Dominant strain shift in the invasive fall armyworm (Lepidoptera: Noctuidae) populations in Thailand as inferred from mitochondrial COI and nuclear Tpi genes.

The fall armyworm, Spodoptera frugiperda (J. E. Smith, 1797) (Lepidoptera: Noctuidae), is a significant global pest, that exhibits 2 discernible strains, corn strain (CS) and rice strain (RS). After initial detection in the eastern hemisphere in 2016, the dominant strain was identified as RS based only on cytochrome C oxidase subunit I (COI) mitochondrial gene from limited samples from various countries, including Thailand. This study aimed to assess strain and haplotype variation in the S. frugiperda populations in Thailand using both mitochondrial COI and nuclear triosephosphate isomerase (Tpi) genes. Analyses of COI sequences (n = 105) revealed 2 predominant haplotypes, COICSh4 (82.86%) and COIRSh1 (17.14%), and the analyses of Tpi sequences (n = 99) revealed 6 haplotypes, with TpiCa1a (53.53%) being the most prevalent. Of the 98 caterpillar samples, the majority exhibited true CS (83.67%) for both genes. Meanwhile, interstrain hybrids, indicated by gene discordance, accounted for the minority (16.33%). Interestingly, despite the initial dominance of RS during the 2018 outbreak, the current study identified CS as the prevalent strain across all localities in Thailand. These findings suggested a shift in S. frugiperda dynamics in Thailand that was possibly influenced by factors, such as competitive exclusion principle, pesticide usage in rice cultivation, and preferences for corn over rice. Our study suggests a need to reexamine the previous reports of rice-strain dominance in various countries in the eastern hemisphere after the initial invasion.

Occupational heat stress and its health impacts- an overview of research status and need for further research in Southeast Asia with special emphasis on mitigation strategies in North East India.

The Intergovernmental Panel on Climate Change, IPCC predicts that hot seasons will get even hotter due to global climate change. There exists a critical dependence of human metabolic processes on temperature. Changes in thermal balance therefore, have an adverse effect on health because they raise body temperature, cause excessive sweating, and accelerate the rate of dehydration. Different nations and professional groups use different techniques to measure heat strain. This paper aims to review previous research conducted in the area of heat strain due to heat exposure among workers in Southeast Asia and also to profile mitigation strategies in North East India. Studies conducted between the years 2011 to 2023 in the evaluation of the health impacts of occupational heat stress were searched systematically using several sources of databases like PubMed, Google Scholar, Science Direct, Web of Science, Scopus, etc. It was noted that a greater proportion of previous research on evaluating physiological effects was carried out in controlled environments as opposed to real-world field settings. While such studies give us valuable insights into the relationship, applying the same methodology in the workplace may not be feasible. In India, very few research has been carried out on workplace heat stress, and even fewer have been done in North East India using physiological indicators. North East India is also affected by global climate change leading top more hotter days than before. The region of Northeast India, particularly Guwahati (Assam), has recently seen extreme heat waves during the sweltering summer months. With less literature available in this geographical location, studies with actual field-based settings are much needed to understand the occupational health impacts in this region. This review can formulate a suitable methodology for assessing the health impacts in working environment. This can also help the local health professionals to recognize the heat strain parameters that are acceptable worldwide, and use as pertinent indicators to scrutinize worker's health and develop preventive agendas as climate change advances.

Loop-mediated isothermal amplification (LAMP) for detection of atypical enterovirus D68 strain VR-1197.

A method that has rapidly evolved for detection of viral pathogens are loop-mediated isothermal amplification (LAMP) assays. The available LAMP assays usually target the most common viral strains, including enteroviruses, but for the atypical enterovirus D68 strain VR-1197 this method has not yet been developed. Enterovirus D68 are known for severe respiratory distress in children, and atypical strains are less likely to be detected by traditional methods. This study targets the atypical EVD68 strain VR-1197 and have developed a rapid detection method saving time when differentiating enterovirus strains. This study present method development and review the sensitivity and specificity compared to traditional RT-qPCR, and wet lab cross reactivity with other airway pathogens. The EVD68 VR-1197 assay can be a rapid POC (Point of care) test for atypical EVD68 VR-1197 and have the potential as reliable detection method with minimal technological requirements.

Stability of Patient Social Determinants of Health With a Focus on Food Insecurity.

INTRODUCTION/OBJECTIVES: Many health systems screen patients for social determinants of health and refer patients with social needs to community service organizations for assistance. However, few studies have examined how social determinants of health change over time in the same individuals. METHODS: We examined patients screened by The MetroHealth System in Cleveland, Ohio for 11 social determinants of health, including food insecurity, financial strain, transportation, housing stability, utilities affordability, other housing problems, intimate partner violence, social connection, physical activity, daily stress, and digital connectivity. We determined changes in these social determinants among patients screened at baseline and again after 6 to 18 months of follow-up. We further examined correlates of changes in food insecurity, because it is a common need among our patients and leads to numerous referrals to community organizations for assistance. RESULTS: A substantial majority of patients had no change in each social determinant. For example, among 18 038 patients screened twice for food insecurity, 13 913 (77.1%) did not screen positive for food insecurity at baseline and follow-up and 1726 (9.6%) screened positive for food insecurity at both times. A total of 1080 (6.0%) did not screen positive for food insecurity at baseline but screened positive at follow-up while 1319 (7.3%) screened positive for food insecurity at baseline but not at follow-up. Among patients screening positive for food insecurity at baseline, screening negative at follow-up was independently associated with being age ≥60 years (odds ratio [OR] = 1.46, 95% confidence interval [CI] = 1.02-2.10), not screening positive for financial strain (OR = 1.64, CI = 1.27-2.13), not screening positive for housing problems (OR = 1.65, CI = 1.28-2.13), and not screening positive for intimate partner violence (OR = 1.45, OR = 1.02-2.08). A longer duration between baseline and follow-up screening was also independently associated with not screening positive for food insecurity at follow-up. Being referred for food assistance was not associated with absence of food insecurity at follow-up (OR = 0.71, CI = 0.47-1.08). CONCLUSIONS: Most patients report no change in specific social determinants of health over 6 to 18 months. Examining changes may identify subgroups at greatest risk for persistence of adverse determinants and help to evaluate the impact of assistance efforts.

Work-Related Strain, Sense of Coherence and Intercultural Sensitivity Among Mental Health Nurses in Qatar: A Cross-Sectional Study.

Migrant nurses face many challenges as they adapt and assimilate into their new working environments. The aim of this cross-sectional study was to investigate the perceptions of work-related strain, sense of coherence and intercultural sensitivity among nurses who were employed at a public mental health facility in Qatar. We used three self-report questionnaires: the work-related strain inventory, sense of coherence scale and an intercultural sensitivity scale. A cohort of 136 nurses voluntarily engaged in the study. The majority of participants were male, migrated from South Asia and were in their mid-30s. The study found that both sense of coherence and intercultural sensitivity were inversely proportional to work-related strain. Work-related strain was found to be lower than expected; the factors that appear to protect against work-related strain include longer clinical experience, a high sense of coherence, and intercultural sensitivity. Additionally, greater age and extended clinical experience, combined with a history of work in three or more countries, associated with higher scores on the sense of coherence scale. Lastly, being female, having a postgraduate degree and holding a senior-level position were associated with increased intercultural sensitivity. As nurses' migration across national and international borders increases in response to global demand, this study has important implications for nursing administrators, educators and policymakers in relation to the development and implementation of strategies to enhance nurses' sense of coherence and intercultural sensitivity and prevent work-related strain. Trial Registration number: NCT04196751.

Identifying Candida auris transmission in a hospital outbreak investigation using whole-genome sequencing and SNP phylogenetic analysis.

Candida auris poses a global public health challenge, causing multiple outbreaks within healthcare facilities. Despite advancements in strain typing for various infectious diseases, a consensus on the genetic relatedness threshold for identifying C. auris transmission in local hospital outbreaks remains elusive. We investigated genetic variations within our local isolate collection using whole-genome-based single nucleotide polymorphism (SNP) phylogenetic analysis. A total of 74 C. auris isolates were subjected to whole-genome sequencing (WGS) and SNP phylogenetic analysis via the QIAGEN CLC Genomics Workbench. Isolates included known related strains from the same patient, strains from different hospitals, strains from our hospital patients with no epidemiological link, and 19 patient isolates from a recent C. auris outbreak. All but three isolates were identified to be Clade IV. By examining the genetic diversities of C. auris within patients and between patients, we identified a SNP variation range of 0-13 for identifying related isolates. During an outbreak investigation, utilizing this range, maximum likelihood phylogenetic analysis revealed two distinct clusters that aligned with the epidemiological links. Determining a SNP variation range to delineate genetic relatedness among isolates is crucial for the application of WGS and SNP phylogenetic analysis in identifying C. auris transmission during hospital outbreak investigations. The use of WGS SNP phylogenetic analysis via the CLC Genomics Workbench has emerged as a valuable method for typing C. auris in clinical microbiology laboratories.

The association between leisure-time physical activity and cardiorespiratory and muscular fitness and job strain-Study with a Northern Finland birth cohort of 1966.

Job strain is a major concern in the workplace. Work-related stress is an increasing challenge worldwide as it is the leading cause of long-term sickness absences, disability pensions and lower productivity. Rarely studied simultaneously, both leisure-time physical activity (LTPA) and physical fitness (PF), which comprises cardiorespiratory fitness (CRF) and muscular fitness (MF), may have potential in preventing and managing job strain. The current study aimed to investigate whether LTPA, CRF and MF predict perceived job strain. In addition, the study examines reverse associations, that is, whether job strain predicts LTPA, CRF and MF. We used longitudinal population-based data from a Northern Finland birth cohort of 1966 (n = 5363) to analyse LTPA, CRF and MF as well as job strain and its components, job demands and job control, at age 31 years (1997) and 46 years (2012). Leisure-time physical activity was measured with a self-reported questionnaire whereas CRF and MF were measured as part of clinical examination. Linear regression analyses were used to analyse the data. In both men (n = 2548) and women (n = 2815), higher baseline MF predicted lower job strain and job demands 15 years later. In women, higher baseline total LTPA predicted higher job demands, whereas in men, higher CRF predicted lower job strain and higher job control. These associations remained significant, also when adjusted for education and occupational status. In the analyses on reverse associations, higher job control and higher job demands were linked to higher leisure-time moderate-to-vigorous physical activity (MVPA) and total LTPA 15 years later among both men and women, except for the association between job demands and total LTPA among women. These associations remained significant after adjustment for education and occupational status, except for the association of job control with MVPA and total LTPA among men. The association of higher job demands and total LTPA became significant in women. We conclude that LTPA and PF seem beneficial in preventing and managing job strain.

Association of left atrial function with frailty: The Atherosclerosis Risk in Communities (ARIC) study.

BACKGROUND: Frailty is common in people with cardiovascular disease. Worse left atrial (LA) function is an independent risk factor for cardiovascular disease. However, whether worse LA function is associated with frailty is unclear. METHODS: We included 3292 older adults from the Atherosclerosis Risk in Communities study who were non-frail at baseline (visit 5, 2011-2013) and had LA function (reservoir, conduit, and contractile strain) measured from two-dimensional speckle-tracking echocardiography. LA stiffness index was calculated as a ratio of E/e' to LA reservoir strain. Frailty was defined using the validated Fried frailty phenotype. Incident frailty was assessed between 2016 and 2019 during two follow-up visits. LA function was analyzed as quintiles. Multivariable logistic regression examined odds of incident frailty. RESULTS: Median (interquartile range [IQR]) age was 74 (71-77) years, 58% were female, and 214 (7%) participants developed frailty during a median (IQR) follow-up of 6.3 (5.6-6.8) years. After adjusting for baseline confounders and incident cardiovascular events during follow-up, the odds of developing frailty was 2.42 (1.26-4.66) times greater among participants in the lowest (vs highest) quintile of LA reservoir strain and 2.41 (1.11-5.22) times greater among those in the highest (vs lowest) quintile of LA stiffness index. Worse LA function was significantly associated with the development of exhaustion, but not the other components of the Fried frailty phenotype. CONCLUSIONS: Worse LA function is associated with higher incidence of frailty and exhaustion component independent of LA size and left ventricular function. Future studies are needed to elucidate the underlying mechanisms that drive the observed association.

[Determining the risk of maladaptation using an electroencephalogram to prevent mental strain]. / Opredelenie riska dezadaptatsii po elektroentsefalogramme dlya preduprezhdeniya psikhicheskogo perenapryazheniya.

OBJECTIVE: To identify criteria for electroencephalogram (EEG) synchronization in patients with post-traumatic stress disorder (PTSD) exhibiting high levels of functional stress and signs of maladaptation. MATERIAL AND METHODS: Two groups of male subjects aged 23-38 years were examined: a group of subjects receiving therapy for PTSD at a medical center; and a group of healthy subjects who regularly practiced psychophysical relaxation sessions. EEG, an innovative method for analyzing brain synchronizing currents, and the Spielberger State-Trait Anxiety Inventory were used. RESULTS: Criteria for the formation of patterns of synchronization of neural networks were found in subjects of the therapy group, who have a high level of psychofunctional stress and signs of maladaptation against the background of PTSD in combination with severe anxiety and impaired cognitive abilities. CONCLUSION: Alpha wave synchronization analysis can be used to more accurately diagnose the level of psychofunctional stress in individuals at risk of developing psychophysical disorders. The results of the work suggest the use of technologies that increase the ability to synchronize brain biocurrents to develop programs for correcting psychophysical status, such as relaxation exercises.

Myocardial Strain Imaging: Theory, Current Practice, and the Future.

Myocardial strain imaging by echocardiography or cardiac magnetic resonance (CMR) is a powerful method to diagnose cardiac disease. Strain imaging provides measures of myocardial shortening, thickening, and lengthening and can be applied to any cardiac chamber. Left ventricular (LV) global longitudinal strain by speckle-tracking echocardiography is the most widely used clinical strain parameter. Several CMR-based modalities are available and are ready to be implemented clinically. Clinical applications of strain include global longitudinal strain as a more sensitive method than ejection fraction for diagnosing mild systolic dysfunction. This applies to patients suspected of having heart failure with normal LV ejection fraction, to early systolic dysfunction in valvular disease, and when monitoring myocardial function during cancer chemotherapy. Segmental LV strain maps provide diagnostic clues in specific cardiomyopathies, when evaluating LV dyssynchrony and ischemic dysfunction. Strain imaging is a promising modality to quantify right ventricular function. Left atrial strain may be used to evaluate LV diastolic function and filling pressure.

Prediction strategy for screening functional Haloarchaea strains with qPCR assays.

As an extremophile resource, functional Haloarchaea strains are extremely time-consuming to screen. Here, taking the screening of low-salt-tolerant strains as an example, based on the qPCR assays that shortened time by 4-7 times and achieved 100 % accuracy, a universal strategy for rapid and accurate screening of functional Haloarchaea strains was established.

Data-Driven Strain Sensor Design Based on a Knowledge Graph Framework.

Wearable flexible strain sensors require different performance depending on the application scenario. However, developing strain sensors based solely on experiments is time-consuming and often produces suboptimal results. This study utilized sensor knowledge to reduce knowledge redundancy and explore designs. A framework combining knowledge graphs and graph representational learning methods was proposed to identify targeted performance, decipher hidden information, and discover new designs. Unlike process-parameter-based machine learning methods, it used the relationship as semantic features to improve prediction precision (up to 0.81). Based on the proposed framework, a strain sensor was designed and tested, demonstrating a wide strain range (300%) and closely matching predicted performance. This predicted sensor performance outperforms similar materials. Overall, the present work is favorable to design constraints and paves the way for the long-awaited implementation of text-mining-based knowledge management for sensor systems, which will facilitate the intelligent sensor design process.

Study on Temperature Response of Rubberized Concrete Pavement Based on Fiber Bragg Grating Testing Technology.

The temperature response of pavement is not only crucial for assessing the internal stresses within pavement structures but is also an essential parameter in pavement design. Investigating the temperature response of rubberized concrete pavements (RCP) can support the construction of large-scale rubber concrete pavements. This study constructed a pavement monitoring system based on fiber Bragg grating technology to investigate the temperature distribution, temperature strain, temperature effects, and temperature stress of RCP. The results show that the daily temperature-time history curves of concrete pavement exhibit a significant asymmetry, with the heating phase accounting for only one-third of the curve. The temperature at the middle of RCP is 1.8 °C higher than that of ordinary concrete pavement (OCP). The temperature distribution along the thickness of the pavement follows a "spindle-shaped" pattern, with higher temperatures in the center and lower temperatures at the ends. Additionally, the addition of rubber aggregates increases the temperature strain in the pavements, makes the temperature-strain hysteresis effect more pronounced, and increases the curvature of the pavement slab. However, the daily stress range at the bottom of RCP is approximately 0.7 times that of OCP.

Assessment of the Film-Free Water Decal Method for Speckle Pattern Application in Digital Image Correlation.

Digital Image Correlation (DIC) often encounters challenges with variability and consistency in traditional speckle pattern application techniques, such as spray-painting, affecting measurement accuracy and reliability. This study evaluates a film-free water decal method as an alternative for applying speckle patterns in DIC. SS275 structural steel specimens were prepared with speckle patterns using both the film-free water decal method and traditional spray-painting. The quality of the speckle patterns was assessed, and their effectiveness for DIC was evaluated through tensile testing and a comparison with strain gauge measurements. The film-free water decal method provided enhanced control over speckle pattern application, resulting in high-quality, consistent patterns. Strain measurements obtained using this method closely matched those from traditional methods, confirming its reliability. The film-free water decal method offers a practical and reliable alternative to spray-painting, improving the consistency and accuracy of DIC experiments, with potential applications in various engineering and scientific fields.

Facile One-Pot Preparation of Polypyrrole-Incorporated Conductive Hydrogels for Human Motion Sensing.

Conductive hydrogels have been widely used in soft robotics, as well as skin-attached and implantable bioelectronic devices. Among the candidates of conductive fillers, conductive polymers have become popular due to their intrinsic conductivity, high biocompatibility, and mechanical flexibility. However, it is still a challenge to construct conductive polymer-incorporated hydrogels with a good performance using a facile method. Herein, we present a simple method for the one-pot preparation of conductive polymer-incorporated hydrogels involving rapid photocuring of the hydrogel template followed by slow in situ polymerization of pyrrole. Due to the use of a milder oxidant, hydrogen peroxide, for polypyrrole synthesis, the photocuring of the hydrogel template and the growing of polypyrrole proceeded in an orderly manner, making it possible to prepare conductive polymer-incorporated hydrogels in one pot. The preparation process is facile and extensible. Moreover, the obtained hydrogels exhibit a series of properties suitable for biomedical strain sensors, including good conductivity (2.49 mS/cm), high stretchability (>200%), and a low Young's modulus (~30 kPa) that is compatible with human skin.

Research on Spatiotemporal Continuous Information Perception of Overburden Compression-Tensile Strain Transition Zone during Mining and Integrated Safety Guarantee System.

The mining of deep underground coal seams induces the movement, failure, and collapse of the overlying rock-soil body, and the development of this damaging effect on the surface causes ground fissures and ground subsidence on the surface. To ensure safety throughout the life cycle of the mine, fully distributed, real-time, and continuous sensing and early warning is essential. However, due to mining being a dynamic process with time and space, the overburden movement and collapse induced by mining activities often have a time lag effect. Therefore, how to find a new way to resolve the issue of the existing discontinuous monitoring technology of overburden deformation, obtain the spatiotemporal continuous information of the overlying strata above the coal seam in real time and accurately, and clarify the whole process of deformation in the compression-tensile strain transition zone of overburden has become a key breakthrough in the investigation of overburden deformation mechanism and mining subsidence. On this basis, firstly, the advantages and disadvantages of in situ observation technology of mine rock-soil body were compared and analyzed from the five levels of survey, remote sensing, testing, exploration, and monitoring, and a deformation and failure perception technology based on spatiotemporal continuity was proposed. Secondly, the evolution characteristics and deformation failure mechanism of the compression-tensile strain transition zone of overburden were summarized from three aspects: the typical mode of deformation and collapse of overlying rock-soil body, the key controlling factors of deformation and failure in the overburden compression-tensile strain transition zone, and the stability evaluation of overburden based on reliability theory. Finally, the spatiotemporal continuous perception technology of overburden deformation based on DFOS is introduced in detail, and an integrated coal seam mining overburden safety guarantee system is proposed. The results of the research can provide an important evaluation basis for the design of mining intensity, emergency decisions, and disposal of risks, and they can also give important guidance for the assessment of ground geological and ecological restoration and management caused by underground coal mining.

The Biological Characteristics of Mycobacterium Phage Henu3 and the Fitness Cost Associated with Its Resistant Strains.

Tuberculosis (TB), caused by Mycobacterium tuberculosis, is an infectious disease that seriously affects human life and health. Despite centuries of efforts to control it, in recent years, the emergence of multidrug-resistant bacterial pathogens of M. tuberculosis due to various factors has exacerbated the disease, posing a serious threat to global health. Therefore, a new method to control M. tuberculosis is urgently needed. Phages, viruses that specifically infect bacteria, have emerged as potential biocontrol agents for bacterial pathogens due to their host specificity. In this study, a mycobacterium phage, Henu3, was isolated from soil around a hospital. The particle morphology, biological characteristics, genomics and phylogeny of Henu3 were characterized. Additionally, to explore the balance between phage resistance and stress response, phage Henu3-resistant strains 0G10 and 2E1 were screened by sequence passage and bidirectional validation methods, which significantly improved the sensitivity of phage to antibiotics (cefotaxime and kanamycin). By whole-genome re-sequencing of strains 0G10 and 2E1, 12 genes involved in cell-wall synthesis, transporter-encoded genes, two-component regulatory proteins and transcriptional regulatory factor-encoded genes were found to have mutations. These results suggest that phage Henu3 has the potential to control M. tuberculosis pathogens, and phage Henu3 has the potential to be a new potential solution for the treatment of M. tuberculosis infection.

The influence of selected grain size fractions of coal fly ash on properties of clay-cement mortars used for the flood levees construction.

This study examines the influence of different grain size fractions of coal fly ash on the properties of clay-cement mortars used in flood levee construction. Dry aerodynamic separation and mesh sieving were used to obtain ultrafine, fine, and medium fractions of high-calcium and silica fly ash. The experimental results reveal that the rheological properties of fresh mortars are significantly influenced by these fractions. High-calcium fly ash mortars exhibit high reactivity and rapid increase in viscosity, with finer fractions showing the highest reactivity. Silica ashes show increased reactivity in the later stages of suspension hardening. Their spherical shape contributes to reducing internal friction during flow in initial technological operations. Furthermore, the compressive strength of hardened mortars improves as the particle size decreases for both ashes, resulting in a dense and uniform microstructure. The separation and fractionation of fly ashes contribute to the obtaining of fractions that influence the parameters of clay-cement suspension application on different scales. The results show the potential benefits of ash separation, which can bring advantages in terms of economic viability, engineering performance, and ecological sustainability.

Experimental and numerical investigation of waterjet interaction with liver in connection with surgical technique.

Hepatectomy, or liver resection, is a process by which through surgery part or all of the liver is removed. In this operation, less bleeding, negligible damage and fast removal are the most important requirements. Surgery through waterjet is one of the most efficient techniques which is widely used in hepatectomy. Some clinical studies are conducted to investigate waterjet method in liver resection. In the present study interaction of waterjet with liver during the process of the surgery is investigated in terms of mechanical engineering. For this purpose, a system of waterjet is designed to consider the interaction of waterjet with liver at different nozzle diameter and velocities. For validation, SPH-FEM model is used to analyze waterjet interaction with hyperelastic liver. In this model, liver cutting is simulated using element deletion defined by a subroutine code based on maximum principal strain criterion. Depth of cut along with degraded volume are measured experimentally and compared with simulated method. Results show that good agreement exists between experimental and simulation finding. By comparing depth of cut in the experimental and simulation results, it can be seen that liver behavior changes from brittle to ductile by increasing waterjet velocity during the experimental tests. For the simulation, maximum principal strain threshold is set to be between 0.1 and 0.4. However, the best agreement between experimental and simulation results exists at maximum principal strain threshold equal to 0.2. The findings can help surgeons to find the best working range of waterjet device and the most efficient operation.

Chronic mastitis manifest as complex breast cyst in ultrasound and the role of elastography: A case series.

This case series aims to describe the clinical presentation of mastitis, the conventional sonography and elastography findings, and histopathological features in the diagnosis of chronic mastitis. We present 3 cases of breast swelling in young ladies with one of the cases is related to breastfeeding with similar imaging appearance of complex breast cyst and the histopathology finding of chronic mastitis. We will describe the role of elastography in evaluating and differentiating the benign and malignant complex breast cyst.