Influence of Semiconductor Morphology on Photocatalytic Activity of Plasmonic Photocatalysts: Titanate Nanowires and Octahedral Anatase Nanoparticles.

Octahedral anatase particles (OAP) with eight exposed and thermodynamically most stable (101) facets were prepared by an ultrasonication-hydrothermal (US-HT) reaction from potassium titanate nanowires (TNW). The precursor (TNW) and the product (OAP) of US-HT reaction were modified with nanoparticles of noble metals (Au, Ag or Pt) by photodeposition. Samples were characterized by X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), diffuse reflectance spectroscopy (DRS), scanning transmission electron microscopy (STEM) and time-resolved microwave conductivity (TRMC). The photocatalytic activity was investigated in three reaction systems, i.e., anaerobic dehydrogenation of methanol and oxidative decomposition of acetic acid under UV/vis irradiation, and oxidation of 2-propanol under vis irradiation. It was found that hydrogen liberation correlated with work function of metals, and thus the most active were platinum-modified samples. Photocatalytic activities of bare and modified OAP samples were much higher than those of TNW samples, probably due to anatase presence, higher crystallinity and electron mobility in faceted NPs. Interestingly, noble metals showed different influence on the activity depending on the semiconductor support, i.e., gold-modified TNW and platinum-modified OAP exhibited the highest activity for acetic acid decomposition, whereas silver- and gold-modified samples were the most active under vis irradiation, respectively. It is proposed that the form of noble metal (metallic vs. oxidized) as well as the morphology (well-organized vs. uncontrolled) have a critical effect on the overall photocatalytic performance. TRMC analysis confirmed that fast electron transfer to noble metal is a key factor for UV activity. It is proposed that the efficiency of plasmonic photocatalysis (under vis irradiation) depends on the oxidation form of metal (zero-valent preferable), photoabsorption properties (broad localized surface plasmon resonance (LSPR)), kind of metal (silver) and counteraction of "hot" electrons back transfer to noble metal NPs (by controlled morphology and high crystallinity).

Tailored Synthesis of Porous TiO2 Nanocubes and Nanoparallelepipeds with Exposed {111} Facets and Mesoscopic Void Space: A Superior Candidate for Efficient Dye-Sensitized Solar Cells.

Anatase TiO2 nanocubes and nanoparallelepipeds, with highly reactive {111} facets exposed, were developed for the first time through a modified one pot hydrothermal method, through the hydrolysis of tetrabutyltitanate in the presence of oleylamine as the morphology-controlling capping-agent and using ammonia/hydrofluoric acid for stabilizing the {111} faceted surfaces. These nanocubes/nanoparallelepipeds were characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), high resolution transmission electron microscopy (HRTEM) and high angle annular dark-field scanning TEM (HAADF-STEM). Accordingly, a possible growth mechanism for the nanostructures is elucidated. The morphology, surface area and the pore size distribution of the TiO2 nanostructures can be tuned simply by altering the HF and ammonia dosage in the precursor solution. More importantly, optimization of the reaction system leads to the assembly of highly crystalline, high surface area, {111} faceted anatase TiO2 nanocubes/nanoparallelepipeds to form uniform mesoscopic void space. We report the development of a novel double layered photoanode for dye sensitized solar cells (DSSCs) made of highly crystalline, self-assembled faceted TiO2 nanocrystals as upper layer and commercial titania nanoparticles paste as under layer. The bilayered DSSC made from TiO2 nanostructures with exposed {111} facets as upper layer shows a much higher power conversion efficiency (9.60%), than DSSCs fabricated with commercial (P25) titania powder (4.67%) or with anatase TiO2 nanostructures having exposed {101} facets (7.59%) as the upper layer. The improved performance in bilayered DSSC made from TiO2 nanostructures with exposed {111} facets as the upper layer is attributed to high dye adsorption and fast electron transport dynamics owing to the unique structural features of the {111} facets in TiO2. Electrochemical impedance spectroscopy (EIS) measurements conducted on the cells supported these conclusions, which showed that the bilayered DSSC made from TiO2 nanostructures with exposed {111} facets as the upper layer possessed lower charge transfer resistance, higher electron recombination resistance, longer electron lifetime and higher collector efficiency characteristics, compared to DSSCs fabricated with commercial (P25) titania powder or with anatase TiO2 nanostructures having exposed {101} facets as the upper layer.

Faceted titania nanocrystals doped with indium oxide nanoclusters as a superior candidate for sacrificial hydrogen evolution without any noble-metal cocatalyst under solar irradiation.

Development of unique nanoheterostructures consisting of indium oxide nanoclusters like species doped on the TiO2 nanocrystals surfaces with {101} and {001} exposed facets, resulted in unprecedented sacrificial hydrogen production (5.3 mmol h(-1) g(-1)) from water using methanol as a sacrificial agent, under visible light LED source and AM 1.5G solar simulator (10.3 mmol h(-1) g(-1)), which is the highest H2 production rate ever reported for titania based photocatalysts, without using any noble metal cocatalyst. X-ray photoelectron spectroscopy (XPS) analysis of the nanostructures reveals the presence of Ti-O-In and In-O-In like species on the surface of nanostructures. Electron energy-loss spectroscopy (EELS) elemental mapping and EDX spectroscopy techniques combined with transmission electron microscope evidenced the existence of nanoheterostructures. XPS, EELS, EDX, and HAADF-STEM tools collectively suggest the presence of indium oxide nanoclusters like species on the surface of TiO2 nanostructures. These indium oxide nanocluster doped TiO2 (In2O3/T{001}) single crystals with {101} and {001} exposed facets exhibited 1.3 times higher visible light photocatalytic H2 production than indium oxide nanocluster doped TiO2 nanocrystals with only {101}facets (In2O3/T{101}) exposed. The remarkable photocatalytic activity of the obtained nanoheterostructures is attributed to the combined synergetic effect of indium oxide nanoclusters interacting with the titania surface, enhanced visible light response, high crystallinity, and unique structural features.