Task decomposition strategy based on machine learning for boosting performance and identifying mechanisms in heterogeneous activation of peracetic acid process.

Heterogeneous activation of peracetic acid (PAA) process is a promising method for removing organic pollutants from water. Nevertheless, this process is constrained by several complex factors, such as the selection of catalysts, optimization of reaction conditions, and identification of mechanism. In this study, a task decomposition strategy was adopted by combining a catalyst and reaction condition optimization machine learning (CRCO-ML) model and a mechanism identification machine learning (MI-ML) model to address these issues. The Categorical Boosting (CatBoost) model was identified as the best-performing model for the dataset (1024 sets and 7122 data points) in this study, achieving an R2 of 0.92 and an RMSE of 1.28. Catalyst composition, PAA dosage, and catalyst dosage were identified as the three most important features through SHAP analysis in the CRCO-ML model. The HCO3- is considered the most influential water matrix affecting the k value. The errors between all reverse experiment results and the predictions of the CRCO-ML and MI-ML models were <10 % and 15 %, respectively. This interdisciplinary work provides novel insights into the design and application of the heterogeneous activation of PAA process, significantly contributing to the rapid development of this technology.

Advances of carbon-based materials for activating peracetic acid in advanced oxidation processes: A review.

In recent years, the peracetic acid (PAA)-based advanced oxidation process (AOPs) has garnered significant attention in the field of water treatment due to rapid response time and environmentally-friendliness. The activation of PAA systems by diverse carbon-based materials plays a crucial role in addressing emerging environmental contaminants, including various types, structures, and modified forms of carbon materials. However, the structural characteristics and structure-activity relationship of carbon-based materials in the activation of PAA are intricate, while the degradation pathways and dominant active species exhibit diversity. Therefore, it is imperative to elucidate the developmental process of the carbon-based materials/PAA system through resource integration and logical categorization, thereby indicating potential avenues for future research. The present paper comprehensively reviews the structural characteristics and action mechanism of carbon-based materials in PAA system, while also analyzing the development, properties, and activation mechanism of heteroatom-doped carbon-based materials in this system. In conclusion, this study has effectively organized the resources pertaining to prominent research direction of comprehensive remediation of environmental water pollution, thereby elucidating the underlying logic and thought process. Consequently, it establishes robust theoretical foundation for future investigations and applications involving carbon-based materials/PAA system.

Reuterin Enhances the Efficacy of Peracetic Acid Against Multi-species Dairy Biofilm.

Biofilms may contain pathogenic and spoilage bacteria and can become a recurring problem in the dairy sector, with a negative impact on product quality and consumer health. Peracetic acid (PAA) is one of the disinfectants most frequently used to control biofilm formation and persistence. Though effective, it cannot be used at high concentrations due to its corrosive effect on certain materials and because of toxicity concerns. The aim of this study was to test the possibility of PAA remaining bactericidal at lower concentrations by using it in conjunction with reuterin (3-hydroxypropionaldehyde). We evaluated the efficacy of PAA in pure form or as BioDestroy®, a PAA-based commercial disinfectant, on three-species biofilms formed by dairy-derived bacteria, namely Pseudomonas azotoformans PFlA1, Serratia liquefaciens Sl-LJJ01, and Bacillus licheniformis Bl-LJJ01. Minimum inhibitory concentrations of the three agents were determined for each bacterial species and the fractional inhibitory concentrations were then calculated using the checkerboard assay. The minimal biofilm eradication concentration (MBEC) of each antibacterial combination was then calculated against mixed-species biofilm. PAA, BioDestroy®, and reuterin showed antibiofilm activity against all bacteria within the mixed biofilm at respectively 760 ppm, 450 ppm, and 95.6 mM. The MBEC was lowered significantly to 456 ppm, 337.5 ppm, and 71.7 mM, when exposed to reuterin for 16 h followed by contact with disinfectant. Combining reuterin with chemical disinfection shows promise in controlling biofilm on food contact surfaces, especially for harsh or extended treatments. Furthermore, systems with reuterin encapsulation and nanotechnologies could be developed for sustainable antimicrobial efficacy without manufacturing disruptions.

Rapid Peracetic acid activation by CoO under neutral condition: The contribution of multiple reactive species.

This paper proposes a novel process of cobalt monoxide (CoO)-activated peracetic acid (PAA) for treating emerging micropollutant in water. PAA was activated under neutral conditions by combining a dominant heterogeneous phase on the catalyst surface and a homogeneous phase by dissolved Co2+. The system produced several reactive oxygen species, including hydroxyl radicals (HO∙HO•), singlet oxygen (1O2), organic radicals (RO•(CH3C(O)O•, CH3C(O)OO•) and high-valent cobalt (Co(IV)). Organic radicals and high-valent cobalt primarily drove the emerging micropollutants degradation, interacting via electron transfer. Further density functional theory calculations supported that the spontaneous adsorption of PAA onto the catalyst could break peroxy bonds that generate radicals. Furthermore, the CoO surface structure underwent minimal changes during the reaction, making it highly reusable. Thus, the novel CoO/PAA system could be an effective advanced oxidation process for water treatment.

Effective Decontamination Methods for Shiga Toxin-producing Escherichia coli on Beef Surfaces for Application in Beef Carcass Hygiene.

Effective methods for decontamination of Shiga toxin-producing Escherichia coli (STEC) on beef were evaluated by 48 mL spraying, 100 mL, and 500 mL flushing with ethanol, hydrogen peroxide, peracetic acid, acidified sodium chlorite, and sodium hypochlorite in this study. The flushing with 500 mL of 1,000 ppm peracetic acid was most effective, reducing pathogens by 2.8 log CFU/cm2, followed by 1,200 ppm acidified sodium chlorite. The spraying with 1,000 ppm peracetic acid reduced pathogens by 1.6 log CFU/cm2. The flushing with 500 mL of 200 and 500 ppm acidified sodium chlorite, and 50, 100, 200, and 500 ppm peracetic acid significantly reduced the STEC population compared with those treated with distilled water (p < 0.05), reducing pathogens by 2.1, 2.4, 1.6, 1.8, 2.1 and 2.4 log CFU/cm2, respectively. Additionally, the flushing with 500 mL of 200 and 500 ppm acidified sodium chlorite significantly changed the color of beef samples (p < 0.05), whereas 100-500 ppm peracetic acid did not significantly change the color (p > 0.05). The flushing with 500 mL of 200 and 500 ppm acidified sodium chlorite and 200 and 500 ppm peracetic acid significantly changed the odor of beef samples compared with those treated with distilled water (p < 0.05). There was no difference in the reduction of STEC population between peracetic acid treatment at 25 °C and 55 °C, with or without washing with sterilized distilled water after decontamination. Washing with distilled water after flushing with peracetic acid tended to reduce the odor of the samples. These results suggest that treatment with 100, 200, and 500 ppm peracetic acid, followed by washing with distilled water, might reduce the STEC population without retaining the odor of the sanitizer.

Revealing the vital role of sulfur site on the surface of pyrite in 1O2 formation for promoting ciprofloxacin degradation via peracetic acid activation.

Pyrite has been widely utilized to activate oxidants for water treatment, yet the regulation of reactive oxygen species (ROS) by sulfur sites on its surface has been overlooked. In this study, the surface sulfur sites were regulated by thermal modification of natural pyrite in the N2 atmosphere (denoted as P-X, where X represented pyrolysis temperatures ranging from 400 to 700 °C), and these modified pyrites were employed to activate peracetic acid (PAA) for ciprofloxacin (CIP) degradation. The results revealed that the degradation rate of CIP increased as the reduced sulfur content increased, with the P600/PAA system achieving the highest apparent degradation rate (kobs = 0.0999 min-1). Quenching experiments and electron paramagnetic resonance (EPR) analysis identified various ROS involved in the P-X/PAA system, with hydroxyl radical (·OH) and singlet oxygen (1O2) identified as dominant reactive species responsible for CIP degradation. The reduced sulfur sites served as the primary active sites facilitating the conversion of organic radicals (·CH3C(O)OO) into superoxide radicals (·O2-) and 1O2. Furthermore, the P600/PAA system demonstrated robust adaptability under both acidic and neutral pH conditions, efficiently degrading CIP even in the presence of complex matrices such as Cl-, NO3-, SO42-, NH4+, or humic acid (HA) in water bodies, although HCO3- was found to inhibit CIP degradation. This study significantly enhances our understanding of the interaction between reduced sulfur sites and ROS in PAA-based advanced oxidation processes (AOPs), offering a promising technology for efficient antibiotic treatment in water purification.

Tracking the transformation of extracellular polymeric substances during the ultraviolet/peracetic acid disinfection process: Emphasizing on molecular-level analysis and overlooked mechanisms.

In this study, the transformation mechanisms of extracellular polymeric substances (EPS) during ultraviolet/peracetic acid (UV/PAA) disinfection were elucidated based on multiple molecular-level analyses. After UV/PAA disinfection, the contents of soluble EPS (S-EPS), loosely bound EPS (LB-EPS) and tightly bound EPS (TB-EPS) were reduced by 70.47 %, 57.05 % and 47.46 %, respectively. Fluorescence excitation-emission matrix-parallel factor and Fourier transform ion cyclotron resonance mass spectrometry analyses showed that during UV/PAA disinfection, EPS was transformed from the state characterized by high aromaticity, low saturation and low oxidation to the one with reduced aromaticity, increased saturation and higher oxidation. Specifically, sulfur-containing molecules (CHOS, CHONS, etc.) in EPS were converted into highly saturated and oxidized species (such as CHO), with the aromaticity index (AImod) decreasing by up to 53.84 %. Molecular characteristics analyses further indicated that saturation degree, oxidation state of carbon and molecular weight exhibited the most significant changes in S-EPS, LB-EPS and TB-EPS, respectively. Additionally, mechanistic analysis revealed that oxygen addition reaction was the predominant reaction for S-EPS (+O) and TB-EPS (+3O) (accounting for 31.78 % and 36.47 %, respectively), while the dealkylation was the main reaction for LB-EPS (29.73 %). The results were consistent with functional groups sequential responses analyzed by Fourier transform infrared and two-dimensional correlation spectroscopy, and were further verified by density functional theory calculations. Most reactions were thermodynamically feasible, with reaction sites predominantly located at functional groups such as CO, CO, CN and aromatic rings. Moreover, metabolomics analysis suggested that changes in metabolites in raw secondary effluent during UV/PAA disinfection were strongly correlated with EPS transformation. Our study not only provides a strong basis for understanding EPS transformation during UV/PAA disinfection at molecular-level but also offers valuable insights for the application this promising disinfection process.

Co-infection of Liburna oophaga sp. nov. and Ikanecator primus on cuttlefish (Sepia pharaonis) eggs and the effectiveness of peracetic acid as a treatment.

The cuttlefish Sepia pharaonis species complex is emerging as a promising set of organisms for research in neuroscience, the behavioral sciences, and commercial aquaculture. At the same time, information about pathogens and diseases that could affect cuttlefish cultivation in intensive aquaculture settings remains limited. Our study has identified two species of parasite, the protozoan Liburna oophaga sp. nov. and the metazoan Ikanecator primus, that co-infect cuttlefish eggs, increasing mortality and reducing hatching rates. L. oophaga sp. nov. is reported here for the first time to enhance mortality during the incubation period by inducing deformity in cuttlefish eggs. We investigated the application of peracetic acid to parasite elimination during cuttlefish egg incubation. When cuttlefish eggs were treated with a peracetic acid containing product (PAA-product); 35 mg/L PAA + 15 mg/L H2O2, L. oophaga on the surfaces of the eggs were eliminated within 10 min. PAA-product; 70 mg/L PAA + 30 mg/L H2O2 was required to achieve the same effect for I. primus. Immersion treatment with PAA-product at 70 mg/L PAA + 30 mg/L H2O2 reduced parasitic load and improved survival of cuttlefish embryos and hatchling size, demonstrating that PAA product can inhibit and control parasitic co-infections in cephalopod culture.

Peracetic Acid Efficacy on Disinfection of Photostimulable Phosphor Plates.

OBJECTIVES: To evaluate the antimicrobial efficacy of white vinegar, acetic acid and peracetic acid on photostimulable phosphor (PSP) plates disinfection, and to assess the disinfectant influence on the radiographic quality. METHODS: Eight PSP plates (Express system) were contaminated with Streptococcus mutans and Candida albicans. These plates were wiped with tissues without any substance, with white vinegar, acetic acid, and peracetic acid, followed by an agar imprint. Number of microbial colonies formed was recorded. Afterwards, the quality of radiographs was tested using the more efficient disinfectant. Before disinfection and after every five disinfections, two radiographs of an acrylic-block and two radiographs of an aluminum step-wedge were acquired for each plate. Density, noise, uniformity, and contrast were analyzed. Three oral radiologists evaluated the images for the presence of artifacts. One-way Analysis of Variance compared changes on gray values among the disinfections (α = 0.05). Intra- and inter-examiner agreement for the presence of artifacts was calculated by weighted Kappa. RESULTS: Peracetic acid was the only one that eliminated both microorganisms. Density and uniformity decreased after 100 disinfections, and contrast changed without a pattern in the course of disinfections (P ≤ 0.05). Small artifacts were observed after 30 disinfections. Intra- and inter-examiner agreements were almost perfect. CONCLUSIONS: Disinfection with peracetic acid eliminated both microorganisms. However, it also affected density, uniformity and contrast of radiographs, and led to the formation of small artifacts.

Valorizing waste activated sludge incineration ash to S-doped Fe2+@Zeolite 4A catalyst for the treatment of emerging contaminants exemplified by sulfamethoxazole.

The global attention towards waste management and valorization has led to significant interest in recovering valuable components from sludge incineration ash (SIA) for the synthesis of functional environmental materials. In this study, the SIA was converted to an S-doped Fe2+-zeolite type catalyst (FZA) for the treatment of emerging contaminants (ECs), exemplified by sulfamethoxazole (SMX). Results demonstrate that FZA effectively catalyzed the activation of peracetic acid (PAA), achieving a remarkable degradation of 99.8% under optimized conditions. Mechanistic investigations reveal that the FZA/PAA system can generate ·OH, 1O2, O2·ï¼, and Fe(Ⅳ), with ·OH playing a dominant role in ECs degradation. Additionally, the doped S facilitated electrochemical performance, Fe2+ regeneration and fixation in FZA. Practical application elucidated that the FZA/PAA system can work in complex environments to degrade various ECs without generating high-toxicity ingredients. Overall, valorizing SIA to FZA provides dual achievement in waste management and ECs removal.

Revisiting iodide species transformation in peracetic acid oxidation: unexpected role of radicals in micropollutants decontamination and iodate formation.

Peracetic acid (PAA) is an alternative disinfectant for saline wastewaters, and hypohalous acids are typically regarded as the reactive species for oxidation and disinfection. However, new results herein strongly suggest that reactive radicals instead of HOI primarily contributed to decontamination during PAA treatment of iodine-containing wastewater. The presence of I- could greatly accelerate the micropollutants (e.g., sulfamethoxazole (SMX)) transformation by PAA. Chemical probes experiments and electron paramagnetic resonance analysis demonstrate acetylperoxyl radical rather than reactive iodine species primarily responsible for SMX degradation. The kinetic model was developed to further distinguish and quantify the contribution of radicals and iodine species, as well as to elucidate the transformation pathways of iodine species. Density functional theory calculations indicated that the nucleophilic attack of I- on the peroxide bond of PAA could form unstable O-I bond, with the transition state energy barrier for radical generation lower than that for HOI formation. The transformation of iodine species was regulated by acetylperoxyl radical to generate nontoxic IO3-, greatly alleviating the iodinated DBPs formation in saline wastewaters. This work provides mechanistic insights in radical-regulated iodine species transformation during PAA oxidation, paving the way for the development of viable and eco-friendly technology for iodide containing water treatment.

Effect of microwaves combined with peracetic acid to improve the dewatering performance of residual sludge.

The activated sludge process plays a crucial role in modern wastewater treatment plants. During the treatment of daily sewage, a large amount of residual sludge is generated, which, if improperly managed, can pose burdens on the environment and human health. Additionally, the highly hydrated colloidal structure of biopolymers limits the rate and degree of dewatering, making mechanical dewatering challenging. This study investigates the impact and mechanism of microwave irradiation (MW) in conjunction with peracetic acid (PAA) on the dewatering efficiency of sludge. Sludge dewatering effectiveness was assessed through capillary suction time (CST) and specific resistance to filtration (SRF). Examination of the impact of MW-PAA treatment on sludge dewatering performance involved assessing the levels of extracellular polymeric substances (EPS), employing three-dimensional excitation-emission matrix (3D-EEM), Fourier transform-infrared spectroscopy (FT-IR), and scanning electron microscopy. Findings reveal that optimal dewatering performance, with respective reductions of 91.22% for SRF and 84.22% for CST, was attained under the following conditions: microwave power of 600 W, reaction time of 120 s, and PAA dosage of 0.25 g/g MLSS. Additionally, alterations in both sludge EPS composition and floc morphology pre- and post-MW-PAA treatment underwent examination. The findings demonstrate that microwaves additionally boost the breakdown of PAA into •OH radicals, suggesting a synergistic effect upon combining MW-PAA treatment. These pertinent research findings offer insights into employing MW-PAA technology for residual sludge treatment.

Exploring the viability of peracetic acid-mediated antibiotic degradation in wastewater through activation with electrogenerated HClO.

Electrochemical advanced oxidation processes (EAOPs) face challenging conditions in chloride media, owing to the co-generation of undesirable Cl-disinfection byproducts (Cl-DBPs). Herein, the synergistic activation between in-situ electrogenerated HClO and peracetic acid (PAA)-based reactive species in actual wastewater is discussed. A metal-free graphene-modified graphite felt (graphene/GF) cathode is used for the first time to achieve the electrochemically-mediated activation of PAA. The PAA/Cl- system allowed a near-complete sulfamethoxazole (SMX) degradation (kobs =0.49 min-1) in only 5 min in a model solution, inducing 32.7- and 8.2-fold rise in kobs as compared to single PAA and Cl- systems, respectively. Such enhancement is attributed to the occurrence of 1O2 (25.5 µmol L-1 after 5 min of electrolysis) from the thermodynamically favored reaction between HClO and PAA-based reactive species. The antibiotic degradation in a complex water matrix was further considered. The SMX removal is slightly susceptible to the coexisting natural organic matter, with both the acute cytotoxicity (ACT) and the yield of 12 DBPs decreasing by 29.4 % and 37.3 %, respectively. According to calculations, HClO accumulation and organic Cl-addition reactions are thermodynamically unfavored. This study provides a scenario-oriented paradigm for PAA-based electrochemical treatment technology, being particularly appealing for treating wastewater rich in Cl- ion, which may derive in toxic Cl-DBPs.

Activation of peracetic acid by electrodes using biogenic electrons: A novel energy- and catalyst-free process to eliminate pharmaceuticals.

Peracetic acid (PAA) has received increasing attention as an alternative oxidant for wastewater treatment. However, existing processes for PAA activation to generate reactive species typically require external energy input (e.g., electrically and UV-mediated activation) or catalysts (e.g., Co2+), inevitably increasing treatment costs or introducing potential new contaminants that necessitate additional removal. In this work, we developed a catalyst-free, self-sustaining bioelectrochemical approach within a two-chamber bioelectrochemical system (BES), where a cathode electrode in-situ activates PAA using renewable biogenic electrons generated by anodic exoelectrogens (e.g., Geobacter) degrading biodegradable organic matter (e.g., acetic acid) in wastewater at the anode. This innovative BES-PAA technique achieved 98 % and 81 % removal of 2 µM sulfamethoxazole (SMX) in two hours at pH 2 (cation exchange membrane) and pH 6 (bipolar membrane) using 100 µM PAA without external voltage. Mechanistic studies, including radical quenching, molecular probe validation, electron spin resonance (ESR) experiments, and density functional theory (DFT) calculations, revealed that SMX degradation was driven by reactive species generated via biogenic electron-mediated OO cleavage of PAA, with CH3C(O)OO• contributing 68.1 %, •OH of 18.4 %, and CH3C(O)O• of 9.4 %, where initial formation of •OH and CH3C(O)O• rapidly reacts with PAA to produce CH3C(O)OO•. The presence of common water constituents such as anions (e.g., Cl-, NO3-, and H2PO4-) and humic acid (HA) significantly hinders SMX removal via the BES-PAA technique, whereas CO32- and HCO3- ions have a comparatively minor impact. Additionally, the study investigated the removal of various pharmaceuticals present in secondary treated municipal wastewater, attributing differences in removal efficiency to the selective action of CH3C(O)OO•. This research demonstrates a novel PAA activation method that is ecologically benign, inexpensive, and capable of overcoming catalyst deactivation and secondary pollution issues.

Antibacterial Activity of Brass against Antibiotic-Resistant Bacteria following Repeated Exposure to Hydrogen Peroxide/Peracetic Acid and Quaternary Ammonium Compounds.

Copper-containing materials are attracting attention as self-disinfecting surfaces, suitable for helping healthcare settings in reducing healthcare-associated infections. However, the impact of repeated exposure to disinfectants frequently used in biocleaning protocols on their antibacterial activity remains insufficiently characterized. This study aimed at evaluating the antibacterial efficiency of copper (positive control), a brass alloy (AB+®) and stainless steel (negative control) after repeated exposure to a quaternary ammonium compound and/or a mix of peracetic acid/hydrogen peroxide routinely used in healthcare settings. A panel of six antibiotic-resistant strains (clinical isolates) was selected for this assessment. After a short (5 min) exposure time, the copper and brass materials retained significantly better antibacterial efficiencies than stainless steel, regardless of the bacterial strain or disinfectant treatment considered. Moreover, post treatment with both disinfectant products, copper-containing materials still reached similar levels of antibacterial efficiency to those obtained before treatment. Antibiotic resistance mechanisms such as efflux pump overexpression did not impair the antibacterial efficiency of copper-containing materials, nor did the presence of one or several genes related to copper homeostasis/resistance. In light of these results, surfaces made out of copper and brass remain interesting tools in the fight against the dissemination of antibiotic-resistant strains that might cause healthcare-associated infections.

Insights into the pH-dependent mechanism of peracetic acid activation by biochar-supported zero-valent iron/cobalt bimetallic nanoparticles: The shift of reactive sites and the dual role of hydrogen peroxide.

The peracetic acid (PAA)-based water purification process is often controlled by the solution pH. Herein, we explored the usage of biochar (BC) supported zero-valent iron/cobalt nanoparticles (Fe/Co@BC) for triggering PAA oxidation of sulfamethazine (SMT), and discovered the PAA activation mechanisms at different pHs. Fe/Co@BC exhibited extraordinary PAA activation efficiency over the pH range of 3.0-8.2, effectively broadening the working pH of the zero-valent iron nanoparticles (NZVI)-PAA process. Specifically, the SMT removal efficiency increased by 8.3 times in Fe/Co@BC-PAA system compared to the NZVI-PAA system at pH 8.2. Besides, the leaching and recycling experiments indicated the improved stability and reusability of the materials. For the mechanism study, the main reactive species was •OH under acidic conditions and R-O•/Fe(IV) under neutral/alkaline conditions. More interestingly, the reactive sites on Fe/Co@BC shifted from Fe species to Co species as pH increased, and the role of H2O2 in this reaction system also shifted from a radical precursor to a radical scavenger with increasing pH. This study highlights the distinct mechanism of PAA activation by bimetallic composites under different pH conditions and provides a new efficient approach for PAA activation to degrade organic contaminants.

A systematic investigation of peracetic acid oxidation and polymeric coagulants re-flocculation to enhance activated sludge dewatering: Multi-porous skeleton structures.

In this research, the effects of peracetic acid (PAA), polymeric flocculants, and their combined conditioning on improving the dewatering performance were comprehensively evaluated. The results showed that sludge cake moisture content, capillary suction time (CST), and specific resistance to filtration (SRF) were 70.6%, 48.1 s, and 3.42 × 1012 m/kg after adding 0.10 g/gMLSS PAA for 50 min, representing reductions of 12.60%, 40.32%, and 33.98%, respectively. Additionally, conditioning of sludge with polyferric sulfate (PFS), polyaluminum chloride (PAC), and cationic polyacrylamide (CPAM) enhanced sludge properties in the following order: CPAM > PAC > PFS. After the PAA oxidation and re-flocculation process, the optimal dosages of PFS, PAC, and CPAM were reduced to 1.5 g/L, 0.9 g/L, and 0.04 g/L, respectively. The sludge dewatering performance significantly improved, with sludge cake moisture content measuring 65.8%, 66.3%, and 61.7%, respectively. Moreover, the spatial multi-porous skeleton structures were formed via re-flocculation to improve the sludge dewatering. Furthermore, economic evaluation validated that the pre-oxidation and re-flocculation process could be considered an economically viable option. These research findings could serve as a valuable reference for practical engineering applications.

Revisiting the synergistic oxidation of peracetic acid and permanganate(â ¦) towards micropollutants: The enhanced electron transfer mechanism of reactive manganese species.

Synergistic actions of peroxides and high-valent metals have garnered increasing attentions in wastewater treatment. However, how peroxides interact with the reactive metal species to enhance the reactivity remains unclear. Herein, we report the synergistic oxidation of peracetic acid (PAA) and permanganate(Ⅶ) towards micropollutants, and revisit the underlying mechanism. The PAA-Mn(VII) system showed remarkable efficiency with a 28-fold enhancement on sulfamethoxazole (SMX) degradation compared to Mn(Ⅶ) alone. Extensive quenching experiments and electron spin resonance (ESR) analysis revealed the generation of unexpected Mn(V) and Mn(VI) beyond Mn(III) in the PAA-Mn(VII) system. The utilization efficiency of Mn intermediates was quantified using 2,2'-azino-bis(3-ethylbenzothiazoline)-6-sulfonate (ABTS), and the results indicated that PAA could enhance the electron transfer efficiency of reactive manganese (Mn) species, thus accelerating the micropollutant degradation. Density functional theory (DFT) calculations showed that Mn intermediates could coordinate to the O1 of PAA with a low energy gap, enhancing the oxidation capacity and stability of Mn intermediates. A kinetic model based on first principles was established to simulate the time-dependent concentration profiles of the PAA-Mn complexes and quantify the contributions of the PAA-Mn(III) complex (50.8 to 59.3 %) and the PAA-Mn(Ⅴ/Ⅵ) complex (40.7 to 49.2 %). The PAA-Mn(VII) system was resistant to the interference from complex matrix components (e.g., chloride and humic acid), leading to the high efficiency in real wastewater. This work provides new insights into the interaction of PAA with reactive manganese species for accelerated oxidation of micropollutants, facilitating its application in wastewater treatment.

Peracetic acid treatment of squid eggs infected with parasitic copepod (Ikanecator primus gen. et sp. nov.).

Having been successfully bred in semi-intensive and intensive aquaculture systems, oval squids of the Sepioteuthis lessoniana species complex are emerging as promising candidates for research and industry. Nevertheless, information about pathogens and diseases that may affect squid aquaculture remains sparse. In this study, we identify new parasitic copepod species that causes squid mortality and decreases squid hatching rates, and we also offer a solution to eliminate the pathogen during incubation of squid eggs. The newly discovered copepod Ikanecator primus gen. et sp. nov. was identified on oval squid eggs for the first time using both morphological and molecular diagnostic markers. In the genomes of the copepod and associated microbiome, we identified multiple genes for enzymes involved in cephalopod eggshell degradation in genomes of the copepod and associated microbiome. Furthermore, we conducted experiments to assess efficacy of peracetic acid in inhibiting the I. primus gen. et sp. nov. both in vitro and in vivo using immersion treatment. We established that a 2-min exposure to a concentration of 250 µl/L of peracetic acid containing product (PAA-product; 35 mg/L PAA and 15 mg/L H2O2) inhibited the development of nauplii in vitro. All parasites exposed to a concentration of 500 µl/L of PAA-product (70 mg/L PAA and 30 mg/L H2O2) were eliminated within two minutes. On top of this, the immersion treatment with 500 µl/L of PAA-product (70 mg/L PAA and 30 mg/L H2O2) improved survival of squid embryos and increased size of squid hatchlings compared with control and the immersion treatment with 125 µl/L of PAA-product (17.5 mg/L PAA and 7.5 mg/L H2O2) and the immersion treatment with 250 µl/L of PAA-product (35 mg/L PAA and 15 mg/L H2O2). These findings suggest that PAA holds a great potential as inhibitor and controller of parasitic copepod infections and for overall health management in cephalopod culture.

Effects of prolonged application of peracetic acid-based disinfectant on recirculating aquaculture systems stocked with Atlantic salmon parr.

The use of recirculating aquaculture systems (RAS) for Atlantic salmon (Salmo salar) production has become increasingly common. RAS water disinfection plays a crucial role on its biosecurity. Peracetic acid (PAA) is a promising disinfectant due to its powerful oxidative properties, broad antimicrobial spectrum, and rapid degradation into no harmful compounds. This study focused on assessing the consequences of prolonged application of a PAA-based disinfectant in a RAS stocked with salmon parr. The experiment included three treatment groups in triplicate: 0 mg/L PAA (control), 0.1 mg/L PAA, and 1 mg/L PAA, using nine-replicated RAS with a total of 360 fish (14.8 ± 2.3 g; N = 40/RAS). The study spanned 28 days, with samples collected on days 0, 14, and 28. The analyzed parameters were water quality, and fish parameters, including external welfare indicators, gill histology, total antioxidant capacity (TAC), reactive oxygen species/reactive nitrogen species (ROC/RNC), oxidative stress biomarkers related to DNA and protein, cellular DNA damage, and global gene expression. While water quality remained relatively stable, there was an increase in bacterial populations in the groups exposed to PAA, particularly 1 mg/L PAA. Fish weight did not differ between the control and PAA-exposed groups. TAC, ROC/RNC, and oxidative stress biomarkers exhibited similar trends. The study identified >400 differentially expressed genes (DEGs) in the skin, gill, and olfactory organ, with many of these DEGs associated with immune responses. Comparing the transcriptomic profiles of the three tissue organs revealed that the olfactory organ was the most reactive to PAA treatment. This study shows that calculated PAA concentrations of 0.1 mg/L and 1 mg/L in the pump-sump, contributed to an increase of bacteria whereas no detectable differences in health and welfare of salmon parr were found. These findings are promising for the implementation of PAA-based disinfectants in RAS stoked with Atlantic salmon parr.