2D Metal Enabled Weak Fermi Level Pinning Effect and Tunable Charge Injection in Contacts with Inorganic 2D Perovskites.

Tow-dimensional (2D) perovskites have invoked extensive interest because of their good stability and intriguing optoelectronic properties. However, in practical applications, the hampered carrier transportation imposed by the vertical array of large dielectric organic cations and the generally seen Fermi level pinning (FLP) effect in conventional metal-2D semiconductors need to be solved urgently. Sb3+/Bi3+-based inorganic lead-free 2D Cs3(M3+)2X9 perovskites (M = Sb3+, Bi3+; X = Cl-, Br-, I-) are promising candidates to replace the toxic 2D hLHP. The contact properties of Cs3Sb2Cl9 with 2D metals are studied in this work to achieve tunable Schottky barrier heights (SBH). Density functional theory calculations reveal a weak FLP factor of 0.91 in the studied junctions, which is beneficial for improving the carrier injection efficiency through electrode design. Calculations of tunneling properties indicate that a Cd3C2 electrode tends to achieve low SBH and high tunneling probability, while a VS2 (H) electrode tends to realize high SBH and low tunneling probability, suggesting that diverse applications of Cs3Sb2Cl9 can be achieved through electrode engineering.

Designing and synthesis of perovskite nanocrystals: a promising wide-spectrum solar light-responsive photocatalyst and lead ion sensor.

Perovskites are an emerging material with a variety of applications, ranging from their solar light conversion capability to their sensing efficiency. In current study, perovskite nanocrystals (PNCs) were designed using theoretical density functional theory (DFT) analysis. Moreover, the theoretically designed PNCs were fabricated and confirmed by various characterization techniques. The calculated optical bandgap from UV-Vis and fluorescence spectra were 2.15 and 2.05 eV, respectively. The average crystallite size of PNCs calculated from Scherrer equation was 15.18 nm, and point of zero charge (PZC) was obtained at pH 8. The maximum eosin B (EB) removal efficiency by PNCs was 99.56% at optimized conditions following first-order kinetics with 0.98 R2 value. The goodness of the response surface methodology (RSM) model was confirmed from analysis of variance (ANOVA), with the experimental F value (named after Ronald Fisher) of 194.66 being greater than the critical F value F0.05, 14, 14 = 2.48 and a lack of fit value of 0.0587. The Stern-Volmer equation with a larger Ksv value of 1.303710 × 10 6 for Pb2+ suggests its greater sensitivity for Pb2+ among the different metals tested.

Manipulating the Crystallization of Tin Halide Perovskites for Efficient Moisture-to-Electricity Conversion.

Manipulating the crystallization of perovskite in thin films is essential for the fabrication of any thin-film-based devices. Fabricating tin-based perovskite films from solution poses difficulties because tin tends to crystallize faster than the commonly used lead perovskite. To achieve optimal device performance in solar cells, the preferred method involves depositing tin perovskite under inert conditions using dimethyl sulfoxide (DMSO), which effectively retards the formation of the tin-bromine network, which is crucial for perovskite assembly. We found that under ambient conditions, a DMSO-based tin perovskite salt solution resulted in the formation of a two-phase system, SnBr4(DMSO)2 and MABr, whereas a dimethylformamide-based solution resulted in the formation of vacancy-ordered double perovskite MA2SnBr6. Humidity is known to solvate MABr to form the solvated ions, and so we used the two-phase system for the application in moisture to electricity conversion. The importance of the presence of the scaffold can be seen with the negligible power output from the vacancy-ordered double perovskite obtained with MA2SnBr6. We have fabricated a device with two-phase system that can generate an open-circuit potential of 520 mV and a short-circuit current density of 30.625 µA/cm2 at 85% RH. Also, the device charges a 10 µF capacitor from 150 mV at 51% RH to 500 mV at 85% RH in 6 s at a rate of 52.5 mV/s. Moreover, the output can be scaled by connecting devices in series and parallel configurations. A 527 nm green LED was powered by connecting five devices in series at 75% RH. This indicates a potential for utilizing these moisture-to-electricity conversion devices in powering low-energy requirement devices.

Comprehensive investigation of material properties and operational parameters for enhancing performance and stability of FASnI3-based perovskite solar cells.

Recent advancements in the efficiency of lead-based halide perovskite solar cells (PSCs), exceeding 25%, have raised concerns about their toxicity and suitability for mass commercialization. As a result, tin-based PSCs have emerged as attractive alternatives. Among diverse types of tin-based PSCs, organic-inorganic metal halide materials, particularly FASnI3 stands out for high efficiency, remarkable stability, low-cost, and straightforward solution-based fabrication process. In this work, we modelled the performance of FASnI3 PSCs with four different hole transporting materials (Spiro-OMeTAD, Cu2O, CuI, and CuSCN) using SCAPS-1D program. Compared to the initial structure of Ag/Spiro-OMeTAD/FASnI3/TiO2/FTO, analysis on current-voltage and quantum efficiency characteristics identified Cu2O as an ideal hole transport material. Optimizing device output involved exploring the thickness of the FASnI3 layer, defect density states, light reflection/transmission at the back and front metal contacts, effects of metal work function, and operational temperature. Maximum performance and high stability have been achieved, where an open-circuit voltage of 1.16 V, and a high short-circuit current density of 31.70 mA/cm2 were obtained. Further study on charge carriers capture cross-section demonstrated a PCE of 32.47% and FF of 88.53% at a selected capture cross-section of electrons and holes of 1022 cm2. This work aims to guide researchers for building and manufacturing perovskite solar cells that are more stable with moderate thickness, more effective, and economically feasible.

High-Performance Broadband Self-Driven Photodetector Based on MoS2/Cs2CuBr4 Heterojunction.

Few-layer transition metal dichalcogenides and perovskites are both promising materials in high-performance optoelectronic devices. Here, we developed a self-driven photodetector by creating a heterojunction between few-layer MoS2 and lead-free perovskite Cs2CuBr4. The detector shows a unique property of very high sensitivity in a broad spectral range of 400 to 800 nm with response speed in a millisecond order. Current-voltage characteristics of the heterojunction device show rectifying behavior, in contrast to the ohmic behavior of the MoS2-based device. The rectifying behavior is attributed to the type II band alignment of the MoS2/Cs2CuBr4 heterojunction. The device shows a broadband (400 to 800 nm) photodetection with very high responsivity reaching up to 2.8 × 104 A/W and detectivity of 1.6 × 1011 Jones at a bias voltage of 3 V. The detector can also operate in self-bias mode with sufficient response. The photocurrent, photoresponsivity, detectivity, and external quantum efficiency of the device are found to be dependent on the illumination power density. The response time of the device is found to be ∼32 and ∼79 ms during the rise and fall of the photocurrent. The work proposes a MoS2/Cs2CuBr4 heterostructure to be a promising candidate for cost-effective, high-performance photodetector.

Novel Sol-Gel Synthesis Route for Ce- and V-Doped Ba0.85Ca0.15Ti0.9Zr0.1O3 Piezoceramics.

To meet the current demand for lead-free piezoelectric ceramics, a novel sol-gel synthesis route is presented for the preparation of Ba0.85Ca0.15Ti0.9Zr0.1O3 doped with cerium (Ce = 0, 0.01, and 0.02 mol%) and vanadium (V = 0, 0.3, and 0.4 mol%). X-ray diffraction patterns reveal the formation of a perovskite phase (space group P4mm) for all samples after calcination at 800 °C and sintering at 1250, 1350, and 1450 °C, where it is proposed that both dopants occupy the B site. Sintering studies show that V doping allows the sintering temperature to be reduced to at least 1250 °C. Undoped BCZT samples sintered at the same temperature show reduced functional properties compared to V-doped samples, i.e., d33 values increase by an order of magnitude with doping. The dissipation factor tan δ decreases with increasing sintering temperature for all doping concentrations, while the Curie temperature TC increases for all V-doped samples, reaching 120 °C for high-concentration co-doped samples. All results indicate that vanadium doping can facilitate the processing of BCZT at lower sintering temperatures without compromising performance while promoting thermal property stability.

Organic-Inorganic Hybrid Cuprous-Based Metal Halides with Unique Two-Dimensional Crystal Structure for White Light-Emitting Diodes.

Ternary cuprous (Cu+)-based metal halides, represented by cesium copper iodide (e.g., CsCu2I3 and Cs3Cu2I5), are garnering increasing interest for light-emitting applications owing to their intrinsically high photoluminescence quantum yield and direct bandgap. Toward electrically driven light-emitting diodes (LEDs), it is highly desirable for the light emitters to have a high structural dimensionality as it may favor efficient electrical injection. However, unlike lead-based halide perovskites whose light-emitting units can be facilely arranged in three-dimensional (3D) ways, to date, nearly all ternary Cu+-based metal halides crystallize into 0D or 1D networks of Cu-X (X = Cl, Br, I) polyhedra, whereas 3D and even 2D structures remain mostly uncharted. Here, by employing a fluorinated organic cation, we report a new kind of ternary Cu+-based metal halides, (DFPD)CuX2 (DFPD+ = 4,4-difluoropiperidinium), which exhibits unique 2D layered crystal structure. Theoretical calculations reveal a highly dispersive conduction band of (DFPD)CuBr2, which is beneficial for charge carrier injection. It is also of particular significance to find that the 2D (DFPD)CuBr2 crystals show appealing properties, including improved ambient stability and an efficient warm white-light emission, making it a promising candidate for single-component lighting and display applications.

Development of Lead-Free Materials for Radiation Shielding in Medical Settings: A Review.

Radiation protection is an essential issue in diagnostic radiology to ensure the safety of patients, healthcare professionals, and the general public. Lead has traditionally been used as a shielding material due to its high atomic number, high density, and effectiveness in attenuating radiation. However, some concerns related to the long-term health effects of toxicity, environmental disease as well as heavy weight of lead have led to the search for alternative lead-free shielding materials. Leadfree multilayered polymer composites and non-lead nano-composite shields have been suggested as effective shielding materials to replace conventional lead-based and single metal shields. Using several elements with high density and atomic number, such as bismuth, barium, gadolinium, and tungsten, offer significant enhancements in the shielding ability of composites. This review focuses on the development and use of lead-free materials for radiation shielding in medical settings. It discusses the drawbacks of traditional lead shielding, such as toxicity, weight, and recycling challenges, and highlights the benefits of lead-free alternatives.

Polarized Raman, infrared and dielectric spectra of lead-free K0.5Na0.5NbO3piezoelectric system: insights fromab-initiotheoretical and experimental studies.

The K0.5Na0.5NbO3(KNN) system has emerged as one of the most promising lead-free piezoelectric over the years. In this work, we perform a comprehensive investigation of electronic structure, lattice dynamics and dielectric properties of room temperature phase of KNN by combiningab-initioDFT based theoretical analysis and experimental characterization. We assign the symmetry labels to KNN vibrational modes and obtainab-initiopolarized Raman spectra, Infrared reflectivity, Born-effective charge tensors, oscillator strengths etc. The KNN ceramic samples are prepared using conventional solid-state method and Raman and UV-Vis diffuse reflectance spectra are obtained. The computed Raman spectrum is found to agree well with the experimental spectrum. In particular, the results suggest that the mode in range ∼840-870 cm-1reported in the experimental studies is longitudinal optical withA1symmetry. The Raman mode intensities are calculated for different light polarization set-ups that suggests the observation of different symmetry modes in different polarization set-ups. The electronic structure of KNN is investigated and optical absorption spectrum is obtained. Further, the performances of DFT semi-local, meta-GGA and hybrid exchange-correlations functionals, in the estimation of KNN band gaps are investigated. The KNN bandgap computed using GGA-1/2 and HSE06 hybrid functional schemes are found to be in excellent agreement with the experimental value. The COHP, electron localization function and Bader charge analysis is also performed to deduce the nature of chemical bonding in the KNN. Overall, our study provides several bench-mark important results on KNN that have not been reported so far.

Implementing a 'Lead [Apron]-Free' Cardiac Catheterization: Current Status.

PURPOSE OF REVIEW: In this review, we discuss the status of novel radiation shielding and other methods to reduce radiation exposure and its associated health risks within the CCL. RECENT FINDINGS: There are many devices on the market each with its unique advantages and inherent flaws. Several are available for widespread use with promising data, while others still in development. The field of percutaneous transcatheter interventions includes complex procedures often involving significant radiation exposure. Increased radiation exposes the proceduralist and CCL staff to potential harm from both direct effects of radiation but also from the ergonomic consequences of daily use of heavy personal protective equipment. Here we discuss several innovative efforts to reduce both radiation exposure and orthopedic injury within the CCL that are available, leading to a safer daily routine in a "lead [apron]-free" environment.

Physical Properties of CaTiO3-Modified NaNbO3 Thin Films.

NaNbO3(NN)-based lead-free materials are attracting widespread attention due to their environment-friendly and complex phase transitions, which can satisfy the miniaturization and integration for future electronic components. However, NN materials usually have large remanent polarization and obvious hysteresis, which are not conducive to energy storage. In this work, we investigated the effect of introducing CaTiO3((1-x)NaNbO3-xCaTiO3) on the physical properties of NN. The results indicated that as x increased, the surface topography, oxygen vacancy and dielectric loss of the thin films were significantly improved when optimal value was achieved at x = 0.1. Moreover, the 0.9NN-0.1CT thin film shows reversible polarization domain structures and well-established piezoresponse hysteresis loops. These results indicate that our thin films have potential application in future advanced pulsed power electronics.

Ultrahigh Energy Storage Performance of BiFeO3-BaTiO3 Flexible Film Capacitor with High-Temperature Stability via Defect Design.

Nanoengineering polar oxide films have attracted great attention in energy storage due to their high energy density. However, most of them are deposited on thick and rigid substrates, which is not conducive to the integration of capacitors and applications in flexible electronics. Here, an alternative strategy using van der Waals epitaxial oxide dielectrics on ultra-thin flexible mica substrates is developed and increased the disorder within the system through high laser flux. The introduction of defects can efficiently weaken or destroy the long-range ferroelectric ordering, ultimately leading to the emergence of a large numbers of weak-coupling regions. Such polarization configuration ensures fast polarization response and significantly improves energy storage characteristics. A flexible BiFeO3-BaTiO3 (BF-BT) capacitor exhibits a total energy density of 43.5 J cm-3 and an efficiency of 66.7% and maintains good energy storage performance over a wide temperature range (20-200 °C) and under large bending deformation (bending radii ≈ 2 mm). This study provides a feasible approach to improve the energy storage characteristics of dielectric oxide films and paves the way for their practical application in high-energy density capacitors.

High Stability and Corrosion-Resistant Gas of Recyclable and Versatile Manganese-Doped Lead-Free Double Perovskite Crystals toward Novel Functional Fabric and Photoelectric Device.

Lead-free halide perovskites possess excellent photoelectric properties, making them widely used in the photoelectric fields. Herein, lead-free double perovskite crystals (PCs) doped with manganese (Cs2NaInCl6:Mn2+) are successfully prepared by the more energy-efficient crystallization method. The crystals emit bright orange-red light under the ultraviolet (UV) lamp, showing unique optical properties. They have the highest photoluminescence quantum yield of 42.91%. The white light-emitting diodes (LEDs) are fabricated using these perovskite crystals, which show a color rendering index of 92 and external quantum efficiency (EQE) as high as 16.3%. Furtherly, perovskite-modified fiber paper made of aramid chopped fibers (ACFs) and polyphenylene sulfide (PPS) exhibited fluorescent properties under different conditions. This paper combines fiber composite technology with PPS fiber filter bags, which are widely used in environmental protection, for the first time and demonstrates functional fiber filter bags with fluorescent characteristics. This filter bag provides an idea for the automatic detection of industrial filtration. Meanwhile, after being exposed to industrial waste gas for 60 h, the filter bag can maintain superior fluorescence performance. In this study, lead-free double perovskites are synthesized using an efficient method for preparing high-performance LEDs and high-stability fluorescent fibers. Concurrently, the application of perovskites in environmental protection is expanded.

Ultrahigh Electro-Bending Deformation in Lead-free Piezoelectric Ceramics via Defect Concentration Gradient Design.

Recent breakthroughs in defect-engineered lead-free piezoelectric ceramics have reported remarkable electro-strain values, surpassing the limit of lattice distortion. This has aroused wide concern on bending deformation and the associated underlying mechanism. Herein, via designing lead-free piezoelectric ceramics with varying volatilization characteristics, it is uncovered that the ultrahigh electro-bending deformation is primarily attributed to a large strain gradient induced by unevenly distributed defect dipoles. In 0.5mm-thick Sr/Sn co-doped potassium sodium niobate ceramics featuring volatile K/Na elements, the inherent bipolar electro-strain value can reach 0.3% at 20 kV cm-1 due to the existence of defect dipoles, while the gradient distribution of defect dipole generates significant bending displacement, amplifying apparent electro-strain value to 1.1%. Notably, non-volatile Ba0.99TiO2.99 ceramic with homogeneous defect dipole distribution does not present electro-bending. Of particular interest is that the electro-bending phenomenon can be observed through introducing a defect dipole gradient into barium titanate ceramic. A monolayer ceramic with defect dipole gradient can generate large tip displacement (±1.5 mm) in cantilever structure, demonstrating its promising potential in precise positioning. This study delves into the underlying mechanism driving electro-bending deformation and its impact on the apparent electro-strain measurement in defect-engineered piezoelectric ceramics, providing fresh perspectives for the development of piezoelectric bending actuators. This article is protected by copyright. All rights reserved.

Lead-free Cs2Ag1-xNaxIn1 - yBiyCl6 perovskite films with broad warm-yellow emission for lighting applications.

Lead-free halide double perovskite Cs2AgInCl6 has been extensively studied in recent years due to the lead toxicity and poor stability of common lead halide perovskites. In this study, sodium (Na+) and bismuth (Bi3+) doped into Cs2AgInCl6 double perovskite, then Cs2Ag1-xNaxIn1 - yBiyCl6 films with broadband warm-yellow emissions were achieved by the blade coating method. Herein, Na and Bi content were changed as variables at a series of parameter optimization experiments, respectively. In the Cs2Ag1-xNaxIn1 - yBiyCl6 systems, Na+ broke the parity-forbidden transition of Cs2AgInCl6, and Bi3+ suppressed non-radiative recombination. The partial replacement of Ag+ with Na+ ions and doping with Bi3+ cations were crucial for increasing the intensity of the PL emission. The experimental results showed that the photoluminescence quantum yield of the Cs2Ag0.4Na0.6In0.8Bi0.2Cl6 film was 66.38%, which was the highest data among all samples. It demonstrated remarkable stability under heat and ultraviolet conditions. After five thermal cycles, the PL intensity of the Cs2Ag0.4Na0.6In0.8Bi0.2Cl6 film is only reduced to approximately 5.7% of the initial value. After 720 h continuous ultraviolet irradiation, there occurred 31.9% emission decay of the film.

A Systematical Study on Bands and Defects of CsBX3 (B = Pb, Sn, Ge, X = Cl, Br, I) Perovskite Based on First Principles.

Metal halide perovskites have attracted considerable attention as novel optoelectronic materials for their excellent optical and electrical properties. Inorganic perovskites (CsPbX3, X = Cl, Br, I) are now viable alternative candidates for third-generation photovoltaic technology because of their high photoelectric conversion efficiency, high carrier mobility, good defect tolerance, simple preparation method and many other advantages. However, the toxicity of lead is problematic for practical implementation. Thus, the fabrication of lead-free perovskite materials and devices has been actively conducted. In this work, the energy band and photoelectric properties of inorganic perovskites CsBX3 (B = Pb, Sn, Ge, X = Cl, Br, I) have been investigated with the first principles calculation, and the possible defect energy levels and their formation energies in different components, in particular, have been systematically studied. The advantages and disadvantages of Sn and Ge as replacement elements for Pb have been demonstrated from the perspective of defects. This study provides an important basis for the study of the properties and applications of lead-free perovskites.

Spectrally Tunable Lead-Free Perovskite Rb2ZrCl6:Te for Information Encryption and X-ray Imaging.

A series of lead-free Rb2ZrCl6:xTe4+ (x = 0%, 0.1%, 0.5%, 1.0%, 2.0%, 3.0%, 5.0%, 10.0%) perovskite materials were synthesized through a hydrothermal method in this work. The substitution of Te4+ for Zr in Rb2ZrCl6 was investigated to examine the effect of Te4+ doping on the spectral properties of Rb2ZrCl6 and its potential applications. The incorporation of Te4+ induced yellow emission of triplet self-trapped emission (STE). Different luminescence wavelengths were regulated by Te4+ concentration and excitation wavelength, and under a low concentration of Te4+ doping (x ≤ 0.1%), different types of host STE emission and Te4+ triplet state emission could be achieved through various excitation energies. These luminescent properties made it suitable for applications in information encryption. When Te4+ was doped at high concentrations (x ≥ 1%), yellow triplet state emission of Te4+ predominated, resulting in intense yellow emission, which stemmed from strong exciton binding energy and intense electron-phonon coupling. In addition, a Rb2ZrCl6:2%Te4+@RTV scintillating film was fabricated and a spatial resolution of 3.7 lp/mm was achieved, demonstrating the potential applications of Rb2ZrCl6:xTe4+ in nondestructive detection and bioimaging.

Taguchi Optimization of Wetting, Thermal and Mechanical Properties of Sn-1.0wt.%Ag-0.5wt.%Cu Alloys Modified with Bi and Sb.

This study was conducted on SAC105 (Sn-1wt.%Ag-0.5wt.%Cu) lead-free solder modified with Bi and Sb. The wetting, melting point, and mechanical properties were analysed with the addition of 1~5 wt.%Bi and 1~5 wt.%Sb for SAC105 base alloy. The wetting characteristics were assessed by wetting time (zero cross time, ZCT) obtained from wetting balance tests. The mechanical properties were analysed by tensile tests. Considering two factors (Bi, Sb), a three-level (0, 1, 2 wt.%) design of experiment (DOE) method array was applied for Taguchi optimization. The results indicated that the solder wetting increased as Bi content increased, while it decreased with Sb. The ZCT decreased with increasing Bi content up to 4 wt.%, while it increased proportionally to Sb content. The melting point, measured using a differential scanning calorimeter (DSC), showed that the melting point tended to decrease according to Bi increase, while it increases depending on the Sb content. Increase in Bi and Sb levels resulted in enhanced tensile strength in the mechanical properties tests, with Bi having a more noticeable impact. The Taguchi optimized conditions for the Bi and Sb studies were found to be 2 wt.%Bi and 2 wt.%Sb. This led to an optimal set of 0.9 s of wetting time, a 222.55 °C melting point, a 55 MPa tensile strength, and a 50% elongation.

A Novel Approach for Temperature-Induced Ball Grid Array Collapse Observation.

This study presents a new approach to investigating the impact of repeated reflow on the failure of ball grid array (BGA) packages. The issue with the BGA package collapse is that the repeated reflow can lead to short circuits, particularly for BGAs with a very fine pitch between leads. A novel approach was developed to measure the collapse of BGA solder balls during the melting and solidification process, enabling in situ measurements. The study focused on two types of solders: Sn63Pb37 as a reference, and the commonly used SAC305, with measurements taken at various temperatures. The BGA samples were subjected to three different heating/cooling cycles in a thermomechanical analyzer (TMA) at temperatures of 250 °C, 280 °C, and 300 °C, with a subsequent cooling down to 100 °C. The results obtained from the TMA indicated differences in the collapse behavior of both BGA solder alloys at various temperatures. Short circuits between neighboring leads (later confirmed by an X-ray analysis) were also recognizable on the TMA. The novel approach was successfully developed and applied, yielding clear insights into the behavior of solder balls during repeated reflow.

Structurally Regulated Design Strategy of Bi0.5Na0.5TiO3-Based Ceramics for High Energy-Storage Performance at a Low Electric Field.

Dielectric ceramic capacitors are prospective energy-storage devices for pulsed-power systems owing to their ultrafast charge-discharge speed. However, low energy-storage density makes them difficult to commercialize for high-pulse-power technology applications. Herein, we presented a structurally regulated design strategy to disrupt a long-range ferroelectric order, refined grains, and eventually achieve excellent comprehensive energy-storage performance in (1 - x) (0.7Bi0.5Na0.5TiO3-0.3SrTiO3)-x Sm(Zn2/3Nb1/3)O3 eco-friendly ceramics. A large Wrec of ∼7.43 ± 0.05 J/cm3 and a high η of ∼85 ± 0.5% of 0.96 (0.7Bi0.5Na0.5TiO3-0.3SrTiO3)-0.04 Sm(Zn2/3Nb1/3)O3 were obtained at a low electric field of 290 kV cm-1 with good energy-storage temperature (25-120 °C), frequency (1-100 Hz) stability, and charge-discharge properties (PD ∼ 74 ± 1 MW/cm3 and τ0.9 ∼ 159 ± 2 ns). This strategy inspires rational structurally regulated designs and aims to promote the development of eco-friendly 0.7Bi0.5Na0.5TiO3-based ceramics with excellent energy-storage characteristics.