível dos primeiros molares, segundos pré-molares, caninos e rugas palatinas. A largura do corredor bucal foi medida usando as imagens extrabucais em T0 e T1. O teste t pareado foi usado para a análise dos dados com distribuição normal, e o teste U de Wilcoxon Mann-Whitney foi usado para os dados com distribuição não normal. Valores de p < 0,05 foram considerados estatisticamente significativos. Resultados: A distância intercaninos superiores aumentou significativamente em ambos os grupos (p<0,01). No grupo sem extração, a largura da arcada aumentou significativamente na região dos segundos pré-molares e primeiros molares superiores (p<0,01), bem como na região dos caninos (p=0,04), segundos pré-molares (p=0,01) e primeiros molares (p<0,01) inferiores. O corredor bucal diminuiu significativamente no grupo sem extração (p<0,01). Conclusão: A extração de pré-molares em combinação com o sistema autoligável Damon não levou à redução na largura da arcada dentária superior, nem aumentou o tamanho dos corredores bucais.

Relación entre la compresión maxilar y potencial impactación del canino superior: Scoping review / Relationship between the maxillary transverse dimension and impacted canines: Scoping review

El canino maxilar permanente corresponde al segundo diente más frecuentemente impactado en el arco dental. La etiología de esta patología aún no está totalmente definida, sin embargo, investigadores plantean la deficiencia del ancho del hueso maxilar como una posible causa. Objetivo: Investigar la evidencia que asocia menores dimensiones transversales del maxilar a la ocurrencia de la impactación de caninos superiores y esclarecer la posible relación. Materiales y métodos: Se realizó una revisión sistemática exploratoria a partir de una búsqueda amplia de la literatura en bases de datos PubMed, Cochrane, EBSCO y Multibuscador UNAB. Los artículos fueron recopilados, identificados y filtrados según el diagrama de flujo de declaración PRISMA. Resultados: La búsqueda identificó 755 estudios, de los cuales 14 fueron incluidos. Los estudios varían en diseño, edad de estudio y métodos de diagnóstico. La mitad de los estudios reporta una asociación positiva entre compresión maxilar e impactación canina superior, mientras que la otra mitad una asociación negativa. Conclusiones: No hay evidencia suficiente para poder asociar compresión maxilar con impactación de caninos superiores. Estudios con métodos de diagnóstico rigurosos son necesarios para una mejor comprensión. No obstante, se enfatiza la importancia de un diagnóstico precoz, para garantizar mejores resultados y pronóstico más favorable.

The permanent maxillary canine is the second most frequently impacted tooth in the dental arch. The etiology of this disease is not completely defined, yet some researchers propose the deficiency of the width from the maxilla as a possible cause. Objective: To investigate available evidence correlating smaller transverse maxilla dimensions with the occurrence of potential impaction of upper canines and clarify the possible relation. Materials and methods: A systematic exploratory review was carried out based on comprehensive search of the literature in databases such as PubMed, Cochrane, EBSCO and UNAB multi search engine. The articles were compiled, identified and filtered systematically according to the PRISMA flow diagram. Results: Our search identified 755 studies, 14 of which were included. These studies vary in design, patients age, and methods for detection. Half of the studies show a positive correlation between maxillary compression and potential upper canine impaction, whereas the other half show a negative correlation. Conclusions: There is not enough evidence to link maxillary compression to upper canine impaction. Studies with rigorous diagnostic methods for detection are necessary for a better understanding of this relation. Nonetheless, the importance of early diagnosis must be emphasized to guarantee better results and a more favorable prognosis.

Accuracy of models of partially edentulous arches obtained by three-dimensional printing: An in vitro study.

Aim: The aim of this study was to evaluate the accuracy of models of partially edentulous arches obtained by three-dimensional (3D) printing. Settings and Design: This was an in vitro study. Materials and Methods: Fifteen partially edentulous models were evaluated, using two methods of measuring dimensions: virtual, using the Standard Tessellation Language files of the models and software (control group), and physical, through printing the models and digital caliper (test group). For both methods, measurements were made regarding the dimensions of the teeth (width and length - buccal/lingual or palatal/occlusal) and distances between the teeth. Statistical Analysis Used: For the variable of linear measurements (width and length) and distances between teeth of the same hemiarch, the Wilcoxon test was used, while for the variable between opposite hemiarches, the paired t-test was used. Results: In the evaluation of the linear measurements, a significant difference was observed only when the width of the molar tooth was analyzed (P = 0.014). When the buccal length was measured, all teeth had linear measurements provided by the virtual method that was lower than the physical (P = 0.000), as well as the lingual/palatal length in incisors (P = 0.003) and molars (P = 0.009) and in total (P = 0.001). As for the analyses between teeth, no difference was identified between the measurements provided by the virtual method compared to the physical one. Conclusions: The 3D printer used to print partially edentulous models provided linear distortions in the teeth but without changes in the distances between teeth of the same hemiarch and between teeth of opposite hemiarches.

Osteonecrose dos maxilares relacionada ao uso demedicamentos: características patológicas, diagnóstico,prevenção e estratégias terapêuticas / Medication-related osteonecrosis of the jaws: pathological characteristics, diagnosis, prevention and therapeutic strategies

Objetivo: Este trabalho tem como propósito fornecer uma análise abrangente das características clínicas, etiológicas, radiográficas e histopatológicas da osteonecrose dos maxilares relacionada ao uso de medicamentos, além de abordar os métodos de diagnóstico, prevenção e estratégias terapêuticas. Materiais e métodos: foi realizada uma busca por artigos científicos publicados no período de 2015 a 2023, utilizando as bases de dados Scientific Electronic Library Online (SciELO), US National Library of Medicine (PubMed) e ScienceDirect. Conclusão: Embora infrequente, há um considerável potencial de ocorrência de osteonecrose dos maxilares em pacientes submetidos a terapia prolongada com medicamentos antirreabsortivos e antiangiogênicos, especialmente quando não são adotadas medidas preventivas adequadas. A implementação de práticas preventivas, a vigilância das condições bucais e a colaboração de uma equipe multidisciplinar são fundamentais para reduzir os riscos associados a essa condição patológica.(AU)

Objective: This work aims to provide a comprehensive analysis of the clinical, etiological, radiographic and histopathological characteristics of Medication-Related Jaw Osteonecrosis, in addition to addressing diagnostic methods, prevention and therapeutic strategies. Materials and methods: A search was carried out for scientific articles published between 2015 and 2023, using the Scientific Electronic Library Online (SciELO), US National Library of Medicine (PubMed) and ScienceDirect databases. Conclusion: Although infrequent, there is a considerable potential for osteonecrosis of the jaw to occur in patients undergoing prolonged therapy with antiresorptive and antiangiogenic medications, especially when adequate preventive measures are not adopted. The implementation of preventive practices, surveillance of oral conditions and the collaboration of a multidisciplinary team are essential to reduce the risks associated with this pathological condition.(AU)

Arch Symmetry in Patients Without and With Cleft Lip and Palate After Orthodontic/Rehabilitative Treatment-A Stereophotogrammetry Study.

To evaluate and compare the dental arch symmetry of individuals with and without cleft lip and palate after orthodontic/rehabilitation treatment.Cross-sectional study.Tertiary cleft center in Brazil.Fifty-five participants aged between 18 and 30 years were divided into 3 groups according to treatment. Patients that received either a fixed partial denture (FPD) or implant-supported crown (ISC) in the cleft area or only orthodontic treatment, noncleft patients (NC).An analysis was performed using digitized dental casts scanned by laser and software. The following linear measurements were evaluated: incisor-canine; canine-molar; incisor-molar; surface and volume of the palatal region.Three-way ANOVA was used to compare the study factors: group (FPD/ISC/NC) and side (right/left) followed by the Tukey test to verify their interaction (α = .05).The results showed statistically significant differences among groups for the maxillary linear measurements canine-molar and incisor-molar, but not for incisor-canine. No statistically significant differences were found regarding the side for the maxillary measurements, while the factor interaction showed similarity only for incisor-canine. The mandibular measurements showed no statistical differences among groups, sides, or factor interactions. In surface and volume, all values in patients with cleft presented lesser than in without cleft patients.Regardless of the rehabilitation, arch symmetry can be achieved in the incisor-canine dimension in the cleft area.

Comparative 3D study of dental arches in children with microcephaly associated with congenital Zika syndrome, orofacial cleft, and without craniofacial anomalies.

INTRODUCTION: The dentist participates in the treatment protocol for craniofacial anomalies in individuals from the first months of life. OBJECTIVE: to compare in a retrospective cohort study the morphometry of the edentulous palate of children microcephaly associated with congenital Zika syndrome (CZS), unilateral complete cleft lip and alveolus (UCL), and without craniofacial anomalies. METHODS: Forty-five digitized dental molds composed the sample divided into three groups: CZS; UCL; and without craniofacial anomalies (control group). The following measurements were evaluated: intercanine and intertuberosity distances; dental arch length, area, volume, and mismatch superimposition. Parametric and non-parametric tests were applied (α = 5%). RESULTS: CZS group showed the smallest means of intercanine distance and area than those of the other groups (p = .001 and p = .010, respectively). The dental arch length was greater in the CZS group than in the control group (p = .020). The evaluation of the mismatch superimposition showed that the CZS group had the lowest means of maximum distance and root mean square than that of the UCL group (p = .025 and p = .005, respectively). CONCLUSION: CZS participants tended to palatal narrowing, while UCL individuals had parameters similar to those of the control group, despite the alveolus defect.

[Facial biotype in relation to the shape of the upper dental arch of individuals from the city of corrientes. a cross-sectional study]. / Biotipo facial en relación a la forma del arco dentario superior de individuos de la ciudad de corrientes. un estudio transversal.

This research sought to define a facial anthropometric pattern that characterizes individuals from the City of Corrientes. Objectives: Obtain the facial morphometry of individuals of both sexes and determine its prevalence. To determine the most frequent types of maxillary arches in the sample. To analyze the facial variation through the morphometric index in relation to the shape of the maxillary arch. Materials and methods: This study was observational, descriptive, and cross-sectional. The facial morphometric modification was analyzed in relation to the shape of the upper dental arch, which was presented by a group of 50 patients of both sexes, born in the city of Corrientes, Argentina with an age range between 18 to 40 years, who voluntarily attended for his attention to the FOUNNE University Dental Hospital and the Rossi Candia SAPS dependent on the Municipality of the City of Corrientes. To establish the Facial Morphological Index (FMI), the Rakosi & Irmtrud measurement was implemented, using a digital caliper with a range of 150 mm. To determine the shape of the arches, plaster models obtained from each maxilla belonging to the sample are made and with the use of 3M brand templates, the arches are classified according to Williams. With the upper arch shape, correlations with facial biotypes have already been established. (p<0.05). Results: The most frequent facial biotype was Mesoprosopo with 38% followed by Leptoprosopo 36% and Euryprosopo 26%. Regarding the arch shape, 46% of the patients studied presented a quadrangular arch shape, 40% Ovoid, and 14% Triangular. None of the variables studied was significantly correlated with the age of the patients. The values calculated for Chi-Square were not significant (p-values > 0.05). Conclusions: The results obtained do not allow for establishing a specific facial anthropometric pattern in individuals from the City of Corrientes. Likewise, there is facial morphometrics regarding the shape of the upper dental arch.

Correlation between cleft width and dental arch symmetry in cleft lip and palate: a longitudinal study

Abstract This study aimed to evaluate the influence of cleft width on dental arch symmetry of children with unilateral cleft lip and palate. Forty-one children were subjected to impression preoperatively (T1; mean age = 0.31 ± 0.07 years) and postoperatively (T2; mean age = 6 .73 ± 1.02 years). Eighty-two digitized dental casts were analyzed by stereophotogrammetry software. The cleft palate width was measured in the anterior (P-P'), middle (M-M'), and posterior (U-U') regions. Also, the following measurements were obtained: anterior intersegment (I-C') and intrasegment (I-C); total intersegment (I-T') and intrasegment (I-T); cleft-side (C'-T') and non-cleft-side (C-T) canine tuberosity. Paired t test and Pearson correlation coefficient were applied (α = 5%). Cleft width had the following means: 10.16 (± 3.46) mm for P-P', 12.45 (± 3.00) mm for M-M', and 12.57 (± 2.71) mm for U-U'. In the longitudinal analysis, I-C' had a significant reduction, while the other measurements significantly increased (p < 0.001). Asymmetry was verified in the following analyses at T1: I-C' vs. I-C and I-T' vs. I-T (p < 0.001); at T2, only in I-C' vs. I-C (p < 0.001). At T1, P-P' vs. I-C' (r = 0.722 and p < 0.001), P-P' vs. I-T' (r = 0.593 and p < 0.001), M-M' vs. I-C' (r = 0.620 and p < 0.001), and M-M' vs. I-T' (r = 0.327 and p < 0.05) showed a positive and significant correlation. At T2, there was a correlation between M-M' and I-C' (r = 0.377 and p < 0.05). In conclusion, the anterior and middle cleft widths influenced palatal asymmetry in the first months of life, while middle width influenced residual asymmetry.

Configurações dentárias reduzidas no contexto de estudos epidemiológicos: associação com desfechos de saúde e validação de critério diagnóstico / Shortened dental configurations in the context of epidemiological studies: association with health outcomes and validation of diagnostic criteria

Objetivou-se mapear os conceitos de configuração dentária reduzida empregados em estudos epidemiológicos associados com desfechos em saúde (estudo 1), bem como avaliar a validade de uma configuração utilizada em estudos epidemiológicos (pares de dentes antagonistas) (Estudo 2). Para o estudo 1 realizou-se uma revisão de literatura do tipo Scoping review com busca nas bases de dados PubMed/Medline, Scopus, Web of Science, Scielo e Cochrane. Dois pesquisadores treinados realizaram a seleção e extração de dados de estudos que avaliaram a associação entre configuração dentária reduzida (exposição) e desfechos em saúde clínicos e centrados na pessoa (saúde geral e saúde bucal), relacionados ao comportamento em saúde (padrões de dieta), além de mortalidade. Desfechos foram classificados de acordo com a Classificação Internacional de Funcionalidade, Incapacidade e Saúde e com a Classificação Internacional de Doenças da Organização Mundial de Saúde (OMS). Configurações dentárias reduzidas basearam-se na contagem de dentes presentes, na posição dos dentes considerando estética, oclusão dentária e condições periodontais. A busca inicial resultou em 12525 referências, sendo 283 incluídos. A atualização da busca incluiu 117 artigos (ntotal=400). Saúde geral (n=186) e saúde bucal (n=192) foram abordadas em número semelhante de estudos. A maioria dos desfechos foram clínicos de saúde geral (n=169), sendo as doenças endócrinas, nutricionais ou metabólicas (n=55) frequentes. Em 144 estudos foram abordadas medidas centradas na pessoa, sendo a qualidade de vida relacionada a saúde bucal (QRSB) a mais frequente (n=60). Os desfechos clínicos de saúde bucal foram predominantemente relacionados às funções de ingestão (n=42) e doenças ou distúrbios do complexo orofacial (n=23). Padrões de dieta (n=39) e mortalidade (n=34) também foram estudados. A configuração dentária reduzida definida como meta pela OMS foi a mais frequente (n=181). Para o estudo 2 avaliou-se a acurácia de pares de dentes antagonistas para mensurar a presença de pares de pré-molares e molares em contato oclusal e a concordância entre a prevalência de Arco Dental Reduzido (ADR) e Dentição funcional (DF) quando unidades oclusais dentárias (UOs)/pares de oclusão posterior (POPs) foram definidas por pares de dentes antagonistas ou pares de dentes em contato oclusal. Dados obtidos em inquérito epidemiológico de saúde bucal realizado em município de Minas Gerais, Brasil. UOs e POPs foram definidos pelo critério epidemiológico (condição da coroa dentária) ou critério clínico "padrão ouro" (registro em papel carbono dos contatos oclusais durante a máxima intercuspidação habitual). Foram calculados sensibilidade, valor preditivo positivo (VPP), valor preditivo negativo (VPN) e acurácia do critério epidemiológico. Sensibilidade, especificidade, VPP e VPN foram 88,5, 87,9, 92,5 e 81,9%, respectivamente, e acurácia foi de 88,3%. Os resultados sobre a concordância observada, coeficientes Kappa e valores estatísticos ß em relação à prevalência de ADR e DF (antagonista e contato oclusal) variaram de 0,82 a 0,98, indicando alto índice de concordância. Efeitos das configurações dentárias reduzidas têm sido investigados principalmente em relação às doenças endócrinas, nutricionais ou metabólicas e medidas de QVRSB. Há diversidade de desfechos em saúde. Critério epidemiológico mostrou-se válido e pode ser utilizado em estudos epidemiológicos para calcular a prevalência de configurações dentárias reduzidas que consideram POPs.

This study mapped definitions of shortened dental configurations and health outcomes employed in association studies (Study 1), as well as to evaluate the validity of a configuration used in epidemiological studies (pairs of antagonistic teeth) (Study 2). For study 1, a literature review of the Scoping review type was carried out with a search in PubMed/Medline, Scopus, Web of Science, Scielo and Cochrane databases. Two trained researchers performed the selection and data extraction of studies that evaluated the association between reduced tooth configuration (exposure) and clinical and person-centered health outcomes (general health and oral health), related to health behavior (dietary patterns), in addition to mortality. Outcomes were classified according to the International Classification of Functioning, Disability and Health and the International Classification of Diseases of the World Health Organization (WHO). Shortened dental configurations were based on the number of teeth present, the position of the teeth regarding esthetics, dental occlusion and periodontal conditions. The initial search resulted in 12525 references, 283 of which were included. The search update included 117 articles (ntotal=400). General health (n=186) and oral health (n=192) were addressed in a similar number of studies. Most outcomes were general health clinics (n=169), with endocrine, nutritional or metabolic diseases (n=55) being frequent. In 144 studies, person-centered measures were addressed, with oral healthrelated quality of life (OHQoL) being the most frequent (n=60). Clinical oral health outcomes were predominantly related to eating functions (n=42) and diseases or disorders of the orofacial complex (n=23). Diet patterns (n=39) and mortality (n=34) were also studied. The shortened dental configuration defined as a goal by the WHO was the most frequent (n=181). For study 2, the accuracy of pairs of antagonistic teeth was evaluated to measure the presence of pairs of premolars and molars in occlusal contact and the agreement between the prevalence of Shortened Dental Arch (SDA) and Functional Dentition (FD) when units occlusal (UOs)/posterior occlusion pairs (POPs) were defined by pairs of antagonistic teeth or pairs of teeth in occlusal contact. Data obtained from an epidemiological survey of oral health carried out in the municipality of Minas Gerais, Brazil. UOs and POPs were defined by epidemiological criteria (condition of the dental crown) or clinical "gold standard" criteria (carbon paper recording of occlusal contacts during maximum habitual intercuspation). Sensitivity, positive predictive value (PPV), negative predictive value (NPV) and accuracy of the epidemiological criterion were calculated. Sensitivity, specificity, PPV and NPV were 88.5, 87.9, 92.5 and 81.9%, respectively, and accuracy was 88.3%. The results on observed agreement, Kappa coefficients and ß statistical values in relation to the prevalence of SDA and FD (antagonist and occlusal contact) ranged from 0.82 to 0.98, indicating a high level of agreement. Effects of reduced tooth configurations have been investigated mainly in relation to endocrine, nutritional or metabolic diseases and OHQoL measures. There is a diversity of health outcomes. Epidemiological criteria proved to be valid and can be used in epidemiological studies to calculate the prevalence of reduced dental configurations that consider POPs.

Surgical effects of rehabilitation protocols on dental arch occlusion of children with cleft lip and palate

Aim: to evaluate the surgical effects of two rehabilitation protocols on dental arch occlusion of 5-year-old children with or without cleft lip and palate. Methods: this is a retrospective longitudinal study the sample comprised 45 digitized dental casts divided into followed groups: Group 1 (G1) ­ children who underwent to cheiloplasty (Millard technique) at 3 months and to one-stage palatoplasty (von Langenbeck technique) at 12 months; Group 2 (G2) ­ children who underwent to cheiloplasty (Millard technique) and two-stage palatoplasty (Hans Pichler technique for hard palate closure) at 3 months and at 12 months to soft palate closure (Sommerlad technique); and Group 3 (G3) ­ children without craniofacial anomalies. Linear measurements, area, and occlusion were evaluated by stereophotogrammetry software. Shapiro-Wilk test was used to verify normality. ANOVA followed by posthoc Tukey test and Kruskal-Wallis followed by posthoc Dunn tests were used to compared groups. Results: For the measures intercanine distance (C-C'), anterior length of dental arch (I-CC'), and total length of the dental arch (I­MM'), there were statistical differences between G1x G3 and G2xG3, the mean was smaller for G1 and G2. No statistically significant differences occurred in the intermolar distance and in the dental arch area among groups. The occlusion analysis revealed significant difference in the comparison of the three groups (p=0.0004). Conclusion: The surgical effects of two rehabilitation protocols affected the occlusion and the development of the anterior region of the maxilla of children with oral clefts when compared to children without oral clefts.

Dental arch characteristics among South Indian twins - A morphometric study

Genetic and environmental factors are essential in occlusal variations and malocclusion and have been of considerable interest to orthodontists. Studies on twin pairs are one of the most effective methods for investigating genetically determined occlusal variables. Many studies have focused on distances between first molars or between canines but malocclusions can also occur in other regions of the dental arch. Aim: To evaluate the characteristics of the dental arch between pairs of Monozygotic (MZ) and Dizygotic (DZ) twins from Southern India. Methods: A random sample of 51 twin pairs (12­18years old) participated in this study. The zygosity of twin pairs was recorded by facial appearance. The occlusion of the first permanent molars was recorded according to Angle's classification. Study models were prepared to assess dental arch characteristics (i.e., arch form, arch perimeter, arch length; intercanine, intermolar width, and teeth size discrepancy). The obtained data was statistically analyzed using SPSS software 19.0. The student's t-test (two-tailed, independent) and Chi-square test was used to determine the significance of studied parameters. Results: Angle's Class I molar relation was more commonly observed followed by the Class II molar relationship among twins. The measured dental arch dimensions did not show a statistically significant difference among twin pairs. The ovoid arch form was commonly observed among Monozygotic and Dizygotic Twins. There was a similarity among MZ and DZ twins in the anterior and overall Bolton's ratio. Conclusion: There were similar occurrences of measured parameters among twins, which showed genetic predominance in the expression of measured dental arch traits

Orthodontic Retainers and the Stability of the Maxillary Arch in Unilateral Cleft lip and Palate Patients: A Systematic Review.

OBJECTIVE: The aim of this systematic review was to elucidate the role of orthodontic retainers on the stability of compensatory orthodontic treatment in patients with unilateral cleft lip and palate. METHODS: Five electronic databases (PubMed, Scopus, Web of Science, LILACS, and LIVIVO) and the grey literature (OpenGrey and Google Scholar) were investigated, according to the population, exposure, comparator, outcomes and Study design eligibility criterion. The risk of bias assessment was determined based on the Risk of Bias In Nonrandomized Studies of Exposure (ROBINS-E) and the level of evidence with the GRADE tool. RESULTS: Three studies were included: two presented moderate risk of bias and one high. A moderate level of evidence revealed a mean value of 0.6 mm of intercanine relapse distance, and great variability between the data, regardless of the use or type of retention or rehabilitation. Relapse in the posterior region showed clinical significance, from -1 to -1.7 mm, especially in individuals who did not use retention, except in patients with symmetrical arches with Hawley retainer, where this value varies from -0.2 ± 0.63 mm. CONCLUSIONS: Orthodontic retainers do not seem essential to prevent relapse at anterior maxillary dimensions after compensatory orthodontic treatment in patients with unilateral cleft lip and palate. Relapse in the posterior region can achieve greater clinical significance, which highlights the need for prolonged use of Hawley retainers and periodic evaluation of the stability of treatment results. Prospective studies with a longer follow-up can improve the certainty of the evidence.

Dental arch definition in computed tomographs using two semi-automatic methods.

Computed tomography is a widely used image examination in dental imaging that provides an accurate location of oral structures and features, including the dental arch, which is an important anatomical feature. This study proposes two new semi-automatic methods for arch definition in CTs, with minimal user effort. This study includes 25 CT examinations. The first method is based on the teeth pulps, and the second one is based on the whole mandible. The methods use thresholding and morphological operations to obtain the arches. The evaluation process includes two different metrics DTW and IoU. For both metrics, the initial results of M1 were very low, but the average performance of M2 can be considered high. The analysis showed that changing the input improves the M1 results substantially. The promising results presented here suggest that these methods can be used as auxiliary tools for the proposed task.

Evaluation of cheiloplasty and palatoplasty on palate surface area in children with oral clefts: longitudinal study.

This study evaluated the palatal surface area in children with different oral clefts after primary surgeries and at five years of age. This longitudinal study was composed by 216 digital models: unilateral complete cleft lip (UCL), unilateral complete cleft lip and palate (UCLP), and complete cleft palate (CP). The models were analysed at four time periods: T1 (before cheiloplasty), T2 (before palatoplasty), T3 (after palatoplasty); and T4 - (at five years of age). Area of the dental arches was measured through stereophotogrammetry software. Measurements evaluated with Student's test and ANOVA followed by the Tukey test (p<0.05) (AQ 1). In the UCL group, the palatal surface area significantly increased among phases. In the primary surgery periods, UCLP and CP significantly decreased (p<0.001). Palatal area in the UCLP group was significantly greater than the CP group. Overall, no statistically significant differences occurred among groups. At T4, the area of the palate in the UCL group was significantly greater than the UCLP group and no significant differences occurred between UCLP and CP groups. This study suggests that cheiloplasty did not inhibit the growth of the palatal surface area in children with UCL and UCLP. Palatoplasty significantly decreased the palatal area in children with UCLP and CP, demonstrating a significant negative effect of palatal repair on maxillary growth. At five years, children with UCLP and CP had a significantly smaller palate area than those with UCL.

Six-year post-surgical evaluation in the treatment protocols in the dental arches of children with oral cleft: longitudinal study

Abstract Oral cleft surgical repairs are performed using different techniques worldwide. Objective To evaluate and compare the development of the dental arches of children with unilateral cleft lip and palate before and after the primary surgeries performed with different techniques at the first months and six years of life. Methodology This is a retrospective longitudinal study. The sample comprised 56 dental casts divided int the following groups: Group 1 (G1) - cheiloplasty (Millard technique) at three months and one-step palatoplasty (von Langenbeck technique) at 12 months; and Group 2 (G2) - cheiloplasty (Millard technique) and two-step palatoplasty: anterior hard palate closure (Hans Pichler technique) at three months and posterior soft palate closure (Sommerlad technique) at 12 months. The digitized dental casts were evaluated at three months - pre-surgical (T1) and six years of life- post-surgical (T2). The following linear measurements were analyzed: intercanine (C-C'), intertuberosity (T-T') distances; anterior dental arch (I-CC'), anterior intersegment (I-C'), and total arch (I-TT') lengths. The palate area was also measured. Parametric and non-parametric tests were applied (p<0.05). Results In G1, the intragroup comparison showed statistically significant smaller I-CC' and I-C' at T2 (p=0.001 and p<0.001, respectively), while T-T', I-TT', and area comparisons were significantly greater (p<0.001, p=0.002, and p<0.001, respectively). In G2, the intragroup comparison exhibited statistically significant smaller C-C' and I-C' at T2 (p=0.004, for both), whereas T-T', I-TT' and area comparisons were significantly greater (p<0.001, p=0.004, and p<0.001, respectively). At T2, the intergroup analysis revealed that G1 had a statistically significant smaller I-CC' (p=0.014). The analysis of the intergroup differences (∆=T2-T1) showed that G1 had a statistically smaller I-CC' (p=0.043). Conclusion The two-step palatoplasty showed a more favorable prognosis for the maxillary growth than one-step palatoplasty in children with oral clefts.

Brazilian Adults Believe that Complete Dentures would be the Solution to the Oral Impacts Caused by Reduced Dentition

Abstract Objective: To evaluate the direct and oral impact-mediated association between reduced dentitions and the self-perceived need for complete dentures (CD) in dentate adults. Material and Methods: Data from the Brazilian Oral Health Survey (2010) were analyzed. The outcome was self-perceived need for CD. Functional dentition (FDClassV) was defined by the presence of the following criteria: level I - ≥1 tooth in each arch, level II - 10 teeth in each arch, level III - 12 anterior teeth, level IV - ≥ 3 posterior occluding pairs (POPs) of premolars and level V - ≥1 bilateral POPs of molars. Oral impacts were assessed with Oral Impacts on Daily Performances scale. Results: FDClassV was associated with a less self-perceived need for CD both directly and mediated by oral impacts. Dentitions without level V were associated with the outcome mediated by oral impacts. Between individuals with 10 teeth in each arch, self-perceived need for CD was similar for those who had or not anterior teeth and POPs. Individuals with <10 teeth in each arch and level III did not have a higher frequency of self-perceived need for CD compared to those with level II. Conclusion: Oral impacts mediated the association between reduced dentitions and self-perceived need for CD. Individuals with tooth loss may report need for CD, even when they have dental configurations compatible with functionality.