RESUMO
Depending upon nutrient availability, bacteria transit to multiple growth phases. The transition from the active to nongrowing phase results in reduced drug efficacy and, in some cases, even multidrug resistance. However, due to multiple alterations in the cell envelope, probing the drug permeation kinetics during growth phases becomes perplexing, especially across the Gram-negative bacteria's complex dual membrane envelope. To advance the understanding of drug permeation during the life cycle of Gram-negative bacteria, we sought to address two underlying objectives: (a) how changes are occurring inside the bacterial envelope during growth and (b) how the drug permeation and accumulation vary across both the membranes and in subcellular compartments during growth. Both objectives are met with the help of nonlinear optical technique second-harmonic generation spectroscopy (SHG). Specifically, using SHG, we probed the transport kinetics and accumulation of a quaternary ammonium compound (QAC), malachite green, inside Escherichia coli in various growth phases. Further insight about another QAC molecule, propidium iodide, is accomplished using fluorescence microscopy. Results indicate that actively growing cells have faster drug transport and higher cytoplasmic accumulation than slow- or nongrowing cells. In this regard, the rpoS gene plays a crucial role in limiting drug transport across the saturation phase cultures. Moreover, within a particular growth phase, membrane permeability undergoes gradual changes much before the subsequent growth phase commences. These outcomes signify the importance of reporting the growth phase and rate in drug efficacy studies.
RESUMO
Birnessite-type MnO2 (δ-MnO2) exhibits great potential as a cathode material for aqueous zinc-ion batteries (AZIBs). However, the structural instability and sluggish reaction kinetics restrict its further application. Herein, a unique protons intercalation strategy was utilized to simultaneously modify the interlayer environment and transition metal layers of δ-MnO2. The intercalated protons directly form strong O H bonds with the adjacent oxygens, while the increased H2O molecules also establish a hydrogen bond network (O H···O) between H2O molecules or bond with adjacent oxygens. Based on the Grotthuss mechanism, these bondings ultimately enhance the stability of layered structures and facilitate the rapid diffusion of protons. Moreover, the introduction of protons induces numerous oxygen vacancies, reduces steric hindrance, and accelerates ion transport kinetics. Consequently, the protons intercalated δ-MnO2 (H-MnO2-x) demonstrates exceptional specific capacity of 401.7 mAh/g at 0.1 A/g and a fast-charging performance over 1000 cycles. Density functional theory analysis confirms the improved electronic conductivity and reduced diffusion energy barrier. Most importantly, electrochemical quartz crystal microbalance tests combining with ex-situ characterizations verify the inhibitory effect of the interlayer proton environment on basic zinc sulfate formation. Protons intercalation behavior provides a promising avenue for the development of MnO2 as well as other cathodes in AZIBs.
RESUMO
The freshwater sponge, Ephydatia muelleri, lacks a nervous or endocrine system and yet it exhibits a coordinated whole-body action known as a "sneeze" that can be triggered by exposure to L-glutamate. It is not known how L-glutamate is obtained by E. muelleri in sufficient quantities (i.e., 70 µM) to mediate this response endogenously. The present study tested the hypothesis that L-glutamate can be directly acquired from the environment across the body surface of E. muelleri. We demonstrate carrier mediated uptake of two distinct saturable systems with maximal transport rates (Jmax) of 64.27 ± 4.98 and 25.12 ± 1.87 pmols mg-1 min-1, respectively. The latter system has a higher calculated substrate affinity (Km) of 2.87 ± 0.38 µM compared to the former (8.75 ± 1.00 µM), indicative of distinct systems that can acquire L-glutamate at variable environmental concentrations. Further characterization revealed potential shared pathways of L-glutamate uptake with other negatively charged amino acids, namely D-glutamate and L-aspartate, as well as the neutral amino acid L-alanine. We demonstrate that L-glutamate uptake does not appear to rely on exogenous sodium or proton concentrations as removal of these ions from the bathing media did not significantly alter uptake. Likewise, L-glutamate uptake does not seem to rely on internal proton motive forces driven by VHA as application of 100 nM of the VHA inhibitor bafilomycin did not alter uptake rates within E. muelleri tissues. Whether the acquired amino acid is used to supplement feeding or is stored and accumulated to mediate the sneeze response remains to be determined.
Assuntos
Ácido Glutâmico , Poríferos , Animais , Ácido Glutâmico/metabolismo , Poríferos/metabolismo , Água Doce , Transporte Biológico , Macrolídeos/farmacologia , Macrolídeos/metabolismoRESUMO
The mounting global energy demand urges surplus electricity generation. Due to dwindling fossil resources and environmental concerns, shifting from carbon-based fuels to renewables is vital. Though renewables are affordable, their intermittent nature poses supply challenges. In these contexts, aqueous flow batteries (AFBs), are a viable energy storage solution. This study tackles AFBs' energy density and efficiency challenges. Conventional strategies focus on altering molecule's solubility but overlook interface's transport kinetics. We show that triggering electrostatic forces at the interface can significantly enhance the mass transport kinetics of redox active molecules by introducing a powerful electrostatic flux over the diffusional flux, thereby exerting a precise directionality on the molecular transport. This approach of controlling the directionality of molecular flux in an all iron redox flow battery amplifies the current and power rating with approximately 140 % enhancement in the energy density.
RESUMO
Solid-state symmetrical battery represents a promising paradigm for future battery technology. However, its development is hindered by the deficiency of high-performance bipolar electrodes and compatible solid electrolytes. Herein, a quasi-solid-state all-V2O5 battery constructed by a binder-free carbon fabric-V2O5 nanowires@graphene (CVOG) bipolar electrode and a softly cross-linked polyethylene oxide-based solid polymer electrolyte (SPE) is reported. The synergetic effect of nano-structuring of V2O5, hierarchical conductive network, and graphene wrapping endows the CVOG electrode with boosted reaction kinetics and suppressed vanadium dissolution. The cathodic and anodic reactions of CVOG are decoupled by electrochemical analysis, conceiving the feasibility of constructing all-V2O5 full battery. In manifesting the solid-state all-V2O5 battery, the robust and elastic SPE exhibits high ionic conductivity, tight/self-adaptable electrolyte-electrode contact, and a low charge-transfer barrier. The resultant solid-state full battery exhibits a high reversible capacity of 158 mAh g-1 at 0.1 C, good capacity retention of over 61% from 0.1 C to 2 C, and remarkable cycling stability of 77% capacity retention after 1000 cycles at 1 C, which surpass other solid-state symmetrical batteries. Hence, this work provides a practice of high-performance solid-state batteries with symmetrical configuration and is constructive for next-generation battery technology.
RESUMO
Aqueous Zn-ion batteries offer the advantages of greater security and lower fabrication costs over their lithium-ion counterparts. However, their further advancement and practical application are hindered by the drastic decay in their performance due to the uncontrollable dendrite growth on Zn anodes. In this study, we fabricated a versatile three-dimensional (3D) interfacial layer (3D PVDF-Zn(TFO)2 (PVDF: poly(vinylidene fluoride); TFO: trifluoromethanesulfonate), which simultaneously formed porous Zn-metal anodes (PZn) with an enhanced (002) texture, via a in situ etching scheme. The 3D PVDF-Zn(TFO)2@PZn symmetrical cells leverage the advantages of surface coating and 3D porous architectures to yield extra-long cyclic lifetimes of over 5300 h (0.1 mA cm-2). The fabricated anodes were found to be compatible with MnO2 cathodes, and the resulting full batteries delivered an outstanding capacity of 336 mAh g-1 at 0.1 A g-1 and exhibited impressive long-term reversibility with a capacity retention of 78.7% for 2000 cycles. The proposed coating strategy is viable for developing porous structures with cutting-edge designs and for textured surface engineering.
RESUMO
In the preclinical phase of drug development, it is necessary to determine how the active compound can pass through the biological barriers surrounding the target tissue. In vitro barrier models provide a reliable, low-cost, high-throughput solution for screening substances early in the drug candidate development process, thus reducing more complex and costly animal studies. In this pilot study, the transport properties of TB501, an antimycobacterial drug candidate, were characterized using an in vitro barrier model of VERO E6 kidney cells. The compound was delivered into the apical chamber of the transwell insert, and its concentration passing through the barrier layer was measured through the automated sampling of the basolateral compartment, where media were replaced every 30 min for 6 h, and the collected samples were stored for further spectroscopic analysis. The kinetics of TB501 concentration obtained from VERO E6 transwell cultures and transwell membranes saturated with serum proteins reveal the extent to which the cell layer functions as a diffusion barrier. The large number of samples collected allows us to fit a detailed mathematical model of the passive diffusive currents to the measured concentration profiles. This approach enables the determination of the diffusive permeability, the diffusivity of the compound in the cell layer, the affinity of the compound binding to the cell membrane as well as the rate by which the cells metabolize the compound. The proposed approach goes beyond the determination of the permeability coefficient and offers a more detailed pharmacokinetic characterization of the transwell barrier model. We expect the presented method to be fruitful in evaluating other compounds with different chemical features on simple in vitro barrier models. The proposed mathematical model can also be extended to include various forms of active transport.
RESUMO
The transport behavior of ions in the nanopores has an important impact on the performance of the electrochemical devices. Although the classical Transmission-Line (TL) model has long been used to describe ion transport in pores, the boundary conditions for the applicability of the TL model remain controversial. Here, we investigated the transport kinetics of different ions, within nanochannels of different lengths, by using transient single-particle imaging with temporal resolution up to microseconds. We found that the ion transport kinetics within short nanochannels may deviate significantly from the TL model. The reason is that the ion transport under nanoconfinement is composed of multi basic stages, and the kinetics differ much under different stage domination. With the shortening of nanochannels, the electrical double layer (EDL) formation would become the "rate-determining step" and dominate the apparent ion kinetics. Our results imply that using the TL model directly and treating the in-pore mobility as an unchanged parameter to estimate the ion transport kinetics in short nanopores/nanochannels may lead to orders of magnitude bias. These findings may advance the understanding of the nanoconfined ion transport and promote the related applications.
RESUMO
An increase in the size of single-crystal particles can effectively reduce the interfacial side reactions of layered oxides for sodium-ion batteries at high voltages but may result in sluggish Na+ transport. Herein, single-crystal Na0.66Ni0.26Zn0.07Mn0.67O2 with increased proportions of {010} planes is synthesized by adding low-cost NaCl as the molten salt. With the assistance of a NaCl molten salt, the median diameter (D50) of single-crystal Na0.66Ni0.26Zn0.07Mn0.67O2 increases to 10.46 µm relative to that of the comparison sample without NaCl (6.57 µm). Electrolyte decomposition on the surface of single-crystal Na0.66Ni0.26Zn0.07Mn0.67O2 is considerably suppressed, owing to a decrease in the specific surface area. Moreover, the increased exposure of {010} planes is favorable for improving the Na+ transport kinetics of single-crystal particles. Therefore, at 100 mA g-1, single-crystal Na0.66Ni0.26Zn0.07Mn0.67O2 exhibits a high-capacity retention of 96.6% after 100 cycles, which is considerably greater than that of the comparison sample (86.8%). Moreover, the rate performance of single-crystal Na0.66Ni0.26Zn0.07Mn0.67O2 (average discharge capacity of 81.2 mAh g-1) is superior to that of the comparison sample (average discharge capacity of 61.2 mAh g-1) at 2000 mA g-1. This work provides a new approach for promoting the single-crystal growth of layered oxides for highly stable interfaces at high voltages without compromising Na+ transport kinetics.
RESUMO
Despite disadvantages, such as high cost and their poor predictive value, animal experiments are still the state of the art for pharmaceutical substance testing. One reason for this problem is the inability of standard cell culture methods to emulate the physiological environment necessary to recapitulate in vivo processes. Microphysiological systems offer the opportunity to close this gap. In this study, we utilize a previously employed microphysiological system to examine the impact of pressure and flow on the transportation of substances mediated by multidrug resistance protein 1 (MDR1) across an artificial cell-based tubular barrier. By using a miniaturized fluorescence measurement device, we could continuously track the MDR1-mediated transport of rhodamine 123 above the artificial barrier over 48 h. We proved that applying pressure and flow affects both active and passive transport of rhodamine 123. Using experimental results and curve fittings, the kinetics of MDR1-mediated transport as well as passive transport were investigated; thus, a kinetic model that explains this transport above an artificial tubular barrier was identified. This kinetic model demonstrates that the simple Michaelis-Menten model is not an appropriate model to explain the MDR1-mediated transport; instead, Hill kinetics, with Hill slope of n = 2, is a better fit. The kinetic values, Km, Vmax, and apparent permeability (Papp), obtained in this study are comparable with other in vivo and in vitro studies. Finally, the presented proximal tubule-on-a-chip can be used for pharmaceutical substance testing and to investigate pharmacokinetics of the renal transporter MDR1.
RESUMO
Developing ionogel electrolytes based on ionic liquid instead of volatile liquid in gel polymer electrolytes is regarded to be effective to diminish safety concerns in terms of overheating and fire. Herein, a zwitterion-based copolymer matrix based on the copolymerization of trimethylolpropane ethoxylate triacrylate (ETPTA) and 2-methacryloyloxyethylphosphorylcholine (MPC, one typical zwitterion) is developed. It is shown that introducing zwitterions into ionogel electrolytes can effectively optimize local lithium-ion (Li+ ) coordination environment to improve Li+ transport kinetics. The interactions between Li+ and bis(trifluoromethanesulfonyl)imide (TFSI- )/MPC lead to the formation of Li+ coordination shell jointly occupied by MPC and TFSI- . Benefiting from the competitive Li+ attraction of TFSI- and MPC, the energy barrier of Li+ desolvation is sharply decreased and thus the room-temperature ionic conductivity can reach a value of 4.4 × 10-4 S cm-1 . Besides, the coulombic interaction between TFSI- and MPC can greatly decrease the reduction stability of TFSI- , boosting in situ derivation of LiF-enriched solid electrolyte interface layer on lithium metal surface. As expected, the assembled Li||LiFePO4 cells deliver a high reversible discharge capacity of 139 mAh g-1 at 0.5 C and good cycling stability. Besides, the pouch cells exhibit a steady open-circuit voltage and can operate normally under abuse testing (fold, cut), showing its outstanding safety performance.
RESUMO
Studies of biological transport frequently neglect the explicit statistical correlations among particle site occupancies (i.e., they use a mean-field approximation). Neglecting correlations sometimes captures biological function, even for out-of-equilibrium and interacting systems. We show that neglecting correlations fails to describe free energy transduction, mistakenly predicting an abundance of slippage and energy dissipation, even for networks that are near reversible and lack interactions among particle sites. Interestingly, linear charge transport chains are well described without including correlations, even for networks that are driven and include site-site interactions typical of biological electron transfer chains. We examine three specific bioenergetic networks: a linear electron transfer chain (as found in bacterial nanowires), a near-reversible electron bifurcation network (as in complex III of respiration and other recently discovered structures), and a redox-coupled proton pump (as in complex IV of respiration).
Assuntos
Complexo IV da Cadeia de Transporte de Elétrons , Prótons , Oxirredução , Complexo IV da Cadeia de Transporte de Elétrons/metabolismo , Metabolismo Energético , Bombas de Próton , Transporte de Elétrons , Transporte BiológicoRESUMO
Metallic actuators have increasingly shown the potential to replace conventional piezoelectric ceramics and conducting polymers. However, it is still a great challenge to achieve strain amplitudes over 4% while maintaining fast strain responses. Herein, we fabricated bulk nanoporous palladium (NP-Pd) with microsheet-array-like hierarchically nanoporous (MAHNP) structure by dealloying a eutectic Al-Pd precursor. The hierarchical structure consists of array-like microsized channels/sheets and disordered nanosized networks. The locally ordered channels play a critical role in fast mass transport while nanoligaments accumulate a large surface area for hydrogen adsorption/absorption and desorption. Therefore, the MAHNP-Pd not only obtains a fast strain rate with the maximum value close to 1 × 10-4 s-1 but also exhibits an ultrahigh strain amplitude of 4.68%, exceeding all reported values for bulk electrochemical metallic actuators to date. Additionally, the superiority of the MAHNP structure is demonstrated in transport kinetics as benchmarked with the scenario of unimodal NP-Pd.
RESUMO
AMMONIUM TRANSPORTER/METHYLAMMONIUM PERMEASE/RHESUS (AMT) family members transport ammonium across membranes in all life domains. Plant AMTs can be categorized into AMT1 and AMT2 subfamilies. Functional studies of AMTs, particularly AMT1-type, have been conducted using model plants but little is known about the function of AMTs from crops. Sugarcane (Saccharum spp.) is a major bioenergy crop that requires heavy nitrogen fertilization but depends on a low carbon-footprint for competitive sustainability. Here, we identified and functionally characterized sugarcane ScAMT2;1 by complementing ammonium uptake-defective mutants of Saccharomyces cerevisiae and Arabidopsis thaliana. Reporter gene driven by the ScAMT2;1 promoter in A. thaliana revealed preferential expression in the shoot vasculature and root endodermis/pericycle according to nitrogen availability and source. Arabidopsis quadruple mutant plants expressing ScAMT2;1 driven by the CaMV35S promoter or by a sugarcane endogenous promoter produced significantly more biomass than mutant plants when grown in NH4 + and showed more 15N-ammonium uptake by roots and nitrogen translocation to shoots. In A. thaliana, ScAMT2;1 displayed a Km of 90.17 µM and Vmax of 338.99 µmoles h-1 g-1 root DW. Altogether, our results suggest that ScAMT2;1 is a functional high-affinity ammonium transporter that might contribute to ammonium uptake and presumably to root-to-shoot translocation under high NH4 + conditions.
RESUMO
The upregulation of glucose transporter (GLUT) is a typical pathological marker in numerous cancer types and a potential target for anti-cancer drug therapy. We developed a cell membrane-based glucose sensor for real-time monitoring of GLUT transport kinetics. By combining hydrogel layers and liposomes, a planar cell membrane was constructed over the electrode, preventing pore leakage and allowing for highly sensitive and selective measurements. Based on this continuous monitoring technique, we investigated the effect of GLUT1-specific inhibitors such as Cytorelaxation B and BAY-876. We also measured the affinity of different hexoses to GLUT1 using a normalized response time comparison based on the cell membrane sensor. Experimental results were consistent with the molecular docking simulation, indicating that the sensor can be adapted to measure the glucose transport kinetics in different pharmacological conditions. This work demonstrated that cell membrane transport channels could maintain their transmembrane function in-vitro, and it has potential application in evaluating drug-receptor interaction.
Assuntos
Proteínas Facilitadoras de Transporte de Glucose , Proteínas de Transporte de Monossacarídeos , Transporte Biológico , Membrana Celular/metabolismo , Glucose/metabolismo , Proteínas Facilitadoras de Transporte de Glucose/metabolismo , Transportador de Glucose Tipo 1/metabolismo , Cinética , Simulação de Acoplamento MolecularRESUMO
3D batteries possess apparent advantage in electrochemical ion-transport kinetics than the conventional-structured batteries. However, due to the special electrode configuration and fabrication complexity, 3D battery design has inherent issue of mechanical stability and only succeeds in microsystems, far from ideal. Herein, a high-stable, all-in-one structured 3D lithium-metal battery is designed which consists of paralleled microcell arrays. Fast ion-transport kinetics in full cell level can not only address the key issue of lithium dendrites in anode but also improve electrochemical performance of cathode. As a result, the resultant lithium metal anode acquires long-term stability of 1000-cycle life at a high current density of 10 mA cm-2 . Also the all-in-one structured lithium metal battery has general applicability for various cathodic materials and delivers significantly improved rate and cycling performance, as well as high areal capacity up to 10.4 mAh cm-2 .
RESUMO
Two-dimensional (2D) transition metal carbides (MXene) have shown great advantages as electrode materials in the new generation of energy storage, especially in supercapacitors. However, the inherent low specific capacitance and restacking layers of nanosheets that occur during electrode preparation further reduce the electrochemical performance of the materials. Based on this, we design a N, S co-doping electrode with a three-dimensional (3D) structure, which not only improves the specific capacitance through fundamentally modifying the electronic structure of the electrode materials, but also effectively improves the rate performance of the electrode by preventing the restacking of 2D materials. The N, S co-doping 3D architecture Ti3C2Tx electrode (TC/NS-3D) exhibits an excellent capacitance value of 440 F g-1 at 5 mV s-1 and 64% capacitance retention rate at a high scan rate of 1000 mV s-1 in 3 mol L-1 H2SO4 electrolyte. The TC/NS-3D electrode also shows excellent capacitance retention of 97.2% after the 10,000 cycles stability test. The density functional theory (DFT) analysis reveals the enhanced performance is attributed to accelerated intermediates transport kinetics promoted by 3D structure engineering and N, S co-doping for Ti3C2Tx. This study is promising in designing heteroatomic doping 3D structure MXene-based materials for electrochemical energy storage systems.
RESUMO
AIM: To develop a method for direct measurement of the fluorescent d-glucose analogue 2-NBDG transport across the plasma membrane of single skeletal muscle fibres and derive the theoretical framework for determining the kinetic parameters for d-glucose transport under basal conditions. METHODS: A novel method is described for measuring free 2-NBDG transport across plasma membrane of single rat muscle fibres at rest. The 2-NBDG uptake was >90% suppressed by 100 µM cytochalasin B in both fast-twitch and slow-twitch fibres, indicating that the 2-NBDG transport is GLUT-mediated. Fibres were identified as fast-twitch or slow-twitch based on the differential sensitivity of their contractile apparatus to Sr2+ . RESULTS: The time course of 2-NBDG uptake in the presence of 50 µM 2-NBDG follows a one-phase exponential plateau curve and is faster in fast-twitch (rate constant 0.053 ± 0.0024 s-1 ) than in slow-twitch fibres (rate constant 0.031 ± 0.0021 s-1 ). The rate constants were markedly reduced in the presence of 20 mM d-glucose to 0.0082 ± 0.0004 s-1 and 0.0056 ± 0.0002 s-1 in fast-twitch and slow-twitch fibres respectively. 2-NBDG transport was asymmetric, consistent with GLUT1 being the major functional GLUT isoform transporting 2-NBDG in muscle fibres at rest. The parameters describing the transport kinetics for both 2-NBDG and d-glucose (dissociation constants, Michaelis-Menten constants, maximal rates of uptake and outflow) were calculated from the measurements made with 2-NBDG. CONCLUSION: Free 2-NBDG and d-glucose transport across the plasma membrane of single rat muscle fibres at rest is fast, conclusively showing that the rate-limiting step in d-glucose uptake in skeletal muscle is not necessarily the GLUT-mediated transport of d-glucose.
Assuntos
Transportador de Glucose Tipo 1 , Fibras Musculares de Contração Rápida , Fibras Musculares de Contração Lenta , Animais , Cálcio/metabolismo , Membrana Celular/metabolismo , Glucose/metabolismo , Transportador de Glucose Tipo 1/metabolismo , Contração Muscular/fisiologia , Fibras Musculares de Contração Rápida/metabolismo , Fibras Musculares Esqueléticas/metabolismo , Fibras Musculares de Contração Lenta/metabolismo , Músculo Esquelético/metabolismo , RatosRESUMO
The sluggish charge transport kinetics that exist in the energy storage process of all-solid-state supercapacitors (ASSSCs) can be improved by designing open hierarchical porous structures for binder-free electrodes. Herein, a template-directed strategy is developed to fabricate open hierarchical porous Ni-Co-Zn-P nanoplate arrays (NCZP6T) through phosphating the electrodeposited NiCo-LDH nanosheets loaded on a template. At first, porous conductive NiZn alloy nanoplate arrays are rationally devised as the template by a strong magnetic field (SMF)-assisted electrodeposition. The Lorentz force caused by coupling the SMF with the electrical current induces a magnetohydrodynamic (MHD) flow (including the micro-MHD flow), which homogenizes the deposition coating, tunes the nucleation and growth of the NiZn alloy, and produces pores in the nanoplates. The open hierarchical porous structure offers a larger specific surface area and pore volume for accelerating charge transport and gives a synergistic effect between the inner porous conductive NiZn array template and the outer electrochemical active phosphides for high-performance hybrid ASSSCs. Accordingly, the battery-type electrode of NCZP6T shows a much higher specific capacitance of 3.81 F cm-2 at 1 mA cm-2, enhanced rate capability, and remarkable cycling stability at progressively varying current densities. Finally, the NCZP6T//FeS ASSSC delivers a high energy density of 77 µW h cm-2 at a large power density of 12 mW cm-2, outperforming most state-of-the-art supercapacitors.
RESUMO
L-Carnosine (ß-alanyl-L-histidine) is a well-known antioxidant and neuroprotector in various models on animals and cell cultures. However, while there is a plethora of data demonstrating its efficiency as a neuroprotector, there is a distinct lack of data regarding the mechanism of its take up by neurons. According to literature, cultures of rat astrocytes, SKPT cells and rat choroid plexus epithelial cells take up carnosine via the H+-coupled PEPT2 membrane transporter. We've assessed the effectiveness and mechanism of carnosine transport, and its stability in primary rat cortical culture neurons. We demonstrated that neurons take up carnosine via active transport with Km = 119 µM and a maximum velocity of 0.289 nmol/mg (prot)/min. Passive transport speed constituted 0.21â10-4 nmol/mg (prot)/min (with 119 µM concentration in the medium)-significantly less than active transport speed. However, carnosine concentrations over 12.5 mM led to passive transport speed becoming greater than active transport speed. Using PEPT2 inhibitor zofenopril, we demonstrated that PEPT2-dependent transport is one of the main modes of carnosine take up by neurons. Our experiments demonstrated that incubation with carnosine does not affect PEPT2 amount present in culture. At the same time, after removing carnosine from the medium, its elimination speed by culture cells reached 0.035 nmol/mg (prot)/min, which led to a decrease in carnosine quantity to control levels in culture within 1 h. Thus, carnosine is taken up by neurons with an effectiveness comparable to that of other PEPT2 substrates, but its elimination rate suggests that for effective use as a neuroprotector it's necessary to either maintain a high concentration in brain tissue, or increase the effectiveness of glial cell synthesis of endogenous carnosine and its shuttling into neurons, or use more stable chemical modifications of carnosine.