Enhanced Sb(V) removal of sulfate-rich wastewater by anaerobic granular sludge assisted with Fe/C amendment.

Antimony (Sb) and sulfate are two common pollutants in Sb mine drainage and Sb-containing textile wastewater. In this paper, it was found that iron­carbon (Fe/C) enhanced Sb(V) removal from sulfate-rich wastewater by anaerobic granular sludge (AnGS). Sulfate inhibited Sb(V) removal (S + Sb, k = 0.101), while Fe/C alleviated the inhibition and increased Sb(V) removal rate by 2.3 times (Fe/C + S + Sb, k = 0.236). Fe/C could promote the removal of Sb(III), and Sb(III) content decreased significantly after 8 h. Meanwhile, Fe/C enhanced the removal of sulfate. The 3D-EEM spectrum of supernatant in Fe/C + S + Sb group (at 24 h) showed that Fe/C stimulated the production of soluble microbial products (SMP) in wastewater. SMP alleviated the inhibition of sulfate, promoting AnGS to reduce Sb(V). Sb(V) could be reduced to Sb(III) both by AnGS and sulfides produced from sulfate reduction. Further analysis of extracellular polymeric substances (EPS) and AnGS showed that Fe/C increased the adsorbed Sb(V) in EPS and the c-type cytochrome content in AnGS, which may be beneficial for Sb(V) removal. Sb(V) reduction in Fe/C + S + Sb group may be related to the genus Acinetobacter, while in Sb group, several bacteria may be involved in Sb(V) reduction, such as Acinetobacter, Pseudomonas and Corynebacterium. This study provided insights into Fe/C-enhanced Sb(V) removal from sulfate-rich wastewater.

Iron-carbon galvanic cells strengthened anaerobic/anoxic/oxic process (Fe/C-A2O) for high-nitrogen/phosphorus and low-carbon sewage treatment.

The treatment of sewage with high-nitrogen/-phosphorus and low-carbon remains a challenge. A novel iron-carbon galvanic cells strengthened anaerobic/anoxic/oxic process (Fe/C-A2O) was developed for high-nitrogen/-phosphorus and low-carbon sewage treatment. The cost-effective iron-scraps (ISs) was recycled as Fe(0)-source under the mediation of Fe/C galvanic cell reaction to develop effective Fe(0)-oxidizing autotrophic-denitrification and -dephosphorization. Utilizing practical high-nitrogen/-phosphorus and low-carbon sewage as target wastewater, the performance, impact factors, contribution of Fe/C galvanic cell reactions, microbial characteristics, strengthening mechanisms, and application potential of Fe/C-A2O process were investigated. The Fe/C-A2O process achieved high TN and TP removal efficiencies of 92.0 ± 1.3% and 97.2 ± 0.9% with removal loads of 0.176 ± 0.002 kg TN/(m3·d) and 0.017 ± 0.002 kg TP/(m3·d), respectively. Optimal HRT of 12 h, DO of 4.0-4.5 mg/L, and reflux-ratio of 4:1 were obtained, and no sludge-reflux was required. Autotrophic-denitrification and -dephosphorization supported by the Fe/C galvanic cell reactions contributed 63.1% and 75.3% of TN and TP removal, respectively. Microbial characterization revealed the dominance of autotrophic denitrifiers (e.g., Thiobacillus), AOB (e.g., Nitrosomonas), NOB (e.g., Nitrospira), and heterotrophic denitrifiers (e.g., Zoogloea). The mechanism analysis demonstrated that Fe/C galvanic cells strengthened nitrogen removal by raising Fe2+/H2-supported autotrophic denitrification; and strengthened dephosphorization by introducing Fe3+-based PO43--precipitation and enhancing the denitrifying phosphate-accumulation by denitrifying phosphate-accumulating organisms (DPAOs). Based on the efficiency and cost evaluation, the ISs-based Fe/C-A2O process showed significant application potential as an upgrade strategy for traditional A2O process in advanced high-nitrogen/phosphorus and low-carbon sewage treatment.