RESUMO
Mixed community microalgal wastewater treatment technologies have the potential to advance the limits of technology for biological nutrient recovery while producing a renewable carbon feedstock, but a deeper understanding of their performance is required for system optimization and control. In this study, we characterized the performance of a 568 m3·day-1 Clearas EcoRecover system for tertiary phosphorus removal (and recovery as biomass) at an operating water resource recovery facility (WRRF). The process consists of a (dark) mix tank, photobioreactors (PBRs), and a membrane tank with ultrafiltration membranes for the separation of hydraulic and solids residence times. Through continuous online monitoring, long-term on-site monitoring, and on-site batch experiments, we demonstrate (i) the importance of carbohydrate storage in PBRs to support phosphorus uptake under dark conditions in the mix tank and (ii) the potential for polyphosphate accumulation in the mixed algal communities. Over a 3-month winter period with limited outside influences (e.g., no major upstream process changes), the effluent total phosphorus (TP) concentration was 0.03 ± 0.03 mg-P·L-1 (0.01 ± 0.02 mg-P·L-1 orthophosphate). Core microbial community taxa included Chlorella spp., Scenedesmus spp., and Monoraphidium spp., and key indicators of stable performance included near-neutral pH, sufficient alkalinity, and a diel rhythm in dissolved oxygen.
Assuntos
Microalgas , Fósforo , Águas Residuárias , Microalgas/metabolismo , Águas Residuárias/química , Eliminação de Resíduos Líquidos/métodos , Biomassa , Purificação da Água/métodosRESUMO
Municipal wastewater treatment plants are mostly based on traditional activated sludge (AS) processes. These systems are characterised by major drawbacks: high energy consumption, large amount of excess sludge and high greenhouse gases emissions. Treatment through microalgal-bacterial consortia (MBC) is an alternative and promising solution thanks to lower energy consumption and emissions, biomass production and water sanitation. Here, microbial difference between a traditional anaerobic sludge (AS) and a consortium-based system (photo-sequencing batch reactor (PSBR)) with the same wastewater inlet were characterised through shotgun metagenomics. Stable nitrification was achieved in the PSBR ensuring ammonium removal > 95 % and significant total nitrogen removal thanks to larger flocs enhancing denitrification. The new system showed enhanced pathogen removal, a higher abundance of photosynthetic and denitrifying microorganisms with a reduced emissions potential identifying this novel PSBR as an effective alternative to AS.
Assuntos
Bactérias , Reatores Biológicos , Microalgas , Nitrogênio , Esgotos , Águas Residuárias , Esgotos/microbiologia , Microalgas/metabolismo , Águas Residuárias/microbiologia , Águas Residuárias/química , Reatores Biológicos/microbiologia , Bactérias/metabolismo , Consórcios Microbianos/fisiologia , Purificação da Água/métodos , Desnitrificação , Eliminação de Resíduos Líquidos/métodos , NitrificaçãoRESUMO
The development of algae is seen as a potential and ecologically sound approach to address the increasing demands in multiple sectors. However, successful implementation of processes is highly dependent on effective growing and harvesting methods. The present study provides a complete examination of contemporary techniques employed in the production and harvesting of algae, with a particular emphasis on their sustainability. The review begins by examining several culture strategies, encompassing open ponds, closed photobioreactors, and raceway ponds. The analysis of each method is conducted in a systematic manner, with a particular focus on highlighting their advantages, limitations, and potential for expansion. This approach ensures that the conversation is in line with the objectives of sustainability. Moreover, this study explores essential elements of algae harvesting, including the processes of cell separation, dewatering, and biomass extraction. Traditional methods such as centrifugation, filtration, and sedimentation are examined in conjunction with novel, environmentally concerned strategies including flocculation, electro-coagulation, and membrane filtration. It evaluates the impacts on the environment that are caused by the cultivation process, including the usage of water and land, the use of energy, the production of carbon dioxide, and the runoff of nutrients. Furthermore, this study presents a thorough examination of the current body of research pertaining to Life Cycle Analysis (LCA) studies, presenting a perspective that emphasizes sustainability in the context of algae harvesting systems. In conclusion, the analysis ends up with an examination ahead at potential areas for future study in the cultivation and harvesting of algae. This review is an essential guide for scientists, policymakers, and industry experts associated with the advancement and implementation of algae-based technologies.
Assuntos
Biocombustíveis , Microalgas , Animais , Fotobiorreatores , Biomassa , Estágios do Ciclo de VidaRESUMO
Light energy directly affects microalgae growth and productivity. Microalgae in natural environments receive light through solar fluxes, and their duration and distribution are highly variable over time. Consequently, microalgae must adjust their photosynthetic processes to avoid photo limitation and photoinhibition and maximize yield. Considering these circumstances, adjusting light capture through artificial lighting in the main culture systems benefits microalgae growth and induces the production of commercially important compounds. In this sense, this review provides a comprehensive study of the role of light in microalgae biotechnology. For this, we present the main fundamentals and reactions of metabolism and metabolic alternatives to regulate photosynthetic conversion in microalgae cells. Light conversions based on natural and artificial systems are compared, mainly demonstrating the impact of solar radiation on natural systems and lighting devices, spectral compositions, periodic modulations, and light fluxes when using artificial lighting systems. The most commonly used photobioreactor design and performance are shown herein, in addition to a more detailed discussion of light-dependent approaches in these photobioreactors. In addition, we present the principal advances in photobioreactor projects, focusing on lighting, through a patent-based analysis to map technological trends. Lastly, sustainability and economic issues in commercializing microalgae products were presented.
Assuntos
Microalgas , Patentes como Assunto , Biotecnologia , Meio AmbienteRESUMO
This study explores diverse cultivation modes for Chlorella vulgaris within a biorefinery at pilot scale that produces both biodiesel by transesterification of waste frying oils and syngas by gasification of organic wood waste. Given microalgae's comparatively modest biofuel yield relative to principal biorefinery products, the microalgae cultivation process is designed on the biofuels production rates. Liquid and gaseous waste streams are recycled inside the biorefinery: crude glycerol is mixed with wood to enhance the quality of syngas, wastewater is fed to microalgae so as flue gas. Also, the oil extracted from microalgae contributes to produce biodiesel and the waste cells are gasified. Considering that the optimal fit for each cultivation mode varies with the shape of the reactor, we propose a modular approach to assemble them in batteries of tubular, bubble flow, and airlift reactors, and present an operating design criterion that can fulfill the mass balance of the plant by adding/transforming the number of units inside the different batteries. Methods to adjust the operating conditions and control the operating parameters are also discussed. The designed configurations were operated recycling nominal waste streams of about 30 L d-1 of wastewater and 90 Nm3 h-1 of flue gas. Results confirm that the most advantageous one, in terms of volume per recycled waste streams, is a battery of 16 airlift reactors, operating in mixotrophic mode, with growing rate of 0.427 d-1, yield of 3.06, glycerol conversion 39 %, CO2 removal 64 % of inlet 6-10 %(mol) concentration. The same nominal waste streams can also be managed by 40 tubular reactors in almost heterotrophic conditions coupled with 12 bubble columns in autotrophic conditions; working respectively at growing rates of 0.395 d-1 and 0.362 d-1 and yields of 2.94 and 2.84. The battery of tubular reactors reached a glycerol conversion of 45 % and the array of bubble columns removed about 51 % of inlet 12-20 %(mol) CO2 concentration. A complete comparison is reported also in terms of dimensionless numbers and pumping/mixing requirements.
Assuntos
Chlorella vulgaris , Microalgas , Águas Residuárias , Dióxido de Carbono , Biocombustíveis , Glicerol , Reatores Biológicos , Gases , Biomassa , FotobiorreatoresRESUMO
Membrane photobioreactors (MPBRs) have gained significant attention due to their ability to support microalgae activities such as cultivation, harvesting, and production of beneficial products. Despite various efforts to mitigate membrane fouling, a fundamental issue in membrane processes, in these systems, a cost-effective and less energy-consuming method is still needed. This study examines the impact of the cross-sectional area of the riser and the baffle material on membrane fouling in an internal loop airlift MPBR. The use of hydrophilic polyester-polypropylene (PES-PP) baffles proves to be more effective than plexiglass baffles. Specifically, in configurations with d = 0.7 cm and d = 1.4 cm, RC/RT decreased by approximately 20% and 13%, respectively, compared to plexiglass baffles. As for the values of RP/RT at a distance of d = 0.7, nearly a 5% increase was observed, and at a distance of d = 1.4, an increase of approximately 11% was observed. This is due to the development of the cake layer on the matrix structure of the PES-PP baffles instead of the membrane itself. The most optimal outcomes were reached while working with PES-PP at a distance of 0.7 cm, as it prolonged the membrane fouling time to 46 h.
RESUMO
The light conditions are of utmost importance in any microalgae production process especially involving artificial illumination. This also applies to a chrysolaminarin (soluble 1,3-ß-glucan) production process using the diatom Phaeodactylum tricornutum. Here we examine the influence of the amount of light per gram biomass (specific light availability) and the influence of two different biomass densities (at the same amount of light per gram biomass) on the accumulation of the storage product chrysolaminarin during nitrogen depletion in artificially illuminated flat-panel airlift photobioreactors. Besides chrysolaminarin, other compounds (fucoxanthin, fatty acids used for energy storage [C16 fatty acids], and eicosapentaenoic acid) are regarded as well. Our results show that the time course of C-allocation between chrysolaminarin and fatty acids, serving as storage compounds, is influenced by specific light availability and cell concentration. Furthermore, our findings demonstrate that with increasing specific light availability, the maximal chrysolaminarin content increases. However, this effect is limited. Beyond a certain specific light availability (here: 5 µmolphotons gDW -1 s-1 ) the maximal chrysolaminarin content no longer increases, but the rate of increase becomes faster. Furthermore, the conversion of light to chrysolaminarin is best at the beginning of nitrogen depletion. Additionally, our results show that a high biomass concentration has a negative effect on the maximal chrysolaminarin content, most likely due to the occurring self-shading effects.
Assuntos
Diatomáceas , Fotobiorreatores , Nitrogênio , Ácidos Graxos , Ácido Eicosapentaenoico , BiomassaRESUMO
This work shows the potential of a new way of co-treatment of domestic wastewater (DWW) and a liquid stream coming from the thermal hydrolysis of the organic fraction of municipal solid waste (OFMSW) mediated by a mixed culture of purple phototrophic bacteria (PPB) capable of assimilating carbon and nutrients from the medium. The biological system is an open single-step process operated under microaerophilic conditions at an oxidative reduction potential (ORP) < 0 mV with a photoperiod of 12/24 h and fed during the light stage only so the results can be extrapolated to outdoor open pond operations by monitoring the ORP. The effluent mostly complies with the discharge values of the Spanish legislation in COD and p-values (<125 mg/L; <2 mg/L), respectively, and punctually on values in N (<15 mg/L). Applying an HRT of 3 d and a ratio of 100:7 (COD:N), the presence of PPB in the mixed culture surpassed 50% of 16S rRNA gene copies, removing 78% of COD, 53% of N, and 66% of P. Furthermore, by increasing the HRT to 5 d, removal efficiencies of 83% of COD, 65% of N, and 91% of P were achieved. In addition, the reactors were further operated in a membrane bioreactor, thus separating the HRT from the SRT to increase the specific loading rate. Very satisfactory removal efficiencies were achieved by applying an HRT and SRT of 2.3 and 3 d, respectively: 84% of COD, 49% of N, and 93% of P despite the low presence of PPB due to more oxidative conditions, which step-by-step re-colonized the mixed culture until reaching >20% of 16S rRNA gene copies after 49 d of operation. These results open the door to scaling up the process in open photobioreactors capable of treating urban wastewater and municipal solid waste in a single stage and under microaerophilic conditions by controlling the ORP of the system.
RESUMO
Cyanobacteria are highly interesting microbes with the capacity for oxygenic photosynthesis. They fulfill an important purpose in nature but are also potent biocatalysts. This chapter gives a brief overview of this diverse phylum and shortly addresses the functions these organisms have in the natural ecosystems. Further, it introduces the main topics covered in this volume, which is dealing with the development and application of cyanobacteria as solar cell factories for the production of chemicals including potential fuels. We discuss cyanobacteria as industrial workhorses, present established chassis strains, and give an overview of the current target products. Genetic engineering strategies aiming at the photosynthetic efficiency as well as approaches to optimize carbon fluxes are summarized. Finally, main cultivation strategies are sketched.
Assuntos
Cianobactérias , Engenharia Metabólica , Ecossistema , Fotossíntese/genética , Cianobactérias/genéticaRESUMO
In this study, the cultivation and harvesting of Arthrospira platensis biomass were proposed via simple, safe, and efficient techniques for direct consumption. Cultivation of microalgae in a covered macrobubble column under outdoor conditions resulted in significant differences (p < 0.05) with a maximum dry cell weight (Xm) of 0.959 ± 0.046 g/L. Notably, outdoor cultures resulted in approximately twofold biomass compared to indoor cultures. This outcome shows that the developed outdoor setup integrated with solar panels while utilising Malaysia's weather and atmospheric air as carbon sources is viable. Meanwhile, for harvesting, the screening showed that the fungus isolated from mould soybean cake (tempeh) starter indicated the highest harvesting efficiency, which was then further identified as Rhizopus microsporus, microscopically and molecularly. Overall, the economical and portable setup of outdoor cultivation coupled with safe harvesting via locally isolated fungus from tempeh as a bioflocculant would provide sustainability to produce A. platensis biomass.
Assuntos
Microalgas , Spirulina , Glycine max , Fotobiorreatores , Biomassa , FungosRESUMO
Hydrogen (H2) is a promising fuel in the context of climate neutral energy carriers and photosynthesis-driven H2-production is an interesting option relying mainly on sunlight and water as resources. However, this approach depends on suitable biocatalysts and innovative photobioreactor designs to maximize cell performance and H2 titers. Cyanobacteria were used as biocatalysts in capillary biofilm photobioreactors (CBRs). We show that biofilm formation/stability depend on light and CO2 availabilityH2 production rates correlate with these parameters but differ between Anabaena and Nostoc. We demonstrate that high light and corresponding O2 levels influence biofilm stability in CBR. By adjusting these parameters, biofilm formation/stability could be enhanced, and H2 formation was stable for weeks. Final biocatalyst titers reached up to 100 g l-1 for N. punctiforme atcc 29133 NHM5 and Anabaena sp. pcc 7120 AMC 414. H2 production rates were up to 300 µmol H2 l-1h-1 and 3 µmol H2 gcdw-1h-1 in biofilms.
Assuntos
Anabaena , Nostoc , Fotossíntese , Fotobiorreatores/microbiologia , HidrogênioRESUMO
This work presents recent developments of algal bioreactors used for CO2 removal and the factors affecting the reactor performance. The main focus of the study is on light intensity and photoperiods. The role of algae in CO2 removal, types of algal species used in bioreactors and conventional types of bioreactors including tubular bioreactor, vertical airlift reactor, bubble column reactor, flat panel or plate reactor, stirred tank reactor and specific type bioreactors such as hollow fibre membrane and disk photobioreactors etc. are discussed in details with respect to utilization of light. The effects of light intensity, light incident, photoinhibition, light provision arrangements and photoperiod on the performance of algal bioreactors for CO2 removal are also discussed. Efficient operation of algal photobioreactors cannot be achieved without the improvement in the utilization of incident light intensity and photoperiods. The readers may find this article has a much broader significance as algae is not only limited to removal or sequestration of CO2 but also it is used in a number of commercial applications including in energy (biofuel), nutritional and food sectors.
RESUMO
This work evaluated the performance of real rare earth elements (REEs) wastewater purification and carbon dioxide (CO2) fixation by Chlamydomonas sp. YC with pilot-scale airlift-photobioreactors (AL-PBRs), tubular photobioreactors (TB-PBRs) and raceway ponds (ORWPs) under high-temperature outdoor conditions in summer. The obtained results showed that Chlamydomonas sp. YC at 1 g/L oyster shell piece (OSP) and 3 % CO2 had the highest biomass (1.9 g/L) and NH4+-N removal efficiency (34.0 %) during the REEs wastewater treatment. Among the selected photobioreactors, Chlamydomonas sp. YC to treat real REEs wastewater at 3 % CO2 under high-temperature outdoor conditions attained the highest biomass (2.3 g/L) in the TB-PBRs with the best NH4+-N removal efficiency (43.0 %). Furthermore, the input cost and CO2 net sequestration evaluation revealed that TB-PBRs was more economical photobioreactors to treat REEs wastewater and fix CO2 by Chlamydomonas sp. YC, providing some vital scientific details for REEs wastewater and CO2 fixation by microalgal biotechnology.
Assuntos
Chlamydomonas , Microalgas , Purificação da Água , Águas Residuárias , Dióxido de Carbono , Fotobiorreatores , BiomassaRESUMO
Although the handling and exploitation of cyanobacteria is associated with some challenges, these phototrophic bacteria offer great opportunities for innovative biotechnological processes. This chapter covers versatile aspects of working with cyanobacteria, starting with up-to-date in silico and in vitro screening methods for bioactive substances. Subsequently, common conservation techniques and vitality/viability estimation methods are compared and supplemented by own data regarding the non-invasive vitality evaluation via pulse amplitude modulated fluorometry. Moreover, novel findings about the influence the state of the pre-cultures have on main cultures are presented. The following sub-chapters deal with different photobioreactor-designs, with special regard to biofilm photobioreactors, as well as with heterotrophic and mixotrophic cultivation modes. The latter topic provides information from literature on successfully enhanced cyanobacterial production processes, augmented by own data.
Assuntos
Cianobactérias , Biotecnologia , Fotobiorreatores/microbiologiaRESUMO
The worldwide fossil fuel reserves are rapidly and continually being depleted as a result of the rapid increase in global population and rising energy sector needs. Fossil fuels should not be used carelessly since they produce greenhouse gases, air pollution, and global warming, which leads to ecological imbalance and health risks. The study aims to discuss the alternative renewable energy source that is necessary to meet the needs of the global energy industry in the future. Both microalgae and macroalgae have great potential for several industrial applications. Algae-based biofuels can surmount the inadequacies presented by conventional fuels, thereby reducing the 'food versus fuel' debate. Cultivation of algae can be performed in all three systems; closed, open, and hybrid frameworks from which algal biomass is harvested, treated and converted into the desired biofuels. Among these, closed photobioreactors are considered the most efficient system for the cultivation of algae. Different types of closed systems can be employed for the cultivation of algae such as stirred tank photobioreactor, flat panel photobioreactor, vertical column photobioreactor, bubble column photobioreactor, and horizontal tubular photobioreactor. The type of cultivation system along with various factors, such as light, temperature, nutrients, carbon dioxide, and pH affect the yield of algal biomass and hence the biofuel production. Algae-based biofuels present numerous benefits in terms of economic growth. Developing a biofuel industry based on algal cultivation can provide us with a lot of socio-economic advantages contributing to a publicly maintainable result. This article outlines the third-generation biofuels, how they are cultivated in different systems, different influencing factors, and the technologies for the conversion of biomass. The benefits provided by these new generation biofuels are also discussed. The development of algae-based biofuel would not only change environmental pollution control but also benefit producers' economic and social advancement.
Assuntos
Biocombustíveis , Microalgas , Biomassa , Fotobiorreatores , AlimentosRESUMO
Different high temperatures adversely affect crop and algal yields with various responses in photosynthetic cells. The list of genes required for thermotolerance remains elusive. Additionally, it is unclear how carbon source availability affects heat responses in plants and algae. We utilized the insertional, indexed, genome-saturating mutant library of the unicellular, eukaryotic green alga Chlamydomonas reinhardtii to perform genome-wide, quantitative, pooled screens under moderate (35°C) or acute (40°C) high temperatures with or without organic carbon sources. We identified heat-sensitive mutants based on quantitative growth rates and identified putative heat tolerance genes (HTGs). By triangulating HTGs with heat-induced transcripts or proteins in wildtype cultures and MapMan functional annotations, we presented a high/medium-confidence list of 933 Chlamydomonas genes with putative roles in heat tolerance. Triangulated HTGs include those with known thermotolerance roles and novel genes with little or no functional annotation. About 50% of these high-confidence HTGs in Chlamydomonas have orthologs in green lineage organisms, including crop species. Arabidopsis thaliana mutants deficient in the ortholog of a high-confidence Chlamydomonas HTG were also heat sensitive. This work expands our knowledge of heat responses in photosynthetic cells and provides engineering targets to improve thermotolerance in algae and crops.
Assuntos
Chlamydomonas reinhardtii , Chlamydomonas , Termotolerância , Chlamydomonas reinhardtii/metabolismo , Termotolerância/genética , Fotossíntese/genética , Carbono/metabolismoRESUMO
Implementation of outdoor photobioreactors has been challenged by an extremely oversaturated daily peak of solar irradiance. This study aims to understand the role of column size and paranet shading as well as to investigate the most convenient light control in outdoor cyanobacterial culture. The photobioreactor (PBR) consisted of plastic columns with a diameter of 12.74 cm (PBRd-20) and 31.85 cm (PBRd-50) laid outdoors and inclined at 158.22° upwards against solar radiation, while paranet shading was provided at 0%, 50%, 70%, and 90% shading capacity. A semi-continuous culture of cyanobacterium Arthrospira (Spirulina) platensis was conducted for 6 weeks with weekly monitoring of the growth parameter as well as the proximate and pigments content, while the daily irradiance and culture maximum temperature were recorded. The result shows that the column diameter of 12.74 cm had a lethal risk of 44.7% and this decreased to 10.5% by widening the column diameter to 31.85 cm. This lethal risk can be eliminated by the application of a paranet at a 50% reduction level for the column diameter of 31.85 cm and a 70% reduction level for the column diameter of 12.74 cm. The highest culture productivity of 149.03 mg/(L·day) was achieved with a PBRd-20 with 50% shading treatment, but a PBRd-50 with 90% shading treatment led to an increase in the protein and phycocyanin content by 66.7% and 14.91%, respectively.
RESUMO
Due to their versatility and the high biomass yield produced, cultivation of phototrophic organisms is an increasingly important field. In general, open ponds are chosen to do it because of economic reasons; however, this strategy has several drawbacks such as poor control of culture conditions and a considerable risk of contamination. On the other hand, photobioreactors are an attractive choice to perform cultivation of phototrophic organisms, many times in a large scale and an efficient way. Furthermore, photobioreactors are being increasingly used in bioprocesses to obtain valuable chemical products. In this review, we briefly describe different photobioreactor set-ups, including some of the recent designs, and their characteristics. Additionally, we discuss the current challenges and advantages that each different type of photobioreactor presents, their applicability in biocatalysis and some modern modeling tools that can be applied to further enhance a certain process.
RESUMO
Contaminants from cooling water waste (CWW) generated by industries represent an environmental hazard if discharged into aquatic bodies and soil without treatment. Most treatment strategies are energy-demanding and costly; hence, low-cost and sustainable treatment alternative technologies are needed. The present study proposed cyanobacteria culture as a low-cost biological method to treat cooling water waste (CWW) while simultaneously producing carbohydrates. For this purpose, CWW from a cooling tower was evaluated in different dilutions with domestic wastewater (DW) (DW25% -CWW75%, DW50% -CWW50%, DW25% -CWW75%, DW100%, and CWW100%) (v/v). The CWW provided a high content of inorganic carbon and low content of N and P, which resulted in a high C/N ratio promoting a fast carbohydrate accumulation but low biomass production. In contrast, cultures with higher DW concentrations achieved similar results in 14 days. The best results were obtained with DW25% -CWW75%, achieving up to 52 ± 18% carbohydrate content on day 8, with the highest biomass concentration of 1.7 ± 0.12â g L-1 on day 14. This culture removed >94% of TAN, N-NO3- and P-PO43-, and 84 ± 10.82% of COD. This strategy could be a promising approach to treating CWW and DW from the same industry and producing value-added products and bioenergy.
RESUMO
Spirulina algae (Spirulina platensis) cultivated in geothermally powered photobioreactors is here proposed as a potentially resource efficient, zero-carbon, and nutritious alternative to conventional beef meat. Employing a standard life cycle assessment, environmental impacts of large-scale Spirulina production in this facility are calculated. The production facility is sited in Orka náttúrunnar (ON Power) Geothermal Park, Iceland, and benefits from resource streams accessible through Hellisheiði (Hellisheidi) power station, including renewable electricity for illumination and power usage, hot and cold water streams for thermal management, freshwater for cultivation, and CO2 for biofixation. During cultivation, GHG-intensive ammonia-based fertilizers are replaced with macronutrients sourced from natural open mines. LCA results show that production of 1 kg of wet edible biomass in this facility requires 0.0378 m2 non-arable land, 8.36 m3 fresh water and is carbon neutral with - 0.008 CO2-eq GHG emissions (net zero). Compared with conventionally produced meat from beef cattle, Spirulina algae cultured in the ON Power Geothermal Park, referred to in this study as GeoSpirulina, requires less than 1% land and water and emits less than 1% GHGs. Considering food and nutritional security concerns, cultivation in a controlled environment agriculture system assures consistent nutritional profile year-round. Moreover, GeoSpirulina biomass assessed in this study contains all essential amino acids as well as essential vitamins and minerals. While keeping a balanced nutrition, for every kg beef meat replaced with one kg GeoSpirulina, the average consumer can save ~ 100 kg CO2-eq GHGs. It is concluded that environmental impacts of GeoSpirulina production in the Hellisheidi facility are considerably lower than those of conventionally produced ruminants.