Intraoperative live measurement of femoral head size for acetabular cup sizing: simple, accurate, and green!

PURPOSE: Templating is the first step in achieving a successful total hip arthroplasty. We hypothesize that native head size is highly correlated with implanted cup size. Therefore, the purpose of this study is to look for a correlation between sizes of the intra-operative measurement of the femoral head and the implanted cup. METHODS: This is a monocentric observational study conducted from December 2018 till January 2023. All patients admitted for a primary total hip arthroplasty were included and retrospectively reviewed. Intra-operative femoral head measurement, radiographic femoral head diameter, templated (planned) cup size, and definitive implanted cup size were recorded. RESULTS: The sample included 154 patients (85 female and 69 males) with a mean age of 66.2 ± 10.4 years. There were 157 THA cases; 82 on the right side and 75 on the left side. The native head size and acetate template on digital radiographs were the most significantly positively correlated with cup size (P < 0.0001) while the radiological head size was significantly negatively correlated with cup size (P = 0.009). The implanted cup was on average 2 ± 2 mm bigger than the native head size measured intra-operatively. CONCLUSION: The native femoral head diameter measured intra-operatively is a simple and reliable tool to help the surgeons choose the proper size of the acetabular cup, preventing complications during surgery hence optimizing results post operatively. This technique would contribute to a more ecofriendly orthopaedic reconstructive surgery.

Genetic variants for head size share genes and pathways with cancer.

The size of the human head is highly heritable, but genetic drivers of its variation within the general population remain unmapped. We perform a genome-wide association study on head size (N = 80,890) and identify 67 genetic loci, of which 50 are novel. Neuroimaging studies show that 17 variants affect specific brain areas, but most have widespread effects. Gene set enrichment is observed for various cancers and the p53, Wnt, and ErbB signaling pathways. Genes harboring lead variants are enriched for macrocephaly syndrome genes (37-fold) and high-fidelity cancer genes (9-fold), which is not seen for human height variants. Head size variants are also near genes preferentially expressed in intermediate progenitor cells, neural cells linked to evolutionary brain expansion. Our results indicate that genes regulating early brain and cranial growth incline to neoplasia later in life, irrespective of height. This warrants investigation of clinical implications of the link between head size and cancer.

Humeral head size predicts baseplate lateralization in reverse shoulder arthroplasty: a comparative computer model study.

Background: In reverse shoulder arthroplasty (RSA), the ideal combination of baseplate lateralization (BL), glenosphere size (GS), and glenosphere overhang (GOH) with a commonly used 145° neck shaft angle (NSA) is unclear. This is the first study evaluating correlations of body height (BH), humeral head size (HS), glenoid height (GH), and association of gender with best glenoid configurations for range of motion (ROM) maintaining anatomic lateralization (aLAT) for optimized muscle length in 145° and less distalized 135° RSA. Methods: In this computer model study, 22 computed tomographies without joint narrowing were analyzed (11 male/female). A standardized semi-inlay 145° platform stem was combined with 20 glenoid configurations (baseplate [B] 25, 25 + 3/+6 lateralized [l], 29, 29 + 3/6l combined with glenosphere 36, 36 + 2 eccentric [e], 36 + 3l, 39, 39 + 3e, 39 + 3l , 42, 42 + 4e). Abduction-adduction, flexion-extension, external rotation-internal rotation, total ROM (TROM), and total notching relevant (TNR) ROM were computed, best TROM models respecting aLAT (-1 mm to +1 mm) and HS/GH recorded. Second, the 145° models (Ascend Flex stem; Stryker, Kalamazoo, MI, USA) were converted and compared to a 135° inlay RSA (New Perform stem; Stryker, Kalamazoo, MI, USA) maintaining GOH (6.5-7 mm) and aLAT. Results: Best 145° models had eccentric glenospheres (mean BL: 3.5 mm, GOH 8.8 mm, GS 38.1 mm, distalization 23 mm). The 135° models had concentric glenospheres, mean BL 3.8 mm, GOH 6.9 mm, GS 39.7 mm, and distalization 14.1 mm. HS showed the strongest positive correlation with BL in 145° and 135° models (0.65/0.79). Despite reduced GOH in smaller females with a 135° NSA, adduction, external rotation, extension, TNR ROM, and TROM were significantly increased (P = .02, P = .005, P = .005, P = .004, P = .003), abduction however reduced (P = .02). The same trends were seen for males. Conclusion: HS is a practical measure in surgery or preoperatively, and the strong positive correlation with BL is a useful planning aid. Despite reduction of GOH, conversion to a less distalized 135° NSAinlay design is powerful to maintain and even significantly increase all components of TNR ROM (extension/external rotation/adduction) in small females with the drawback of reduced abduction which may however be compensated by scapula motion. Lateralization with a less distalized 135° RSA optimizes muscle length, may facilitate subscapularis repair, and maintains highest rigid body motion.

Increasing femoral head size from 32 mm to 36 mm does not increase the revision risk for total hip replacement: a New Zealand joint registry study.

BACKGROUND: The use of larger femoral heads in total hip replacement (THR) has increased over the last decade. While the relationship between increasing head size and increased stability is well known, the risk of revision with increasing head size remains poorly understood. The aim of this study was to compare the outcome of total hip joint replacement with 32-mm and 36-mm heads. METHODS: We carried out a 20-year retrospective analysis of prospective data from the New Zealand Joint Registry (NZJR). All primary total hip replacements registered between January 1999 and December 2018 were included. We compared the rate of revision of 32-mm and 36-mm heads in THR. Sub-group analysis included comparisons of bearing type and all-cause revision. RESULTS: 60,051 primary THRs met our inclusion criteria. The revision rate per 100 component years was significantly higher with a 36-mm head than with a 32-mm head (0.649 vs. 0.534, p < 0.001). Subgroup analysis of bearing type showed no significant differences in revision rates for all combinations of 36-mm heads when compared to 32-mm (p = 0.074-0.92), with the exception of metal-on-metal (MoM); p = 0.038. When MoM was removed there was no significant difference in revision rates per 100 component years between 32-mm and 36-mm heads, 0.528 versus 0.578 (p = 0.099). CONCLUSIONS: Increasing head size from 32 mm to 36 mm results in no significant increase in revision in all bearing combinations except MoM.

Dual Mobility Articulation in Revision Total Hip Arthroplasty: An American Joint Replacement Registry Analysis of Patients Aged 65 Years and Older.

BACKGROUND: Increasingly, dual mobility (DM) articulations have been used in revision total hip arthroplasty (THA), which may prevent postoperative hip instability. The purpose of this study was to report on outcomes of DM implants used in revision THA from the American Joint Replacement Registry (AJRR). METHODS: Revision THA cases performed between 2012 and 2018 Medicare were eligible and categorized by 3 articulations: DM, ≤32 mm, and ≥36 mm femoral heads. The AJRR-sourced revision THA cases were linked to Centers for Medicare and Medicaid Services (CMS) claims data to supplement (re)revision cases not captured in the AJRR. Patient and hospital characteristics were described and modeled as covariates. Using multivariable Cox proportional hazard models, considering competing risk of mortalities, hazard ratios were estimated for all-cause re-revision and re-revision for instability. Of 20,728 revision THAs, 3,043 (14.7%) received a DM, 6,565 (31.7%) a ≤32 mm head, and 11,120 (53.6%) a ≥36 mm head. RESULTS: At 8-year follow-up, the cumulative all-cause re-revision rate for ≤32 mm heads was 21.9% (95%-confidence interval (CI) 20.2%-23.7%) and significantly (P < .0001) higher than DM (16.5%, 95%-CI 15.0%-18.2%) and ≥36 mm heads (15.2%, 95%-CI 14.2%-16.3%). At 8-year follow-up, ≥36 heads had significantly (P < .0001) lower hazard of re-revision for instability (3.3%, 95%-CI 2.9%-3.7%) while the DM (5.4%, 95%-CI 4.5%-6.5%) and ≤32 mm groups (8.6%, 95%-CI 7.7%-9.6%) had higher rates. CONCLUSION: The DM bearings are associated with lower rates of revision for instability compared to patients who had ≤32 mm heads and higher revision rates for ≥36 mm heads. These results may be biased due to unidentified covariates associated with implant selection.

Influence of radiation exposure to delayed fetal growth in wild Japanese monkeys after the Fukushima accident.

Wild Japanese monkeys (Macaca fuscata) were exposed to radiation after the Fukushima Daiichi nuclear accident in 2011. To clarify the biological effects of radiation exposure on their fetal growth, pregnant monkeys and their fetuses were analyzed. These animals were collected between 2008 and 2020 (before and after the accident in 2011) living in Fukushima City, approximately 70 km from the nuclear power plant. Multiple regression analyses were conducted with fetal body weight (FBW) and fetal head circumference (FHS) as objective variables, and maternal and fetal factors as explanatory variables. The maternal factors were relative exposure dose rate (REDR), age, body weight, body length, fat index, and parity. The fetal factors were crown ramp length (CRL) and sex. Multiple regression analyses showed that FBR and FHS growth were positively associated with CRL, maternal body length, and negatively associated with REDR. Since the relative growth of FBR and FHS to CRL decreased with increasing REDR, radiation exposure due to the nuclear accident may have contributed to the delayed fetal growth observed in Japanese monkeys.

Femoral head size and surgical approach affect dislocation and overall revision rates in total hip arthroplasty: up to 9-year follow-up data of 269,280 procedures in the Dutch Arthroplasty Register (LROI).

BACKGROUND: Femoral head size and surgical approach might affect the revision rate for dislocation and for any other reason after total hip arthroplasty (THA). We penetrated this question based on registry data with up to 9-year follow-up. METHODS: 269,280 primary THAs documented in the Dutch Arthroplasty Registry (LROI) between 2007 and 2019 were included. Revision rates were calculated by competing risk analyses. Multivariable Cox proportional hazard regression ratios (HR) were used for comparison. RESULTS: Revisions for dislocation were rare. They were more frequent after posterolateral (1.4% [95% CI, 1.3-1.5]), compared to straight lateral (0.6% [95% CI, 0.5-0.7]), anterolateral (0.6% [95% CI, 0.5-0.7]) and anterior (0.4% [95% CI, 0.3-0.5]) approach. Larger femoral head size decreased the dislocation revision risk: 1.4% [95% CI, 1.3-1.5) for 22-28-mm heads; 0.9% (95% CI, 0.8-1.0) for 32-mm heads; 0.6% (95% CI, 0.6-0.7) for 36-mm heads. For the anterior approach, the HR for both revision for dislocation (0.3, 95% CI, 0.3-0.4) and any other reason (0.8, 95% CI, 0.8-0.9) were lowest compared to other approaches including posterolateral (HR 1). Revision risk for any other reason was highest with anterolateral (HR 1.3 (95% CI, 1.2-1.4)) and straight lateral approach (1.1 [95% CI, 1.0-1.2]). CONCLUSIONS: The anterior approach might reduce revision rates for both dislocation and all cause revision. Posterolateral approach is associated with a higher risk of dislocation revision but has a lower risk of any other revision. Increasing femoral head size up to 36 mm reduces revision for dislocation and improves overall revision rates for all approaches.

Large Head in Asymptomatic Child: A Subtle Presentation of Connective Tissue Disorder With Spontaneous Significant Intracerebral Bleed.

Three years old boy with reassuring development had presented to the Pediatric Neurology clinic with a referral due to a large head. Occipito-frontal circumference was more than 97th centile with an unremarkable neurological examination. MRI brain exhibited an acute on chronic large right frontoparietal subdural hematoma with prominent mass effect. Consequentially, the hematoma was evacuated by the neurosurgeon. Postoperative recovery stayed satisfactory. Hematology workup showed normal coagulation and clotting factors levels. Whole exome sequencing (WES) study revealed heterozygous variant c.5187G>A p.(Trp1729*) in gene FBN1 - pathogenic for Marfan syndrome. However, this variant has not yet been reported in association with cerebral arteritis/intracerebral bleed. On follow-up, the child remained asymptomatic clinically with static head size. This drags us towards the fact that significant yet asymptomatic spontaneous intracerebral hemorrhage can be an infrequent presentation in pediatrics in regard to connective tissue disorders. Moreover, children with Marfan syndrome having variant c.5187G>A p.(Trp1729*) of gene FBN1 can have a rare presentation with cerebral arteritis or intracerebral bleed.

3D analysis of the distal ulna with regard to the design of a new ulnar head prosthesis.

STUDY DESIGN: A retrospective, single center, data analysis. OBJECTIVE: Persistent pain and instability are common complications after distal ulnar head arthroplasty. One main reason may be the insufficient representation of the anatomical structures with the prosthesis. Some anatomical structures are neglected such as the ulnar head offset and the ulnar torsion which consequently influences the wrist biomechanics. METHODS: CT scans of the ulnae of forty healthy and asymptomatic patients were analyzed in a three-dimensional surface calculation program. In the best fit principle, cylinders were fitted into the medullary canal of the distal ulna and the ulnar head to determine their size. The distance between the central axes of the two cylinders was measured, which corresponds to the ulnar offset, and also their rotational orientation was measured, which corresponds to the ulnar torsion. RESULTS: The mean medullary canal diameter was 5.8 mm (±0.8), and the ulnar head diameter was 15.8 mm (±1.5). The distance between the two cylinder axes was 3.89 mm (±0.78). The orientation of this offset was at an average of 8.63° (±15.28) of supination, reaching from 23° pronation to 32° supination. CONCLUSION: With these findings, a novel ulnar head prosthesis should have different available stem and head sizes but also have an existing but variable offset between these two elements. A preoperative three-dimensional analysis is due to the high variation of offset orientation highly recommended. These findings might help to better represent the patients natural wrist anatomy in the case of an ulnar head arthroplasty. LEVEL OF EVIDENCE: III.

Longitudinal changes in fetal head biometry and fetoplacental circulation in fetuses with congenital heart defects.

INTRODUCTION: Objectives were to analyze changes in fetal cephalic biometry and fetoplacental circulation throughout pregnancy in fetuses with congenital heart defects. MATERIAL AND METHODS: Prospective study conducted on three university tertiary referral hospitals. Fetuses with the diagnosis of isolated congenital heart defects attending between 2014 and 2018 were included. Congenital heart defects were divided into two groups according to the oxygen supply to the central nervous system: group I (expected low placental blood content and low oxygen delivery to the brain) and group II (expected intermediate and high placental blood content). Fetal biometry and Doppler parameters were collected between 25-30 weeks of gestation and 34-40 weeks of gestation and transformed into Z scores. The results were compared with healthy controls. Finally, general linear modeling was performed to analyze repeated measurements. RESULTS: In all, 71 fetuses met the inclusion criteria. Fetuses with congenital heart defects had significantly smaller head (biparietal diameter [p < 0.001], head circumference [p = 0.001]) and abdominal circumference (p < 0.001), and lower estimated fetal weight (p < 0.001) than controls. When analyzing according to congenital heart defects type, head size was significantly smaller in group I compared with group II (p = 0.04). Regarding Doppler parameters, fetuses with congenital heart defects showed higher umbilical artery pulsatility index (p < 0.001) and lower cerebroplacental ratio (p = 0.044) than controls. In group I, umbilical artery pulsatility index was above the 95th centile in 15.4% of fetuses compared with 6.7% in group II and 1.9% in controls (p < 0.001); moreover, middle cerebral artery pulsatility index was below the 5th centile in 5.4% of group I fetuses compared with 0% in group II and 1.2% in controls (p = 0.011). General linear model for two measurements showed significant longitudinal changes in biometric parameters. Growth rate of fetal head through pregnancy (head circumference Z score) was lower in fetuses with congenital heart defects compared with controls (p = 0.043). In group I, the head circumference Z score longitudinal decrease was significantly higher than in group II (p < 0.001). CONCLUSIONS: Fetuses with congenital heart defects are at risk of smaller head size and Doppler changes. Growth rate of fetal head throughout pregnancy is also affected. These findings are mainly associated with cardiac defects with expected low oxygen supply to the central nervous system.

The Effect of Femoral Head Size on Groin Pain in Total Hip Arthroplasty.

BACKGROUND: Although increased femoral head size reduces the risk of instability in total hip arthroplasty (THA), it may lead to iliopsoas irritation and increased anterior groin pain. The purpose of this study is to compare outcomes between non-modular dual-mobility (NDM) implants and small (≤32 mm) and large (≥36 mm) fixed-bearing (FB) constructs. METHODS: A retrospective review of all primary total hip arthroplasties from 2011 to 2021 was conducted at a single, urban academic institution. Patients were separated into 3 cohorts: NDM implant ≤32 mm and FB implant ≥36 mm. Demographics and outcomes such as length of stay, dislocation, and anterior groin pain were assessed. Patients were deemed as having groin pain if they received an iliopsoas injection or had extended physical therapy ordered beyond 3 months postoperatively. RESULTS: There were 178 NDM implants, 936 ≤32-mm FB, and 2,454 ≥36-mm FB implants included. Length of stay significantly differed between the groups (48.4 ± 43.3 vs 63.2 ± 40.6 vs 57.2 ± 38.1 hours; P = .001). Although not statistically significant, the ≥36-mm FB cohort had the highest rate of dislocations (0.6% vs 0.7% vs 0.9%; P = .84). Although no patients with an NDM implant received an iliopsoas injection, 9 patients (0.9%) with a ≤32-mm FB implant and 9 patients (0.4%) with a ≥36-mm implant received an injection (P = .06). However, 18 (10.1%) patients with an NDM implant, 304 (32.5%) patients with a ≤32-mm FB implant, and 355 (14.5%) patients with a ≥36-mm FB implant received extended physical therapy 3 months after surgery (P < .001). CONCLUSION: NDM implants, as well as FB implants with both small and large head sizes are effective at preventing dislocation. NDM implants did not result in an increase in anterior groin pain compared to ≤32-mm and ≥36-mm FB constructs. LEVEL III EVIDENCE: Retrospective cohort study.

Total, hemi, or dual-mobility arthroplasty for the treatment of femoral neck fractures in patients with neurological disease : analysis of 9,638 patients from the Swedish Hip Arthroplasty Register.

AIMS: The aim of this study was to investigate the potentially increased risk of dislocation in patients with neurological disease who sustain a femoral neck fracture, as it is unclear whether they should undergo total hip arthroplasty (THA) or hemiarthroplasty (HA). A secondary aim was to investgate whether dual-mobility components confer a reduced risk of dislocation in these patients. METHODS: We undertook a longitudinal cohort study linking the Swedish Hip Arthroplasty Register with the National Patient Register, including patients with a neurological disease presenting with a femoral neck fracture and treated with HA, a conventional THA (cTHA) with femoral head size of ≤ 32 mm, or a dual-mobility component THA (DMC-THA) between 2005 and 2014. The dislocation rate at one- and three-year revision, reoperation, and mortality rates were recorded. Cox multivariate regression models were fitted to calculate adjusted hazard ratios (HRs). RESULTS: A total of 9,638 patients with a neurological disease who also underwent unilateral arthroplasty for a femoral neck fracture were included in the study. The one-year dislocation rate was 3.7% after HA, 8.8% after cTHA < 32 mm), 5.9% after cTHA (= 32 mm), and 2.7% after DMC-THA. A higher risk of dislocation was associated with cTHA (< 32 mm) compared with HA (HR 1.90 (95% confidence interval (CI) 1.26 to 2.86); p = 0.002). There was no difference in the risk of dislocation with DMC-THA (HR 0.68 (95% CI 0.26 to 1.84); p = 0.451) or cTHA (= 32 mm) (HR 1.54 (95% CI 0.94 to 2.51); p = 0.083). There were no differences in the rate of reoperation and revision-free survival between the different types of prosthesis and sizes of femoral head. CONCLUSION: Patients with a neurological disease who sustain a femoral neck fracture have similar rates of dislocation after undergoing HA or DMC-THA. Most patients with a neurological disease are not eligible for THA and should thus undergo HA, whereas those eligible for THA could benefit from a DMC-THA. Cite this article: Bone Joint J 2022;104-B(1):134-141.

Effect of first-month head-size growth trajectory on cognitive outcomes in preterm infants.

BACKGROUND: To examine whether the patterns of head-size growth trajectory in the first month after birth are associated with different susceptibility to cognitive impairment outcomes at age 24 months. METHODS: This retrospective cohort study included 590 infants of very-preterm survivors born between 2001 and 2016 receiving neurodevelopmental assessment at age 24 months. 403 children were enrolled for analysis after excluding infants with small-for-gestational age and severe brain injury. The head circumference (HC) growth evaluated weekly in the first month after birth compared to the at-birth HC was analyzed using group-based trajectory modeling. Neurocognition outcomes were determined as normal, borderline delay, or impaired using the Bayley Scales of Infant Development. RESULTS: The HC growth dynamics in the first month after birth showed three trajectory patterns: delayed catch-up (31.5%), slow catch-up (54.0%), and fast catch-up (14.5%), which significantly corresponded to different rates of impaired cognition at 19.5%, 6.0%, and 8.5%, respectively (p < 0.001). While 60% of the fast catch-up group had normal cognition, only one-third of the delayed catch-up group showed normal cognition. Three neonatal risk factors, gestational age (p = 0.006), respiratory distress syndrome requiring surfactant therapy (p = 0.012), and hemodynamically significant patent ductus arteriosus requiring intervention (p = 0.047) significantly affected HC growth trajectory patterning that led to cognitive impairment outcomes at follow-up. CONCLUSION: Preterm infants with delayed catch-up of head-size growth in the first month of age is susceptible to cognitive impairment outcome.

A Multivariate Analysis to Predict Total Hip Arthroplasty Dislocation With Preoperative Diagnosis, Surgical Approach, Spinal Pathology, Cup Orientation, and Head Size.

BACKGROUND: There are several risk factors for dislocation after total hip arthroplasty (THA), but few studies include radiographic assessment of implants, with spine pathology and patient characteristics. This study estimates the rate of dislocation by patient gender, age, race/ethnicity, body mass index, Charlson Comorbidity Index, spine pathology, prior spine fusion, levels affected, radiographic Kellgren-Lawrence score of spine osteoarthritis, THA indication, surgical approach, and femoral head size. METHODS: Seventy-six primary THA patients between January 2007 and 2020 with a dislocation were matched on age and gender to subjects without a known history of dislocation using a 2:1 allocation. Univariable and multivariable survival models that account for matched strata were used to estimate the rate of dislocation. RESULTS: Median follow-up of patients at risk for dislocation was 26.48 months (95% confidence interval [CI] 23.75-36.40). On multivariable analysis, patients with an indication other than primary osteoarthritis were 3.69 (95% CI 2.22-6.13, P < .001) times more likely to dislocate than those with osteoarthritis. Patients with a spine pathology were also nominally more likely to dislocate (hazard ratio 1.76, 95% CI 0.97-3.18, P = .06), and patients receiving a posterior surgical approach were 2.74 (95% CI 1.11-6.76, P = .03) times more likely than those receiving a non-posterior approach to dislocate. CONCLUSION: Patients with THA indication other than primary osteoarthritis and receiving a posterior surgical approach, and to a lesser degree spinal pathology, were identified as affecting the rate of dislocation. After correcting for other variables, femoral head size, cup orientation, and patient factors were not predictive. LEVEL OF EVIDENCE: Level IV, case-control study.

Importance of real-time measurement of sperm head morphology in intracytoplasmic sperm injection.

Intracytoplasmic sperm injection (ICSI) is an important technique in male infertility treatment. Currently, sperm selection for ICSI in human assisted reproductive technology (ART) is subjective, based on a visual assessment by the operator. Therefore, it is desirable to develop methods that can objectively provide an accurate assessment of the shape and size of sperm heads that use low-magnification microscopy available in most standard fertility clinics. Recent studies have shown a correlation between sperm head size and shape and chromosomal abnormalities, and fertilization rate, and various attempts have been made to establish automated computer-based measurement of the sperm head itself. For example, a dictionary-learning technique and a deep-learning-based method have both been developed. Recently, an automatic algorithm was reported that detects sperm head malformations in real time for selection of the best sperm for ICSI. These data suggest that a real-time sperm selection system for use in ICSI is necessary. Moreover, these systems should incorporate inverted microscopes (×400-600 magnification) but not the fluorescence microscopy techniques often used for a dictionary-learning technique and a deep-learning-based method. These advances are expected to improve future success rates of ARTs. In this review, we summarize recent reports on the assessment of sperm head shape, size, and acrosome status in relation to fertility, and propose further improvements that can be made to the ARTs used in infertility treatments.

Dislocation after total hip arthroplasty: does head size really matter?

INTRODUCTION: Recent advances in polyethylene and ceramic technologies has allowed us to use larger sized heads without compromising the wear properties of a total hip arthroplasty (THA). 1 benefit of this change has been proposed to be a lower incidence of dislocation. METHODS: We retrospectively evaluated the dislocation rate in 913 THAs performed using the same standardised surgical technique employed by a single team of surgeons at our institution between 1995 and 2015. Patients were assigned to 2 groups: small (⩽28 mm), large diameter heads (⩾36 mm and larger). The cup position was measured and plotted to determine its status according to the Lewinnek's safe zone (15° ± 10° for anteversion, 40° ± 10° for inclination). RESULTS: 16 of the 472 small heads dislocated (3.4%) while 5 of the 441 in large head group (1.1%) (p = 0.04). In all of the large head patients that dislocated the cup position was in the safe range of Lewinnek. However, in the large head group only 64.5% of the cups were in the safe zone. CONCLUSIONS: By changing the head size to 36 mm, we were able to decrease the dislocation rate significantly. Errors of cup positioning according to Lewinnek became oblivious when using large heads. In our opinion, using large heads in THA makes a difference in terms of dislocation.

Posterior approach, fracture diagnosis, and american society of anesthesiology class iii-iv are associated with increased risk of revision for dislocation after total hip arthroplasty: An analysis of 33,337 operations from the finnish arthroplasty register.

BACKGROUND AND OBJECTIVE: Dislocation is one of the most common reasons for revision surgery after primary total hip arthroplasty. Both patient related and surgical factors may influence the risk of dislocation. In this study, we evaluated risk factors for dislocation revision after total hip arthroplasty based on revised data contents of the Finnish Arthroplasty Register. METHODS: We analyzed 33,337 primary total hip arthroplasties performed between May 2014 and January 2018 in Finland. Cox proportional hazards regression was used to estimate hazard ratios with 95% confidence intervals for first dislocation revision using 18 potential risk factors as covariates, such as age, sex, diagnosis, hospital volume, surgical approach, head size, body mass index, American Society of Anesthesiology class, and fixation method. RESULTS: During the study period, there were 264 first-time revisions for dislocation after primary total hip arthroplasty. The hazard ratio for dislocation revision was 3.1 (confidence interval 1.7-5.5) for posterior compared to anterolateral approach, 3.0 (confidence interval 1.9-4.7) for total hip arthroplasties performed for femoral neck fracture compared to total hip arthroplasties performed for osteoarthritis, 2.0 (confidence interval 1.0-3.9) for American Society of Anesthesiology class III-IV compared to American Society of Anesthesiology class I, and 0.5 (0.4-0.7) for 36-mm femoral head size compared to 32-mm head size. CONCLUSIONS: Special attention should be paid to patients with fracture diagnoses and American Society of Anesthesiology class III-IV. Anterolateral approach and 36-mm femoral heads decrease dislocation revision risk and should be considered for high-risk patients.

Evaluation of Extrauterine Head Growth From 14-21 days to Discharge With Longitudinal Intergrowth-21st Charts: A New Approach to Identify Very Preterm Infants at Risk of Long-Term Neurodevelopmental Impairment.

Background: ExtraUterine Growth Restriction (EUGR) is a common definition for in-hospital growth failure of very preterm infants. Wide heterogeneity is found in definitions and anthropometric charts used to describe EUGR. Aim: We aim to compare two traditional definitions of EUGR with a newly proposed one, based on a longitudinal evaluation, that takes into account the physiological period of fluid loss after birth. We also wish to detect which definition could better predict neurodevelopmental impairment at 24 months of corrected age (CA). Methods: A total of 195 infants with GA < 30 were included. EUGR was calculated both for weight and head circumference (HC). Cross-sectional EUGR was defined as measurements < 10th percentile at discharge; longitudinal EUGR was defined as Δz-score < -1 between birth and discharge measurements. The new longitudinal "post-loss" EUGR definition was proposed as Δz-score < -1 between measurements taken at 14-21 days of life and at discharge. Longitudinal postnatal Intergrowth-21st charts specifically built on preterm infants were used. Association with major and minor neurodevelopmental impairment at 24-month CA was assessed for each definition. K coefficient and ROC curve were evaluated. Results: Longitudinal "post-loss" definition of EUGR for HC is the one predicting minor neurodevelopmental impairment at the multivariate analysis (OR = 3.94), and it is also associated with a worse General Quotient. The chosen cut-off (Δz-score < -1) is the proper one. Conclusion: HC in-hospital growth could be a more accurate tool than weight to predict neurodevelopmental outcomes and especially minor neurological impairment. Longitudinal "post-loss" definition of EUGR assessed on longitudinal charts for preterm infants could be the most appropriate definition from the methodological, clinical, and prognostic point of view.

Global diversity in bearings in primary THA.

Choice of articulating materials, head size and the design of the articulation will become decisive for the long-term performance of a total hip arthroplasty (THA) and especially in terms of risk for dislocation and wear-related problems. Here we account for common alternatives based on available studies and the evidence that can be derived from them.Metal or ceramic femoral heads articulating against a liner or cup made of highly cross-linked polyethylene and ceramic-on-ceramic articulations have about similar risk for complications leading to revision, whereas the performance of metal-on-metal articulations, especially with use of big heads, is inferior. The clinical significance of problems related to ceramic-on-ceramic articulations such as squeaking remains unclear. With use of current technology ceramic fractures are rare.Large femoral heads have the potential to increase the range of hip movement before impingement occurs and are therefore expected to reduce dislocation rates. On the other hand, issues related to bearing wear, corrosion at the taper-trunnion junction and groin pain may arise with larger heads and jeopardize the longevity of THA. Based on current knowledge, 32-mm heads seem to be optimal for metal-on-polyethylene bearings. Patients with ceramic-on-ceramic bearings may benefit from even larger heads such as 36 or 40 mm, but so far there are no long-term reports that confirm the safety of bearings larger than 36 mm.Assessment of lipped liners is difficult because randomized studies are lacking, but retrospective clinical studies and registry data seem to indicate that this liner modification will reduce the rate of dislocation or revision due to dislocation without clear evidence of clinically obvious problems due to neck-liner impingement.The majority of studies support the view that constrained liners and dual mobility cups (DMC) will reduce the risk of revision due to dislocation both in primary and revision THA, the latter gaining increasing popularity in some countries. Both these devices suffer from implant-specific problems, which seem to be more common for the constrained liner designs. The majority of studies of these implants suffer from various methodological problems, not least selection bias, which calls for randomized studies preferably in a multi-centre setting to obtain sufficient power. In the 2020s, the orthopaedic profession should place more effort on such studies, as has already been achieved within other medical specialties, to improve the level of evidence in the choice of articulation when performing one of the most common in-hospital surgical procedures in Europe. Cite this article: EFORT Open Rev 2020;5:763-775. DOI: 10.1302/2058-5241.5.200002.

Does the Femoral Head Size Influence Outcomes After Uncemented Total Hip Arthroplasty for Fused Hips? A Prospective Study in Ankylosing Spondylitis.

BACKGROUND: Uncemented total hip arthroplasty (THA) with large size femoral heads have shown greater advantage with good stability, range of motion and decreased dislocation rate in ankylosing spondylitis (AS). Meticulous planning is needed to address the unique surgical challenges in such patients with fused hip and spinal deformity. MATERIALS AND METHODS: Thirty fivefused hip joints in twenty-five AS patients who underwent uncemented THA (April 2014 to December 2016) were included in our prospective study and were followed up for a minimum period of 36 months. Pain relief, functional improvement and patient satisfaction were statistically assessed using "Visual Analogue Score" (VAS), "Harris Hip Score" (HHS) and "AJRI 10-Point Satisfaction Score" (A10PSS), respectively. RESULTS: The overall mean preoperative VAS improved from 6.9 ± 1.5 to 1.5 ± 1, HHS improved from 50.0 ± 12 to 88.4 ± 7.8 and A10PSS improved from 2.2 ± 1.2 to 7.6 ± 0.8. Our study results were significant with zero dislocation and good functional score in comparison to the other available studies in literature. First subdivision study in AS patients with bilateral THA performed better than unilateral THA. Second subdivision study showed no significant statistical difference in terms of VAS, HHS, A10PSS and dislocation rate in relation to femoral head size between 32 mm, 36 mm and 40 mm. CONCLUSION: Uncemented THA with large size femoral head equal or greater than 32 mm provides better stability and good functional outcome with less dislocation rate in comparison to older studies of literature with femoral head size less than 32 mm. LEVEL OF EVIDENCE: A Level II study. (Data collected from the ongoing prospective study) (https://www.spine.org/Documents/LevelsofEvidenceFinal.pdf).