Anode-Free Lithium-Sulfur Batteries with a Rare-Earth Triflate as a Dual-Function Electrolyte Additive.

Anode-free lithium-sulfur batteries feature a cell design with a fully lithiated cathode and a bare current collector as an anode to control the total amount of lithium in the cell. The lithium stripping and deposition are key factors in designing an anode-free full cell to realize a practical cell configuration. To realize effective anode protection and achieve a good performance of the anode-free full cell, manipulation of the electrolyte chemistry toward the modification of the solid-electrolyte interphase on the anode is considered a feasible approach. In this study, the use of neodymium triflate, Nd(OTf)3, as a dual-function electrolyte additive is demonstrated to promote homogeneous catalysis on the cathode conversion reactions and the anode stabilization. Nd(OTf)3 not only facilitates the conversion reaction by promoting the polysulfide adsorption but also effectively protects the lithium-metal anode and stabilizes the lithium stripping and deposition during cycling. With this electrolyte modification, both Li∥Li2S half cells and Ni∥Li2S anode-free full cells support a high areal capacity of 5.5-7.0 mA h cm-2 and maintain a high Coulombic efficiency of 94-95% during cycling.

Catalytic Cleavage of the C-O Bonds in Lignin and Lignin Model Compounds by Metal Triflate Catalysts.

The effective cleavage of C-O bonds in linkages of lignin was one of the significant strategies promoting lignin valorization. Herein, the strategy of C-O bonds cleavage of lignin using metal triflate as the catalyst was developed. The carboxylic acid or alcohol could be used as the nucleophile to stabilize the reactive intermediates formed during the depolymerization of lignin, and the corresponding ester/ether compounds could be obtained. This catalytic system was suitable for the C-O bond cleavage in α-O-4 and ß-O-4 linkages with excellent efficiency. Additionally, reaction conditions were optimized. The reaction mixture was detected by 1 H NMR, and no other byproducts were found. As for treated lignin samples, the cleavage of C-O bonds in linkages was determined by 2D HSQC NMR, the increased content of the phenol hydroxyl group was proved by FT-IR, and the reduced molecular weight was investigated by GPC. Furthermore, multiple phenolic compounds were detected by GC-MS in the reaction mixtures.

Selective Hydrogenolysis of Furfural Derivative 2-Methyltetrahydrofuran into Pentanediol Acetate and Pentanol Acetate over Pd/C and Sc(OTf)3 Cocatalytic System.

It is of great significance to convert platform molecules and their derivatives into high value-added alcohols, which have multitudinous applications. This study concerns systematic conversion of 2-methyltetrahydrofuran (MTHF), which is obtained from furfural, into 1-pentanol acetate (PA) and 1,4-pentanediol acetate (PDA). Reaction parameters, such as the Lewis acid species, reaction temperature, and hydrogen pressure, were investigated in detail. 1 H NMR spectroscopy and reaction dynamics study were also conducted to help clarify the reaction mechanism. Results suggested that cleavage of the primary alcohol acetate was less facile than that of the secondary alcohol acetate, with the main product being PA. A PA yield of 91.8 % (150 °C, 3 MPa H2 , 30 min) was achieved by using Pd/C and Sc(OTf)3 as a cocatalytic system and an 82 % yield of PDA was achieved (150 °C, 30 min) by using Sc(OTf)3 catalyst. Simultaneously, the efficient conversion of acetic esters into alcohols by simple saponification was carried out and led to a good yield.

Effective Release of Lignin Fragments from Lignocellulose by Lewis Acid Metal Triflates in the Lignin-First Approach.

Adding value to lignin, the most complex and recalcitrant fraction in lignocellulosic biomass, is highly relevant to costefficient operation of biorefineries. We report the use of homogeneous metal triflates to rapidly release lignin from biomass. Combined with metal-catalyzed hydrogenolysis, the process separates woody biomass into few lignin-derived alkylmethoxyphenols and cellulose under mild conditions. Model compound studies show the unique catalytic properties of metal triflates in cleaving lignin-carbohydrate interlinkages. The lignin fragments can then be disassembled by hydrogenolysis. The tandem process is flexible and allows obtaining good aromatic monomer yields from different woods (36-48 wt %, lignin base). The cellulose-rich residue is an ideal feedstock for established biorefining processes. The highly productive strategy is characterized by short reaction times, low metal triflate catalyst requirement, and leaving cellulose largely untouched.

A Simple, Effective, Green Method for the Regioselective 3-Acylation of Unprotected Indoles.

A fast and green method is developed for regioselective acylation of indoles in the 3-position without the need for protection of the NH position. The method is based on Friedel-Crafts acylation using acid anhydrides. The method has been optimized, and Y(OTf)3 in catalytic amounts is found to be the best catalyst together with the commercially available ionic liquid [BMI]BF4 (1-butyl-3-methylimidazolium tetrafluoro-borate) as solvent. The reaction is completed in a very short time using monomode microwave irradiation. The catalyst can be reused up to four times without significant loss of activity. A range of substituted indoles are investigated as substrates, and thirteen new compounds have been synthesized.