RESUMO
Recently, certain challenges and accompanying drawbacks have emerged in the preparation of high-strength and tough polymer hydrogels. Insights from wood science highlight the role of the intertwined molecular structure of lignin and crystalline cellulose in contributing to wood's strength. Herein, we immersed prestretched poly(vinyl alcohol) (PVA) polymer hydrogels into a solution of nanosized lignosulfonate sodium (LS), a water-soluble anionic polyelectrolyte, to creatively reconstruct this similar structure at the molecular scale in hydrogels. The nanosized LS effectively fixed and bundled the prestretched PVA polymers while inducing the formation of dense crystalline domains within the polymer matrix. Consequently, the interwoven structure of crystalline PVA and LS conferred good strength to the composite hydrogels, exhibiting a tensile strength of up to â¼23 MPa, a fracture strain of â¼350%, Young's modulus of â¼17 MPa, toughness of â¼47 MJ/m3, and fracture energy of â¼42 kJ/m2. This hydrogel far outperformed previous hydrogels composed directly of lignin and PVA (tensile strength <1.5 MPa). Additionally, the composite hydrogels demonstrated excellent antifreezing properties (<-80 °C). Notably, the LS-assisted reconstruction technology offers opportunities for the secondary fixation of PVA hydrogel shapes and high-strength welding of hydrogel components. This work introduces an approach for the high-value utilization of LS, a green byproduct of pulp production. LS's profound biomimetic strategy will be applied in multifunctional hydrogel fields.
RESUMO
Herein, a novel sulfur-doped carbon material has been synthesized via a facile and sustainable single-step pyrolysis method using lignin-sulfonate (LS), a by-product of the sulfite pulping process, as a novel carbon precursor and zinc chloride as a chemical activator. The sulfur doping process had a remarkable impact on the LS-sulfur carbon structure. Moreover, it was found that sulfur doping also had an important impact on sodium diclofenac removal from aqueous solutions due to the introduction of S-functionalities on the carbon material's surface. The doping process effectively increased the carbon specific surface area (SSA), i.e., 1758 m2 g-1 for the sulfur-doped and 753 m2 g-1 for the non-doped carbon. The sulfur-doped carbon exhibited more sulfur states/functionalities than the non-doped, highlighting the successful chemical modification of the material. As a result, the adsorptive performance of the sulfur-doped carbon was remarkably improved. Diclofenac adsorption experiments indicated that the kinetics was better described by the Avrami fractional order model, while the equilibrium studies indicated that the Liu model gave the best fit. The kinetics was much faster for the sulfur-doped carbon, and the maximum adsorption capacity was 301.6 mg g-1 for non-doped and 473.8 mg g-1 for the sulfur-doped carbon. The overall adsorption seems to be a contribution of multiple mechanisms, such as pore filling and electrostatic interaction. When tested to treat lab-made effluents, the samples presented excellent performance.
RESUMO
Supramolecular hydrogels are typically assembled through weak non-covalent interactions, posing a significant challenge in achieving ultra strength. Developing a higher strength based on molecular/nanoscale engineering concepts is a potential improvement strategy. Herein, a super-tough supramolecular hydrogel is assembled by gradually diffusing lignosulfonate sodium (LS) into a polyvinyl alcohol (PVA) solution. Both simulations and analytical results indicate that the assembly and subsequent enhancement of the crosslinked network are primarily attributed to LS-induced formation and gradual densification of strong crystalline domains within the hydrogel. The optimized hydrogel exhibits impressive mechanical properties with tensile strength of ≈20 MPa, Young's modulus of ≈14 MPa, and toughness of ≈50 MJ mâ»3, making it the strongest lignin-PVA/polymer hydrogel known so far. Moreover, LS provides the supramolecular hydrogel with excellent low-temperature stability (<-60 °C), antibacterial, and UV-blocking capability (≈100%). Interestingly, the diffusion ability of LS is demonstrated for self-restructuring damaged supramolecular hydrogel, achieving 3D patterning on hydrogel surfaces, and enhancing the local strength of the freeze-thaw PVA hydrogel. The goal is to foster a versatile hydrogel platform by combining eco-friendly LS with biocompatible PVA, paving the way for innovation and interdisciplinarity in biomedicine, engineering materials, and forestry science.
RESUMO
The polyurethane (PU) foams can be functionally tailored by modifying the formulation with different additives. One such additive is melamine (MA) formaldehyde resin for improving their flame-retardant properties. In this work, the glycerol-modified (GMF), sodium alginate (SGMF)- and lignosulfonate-modified melamine formaldehyde (LGMF) were prepared and used as flame retardants reacting with isocyanate to prepare the corresponding rigid polyurethane foams (GMF-PU, SGMF-PU and LGMF-PU). The thermomechanical properties and flame-retardant properties of the foams were characterized. The results showed that the specific compression strength of GMF-PU, SGMF-PU and LGMF-PU increased substantially compared to the foams from physical addition of MA, sodium alginate and lignosulfonate, all of which were greater than that of the foam without any flame retardant (PPU). Meanwhile, the cell wall of the foam pores became thicker and the closed pore ratio increased. The sodium alginate and lignosulfonate played a key role in enhancing foam thermal stability. The limiting oxygen index values and cone calorimetry results indicated the flame-retardant efficiency of GMF-PU, SGMF-PU and LGMF-PU was significantly enhanced relative to PPU. Meanwhile, the heat and smoke release results indicated sodium alginate and lignosulfonate could reduce the amount of smoke generation to different degrees during the combustion of the foam.
Assuntos
Alginatos , Retardadores de Chama , Lignina , Poliuretanos , Triazinas , Triazinas/química , Poliuretanos/química , Retardadores de Chama/análise , Lignina/química , Lignina/análogos & derivados , Alginatos/química , Resinas Sintéticas/química , Glicerol/química , Temperatura , Formaldeído/química , Formaldeído/análiseRESUMO
The extensive utilization of non-biodegradable plastic agricultural mulch in the past few decades has resulted in severe environmental pollution and a decline in soil fertility. The present study involves the fabrication of environmentally friendly paper-based mulch with dual functionality, incorporating agrochemicals and heavy metal ligands, through a sustainable papermaking/coating technique. The functional paper-based mulch consists of a cellulose fiber web incorporated with Emamectin Benzoate (EB)@ Aminated sodium lignosulfonate (ASL). The spherical microcapsules loaded with the pesticide EB exhibited an optimal core-shell structure for enhanced protection and controlled release of the photosensitizer EB (Sustained release >75 % in 50 h). Meanwhile, the ASL, enriched with metal chelating groups (-COOH, -OH, and -NH2, etc.), served as a stabilizing agent for heavy metal ions, enhancing soil remediation efficiency. The performance of paper-based mulch was enhanced by the application of a hydrophobic layer composed of natural chitosan/carnauba wax, resulting in exceptional characteristics such as superior tensile strength, hydrophobicity, heat insulation, moisture retention, as well as compostability and biodegradability (biodegradation >80 % after 70 days). This study developed a revolutionary lignocellulosic eco-friendly mulch that enables controlled agrochemical release and soil heavy metal remediation, leading to a superior substitute to conventional and non-biodegradable plastic mulch used in agriculture.
Assuntos
Lignina , Metais Pesados , Praguicidas , Metais Pesados/química , Lignina/química , Lignina/análogos & derivados , Praguicidas/química , Preparações de Ação Retardada , Plásticos/química , Poluentes do Solo/química , Agricultura/métodos , Quitosana/química , Fármacos Fotossensibilizantes/química , Biodegradação Ambiental , Solo/químicaRESUMO
Soft ionic conductors exhibit immense potential for applications in soft ionotronics, including ionic skin, human-machine interface, and soft luminescent device. Nevertheless, the majority of ionogel-based soft ionic conductors are plagued by issues such as freezing, evaporation, liquid leakage, and inadequate self-healing capabilities, thereby constraining their usability in complex environments. In this study, we present a novel strategy for fabricating conductive ionogels through the proportionally mixing cationic guar gum (CGG), water, 1-butyl-3-methylimidazolium chloride (BmimCl)/glycerol eutectic-based ionic liquid, and poly(3,4-ethylenedioxythiophene)/lignosulfonate (PEDOT/LS). The resultant benefits from strong hydrogen bonding and electrostatic interactions among its constituents, endowing it with an ultrafast self-healing capability (merely 30 s) while sustaining high electrical conductivity (~16.5 mS cm-1). Moreover, it demonstrates exceptional water retention (62 % over 10 days), wide temperature tolerance (-20 to 60 °C), and injectability. A wearable sensor fabricated from this ionogel displayed remarkable sensitivity (gauge factor = 17.75) and a rapid response to variations in strain, pressure, and temperature, coupled with both long-term stability and wide working temperature range. These attributes underscore its potential for applications in healthcare devices and flexible electronics.
Assuntos
Compostos Bicíclicos Heterocíclicos com Pontes , Condutividade Elétrica , Galactanos , Géis , Lignina , Mananas , Gomas Vegetais , Polímeros , Gomas Vegetais/química , Galactanos/química , Mananas/química , Polímeros/química , Lignina/química , Lignina/análogos & derivados , Géis/química , Compostos Bicíclicos Heterocíclicos com Pontes/química , Dispositivos Eletrônicos Vestíveis , Cátions/química , Congelamento , HumanosRESUMO
In food packaging, sodium lignosulfonate nanoparticles (SLS NPs) showed significant antibacterial properties, antioxidant and UV barrier activities. Herein, the SLS NPs were synthesized via a sustainable green method and were added into egg albumin/sodium alginate mixture (EA/SA) to fabricate a safe, edible EA/SA/SNPs food packaging. A composite film EA/SA/SNP was examined microstructurally and physicochemically. The mechanical characteristics, UV protection, water resistance, and the composite film's thermal stability were all enhanced by the inclusion of SLS NPs, and water vapor permeability reduced by 44 %. This composite film exhibited robust antioxidative properties with DPPH and ABTS free radical scavenging rates reaching 76.84 % and 92.56 %, and effective antimicrobial activity against Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus) with antibacterial rates reaching 98.25 % and 97.13 % for the positively charged nanoparticles interacting with the cell membrane. Freshness tests showed that the EA/SA/SNPs packaging film could delay the quality deterioration of fresh tomatoes. This composite film can slow down spoilage bacteria proliferation and prolongs food's preservation period by eight days at ambient temperature.
Assuntos
Alginatos , Antibacterianos , Antioxidantes , Embalagem de Alimentos , Lignina , Nanopartículas , Alginatos/química , Alginatos/farmacologia , Embalagem de Alimentos/métodos , Nanopartículas/química , Antioxidantes/farmacologia , Antioxidantes/química , Antibacterianos/farmacologia , Antibacterianos/química , Lignina/química , Lignina/análogos & derivados , Lignina/farmacologia , Escherichia coli/efeitos dos fármacos , Escherichia coli/crescimento & desenvolvimento , Staphylococcus aureus/efeitos dos fármacos , Permeabilidade , VaporRESUMO
The utilization of lignosulfonate (LS) as a naturally derived biopolymer sourced from lignin in soil stabilization has gained significant attention in recent years. Its intermolecular interaction, hydrophobic and hydrophilic effects, adhesive and binding properties, erosion control abilities, compatibility with various soil types, and environmental sustainability make it a promising alternative to traditional soil stabilizers as well as highlighting its importance. By integrating LS into soil stabilization practices, soil properties can be enhanced, and an eco-friendlier approach can be adopted in the construction sector. This comprehensive review paper extensively examines the applications and structure of LS, as well as their efficacy and mechanisms on a micro-level scale. Afterward, it discusses the geotechnical characteristics of LS-treated soils, including consistency characteristics, dispersivity properties and erosion behavior, electrical conductivity, compaction parameters, permeability and hydraulic conductivity, compressibility characteristics, swelling potential, strength and stiffness properties, durability, and cyclic loading response. In general, LS incorporation into the soils could enhance the geotechnical properties. For instance, the Unconfined Compressive Strength (UCS) of fine-grained soils was observed to improve up to 105 %, while in the case of granular soils, the improvement can be as high as 450 %. This review also examines the economic and environmental efficiency, as well as challenges and ways forward related to LS stabilization. This can lead to economic and environmental benefits given the abundance of LS as a plant polymer for cleaner production and owing to its carbon neutrality and renewability.
RESUMO
Herein, a straightforward protocol was developed for the one-pot synthesis of N-doped lignosulfonate-derived carbons (NLDCs) with a tunable porous structure using natural amino acids-templated self-assembly strategy. Specifically, histidine was employed as a template reagent, leading to the preparation of 10-NLDC-21 with remarkable characteristics, including the large specific surface area (SBET = 1844.5 m2/g), pore volume (Vmes = 1.22 cm3/g) and efficient adsorption for atrazine (ATZ) removal. The adsorption behavior of ATZ by NLDCs followed the Langmuir and pseudo-second-order models, suggesting a monolayer chemisorption nature of ATZ adsorption with the maximum adsorption capacity reached up to 265.77 mg/g. Furthermore, NLDCs exhibited excellent environmental adaptability and recycling performance. The robust affinity could be attributed to multi-interactions including pore filling, electrostatic attraction, hydrogen bonding and π-π stacking between the adsorbents and ATZ molecules. This approach offers a practical method for exploring innovative bio-carbon materials for sewage treatment.
Assuntos
Atrazina , Carbono , Lignina , Poluentes Químicos da Água , Atrazina/química , Lignina/química , Lignina/análogos & derivados , Porosidade , Adsorção , Carbono/química , Concentração de Íons de Hidrogênio , Poluentes Químicos da Água/química , Poluentes Químicos da Água/isolamento & purificação , Purificação da Água/métodos , CinéticaRESUMO
The phenomenon of overlapping double layers due to micropores inhibits capacitive deionization performance, which is improved by increasing the pore size. In this study, a novel ternary composite electrode (sodium lignosulfonate/reduced graphene oxide/cobalt sulfide, LGC) was designed using a two-step hydrothermal method. CoS with high pseudocapacitance modifies sodium lignosulfonate and graphene connected by hydrogen bonding, benefiting from the constitutive steric structure. The electrochemical performance was significantly enhanced, and the desalination capacity substantially improved. The LGC electrode specific capacitance was as high as 354.47 F g-1 at a 1 A g-1 current density. The desalination capacity of the capacitive deionization device comprising LGC and activated carbon in 1 M NaCl electrolyte reached 28.04 mg g-1 at an operating condition of 1.2 V, 7 mL min-1. Additionally, the LGC electrodes degraded naturally post the experiment by simply removing the CoS, suggesting that the LGC composites are promising material for capacitive deionization electrodes.
Assuntos
Cobalto , Eletrodos , Grafite , Lignina , Grafite/química , Lignina/química , Lignina/análogos & derivados , Cobalto/química , Porosidade , Purificação da Água/métodos , Capacitância Elétrica , Cloreto de Sódio/químicaRESUMO
In this study, a cost-effective and stable heterogeneous acidic carbocatalyst (CZnLS950) derived from Na-lignosulfonate (LS), a side product of the paper industry, was employed to produce hydrocarbon fuels through the pyrolysis of waste cooking oil (WCO) and crude natural-oil extracted from sunflower seeds, aligning with the principles of the circular economy. To enhance its practicality in industrial settings, the catalyst was synthesized in pellet form, enabling easy separation from the biofuel produced during the reaction. CZnLS950 exhibited remarkable catalytic efficiency in the pyrolysis of WCO, resulting in a 71â wt. % liquid biofuel yield under mild conditions. This performance is attributed to the unique synthesis procedure of acidic carbocatalyst, which utilizes LS and nano ZnO (20â nm) to create a hierarchical pore structure with acidic properties (1.1â mmol of NH3â g-1). Stability and reusability of the carbocatalyst were evaluated, and the results showed excellent stability with small catalytic deactivation (~5â wt. %) after the fourth use. Attempts at distinct catalytic mechanisms for WCO and sunflower seeds crude natural-oil pyrolysis were provided to understand the processes involved in obtaining the two different biofuels produced. Overall, this study sets the stage for exploring Lignosulfonate-based materials to achieve renewable biofuel from recycling streams.
RESUMO
Improving the thermal storage stability of nanosuspension concentrate (SC) prepared from low-melting-point pesticide is a recognized problem. In this work, using pyraclostrobin as the raw material, 25 wt% of pyraclostrobin nano-SC was prepared through a water-based grinding method, and the optimal grinding conditions were obtained as follows: a grinding time of 23 h, D-3911 as dispersant and a dispersant dosage of 12 wt%. The pyraclostrobin nano-SC D90 size prepared based on this best formula was 216 nm. Adding glycerin could improve the stability of nano-SC at room temperature, but its thermal storage stability was still poor. For this problem, sodium lignosulfonate and cetyltrimethylammonium bromide (NaLS/CTAB) colloidal spheres were prepared through electrostatic and hydrophobic self-assembly and characterized. The delamination and precipitation of nano-SC can be significantly improved by adding an appropriate amount of colloidal spheres, and the nano-SC D90 size decreased from 2726 to 1023 nm after 7 days of thermal storage. Farmland experiments indicated the control efficiency of pyraclostrobin nano-SC against flowering cabbage downy mildew disease was about 30% higher than that of SC. Especially after adding the wetting agent, the effect of nano-SC could be comparable to that of commercial Kairun (currently the best pyraclostrobin formulation in the world).
RESUMO
High-value utilization of bleached lignin has been widely used in different fields, whereas the investigation on darkened lignin in composite materials was often ignored. In this work, a sort of eco-friendly and structurally robust sodium carboxymethyl cellulose (CMC)/polyvinyl alcohol (PVA)/sodium lignosulfonate (SLS) black composite mulch film was elaborately designed. The chelation and redox reaction effect between Fe ions and SLS lead to the formation of a more quinones structure on lignin, darkening both lignin and the mulch films. The chelation effect between Fe ions and biopolymer formed three-dimensional structures, which can be used as sacrifice bonds to dissipate energy and improve the mechanical properties of the composite films. In particular, the maximum elongation at break and toughness increased from 48.4 % and 1141 kJ/m3 for the CMC/PVA film to 210.9 % and 1426 kJ/m3 for the optimized CMC/PVA/SLS/Fe black mulch film, respectively. In addition, the optimized black mulch film also possesses good soil water retention, thermal preservation effect, controlled urea release, and well biodegradability. This work offered a novel strategy for designing eco-friendly black mulch with reinforced mechanical strength, slow-release urea, soil moisture retention, and heat preservation performances.
Assuntos
Ferro , Lignina , Agricultura/métodos , Solo , Álcool de Polivinil/química , Ureia , SódioRESUMO
Ruthenium (Ru) nanoparticles dispersed on carbon support are promising electrocatalysts for hydrogen evolution reaction (HER) due to strong electronic metal-carbon interactions (EMCIs). Defects engineering in carbon supports is an effective strategy to adjust EMCIs. We prepared nitrogen/sulfur co-doped carbon supported Ru nanoparticles (Ru@N/S-LC) using sodium lignosulfonate and urea as feedstocks. Intrinsic S dopants from sodium lignosulfonate create rich S defects, thus enhancing the EMCIs within Ru@N/S-LC, leading a faster electron transfer between Ru nanoparticles and N/S-LC compared with N-doped carbon supported Ru nanoparticles (Ru@N-CC). The resulting Ru@N/S-LC exhibits an enhanced work function and a down-shifted d-band center, inducing stronger electron capturing ability and weaker hydrogen desorption energy than Ru@N-CC. Ru@N/S-LC requires only 7 and 94 mV overpotential in acidic medium and alkaline medium to achieve a current density of 10 mA cm-2. Density Functional Theory (DFT) calculations were utilized to clarify the impact of sulfur (S) doping and the mechanism underlying the notable catalytic activity of Ru@N/S-LC. This study offers a perspective for utilizing the natural dopants of biomass to adjust the EMCIs for electrocatalysts.
RESUMO
The aminated sodium lignosulfonate (AELS) was prepared through a Mannich reaction and characterized via FT-IR, TG, SEM and XPS in this study. Subsequently, the adsorption capacity of AELS for methyl blue (MB) was evaluated under various conditions such as pH, adsorbent dosage, contact time, initial concentration and temperature. The adsorption kinetics, isotherms and thermodynamics of AELS for methyl blue were investigated and analyzed. The results were found to closely adhere to the pseudo-second-order kinetic model and Langmuir isotherm model, suggesting a single-molecular-layer adsorption process. Notably, the maximum adsorption capacity of AELS for methyl blue (153.42 mg g-1) was achieved under the specified conditions (T = 298 K, MAELS = 0.01 g, pH = 6, VMB = 25 mL, C0 = 300 mg L-1). The adsorption process was determined to be spontaneous and endothermic. Following five adsorption cycles, the adsorption capacity exhibited a minimal reduction from 118.99 mg g-1 to 114.33 mg g-1, indicating good stability. This study contributes to the advancement of utilizing natural resources effectively and sustainably.
RESUMO
Synthetic dyes are prone to water pollution during use, jeopardizing biodiversity and human health. This study aimed to investigate the adsorption and photocatalytic assist potential of sodium lignosulfonate (LS) in in situ reduced silver nanoparticles (AgNPs) and chitosan (CS)-loaded silver nanoparticles (CS-LS/AgNPs) as adsorbents for Rhodamine B (RhB). The AgNPs were synthesized by doping LS on the surface of chitosan for modification. Fourier transform infrared (FT-IR) spectrometry, energy-dispersive spectroscopy (EDS), scanning electron microscopy (SEM), X-ray diffraction (XRD), and X-ray photoelectron spectroscopy (XPS) were used to confirm the synthesis of nanomaterials. The adsorption and photocatalytic removal experiments of RhB were carried out under optimal conditions (initial dye concentration of 20 mg/L, adsorbent dosage of 0.02 g, time of 60 min, and UV power of 250 W), and the kinetics of dye degradation was also investigated, which showed that the removal rate of RhB by AgNPs photocatalysis can reach 55%. The results indicated that LS was highly effective as a reducing agent for the large-scale production of metal nanoparticles and can be used for dye decolorization. This work provides a new catalyst for the effective removal of dye from wastewater, and can achieve high-value applications of chitosan and lignin.
RESUMO
During the construction of coalbed methane extraction wells, cementing cement sheath is crucial for the stability and sealing of surface wells. One effective method to enhance these properties is the addition of lignosulfonate. However, the mechanism of the effect of calcium lignosulfonate on the whole process of cement hydration is still unclear. In this paper, the water distribution and variation characteristics of calcium lignosulfonate modified cement paste were revealed by low-field nuclear magnetic resonance technology, and the hydration ion experiment of modified cement was carried out to obtain the variation characteristics of hydration ions of modified cementing cement. Finally, the formation mechanism of hydration products was clarified by analyzing the phase change of modified cement stone. The results indicate that the cement paste's hydration process can be divided into four stages: dissolution, crystallization, acceleration, and decline. During the dissolution stage, calcium lignosulfonate's air entraining effect maintains the cement paste in a stable suspension state. In the crystallization stage, calcium lignosulfonate's electro-repulsion delays the formation of hydration products and the hydration process. During the acceleration stage, the addition of calcium lignosulfonate reduces bound water formation in the cement slurry's flocculation structure, and the released filled water participates more in the hydration reaction, reducing the total relaxation signal's increasing trend. In the decline stage, the cement paste has solidified, and the system's water is primarily in the porous medium. The research results have practical guiding significance for the addition of calcium lignosulfonate in cementing operations.
RESUMO
Developing high-performance lignin anti-corrosive waterborne epoxy (WEP) coatings is conducive to the advancement of environmentally friendly coatings and the value-added utilization of lignin. In this work, a functionalized biomass waterborne epoxy composite coating is prepared using quaternized sodium lignosulfonate (QLS) as a functional nanofiller for mild carbon steel protection. The results showed that QLS has excellent dispersion and interface compatibility within WEP, and its abundant phenolic hydroxyl, sulfonate, quaternary ammonium groups, and nanoparticle structure endowed the coating with excellent corrosion inhibition and superior barrier properties. The corrosion inhibition efficiency of 100 mg L-1 QLS in carbon steel immersed in a 3.5 wt% NaCl solution reached 95.76%. Furthermore, the coating maintained an impedance modulus of 2.29 × 106 Ω cm2 (|Z|0.01 Hz) after being immersed for 51 days in the high-salt system. In addition, QLS imparted UV-blocking properties and thermal-oxygen aging resistance to the coating, as evidenced by a |Z|0.01 Hz of 1.04 × 107 Ω cm2 after seven days of UV aging while still maintaining a similar magnitude as before aging. The green lignin/WEP functional coatings effectively withstand the challenging outdoor environment characterized by high salt concentration and intense UV radiation, thereby demonstrating promising prospects for application in metal protection.
RESUMO
Wood-based panels find widespread application in the furniture and construction industries. However, over 90â¯% of adhesives used are synthesized with formaldehyde, leading to formaldehyde emission and associated health risks. In this study, an entirely bio-based adhesive (OSL) was innovatively proposed through the condensation of multi-aldehyde derived from the oxidization of sucrose (OS) with sodium lignosulfonate (L). This approach positioned oxidized sucrose (OS) as a viable substitute for formaldehyde, ensuring safety, simplicity, and enhance water resistance upon reaction with L. The optimization of the OSL adhesive preparation process involved determining the oxidant level for high sucrose conversion to aldehyde (13â¯% based on sucrose), the mass ratio of OS to L (0.8), and hot-pressing temperature (200⯰C). Notably, the shear strength of 3-plywood bonded with the developed adhesive (1.04â¯MPa) increased to 1.42â¯MPa after being immersed in hot water at 63⯱â¯3⯰C for 3â¯h. Additionally, the plywood specimens exhibited excellent performance after soaking in boiling water for 3â¯h, resulting in a shear strength of 1.03â¯MPa. Chemical analysis using Fourier-transform infrared spectroscopy (FTIR), 1H nuclear magnetic resonance (NMR), and X-ray photoelectron spectroscopy (XPS) confirmed an addition reaction between L and OS, forming a dense network structure, effectively enhanceing the water resistance of OSL adhesives. Furthermore, compared with lignin-formaldehyde resin adhesive (LF), the OSL adhesive exhibited superior wet shear strength. This study offered an innovative approach for developing lignin-based adhesives utilizing a biomass aldehyde (OS), as a promising substitute for formaldehyde in the wood industry. The findings indicated that this approach may advance lignin-based adhesives, ensuring resistance to strength deterioration under highly humid environmental conditions.
Assuntos
Lignina , Água , Lignina/química , Aldeídos , Adesivos/química , Formaldeído/química , SacaroseRESUMO
The massive production of food waste and plastic pollution necessitates innovative solutions. This study reports the first fabrication of a flexible chitosan (CH) film reinforced with lignosulfonate (LS) derived from pulping byproduct as a sustainable alternative to synthetic food packaging. The CH/LS composite film was prepared by a simple casting method with varying LS contents of 1 % and 2 %. Compared to CH film, the addition of 2 % LS increased the tensile strength by over 4 times and decreased water vapor permeability by 11 %. Moreover, the CH/LS film exhibited excellent UV-shielding properties. This novel use of LS to reinforce CH film presents an eco-friendly active packaging material. When used to package cherry tomatoes for 2 weeks, the CH/LS film effectively maintained fruit freshness and hardness while minimizing weight loss. This work provides new scientific evidence on the optimized preparation and application of CH/LS composite films from renewable resources for food preservation.