RESUMO
A simplified column-buckling model is developed to understand the buckling mechanism of thin-walled strips restrained by uniform lateral pressure in the milling process. The strip is simplified as two rigid columns connected by a rotation spring, resting on a smooth surface, restrained by a uniform pressure and loaded by an axial force. Two loading cases are considered, i.e., the dead load and the follower load. Analytical solutions for the post-buckling responses of the two cases are derived based on the energy method. The minimum buckling force, Maxwell force and stability conditions for the two cases are established. It is demonstrated that the application of higher uniform pressure increases the minimum buckling force for the column and thus makes the column less likely to buckle. For the same pressure level, the dead load is found to be more effective than the follower load in suppressing the buckling of the system. The effect of initial geometric imperfection is also investigated, and the imperfection amplitude and critical restraining pressure that prevent buckling are found to be linearly related. The analytical results are validated by finite element simulations. This analytical model reveals the buckling mechanism of strips under lateral pressure restraint, which cannot be explained by the conventional bifurcation buckling theory, and provides a theoretical foundation for buckling-prevention strategies during the milling process of thin-walled strips, plates and shells commonly encountered in aerospace or automotive industries.
RESUMO
Synthetic membranes featuring confined nanostructures have emerged as a prominent category of leading materials that can selectively separate target ions from complex water matrices. Further advancements in these membranes will pressingly rely on the ability to elucidate the inherent connection between transmembrane ion permeation behaviors and the ion-selective nanostructures. In this review, we first abstract state-of-the-art nanostructures with a diversity of spatial confinements in current synthetic membranes. Next, the underlying mechanisms that govern ion permeation under the spatial nanoconfinement are analyzed. We then proceed to assess ion-selective membrane materials with a focus on their structural merits that allow ultrahigh selectivity for a wide range of monovalent and divalent ions. We also highlight recent advancements in experimental methodologies for measuring ionic permeability, hydration numbers, and energy barriers to transport. We conclude by putting forth the future research prospects and challenges in the realm of high-performance ion-selective membranes.
RESUMO
Drawing inspiration from the jumping mechanisms of insects (e.g., click beetles), bistable structures can convert slow deformations of soft actuating material into fast jumping motions (i.e., power amplification). However, bistable jumpers often encounter large energy barriers for energy release/re-storage, posing a challenge in achieving multimodal (i.e., height/distance) and continuous jumps at the insect scale (body length under 20 mm). Here, a new offset-buckling bistable design is introduced that features antisymmetric equilibrium states and tunable energy barriers. Leveraging this design, a Boundary Actuation Tunable Energy-barrier (BATE) jumper (body length down to 15 mm) is developed, and transform BATE jumper from height-jump mode (up to 12.7 body lengths) to distance-jump mode (up to 20 body lengths). BATE jumpers can perform agile continuous jumping (within 300 ms for energy release/re-storage times) and real-time status detection is further demonstrated. This insect-level performance of the proposed BATE jumper showcases its potential toward future applications in exploration, search, and rescue.
RESUMO
Nanopore technology is widely used for sequencing DNA, RNA, and peptides with single-molecule resolution, for fingerprinting single proteins, and for detecting metabolites. However, the molecular driving forces controlling the analyte capture, its residence time, and its escape have remained incompletely understood. The recently developed Nanopore Electro-Osmotic trap (NEOtrap) is well fit to study these basic physical processes in nanopore sensing, as it reveals previously missed events. Here, we use the NEOtrap to quantitate the electro-osmotic and electrophoretic forces that act on proteins inside the nanopore. We establish a physical model to describe the capture and escape processes, including the trapping energy potential. We verified the model with experimental data on CRISPR dCas9-RNA-DNA complexes, where we systematically screened crucial modeling parameters such as the size and net charge of the complex. Tuning the balance between electrophoretic and electro-osmotic forces in this way, we compare the trends in the kinetic parameters with our theoretical models. The result is a comprehensive picture of the major physical processes in nanopore trapping, which helps to guide the experiment design and signal interpretation in nanopore experiments.
RESUMO
Animals and robots must self-right on the ground after overturning. Biology research described various strategies and motor patterns in many species. Robotics research devised many strategies. However, we do not well understand how the physical principles of how the need to generate mechanical energy to overcome the potential energy barrier governs behavioral strategies and 3-D body rotations given the morphology. Here I review progress on this which I led studying cockroaches self-righting on level, flat, solid, low-friction ground, by integrating biology experiments, robotic modeling, and physics modeling. Animal experiments using three species (Madagascar hissing, American, and discoid cockroaches) found that ground self-righting is strenuous and often requires multiple attempts to succeed. Two species (American and discoid cockroaches) often self-right dynamically, using kinetic energy to overcome the barrier. All three species use and often stochastically transition across diverse strategies. In these strategies, propelling motions are often accompanied by perturbing motions. All three species often display complex yet stereotyped body rotation. They all roll more in successful attempts than in failed ones, which lowers the barrier, as revealed by a simplistic 3-D potential energy landscape of a rigid body self-righting. Experiments of an initial robot self-righting via rotation about a fixed axis revealed that, the longer and faster appendages push, the more mechanical energy can be gained to overcome the barrier. However, the cockroaches rarely achieve this. To further understand the physical principles of strenuous ground self-righting, we focused on the discoid cockroach's leg-assisted winged self-righting. In this strategy, wings propel against the ground to pitch the body up but are unable to overcome the highest pitch barrier. Meanwhile, legs flail in the air to perturb the body sideways to self-right via rolling. Experiments using a refined robot and an evolving 3-D potential energy landscape revealed that, although wing propelling cannot generate sufficient kinetic energy to overcome the highest pitch barrier, it reduces the barrier to allow small kinetic energy from the perturbing legs to probabilistically overcome the barrier to self-right via rolling. Thus, only by combining propelling and perturbing can self-righting be achieved, when it is so strenuous; this physical constraint leads to the stereotyped body rotation. Finally, multi-body dynamics simulation and template modeling revealed that the animal's substantial randomness in wing and leg motions help it by chance to find good coordination, which accumulates more mechanical energy to overcome the barrier, thus increasing the likelihood of self-righting.
RESUMO
In computational studies using the Lennard-Jones (LJ) potential, the widely adopted 2.5σcutoff radius effectively truncates pairwise interactions across diverse systems (Santraet al2008J. Chem. Phys.129234704, Chen and Gao 2021Friction9502-12, Bolintineanuet al2014Part. Mech.1321-56, Takahiro and Kazuhiro 2010J. Phys.: Conf. Ser.215012123, Zhouet al2016Fuel180718-26, Toxvaerd and Dyre 2011J. Chem. Phys.134081102, Toxvaerd and Dyre 2011J. Chem. Phys.134081102). Here, we assess its adequacy in determining energy barriers encountered by a Si monoatomic tip sliding on various two-dimensional (2D) monolayers, which is crucial for understanding nanoscale friction. Our findings emphasize the necessity of a cutoff radius of at least 3.5σto achieve energy barrier values exceeding 95% accuracy across all studied 2D monolayers. Specifically, 3.5σcorresponds to 12.70 Å in graphene, 12.99 Å in MoS2and 13.25 Å in MoSe2. The barrier values calculated using this cutoff support previous experiments comparing friction between different orientations of graphene and between graphene and MoS2(Almeidaet al2016Sci. Rep.631569, Zhanget al2014Sci. China57663-7). Furthermore, we demonstrate the applicability of the 3.5σcutoff for graphene on an Au substrate and bilayer graphene. Additionally, we investigate how the atomic configuration of the tip influences the energy barrier, finding a nearly threefold increase in the barrier along the zigzag direction of graphene when using a Si(001) tip composed of seven Si atoms compared to a monoatomic Si tip.
RESUMO
Two-dimensional (2D) transition metal dichalcogenides lateral heterostructures exhibit excellent performance in electrics and optics. The electron transport of the heterostructures can be effectively regulated by ingenious design. In this study, we construct a monolayer MoSe2/WSe2lateral heterostructure, covalently connecting monolayer MoSe2and monolayer WSe2. Using the Extended Huckel Theory method, we explored current-voltage characteristics under varied conditions, including altering carrier density, atomic replacement and interface angles. Calculations demonstrate a significant electrical rectification ratio (ERR) ranging from 200 to 800. Additionally, Employing Density Functional Theory with non-equilibrium Green's function method, we investigated electronic properties, attributing the rectification effect to electronic state distribution differences, asymmetric transmission coefficients and band bending of projected local density of states. The expandability of the interfacial energy barrier enhances the rectification effect through adjustments in carrier concentration, atomic replacements and interface size. However, these enhancements introduce challenges such as increased electron-boundary scattering and reduced ambipolarity, resulting in a lower ERR. This study provides valuable theoretical insights for optimizing 2D electronic diode devices, offering avenues for precise control of the rectification effect.
RESUMO
Modulating the energy barrier of reaction intermediates to surmount sluggish kinetics is an utterly intriguing strategy for amplifying the oxygen reduction reaction. Herein, a Cu3P/CoP hybrid is incorporated on hollow porous N-doped carbon nanospheres via dopamine self-polymerization and high-temperature treatment. The resultant Cu3P/CoP@NC showcases a favorable mass activity of 4.41 mA mg-1 and a kinetic current density of 2.38 mA cm-2. Strikingly, the catalyst endows the aqueous Zn-air battery (ZAB) with a large power density of 209.0 mW cm-2, superb cyclability over 317 h, and promising application prospects in flexible ZAB. Theoretical simulations reveal that Cu functions as a modulator to modify the free energy of intermediates and adsorbs the O2 on the Co sites, hence rushing the reaction kinetics. The open and hydrophilic hollow spherical mesoporous structure provides unimpeded channels for reactant diffusion and electrolyte penetration, whereas the exposed inner and outer surfaces can confer a plethora of accessible actives sites. This research establishes a feasible design concept to tune catalytic activity for non-noble metal materials by construction of a rational nanoframework.
RESUMO
Liquid-liquid separation, commonly referred to as oiling-out, frequently can occurs during crystallization, especially the anti-solvent crystallization process of phosphoryl compounds, and poses potential hurdle for high-quality product. Efficiently regulating oiling-out during crystallization remains a significant challenge. Among various techniques, ultrasound emerges as a green and effective approach to enhance the crystallization process. However, there is a dearth of in-depth research exploring the microscopic mechanisms of this process. Therefore, our research focused on the fructose-1,6-diphosphate (FDP), a typical phosphoryl compound, to gain a deeper understanding of how ultrasound influences the oiling-out process. The focused beam reflectance measurement (FBRM) technology was used to investigate the oiling-out phenomenon of FDPNa3 across various solvent ratios. In addition, the influence of ultrasound on the induction time was studied and the nucleation energy barrier was calculated. Finally, to further unravel the microscopic mechanisms, we utilized molecular simulation techniques to analyze the impact of ultrasound power on the dissolution-precipitation process. Our observations revealed a consistent oiling-out process that attainted a stable state regardless of the solvent employed. Notably, the results of the oiling-out induction time experiments indicated that ultrasound significantly reduced helped lower the nucleation energy barrier of FDP3- ions, thereby dismantling FDP3-clusters in solution. Thus, in turn, shortened the reduced induction time and promoted crystallization. Furthermore, ultrasound reduced the interactions between FDP3-ions and water molecules as well as FDP3- ions themselves. As simulated field intensity increased, these interaction forces gradually diminished, the thickness of the hydration layer surrounding the FDP3- clusters facilitating the disruption of clusters, ultimately enhancing the crystallization process.
RESUMO
Lithium-oxygen (Li-O2) batteries have obtained widespread attention as next-generation energy storage systems due to their extremely high energy density. However, the high charge overpotential, attributed to the insulating property of Li2O2, significantly limits the energy efficiency and triggers solvent degradation. The high electrochemical activities of oxygen reduction reactions (ORR) and oxygen evolution reactions (OER) on the cathode are crucial for alleviating the high charging polarizations and enhancing the lifetime of Li-O2 batteries, which are also top challenges of state-of-art research. In this review, the scientific challenges and the proposed solutions in the development of cathode catalysts have been summarized. The recent research advancements on the nanoengineering of cathode catalysts for Li-O2 batteries have been comprehensively discussed, and the perspectives on the structure optimization are presented. Meanwhile, we have elucidated the structure-performance relationship between the electronic state and performance of the cathode catalysts at the nanoscale level. This review intends to provide guidelines for the design and construction of cathode catalysts in advanced Li-O2 batteries.
RESUMO
Alkene dipeptide isosteres (ADIs) are promising surrogates of peptide bonds that enhance the bioactive peptide resistance to enzymatic hydrolysis in medicinal chemistry. In this study, we investigated the substitution effects of an ADI on the energy barrier of cis-trans isomerization in the acetyl proline methyl ester (Ac-Pro-OMe) model. The (E)-alkene-type proline analog, which favors a cis-amide conformation, exhibits a lower rotational barrier than native Ac-Pro-OMe. A van't Hoff analysis suggests that the energy barrier is primarily reduced by enthalpic repulsion. It was concluded that although carbon-carbon double bonds and pyrrolidine rings individually increase the rigidity of the incorporation site, their combination can provide structural flexibility and disrupt bioactive conformations. This work provides new insights into ADI-based drug design.
Assuntos
Alcenos , Dipeptídeos , Dipeptídeos/química , Alcenos/química , Prolina/química , Estrutura Molecular , Termodinâmica , RotaçãoRESUMO
Exploiting highly efficient, cost-effective and stable electrocatalysts is key to decreasing hydrogen evolution reaction (HER) kinetics energy barrier. Herein, the alkaline HER kinetics energy barrier can greatly reduce by the joint strategies of the cation vacancy and heterostructure engineering, which is seldom explored and remains ambiguous. In this study, an efficient and stable copper foam-supported Cu3P-CoP heterostructure electrocatalyst with cation vacancy defects (defined as Cu3P-CoP-VAl/CF) was designed for HER via the successive coprecipitation, electrodeposition, alkali etching and phosphorization treatments. As anticipated, the as-obtained Cu3P-CoP-VAl/CF electrocatalyst reveals a remarkable catalytic activity for HER with a low overpotential of 205 mV at a current density of 100 mA·cm-2, a high turnover frequency value of 1.05 s-1 at an overpotential of 200 mV and a small apparent activation energy (Ea) of 9 kJ·mol-1, while shows superior long-term stability at large current densities of 100 and 240 mA·cm-2. Systematic experiment and characterization data demonstrate that the formed cation vacancy could optimize the Ea, leading to the decrease of the kinetic barriers of Cu3P-CoP/CF heterostructure, as well as the established heterogeneous interface induced a synergistic effect between biphasic components on boosting the kinetics toward HER. The results of density functional theory disclose that the synergistic effect of Cu3P-CoP heterostructure could decrease the energy barrier and optimize Gibbs free energy of hydrogen adsorption, resulting in the enhancement of intrinsic catalytic activity of Cu3P-CoP-VAl/CF. More significantly, the alkali-cell assembled by Cu3P-CoP-VAl/CF (cathode) and RuO2/CF (anode) behaves outstanding water splitting performance, delivering a current density of 10 mA·cm-2 at a relatively small applied voltage of 1.58 V, along with encouraging long-term durability. In addition, the alkaline Zn-H2O battery with Cu3P-CoP-VAl/CF as the cathode has been fabricated for the simultaneous generation of electricity and hydrogen, which displays a large power density of up to 4.1 mW·cm-2. The work demonstrates that rational strategy for the design of competent electrocatalysts can effectively accelerate the kinetics of HER, which supplies valuable insights for practical applications in overall water splitting.
RESUMO
Electroporation is pivotal in bioelectrochemistry for cellular manipulation, with prominent applications in drug delivery and cell membrane studies. A comprehensive understanding of pore generation requires an in-depth analysis of the critical pore size and the corresponding energy barrier at the onset of cell rupture. However, many studies have been limited to basic models such as artificial membranes or theoretical simulations. Challenging this paradigm, our study pioneers using a microfluidic electroporation chip array. This tool subjects live breast cancer cell species to a diverse spectrum of alternating current electric field conditions, driving electroporation-induced cell rupture. We conclusively determined the rupture voltages across varying applied voltage loading rates, enabling an unprecedented characterization of electric cell rupture dynamics encompassing critical pore radius and energy barrier. Further bolstering our investigation, we probed cells subjected to cholesterol depletion via methyl-ß-cyclodextrin and revealed a strong correlation with electroporation. This work not only elucidates the dynamics of electric rupture in live cell membranes but also sets a robust foundation for future explorations into the mechanisms and energetics of live cell electroporation.
Assuntos
Membrana Celular , Eletroporação , Humanos , Membrana Celular/metabolismo , Microfluídica , Linhagem Celular Tumoral , beta-Ciclodextrinas , Colesterol , Dispositivos Lab-On-A-Chip , Neoplasias da MamaRESUMO
Regulating the microalgal initial adhesion in biofilm formation is a key approach to address the challenges of attached microalgae cultivation. As a type of phytohormone, Indole-3-acetic acid (IAA) can promote the growth and metabolism of microalgae. However, limited knowledge has been acquired of how IAA can change the initial adhesion of microalgae in biofilm formation. This study focused on investigating the initial adhesion of microalgae under different IAA concentrations exposure in biofilm formation. The results showed that IAA showed obvious hormesis-like effects on the initial adhesion ability of microalgae biofilm. Under exposure to the low concentration (0.1 mg/L) of IAA, the initial adhesion quantity of microalgae on the surface of the carrier reached the highest value of 7.2 g/m2. However, exposure to the excessively high concentration (10 mg/L) of IAA led to a decrease in the initial adhesion capability of microalgal biofilms. The enhanced adhesion of microalgal biofilms due to IAA was attributed to the upregulation of genes related to the Calvin Cycle, which promoted the synthesis of hydrophobic amino acids, leading to increased protein secretion and altering the surface electron donor characteristics of microalgal biofilms. This, in turn, reduced the energy barrier between the carriers and microalgae. The research findings would provide crucial support for the application of IAA in regulating the operation of microalgal biofilm systems.
Assuntos
Biofilmes , Ácidos Indolacéticos , Microalgas , Ácidos Indolacéticos/metabolismo , Ácidos Indolacéticos/farmacologia , Biofilmes/efeitos dos fármacos , Biofilmes/crescimento & desenvolvimento , Microalgas/efeitos dos fármacos , Microalgas/fisiologia , Reguladores de Crescimento de Plantas/farmacologiaRESUMO
Using superhydrophobic surfaces (SHSs) with the water-repellent Cassie-Baxter (CB) state is widely acknowledged as an effective approach for anti-icing performances. Nonetheless, the CB state is susceptible to diverse physical phenomena (e.g., vapor condensation, gas contraction, etc.) at low temperatures, resulting in the transition to the sticky Wenzel state and the loss of anti-icing capabilities. SHSs with various micronanostructures have been empirically examined for enhancing the CB stability; however, the energy barrier transits from the metastable CB state to the stable Wenzel state and thus the CB stability enhancement is currently not enough to guarantee a well and appliable anti-icing performance at low temperatures. Here, we proposed a dual-energy-barrier design strategy on superhydrophobic micronanostructures. Rather than the typical single energy barrier of the conventional CB-to-Wenzel transition, we introduced two CB states (i.e., CB I and CB II), where the state transition needed to go through CB I and CB II then to Wenzel state, thus significantly improving the entire CB stability. We applied ultrafast laser to fabricate this dual-energy-barrier micronanostructures, established a theoretical framework, and performed a series of experiments. The anti-icing performances were exhibited with long delay icing times (over 27,000 s) and low ice-adhesion strengths (0.9 kPa). The kinetic mechanism underpinning the enhanced CB anti-icing stability was elucidated and attributed to the preferential liquid pinning in the shallow closed structures, enabling the higher CB-Wenzel transition energy barrier to sustain the CB state. Comprehensive durability tests further corroborated the potentials of the designed dual-energy-barrier structures for anti-icing applications.
RESUMO
After the second industrial revolution, social productivity developed rapidly, and the use of fossil fuels such as coal, oil, and natural gas increased greatly in industrial production. The burning of these fossil fuels releases large amounts of greenhouse gases such as CO2, which has caused greenhouse effects and global warming. This has endangered the planet's ecological balance and brought many species, including animals and plants, to the brink of extinction. Thus, it is crucial to address this problem urgently. One potential solution is the use of syngas fermentation with microbial cell factories. This process can produce chemicals beneficial to humans, such as ethanol as a fuel while consuming large quantities of harmful gases, CO and CO2. However, syngas-fermenting microorganisms often face a metabolic energy deficit, resulting in slow cell growth, metabolic disorders, and low product yields. This problem limits the large-scale industrial application of engineered microorganisms. Therefore, it is imperative to address the energy barriers of these microorganisms. This paper provides an overview of the current research progress in addressing energy barriers in bacteria, including the efficient capture of external energy and the regulation of internal energy metabolic flow. Capturing external energy involves summarizing studies on overexpressing natural photosystems and constructing semiartificial photosynthesis systems using photocatalysts. The regulation of internal energy metabolic flows involves two parts: regulating enzymes and metabolic pathways. Finally, the article discusses current challenges and future perspectives, with a focus on achieving both sustainability and profitability in an economical and energy-efficient manner. These advancements can provide a necessary force for the large-scale industrial application of syngas fermentation microbial cell factories.
Assuntos
Fermentação , Bactérias/metabolismo , Metabolismo Energético , BiocombustíveisRESUMO
The mercury oxidation performance of Ce/TiO2 catalyst can be further enhanced by transition metal modifications. This study employed density functional theory (DFT) calculations to investigate the adsorption and oxidation mechanisms of Hg0 on Ce/TiO2(001) and its transition metal modified surfaces. According to the calculation results, Ru-, Mo-, Nb-, and Mn-doping increased the affinity of the Ce/TiO2(001) surface towards Hg0 and HCl, thereby facilitating the efficient capture and oxidation of Hg0. The increased adsorption energy (Eads) of the intermediate HgCl on the modified surfaces could promote its conversion to the final product HgCl2. The modification of transition metals impeded the desorption of the final products HgCl2 and HgO, but it did not serve as the rate-determining step. The oxidation of Hg0 by lattice oxygen and HCl followed the Mars-Maessen and Langmuir-Hinshelwood mechanisms, respectively. HCl exhibited higher mercury oxidation ability than lattice oxygen. The reactivity of lattice oxygen could be further improved by doping transition metals, their promotion order was Ru > Nb > Mo > Mn. In a HCl atmosphere, Mn modification could significantly reduce the energy barrier for HCl activation and HgCl2 formation, providing the optimal enhancement for the mercury oxidation ability of Ce/TiO2 catalyst. The screening method of transition metal modified components based on surface adsorption reaction and oxidation energy barrier was proposed in this study, which provided theoretical guidance for the development of CeTi based catalysts with high mercury oxidation activity.
RESUMO
High-performance and air-stable single-molecule magnets (SMMs) can offer great convenience for the fabrication of information storage devices. However, the controversial requisition of high stability and magnetic axiality is hard to balance for lanthanide-based SMMs. Here, a family of dysprosium(III) crown ether complexes possessing hexagonal-bipyramidal (pseudo-D6h symmetry) local coordination geometry with tunable air stability and effective energy barrier for magnetization reversal (Ueff) are shown. The three complexes share the common formula of [Dy(18-C-6)L2][I3] (18-C-6 = 1,4,7,10,13,16-hexaoxacyclooctadecane; L = I, 1; L = OtBu 2 and L = 1-AdO 3). 1 is highly unstable in the air. 2 can survive in the air for a few minutes, while 3 remains unchanged in the air for more than 1 week. This is roughly in accordance with the percentage of buried volumes of the axial ligands. More strikingly, 2 and 3 show progressive enhancement of Ueff and 3 exhibits a record high Ueff of 2427(19) K, which significantly contributes to the 100 s blocking temperature up to 11 K for Yttrium-diluted sample, setting a new benchmark for solid-state air-stable SMMs.
RESUMO
All-solid-state batteries (ASSBs) working at room and mild temperature have demonstrated inspiring performances over recent years. However, the kinetic attributes of the interface applicable to the subzero temperatures are still unidentified, restricting the low-temperature interface design and operation. Herein, a host of cathode interfaces are constructed and investigated to unlock the critical interface features required for cryogenic temperatures. The unstable interface between LiNi0.90Co0.05Mn0.05O2 (Ni90) and Li6PS5Cl (LPSC) sulfide solid electrolyte (SE) results in unfavorable cathode-electrolyte interphase (CEI) and sluggish lithium-ion transport across the CEI. After inserting a Li2ZrO3 (LZO) coating layer, the activation energy of the Ni90@LZO/sulfide SE interface can be reduced from 60.19 kJ mol-1 to 41.39 kJ mol-1 owing to the suppressed interfacial reactions. Through replacing the LPSC SE and LZO coating layer by the Li3InCl6 (LIC) halide SE, both a highly stable interface and low activation energy (25.79 kJ mol-1) can be achieved, thus realizing an improved capacity retention (26.9%) at -30 °C for the Ni90/LIC/LPSC/Li-In ASSB. Moreover, theoretical evaluation clarifies that cathode/SE interfaces with high ionic conductivity and low energy barrier are favorable to the Li+ conduction through the interphase and the Li+ transfer across the cathode/interphase interface. These critical understandings may provide guidance for low-temperature interface design in ASSBs.
RESUMO
Scramblases play a pivotal role in facilitating bidirectional lipid transport across cell membranes, thereby influencing lipid metabolism, membrane homeostasis, and cellular signaling. MTCH2, a mitochondrial outer membrane protein insertase, has a membrane-spanning hydrophilic groove resembling those that form the lipid transit pathway in known scramblases. Employing both coarse-grained and atomistic molecular dynamics simulations, we show that MTCH2 significantly reduces the free energy barrier for lipid movement along the groove and therefore can indeed function as a scramblase. Notably, the scrambling rate of MTCH2 in silico is similar to that of voltage-dependent anion channel (VDAC), a recently discovered scramblase of the outer mitochondrial membrane, suggesting a potential complementary physiological role for these mitochondrial proteins. Finally, our findings suggest that other insertases which possess a hydrophilic path across the membrane like MTCH2, can also function as scramblases.