Influencing factors for the development of obstructive sleep apnea after orthognathic surgery in skeletal class III patients: A systematic review.

This systematic review aimed to investigate the factors that may contribute to the development of OSA after orthognathic surgery in patients with skeletal class III. Electronic searches of PubMed, Embase, Web of Science, and Cochrane databases were conducted up to December 10, 2022. In total, 277 studies were retrieved and screened according to the inclusion and exclusion criteria, and 14 were finally selected. All studies were of medium quality (moderate risk of bias). The occurrence of OSA after orthognathic surgery in patients with class III skeletal relationships depends on surgical factors and patient self-factors. Surgical factors include surgery type, amount of maxillary and mandibular movement, and the patient's postoperative swelling. Patient self-factors include weight, age, gender, and hypertrophy of the soft palate, tonsils, and tongue. According to information in the 14 selected articles, the incidences of OSA after Le Fort I impaction and BSSO setback, BSSO setback, and Le Fort I advancement and BSSO setback were 19.2%, 8.57%, and 0.7%, respectively, mostly accompanied with greater amounts of mandibular recession. However, no clear evidence exists to confirm that orthognathic surgery is a causative factor for postoperative sleep breathing disorders in patients with mandibular prognathism. The wider upper airway in patients with class III skeletal might be the reason for the rare occurrence of OSA after surgery. In addition, obesity and advanced age may lead to sleep apnea after orthognathic surgery. Obese patients should be advised to lose weight preoperatively.

Influence of BMI percentile on craniofacial morphology and development in adolescents,Part II: elevated BMI is associated with larger final facial dimensions.

BACKGROUND: Prevalence of adolescent obesity has markedly increased from 5.2% in 1974 to 19.7% in 2021. Understanding the impacts of obesity is important to orthodontists, as growth acceleration and greater pre-pubertal facial dimensions are seen in children with elevated body mass index (BMI). METHODS: To identify whether adolescent obesity shifts the timing and rate of craniofacial growth resulting in larger post-treatment dimensions, we evaluated cephalometric outcomes in overweight/obese (BMI > 85%, n = 168) and normal weight (n = 158) adolescents (N = 326 total). Cephalometric measurements were obtained from pre- and post-treatment records to measure growth rates and final dimensions and were statistically evaluated with repeated measures analysis of variance and linear regression models. RESULTS: Overweight and obese adolescents began and finished treatment with significantly larger, bimaxillary prognathic craniofacial dimensions, with elevated mandibular length [articulare-gnathion (Ar-Gn)], maxillary length [condylion-anterior nasal spine (Co-ANS), posterior nasal spine-ANS (PNS-ANS)], and anterior lower face height (ANS-Me), suggesting overweight children grow more overall. However, there was no difference between weight cohorts in the amount of cephalometric change during treatment, and regression analyses demonstrated no correlation between change in growth during treatment and BMI. BMI percentile was a significant linear predictor (P < 0.05) for cephalometric post-treatment outcomes, including Ar-Gn, Co-ANS, ANS-Me, upper face height percentage (UFH:total FH, inverse relationship), lower face height percentage (LFH:total FH), sella-nasion-A-point (SNA), and SN-B-point (SNB). LIMITATIONS: The study is retrospective. CONCLUSIONS: Growth begins earlier in overweight and obese adolescents and continues at a rate similar to normal-weight children during orthodontic treatment, resulting in larger final skeletal dimensions. Orthodontics could begin earlier in overweight patients to time care with growth, and clinicians can anticipate that overweight/obese patients will finish treatment with proportionally larger, bimaxillary-prognathic craniofacial dimensions.

Skeletal Class III phenotype: Link between animal models and human genetics: A scoping review.

This study aimed to identify evidence from animal studies examining genetic variants underlying maxillomandibular discrepancies resulting in a skeletal Class III (SCIII) malocclusion phenotype. Following the Manual for Evidence Synthesis of the JBI and the PRISMA extension for scoping reviews, a participant, concept, context question was formulated and systematic searches were executed in the PubMed, Scopus, WOS, Scielo, Open Gray, and Mednar databases. Of the 779 identified studies, 13 met the selection criteria and were included in the data extraction. The SCIII malocclusion phenotype was described as mandibular prognathism in the Danio rerio, Dicentrarchus labrax, and Equus africanus asinus models; and as maxillary deficiency in the Felis silvestris catus, Canis familiaris, Salmo trutta, and Mus musculus models. The identified genetic variants highlight the significance of BMP and TGF-ß signaling. Their regulatory pathways and genetic interactions link them to cellular bone regulation events, particularly ossification regulation of postnatal cranial synchondroses. In conclusion, twenty genetic variants associated with the skeletal SCIII malocclusion phenotype were identified in animal models. Their interactions and regulatory pathways corroborate the role of these variants in bone growth, differentiation events, and ossification regulation of postnatal cranial synchondroses.

Efficacy of Clear Aligners in Treating Class III Malocclusion With Mandibular Molar Distalization: A Systematic Review.

The primary goal of orthodontic therapy in pseudo-class III is to restore the proper dental connection by rectifying the canine and molar relationship to Class I through lower molar and premolar visualization, as well as providing normal anterior overjet. The purpose of this systematic study was to determine the efficacy of clear aligners in treating class III malocclusion with mandibular molar distalization. A wide range of searches were done on various search engines like Cochrane, Web of Science, Embase, PubMed, Scopus, and Google Scholar to collect relevant articles related to our study. This review's article selection was guided by the PRISMA flowchart. The electronic findings provided numerous articles with nearly 78 articles regarding clear aligners in class III malocclusion with molar distalization. From this, seven full-text papers were evaluated for eligibility criteria, with two articles being rejected with justification and five articles being elaborated in the current systematic review. The current evidence of this review suggested that the clear aligners were effective in correcting class III malocclusion with molar distalization. The amount of molar distalization is about 2 to 3 mm, which helps in achieving molar and canine relationship in class I, with a high compliance level and also improvement of the facial profile.

Characteristics of Mandibular Arch Forms in Patients with Skeletal Mandibular Prognathism.

Arch forms in orthodontics are considered to affect occlusal stability. This study's subjects were 47 patients (Class III S group) who visited the Chiba Dental Center of Tokyo Dental College and were surgical orthodontic cases, and 60 patients with Class I malocclusion were selected as the control group. A mandibular model of each subject was plotted with each tooth on a digitizer. The clinical bracket points of each tooth were plotted, and intercanine and intermolar measurements were taken. The least squares method was used to fit a quartic equation, and the arch form was drawn. The Class IIIS group was divided by Wits appraisal and facial pattern into a dolichofacial or brachyfacial pattern, and arch forms were compared. The results show that the Class IIIS group had a significantly smaller intermolar width, canine depth, and molar depth and a significantly larger canine W/D ratio. In those with a dolichofacial pattern, the anterior curve of the arch form tended to be flat and the posterior curve narrower. This is because, in skeletal mandibular prognathism, the mandibular anterior shows lingual tipping, and the molars show palatal tipping due to dental compensation, and it was inferred that this tendency was higher in high-angle cases.

Orthodontic-surgical management of severe skeletal class iii malocclusion: A case report.

Skeletal Class III malocclusion possess a difficult challenge to treat for clinicians. They are multifactorial and include genetic and environmental factors. Early intervention of Class III needs orthopedic correction, whereas, in adults, orthodontic camouflage can be done to treat mild cases while severe skeletal discrepancies demand orthognathic surgery along with orthodontic therapy. In this case report, a case of mandibular prognathism with Bilateral Sagittal Split Osteotomy (BSSO) setback was presented.

Dental Occlusion Characteristics for Treatment Decision-Making Regarding Surgery-First Approach in Orthodontics.

The surgery-first approach (SFA) is conducted to decrease the difficulty and duration of orthodontic treatment by correcting the skeletal discrepancy at the initial stage of treatment. However, the indication of the SFA has not been well defined yet. This study explored the dental occlusion characteristics for treatment decision-making regarding the SFA. A total of 200 skeletal Class III patients were consecutively collected and divided into two groups: the orthodontic-first approach (OFA) group and the SFA group. The pretreatment digital dental models and lateral cephalograms were measured. Logistic regression was completed and receiver operating characteristic (ROC) curves were obtained to predict the probability of the SFA. Results showed that the ROC model with L1-MP, upper and lower arch length discrepancy, overbite, and asymmetric tooth number as influencing factors revealed that the sensitivity and specificity for determining SFA were 83.0% and 65.0%, respectively; the accuracy of prediction was 75.0%. In conclusion, our findings indicate that the six measurements from digital dental models and lateral cephalograms can be effectively applied in treatment decision-making for the SFA with satisfactory accuracy.

Skeletal structure of asymmetric mandibular prognathism and retrognathism.

BACKGROUND: This study aimed to compare the skeletal structures between mandibular prognathism and retrognathism among patients with facial asymmetry. RESULTS: Patients who had mandibular asymmetry with retrognathism (Group A) in The Netherlands were compared with those with deviated mandibular prognathism (Group B) in Korea. All the data were obtained from 3D-reformatted cone-beam computed tomography images from each institute. The right and left condylar heads were located more posteriorly, inferiorly, and medially in Group B than in Group A. The deviated side of Group A and the contralateral side of Group B showed similar condylar width and height, ramus-proper height, and ramus height. Interestingly, there were no inter-group differences in the ramus-proper heights. Asymmetric mandibular body length was the most significantly correlated with chin asymmetry in retrognathic asymmetry patients whereas asymmetric elongation of condylar process was the most important factor for chin asymmetry in deviated mandibular prognathism. CONCLUSION: Considering the 3D positional difference of gonion and large individual variations of frontal ramal inclination, significant structural deformation in deviated mandibular prognathism need to be considered in asymmetric prognathism patients. Therefore, Individually planned surgical procedures that also correct the malpositioning of the mandibular ramus are recommended especially in patients with asymmetric prognathism.

Ability to control directional lip-closing force in skeletal class III patients.

BACKGROUND: The relationship between the maximum lip-closing force (LCF) and malocclusion has long been studied. Recently, a method to measure the ability to control directional LCF from eight directions (upper, lower, right, left and the four directions in between) during lip pursing was established. OBJECTIVE: It is considered important to evaluate the ability to control directional LCF. The aim of this study was to investigate the ability of skeletal class III patients to control directional LCF. METHODS: Fifteen skeletal class III patients (mandibular prognathism group) and 15 people with normal occlusion (normal occlusion group) were recruited. The maximum LCF and the accuracy rate (the ratio of the matched time in which the participant was able to keep the LCF in the target range over a total time of 6 s) were measured. RESULTS: The maximum LCF was not significantly different between the mandibular prognathism group and the normal occlusion group. The accuracy rate in the mandibular prognathism group was significantly lower in all six directions than that in the individual normal occlusion group. CONCLUSION: As the accuracy rate in all six directions was significantly lower in the mandibular prognathism group than that in the normal occlusion group, occlusion and craniofacial morphology might influence lip function.

Missense polymorphisms potentially involved in mandibular prognathism.

Objective: The current study aimed to identify and analyze missense single nucleotide polymorphisms (SNPs) that can potentially cause mandibular prognathism. Methods: After reviewing the articles, 56 genes associated with mandibular prognathism were identified and their missense SNPs were retrieved from the NCBI website. Several web-based tools including CADD, PolyPhen-2, PROVEAN, SNAP2, PANTHER, FATHMM, and PON-P2 were used to filter out harmful SNPs. Additionally, ConSurf determined the level of evolutionary conservation at positions where SNPs occur. I-Mutant2 and MUpro predicted the effect of SNPs on protein stability. Furthermore, to investigate the structural and functional changes of proteins, HOPE and LOMETS tools were utilized. Results: Based on predictions in at least four web-based tools, the results indicated that PLXNA2-rs4844658, DUSP6-rs2279574, and FBN3-rs33967815 are harmful. These SNPs are located at positions with variable or average conservation and have the potential to reduce the stability of their respective proteins. Moreover, they may impair protein activity by causing structural and functional changes. Conclusions: In this study, we identified PLXNA2-rs4844658, DUSP6-rs2279574, and FBN3-rs33967815 as potential risk factors for mandibular prognathism using several web-based tools. According to the possible roles of PLXNA2, DUSP6, and FBN3 proteins in ossification pathways, we recommend that these SNPs be investigated further in experimental research. Through such studies, we hope to gain a better understanding of the molecular mechanisms involved in mandible formation.

Long-term evaluation of the upper airway following mandibular setback surgery in the patients with mandibular prognathism.

OBJECTIVE: The aim of this study was to evaluate the changes in the upper airway following mandibular setback surgery. METHODS: The patients underwent mandibular setback surgery and cone-beam computed tomography scan data obtained at four time points: before surgery, immediately after surgery, short- and long-term follow-up. Upper airway geometries were segmented and extracted at each time point. Time-averaged airflow through the upper airway was evaluated at each time point. The measurements of airway volume and minimum cross-sectional areas were obtained at four time points. RESULTS: The airway volume and cross-sectional areas of airway significantly decreased immediately after surgery (p = 0.013 for airway volume and 0.016 for cross-sectional area). At short-term follow-up, the decreased airway volume and cross-sectional areas still showed statistically significant difference to original dimension (p = 0.017 for airway volume and 0.006 for cross-sectional area). At long-term follow-up, although there were no statistical significances (p = 0.859 for airway volume and 0.721 for cross-sectional area), the airway volume and cross-sectional areas had increased slightly compared to those at short-term follow-up. CONCLUSIONS: Although the airflow and dimensional parameters of the upper airway worsened following mandibular setback surgery, there was a tendency to gradually recover during long-term follow-up.

Introducing an esthetic treatment of malocclusion: Ultrasound-assisted augmentation of premaxilla with injectable hyaluronic acid filler.

With advances in the ultrasound-assisted esthetic procedures, filler injection can successfully be used for cosmetic correction of face structural imperfections. Here, we present a new filler injection method by targeting two anatomic landmarks which effectively improved the appearance of a mandibular prognathism case who was a maxillofacial cosmetic surgery candidate.

Swallowing Functions after Sagittal Split Ramus Osteotomy with Loose Fixation for Mandibular Prognathism: A Retrospective Case Series Research.

Sagittal split ramus osteotomy (SSRO) is a standard surgical technique for patients with mandibular prognathism. However, the appropriate position of the proximal fragment is not strictly defined, and rigid fixation can induce early postoperative skeletal relapse and temporomandibular (TMJ) disorders. Loose fixation can be expected to seat the proximal bone fragments in a physiologically appropriate position, thereby reducing adverse events. Although long-term skeletal stability has been achieved using SSRO without fixation, the evaluation of preoperative and postoperative eating and swallowing functions remains unclear, and this study aimed to clarify this point. We evaluated mastication time, oral transfer time, and pharyngeal transfer time using videofluorography (VF) preoperatively, two months postoperatively, and six months postoperatively, and along with the position of anatomical landmarks using cephalometric radiographs, modified water swallowing test (MWST), food test (FT), and repetitive saliva swallowing test (RSST) were used to evaluate postoperative swallowing function. Four patients (one male, three females; mean (range) age 26.5 (18-51) years) were included, with a mean setback of 9.5 mm and 6.5 mm on the right and left sides, respectively. Postoperative eating and swallowing functions were good in VF, cephalometric analysis, MWST, FT, and RSST. In the present study, good results for postoperative eating and swallowing functions were obtained in SSRO with loose fixation of the proximal and distal bone segments.

Orofacial traits related to oral health-related quality of life in Brazilian acromegaly patients.

OBJECTIVE: To investigate orofacial traits and general factors related to oral health-related quality of life in acromegaly patients. MATERIALS AND METHODS: A cross-sectional study with 34 acromegaly patients was conducted. The OHIP-14 questionnaire was used to assess oral health-related quality of life scores. To assess orofacial and occlusion morphology, an oral evaluation was performed. Correlation measures, multiple linear regression and a structural equation model (SEM) were used in the statistical analysis. RESULTS: The presence of arthrosis (SC = 0.467, SE = 0.155, p = 0.003) and smoking history (SC = 0.459, SE = 0.206, p = 0.026) were associated with a negative impact on oral health-related quality of life. Mandibular protrusion was related to physical pain (ß = 2.74, p = 0.029). Anterior open bite (ß = 4.44, p = 0.004) and anterior crossbite (ß = 2.61, p = 0.026) were related to psychological disability. Diastema was related to social disability (ß = 3.42, p = 0.037) and handicap (ß = 2.74, p = 0.044). CONCLUSION: The findings suggest that smoking, arthrosis and orofacial alterations (mandibular protrusion, open bite, crossbite and diastema) have a negative impact on oral health-related quality of life in acromegaly patients.

A three-dimensional investigation of mandibular deviation in patients with mandibular prognathism.

BACKGROUND: Craniofacial disharmony in cases of jaw deformity associated with abnormal lateral deviation of the jaw mostly involves both the maxilla and mandible. However, it has been still difficult to capture the jaw deviation aspect in a 3-dimensional and quantitative techniques. In this study, we focused on 3-dimensional mandibular morphology and position of the condylar head in relation to the base of the skull in patients with mandibular prognathism, one of the most common jaw deformities. We used cluster analysis to quantify and classify deviation and clarified its characteristics. We also investigated the degree of correlation between those findings and menton (Me) deviation measured on frontal cephalograms, which is a conventional indicator of jaw deformity. RESULTS: Findings obtained from 100 patients (35 men, 65 women) were classified into the following three groups based on mandibular morphology and condylar position relative to the skull base. Then, reclassification using these parameters enabled classification of cluster analysis findings into seven groups based on abnormal jaw deviation characteristics. Comparison among these seven groups showed that the classification criteria were ramus height, mandibular body length, distance from the gonion to the apex of the coronoid process, and the lateral and vertical positions of the mandible. Weak correlation was also found between Me deviation on frontal cephalograms and each of the above parameters measured on 3D images. CONCLUSIONS: Focusing on mandibular morphology and condylar position relative to the skull base in patients with mandibular prognathism, we used cluster analysis to quantify and classify jaw deviation. The present results showed that the 3D characteristics of the mandible based on mandibular morphology and condylar position relative to the skull base can be classified into seven groups. Further, we clarified that Me deviation on frontal cephalograms, which has been used to date, is inadequate for capturing jaw deviation characteristics.

Surgical cutting guide and single plate fixation for intraoral vertical ramus osteotomy.

With the advancement of digital technology over the last few decades, the use of virtual surgical planning and fabrication of surgical guides have tremendously improved the outcomes of various maxillofacial surgical procedures. The intraoral vertical ramus osteotomy (IVRO) is an orthognathic surgical procedure largely employed for mandibular setback in correcting dentofacial deformities. This study describes the design and application of a surgical cutting guide for IVRO. The guide can also be used to facilitate the placement of miniplate fixation. The initial experience at the authors' centre suggests that the guide has allowed the osteotomy to be performed with increased precision and confidence. Furthermore, the use of miniplate fixation decreased the period of maxillomandibular fixation. However, a larger series is required to evaluate the utility of this system more thoroughly.

Tongue Reduction Surgery Improves Mandibular Prognathism in Beckwith-Wiedemann Syndrome Without Compromising Tongue Function.

OBJECTIVES: This study evaluated the surgical outcomes of patients with Beckwith-Wiedemann syndrome who underwent tongue-reduction surgery and analyzed whether the malocclusion and mandibular prognathism caused by macroglossia could be improved. METHODS: A retrospective medical record review was performed for 11 patients with Beckwith-Wiedemann syndrome whose macroglossia was surgically treated. Demographic data, symptoms and signs, and intraoperative and postoperative surgical outcomes were evaluated. Surgery was performed by a single surgeon using the "keyhole" technique, involving midline elliptical excision and anterior wedge resection. Preoperative and postoperative plain skull lateral X-rays were evaluated to assess prognathism improvement. RESULTS: The median age at the time of surgery was 35.09 months, and the ratio of males to females was 4:7. The median surgical time was 98±31.45 minutes, and the median duration of the postoperative intensive care unit stay was 3.81±2.4 days. There were no airway complications. Two patients (18.2%) had postoperative wound dehiscence; however, there was no nerve damage, recurrence, or other complications. Among the five patients who underwent postoperative speech evaluation, all showed normal speech development, except one patient who had brain dysfunction and developmental delay. Measurements of the A point-nasion-B point (ANB) angles and sella-nasion-B point (SNB) angles (point A is the most concave point of the anterior maxilla; point B is the most concave point on the mandibular symphysis) on plain X-rays showed a significant decrease in the postoperative SNB angle (P <0.001) and a significant increase in the ANB angle (P <0.011). CONCLUSION: Tongue-reduction surgery is an effective and safe technique for severe forms of macroglossia associated with Beckwith-Wiedemann syndrome. In addition, it improves mandibular prognathism in young Beckwith-Wiedemann syndrome patients with macroglossia.

A detailed radiomorphometric analysis of the mandibular foramen, lingula and anti-lingula with a special emphasis on mandibular prognathism.

INTRODUCTION: The aim of this study was to evaluate radiomorphometric differences of mandibular foramen (MF), lingula (Li), and anti-lingula (AL) between prognathic and non-prognathic patients, using cone-beam computed tomography (CBCT). METHODS: A total of 228 3D CBCT images of 57 prognathic and 57 non-prognathic patients were retrospectively evaluated. The distances between MF or Li to occlusal plane (OP), anterior border of ramus (AR), posterior border of ramus (PR), sigmoid notch (SN), gonion (Go) and distances Li to MF were measured. The presence of AL, and the distances to Li were also assessed in both groups. RESULTS: In prognathic patients the mean distances of MF-AR and Li-PR were lesser, and Li-OP was greater (p < 0.05). However, distances from MF or Li to the other ramal landmarks were similar in both groups (p > 0.05). Presence of AL was found at 53 sides in prognathic and 20 sides in non-prognathic groups (p < 0.05). The horizontal distance of Li-MF was greater in prognathic patients (p < 0.05). On the other hand, there was no difference between groups regarding the horizontal distance of Li-Al, and the vertical distances of Li-MF and Li-AL (p > 0.05). CONCLUSION: The present study provided valuable data regarding morphological differences of MF-AR, Li-MF and Li-OP, which should be considered in the preoperative assessment of patients with mandibular prognathism. Presence of AL was more common in prognathic patients and mainly located above Li. 3D CBCT applications facilitated assessment of AL and its relationship with Li.

Bite force changes after surgical correction of mandibular prognathism in subjects with increased vertical dimension : A prospective clinical trial.

PURPOSE: Occlusal bite force (OBF) is the most important parameter in assessing biting efficiency. The aim of this study was to record OBF changes after surgical correction of high angle maxillary/mandibular (Max/Mand) class III patients and to compare these with that recorded in class III patients with average Max/Mand angle. MATERIALS AND METHODS: Initially included were 42 patients with severe class III skeletal malocclusion who were scheduled for orthodontic surgery: group 1-22 patients with increased vertical relationship scheduled for bimaxillary surgery; group 2-20 patients with average vertical relationship scheduled for mandibular setback only. OBF measurements before surgery (T0), at debonding (T1) and at least 3 months after debonding (T2) were recorded using a portable occlusal force gauge. The following were also measured: maximum OBF (MOBF) achieved by the subject on each side, averaged OBF on each side (AOBF) and maximum OBF at the incisal region (MIOBF). At T2, only 33 patients (group 1: 17 and group 2: 16) were included in the analysis due to loss to follow-up. RESULTS: MOBF increased significantly in group 1, while no significant changes were detected in group 2. MIOBF increased after surgical correction in both groups. Significant increase in MIOBF was observed at T1 (P < 0.001) followed by an insignificant decrease during the observation period (3-6 months after treatment; P > 0.05). The two groups differed significantly in MOBF at T1 and T2, while no statistically significant differences were detected between the groups for MIOBF changes at the various time intervals (P > 0.05). The number of posterior teeth with occlusal contacts increased in both groups. Relapse was detected in group 1 where the number of posterior teeth in contact decreased during the observation period (T1-T2). CONCLUSION: OBF greatly improved after surgical correction of the vertical morphology. Correction of high angle mandibular prognathism improves oral function in addition to esthetics.

Three-Dimensional Analysis of the Cranial Base Structure in Patients with Facial Asymmetry.

Facial asymmetry is often seen in patients with skeletal mandibular prognathism and is associated with deformities in the maxillofacial and head regions. The maxillofacial deviation is three-dimensional and affects not only the lateral deviation of the mandible and midface, but also the cranium. This study conducted a three-dimensional morphological evaluation of the cranial base morphology of patients with skeletal mandibular prognathism (ANB < 0°, Wits < 0 mm) with the aim of examining the relationship between deformities of the head region and facial asymmetry. Data obtained from computed tomography conducted during the initial examination of patients with and without skeletal mandibular prognathism with facial asymmetry were used. Differences in the position of structures present in the cranial base were measured, and the association between cranial deformities and mandibular deviation was assessed. The middle cranial base area and the lateral deviation of the mandibular fossa were significantly larger in patients with facial asymmetry compared to those without facial asymmetry. In addition, a correlation between the amount of mandibular deviation and the area of the anterior cranial base was identified in patients with significant cranial deformity (p = 0.012). Given the identified association between the structure of the head region and facial asymmetry, further studies are needed to determine the factors implicated in the growth process.