RESUMO
In response to the environmental impacts of conventional polyurethane adhesives derived from fossil fuels, this study introduces a sustainable alternative utilizing lignin-based polyols extracted from rice straw through a process developed at INESCOP. This research explores the partial substitution of traditional polyols with lignin-based equivalents in the synthesis of reactive hot melt polyurethane adhesives (HMPUR) for the footwear industry. The performance of these eco-friendly adhesives was rigorously assessed through Thermogravimetric Analysis (TGA), Differential Scanning Calorimetry (DSC), rheological analysis, and T-peel tests to ensure their compliance with relevant industry standards. Preliminary results demonstrate that lignin-based polyols can effectively replace a significant portion of fossil-derived polyols, maintaining essential adhesive properties and marking a significant step towards more sustainable adhesive solutions. This study not only highlights the potential of lignin in the realm of sustainable adhesive production but also emphasises the valorisation of agricultural by-products, thus aligning with the principles of green chemistry and sustainability objectives in the polymer industry.
RESUMO
Graphene quantum dots (GQDs) are a novel carbon nanomaterial from the graphene family due to their unique physicochemical properties and diverse range of applications. However, in terms of the sustainable utility of GQDs, their synthesis methods are the main roadblock because of their high production costs and the release of toxic byproducts during the production processes. Thus, the search for sustainable and economical fabrication methods for preparing GQDs is one of the most essential areas of research for their practical applications. In this context, lignocellulosic biomass (LCB) wastes are a prime choice for the fabrication of GQDs due to their high carbon and cellulose content, which are favorable for being employed as precursors and reducing agents Additionally, LCBs are a prime source of potential bioenergy production, which is currently a key research hotspot to combat environmental pollution, global warming, and energy crises. Therefore, the present review provides feasibility for sustainable and environmentally friendly fabrication of GQDs using LCB wastes for their possible utility in cellulosic biofuel production technology improvement. Furthermore, the prospective of using these GQDs as catalysts in bioenergy production for the development of low-cost biomass-based biofuel production technology has been discussed along with the existing limitations and their sustainable recommendation.
RESUMO
Over the past few years, earth-abundant transition metal-catalyzed hydrosilylation has emerged as an ideal strategy for the synthesis of organosilanes. The success in this area of research has expanded to the advancements of alkyne dihydrosilylation reactions, offering broadened synthetic applications through the selective installation of two silyl groups. In particular, catalysts based on Fe, Co, and Ni have engendered enabling platforms for mild transformations with a range of distinct regioselectivity. This mini-review summarizes recent advances in this research field, highlighting the unique features of each system from both synthetic and mechanistic perspectives.
RESUMO
This report detailed the synthesis of multi-substituted pyrazoles through the acceptorless dehydrogenative coupling (ADC) reaction catalyzed by a well-defined manganese(I)-pincer complex. Symmetrically substituted pyrazoles were synthesized by reacting 1,3-diols with hydrazines. Unsymmetrically substituted pyrazoles were selectively made via the ADC of primary alcohols with methyl hydrazones. Water and hydrogen are liberated as the green byproducts. The endurance of these methodologies has been presented by producing 30 substrates with varied functionalities. Model reactions were scaled up to demonstrate practicability. The reaction rate and order were measured to transparent the involvement of the reagents during catalysis. Control experiments elucidated the plausible reaction mechanisms.
RESUMO
Biological approaches via biomolecular extracts of bacteria, fungi, or plants have recently been introduced as an alternative approach to synthesizing less or nontoxic nanomaterials, compared to conventional physical and chemical approaches. Among these biological methods, plant-mediated approaches (phytosynthesis) are reported to be highly beneficial for large-scale, nontoxic nanomaterial synthesis. However, plant-mediated synthesis of nanomaterials using native plant extract can lead to bioprospecting issues and deforestation challenges. On the other hand, non-native or invasive plants are non-indigenous to a particular geographic location that can grow and spread rapidly, ultimately disrupting the local and endogenous plant communities or ecosystems. Thus, controlling or eradicating these non-native plants before they damage the ecosystem is necessary. Even though mechanical, chemical, and biological approaches are available to control non-native plants, all these methods possess certain limitations, such as environmental toxicity, disturbance in the nutrient cycle, and loss of genetic integrity. Therefore, non-native plants were recently proposed as a novel sustainable source of phytochemicals for preparing nanomaterials via green chemistry, mainly metallic nanoparticles, as an alternative to native, agriculture-based, or medicinal plants. This work aims to cover a literature gap on plant-mediated bionanomaterial synthesis with an overview and bibliography analysis of non-native plants via novel data mining and advanced visualization tools. In addition, the potential of non-native plants as a sustainable, green chemistry-based alternative for bionanomaterial preparation for maintaining ecological balance, the mechanism of formation via phytochemicals, and their possible applications to promote their control and spread were also discussed. The bibliography analysis revealed that only an average of 4 articles have been published in the last 10 years (2013-2023) on non-native/invasive plants for nanomaterial synthesis, which shows the significance of this article.
Assuntos
Extratos Vegetais , Extratos Vegetais/química , Nanoestruturas , Ecossistema , Química VerdeRESUMO
Chalcones are polyphenols that belong to the flavonoids family, known for their broad pharmacological properties. They have thus attracted the attention of chemists for their obtention and potential activities. In our study, a library of compounds from 2'-hydroxychalcone's family was first synthesized. A one-step mechanochemical synthesis via Claisen-Schmidt condensation reaction under ball mill conditions was studied, first in a model reaction between a 5'-fluoro-2'-hydroxyacetophenone and 3,4-dimethoxybenzaldehyde. The reaction was optimized in terms of catalysts, ratio of reagents, reaction time, and influence of additives. Among all assays, we retained the best one, which gave the highest yield of 96% when operating in the presence of 1 + 1 eq. of substituted benzaldehyde and 2 eq. of KOH under two grinding cycles of 30 min. Thus, this protocol was adopted for the synthesis of the selected library of 2'-hydroxychalcones derivatives. The biological activities of 17 compounds were then assessed against Plasmodium falciparum, Leishmania donovani parasite development, as well as IGR-39 melanoma cell lines by inhibiting their viability and proliferation. Compounds 6 and 11 are the most potent against L. donovani, exhibiting IC50 values of 2.33 µM and 2.82 µM, respectively, better than the reference drug Miltefosine (3.66 µM). Compound 15 presented the most interesting antimalarial activity against the 3D7 strain, with IC50 = 3.21 µM. Finally, chalcone 12 gave the best result against IGR-39 melanoma cell lines, with an IC50 value of 12 µM better than the reference drug Dacarbazine (IC50 = 25 µM).
Assuntos
Chalconas , Plasmodium falciparum , Chalconas/farmacologia , Chalconas/química , Chalconas/síntese química , Humanos , Linhagem Celular Tumoral , Plasmodium falciparum/efeitos dos fármacos , Leishmania donovani/efeitos dos fármacos , Leishmania donovani/crescimento & desenvolvimento , Antimaláricos/farmacologia , Antimaláricos/síntese química , Antimaláricos/química , Antineoplásicos/farmacologia , Antineoplásicos/síntese química , Antineoplásicos/química , Proliferação de Células/efeitos dos fármacos , Sobrevivência Celular/efeitos dos fármacos , Estrutura MolecularRESUMO
In this study, we utilized a navel hybrid material, prepared by fusing fluorescent Carbon Dots SyCDs, derived from syrup bottles, with curcumin. This innovative approach not only offers significant advancements in antimicrobial activity and bioimaging but also represents a stride in sustainable and eco-friendly nanotechnology. The core of our study is the development of an efficient, cost-effective, and environmentally conscious method for synthesizing SyCDs. This is achieved by repurposing waste syrup bottles, thus addressing the pressing issue of plastic waste. The incorporation of curcumin, renowned for its biological properties, enhances the luminescent characteristics of SyCDs and augments their functionality. This combination overcomes the inherent limitations of curcumin when used in isolation. The hybrid material exhibits enhanced antimicrobial properties and proves to be a potent alternative to conventional fluorescent dyes for bioimaging, marking a substantial leap in the field of sustainable nanomaterials. Our work not only demonstrates the versatile applications of luminescent SyCDs in health and environmental science but also underscores the potential of sustainable approaches in addressing global environmental challenges. This study, represents a significant contribution to the domain of sustainable nanotechnology, highlighting the transformative power of integrating waste management with advanced material science.
Assuntos
Anti-Infecciosos , Curcumina , Pontos Quânticos , Curcumina/farmacologia , Anti-Infecciosos/farmacologia , Carbono , Estado de Consciência , Corantes FluorescentesRESUMO
Zeolitic imidazolate frameworks (ZIFs) are widely used MOFs because of certain characteristics, but also because they can be prepared at room temperature using water as the unique solvent. However, these a priori sustainable conditions inevitably entail a huge and somehow unusable excess of linker. Here, we present the formation of ZIFs at room temperature in water, starting from mixtures with a linker/metal ratio of two, that is, coinciding with the stoichiometry found in the final MOFs, in the presence of amines. ZIF-8 can be prepared with triethylamine (TEA), giving a yield of Zn of 96.6%. Other bases, like NaOH, tetraethylammonium hydroxide or ammonium hydroxide, do not lead to ZIF-8 under the same conditions. The so-obtained ZIF-8 contains TEA inside its cavities, making it less porous than its conventionally prepared counterparts. Amine can be removed by mild thermal treatments (200-250 °C). Such thermal treatments induce the generation of g-C3N4-like species which could give added value to these materials as potential photocatalysts, increasing their affinity to CO2, as proved in this work. This methodology can be successfully extended to other amines, like N,N-dicyclohexylmethylamine, as well as to other prepared ZIFs, like Co-based ZIF-67, isostructural to ZIF-8.
RESUMO
This study outlines the synthesis of biogenic copper oxide nanoparticles (CuONPs) using an extract derived from Cassia fistula Linn (Cf) leaves through a green synthesis approach. Characterization of the synthesized CfBio-CuONPs was carried out using UV- VIS, FTIR, DLS, XRD, and TEM studies. The CfBio-CuONPs exhibited a prominent peak at 272 nm in UV-VIS spectroscopy, and XRD measurements confirmed their crystalline nature. The FTIR spectrum of CfBio-CuONPs revealed the presence of functional groups such as O-H and aromatic groups. TEM analysis confirmed that the CfBio-CuONPs were predominantly spherical with diameters ranging from 15 to 25 nm. Subsequently, the antibacterial potential of CfBio-CuONPs was evaluated against four pathogenic bacteria, including Escherichia coli, Pseudomonas aeruginosa, Staphylococcus epidermidis, and Bacillus subtilis. Among these, B. subtilis exhibited the highest zone of inhibition (26.93 ± 2.01 mm), followed by E. coli (24.25 ± 1.04 mm), P. aeruginosa (23.98 ± 0.97 mm), and S. epidermidis (22.97 ± 1.20 mm). CfBio-CuONPs demonstrated maximum antioxidant activity (78 ± 1.54%) at a dose-dependent concentration of 2000 µg/ml. Furthermore, in vitro toxicity assessment using the toxtrak test indicated that CfBio-CuONPs exhibited a significantly stronger toxic effect value/PI against E. coli (93.52%) compared to P. aeruginosa (92.65%), B. subtilis (91.25%), and S. epidermidis (82.89%). These results underscore the notable toxicity of CfBio-CuONPs against E. coli, surpassing that against other bacteria and conventional antibiotics. This study highlights the potential utility of CfBio-CuONPs for eradicating pathogenic microorganisms and suggests potential implications for ecotoxicology. Supplementary Information: The online version contains supplementary material available at 10.1007/s13205-023-03869-5.
RESUMO
Pharmaceuticals such as salicylic acid are commonly detected in wastewater and surface waters, increasing concern for possible harmful effects on humans and the environment. Their difficult removal via conventional treatments raised the need for improved strategies, among which the development of bioderived adsorbents gained interest because of their sustainability and circularity. In this work, biobased cross-linked adsorbents, synthesized via a sustainable approach from starch derivatives, namely beta-cyclodextrins and maltodextrins, were at first characterized via FTIR-ATR, TGA, SEM, and elemental analysis, showing hydrophilic granular morphologies endowed with specific interaction sites and thermal stabilities higher than 300 °C. Subsequently, adsorption tests were carried out, aiming to assess the capabilities of such polymers on the removal of salicylic acid, as a case study, from water. Batch tests showed rapid kinetics of adsorption with a removal of salicylic acid higher than 90% and a maximum adsorption capacity of 17 mg/g. Accordingly, continuous fixed bed adsorption tests confirmed the good interaction between the polymers and salicylic acid, while the recycling of the adsorbents was successfully performed up to four cycles of use.
RESUMO
Classical Crabbé type SN 2' substitutions of propargylic substrates has served as one of the standard methods for the synthesis of allenes. However, the stereospecific version of this transformation often requires either stoichiometric amounts of organocopper reagents or special functional groups on the substrates, and the chirality transfer efficiency is also capricious. Herein, we report a sustainable methodology for the synthesis of diverse 1,3-di and tri-substituted allenes by using a simple and cheap cellulose supported heterogeneous nanocopper catalyst (MCC-Amp-Cu(I/II)). This approach represents the first example of heterogeneous catalysis for the synthesis of chiral allenes. High yields and excellent enantiospecificity (up to 97 % yield, 99 % ee) were achieved for a wide range of di- and tri-substituted allenes bearing various functional groups. It is worth noting that the applied heterogeneous catalyst could be recycled at least 5â times without any reduced reactivity. To demonstrate the synthetic utility of the developed protocol, we have applied it to the total synthesis of several chiral allenic natural products.
RESUMO
There is a growing demand for the synthesis of high surface area carbons, also known as carbon nanoparticles (CNPs). Existing synthesis methods for high surface area carbons have limited environmental benignity and economic viability due to the requirement of multistep and batch processes and harsh activating and/or templating chemicals. Herein, we demonstrate the synthesis of high surface area CNPs from lignin, a waste byproduct, through a single-step, continuous gas phase aerosol technique without the use of activating or templating chemicals. This continuous approach requires significantly less time for synthesis: on the order of seconds in comparison to hours for conventional methods. Properties of carbon materials synthesized from lignin are controlled by temperature and residence time, and the role of these parameters inside the aerosol reactor on carbon nanoparticle size, morphology, molecular structure, and surface area is systematically investigated. Furthermore, the as-obtained carbon nanoparticles are tested for specific capacitance, and the best-performing material (surface area 925 m2/g) exhibited a specific capacitance of 247 F/g at 0.5 A/g with excellent capacity retainment of over 98% after 10,000 cycles. This is a clear demonstration of their superior performance compared with supercapacitors synthesized earlier from lignin. Overall, the simple (single-step, continuous, and rapid) operation and the avoidance of the use of activating/templating chemicals make the aerosol technique a promising candidate for the scalable and sustainable synthesis of CNPs from lignin.
RESUMO
Electroorganic synthesis is generally considered to be a green alternative to conventional redox reactions. Electrochemical reductions, however, are less advantageous in terms of sustainability, as sacrificial metal anodes are often employed. Divided cell operation avoids contact of the reduction products with the anode and allows for convenient solvent oxidation, enabling metal free greener electrochemical reductions. However, the ion exchange membranes required for divided cell operation on a commercial scale are not amenable to organic solvents, which hinders their applicability. Herein, we demonstrate that electrochemical reduction of oxidatively sensitive compounds can be carried out in an undivided cell without sacrificial metal anodes by controlling the mass transport to a small surface area electrode. The concept is showcased by an electrochemical method for the reductive cleavage of aryl disulfides. Fine tuning of the electrode surface area and current density has enabled the preparation of a wide variety of thiols without formation of any oxidation side products. This strategy is anticipated to encourage further research on greener, metal free electrochemical reductions.
RESUMO
Hydrazone compounds represent an important area of research that includes, among others, synthetic approaches and biological studies. A series of 17 hydrazones have been synthesized by mechanochemical means. The fragments chosen were phenolic and furanyl aldehydes coupled with 12 heterocyclic hydrazines or hydrazinamides. All compounds can be obtained quantitatively when operating on a planetary ball mill and a maximum reaction time of 180 min (6 cycles of 30 min each). Complete spectroscopic analyses of hydrazones revealed eight compounds (3-5, 8-11, 16) present in one geometric form, six compounds (1, 2, 13-15) present in two isomeric forms, and three compounds (6, 7, 12) where one rotation is restricted giving rise to two different forms. The single crystal X-ray structure of one of the hydrazones bearing the isoniazid fragment (8) indicates a crystal lattice consisting of two symmetry-independent molecules with different geometries. All compounds obtained were tested for anti-infectious and antibacterial activities. Four compounds (1, 3, 5 and 8) showed good activity against Mycobacterium tuberculosis, and one (7) was very potent against Staphylococcus aureus. Most interesting, this series of compounds displayed very promising antileishmanial activity. Among all, compound 9 exhibited an IC50 value of 0.3 µM on the Leishmania donovani intramacrophage amastigote in vitro model and a good selectivity index, better than miltefosine, making it worth evaluating in vivo.
Assuntos
Antiprotozoários , Hidrazonas , Hidrazonas/farmacologia , Hidrazonas/química , Aldeídos , Amidas , Hidrazinas , Antibacterianos/farmacologia , Antiprotozoários/farmacologia , Antiprotozoários/química , Relação Estrutura-AtividadeRESUMO
Harnessing visible-light in organic synthesis is one of the most effective methods that aligns with green and sustainable chemistry principles and hence skyrocketed in the last two decades. Similarly, three-component 1,2-dicarbofunctionalization of alkenes and alkynes has recently been a great choice to construct complex molecular systems in an easy and rapid manner. Therefore, light-induced reactions can be an excellent alternative to carry out 1,2-dicarbofunctionalization reactions, and very recently, organic chemists across the globe have fascinated us with their interesting articles. In this present review, we have summarized the recent advancements in the area of visible light induced three-component 1,2-dicarbofunctionalization of alkenes and alkynes till March 2023. We have categorized the discussion based on the catalysts used to carry out the transformations for better understanding and different important aspects of these transformations have also been covered.
RESUMO
Here, we report a general approach to the synthesis of the difluoroalkyl bicycloalkanes (CF2 -BCAs), as structural surrogates of aryl ketones and ethers. The chemistry is driven by a dihydrobenzoacridine photocatalyst, that engages in a catalytic electron-donor acceptor (EDA) complex, or directly reduces the fluorinated substrate. These two convergent manifolds lead to the generation of the R-CF2 radical, that reacts with the [1.1.1]- or [3.1.1.]-propellane. The method is extremely general, and extendable to complex bioactive molecules (30 examples, up to 87 % yield). The structural features of the CF2 -BCP hybrid bioisostere were investigated by single crystal X-ray. Finally, we synthesised a CF2 -BCP analogue of a Leukotriene A4 hydrolase inhibitor, replacing the original aryl ether motif. In silico docking studies indicated that this new analogue maintains the same arrangement within the enzyme pocket, profiling the use of the CF2 -BCA hybrid bioisostere in medicinal chemistry settings.
RESUMO
Recent advances in the environmentally benign synthesis of aromatic N-heterocycles are reviewed, focusing primarily on the application of catalytic methods and non-traditional activation. This account features two main parts: the preparation of single ring N-heterocycles, and their condensed analogs. Both groups include compounds with one, two and more N-atoms. Due to the large number of protocols, this account focuses on providing representative examples to feature the available methods.
RESUMO
The [1,2,3]-triazolo [1,5-a] quinoxalin-4(5H)-one scaffold and its analogues triazole-fused heterocyclic compounds are relevant structural templates in both natural and synthetic biologically active compounds. However, their medicinal chemistry applications are often limited due to the lack of synthetic protocols combining straightforward generation of the central core while also allowing extensive decoration activity for drug discovery purposes. Herein, we report a "refreshed" synthesis of the [1,2,3]-triazolo [1,5-a]quinoxalin-4(5H)-one core, encompassing the use of eco-compatible catalysts and reaction conditions. We have also performed a sustainable and extensive derivatization campaign at both the endocyclic amide nitrogen and the ester functionality, comprehensively exploring the reaction scope and overcoming some of the previously reported difficulties in introducing functional groups on this structural template. Finally, we unveiled a preliminary biological investigation for the newly generated chemical entities. Our assessment of the compounds on different bacterial species (two S. aureus strains, three P. aeruginosa strains, K. pneumonia), and two fungal C. albicans strains, as well as the evaluation of their activity on S. epidermidis biofilm formation, foster further optimization for the retrieved hit compounds 9, 14, and 20.
RESUMO
Silver nanoparticles are usually prepared by the reduction of silver cations through chemical and non-sustainable procedures that involve the use of reducing chemical agents. Therefore, many efforts have been made in the search for sustainable alternative methods. Among them, an ultrasound-assisted procedure could be a suitable and sustainable method to afford well-dispersed and nanometric silver particles. This paper describes a sustainable, ultrasound-assisted method using citrate as a reducing agent to prepare silver@hydroxyapatite functionalized calcium carbonate composites. For comparison, an ultrasound-assisted reduction was performed in the presence of NaBH4. The composites obtained in the presence of these two different reducing agents were compared in terms of nanoparticle nature, antimicrobial activity, and cytotoxic activity. The nanoparticle nature was investigated by several techniques, including X-ray powder diffraction, field-emission scanning electron microscopy, transmission electron microscopy, UV-Vis spectroscopic measurements, and X-ray photoemission spectroscopy. Nanoparticles with a predominance of Ag or Ag3PO4 were obtained according to the type of reducing agent used. All composites were tested for antimicrobial and antibiofilm activities against Gram-positive and Gram-negative (Staphylococcus aureus and Pseudomonas aeruginosa, respectively) bacteria and for cytotoxicity towards human skin keratinocytes and human fibroblasts. The nature of the nanoparticles, Ag or Ag3PO4, and their predominance seemed to affect the in vitro silver release and the antimicrobial and antibiofilm activities. The composites obtained by the citrate-assisted reduction gave rise to the best results.
RESUMO
Herein, we report a straightforward synthesis of valuable α-hydroxycarboxylic acid molecules via an acceptorless dehydrogenative coupling of ethylene glycol and primary alcohols. A bench-stable manganese complex catalyzed the reaction, which is scalable, with the product being isolated with high yields and selectivities under mild conditions. The protocol is environmentally benign, producing water and hydrogen gas as the only byproducts. Methanol can also be used as a C1 source for producing the platform molecule lactic acid, with a high turnover of >104 . The methodology was also used to functionalize alcohols derived from natural products and fatty acids. Furthermore, it was applied for synthesizing α-amino acid, α-thiocarboxylic acid, and several drugs and bioactive molecules, including endogenous metabolites, Danshensu, Enalapril, Lisinopril, and Rosmarinic acid. Preliminary mechanistic studies were performed to shed light on the mechanism involved in the reaction.