RESUMO
Introduction: Overactive bladder (OAB) is a highly prevalent condition with limited treatment options due to poor efficacy, side effects, and patient compliance. Novel drug delivery systems that can target the bladder wall may improve OAB therapy. Methods: We explored a polydopamine (PDA)-coated lactobacillus platform as a potential carrier for localized OAB treatment. Urinary microbiome profiling was performed to identify the presence of lactobacillus in healthy and OAB groups. Lactobacillus-PDA nanoparticles were synthesized and characterized by electron microscopy and spectrophotometry. A rat bladder perfusion model and human bladder smooth muscle cell spheroids were used to assess the distribution and penetration of the nanoparticles. The efficacy of the Lactobacillus-PDA system (LPS) for delivering the antimuscarinic drug solifenacin was evaluated in an OAB rat model. Results: Urinary microbiome profiling revealed lactobacillus as a dominant genus in both healthy and OAB groups. The synthesized Lactobacillus-PDA nanoparticles exhibited uniform size and optical properties. In the rat bladder perfusion model, the nanoparticles distributed throughout the bladder wall and smooth muscle without toxicity. The nanoparticles also penetrated human bladder smooth muscle cell spheroids. In the OAB rat model, LPS facilitated the delivery of solifenacin and improved treatment efficacy. Discussion: The results highlight LPS as a promising drug carrier for targeted OAB therapy via penetration into bladder tissues. This bacteriotherapy approach may overcome limitations of current systemic OAB medications. Lactobacillus, a probiotic bacterium present in the urinary tract microbiome, was hypothesized to adhere to and penetrate the bladder wall when coated with PDA nanoparticles, making it a suitable candidate for localized drug delivery.
Assuntos
Indóis , Lactobacillus , Microbiota , Polímeros , Bexiga Urinária Hiperativa , Bexiga Urinária , Animais , Indóis/química , Indóis/farmacocinética , Bexiga Urinária Hiperativa/terapia , Bexiga Urinária Hiperativa/tratamento farmacológico , Humanos , Polímeros/química , Microbiota/efeitos dos fármacos , Ratos , Esferoides Celulares , Succinato de Solifenacina/farmacocinética , Succinato de Solifenacina/química , Succinato de Solifenacina/administração & dosagem , Modelos Animais de Doenças , Ratos Sprague-Dawley , Nanopartículas/química , Sistemas de Liberação de Medicamentos/métodos , Feminino , Miócitos de Músculo Liso/efeitos dos fármacos , Antagonistas Muscarínicos/farmacocinética , Antagonistas Muscarínicos/farmacologia , Antagonistas Muscarínicos/química , Antagonistas Muscarínicos/administração & dosagem , Portadores de Fármacos/químicaRESUMO
Surface display of functional groups with specific reactivity around living cells is an emerging, low cost and highly eco-compatible technology that serves multiple applications, ranging from basic biochemical studies to biomedicine, therapeutics and environmental sciences. Conversely to classical methods exploiting hazardous organic synthesis of precursors or monovalent functionalization via genetics, here we perform functional decoration of individual living microalgae using suitable biocoatings based on polydopamine, a melanin-like synthetic polymer. Here we demonstrate the one-pot synthesis of a functional polydopamine bearing phenylboronic units which can decorate the living cell surfaces via a direct ester formation between boronic units and surface glycoproteins. Furthermore, biosorption of fluorescent sugars on functionalized cell membranes is triggered, demonstrating that these organic coatings act as biocompatible soft shells, still functional and reactive after cell engineering.
Assuntos
Ácidos Borônicos , Indóis , Melaninas , Polímeros , Polímeros/química , Melaninas/química , Melaninas/metabolismo , Indóis/química , Ácidos Borônicos/química , Microalgas/metabolismo , Microalgas/químicaRESUMO
Food contaminated by pathogenic bacteria poses a serious threat to human health. Consequently, we used Salmonella as a model and developed an electrochemical immunosensor based on a polydopamine/CoFe-MOFs@Nafion nanocomposite for the detection of Salmonella in milk. The CoFe-MOFs exhibit good stability, large specific surface area, and high porosity. However, after modification on the electrode surface, they were prone to detachment. This issue was effectively mitigated by incorporating Nafion into the nanocomposite. A polydopamine (PDA) film was deposited onto the surface of CoFe-MOFs@Nafion through cyclic voltammetry (CV), accompanied by an investigation into the polymerization mechanism of the PDA film. PDA contains a substantial number of quinone functional groups, which can covalently bind to amino or sulfhydryl groups via Michael addition reaction or Schiff base reaction, thereby immobilizing anti-Salmonella antibodies onto the modified electrode surface. Under the optimal experimental conditions, the Salmonella concentration exhibited a good linear relationship within the range of 1.38 × 102 to 1.38 × 108 CFU mL-1, with a detection limit of 1.38 × 102 CFU mL-1. Furthermore, the constructed immunosensor demonstrated good specificity, stability, and reproducibility, offering a novel approach for the rapid detection of foodborne pathogens.
RESUMO
Biocatalytic membranes have great potential in various industrial sectors, with the immobilization of enzymes being a crucial stage. Immobilizing enzymes through covalent bonds is a complex and time-consuming process for large-scale applications. Polydopamine (PDA) offers a more sustainable and eco-friendly alternative for enzyme immobilization. Therefore, surface modification with polydopamine as mussel-inspired antifouling coatings has increased resistance to fouling. In this study, α-amylase enzyme was covalently bound to a bioactive PDA-coated polyethersulfone (PES) membrane surface using cyanuric chloride as a linker. The optimal activity of α-amylase enzyme immobilized on PES/PDA membrane was obtained at temperature and pH of 55°C and 6.5, respectively. The immobilized enzyme can be reused up to five reaction cycles with 55% retention of initial activity. Besides, it maintained 60% of its activity after being stored for five weeks at 4°C. Additionally, the immobilized enzyme demonstrated increased Michaelis constant and maximum velocity values during starch hydrolysis. The results of the biofouling experiment of various membranes in a dead-end cell demonstrated that the PES membrane's water flux increased from 6722.7 Lmh to 7560.2 Lmh after PDA modification. Although α-amylase immobilization reduced the flux to 7458.5 Lmh due to enhanced hydrophilicity, compared to unmodified membrane. The findings of this study demonstrated that the membrane produced through co-deposition exhibited superior hydrophilicity, enhanced coating stability, and strong antifouling properties, positioning it as a promising candidate for industrial applications.
RESUMO
The lack of antibacterial activity and the leaching of Ni ions seriously limit the potential applications of the near equiatomic nickel-titanium (NiTi) alloy in the biomedical field. In this study, a silver nanoparticles (Ag NPs) wrapped in a polydopamine (Ag@PDA) film modified NiTi alloy with controllable antibacterial activity and enhanced corrosion resistance was achieved using a one-pot approach in a mixed solution of AgNO3 and dopamine. The controllable antibacterial activity could be achieved by adjusting the initial concentration of dopamine (Cdop), which obtained Ag@PDA films with varying thickness of polydopamine layers coated on Ag NPs, thereby conferring different levels of antibacterial activity to the modified NiTi alloy. In vitro antibacterial ratios (24 h) of Ag@PDA film-modified NiTi alloy against E.coli and S.aureus ranged from 46 % to 100 % and from 42 % to 100 %, respectively. The release curves of Ag ions indicated the persistent antibacterial effect of Ag@PDA film-modified NiTi alloy for at least 21 days. Moreover, in vitro cytotoxicity and in vivo implantation tests demonstrated the satisfactory biosafety of the Ag@PDA film-modified NiTi alloy when used as bioimplants. This research offers valuable insight into meeting various antibacterial demands for NiTi alloy implantations and highlights the potential of Ag-containing film-modified biomaterials in addressing different types of infections induced by implantations.
RESUMO
Solar energy, as a clean and renewable energy source, holds significant promise for addressing water shortages. Utilizing solar energy for water evaporation is seen as an effective solution in this regard. While many existing interfacial photothermal water evaporation systems rely on nanoparticles or graphene as photothermal or support materials, this study introduced polydopamine (PDA) as a photothermal material due to its environmental friendliness and excellent photon absorption characteristics that closely match the solar spectrum. Polystyrene (PS) was also introduced as a support material for its porous structure and density similar to water, enabling it to float on water. The resulting PS-PDA composite porous structure solar evaporator exhibited a photothermal conversion efficiency comparable to nanoparticles (over 75%), yet with lower production costs and minimal environmental impact. This innovative approach offers a scalable solution for water-scarce regions, providing a cost-effective and efficient means to address water scarcity. The use of PDA and PS in this context highlights the potential for utilizing common materials in novel ways to meet pressing environmental challenges.
RESUMO
Living organisms have developed a miraculous biomineralization strategy to form multistage organic-inorganic composites through the orderly assembly of hard/soft substances, achieving mechanical enhancement of materials from the nanoscale to the macroscale. Inspired by biominerals, this study used polydopamine (PDA) coating as a template to induce the growth of hydroxyapatite (HAP) on the surface of carbon fibers (CFs) for enhancing the interfacial properties of the CF/epoxy resin composites. This polydopamine-assisted hydroxyapatite formation (pHAF) biomimetic mineralization strategy constructs soft/hard ordered structure on the CF surface, which not only improves the chemical reaction activity of the CFs but also increases the fiber surface roughness. This, in turn, enhances the interaction and loading delivery among the fibers and the matrix. Compared to the untreated carbon fiber/epoxy resin (CF/EP) composites, the prepared composites showed a substantial enhancement in interlaminar shear strength (ILSS), flexural strength, and interfacial shear strength (IFSS), with improvements of 45.2 %, 46.9 %, and 60.5 %, respectively. This can be attributed to the HAP nanolayers increasing the adhesion and mechanical interlocking with the CFs to the matrix. This study provides an interface modification method of biomimetic mineralization for the preparation of high strength CF composites.
RESUMO
Meticulously engineered nanomaterials achieve significant advances in the diagnosis and therapy of solid tumors by improving tumor delivery efficiency; and thereby, enhancing imaging and therapeutic efficacy. Currently, polydopamine (PDA) attracts widespread attention because of its biocompatibility, simplicity of preparation, abundant surface groups, and high photothermal conversion efficiency, which can be applied in drug delivery, photothermal therapy, theranostics, and other nanomedicine fields. Inspired by PDA structures that are rich in catechol and amino functional groups that can coordinate with various metal ions, which have charming qualities and characteristics, metal-coordinated PDA structures are exploited for tumor theranostics, but are not thoroughly summarized. Herein, this review summarizes the recent progress in the fabrication of metal-coordinated PDA structures and their availabilities in tumor imaging and therapy, with further in-depth discussion of the challenges and future perspectives of metal-coordinated PDA structures, with the aim that this systematic review can promote interdisciplinary intersections and provide inspiration for the further growth and clinical translation of PDA materials.
RESUMO
Head and neck squamous cell carcinoma (HNSCC) is the sixth most common malignant tumor worldwide. Considering its special anatomical site and the progressive resistance to chemotherapy drugs, the development of more effective, minimally invasive and precise treatment methods is urgently needed. Nanomaterials, given their special properties, can be used as drug carrier systems to improve the therapeutic effect and reduce the adverse effects. The drug carrier systems with photothermal effect can promote the killing of cancer cells and help overcome drug resistance through heat stress. We selected dopamine, a simple raw material, and designed and synthesized three different configurations of nano-polydopamine (nPDA) nanomaterials, including nPDA balls, nPDA plates and porous nPDA balls. In addition to the self-polymerization and self-assembly, nPDA has high photothermal conversion efficiency and can be easily modified. Moreover, we loaded cisplatin into three different configurations of nPDA, creating nPDA-cis (the nano-drug carrier system with cisplatin), and comparatively studied the properties and antitumor effects of all the nPDA and nPDA-cis materials in vitro and nPDA-cis in vivo. We found that the photothermal effect of the nPDA-cis balls drug carrier system had synergistic effect with cisplatin, resulting in excellent antitumor effect and good clinical application prospects. The comparison of the three different configurations of drug carrier systems suggested the importance of optimizing the spatial configuration design and examining the physical and chemical properties in the future development of nano-drug carrier systems. In this study, we also noted the duality and complexity of the influences of heat stress on tumors in vitro and in vivo. The specific mechanisms and the synergy with chemotherapy and immunotherapy will be an important research direction in the future.
RESUMO
Preserving vital pulp in cases of dental pulpitis is desired but remains challenging. Previous research has shown that bioactive glass (BG) possesses notable capabilities for odontogenic differentiation. However, the immunoregulatory potential of BG for inflamed pulp is still controversial, which is essential for preserving vital pulp in the context of pulpitis. This study introduces a novel approach utilizing polydopamine-coated BG (BG-PDA) which demonstrates the ability to alleviate inflammation and promote odontogenesis for vital pulp therapy. In vitro, BG-PDA has the potential to induce M2 polarization of macrophages, resulting in decreased intracellular reactive oxygen species levels, inhibition of pro-inflammatory factor, and enhancement of anti-inflammatory factor expression. Furthermore, BG-PDA can strengthen the mitochondrial function in macrophages and facilitate odontogenic differentiation of human dental pulp cells. In a rat model of pulpitis, BG-PDA exhibits the capacity to promote M2 polarization of macrophages, alleviate inflammation, and facilitate dentin bridge formation. This study highlights the notable immunomodulatory and odontogenesis-inducing properties of BG-PDA for treating dental pulpitis, as evidenced by both in vitro and in vivo experiments. These results imply that BG-PDA could serve as a promising biomaterial for vital pulp therapy.
RESUMO
In the intricate landscape of Traumatic Brain Injury (TBI), the management of TBI remains a challenging task due to the extremely complex pathophysiological conditions and excessive release of reactive oxygen species (ROS) at the injury site and the limited regenerative capacities of the central nervous system (CNS). Existing pharmaceutical interventions are limited in their ability to efficiently cross the blood-brain barrier (BBB) and expeditiously target areas of brain inflammation. In response to these challenges herein, we designed novel mussel inspired polydopamine (PDA)-coated mesoporous silica nanoparticles (PDA-AMSNs) with excellent antioxidative ability to deliver a new potential therapeutic GSK-3ß inhibitor lead small molecule abbreviated as Neuro Chemical Modulator (NCM) at the TBI site using a neuroprotective peptide hydrogel (PANAP). PDA-AMSNs loaded with NCM (i.e., PDA-AMSN-D) into the matrix of PANAP were injected into the damaged area in an in vivo cryogenic brain injury model (CBI). This approach is specifically built while keeping the logic AND gate circuit as the primary focus. Where NCM and PDA-AMSNs act as two input signals and neurological functional recovery as a single output. Therapeutically, PDA-AMSN-D significantly decreased infarct volume, enhanced neurogenesis, rejuvenated BBB senescence, and accelerated neurological function recovery in a CBI.
Assuntos
Antioxidantes , Bivalves , Lesões Encefálicas Traumáticas , Indóis , Nanocompostos , Neurogênese , Estresse Oxidativo , Polímeros , Indóis/química , Indóis/farmacologia , Lesões Encefálicas Traumáticas/tratamento farmacológico , Lesões Encefálicas Traumáticas/patologia , Lesões Encefálicas Traumáticas/metabolismo , Polímeros/química , Polímeros/farmacologia , Animais , Estresse Oxidativo/efeitos dos fármacos , Antioxidantes/química , Antioxidantes/farmacologia , Nanocompostos/química , Bivalves/química , Neurogênese/efeitos dos fármacos , Fármacos Neuroprotetores/química , Fármacos Neuroprotetores/farmacologia , Dióxido de Silício/química , Barreira Hematoencefálica/efeitos dos fármacos , Barreira Hematoencefálica/metabolismo , MasculinoRESUMO
Hydrogels, as flexible materials, have been widely used in the field of flexible sensors. Human sweat contains a variety of biomarkers that can reflect the physiological state of the human body. Therefore, it is of great practical significance and application value to realize the detection of sweat composition and combine it with human motion sensing through a hydrogel. Based on mussel-inspired chemistry, polydopamine (PDA) and gold nanoparticles (AuNPs) were coated on the surface of cellulose nanocrystals (CNCs) to obtain CNC-based nanocomposites (CNCs@PDA-Au), which could simultaneously enhance the mechanical, electrochemical, and self-healing properties of hydrogels. The CNCs@PDA-Au was composited with poly(vinyl alcohol) (PVA) hydrogel to obtain the nanocomposite hydrogel (PVA/CNCs@PDA-Au) by freeze-thaw cycles. The PVA/CNCs@PDA-Au has excellent mechanical strength (7.2 MPa) and self-healing properties (88.3%). The motion sensors designed with PVA/CNCs@PDA-Au exhibited a fast response time (122.9 ms), wide strain sensing range (0-600.0%), excellent stability, and fatigue resistance. With the unique electrochemical redox properties of uric acid, the designed hydrogel sensor successfully realized the detection of uric acid in sweat with a wide detection range (1.0-100.0 µmol/L) and low detection limit (0.42 µmol/L). In this study, the dual detection of human motion and uric acid in sweat was successfully realized by the designed PVA/CNCs@PDA-Au nanocomposite hydrogel.
Assuntos
Celulose , Ouro , Hidrogéis , Nanocompostos , Polímeros , Suor , Celulose/química , Nanocompostos/química , Humanos , Hidrogéis/química , Ouro/química , Suor/química , Polímeros/química , Nanopartículas Metálicas/química , Álcool de Polivinil/química , Nanopartículas/química , Indóis/química , Técnicas Biossensoriais/métodos , Técnicas Eletroquímicas/métodos , Limite de Detecção , Movimento (Física)RESUMO
Powder dusting method is the most widely used approach due to its low cost, simplicity, minimal instrument dependence, and extensive applicability for developing latent fingerprints (LFPs). Herein, a novel optical and electrochemical dual-mode method for high-resolution LFP enhancement has been explored based on size-tunable polydopamine (PDA) nanoparticles (NPs) and scanning electrochemical microscopy (SECM). Dark PDAs rich in functional groups and negative charges can combine with the residues of LFPs on various surfaces with high sensitivity and selectivity to realize high-resolution visual fingerprint physical patterns on various porous and nonporous substrates with light color. However, optical visualization is not feasible for LFPs on dark or multicolored surfaces. Fortunately, based on the differences in electrochemical reactivity between ridges and furrows caused by the conductivity and reducibility of PDA powders, SECM can serve as a powerful supplement to optical methods to effectively overcome background color interference and distinctly display fingerprint patterns. Intriguingly, it is noteworthy that the binding amount and particle size of PDA powder significantly affected the optical and electrochemical visualization of LFPs: more powder binding amounts provided darker ridges in optical, and more surface reaction sites (larger powder binding mass at the same particle size or smaller particle size at the same mass) provided higher currents of ridges in electrochemical imaging. It demonstrates that the PDA powder as a dual-mode developer for LFPs offers a promising method for individual identification in forensics.
RESUMO
The removal of dye molecules in alkaline environments is an issue that should receive increased attention. In this study, the interaction mechanism between polydopamine-modified multiwalled carbon nanotubes (P-MWCNTs) and multiwalled carbon nanotubes (MWCNTs) with the cationic dye methylene blue (MB) in alkaline environments was explained in depth by adsorption, spectroscopy, and density functional theory (DFT). The mechanism of action and dominant forces between the adsorbent and adsorbate were analyzed graphically by introducing energy decomposition analysis (EDA) and an independent gradient model (IGM) into the DFT calculations. In addition, the force distribution was investigated through an isosurface. Moreover, batch adsorption studies were conducted to evaluate the performance of MWCNTs and P-MWCNTs for MB removal in alkaline environments. The maximum MB adsorption capacities of the MWCNTs and P-MWCNTs in solution were 113.3 mgâ§g-1 and 230.4 mgâ§g-1, respectively, at pH 9. The IGM and EDA showed that the better adsorption capacity of the P-MWCNTs originated from the enhancement of the electrostatic effect by the proton dissociation of polydopamine. Moreover, the adsorption of MB by MWCNTs and P-MWCNTs in alkaline environments was governed by dispersion and electrostatic effects, respectively. Through this study, it is hoped that progress will be made in the use of DFT to explore the mechanism of adsorbent-adsorbate interactions.
RESUMO
Hydrogels are notable for their outstanding absorbent qualities, satisfactory compatibility with biological systems, ability to degrade, and inherent safety, all of which contribute to their high demand in the field of biomedicine. This study focuses on the fabrication of hydrogels using environmentally friendly cellulosic material. Cellulose hydrogel beads were prepared by physical cross-linking in a NaOH/urea medium. Furthermore, nano polydopamine was integrated into the hydrogel matrix as functional polymers and α-mangostin was employed as an active pharmaceutical ingredient. The physicochemical properties were comprehensively analyzed using Fourier-transform infrared spectrometer, 13C cross-polarization/magic angle spinning nuclear magnetic resonance, thermogravimetric analysis, and scanning electron microscope. The drug delivery properties, including water content, swelling ratio, and drug release profiles, were evaluated. In vitro cytotoxicity against MC3T3-E1 cells was assessed using sulforhodamine B staining. All test hydrogels exhibited inhibitory activity against the growth of MC3T3-E1 cells. These results indicated the potential use of these hydrogels as a drug delivery carrier for α-mangostin in the treatment of ankylosing spondylitis.
RESUMO
The escalating environmental concerns associated with petroleum-based adhesives have spurred an urgent need for sustainable alternatives. Chitosan, a natural polysaccharide, is a promising candidate; however, its limited water resistance hinders broader application. The aim of this study is to develop a new chitosan-based adhesive with improved properties. The polydopamine association with chitosan presents a significant increase in adhesiveness compared to pure chitosan. Polydopamine is synthesized by the enzymatic action of laccase from Trametes versicolor at pH = 4.5, in the absence or presence of chitosan. This pH facilitates chitosan's solubility and the occurrence of catechol in its reduced form (pH < 5.5), thereby increasing the final adhesive properties. To further enhance the adhesive properties, various crosslinking agents were tested. A multi-technique approach was used for the characterization of formulations. The formulation based on 3% chitosan, 50% polydopamine, and 3% xanthan gum showed a spectacular increase in adhesive properties when tested on glass, cardboard and textile. This formulation increased water resistance, maintaining the adhesion of a sample soaked in water for up to 10 h. For cardboard and textile, material rapture occurred, in mechanical tests, prior to adhesive bond failure. Furthermore, all the samples showed antiflame properties, expanding the benefits of their use. Comparison with commercial glues confirms the remarkable adhesive properties of the new formulation.
RESUMO
Open wounds are susceptible to bacterial infections, and antibiotics are commonly used to treat these infections. However, widespread use of antibiotics will easily induce bacterial resistance. Green antibacterial agents serve as excellent alternative for antibiotics in infection therapy. In this work, polydopamine (PDA) was used to modify the surface of ZIF-8, which not only enhances the water stability of Zeolitic imidazolate framework-8(ZIF-8) but also improves its photocatalytic and photothermal capabilities. ZIF-8@PDA was incorporated into carboxylated chitosan (CCS) films as an antibacterial agent, the resulting ZIF-8@PDA-CCS films exhibit excellent ionic/photocatalytic/photothermal antibacterial performance. The film exhibited an impressive 99% in vitro bacterial inhibition rate. After treatment with ZIF-8@PDA-CCS, the bacteria in infected wounds can be completely suppressed. These findings suggest that ZIF-8@PDA-CCS could serve as a potentional antibacterial dressing.
RESUMO
The microreactor with two types of immobilized enzymes, exhibiting excellent orthogonal performance, represents an effective approach to counteract the reduced digestion efficiency resulting from the absence of a single enzyme cleavage site, thereby impacting protein identification. In this study, we developed a hydrophilic dual-enzyme microreactor characterized by rapid mass transfer and superior enzymatic activity. Initially, we selected KIT-6 molecular sieve as the carrier for the dual-IMER due to its three-dimensional network pore structure. Modification involved co-deposition of polyethyleneimine (PEI) and acrylamide (AM) as amine donors, along with dopamine to enhance material hydrophilicity. Remaining amino and double bond functional groups facilitated stepwise immobilization of trypsin and Glu-C. Digestion times for bovine serum albumin (BSA) and bovine hemoglobin (BHb) on the dual-IMER were significantly reduced compared to solution-based digestion (1 min vs. 36 h), resulting in improved sequence coverage (91.30% vs. 82.7% for BSA; 90.24% vs. 89.20% for BHb). Additionally, the dual-IMER demonstrated excellent durability, retaining 96.08% relative activity after 29 reuse cycles. Enhanced protein digestion efficiency can be attributed to several factors: (1) KIT-6's large specific surface area, enabling higher enzyme loading capacity; (2) Its three-dimensional network pore structure, facilitating faster mass transfer and substance diffusion; (3) Orthogonality of trypsin and Glu-C enzyme cleavage sites; (4) The spatial effect introduced by the chain structure of PEI and glutaraldehyde's spacing arm, reducing spatial hindrance and enhancing enzyme-substrate interactions; (5) Mild and stable enzyme immobilization. The KIT-6-based dual-IMER offers a promising technical tool for protein digestion, while the PDA/PEI/AM-KIT-6 platform holds potential for immobilizing other proteins or active substances.
Assuntos
Acrilamida , Dopamina , Enzimas Imobilizadas , Polietilenoimina , Soroalbumina Bovina , Tripsina , Polietilenoimina/química , Dopamina/química , Dopamina/metabolismo , Enzimas Imobilizadas/química , Enzimas Imobilizadas/metabolismo , Acrilamida/química , Tripsina/química , Tripsina/metabolismo , Animais , Bovinos , Soroalbumina Bovina/química , Soroalbumina Bovina/metabolismo , Porosidade , Interações Hidrofóbicas e Hidrofílicas , Hemoglobinas/química , Hemoglobinas/metabolismo , ProteóliseRESUMO
Alginate hydrogels are commonly used in wound care due to their ability to maintain a moist environment, absorb fluids, and aid wound healing. However, their stability and mechanical properties can sometimes limit their effectiveness. This study explores a new approach by creating a dual network system of oxidized alginate and gelatin hydrogel crosslinked with polydopamine in a single step, with the goal of improving the mechanical properties of these hydrogels. The unique aspect of this research is the comprehensive examination of different polydopamine concentrations in dual crosslinking systems. First, alginate was modified with sodium periodate to create additional active groups on its backbone, and various polydopamine concentrations were then tested to assess their impact on the dual crosslinking network and hydrogel properties. The study involved a range of tests, including FTIR, H-NMR, SEM, gelation time, rheology, adhesion, antioxidant activity, swelling ratio, weight loss, drug release, and cell viability. The addition of polydopamine was found to enhance the crosslinking density (0.859 × 109 mol.cm-3). Additionally, the results indicated improvements in properties such as reduced weight loss, enhanced antioxidant and adhesive qualities, and better mechanical properties (2240 kPa). However, the optimal concentration of polydopamine must be determined to achieve the best properties for a wound dressing. Excessive polydopamine can increase the space between polymer chains, leading to a reduction in crosslinking density and storage modulus. Nevertheless, it can also increase the swelling ratio, degradation rate, pore size, porosity, antioxidant activity, and dopamine release. Therefore, identifying the optimal concentration for a functional hydrogel is crucial. Notably, the hydrogel containing 0.5 mg.mL-1 polydopamine exhibited outstanding cell viability (108 % on the third day), swelling capacity (480 %), storage modulus (2240 kPa), gelation time (3 min), antioxidant activity (42.27 %), and skin adherence (11 kPa), making it an optimal choice for advanced wound management. According to the findings, it is emphasized that the application of this particular hydrogel expedites wound healing, as indicated by wound closure and histological studies. ABBREVIATIONS.
RESUMO
To fulfill the requirements of environmental protection, a magnetically recoverable immobilized laccase has been developed for water pollutant treatment. In order to accomplish this objective, we propose a polydopamine-coated magnetic graphene material that addresses the challenges associated with accumulation caused by electrostatic interactions between graphene and enzyme molecules, which can lead to protein denaturation and inactivation. To achieve this, we present a polydopamine-coated magnetic graphene material that binds to the enzyme molecule through flexible spacer arms formed by ionic liquids. The immobilized laccase exhibited a good protective effect on laccase and showed a high stability and recycling ability. Laccase-ILs-PDA-MGO has a wider pH and temperature range and retains about 80% of its initial activity even after incubation at 50 °C for 2 h, which is 2.2 times more active than free laccase. Furthermore, the laccase-ILs-PDA-MGO exhibited a remarkable removal efficiency of 97.0% and 83.9% toward 2,4-DCP and BPA within 12 h at room temperature. More importantly, laccase-ILs-PDA-MGO can be recovered from the effluent and used multiple times for organic pollutant removal, while maintaining a relative removal efficiency of 80.6% for 2,4-DCP and 81.4% for BPA after undergoing seven cycles. In this study, a strategy for laccase immobilization by utilizing ILs spacer arms to modify GO aims to provide valuable insights into the advancement of efficient enzyme immobilization techniques and the practical application of immobilized enzymes in wastewater treatment.