Modular Golden Gate Assembly of Linear DNA Templates for Cell-Free Prototyping.

Cell-free transcription and translation (TXTL) systems have emerged as a powerful tool for testing genetic regulatory elements and circuits. Cell-free prototyping can dramatically accelerate the design-build-test-learn cycle of new functions in synthetic biology, in particular when quick-to-assemble linear DNA templates are used. Here, we describe a Golden-Gate-assisted, cloning-free workflow to rapidly produce linear DNA templates for TXTL reactions by assembling transcription units from basic genetic parts of a modular cloning toolbox. Functional DNA templates composed of multiple parts such as promoter, ribosomal binding site (RBS), coding sequence, and terminator are produced in vitro in a one-pot Golden Gate assembly reaction followed by polymerase chain reaction (PCR) amplification. We demonstrate assembly, cell-free testing of promoter and RBS combinations, as well as characterization of a repressor-promoter pair. By eliminating time-consuming transformation and cloning steps in cells and by taking advantage of modular cloning toolboxes, our cell-free prototyping workflow can produce data for large numbers of new assembled constructs within a single day.

Planning for complex inferior vena cava filter retrievals: the implementation and effectiveness of 3D printed models.

BACKGROUND: Inferior vena cava filter (IVC) retrieval is most often routine but can be challenging with high morbidity in complex cases, especially those with an extended dwelling time. While risk of morbidity in complex retrievals is decreased with advanced filter retrieval techniques, deciding when and which to use these requires detailed pre-procedural planning. The purpose of our study was to evaluate patient-specific 3D printed anatomic IVC filter models for aiding complex IVC filter retrievals. METHODS: All IVC filter retrieval patients between June 2021 and September 2022 at one academic medical hospital were prospectively screened. Nine met criteria for complex retrieval, and their CT images were used to 3D print patient-specific IVC and filter models. Models were used in pre-procedural planning and clinical utility was assessed using the Anatomic Model Utility Likert Questionnaire and estimations of the procedural and fluoroscopy time saved. RESULTS: The usage of 3D printed models in pre-procedural planning had high clinical utility based on the Likert questionnaire (Anatomic Model Utility Points 366.7 ± 103.1). Using a model significantly increased confidence in planning (p = 0.03) and modified the treatment plan in seven cases. It also led to cost-efficient use of resources in the procedure suite with estimated reduction in procedure and fluoroscopy time of 29.0 [20.3] (p = 0.003) and 10.2 [6.7] (p = 0.002) minutes, respectively. CONCLUSION: 3D printed anatomic models for patients who require complex IVC filter retrieval demonstrated Likert-based high clinical utility and led to estimated reductions of procedural and fluoroscopy time.

Clinical and Radiographic Evaluation of Soft Tissue and Bone Status in Immediate Loaded Implants Placed Following Their Extraction in the Maxillary Anterior Region.

INTRODUCTION: In the maxillary anterior region, teeth extraction leads to significant soft and hard tissue changes. Immediate implant placement following extraction aims to reduce bone loss and overall treatment time. However, it may result in adverse soft tissue changes impacting esthetics. This study evaluates the clinical and radiographic outcomes of immediately loaded implants in the maxillary anterior region, focusing on soft tissue preservation and bone status. MATERIALS AND METHODS: This study, conducted from April 2022 to August 2024 at the Department of Oral and Maxillofacial Surgery, Ragas Dental College and Hospital, included 10 immediately loaded implants in seven patients. Following atraumatic extraction, implants were placed and loaded with functional provisional crowns fabricated using three-dimensional (3D) rapid prototyping models. Parameters such as crestal bone loss, buccal and palatal bone width, and interdental papilla thickness were evaluated preoperatively and postoperatively using radiographs and clinical assessments. RESULTS: The study found significant crestal bone loss at both mesial and distal sites over time, with the greatest loss observed at the three-month follow-up. Buccal and palatal bone width showed no significant differences preoperatively and postoperatively. Interdental papilla thickness and overall pink esthetic scores also showed no significant differences between preoperative and postoperative evaluations. CONCLUSION: Immediate implant placement in the maxillary anterior region, using 3D rapid prototyping for custom splint fabrication, demonstrated effective preservation of soft tissue profile and bone architecture. This approach provides functional and esthetic benefits, although careful monitoring of crestal bone loss is necessary.

3D Printing in Biocatalysis and Biosensing: From General Concepts to Practical Applications.

3D printing has matured into a versatile technique that offers researchers many different printing methods and materials with varying properties. Nowadays, 3D printing is deployed within a myriad of different applications, ranging from chemistry to biotechnology - including bioanalytics, biocatalysis or biosensing. Due to its inherent design flexibility (which enables rapid prototyping) and ease of use, 3D printing is facilitating the relatively quick and easy creation of new devices with unprecedented functions. This review article describes how 3D printing can be employed for research in the fields of biochemistry and biotechnology, and specifically for biocatalysis and biosensor applications. We survey different relevant 3D printing techniques, as well as the surface activation and functionalization of 3D-printed materials. Finally, we show how 3D printing is used for the fabrication of reaction ware and enzymatic assays in biocatalysis research, as well as for the generation of biosensors using aptamers, antibodies, and enzymes as recognition elements.

Three-Dimensionally Printed Microsystems to Facilitate Flow-Based Study of Cells from Neurovascular Barriers of the Retina.

Rapid prototyping has produced accessible manufacturing methods that offer faster and more cost-effective ways to develop microscale systems for cellular testing. Commercial 3D printers are now increasingly adapted for soft lithography, where elastomers are used in tandem with 3D-printed substrates to produce in vitro cell assays. Newfound abilities to prototype cellular systems have begun to expand fundamental bioengineering research in the visual system to complement tissue engineering studies reliant upon complex microtechnology. This project used 3D printing to develop elastomeric devices that examined the responses of retinal cells to flow. Our experiments fabricated molds for elastomers using metal milling, resin stereolithography, and fused deposition modeling via plastic 3D printing. The systems were connected to flow pumps to simulate different flow conditions and examined phenotypic responses of endothelial and neural cells significant to neurovascular barriers of the retina. The results indicated that microdevices produced using 3D-printed methods demonstrated differences in cell survival and morphology in response to external flow that are significant to barrier tissue function. Modern 3D printing technology shows great potential for the rapid production and testing of retinal cell responses that will contribute to both our understanding of fundamental cell response and the development of new therapies. Future studies will incorporate varied flow stimuli as well as different extracellular matrices and expanded subsets of retinal cells.

Investigating Additive Manufacturing Possibilities for an Unmanned Aerial Vehicle with Polymeric Materials.

Fused filament fabrication, also known as fused deposition modeling and 3D printing, is the most common additive manufacturing technology due to its cost-effectiveness and customization flexibility compared to existing alternatives. It may revolutionize unmanned aerial vehicle (UAV) design and fabrication. Therefore, this study hypothesizes the 3D printing possibility of UAV using a simple desktop printer and polymeric material. The extensive literature analysis identified the acceptable prototyping object and polymeric material. Thus, the research focuses on applying polylactic acid (PLA) in manufacturing the flying wing-type UAV and develops a fabrication concept to replicate arial vehicles initially produced from a mixture of expanded polystyrene and polyethylene. The material choice stems from PLA's non-toxicity, ease of fabrication, and cost-effectiveness. Alongside ordinary PLA, this study includes lightweight PLA to investigate the mechanical performance of this advanced material, which changes its density depending on the printing temperature. This proof-of-concept study explores the mechanical properties of printed parts of the wing prototype. It also considers the possibility of fragmentation in fabricated objects because of the limitations of printing space. The simplified bending tests identified significant reserves in the mechanical performance regarding the theoretical resistance of the material in the wing prototype, which proves the raised hypothesis and delivers the object for further optimization. Focusing on the mechanical resistance, this study ignored rheology and durability issues, which require additional investigations. Fabricating the wing of the exact geometry reveals acceptable precision of the 3D printing processes but highlights the problematic technology issues requiring further resolution.

The Bioinspired Prosumer-Interactions between Bioinspired Design Methods in the Prosumer Scope.

The emergence of prosumers, who actively participate in designing and producing goods, has generated a growing interest in homemade products. Factors such as design methods, component reuse, or digital fabrication empower prosumer designers to realize their ideas. Although there are cases of bioinspired products manufactured by prosumers, the interactions between bioinspired design methods in the prosumer field have not been addressed from an academic point of view. This article presents a case that combines bioinspired design methods with prosumer characteristics from the perspective of a designer who uses biological research results whilst acting as a prosumer. The proposal is to see whether working on a small scale, without the need for biomimetics experts, and independently, as a prosumer, is feasible and valuable. As a result, a bicycle flashlight is designed with a microgenerator bioinspired by the geometry of samara seeds, and is tested in a wind tunnel. This case shows that the integration of a bioinspired design in prosumer contexts poses unique challenges and requires a multidisciplinary approach. Furthermore, the application of a bioinspired approach in this case has not only provided a certain level of novelty to the final product, but has also improved its efficiency and reduced its financial expenditure.

3D-printed temporal bone models for training: Does material transparency matter?

PURPOSE: To investigate the impact of 3D-printed temporal bone models with two different material transparencies on trainees' mastoidectomy performance. METHODS: Eleven ORL residents performed two anatomical mastoidectomies with posterior tympanotomy on two 3D-printed models with different transparency and VR simulation training. Participants where divided into two groups based on their experience. Within each group participants were randomized to start with the model printed in a completely opaque material or in a material featuring some degree of transparency. After drilling on 3D-printed models, the participants performed two similar mastoidectomies on human cadavers: one on the left side of one cadaver and one on the right side of another cadaver. After drilling 3D-printed models and cadavers, the final-product performances were evaluated by two experienced raters using the 26-item modified Welling Scale. Participants also evaluated the models using a questionnaire. RESULTS: Overall, the participants performed 25 % better on the 3D-printed models featuring transparency compared to the opaque models (18.6 points vs 14.9 points, mean difference = 3.7, 95 % CI 2.0-5.3, P < 0.001)). This difference in performance was independent of which material the participants had drilled first. In addition, the residents also subjectively rated the transparent model to be closer to cadaver dissection. The experienced group starting with the 3D-printed models scored 21.5 points (95 % CI 20.0-23.1), while the group starting with VR simulation training score 18.4 points (95 % CI 16.6-20.3). CONCLUSION: We propose that material used for 3D-printing temporal bone models should feature some degree of transparency, like natural bone, for trainees to learn and exploit key visual cues during drilling.

Fabrication of high-resolution, flexible, laser-induced graphene sensors via stencil masking.

The advent of wearable sensing platforms capable of continuously monitoring physiological parameters indicative of health status have resulted in a paradigm shift for clinical medicine. The accessibility and adaptability of such portable, unobtrusive devices enables proactive, personalized care based on real-time physiological insights. While wearable sensing platforms exhibit powerful capabilities for continuously monitoring physiological parameters, device fabrication often requires specialized facilities and technical expertise, restricting deployment opportunities and innovation potential. The recent emergence of rapid prototyping approaches to sensor fabrication, such as laser-induced graphene (LIG), provides a pathway for circumventing these barriers through low-cost, scalable fabrication. However, inherent limitations in laser processing restrict the spatial resolution of LIG-based flexible electronic devices to the minimum laser spot size. For a CO2 laser-a commonly reported laser for device production-this corresponds to a feature size of ∼120 µm. Here, we demonstrate a facile, low-cost stencil-masking technique to reduce the minimum resolvable feature size of a LIG-based device from 120 ± 20 µm to 45 ± 3 µm when fabricated by CO2 laser. Characterization of device performance reveals this stencil-masked LIG (s-LIG) method yields a concomitant improvement in electrical properties, which we hypothesize is the result of changes in macrostructure of the patterned LIG. We showcase the performance of this fabrication method via production of common sensors including temperature and multi-electrode electrochemical sensors. We fabricate fine-line microarray electrodes not typically achievable via native CO2 laser processing, demonstrating the potential of the expanded design capabilities. Comparing microarray sensors made with and without the stencil to traditional macro LIG electrodes reveals the s-LIG sensors have significantly reduced capacitance for similar electroactive surface areas. Beyond improving sensor performance, the increased resolution enabled by this metal stencil technique expands capabilities for scalable fabrication of high-performance wearable sensors in low-resource settings without reliance on traditional fabrication pathways.

3D-printing inherently MRI-visible accessories in aiding MRI-guided biopsies.

BACKGROUND: 3D printers have gained prominence in rapid prototyping and viable in creating dimensionally accurate objects that are both safe within a Magnetic Resonance Imaging (MRI) environment and visible in MRI scans. A challenge when making MRI-visible objects using 3D printing is that hard plastics are invisible in standard MRI scans, while fluids are not. So typically, a hollow object will be printed and filled with a liquid that will be visible in MRI scans. This poses an engineering challenge however since objects created using traditional Fused Deposition Modeling (FDM) 3D-printing techniques are prone to leakage. Digital Light Processing (DLP) is a relatively modern and affordable 3D-printing technique using UV-hardened resin, capable of creating objects that are inherently liquid-tight. When printing hollow parts using DLP printers, one typically requires adding drainage holes for uncured liquid resin to escape during the printing process. If this is not done liquid resin will remain inside the object, which in our application is the desired outcome. PURPOSE: We devised a method to produce an inherently MRI-visible accessory using DLP technology with low dimensional tolerance to facilitate MRI-guided breast biopsies. METHODS: By hollowing out the object without adding drainage holes and tuning printing parameters such as z-lift distance to retain as much uncured liquid resin inside as possible through surface tension, objects that are inherently visible in MRI scans can be created without further post-processing treatment. RESULTS: Objects created through our method are simple and inexpensive to recreate, have minimal manufacturing steps, and are shown to be dimensionally exact and inherently MRI visible to be directly used in various applications without further treatment. CONCLUSION: Our proposed method of manufacturing objects that are inherently both MRI safe, and MRI visible. The proposed process is simple and does not require additional materials and tools beyond a DLP 3D-printer. With only an inexpensive DLP 3D-printer kit and basic cleaning and sanitation materials found in the hospital, we have demonstrated the viability of our process by successfully creating an object containing fine structures with low spatial tolerances used for MRI-guided breast biopsies.

Rapid Biofabrication of an Advanced Microphysiological System Mimicking Phenotypical Heterogeneity and Drug Resistance in Glioblastoma.

Microphysiological systems (MPSs) reconstitute tissue interfaces and organ functions, presenting a promising alternative to animal models in drug development. However, traditional materials like polydimethylsiloxane (PDMS) often interfere by absorbing hydrophobic molecules, affecting drug testing accuracy. Additive manufacturing, including 3D bioprinting, offers viable solutions. GlioFlow3D, a novel microfluidic platform combining extrusion bioprinting and stereolithography (SLA) is introduced. GlioFlow3D integrates primary human cells and glioblastoma (GBM) lines in hydrogel-based microchannels mimicking vasculature, within an SLA resin framework using cost-effective materials. The study introduces a robust protocol to mitigate SLA resin cytotoxicity. Compared to PDMS, GlioFlow3D demonstrated lower small molecule absorption, which is relevant for accurate testing of small molecules like Temozolomide (TMZ). Computational modeling is used to optimize a pumpless setup simulating interstitial fluid flow dynamics in tissues. Co-culturing GBM with brain endothelial cells in GlioFlow3D showed enhanced CD133 expression and TMZ resistance near vascular interfaces, highlighting spatial drug resistance mechanisms. This PDMS-free platform promises advanced drug testing, improving preclinical research and personalized therapy by elucidating complex GBM drug resistance mechanisms influenced by the tissue microenvironment.

Rapid prototyping of perfusion cell culture devices for three-dimensional imaging of mesenchymal stem cell deposition and proliferation.

Perfusion of porous scaffolds transports cells to the surface to yield cellular constructs for 3D models of disease and for tissue engineering applications. While ceramic scaffolds mimic the structure and composition of trabecular bone, their opacity and tortuous pores limit the penetration of light into the interior. Scaffolds that are both perfusable and amenable to fluorescence microscopy are therefore needed to visualize the spatiotemporal dynamics of cells in the bone microenvironment. In this study, a hybrid injection molding approach was designed to enable rapid prototyping of collector arrays with variable configurations that are amenable to longitudinal imaging of attached human mesenchymal stem cells (hMSCs) using fluorescence microscopy. Cylindrical collectors were arranged in an array that is permeable to perfusion in the xy-plane and to light in the z-direction for imaging from below. The effects of the collector radius, number, and spacing on the collection efficiency of perfused hMSCs was simulated using computational fluid dynamics (CFD) and measured experimentally using fluorescence microscopy. The effect of collector diameter on simulated and experimental cell collection efficiencies followed a trend similar to that predicted by interception theory corrected for intermolecular and hydrodynamic forces for the arrays with constant collector spacing. In contrast, arrays designed with constant collector number yielded collection efficiencies that poorly fit the trend with collector radius predicted by interception theory. CFD simulations of collection efficiency agreed with experimental measurements within a factor of two. These findings highlight the utility of CFD simulations and hybrid injection molding for rapid prototyping of collector arrays to optimize the longitudinal imaging of cells without the need for expensive and time-consuming tooling.

Enhancing 3D-printed denture base resins: A review of material innovations.

The limited physical and mechanical properties of polymethyl methacrylate (PMMA), the current gold standard, necessitates exploring improved denture base materials. While three-dimensional (3D) printing offers accuracy, efficiency, and patient comfort advantages, achieving superior mechanics in 3D-printed denture resins remains challenging despite good biocompatibility and esthetics. This review investigates the potential of innovative materials to address the limitations of 3D-printed denture base materials. Thus, this article is organized to provide a comprehensive overview of recent efforts to enhance 3D-printed denture base materials, highlighting advancements. It critically examines the impact of incorporating various nanoparticles (zirconia, titania, etc.) on these materials' physical and mechanical properties. Additionally, it delves into recent strategies for nanofiller surface treatment and biocompatibility evaluation and explores potential future directions for polymeric composites in denture applications. The review finds that adding nanoparticles significantly improves performance compared to unmodified resins, and properties can be extensively enhanced through specific modifications, particularly silanized nanoparticles. Optimizing 3D-printed denture acrylics requires a multifaceted approach, with future research prioritizing novel nanomaterials and surface modification techniques for a novel generation of superior performance, esthetically pleasing, and long-lasting dentures.

Wearable Robot Design Optimization Using Closed-Form Human-Robot Dynamic Interaction Model.

Wearable robots are emerging as a viable and effective solution for assisting and enabling people who suffer from balance and mobility disorders. Virtual prototyping is a powerful tool to design robots, preventing the costly iterative physical prototyping and testing. Design of wearable robots through modelling, however, often involves computationally expensive and error-prone multi-body simulations wrapped in an optimization framework to simulate human-robot-environment interactions. This paper proposes a framework to make the human-robot link segment system statically determinate, allowing for the closed-form inverse dynamics formulation of the link-segment model to be solved directly in order to simulate human-robot dynamic interactions. The paper also uses a technique developed by the authors to estimate the walking ground reactions from reference kinematic data, avoiding the need to measure them. The proposed framework is (a) computationally efficient and (b) transparent and easy to interpret, and (c) eliminates the need for optimization, detailed musculoskeletal modelling and measuring ground reaction forces for normal walking simulations. It is used to optimise the position of hip and ankle joints and the actuator torque-velocity requirements for a seven segments of a lower-limb wearable robot that is attached to the user at the shoes and pelvis. Gait measurements were carried out on six healthy subjects, and the data were used for design optimization and validation. The new technique promises to offer a significant advance in the way in which wearable robots can be designed.

Prototyping in Polymethylpentene to Enable Oxygen-Permeable On-a-Chip Cell Culture and Organ-on-a-Chip Devices Suitable for Microscopy.

With the rapid development and commercial interest in the organ-on-a-chip (OoC) field, there is a need for materials addressing key experimental demands and enabling both prototyping and large-scale production. Here, we utilized the gas-permeable, thermoplastic material polymethylpentene (PMP). Three methods were tested to prototype transparent PMP films suitable for transmission light microscopy: hot-press molding, extrusion, and polishing of a commercial, hazy extruded film. The transparent films (thickness 20, 125, 133, 356, and 653 µm) were assembled as the cell-adhering layer in sealed culture chamber devices, to assess resulting oxygen concentration after 4 days of A549 cell culture (cancerous lung epithelial cells). Oxygen concentrations stabilized between 15.6% and 11.6%, where the thicker the film, the lower the oxygen concentration. Cell adherence, proliferation, and viability were comparable to glass for all PMP films (coated with poly-L-lysine), and transparency was adequate for transmission light microscopy of adherent cells. Hot-press molding was concluded as the preferred film prototyping method, due to excellent and reproducible film transparency, the possibility to easily vary film thickness, and the equipment being commonly available. The molecular orientation in the PMP films was characterized by IR dichroism. As expected, the extruded films showed clear orientation, but a novel result was that hot-press molding may also induce some orientation. It has been reported that orientation affects the permeability, but with the films in this study, we conclude that the orientation is not a critical factor. With the obtained results, we find it likely that OoC models with relevant in vivo oxygen concentrations may be facilitated by PMP. Combined with established large-scale production methods for thermoplastics, we foresee a useful role for PMP within the OoC field.

Chloroplast Cell-Free Systems from Different Plant Species as a Rapid Prototyping Platform.

Climate change poses a significant threat to global agriculture, necessitating innovative solutions. Plant synthetic biology, particularly chloroplast engineering, holds promise as a viable approach to this challenge. Chloroplasts present a variety of advantageous traits for genetic engineering, but the development of genetic tools and genetic part characterization in these organelles is hindered by the lengthy time scales required to generate transplastomic organisms. To address these challenges, we have established a versatile protocol for generating highly active chloroplast-based cell-free gene expression (CFE) systems derived from a diverse range of plant species, including wheat (monocot), spinach, and poplar trees (dicots). We show that these systems work with conventionally used T7 RNA polymerase as well as the endogenous chloroplast polymerases, allowing for detailed characterization and prototyping of regulatory sequences at both transcription and translation levels. To demonstrate the platform for characterization of promoters and 5' and 3' untranslated regions (UTRs) in higher plant chloroplast gene expression, we analyze a collection of 23 5'UTRs, 10 3'UTRs, and 6 chloroplast promoters, assessed their expression in spinach and wheat extracts, and found consistency in expression patterns, suggesting cross-species compatibility. Looking forward, our chloroplast CFE systems open new avenues for plant synthetic biology, offering prototyping tools for both understanding gene expression and developing engineered plants, which could help meet the demands of a changing global climate.

Advantages of stereolithographic 3D printing in the fabrication of the Affiblot device for dot-blot assays.

In stereolithographic (SLA) 3D printing, objects are constructed by exposing layers of photocurable resin to UV light. It is a highly user-friendly fabrication method that opens a possibility for technology sharing through CAD file online libraries. Here, we present a prototyping procedure of a microfluidics-enhanced dot-blot device (Affiblot) designed for simple and inexpensive screening of affinity molecule characteristics (antibodies, oligonucleotides, cell receptors, etc.). The incorporation of microfluidic features makes sample processing user-friendly, less time-consuming, and less laborious, all performed completely on-device, distinguishing it from other dot-blot devices. Initially, the Affiblot device was fabricated using CNC machining, which required significant investment in manual post-processing and resulted in low reproducibility. Utilization of SLA 3D printing reduced the amount of manual post-processing, which significantly streamlined the prototyping process. Moreover, it enabled the fabrication of previously impossible features, including internal fluidic channels. While 3D printing of sub-millimeter microchannels usually requires custom-built printers, we were able to fabricate microfluidic features on a readily available commercial printer. Open microchannels in the size range 200-300 µm could be fabricated with reliable repeatability and sealed with a replaceable foil. Economic aspects of device fabrication are also discussed.

Rapid prototyping and facile customization of conductive hydrogel bioelectronics based on all laser process.

Proper customization in size and shape is essential in implantable bioelectronics for stable bio-signal recording. Over the past decades, many researchers have heavily relied on conventional photolithography processes to fabricate implantable bioelectronics. Therefore, they could not avoid the critical limitation of high cost and complex processing steps to optimize bioelectronic devices for target organs with various sizes and shapes. Here, we propose rapid prototyping using all laser processes to fabricate customized bioelectronics. PEDOT:PSS is selectively irradiated by an ultraviolet (UV) pulse laser to form wet-stable conductive hydrogels that can softly interact with biological tissues (50 µm line width). The encapsulation layer is selectively patterned using the same laser source by UV-curing polymer networks (110 µm line width). For high stretchability (over 100%), mesh structures are made by the selective laser cutting process. Our rapid prototyping strategy minimizes the use of high-cost equipment, using only a single UV laser source to process the electrodes, encapsulation, and substrates that constitute bioelectronics without a photomask, enabling the prototyping stretchable microelectrode array with an area of 1 cm2 less than 10 min. We fabricated an optimized stretchable microelectrode array with low impedances (∼1.1 kΩ at 1 kHz) that can effectively record rat's cardiac signals with various health states.

The Roles of Microprobe in Localized Electrodeposition: Electrolyte Localized Transport and Force-Displacement Sensitivity.

Facing the rapid development of 6G communication, long-wave infrared metasurface and biomimetic microfluidics, the performance requirements for microsystems based on metal tiny structures are gradually increasing. As one of powerful methods for fabrication metal complex microstructures, localized electrochemical deposition microadditive manufacturing technology can fabricate copper metal micro overhanging structures without masks and supporting materials. In this study, the role of the microprobe cantilever (MC) in localized electrodeposition was studied. The MC can be used for precise deposition with electrolyte localized transport function and high accuracy force-displacement sensitivity. To prove this, the electrolyte flow was simulated when the MC was in bending or normal state. The simulation results can indicate the influence of turbulent flow on the electrolyte flow velocity and the pressure at the end of the pyramid. The results show that the internal flow velocity increased by 8.9% in the bending probe as compared with normal. Besides, this study analyzed the force-potential sensitivity characteristics of the MC. Using the deformation of the MC as an intermediate variable, the model of the probe tip displacement caused by the growth of the deposit and the voltage value displayed by the photodetector was mathematically established. In addition, the deposition of a single voxel was simulated by simulation process with the simulated height of 520 nm for one voxel, and the coincidence of simulation and experimental results was 93.1%. In conclusion, this method provides a new way for localized electrodeposition of complex microstructures.

Surgical Innovation Discovery Course: Utilizing Surgical Trainee Agile Innovation and Empowerment (STAIR) Framework to Promote Innovation Amongst Surgical Residents.

INTRODUCTION: Innovation education programs can help guide and empower surgeons and surgical trainees through the many steps to analyze and de-risk novel ideas to impact healthcare or care delivery. Providing quality programming that is conducive to a surgeon's busy schedule is an ongoing challenge, but even more so for a surgical trainees' schedule. Through a needs assessment and applying lean principles, the "Surgical Trainee Agile Innovation and empoweRment" (STAIR) framework was created to encourage surgical trainees to participate in innovation programming. OBJECTIVE: Numerous works have explored the design and development of learning experiences to support physician innovators. However, there is a lack of evidence supporting frameworks that contribute to innovation empowerment for surgical trainees as a complement to the demands of clinical practice. The following catalogs the systematic design and development of a novel innovation and discovery agile framework tailored to surgical residents with original innovation ideas. DESIGN AND SETTING: The course designed to implement the "Surgical Trainee Agile Innovation and empoweRment" (STAIR) is funded through the Department of Surgery at the University of Michigan. It is an 8-week team-based innovation course designed for surgical residents to learn and apply fundamental innovation concepts to clinical problems. PARTICIPANTS AND RESULTS: Surgical trainees in all programs at the host institution are all eligible to participate. A total of four innovation teams were selected to participate in inaugural course. CONCLUSIONS: The novel instructional design and development of this course encouraged participation in surgical innovation programming. The course aided the development of innovative ideas and inspired interest in innovation among surgical trainees. The STAIR framework is exemplary for inspiring and facilitating innovation among surgical trainees, enhancing the professional experience.