Intermolecular Anionic Mixed-Valence and π-Dimer Complexes of Ortho-Pentannulated BisAzaCoroneneDiimides.

This study reports the serendipitous discovery of intermolecular anionic mixed-valence (MV) and π-dimer species in ortho-pentannulated BisAzaCoroneneDiimides (BACDs) during their electrochemical reduction in a non-aqueous solvent. A library of nitrogen-containing extended PDIs was synthesized via an aza-benzannulation reaction followed by a Pd-catalysed ortho-pentannulation reaction. Ortho-pentannulated BACDs revealed strong aggregation abilities in solution. Concentration-dependent UV-vis absorption spectra, variable temperature 1H NMR experiments, and atomic force microscopy coupled to molecular dynamics support their self-assembly into columnar aggregates. Cyclic voltammetry experiments in dichloromethane reveal prominent splitting of the first reduction wave, attributed to the formation of unprecedented intermolecular anionic MV and π-dimers in organic solvent. These species were thoroughly characterized by real-time spectroelectrochemistry, electrochemical simulations and theoretical calculations. Remarkably, this work underscores the tuneable nature of AzaBenzannulatedPerylene Diimides (AzaBPDIs) and BACDs, emphasizing their potential as a promising scaffold for designing supramolecular materials with long-range radical anion delocalization. The observation of this phenomenon provides insights into the fundamental behaviour of supramolecular organic semiconductors, thereby paving the way for the development of novel electronic devices and electron-deficient materials.

Peri-Alkylated Terrylenes and Ternaphthalenes Building-Blocks Towards Multi-Edge Nanographenes.

Since its first synthesis by Clar in 1948, terrylene - a fully connected ternaphthalene oligomer via naphthalene's peri-positions - has gained special focus within the rylene family, drawing interest for its unique chemical, structural, optoelectronic and single photon emission properties. In this study, we introduce a novel synthetic pathway that enhances the solubility of terrylene derivatives through complete peri-alkylation, while also facilitating extensions at the bay-positions. This approach not only broadens the scope of terrylene's chemical versatility but also opens new avenues for developing solution processable novel multi-edge nanographenes and tailoring electronic energy levels through topological edge structures. Our findings include a comprehensive structural and spectroscopic characterization along with transient absorption spectroscopy and photophysics of both the synthesized peri-alkylated terrylene and its phenylene-fused derivative.

Appending Coronene Diimide with Carbon Nanohoops Allows for Rapid Intersystem Crossing in Neat Film.

The development of innovative triplet materials plays a significant role in various applications. Although effective tuning of triplet formation by intersystem crossing (ISC) has been well established in solution, the modulation of ISC processes in the solid state remains a challenge due to the presence of other exciton decay channels through intermolecular interactions. The cyclic structure of cycloparaphenylenes (CPPs) offers a unique platform to tune the intermolecular packing, which leads to controllable exciton dynamics in the solid state. Herein, by integrating an electron deficient coronene diimide (CDI) unit into the CPP framework, a donor-acceptor type of conjugated macrocycle (CDI-CPP) featuring intramolecular charge-transfer (CT) interaction was designed and synthesized. Effective intermolecular CT interaction resulting from a slipped herringbone packing was confirmed by X-ray crystallography. Transient spectroscopy studies showed that CDI-CPP undergoes ISC in both solution and the film state, with triplet generation time constants of 4.5 ns and 238 ps, respectively. The rapid triplet formation through ISC in the film state can be ascribed to the cooperation between intra- and intermolecular charge-transfer interactions. Our results highlight that intermolecular CT interaction has a pronounced effect on the ISC process in the solid state, and shed light on the use of the characteristic structure of CPPs to manipulate intermolecular CT interactions.

Molecular Engineering of Rylene Diimides via Sila-Annulation Toward High-Mobility Organic Semiconductors.

The continuous innovation of captivating new organic semiconducting materials remains pivotal in the development of high-performance organic electronic devices. Herein, a molecular engineering by combining sila-annulation with the vertical extension of rylene diimides (RDIs) toward high-mobility organic semiconductors is presented. The unilateral and bilateral sila-annulated quaterrylene diimides (Si-QDI and 2Si-QDI) are designed and synthesized. In particular, the symmetrical bilateral 2Si-QDI exhibits a compact, 1D slipped π-π stacking arrangement through the synergistic combination of a sizable π-conjugated core and intercalating alkyl chains. Combining the appreciable elevated HOMO levels and reduced energy gaps, the single-crystalline organic field-effect transistors (SC-OFETs) based on 2Si-QDI demonstrate exceptional ambipolar transport characteristics with an impressive hole mobility of 3.0 cm2 V-1 s-1 and an electron mobility of 0.03 cm2 V-1 s-1 , representing the best ampibolar SC-OFETs based on RDIs. Detailed theoretical calculations rationalize that the larger transfer integral along the π-π stacking direction is responsible for the achievement of the superior charge transport. This study showcases the remarkable potential of sila-annulation in optimizing carrier transport performances of polycyclic aromatic hydrocarbons (PAHs).

Amino-Ene Click Reaction of Electron-Deficient π-Conjugated Molecules with Negative Activation Enthalpies.

An amino-ene click reaction is a type of aza-Michael addition reaction that is congruent with click chemistry in terms of its reaction efficiency and rate under mild conditions. The amino-ene click reaction is increasingly recognized as a prominent synthetic tool to form C-N bonds in the context of organic materials chemistry and polymer chemistry. Herein, an unconventional amino-ene click reaction with negative activation enthalpies, in which an electron-deficient π-conjugated molecule, such as a naphthalenediimide, reacts with an amine faster at lower temperatures is reported. The detailed study of the reaction mechanism reveals that the amino-ene click reaction proceeds via a pre-equilibrium reaction, the key to which is the formation of a stable reaction intermediate due to the solvation and charge delocalization on the π-core. By optimizing the reaction conditions, it was demonstrated that the amino-ene click reaction proceeded faster at 273 K than at 347 K, which was easily observed visually.

Furan-Extended Helical Rylenes with Fjord Edge Topology and Tunable Optoelectronic Properties.

Lateral furan-expansion of polycyclic aromatics, which enables multiple O-doping and peripheral edge evolution of rylenes, is developed for the first time. Tetrafuranylperylene TPF-4CN and octafuranylquaterrylene OFQ-8CN were prepared as model compounds bearing unique fjord edge topology and helical conformations. Compared to TPF-4CN, the higher congener OFQ-8CN displays a largely red-shifted (≈333 nm) and intensified absorption band (λmax =829 nm) as well as a narrowed electrochemical band gap (≈1.08 eV) due to its pronounced π-delocalization and emerging of open-shell diradicaloid upon the increase of fjord edge length. Moreover, strong circular dichroism signals in a broad range until 900 nm are observed for open-shell chiral OFQ-8CN, owing to the excellent conformational stability of its central bis(tetraoxa[5]helicene) fragments. Our studies provide insights into the relationships between edge topologies and (chir)optoelectronic properties for this novel type of O-doped PAHs.

Wavelength and Polarization Sensitive Synaptic Phototransistor Based on Organic n-type Semiconductor/Supramolecular J-Aggregate Heterostructure.

Human retina- and brain-inspired optoelectronic synapses, which integrate light detection and signal memory functions for data processing, have significant interest because of their potential applications for artificial vision technology. In nature, many animals such as mantis shrimp use polarized light information as well as scalar information including wavelength and intensity; however, a spectropolarimetric organic optoelectronic synapse has been seldom investigated. Herein, we report an organic synaptic phototransistor, consisting of a charge trapping liquid-crystalline perylene bisimide J-aggregate and a charge transporting crystalline dichlorinated naphthalene diimide, that can detect both wavelength and polarization information. The device shows persistent positive and negative photocurrents under low and high voltage conditions, respectively. Furthermore, the aligned organic heterostructure in the thin-film enables linearly polarized light to be absorbed with a dichroic ratio of 1.4 and 3.7 under transverse polarized blue and red light illumination, respectively. These features allow polarized light sensitive postsynaptic functions in the device. Consequently, a simple polarization imaging sensor array is successfully demonstrated using photonic synapses, which suggests that a supramolecular material is an important candidate for the development of spectropolarimetric neuromorphic vision systems.

Bulk Heterojunction Organic Semiconductor Photoanodes: Tuning Energy Levels to Optimize Electron Injection.

The use of a bulk heterojunction of organic semiconductors to drive photoelectrochemical water splitting is an emerging trend; however, the optimum energy levels of the donor and acceptor have not been established for photoanode operation with respect to electrolyte pH. Herein, we prepare a set of donor polymers and non-fullerene acceptors with varying energy levels to probe the effect of photogenerated electron injection into a SnO2-based substrate under sacrificial photo-oxidation conditions. Photocurrent density (for sacrificial oxidation) up to 4.1 mA cm-2 was observed at 1.23 V vs reversible hydrogen electrode in optimized photoanodes. Moreover, we establish that a lower-lying donor polymer leads to improved performance due to both improved exciton separation and better charge collection. Similarly, lower-lying acceptors also give photoanodes with higher photocurrent density but with a later photocurrent onset potential and a narrower range of pH for good operation due to the Nernstian behavior of the SnO2, which leads to a smaller driving force for electron injection at high pH.

Heavy-Atom-Free Room-Temperature Phosphorescent Rylene Imide for High-Performing Organic Photovoltaics.

Organic phosphorescence, originating from triplet excitons, has potential for the development of new generation of organic optoelectronic materials. Herein, two heavy-atom-free room-temperature phosphorescent (RTP) electron acceptors with inherent long lifetime triplet exctions are first reported. These two 3D-fully conjugated rigid perylene imide (PDI) multimers, as the best nonfullerene wide-bandgap electron acceptors, exhibit a significantly elevated T1 of ≈2.1 eV with a room-temperature phosphorescent emission (τ = 66 µs) and a minimized singlet-triplet splitting as low as ≈0.13 eV. The huge spatial congestion between adjacent PDI skeleton endows them with significantly modified electronic characteristics of S1 and T1 . This feature, plus with the fully-conjugated rigid molecular configuration, balances the intersystem crossing rate and fluorescence/phosphorescence rates, and therefore, elevating ET1 to ≈2.1 from 1.2 eV for PDI monomer. Meanwhile, the highly delocalized feature enables the triplet charge-transfer excitons at donor-acceptor interface effectively dissociate into free charges, endowing the RTP electron acceptor based organic solar cells (OSCs) with a high internal quantum efficiency of 84% and excellent charge collection capability of 94%. This study introduces an alternative strategy for designing PDI derivatives with high-triplet state-energy and provides revelatory insights into the fundamental electronic characteristics, photophysical mechanism, and photo-to-current generation pathway.

Rylene-Fullerene Hybrid an Emerging Electron Acceptor for High-Performing and Photothermal-Stable Ternary Solar Cells.

Molecular carbon imides, especially extended perylene diimides (PDIs) have been the best wide-band-gap nonfullerene acceptors. Despite their excellent photothermal/chemical stability, flexible reaction sites, and unique photoelectronic properties, there is still a lack of fundamental understanding of their molecular characteristics as a third component. Here, generations of PDIs with distinctive molecular architecture, are deliberately screened out as the third component to PM6:Y6. Only a rylene-fullerene hybrid, S-Fuller-PMI, surprisingly boosts the fill factor (FF) of ternary organic solar cells (OSCs) to 0.77 from 0.72 for PM6:Y6 binary ones, and therefore the power conversion efficiency (PCE) of ternary cells is enhanced from 15.3% to 16.2%. Compared with highly-flexible rylene dimer and rigid multimer, S-Fuller-PMI exhibits higher electron mobility, favorable surface tension, and, therefore tailored compatibility with Y6. These formed Y6:S-Fuller-PMI alloys play as a morphological controller to improve charge separation and transport process. Simultaneously, the suppressed photothermal-induced traps, along with inherent enlarged entropy effect, endow the ternary OSCs still with ≈70% of initial PCE even after 500 h continuous illumination, whereas only 53% is left in their binary counterparts. These results provide new insight into the molecular design principle for distinctive molecular carbon imides as the third component for efficient and durable PM6:Y6-based OSCs.

Insights into the Intrinsic Factors Affecting the NIR Reflectance Based on Rylene Diimide Molecules.

A clear understanding of the relationships between molecular structure and NIR reflectance (700-2500 nm) behavior is important and highly desirable for developing appropriate NIR-reflective materials to combat NIR heat radiation from sunlight. In this research, three groups of imide-based compounds have been adopted to investigate the influence of the intrinsic molecular structures on the NIR-reflective properties. It is found out that for the compounds with alkyl groups, the NIR reflectance will increase as the degree of the conjugated backbone increases, especially for the reflectance from 1750 nm to 2500 nm. In addition, despite that the alkyl or amine groups deteriorate the NIR reflectance, the NIR reflectance varies within a certain interval and the isomers with branched alkyl groups show identical or smaller NIR reflectance than those of isomers with linear alkyl groups. For different compounds, crystallinity seems to almost have no relationship with their NIR reflectance.

Self-assembly of rylene-decorated guanine ribbons on graphene surface for optoelectronic applications: a theoretical study.

We are witnessing a change of paradigm from the conventional top-down to the bottom-up fabrication of nanodevices and particularly optoelectronic devices. A promising example of the bottom-up approach is self-assembling of molecules into layers with predictable and reproducible structural, electronic and optical properties. Nucleobases possess extraordinary ability to self-assembly into one-, two-, and three-dimensional structures. Optical properties of nucleotides are not suitable for wider application to optoelectronics and photovoltaics due to their large optical band gap, which is in contrast to rylene-based dyes that have been intensively investigated in organic optoelectronics. However, these lack the self-assembly capability of nucleobases. Combinations of covalently decorated guanine molecules with rylene type chromophores present 'the best of the both worlds'. Due to the large size of such compounds and its flexible nature their self-assemblies have not been fully understood yet. Here, we use a theoretical approach to study the structural, energetic and optical properties of rylene-based dye decorated guanine (GPDI), as self-assembled on a graphene sheet. Particularly we utilize the density-functional based tight-binding method to study atomic structure of these systems including the potential energy surface of GPDI and stability and organization of single- and multilayered GPDIs on graphene sheet. Using density-functional theory (DFT) we employ the energy decomposition analysis to gain a deeper insight into the contributions of different moieties to stability of GPDI films. Using time dependent DFT we analyze optical properties of these systems. We find that atomically thin films consisting of only a few molecular layers with large surface areas are more favorable than isolated thick islands. Our study of excited states indicates existence of charge separated states similar to ones found in the well-studied hydrogen bonded organic frameworks. The self-assembly characterized with a large homogeneous coverage and long-living charge-separated states provide the great potential for optoelectronic applications.

Fuller-Rylenes: Paving the Way for Promising Acceptors.

The hybridization of different acceptors remains a fertile ground awaiting exploration, to fully promote the properties of both components. The concept of this work is to exploit a new form of fuller-rylene hybrids as promising acceptors by integrating planar rylene dye and spherical fullerene for boosting the power conversion efficiency. The synthesis of the fuller-rylenes via a straightforward synthetic strategy by one-pot Pd-catalyzed cyclization can be scaled-up. Specifically, our strategy allows the supplements and enhancement of absorption in the visible region, much wider structural and electronic variations by installing R1 groups as well as decorating R2 on the perylene core at will, and good processability without compromising the superior characteristics of fullerene. Thus, bay-decorated fuller-rylene S-Fuller-PMI revealed a ground-breaking efficiency as high as 8.01%, even outperforming [6,6]-phenyl-C61-butyric acid methyl ester (PC61BM) as a parallel comparison (7.09%). Our exploration paves a new way for the design of high-efficiency acceptors, which are promising alternatives to PC61BM in photovoltaic devices.

Synthesis and Application of Rylene Imide Dyes as Organic Semiconducting Materials.

Rylene imide dyes have been among the most promising organic semiconducting materials for several years due to their remarkable optoelectronic properties and high chemical/thermal stability. In the past decades, various excellent rylene imide dyes have been developed for optoelectronic devices, such as organic solar cells (OSCs) and organic field-effect transistors (OFETs). Recently, tremendous progress of perylene diimides (PDIs) and their analogues for use in OSCs has been achieved, which can be attributed to their ease of functionalization. In this review, we will mainly focus on the synthetic strategies toward to latest PDI dyes and higher rylene imide analogues. A variety of compounds synthesized from different building blocks are summarized, and some properties and applications are discussed.

The 3 D Structure of Twisted Benzo[ghi]perylene-Triimide Dimer as a Non-Fullerene Acceptor for Inverted Perovskite Solar Cells.

Here, we introduced benzo[ghi]perylenetriimide (BPTI) derivatives including monomer and twisted dimer (t-BPTI) as an alternative electron-transport layer (ETL) material to replace the commonly used PC61 BM in inverted planar heterojunction perovskite solar cells (PSCs). Moreover, the double ETL was applied in our PSCs with structure of glass/ITO/PEDOT:PSS/perovskite/BPTI/C60 or PDI-C4/BCP/Al. The use of a double ETL structure can effectively eliminate the leakage current. The devices with the t-BPTI/C60 double ETL yield an average power conversion efficiency of 10.73 % and a maximum efficiency of 11.63 %. The device based on the complete non-fullerene electron acceptors of t-BPTI/PDI-C4 as double ETL achieved maximum efficiency of 10.0 %. Moreover, it was found that the utilization of alloy t-BPTI+BPTI as ETL can effectively reduce the hysteresis effect of PSCs. The results suggest that BPTI-based electron-transport materials are potential alternatives for widely used fullerene acceptors in PSCs.

Exploring High-Performance n-Type Thermoelectric Composites Using Amino-Substituted Rylene Dimides and Carbon Nanotubes.

Taking advantage of the high electrical conductivity of a single-walled carbon nanotube (SWCNT) and the large Seebeck coefficient of rylene diimide, a convenient strategy is proposed to achieve high-performance n-type thermoelectric (TE) composites containing a SWCNT and amino-substituted perylene diimide (PDINE) or naphthalene diimide (NDINE). The obtained n-type composites display greatly enhanced TE performance with maximum power factors of 112 ± 8 (PDINE/SWCNT) and 135 ± 14 (NDINE/SWCNT) µW m-1 K-2. A short doping time of 0.5 h can ensure high TE performance. The corresponding TE module consisting of five p-n junctions reaches a large output power of 3.3 µW under a 50 °C temperature gradient. In addition, the n-type composites exhibit high air stability and excellent thermal stability. This design strategy benefits the future fabricating of high-performance n-type TE materials and devices.

N-annulated perylene-substituted and fused porphyrin dimers with intense near-infrared one-photon and two-photon absorption.

Fusion of two N-annulated perylene (NP) units with a fused porphyrin dimer along the S0-S1 electronic transition moment axis has resulted in new near-infrared (NIR) dyes 1 a/1 b with very intense absorption (ε>1.3×10(5) M(-1) cm(-1)) beyond 1250 nm. Both compounds displayed moderate NIR fluorescence with fluorescence quantum yields of 4.4×10(-6) and 6.0×10(-6) for 1 a and 1 b, respectively. The NP-substituted porphyrin dimers 2 a/2 b have also been obtained by controlled oxidative coupling and cyclodehydrogenation, and they showed superimposed absorptions of the fused porphyrin dimer and the NP chromophore. The excited-state dynamics of all of these compounds have been studied by femtosecond transient absorption measurements, which revealed porphyrin dimer-like behaviour. These new chromophores also exhibited good nonlinear optical susceptibility with large two-photon absorption cross-sections in the NIR region due to extended π-conjugation. Time-dependent density functional theory calculations have been performed to aid our understanding of their electronic structures and absorption spectra.

Fused perylene-phthalocyanine macrocycles: a new family of NIR-dyes with pronounced basicity.

The synthesis and characterization of a new type of chromophore, namely PePc consisting of a central phthalocyanine core and four fused perylene-bisimide (PBI) units is described for the first time. The entire architecture represents a highly extended conjugated heterocyclic π-system with C4h symmetry. In order to guarantee pronounced solubility in organic solvents the corresponding PBI units were bay-functionalized with tert-butylphenoxy substituents. Next to the metal-free macrocycle, PePcH2 , also metallated macrocycles PePcM (M=Zn, Ni, Pb, Ru, Fe) were synthesized. The extensive fusion of the corresponding aromatic building blocks to the very large extended π-system leads to a very narrow HOMO-LUMO gap and as a consequence to transparency in the visible but light absorption in the NIR region. Significantly, the azomethine N-atoms N1N4 of PePcM and PePcH2 are highly basic. The corresponding tetraprotonated systems can only be deprotonated with very strong non-nucleophilic bases such as phosphazene bases. In the protonated forms PePcMH4 (4+) and PePcMH6 (4+) the absorption maximum is shifted back to the visible region due to the loss of conjugation. The experimental findings were corroborated with quantum mechanical calculations.

Laterally expanded rylene diimides with uniform branched side chains for solution-processed air stable n-channel thin film transistors.

Molecular packing motifs in solid states is the dominant factor affecting the n-channel organic field-effect transistors (OFETs). However, few systematic researches were performed in the different extensions of π-conjugated molecules with the uniform substitution effecting the molecular packing motifs. In this manuscript, OFET devices based on three latterally expanded rylene diimides end-functionalized with uniform 3-hexylundecyl substitution on the imide positions were systematically studied on the relationship of molecular stacking, film microstructure, and charge transport. As the π-conjugated systems expanded from doubly linked perylene diimide dimer (d-4CldiPDI, 1), triply linked perylene diimide dimer (t-4CldiPDI, 2), to hybrid array (NDI-PDI-NDI, 3), their corresponding molecular packing motifs exhibited a divide: the optimized molecular configuration became more planar and d (001) spacing distances became larger, which resulted in a larger π-π overlapping. Thus, an enhanced electron mobility was obtained. A typical n-channel field-effect characteristic was observed in thin film devices based on these molecules under ambient conditions. Especially, the hybrid system (3) with more planar and π-expanded aromatic backbone exhibited superior electron mobility approaching 0.44 cm(2) V(-1) s(-1) and on/off ratio of 10(6) after optimal annealing in this study.

para-Quinodimethane-bridged perylene dimers and pericondensed quaterrylenes: the effect of the fusion mode on the ground states and physical properties.

Polycyclic hydrocarbon compounds with a singlet biradical ground state show unique physical properties and promising material applications; therefore, it is important to understand the fundamental structure/biradical character/physical properties relationships. In this study, para-quinodimethane (p-QDM)-bridged quinoidal perylene dimers 4 and 5 with different fusion modes and their corresponding aromatic counterparts, the pericondensed quaterrylenes 6 and 7, were synthesized. Their ground-state electronic structures and physical properties were studied by using various experiments assisted with DFT calculations. The proaromatic p-QDM-bridged perylene monoimide dimer 4 has a singlet biradical ground state with a small singlet/triplet energy gap (-2.97 kcal mol(-1)), whereas the antiaromatic s-indacene-bridged N-annulated perylene dimer 5 exists as a closed-shell quinoid with an obvious intramolecular charge-transfer character. Both of these dimers showed shorter singlet excited-state lifetimes, larger two-photon-absorption cross sections, and smaller energy gaps than the corresponding aromatic quaterrylene derivatives 6 and 7, respectively. Our studies revealed how the fusion mode and aromaticity affect the ground state and, consequently, the photophysical properties and electronic properties of a series of extended polycyclic hydrocarbon compounds.