Combining slow-release fertilizer and plastic film mulching reduced the carbon footprint and enhanced maize yield on the Loess Plateau.

Agricultural practices significantly contribute to greenhouse gas (GHG) emissions, necessitating cleaner production technologies to reduce environmental pressure and achieve sustainable maize production. Plastic film mulching is commonly used in the Loess Plateau region. Incorporating slow-release fertilizers as a replacement for urea within this practice can reduce nitrogen losses and enhance crop productivity. Combining these techniques represents a novel agricultural approach in semi-arid areas. However, the impact of this integration on soil carbon storage (SOCS), carbon footprint (CF), and economic benefits has received limited research attention. Therefore, we conducted an eight-year study (2015-2022) in the semi-arid northwestern region to quantify the effects of four treatments [urea supplied without plastic film mulching (CK-U), slow-release fertilizer supplied without plastic film mulching (CK-S), urea supplied with plastic film mulching (PM-U), and slow-release fertilizer supplied with plastic film mulching (PM-S)] on soil fertility, economic and environmental benefits. The results revealed that nitrogen fertilizer was the primary contributor to total GHG emissions (≥71.97%). Compared to other treatments, PM-S increased average grain yield by 12.01%-37.89%, water use efficiency by 9.19%-23.33%, nitrogen accumulation by 27.07%-66.19%, and net return by 6.21%-29.57%. Furthermore, PM-S decreased CF by 12.87%-44.31% and CF per net return by 14.25%-41.16%. After eight years, PM-S increased SOCS (0-40 cm) by 2.46%, while PM-U decreased it by 7.09%. These findings highlight the positive effects of PM-S on surface soil fertility, economic gains, and environmental benefits in spring maize production on the Loess Plateau, underscoring its potential for widespread adoption and application.

Highly selective and visual detection of vanillin based on fluorescence Cd-MOF sensor in milk powders.

Vanillin is a commonly used synthetic flavoring agent in daily life. However, excessive intake of vanillin may pose risks to human health. Therefore, there is an urgent need for rapid and sensitive detection methods for vanillin. In this study, we developed a fluorescent sensor based on Cd-MOF for the sensitive and selective recognition of vanillin. The presence of vanillin leads to significant fluorescence quenching of Cd-MOF due to competitive absorption and photoinduced electron transfer (PET). The limit of detection was determined to be 39.6 nM, which is the lowest-among the reported fluorescent probes. The sensor was successfully applied for the detection of vanillin in real samples such as powdered milk and milk, with a recovery rate ranging from 96.88 % to 104.83 %. Furthermore, by immobilizing the Cd-MOF probe into a polyvinyl alcohol (PVA) film, we achieved a portable and visual detection composite materials for vanillin.

Sensing features, on-site detection and bio-imaging application of a tripodal tris(hydroxycoumarin) based probe towards Cu2+/His.

A new tripodal tris(hydroxycoumarin) based Schiff base, HCTN was synthesized and characterized by FT-IR, 1H NMR, 13C NMR and ESI-HRMS. The probe, HCTN exhibits cyan emission in DMSO/HEPES buffer (9:1, v/v) which selectively detects Cu2+ ion via turn-off fluorescence. The quenching of the fluorescence was due to the binding of the probe, HCTN towards paramagnetic Cu2+ ion resulting in chelation enhanced quenching effect (CHEQ). From the spectroscopic results, the limit of detection of Cu2+ ion was obtained as very low as 0.40 × 10-9 M. The complexation of the metal ion, Cu2+ towards the probe HCTN was confirmed by the ESI-HRMS and Job's plot analysis which supports 1:1 binding stochiometric ratio. In order to validate the affinity of Cu2+ ion towards histidine, the HCTN+Cu2+ system was utilized for the detection of histidine via turn-on mode by the metal displacement approach. The detection limit of His was found to be 7.31 × 10-10 M. In addition to the above, the probe was utilized for various detection applications such as paper strips, cotton swabs, logic gates and thin film applications. The probe, HCTN extends its application to the confocal bioimaging to sense the Cu2+ and Histidine intracellularly.

Efetividade de um filme na ansiedade e medo de crianças em idade escolar submetidas a cirurgia / Effectiveness of an educational video in reducing anxiety and fear in school-aged children undergoing surgery / Eficacia de una película sobre la ansiedad y el miedo en escolares sometidos a cirugía

Resumo Enquadramento: A hospitalização e a cirurgia são consideradas pela criança como eventos ameaçadores e com repercussões no seu comportamento, nomeadamente ansiedade e medo. Objetivo: Avaliar a efetividade de um filme preparatório para procedimentos a realizar antes de uma cirurgia de ambulatório visando a redução da ansiedade e medo. Metodologia: Estudo randomizado, controlado, envolvendo 60 crianças (6-14 anos), submetidas a cirurgia de ambulatório. O grupo de intervenção visualizou um filme no período pré-operatório e o grupo de controlo recebeu os cuidados habituais. A efetividade do filme foi medida através da escala de ansiedade Children's Anxiety Meter-State e o medo pela escala Children's Fear Scale. Resultados: Não se observaram diferenças significativas (p > 0,05) entre o grupo de intervenção que visualizou o filme e o grupo de controlo que seguiu os cuidados pré-operatórios habituais. Conclusão: Importa avaliar de forma precisa se os custos envolvidos nesta intervenção compensam os benefícios. Sugere-se mais investigação nesta área, ajustando outros programas que se revelem mais efetivos neste contexto.

Abstract Background: Children often perceive hospitalization and surgery as threatening events that can lead to feelings of anxiety and fear. These feelings may affect their behaviors. Objective: To evaluate the effectiveness of an educational video in reducing anxiety and fear before outpatient surgery. Methodology: A randomized controlled study was conducted with 60 children (6 - 14 years old) undergoing outpatient surgery. The intervention group watched an educational video during the preoperative period, while the control group received standard preoperative care. The effectiveness of the video was measured using the Children's Anxiety Meter-State scale, and fear was measured using the Children's Fear Scale. Results: No significant differences (p > 0.05) were found between the intervention group that watched the video and the control group that received standard preoperative care. Conclusion: An accurate assessment of whether the costs of this intervention outweigh the benefits is essential. Further research is recommended, particularly in adapting other programs that have proven more effective in this context.

Resumen Marco contextual: La hospitalización y la intervención quirúrgica son percibidas por el niño como acontecimientos amenazantes que repercuten en su comportamiento, concretamente en la ansiedad y el miedo. Objetivo: Evaluar la eficacia de una película preparatoria para los procedimientos que deben realizarse antes de la cirugía ambulatoria con el fin de reducir la ansiedad y el miedo. Metodología: Estudio aleatorizado y controlado en el que participaron 60 niños (de 6 a 14 años) sometidos a cirugía ambulatoria. El grupo de intervención vio una película en el periodo preoperatorio y el grupo de control recibió los cuidados habituales. La eficacia de la película se midió con la escala Children's Anxiety Meter-State y el miedo con la Children's Fear Scale. Resultados: No hubo diferencias significativas (p > 0,05) entre el grupo de intervención que vio la película y el grupo de control que siguió los cuidados preoperatorios habituales. Conclusión: Es importante evaluar con precisión si los costes de esta intervención compensan los beneficios. Se sugiere seguir investigando en este ámbito, ajustando otros programas que resulten más eficaces en este contexto.

[Analysis of the results of personal monitoring to ionizing radiation at workplaces]. / Analiza wyników rutynowego monitoringu narazenia personelu na promieniowanie jonizujace w miejscach pracy.

BACKGROUND: The paper presents the results of dosimetric measurements routinely performed by the Radiation Protection Department of the Nofer Institute of Occupational Medicine (NIOM) in Lódz in 2022 for people occupationally exposed to X and γ radiation. MATERIAL AND METHODS: The evaluation of the effective dose as part of individual dosimetry was provided using the film or thermoluminescent dosimetry (TLD). Additionally, based exclusively on the TLD method, measurements of the ambient dose equivalent H*(10) and personal dose equivalents Hp(0.07) and Hp(3) were performed. In 2022, the dosimetric service of the Radiological Protection Department of the NIOM covered >30 000 workers employed in >4500 laboratories (mainly health care departments). All measurements were performed in accordance with accredited research procedures (number AB 327). RESULTS: In 2022, the average annual dose of Hp(10) was equal to 0.26 mSv, whereas Hp(0.07) measured using ring and wrist dosimetry was equal to 0.63 mSv and 0.78 mSv, respectively. In turn, the average Hp(3) value was 0.21 mSv. In 2022, there was not a single case of exceeding the annual dose limit among people measured by the NIOM. CONCLUSIONS: The data collected in the "Dosimetry" database of the NIOM and a detailed analysis of annual doses received by people occupationally exposed to ionizing radiation indicate a well-functioning radiological protection system in Poland. Med Pr Work Health Saf. 2024;75(5).

Wafer-Scale Atomic Layer-Deposited TeOx/Te Heterostructure P-Type Thin-Film Transistors.

There is an increasing demand for p-type semiconductors with scalable growth, excellent device performance, and back-end-of-line (BEOL) compatibility. Recently, tellurium (Te) has emerged as a promising candidate due to its appealing electrical properties and potential low-temperature production. So far, nearly all of the scalable production and integration of Te with complementary metal oxide semiconductor (CMOS) technology have been based on physical vapor deposition. Here we demonstrate wafer-scale atomic layer-deposited (ALD) TeOx/Te heterostructure thin-film transistors with high uniformity and integration compatibility. The wafer-scale uniformity of the film is evidenced by spatial Raman mappings and statistical electrical analysis. Furthermore, surface accumulation-induced good ohmic contact has been observed and explained by the unique band alignment of the charge neutrality level inside the Te valence band. These results demonstrate ALD TeOx/Te as a promising p-type semiconductor for monolithic three-dimensional integration in BEOL CMOS applications incorporated with well-established n-type ALD oxide semiconductors.

High-Performing Flexible Mg3Bi2 Thin-Film Thermoelectrics.

With the advances in bulk Mg3Bi2, there is increasing interest in pursuing whether Mg3Bi2 can be fabricated into flexible thin films for wearable electronics to expand the practical applications. However, the development of fabrication processes for flexible Mg3Bi2 thin films and the effective enhancement of their thermoelectric performance remain underexplored. Here, magnetron sputtering and ex-situ annealing techniques is used to fabricate flexible Mg3Bi2 thermoelectric thin films with a power factor of up to 1.59 µW cm-1 K-2 at 60 °C, ranking as the top value among all reported n-type Mg3Bi2 thin films. Extensive characterizations show that ex-situ annealing, and optimized sputtering processes allow precise control over film thickness. These techniques ensure high adhesion of the films to various substrates, resulting in excellent flexibility, with <10% performance degradation after 500 bending cycles with a radius of 5 mm. Furthermore, for the first time, flexible thermoelectric devices are fabricated with both p-type and n-type Mg3Bi2 legs, which achieve an output power of 0.17 nW and a power density of 1.67 µW cm-2 at a very low temperature difference of 2.5 °C, highlighting the practical application potential of the device.

Assessing the therapeutic role of trehalose and hyaluronic acid: implications for patient care.

OBJECTIVE: This Systematic review aims to assess the efficacy of trehalose and hyaluronic acid in enhancing ocular recovery post-cataract surgery, focusing on their impact on tear film stability, ocular surface integrity, and patient-reported outcomes. METHODS: A comprehensive search was conducted across MEDLINE, PubMed, and Cochrane Library databases to identify randomized controlled trials investigating the efficacy of trehalose, hyaluronic acid, or their combination in post-cataract surgery care. The inclusion criteria focused on peer-reviewed studies in English, detailing outcomes relevant to ocular recovery such as tear film stability, ocular surface integrity, patient-reported discomfort, or visual acuity (VA). The quality of the included studies was assessed using the Cochrane Risk of Bias Tool and synthesized the data qualitatively. RESULTS: Four qualitative investigations met the inclusion criteria. The studies collectively assessed the efficacy of a 3% trehalose and 0.15% hyaluronic acid eye drop solution in reducing postoperative eye symptoms compared to various control solutions. Parameters measured included tear break-up time (TBUT), Fluorescein staining, tear production (Schirmer test), and Ocular Surface Disease Index (OSDI) scores. The results indicated significant improvements in tear film stability and ocular surface health for the treatment groups compared to controls, with a notable decrease in patient-reported discomfort. The study showed an improvement of - 18 (± 14.6) in the treatment group compared to - 7 (± 8.0) in the control group for OSDI. For TBUT, the treatment group improved by 3 (± 1.2) s, whereas the control group improved by 0.3 (± 0.71) s. VA, measured on a scale of 0-100, increased to 17 (± 0.7) in the treatment group compared to 15 (± 1.1) in the control group. CONCLUSIONS: Trehalose and hyaluronic acid may be beneficial in the postoperative period by enhancing tear film stability and ocular surface health. While the results are promising, further research is needed to confirm these findings, understand the mechanisms of action, and explore broader applications.

Room-Temperature Flexible CNT/Fe2O3 Film Sensor for ppb-Level H2S Detection.

Carbon nanotubes (CNTs) had room temperature response, large surface area, and excellent mechanical properties, making them favorable for the design of flexible, wearable, and portable gas sensors. However, CNTs were lacking in response and selective response to different gases, such as H2S. Here, we demonstrated a flexible H2S ppb-level gas sensor based on a carbon nanotube/amorphous Fe2O3 (CNT/Fe2O3) film at room temperature, which was fabricated via a simple one-step solvent-thermal method. The CNT/Fe2O3 film gas sensor exhibited a high selective response to H2S (with a response of 55.1% to 100 ppb H2S), rapid reversible response at room temperature (with a response time of ∼127 s to 100 ppb H2S), and low limit of detection to about 2 ppb. Additionally, the CNT/Fe2O3 film maintained good sensing performance under various bending conditions and could be further fabricated into the fiber gas sensor device via wet stretching, retaining response at the ppb level (with a response of 18.6% to 100 ppb H2S). This research on a flexible gas sensor device based on the CNT film/fiber opened up new possibilities for wearable portable electronic device applications.

Characterization of ultrasonic-assisted antifungal film loaded with fermented walnut meal on Rosa roxburghii Tratt during near-freezing temperature storage.

Fermented walnut meal (FW) has antifungal activity against Penicillium victoriae, a fungus responsible for Rosa roxbughii Tratt spoilage. This study characterized and applied ultrasonic-assisted antifungal film loaded with FW to preserve R. roxbughii Tratt during near-freezing temperature (NFT). Results showed that O2 and CO2 transmission rates decreased by 80.02% and 29.05%, respectively, and antimicrobial properties were improved with ultrasound at 560 W for 5 min and 1% FW. Fourier transform infrared spectroscopy and X-ray diffraction results revealed ultrasound improved hydrogen bonds and inductive effect via ─NH, ─OH, and C═O bonds. The addition of FW led to the formation of CMCS-GL-FW polymer via C═O bond. Thermogravimetric analysis and transmission electron microscope results demonstrated thermal degradation process was decomposed by ultrasound, and the internal structure of P. victoriae was accelerated by the addition of FW. Compared to the U-CMCS/GL group, the vitamin C content, peroxidase, and catalase activities of U-CMCS/GL/FW were enhanced by 4.24%, 8.52%, and 14.3% during NFT (-0.8 to -0.4°C), respectively. Particularly, the fungal count of the U-CMCS/GL/FW group did not exceed 105 CFU g-1 at the end of storage, and the relative abundance of P. victoriae decreased to 0.007%. Our findings provide an effective route for agricultural waste as natural antifungal compounds in the active packaging industry. PRACTICAL APPLICATION: In this study, the barrier and antimicrobial properties of film were successfully improved by ultrasonic treatment and loaded fermented walnut meal. The ultrasonic-assisted antifungal film loaded with fermented walnut meal effectively delayed the degradation of nutrients and reduced microbial invasion of Rosa roxburghii Tratt. These results provide a theoretical basis for the application of agricultural waste in the food packaging industry.

Effects of film-forming components on the viability of probiotics and the application of synbiotic pectin film in preserving Da Xanh pomelo and Thai jackfruit fresh-cut.

Minimally processed products are highly convenient, and fresh-cut fruits coated with the synbiotic film have many advantages. This study investigated the film-forming components and preservation ability of Da Xanh pomelo and Thai jackfruit fresh-cut by synbiotic pectin film. The results showed that PA70 film combined with 1.5% FOS (fructooligosaccharides) had the highest number of viable cells of L. plantarum after 30 days of storage at 5 °C. The number of probiotic cells existing on fresh-cut products of Da Xanh pomelo and Thai jackfruit was always high (> 8 log CFU/g) and stable during 10 days of storage. In addition, jackfruit and pomelo fresh-cut preserved with probiotic film also showed probiotic activity in simulated stomach and small intestine medium with the number of probiotic cells (> 6 log CFU/g) and survival cell ratio after 4 h in small intestine medium reached 81.20 ± 0.92% (pomelo) and 82.16 ± 0.94% (Thai jackfruit).

Silk films with distinct surface topography modulate plasma membrane curvature to polarize macrophages.

The physical properties of a biomaterial play a vital role in modulating macrophage polarization. However, discerning the specific effects of individual parameters can be intricate due to their interdependencies, limiting the mechanism underlying a specific parameter on the polarization of macrophages. Here, we engineered silk fibroin (SF) films with tunable surface roughness while maintaining similar physical properties by combining casting and salting out techniques. We demonstrate that increased surface roughness in SF films promotes M2-like macrophage polarization, characterized by enhanced secretion of anti-inflammatory cytokines. Transcriptomic analysis unveils the modulation of genes associated with extracellular matrix-cell interactions, highlighting the role of surface topography in regulating cellular processes. Mechanistically, we show that surface roughness induces macrophage membrane curvature, facilitating integrin αv endocytosis and thereby inhibiting the integrin-NF-kB signaling pathway. In vivo implantation assays corroborate that rough SF films substantially mitigate early inflammatory responses. This work establishes a direct link between surface roughness and intracellular signaling in macrophages, adding to our understanding of the biomaterial surface effect at the material-cell interface and bringing insights into material design.

Antibacterial evaluation of garlic extracts on chitosan/starch packaging film using response surface methodology and its application for shelf-life extension of bell peppers (Capsicum annuum).

In this study, garlic extract (GE) was assessed as a potential additive in chitosan/starch (Ch/De) coatings, focusing on phenolic and flavonoid content analyses and antibacterial properties. Using response surface methodology approach, an optimization method was employed to achieve the optimal antibacterial formulation, with Ch, De, and GE identified as key variables in the Design of Experiment. Fourier transform infrared spectroscopy and X-ray diffraction analyses elucidated interactions among these primary components within the films, while thermogravimetric analysis confirmed the enhanced thermal stability of GE-coated film formulations (Ch/De/GE). The Ch/De/GE exhibited antibacterial efficacy against Escherichia coli (ATCC 25922) with an inhibition zone of 7.2 mm at optimized concentrations of 2% w/v Ch, 1.5% w/v starch, and 0.5% v/v GE. In silico molecular docking studies provided insights into GE's inhibitory role as an antibacterial agent. Evaluation of green and yellow bell peppers (Capsicum annuum) over 18 days showed that coated peppers maintained better visual appearance and mass stability, with a weight loss decrease of 40.54%-48.96%, compared to uncoated ones. Additionally, the Ch/De/GE coating effectively inhibited bacterial growth, reducing it by 1-1.23 log CFU, during the storage period. In conclusion, the Ch/De/GE coating effectively extends the shelf-life of bell peppers and maintains their quality, demonstrating its potential for use in food packaging to preserve perishable items. PRACTICAL APPLICATION: The optimized chitosan/starch/garlic extract (Ch/De/GE) film developed in this study shows promising potential for application in the food packaging industry, particularly in extending the shelf life of perishable items like bell peppers. Its enhanced antibacterial properties, along with its ability to maintain visual appearance and reduce weight loss, make it an effective natural preservative that could replace synthetic additives in food packaging. By incorporating this biodegradable film into packaging solutions, producers can offer safer, more sustainable products that meet consumer demand for natural and environmentally friendly options.

High-Performance AgSbTe2 Thermoelectrics: Advances, Challenges, and Perspectives.

Environmental-friendless and high-performance thermoelectrics play a significant role in exploring sustainable clean energy. Among them, AgSbTe2 thermoelectrics, benefiting from the disorder in the cation sublattice and interface scattering from secondary phases of Ag2Te and Sb2Te3, exhibit low thermal conductivity and a maximum figure-of-merit ZT of 2.6 at 573 K via optimizing electrical properties and addressing phase transition issues. Therefore, AgSbTe2 shows considerable potential as a promising medium-temperature thermoelectric material. Additionally, with the increasing demands for device integration and portability in the information age, the research on flexible and wearable AgSbTe2 thermoelectrics aligns with contemporary development needs, leading to a growing number of research findings. This work provides a detailed and timely review of AgSbTe2-based thermoelectrics from materials to devices. Principles and performance optimization strategies are highlighted for the thermoelectric performance enhancement in AgSbTe2. The current challenges and future research directions of AgSbTe2-based thermoelectrics are pointed out. This review will guide the development of high-performance AgSbTe2-based thermoelectrics for practical applications.

Enhanced pH-sensitive anthocyanin film based on chitosan quaternary ammonium salt: A promising colorimetric indicator for visual pork freshness monitoring.

An intelligent pH response indicator film is an easy-to-use device for the real-time monitoring of meat freshness during transport and storage. Therefore, a novel pH-sensitive anthocyanin indicator film composed of polyvinyl alcohol-blueberry anthocyanin (BA)-2-hydroxypropyltrimethyl ammonium chloride chitosan (HACC) called PAH-2.0 with 1.2 mg/mL HACC to monitor meat freshness using HACC as the colorimetric enhancer has been developed. BA and HACC were mixed and immobilized in the polyvinyl alcohol matrix by hydrogen bonds, as confirmed via Fourier-transform infrared spectroscopy and X-ray diffraction. The inclusion of HACC improved the color stability and antioxidant and antibacterial properties of the PAH-2.0 film. When applied to pork for freshness monitoring at 4 °C, three freshness stages, including fresh, sub-fresh, and spoiled, could be clearly distinguished based on the color variations of the PAH-2.0 film. The distinct hierarchical color change from purple to blue-violet and finally to grayish-blue was highly correlated with the indicators of pork freshness: pH values, total volatile basic nitrogen, and total viable count. This study provides a simple and promising approach for fabricating meat freshness indicator films with high color recognition accuracy, thereby offering new possibilities for visual meat freshness monitoring.

Tear Film Hyperosmolarity is Associated with Increased Variation of Light Scatter Following Cataract Surgery.

Purpose: To study the association between tear film hyperosmolarity and ocular light scatter in a cataract surgery population. Patients and Methods: Contiguous, 20-second objective scatter index (OSI) scans were recorded in hyperosmolar (≥320 mOsm/L) and normal subjects (<308 mOsm/L) with cataract nuclear opacity ≥3. OSI was measured at screening, baseline and 90 days following surgery. Along with symptoms of ocular surface disease, slit-lamp examination included corneal staining (0-3), tear film breakup time (TBUT) and evaluation of meibomian gland disease (MGD). An additional cohort of hyperosmolar subjects were measured for OSI at screening, baseline, and 5, 10, 15 and 30 minutes following instillation of 0.18% sodium hyaluronate (HA). Results: Thirty-one eyes of 31 patients were included. There was a significant difference in post-operative OSI variation when comparing hyperosmolar (0.65±0.30, N=11) to normal subjects (0.33±0.11, N=10, p=0.005). Of note, there were no significant differences in OSI variation when subjects were sorted by staining (p=0.9), TBUT (p=0.7), symptoms (p=0.7), or MGD status (p=0.9). Instillation of 0.18% HA (N=10) did not alter OSI at 5 minutes, but significant reductions in OSI of 28.8%, 38.5% and 36.7% (all p < 0.001) were observed at 10, 15 and 30 minutes. Conclusion: Hyperosmolar patients exhibited significantly increased variation in light scatter following cataract surgery that was undifferentiated by staining or TBUT. Elevated osmolarity may be indicative of light scatter equivalent to that of a grade 2-3 cataract.

On the importance of crystal structures for organic thin film transistors.

Historically, knowledge of the molecular packing within the crystal structures of organic semiconductors has been instrumental in understanding their solid-state electronic properties. Nowadays, crystal structures are thus becoming increasingly important for enabling engineering properties, understanding polymorphism in bulk and in thin films, exploring dynamics and elucidating phase-transition mechanisms. This review article introduces the most salient and recent results of the field.

Improved Liver Intravital Microscopic Imaging Using a Film-Assisted Stabilization Method.

Intravital microscopy (IVM) is a valuable method for biomedical characterization of dynamic processes, which has been applied to many fields such as neuroscience, oncology, and immunology. During IVM, vibration suppression is a major challenge due to the inevitable respiration and heartbeat from live animals. In this study, taking liver IVM as an example, we have unraveled the vibration inhibition effect of liquid bridges by studying the friction characteristics of a moist surface on the mouse liver. We confirmed the presence of liquid bridges on the liver through fluorescence imaging, which can provide microscale and nondestructive liquid connections between adjacent surfaces. Liquid bridges were constructed to sufficiently stabilize the liver after abdominal dissection by covering it with a polymer film, taking advantage of the high adhesion properties of liquid bridges. We further prototyped a microscope-integrated vibration-damping device with adjustable film tension to simplify the sample preparation procedure, which remarkably decreased the liver vibration. In practical application scenarios, we observed the process of liposome phagocytosis by liver Kupffer cells with significantly improved image and video quality. Collectively, our method not only provided a feasible solution to vibration suppression in the field of IVM, but also has the potential to be applied to vibration damping of precision instruments or other fields that require nondestructive ″soft″ vibration damping.

Preparation and Keep-Refreshing Effect of Chitosan/Sea Buckthorn Polysaccharide Composite Film on the Preservation of Yellow Cherry Tomatoes.

In this study, sea buckthorn polysaccharides (SBP) were added as functional substances to chitosan (CS), and chitosan/sea buckthorn polysaccharide (SCS) composite films were prepared using the casting method. The effects of SBP addition on the optical properties, physical properties, mechanical properties, structure, antioxidant activity, and antibacterial activity of the SCS composite films were studied, and the prepared SCS composite films were used to preserve yellow cherry tomatoes. The results showed that SCS composite films exhibited good UV resistance, water solubility, and antioxidant activity, but its apparent structure, hydrophobicity, and mechanical properties needed further improvement. Meanwhile, SBP has inhibitory effects on all 8 experimental strains. In addition, the SCS composite film with the addition of 200 mg/L SBP could reduce the weight loss rate of yellow cherry tomatoes, maintain hardness, delay the decrease of total soluble solids, titratable acid, and Vitamin C content, and inhibit the accumulation of malondialdehyde. SCS composite films are beneficial for enhancing the quality of yellow cherry tomatoes during storage, and their application in fruit and vegetable preservation has development prospects.

Preparation and properties of PCL coaxial electrospinning films with shell loaded with CEO and core coated LEO nanoemulsions.

During storage and transportation, the reduction of microbial contamination and management of the exudation of fluids from the fish can effectively mitigate spoilage and degradation of fish fillets. In this work, the coaxial electrospinning films loaded with natural plant preservatives, namely laurel essential oil (LEO) and clove essential oil (CEO), were prepared by the coaxial electrospinning method synergistic with nanoemulsion techniques, and the hydrophilic preservation pads were prepared. The morphology of the film fiber is clear, without beads or damage, with fiber diameters falling within the 230-260 nm range. It has a distinct core-shell structure, exceptional thermal stability, and strong antibacterial and antioxidant properties. The core-shell structure of the fiber subtly regulates the release of preservatives and significantly improves the utilization efficiency. At the same time, the synergistic use of two essential oils can reduce the amount while amplifying their effectiveness. The pads significantly slowed down the increase of key indicators of spoilage, such as total viable count (TVC), pH, thiobarbituric acid reactive substances (TBA), and total volatile base nitrogen (TVB-N), during the storage of the fish fillets. Furthermore, the pads effectively slowed down the decline in water-holding capacity, the deterioration of textural qualities, and the negative changes in the microstructure of the fish muscle. Ultimately, the pads notably delayed the spoilage of fish fillets, extending their shelf life from 5 d to 9 d. The efficient utilization of biological preservatives in this film can provide technical support for the development of food preservation materials.