Poly(ester imide)s with Low Linear Coefficients of Thermal Expansion and Low Water Uptake (VIII): Structure-Flame Retardancy Relationship.

A series of ester-linked tetracarboxylic dianhydrides containing multiple para-phenylene units (TA-pPhs) was synthesized to obtain novel modified polyimides, namely poly(ester imide)s (PEsIs). The flame retardancy and film toughness of PEsIs tended to deteriorate with the structural extension of the repeating units (or monomers) via ester groups. To identify the structural factors necessary for achieving the highest flame retardancy rank (UL-94, V-0), we systematically investigated the structure-property relationships of a series of TA-pPh-based PEsIs. Among them, a PEsI derived from para-quaterphenylene-containing TA-pPh (TA-DPQP) and p-phenylenediamine (p-PDA) exhibited the best property combination, featuring an extremely high glass transition temperature (Tg), very low linear coefficient of thermal expansion (CTE), low water uptake (WA), ultralow linear coefficient of humidity (hygroscopic) expansion (CHE), unexpectedly high film toughness, and excellent flame retardancy (V-0 rank). Moreover, we examined the effects of substituents of TA-pPh and discussed the mode of action for the increased film toughness. This study also investigated the structure-property relationship for a series of PEsIs derived from isomeric naphthalene-containing tetracarboxylic dianhydrides. Some of the PEsIs obtained in this study, such as the TA-DPQP/p-PDA system, hold promise as novel high-temperature dielectric substrates for use in flexible printed circuits.

n-Bu4NI/K2S2O8-MEDIATED C-N COUPLING BETWEEN ALDEHYDES AND AMIDES.

n-Bu4NI/K2S2O8 mediated C-N coupling between aldehydes and amides is reported. A strong electronic effect is observed on the aromatic aldehyde substrates. The transformylation from aldehyde to amide takes place exclusively when an aromatic aldehyde bears electron-donating groups at either the ortho or para position of the formyl group, while the cross-dehydrogenative coupling dominates in the absence of these groups. Both the density functional theory (DFT) thermochemistry calculations and experimental data support the proposed single electron transfer mechanism with the formation of an acyl radical intermediate in the cross-dehydrogenative coupling. The n-Bu4NI/K2S2O8 mediated oxidative cyclization between 2-aminobenzamide and aldehydes is also reported, with four quinazolin-4(3H)-ones prepared in 65-99% yields.

Modeling of Effectiveness of N3-Substituted Amidrazone Derivatives as Potential Agents against Gram-Positive Bacteria.

Prediction of the antibacterial activity of new chemical compounds is an important task, due to the growing problem of bacterial drug resistance. Generalized linear models (GLMs) were created using 85 amidrazone derivatives based on the results of antimicrobial activity tests, determined as the minimum inhibitory concentration (MIC) against Gram-positive bacteria: Staphylococcus aureus, Enterococcus faecalis, Micrococcus luteus, Nocardia corallina, and Mycobacterium smegmatis. For the analysis of compounds characterized by experimentally measured MIC values, we included physicochemical properties (e.g., molecular weight, number of hydrogen donors and acceptors, topological polar surface area, compound percentages of carbon, nitrogen, and oxygen, melting points, and lipophilicity) as potential predictors. The presence of R1 and R2 substituents, as well as interactions between melting temperature and R1 or R2 substituents, were also considered. The set of potential predictors also included possible biological effects (e.g., antibacterial, antituberculotic) of tested compounds calculated with the PASS (Prediction of Activity Spectra for Substances) program. Using GLMs with least absolute shrinkage and selection (LASSO), least-angle regression, and stepwise selection, statistically significant models with the optimal value of the adjusted determination coefficient and of seven fit criteria were chosen, e.g., Akaike's information criterion. The most often selected variables were as follows: molecular weight, PASS_antieczematic, PASS_anti-inflam, squared melting temperature, PASS_antitumor, and experimental lipophilicity. Additionally, relevant to the bacterial strain, the interactions between melting temperature and R1 or R2 substituents were selected, indicating that the relationship between MIC and melting temperature depends on the type of R1 or R2 substituent.

Poly(ester imide)s with Low Linear Coefficients of Thermal Expansion and Low Water Uptake (VII): A Strategy to Achieve Ultra-Low Dissipation Factors at 10 GHz.

In this study, a series of ester-linked tetracarboxylic dianhydrides (TCDAs) with 2,6-naphthalene-containing longitudinally extended structures consisting of different numbers of aromatic rings (NAr = 6-8) was synthesized to obtain novel modified polyimides, poly(ester imide)s (PEsIs). These TCDAs were fully compatible with the conventional manufacturing processes of conventional polyimide (PI) systems. As an example, the PEsI film obtained from the ester-linked TCDA (NAr = 8) and an ester-linked diamine achieved unprecedented outstanding dielectric properties without the support of fluorinated monomers, specifically an ultra-low dissipation factor (tan δ) of 0.00128 at a frequency of 10 GHz (50% RH and 23 °C), in addition to an extremely high glass transition temperature (Tg) of 365 °C, extremely low linear coefficient of thermal expansion (CTE) of 6.8 ppm K-1, suppressed water uptake (0.24%), requisite film ductility, and a low haze. Consequently, certain PEsI films developed in this study are promising candidates for heat-resistant dielectric substrates for use in 5G-compatible high-speed flexible printed circuit boards (FPCs). The chemical and physical factors denominating tan δ are also discussed.

Single-Atoms on Crystalline Carbon Nitrides for Selective C─H Photooxidation: A Bridge to Achieve Homogeneous Pathways in Heterogeneous Materials.

Single-atom catalysis is a field of paramount importance in contemporary science due to its exceptional ability to combine the domains of homogeneous and heterogeneous catalysis. Iron and manganese metalloenzymes are known to be effective in C─H oxidation reactions in nature, inspiring scientists to mimic their active sites in artificial catalytic systems. Herein, a simple and versatile cation exchange method is successfully employed to stabilize low-cost iron and manganese single-atoms in poly(heptazine imides) (PHI). The resulting materials are employed as photocatalysts for toluene oxidation, demonstrating remarkable selectivity toward benzaldehyde. The protocol is then extended to the selective oxidation of different substrates, including (substituted) alkylaromatics, benzyl alcohols, and sulfides. Detailed mechanistic investigations revealed that iron- and manganese-containing photocatalysts work through a similar mechanism via the formation of high-valent M═O species. Operando X-ray absorption spectroscopy (XAS) is employed to confirm the formation of high-valent iron- and manganese-oxo species, typically found in metalloenzymes involved in highly selective C─H oxidations.

Contribution of Carbonyl Chromophores in Secondary Brown Carbon from Nighttime Oxidation of Unsaturated Heterocyclic Volatile Organic Compounds.

The light absorption properties of brown carbon (BrC), which are linked to molecular chromophores, may play a significant role in the Earth's energy budget. While nitroaromatic compounds have been identified as strong chromophores in wildfire-driven BrC, other types of chromophores remain to be investigated. Given the electron-withdrawing nature of carbonyls ubiquitous in the atmosphere, we characterized carbonyl chromophores in BrC samples from the nighttime oxidation of furan and pyrrole derivatives, which are important but understudied precursors of secondary organic aerosols primarily found in wildfire emissions. Various carbonyl chromophores were characterized and quantified in BrC samples, and their ultraviolet-visible spectra were simulated by using time-dependent density functional theory. Our findings suggest that chromophores with carbonyls bonded to nitrogen (i.e., imides and amides) derived from N-containing heterocyclic precursors substantially contribute to BrC light absorption. The quantified N-containing carbonyl chromophores contributed to over 40% of the total light absorption at wavelengths below 350 nm and above 430 nm in pyrrole BrC. The contributions of chromophores to total light absorption differed significantly by wavelength, highlighting their divergent importance in different wavelength ranges. Overall, our findings highlight the significance of carbonyl chromophores in secondary BrC and underscore the need for further investigation.

Effect of Hydroxyl-Containing Fragments on the Structure and Properties of Membrane-Forming Polyamide-Imides.

The structural features and thermophysical and transport properties of dense nonporous membranes of the casting type from (co)polyamide-imides synthesized by the polycondensation of the diacid chloride of 2-(4-carboxyphenyl)-1,3-dioxoisoindoline-5-carboxylic acid and diamines 5,5'-methylene-bis (2-aminophenol) (DADHyDPhM) and 4,4'-methylenebis(benzeneamine) (DADPhM), taken in molar ratios of 7:3, 1:1, and 3:7, have been studied. The effect of hydroxyl-containing modifying fragments of dihydroxy diphenylmethane introduced in various amounts into the main polymer chain on the pervaporation properties of the formed films is discussed. It has been shown that the presence of the residual solvent N-methyl-2-pyrrolidone in the films not only has a plasticizing effect on the characteristics of film membranes but also promotes the preferential transmembrane transport of polar liquids, primarily methanol (permeation rate over 2 kg for a copolymer with a ratio of DADHyDPhM:DADPhM = 7:3). The removal of the residual solvent from the polymer film, both thermally (heating to 200 °C) and by displacement with another solvent as a result of sequential pervaporation, led to a significant decrease in the rate of transfer of polar liquids and a decrease in the selectivity of the membrane. However, the dehydrocyclization reaction resulted in more brittle films with low permeability to penetrants of different polarities. The results of our comprehensive study made it possible to assume the decisive influence of structural changes in membranes occurring in connection with the competitive formation of intra- and intermolecular hydrogen bonds.

Design, Synthesis, Biological Evaluation, and Molecular Docking Study of 4,6-Dimethyl-5-aryl/alkyl-2-[2-hydroxy-3-(4-substituted-1-piperazinyl)propyl]pyrrolo[3,4-c]pyrrole-1,3(2H,5H)-diones as Anti-Inflammatory Agents with Dual Inhibition of COX and LOX.

In the present study, we characterize the biological activity of a newly designed and synthesized series of 15 compounds 2-[2-hydroxy-3-(4-substituted-1-piperazinyl)propyl] derivatives of pyrrolo[3,4-c]pyrrole 3a-3o. The compounds were obtained with good yields of pyrrolo[3,4-c]pyrrole scaffold 2a-2c with secondary amines in C2H5OH. The chemical structures of the compounds were characterized by 1H-NMR, 13C-NMR, FT-IR, and MS. All the new compounds were investigated for their potencies to inhibit the activity of three enzymes, i.e., COX-1, COX-2, and LOX, by a colorimetric inhibitor screening assay. In order to analyze the structural basis of interactions between the ligands and cyclooxygenase/lipooxygenase, experimental data were supported by the results of molecular docking simulations. The data indicate that all of the tested compounds influence the activity of COX-1, COX-2, and LOX.

The in vitro anti-inflammatory activity of N-antipyrine-3,4-dichloromaleimide derivatives is due to an immunomodulatory effect on cytokines environment.

BACKGROUND AND AIM: Inflammation is the immune response to a harmful stimulus, and its purpose is to destroy foreign agents so that the affected site can be repair. When uncontrolled or unresolved, inflammation can lead to significant tissue damage. Many classes of compounds are used today as anti-inflammatory drugs. However, there is an ongoing demand for new, more effective molecules with higher safety margins. In this regard, the anti-inflammatory effect of six synthetic compounds of N-antipyrine-3,4-dichloromaleimide was evaluated. METHODS: RAW 264.7 cells were used to evaluate the cytotoxicity and the anti-inflammatory activity, by measuring the effect of these molecules on nitric oxide, IL-1ß, IL-6, MCP-1 (CCL2), TNF-α, INF-γ, IL-4, and IL-13 levels, as well as under NF-κB activation. RESULTS: Some of the tested compounds showed significant cytotoxicity (CC50 < 100 µM). Subsequently, the potential of nitric oxide (NO) inhibition as screening for potential anti-inflammatory action was evaluated. Three of the compounds tested showed a promising profile (1, 3, and 5). When the effect of these compounds was evaluated on the production of IL-1ß, IL-6, MCP-1 (CCL2), TNF-α, and INF-γ, only N-antipyrine-3,4-dichloromaleimide (1) and N-antipyrine-3-chloro-4-(3,4-dichloroaniline) maleimide (3) showed significant inhibition profiles. These two compounds were also able to increase the production of cytokines known for having an anti-inflammatory profile (IL-4 and IL-13) and inhibit the phosphorylation of the p-p65 NF-κB subunit significantly. CONCLUSION: In conclusion, these two compounds present a significant and unusual anti-inflammatory mechanism (increasing the production of anti-inflammatory mediators). They are therefore considered promising prototypes for the development of new anti-inflammatory drugs with immunomodulatory characteristics.

Modified Poly(Heptazine Imides): Minimizing H2O2 Decomposition to Maximize Oxygen Reduction.

Photocatalysis provides a sustainable pathway to produce the consumer chemical H2O2 from atmospheric O2 via an oxygen reduction reaction (ORR). Such an alternative is attractive to replace the cumbersome traditional anthraquinone method for H2O2 synthesis on a large scale. Carbon nitrides have shown very interesting results as heterogeneous photocatalysts in ORR because their covalent two-dimensional (2D) structure is believed to increase selectivity toward the two-electron process. However, an efficient and scalable application of carbon nitrides for this reaction is far from being achieved. Poly(heptazine imides) (PHIs) are a more powerful subgroup of carbon nitrides whose structure provides high crystallinity and a scaffold to host transition-metal single atoms. Herein, we show that PHIs functionalized with sodium and the recently reported fully protonated PHI exhibit high activity in two-electron ORR under visible light. The latter converted O2 to up to 1556 mmol L-1 h-1 g-1 H2O2 under 410 nm irradiation using inexpensive but otherwise chemically demanding glycerin as a sacrificial electron donor. We also prove that functionalization with transition metals is not beneficial for H2O2 synthesis, as the metal also catalyzes its decomposition. Transient photoluminescence spectroscopy suggests that H-PHIs exhibit higher activity due to their longer excited-state lifetime. Overall, this work highlights the high photocatalytic activity of the rarely examined fully protonated PHI and represents a step forward in the application of inexpensive covalent materials for photocatalytic H2O2 synthesis.

Squarephaneic Tetraanhydride: A Conjugated Square-Shaped Cyclophane for the Synthesis of Porous Organic Materials.

Aromatic carboxylic anhydrides are ubiquitous building blocks in organic materials chemistry and have received considerable attention in the synthesis of organic semiconductors, pigments, and battery electrode materials. Here we extend the family of aromatic carboxylic anhydrides with a unique new member, a conjugated cyclophane with four anhydride groups. The cyclophane is obtained in a three-step synthesis and can be functionalised efficiently, as shown by the conversion into tetraimides and an octacarboxylate. Crystal structures reveal the high degree of porosity achievable with the new building block. Excellent electrochemical properties and reversible reduction to the tetraanions are shown for the imides; NMR and EPR measurements confirm the global aromaticity of the dianions and evidence the global Baird aromaticity of the tetraanions. Considering the short synthesis and unique properties, we expect widespread use of the new building block in the development of organic materials.

Unraveling the Role of Aromatic Ring Size in Tuning the Electrochemical Performance of Small-Molecule Imide Cathodes for Lithium-Ion Batteries.

Organic electrode materials have the typical advantages of flexibility, low cost, abundant resources, and recyclability. However, it is challenging to simultaneously optimize the specific capacity, rate capability, and cycling stability. Radicals are inevitable intermediates that critically determine the redox activity and stability during the electrochemical reaction of organic electrodes. Herein, we select a series of aromatic imides, including pyromellitic diimide (PMDI), 1,4,5,8-naphthalenediimide (NDI), and 3,4,9,10-perylenetetracarboxylicdiimide (PTCDI), which contain different extending π-conjugated aromatic rings, to study the relationship between their electrochemical performance and the size of the aromatic ring. The results show that regulating the aromatic ring size of imide molecules could finely tune the energies of the lowest unoccupied molecular orbital (LUMO), thus optimizing the redox potential. The rate performance of PMDI, NDI, and PTCDI increases with the aromatic ring size, which is consistent with the decrease in the LUMO-HOMO gap of these imide molecules. DFT calculations and experiments reveal that the redox of imide radicals dominates the charge/discharge processes. Also, extending the aromatic rings could more effectively disperse the spin electron density and improve the stability of imide radicals, contributing to the enhanced cycling stability of these imide electrodes. Hence, aromatic ring size regulation is a simple and novel approach to simultaneously enhance the capacity, rate capability, and cycling stability of organic electrodes for high-performance lithium-ion batteries.

Antihyperlipidemic Activity of Glycoconjugated Phthalimides in Mice Submitted to a Model of Dyslipidemia and Insulin Resistance.

Alterations in lipid and lipoprotein metabolism are factors that trigger several negative metabolic complications. Hyperlipidemia is the starting point for the development of comorbidities of the cardiovascular system, such as atherosclerosis. The search for compounds that reduce high levels of total cholesterol and triglycerides has been widely reported in several publications in the literature. Phthalimide derivatives have been extensively researched with various biological actions. In this study we evaluated the antihyperlipidemic ability of three phthalimide derivatives (FGT-2, FGT-3 and FGT-4) on a model of obesity and insulin resistance in mice. The animals were submitted to a hyperlipid diet for 60 days. On the thirtieth day they were treated with phthalimides (20 mg/kg). The positive control group was treated with Simvastatin (20 mg/kg) and the negative control received only the carboxymethylcellulose vehicle. Biochemical and histological analyzes of all groups were analyzed. The animals treated with phthalimidic derivatives had a reduction in total cholesterol, low density and very low density lipoproteins (LDL-c and VLDL-c), triglycerides and fasting glycemia when compared to the negative control group. The treated animals also showed good results when analyzing the atherogenic indexes Castelli i and II and the ratio Triglycerides/HDL-c. In the oral glucose tolerance test and in the insulin tolerance test, animals treated with phthalimides were more sensitive to the action of the hormone regulating carbohydrate uptake. In the evaluation of the transaminases (AST/ALT), the animals of the group treated with phthalimides presented a lower elevation than the other groups of the experiment, the same observed with the uric acid evaluation. Histological analyzes were performed on liver, kidney, heart and pancreas samples. The groups treated with the compounds FGT-2 and FGT3 presented discrete alterations in the liver and kidney. FGT-4 did not present histological alterations for both tissues and the three phthalimide derivatives did not cause alterations in the other organs. These results suggest that the phthalimides tested can act as antihyperlipidemic agents and have a pleiotropic action, by acting also reducing glycemia in insulin resistance model mimicking diabetes mellitus type 2. These compounds may appear as a new approach in the treatment of obesity and complications, which are multifaceted.

On the Role of Amides and Imides for Understanding GaN Syntheses from Ammonia Solution: Molecular Mechanics Models of Ammonia, Amide and Imide Interactions with Gallium Nitride.

A key requisite to characterizing GaN precipitation from ammonia solution from molecular simulations is the availability of reliable molecular mechanics models for the interactions of gallium ions with NH3 , NH2- , and NH2- species, respectively. Here, we present a tailor-made force field which is fully compatible to an earlier developed GaN model, thus bridging the analyses of Ga3+ ions in ammonia solution with the aggregation of [Gax (NH)y (NH2 )z ]+3x-2y-z precursors and the modelling of GaN crystals. For this, quantum mechanical characterization of a series of Ga-coordination clusters is used for parameterization and benchmarking the generalized amber force field (GAFF2) and tailor-made refinements needed to achieve good agreement of both structural features and formation energy, respectively. The perspectives of our models for larger scale molecular dynamics simulations are demonstrated by the analyses of amide and imide defects arrangement during the growth of GaN crystal faces.

Development of novel conformationally restricted selective Clk1/4 inhibitors through creating an intramolecular hydrogen bond involving an imide linker.

As prime regulators of pre-mRNA alternative splicing, different Clk isoforms were found to be overexpressed in various tumour types and have received much attention recently as potential targets for cancer therapy. Several studies have reported potent small-molecule Clk1/4 inhibitors with promising cellular anti-cancer activities; however, their clinical use was generally hampered by their compromised selectivity against off-targets, mainly Clk2 and Dyrk1A. In this study, we present a novel series of N-aroylated 5-methoxybenzothiophene-2-carboxamides (imides) as potent and selective Clk1/4 inhibitors. Potency of this series was found to be mainly dependent on the presence of an intramolecular H-bond between an ortho-methoxy group and the imide NH, that stabilizes a nearly coplanar conformation of high affinity to the ATP binding pocket(s) of Clk1/4. The two most potent hits in this series, compounds 20 (4-fluoro-2-methoxy) and 31 (5-chloro-2-methoxy) had cell free Clk1 IC50s of 4 and 9.7 nM, respectively, besides an unprecedented selectivity over Clk2 with 62- and 50-times higher affinities towards Clk1, respectively. 20 and 31 also exhibited remarkable selectivity over most common off-targets including Dyrk1A. Moreover, compounds 26 (2-ethoxy) and 31 showed growth inhibitory activities in T24 cancer cells with GI50s of <0.1 and 1.1 µM, respectively.

Molecular Characterization of Membrane Gas Separation under Very High Temperatures and Pressure: Single- and Mixed-Gas CO2/CH4 and CO2/N2 Permselectivities in Hybrid Networks.

This work illustrates the potential of using atomistic molecular dynamics (MD) and grand-canonical Monte Carlo (GCMC) simulations prior to experiments in order to pre-screen candidate membrane structures for gas separation, under harsh conditions of temperature and pressure. It compares at 300 °C and 400 °C the CO2/CH4 and CO2/N2 sieving properties of a series of hybrid networks based on inorganic silsesquioxanes hyper-cross-linked with small organic PMDA or 6FDA imides. The inorganic precursors are the octa(aminopropyl)silsesquioxane (POSS), which degrades above 300 °C, and the octa(aminophenyl)silsesquioxane (OAPS), which has three possible meta, para or ortho isomers and is expected to resist well above 400 °C. As such, the polyPOSS-imide networks were tested at 300 °C only, while the polyOAPS-imide networks were tested at both 300 °C and 400 °C. The feed gas pressure was set to 60 bar in all the simulations. The morphologies and densities of the pure model networks at 300 °C and 400 °C are strongly dependent on their precursors, with the amount of significant free volume ranging from ~2% to ~20%. Since measurements at high temperatures and pressures are difficult to carry out in a laboratory, six isomer-specific polyOAPS-imides and two polyPOSS-imides were simulated in order to assess their N2, CH4 and CO2 permselectivities under such harsh conditions. The models were first analyzed under single-gas conditions, but to be closer to the real processes, the networks that maintained CO2/CH4 and CO2/N2 ideal permselectivities above 2 were also tested with binary-gas 90%/10% CH4/CO2 and N2/CO2 feeds. At very high temperatures, the single-gas solubility coefficients vary in the same order as their critical temperatures, but the differences between the penetrants are attenuated and the plasticizing effect of CO2 is strongly reduced. The single-gas diffusion coefficients correlate well with the amount of available free volume in the matrices. Some OAPS-based networks exhibit a nanoporous behavior, while the others are less permeable and show higher ideal permselectivities. Four of the networks were further tested under mixed-gas conditions. The solubility coefficient improved for CO2, while the diffusion selectivity remained similar for the CO2/CH4 pair and disappeared for the CO2/N2 pair. The real separation factor is, thus, mostly governed by the solubility. Two polyOAPS-imide networks, i.e., the polyorthoOAPS-PMDA and the polymetaOAPS-6FDA, seem to be able to maintain their CO2/CH4 and CO2/N2 sieving abilities above 2 at 400 °C. These are outstanding performances for polymer-based membranes, and consequently, it is important to be able to produce isomer-specific polyOAPS-imides for use as gas separation membranes under harsh conditions.

Saving the Energy Loss in Lithium-Mediated Nitrogen Fixation by Using a Highly Reactive Li3 N Intermediate for C-N Coupling Reactions.

Direct synthesis of N-containing organic compounds from dinitrogen (N2 ) can make synthetic chemistry more sustainable. Previous bottlenecks in lithium-mediated N2 fixation were resolved by loading Li-metal anodes covered with the typical Li+ ion-conducting solid electrolyte interface, which are subsequently allowed to react with N2 . The developed strategy allowed us to reach high Faradaic efficiencies toward Li3 N. These reactive Li3 N were then contacted with acylchlorides. Surface nitride ions are more nucleophilic than amines which direct the two C-N coupling reactions toward formation of imides rather than amides, and an integrated current efficiency of 57-77 % could be realized. This study thereby not only provides a feasible electrochemical Li3 N synthesis, but also delineates an economical and green synthesis of highly valuable N-containing compounds from N2 under mild conditions, just using commercial spare parts and processes from the omnipresent Li battery technology.

Construction and Activity of an All-Organic Heterojunction Photocatalyst Based on Melem and Pyromellitic Dianhydride.

The separation efficiency of photogenerated carriers in the g-C3 N4 system could be improved by the construction of all-organic heterojunctions. However, g-C3 N4 has a large π-π conjugated plane that induces a low number of amino groups (-NH2 ), which are the sites of the heterojunction reaction with organic molecules. In this case, few heterojunction knots can be constructed, and the enhancement effect of the heterojunction cannot be fully displayed. In this study, an all-organic heterojunction with PMDA is constructed with melem instead of g-C3 N4 . Although the photocatalytic activity of melem is far below that of g-C3 N4 , the photocatalytic activity of PI (the all-organic heterojunction constructed with melem) is considerably higher than that of CP (the all-organic heterojunction constructed with g-C3 N4 ). This result is attributed to melem that has more -NH2 groups to form more heterojunction knots, which can enable the effective transfer and separation of electron-hole pairs. These new findings may shed light on the design of all-organic heterojunction photocatalysts.

Diversity-oriented synthesis and bioactivity evaluation of N-substituted ferrocifen compounds as novel antiproliferative agents against TNBC cancer cells.

Ferrociphenols are characterized by the presence of a biologically active redox motif [ferrocenyl-ene-p-phenol], and are known to exhibit anticancer properties. Recent studies have identified a new series of ferrociphenols that bear an imido-type heterocycle at the terminus of a short alkyl chain, and which showed very strong antiproliferativity against multiple types of cancer cells. This work describes the syntheses and an SAR study of ferrociphenols bearing a diversity-based range of nitrogen-containing substituents on the alkyl chain. Preliminary oxidative metabolism experiments and ROS-related bioactivity measurements were also carried out to probe the origin of the cytotoxicity of the imido-ferrociphenols. Furthermore, an interesting dimerization phenomenon was observed in the X-ray crystal structure of the 2,3-naphthalenedicarboximidopropyl-ferrocidiphenol, 21, which may be a factor in decreasing its rate of oxidation to form the corresponding quinone methide, 21-QM, thereby affecting its antitumor activity. These results suggest that both the formation rate and the stability of QMs could affect the antiproliferative activity of their ferrociphenol precursors.

An Oxidation Study of Phthalimide-Derived Hydroxylactams.

A systematic study of the oxidation of 3-hydroxy-2-substituted isoindolin-1-ones (hydroxylactams) and their conversion to the corresponding phthalimides was undertaken using three oxidants. Of special interest was the introduction of nickel peroxide (NiO2) as an oxidation system for hydroxylactams and comparison of its performance with the commonly used pyridinium chlorochromate (PCC) and iodoxybenzoic acid (IBX) reagents. Using a range of hydroxylactams, optimal conversions of these substrates to the corresponding imides was achieved with 50 equivalents of freshly prepared NiO2 in refluxing toluene over 5-32 h reaction times. By comparison, oxidations of the same substrates using PCC/silica gel (three equivalents) and IBX (three equivalents) required oxidation times of 1-3 h for full conversion but required lengthier purification. While nominal amounts (~25 mg) of substrate hydroxylactams were used to ascertain conversion, scale-up procedures using all three methods gave good to excellent isolated yields of imides.