Effect of Blanching Pomegranate Seeds on Physicochemical Attributes, Bioactive Compounds and Antioxidant Activity of Extracted Oil.

This study investigated the effect of blanching pomegranate seeds (PS) on oil yield, refractive index (RI), yellowness index (YI), conjugated dienes (K232), conjugated trienes (K270), total carotenoid content (TCC), total phenolic compounds (TPC) and DPPH radical scavenging of the extracted oil. Furthermore, phytosterol and fatty acid compositions of the oil extracted under optimum blanching conditions were compared with those from the oil extracted from unblanched PS. Three different blanching temperature levels (80, 90, and 100 °C) were studied at a constant blanching time of 3 min. The blanching time was then increased to 5 min at the established optimum blanching temperature (90 °C). Blanching PS increased oil yield, K232, K270, stigmasterol, punicic acid, TPC and DPPH radical scavenging, whereas YI, ß-sitosterol, palmitic acid and linoleic acid were decreased. The RI, TCC, brassicasterol, stearic acid, oleic acid and arachidic acid of the extracted oil were not significantly (p > 0.05) affected by blanching. Blanching PS at 90 °C for 3 to 5 min was associated with oil yield, TPC and DPPH. Blanching PS at 90 °C for 3 to 5 min will not only increase oil yield but could also improve functional properties such as antioxidant activity, which are desirable in the cosmetic, pharmaceutical, nutraceutical and food industries.

Anti-Inflammatory and Analgesic Effect of Arachic Acid Ethyl Ester Isolated from Propolis.

Inflammatory diseases are a real public health problem worldwide. Many synthetic drugs used in the treatment of inflammatory diseases such as steroidal anti-inflammatory drugs, nonsteroidal anti-inflammatory drugs (NSAIDs) and immunosuppressive drugs have harmful side effects. However, there are natural products like propolis, which is traditionally used in the treatment of pain. The objective of this work was to evaluate the anti-inflammatory and analgesic activities of the ethyl ester of arachic acid, a compound isolated from Cameroonian propolis. The ethyl ester of arachic acid was isolated by chromatography of the ethanolic extract of propolis harvested at Tala-Mokolo (Far North Region of Cameroon) and identified by nuclear magnetic resonance (NMR) spectra and the 1H-1H correlated spectroscopy. The anti-inflammatory and analgesic properties of oral administration of arachic acid ethyl ester (12.5, 25.0, and 50.0 mg/kg bw) were evaluated using carrageenan-induced paw edema, xylene-induced ear edema, cotton pellets-induced granuloma formation, and hot plate test in rat. Arachic acid ethyl ester produced maximum inhibition at 50.0 mg/kg for carrageenan-induced paw edema (62.5%), xylene-induced ear edema (54.5%), cotton pellet-induced granuloma (47.4%), and increased mean latency for hot plate test in rats. These results show clearly that the arachic acid ethyl ester has acute and chronic anti-inflammatory properties as well as central analgesic properties. This justifies the use of propolis in the treatment of pain in traditional medicine.

Effects of saturated and polyunsaturated fatty acids on interactions with cholesterol versus 7-ketocholesterol in Langmuir monolayers and their potential biological implications.

In this work the Langmuir monolayer technique was used to study interactions between cholesterol (chol) and 7-ketocholesterol (7-KC) with saturated (arachidic acid, AA) and polyunsaturated fatty acids (PUFAs) (ω-3 α-linolenic acid, α-LA,and ω-6 γ- linolenic, γ-LA) in order to get insight into their potential role in atherosclerosis. For this study, surface pressure (π)-area (A) isotherms, compressibility modulus (Cs-1) versus π plots, Brewster angle microscopy (BAM) images and excess functions (Aexc and ΔGexc) were analysed. Different behaviour has been observed. For cholesterol/AA mixed monolayers, components immiscibility occurs, whatever the surface pressure or the mixtures composition is, whereas for the 7-KC/AA mixed system, ideal behaviour was observed at low and high surface pressures for all the investigated compositions. However, the remaining mixed studied systems (sterol/PUFA) exhibit negative deviations from the ideality, although some differences do occurr. The magnitude of these deviations depend on the kind of a PUFA (for ω-3 PUFA greater than for ω-6) - attributed to the different geometry of their acyl chains- and the type of a sterol (for 7-KC greater than for cholesterol).The strength of attractive interactions followed the order: chol/ γ-LA <7-KC/γ-LA < chol/α-LA < 7-KC/ α-LA, postulating the formation of stable complexes of 1:2 stoichiometry for 7-KC/α-LA mixed monolayers and 1:1 stoichiometry for chol/α-LA mixed films. For 7-KC/γ-LA system, the formation of a low stability complex of 2:1 stoichiometry was suggested. The existence of these complexes can play an important role in diminishing the circulating sterols in the blood stream, thus decreasing the probability of atherosclerotic plaques formation.

Molecular basis of P450 OleTJE: an investigation of substrate binding mechanism and major pathways.

Cytochrome P450 OleTJE has attracted much attention for its ability to catalyze the decarboxylation of long chain fatty acids to generate alkenes, which are not only biofuel molecule, but also can be used broadly for making lubricants, polymers and detergents. In this study, the molecular basis of the binding mechanism of P450 OleTJE for arachidic acid, myristic acid, and caprylic acid was investigated by utilizing conventional molecular dynamics simulation and binding free energy calculations. Moreover, random acceleration molecular dynamics (RAMD) simulations were performed to uncover the most probable access/egress channels for different fatty acids. The predicted binding free energy shows an order of arachidic acid < myristic acid < caprylic acid. Key residues interacting with three substrates and residues specifically binding to one of them were identified. The RAMD results suggest the most likely channel for arachidic acid, myristic acid, and caprylic acid are 2e/2b, 2a and 2f/2a, respectively. It is suggested that the reaction is easier to carry out in myristic acid bound system than those in arachidic acid and caprylic acid bound system based on the distance of Hß atom of substrate relative to P450 OleTJE Compound I states. This study provided novel insight to understand the substrate preference mechanism of P450 OleTJE and valuable information for rational enzyme design for short chain fatty acid decarboxylation.

Free fatty acids and their esters modulate isothermal crystallization of anhydrous milk fat.

The effect of free fatty acids with different chain lengths or unsaturation degree on anhydrous milk fat (AMF) crystallization was evaluated. The impact of esterification was also studied using three triglycerides. Melted blends containing the additives at concentrations lower than 12wt.% were quenched at 25°C and isothermal crystallization was monitored by pulsed low-resolution nuclear magnetic resonance. In parallel, polarized light microscopy was used to observe the microstructure. Compounds based on long chain saturated fatty acids, i.e. palmitic, stearic, eicosanoic acids, tripalmitin and tristearin accelerated crystallization. Conversely, propanoic, hexanoic and oleic acids slowed down the process, while triacetin had no impact. Interestingly, above a critical concentration, the addition of palmitic, stearic or eicosanoic acids caused a transition from a one-step to two-step process. Gompertz model was used to fit the experimental data and to assess the influence of the molecular properties of the additives on the kinetic parameters.

Continuous gradient temperature Raman spectroscopy of N-6DPA and DHA from -100 to 20°C.

One of the great unanswered questions with respect to biological science in general is the absolute necessity of docosahexaenoic acid (DHA, 22:6n-3) in fast signal processing tissues. N-6 docosapentaenoic acid (n-6DPA, 22:5n-6), with just one less double bond, group, is fairly abundant in terrestrial food chains yet cannot substitute for DHA. Gradient temperature Raman spectroscopy (GTRS) applies the temperature gradients utilized in differential scanning calorimetry (DSC) to Raman spectroscopy, providing a straightforward technique to identify molecular rearrangements that occur near and at phase transitions. Herein we apply GTRS and DSC to n-6DPA and DHA from -100 to 20°C. 20Mb three-dimensional data arrays with 0.2°C increments and first/second derivatives allowed complete assignment of solid, liquid and transition state vibrational modes, including low intensity/frequency vibrations that cannot be readily analyzed with conventional Raman. N-6DPA and DHA show significant spectral changes with premelting (-33 and -60°C, respectively) and melting (-27 and -44°C, respectively). The CH2(HCCH)CH2 moieties are not identical in the second half of the DHA and DPA structures. DPA has bending (1450cm-1) over almost the entire temperature range. In contrast, DHA contains major CH2 twisting (1265cm-1) with no noticeable CH2 bending, consistent with a flat helical structure with a small pitch. Further modeling of neuronal membrane phospholipids must take into account torsion present in the DHA structure, which essential in determining whether the lipid chain is configured more parallel or perpendicular to the hydrophilic head group.

Beyond the classic eicosanoids: Peripherally-acting oxygenated metabolites of polyunsaturated fatty acids mediate pain associated with tissue injury and inflammation.

Pain is a complex sensation that may be protective or cause undue suffering and loss of function, depending on the circumstances. Peripheral nociceptor neurons (PNs) innervate most tissues, and express ion channels, nocisensors, which depolarize the cell in response to intense stimuli and numerous substances. Inflamed tissues manifest inflammatory hyperalgesia in which the threshold for pain and the response to painful stimuli are decreased and increased, respectively. Constituents of the inflammatory milieu sensitize PNs, thereby contributing to hyperalgesia. Polyunsaturated fatty acids undergo enzymatic and free radical-mediated oxygenation into an array of bioactive metabolites, oxygenated polyunsaturated fatty acids (oxy-PUFAs), including the classic eicosanoids. Oxy-PUFA production is enhanced during inflammation. Pioneering studies by Vane and colleagues from the early 1970s first implicated classic eicosanoids in the pain associated with inflammation. Here, we review the production and action of oxy-PUFAs that are not classic eicosanoids, but nevertheless are produced in injured/ inflamed tissues and activate or sensitize PNs. In general, oxy-PUFAs that sensitize PNs may do so directly, by activation of nocisensors, ion channels or GPCRs expressed on the surface of PNs, or indirectly, by increasing the production of inflammatory mediators that activate or sensitize PNs. We focus on oxy-PUFAs that act directly on PNs. Specifically, we discuss the role of arachidonic acid-derived 12S-HpETE, HNE, ONE, PGA2, iso-PGA2 and 15d-PGJ2, 5,6-and 8,9-EET, PGE2-G and 8R,15S-diHETE, as well as the linoleic acid-derived 9-and 13-HODE in inducing acute nocifensive behavior and/or inflammatory hyperalgesia in rodents. The nocisensors TRPV1, TRPV4 and TRPA1, and putative Gαs-type GPCRs are the PN targets of these oxy-PUFAs.

Dynamics driven by lipophilic force in Langmuir monolayers: In-plane and out-of-plane growth.

While monolayer area fraction versus time (A(n)-t) curves obtained from surface pressure-area (π-A) isotherms for desorption-dominated (DD) processes in Langmuir monolayers of fatty acids represent continuous loss, those from Brewster angle microscopy (BAM) also show a two-dimensional (2D) coalescence. For nucleation-dominated (ND) processes both techniques suggest competing processes, with BAM showing 2D coalescence alongside multilayer formation. π enhances both DD and ND processes with a lower cutoff for ND processes, while temperature has a lower cutoff for DD but negligible effect on ND processes. Hydrocarbon chain length has the strongest effect, causing a crossover from DD to ND dynamics. Imaging ellipsometry of horizontally transferred films onto Si(100) shows Stranski-Krastanov-like growth for ND process in an arachidic acid monolayer resulting in successive stages of monolayer, trilayer, and multilayer islands, ridges from lateral island coalescence, and shallow wavelike structures from ridge coalescence on the film surface. These studies show that lipophilic attraction between hydrocarbon chains is the driving force at all stages of long-term monolayer dynamics.

Spontaneous nematic alignment of a lipid nanotube in aqueous solutions.

The dispersibility and liquid crystal formation of a self-assembled lipid nanotube (LNT) was investigated in a variety of aqueous solutions. As the lipid component, we chose a bipolar lipid with glucose and tetraglycine headgroups, which self-assembled into an LNT with a small outer diameter of 16 to 17 nm and a high axial ratio of more than 310. The LNT gave a stable colloidal dispersion in its dilute solutions and showed spontaneous liquid crystal (LC) alignment at relatively low concentrations and in a pH region including neutral pH. The LNT samples with shorter length distributions were prepared by sonication, and the relationship between the LNT axial ratio and the minimum LC formation concentration was examined. The robustness of the LNT made the liquid crystal stable in mixed solvents of water/ethanol, water/acetone, and water/tetrahydrofuran (1:1 by volume) and at a temperature of up to 90 °C in water. The observed colloidal behavior of the LNT was compared to those of similar 1D nanostructures such as a phospholipid tubule.

Asymmetric synthesis of trisubstituted oxazolidinones by the thiourea-catalyzed aldol reaction of 2-isocyanatomalonate diester.

A new method has been developed for the synthesis of chiral 4-carboxyl oxazolidinones by the catalytic asymmetric aldol reaction of an isocyanatomalonate diester with an aldehyde in the presence of a thiourea catalyst. The resulting chiral 4-carboxyl oxazolidinones are the equivalent of ß-hydroxy-α-amino acids bearing a tri- or tetrasubstituted carbon center at their α position. With this in mind, this procedure was successfully applied to the first total synthesis of mycestericin C, which was completed in 12 steps and represents one of the shortest reported sequences for the construction of natural products of this type.

Internal lipids of felted, yellowed and pathologically thin wool.

The keratin fibers contain small amount of the internal lipids which are in free state or bound with fiber proteins via tioester of 18-methyleicosanoic acid. Today the origin of these lipids, their composition and functional properties are still not found. Therefore, our objective was to examine the content and composition of internal lipids in sheep's wool with different defects. We observed that regardless of the type of fibers defect there are significant changes especially in the quality composition of the internal lipids, although the total content of free and covalently bound lipids in all cases is practically identical. Notably, both free and covalently bound lipids composition of felted and simultaneously felted and yellowed wool is characterized by changes in contents mainly of free fatty acids and ceramides whereas abnormal thinning of fibers is accompanied only by a decrease of sulfolipids.

Polyethylene glycol-modified arachidyl chitosan-based nanoparticles for prolonged blood circulation of doxorubicin.

Doxorubicin (DOX)-loaded nanoparticles based on polyethylene glycol-conjugated chitosan oligosaccharide-arachidic acid (CSOAA-PEG) were explored for potential application to leukemia therapy. PEG was conjugated with CSOAA backbone via amide bond formation and the final product was verified by (1)H NMR analysis. Using the synthesized CSOAA-PEG, nanoparticles having characteristics of a 166-nm mean diameter, positive zeta potential, and spherical shape were produced for the delivery of DOX. The mean diameter of CSOAA-PEG nanoparticles in the serum solution (50% fetal bovine serum) remained relatively constant over 72 h as compared with CSOAA nanoparticles (changes of 20.92% and 223.16%, respectively). The sustained release pattern of DOX from CSOAA-PEG nanoparticles was displayed at physiological pH, and the release rate increased under the acidic pH conditions. The cytotoxicity of the CSOAA-PEG conjugate was negligible in human leukemia cells (K562) at the concentrations tested (∼ 100 µg/ml). The uptake rate of DOX from the nanoparticles by K562 cells was higher than that from the solution. Judging from the results of pharmacokinetic studies in rats, in vivo clearance rate of DOX from the CSOAA-PEG nanoparticle group was slower than other groups, subsequently extending the circulation period. The PEGylated CSOAA-based nanoparticles could represent an effective nano-sized delivery system for DOX which has been used for the treatment of blood malignancies.

Self-assembled magnetic resonance imaging nanoprobes based on arachidyl chitosan for cancer diagnosis.

Arachidyl chitosan (chitosan oligosaccharide-arachidic acid; CSOAA)-based self-assembled nanoprobes for magnetic resonance imaging (MRI) of neoplastic lesions was developed and evaluated in vitro. Diethylenetriaminepentaacetic dianhydride (DTPA) was conjugated to chitosan oligosaccharide (CSO) and Gd(3+) was chelated to the resulting ligand. DTPA conjugation and Gd(3+) chelation were confirmed primarily by Fourier transform infrared spectroscopy (FT-IR) and zeta potential measurement. A spherical nanoprobe of around 150 nm mean diameter in the tested concentration range was formed in an aqueous environment by simple dissolution. The critical aggregation concentration (CAC) of the CSOAA-based nanoprobe was 3.86 µg/ml, indicating its stability after dilution in body fluid. The nanoprobe had negligible toxicity in head and neck cancer cell lines (Hep-2 and FaDu cells). The amount of Cy5.5-labeled nanoprobe taken-up by cells, as observed by confocal laser scanning microscopy (CLSM), increased according to incubation time (up to 12h). A phantom study showed a T1-positive contrast-enhancing effect of the developed CSOAA-based nanoprobe, compared to that of the commercial formulation (Gd-DTPA; Magnevist). These results indicate that the CSOAA-based nanoprobe can be used for efficient MR imaging of neoplastic cells.

Chitosan oligosaccharide-arachidic acid-based nanoparticles for anti-cancer drug delivery.

Chitosan oligosaccharide-arachidic acid (CSOAA) conjugate was successfully synthesized and used for the development of self-assembled nanoparticles for doxorubicin (DOX) delivery. The molar substitution of AA on CSO and critical micelle concentration (CMC) of CSOAA were measured. Physicochemical properties of DOX-loaded CSOAA-based nanoparticles, such as particle size, zeta potential and morphology, were also characterized. The DOX-loaded CSOAA-based nanoparticles showed spherical shape with a mean diameter of 130 nm and positive charge. According to the result of in vitro release test, DOX-loaded CSOAA-based nanoparticles exhibited sustained and pH-dependent drug release profiles. The CSOAA showed negligible cytotoxicity in FaDu, human head and neck cancer, cells. Cellular uptake of DOX in FaDu cells was higher in the nanoparticle-treated group compared to the free DOX group. The anti-tumor efficacy of DOX-loaded nanoparticles was also verified in FaDu tumor xenografted mouse model. These results suggested that synthesized amphiphilic CSOAA might be used for the preparation of self-assembled nanoparticles for anti-cancer drug delivery.

Insights into the structure of covalently bound fatty acid monolayers on a simplified model of the hair epicuticle from molecular dynamics simulations.

The epicuticle is the outermost layer of the human hair, and consists of a monolayer of fatty acids that is predominantly 18-methyleicosanoic acid (18-MEA) covalently bound to a protein matrix. Surprisingly, despite the clear scientific and industrial importance, the detailed molecular structure of this fatty acid layer is still poorly understood. In this work, we aim to gain insight into the structure of this so-called F-layer by performing molecular dynamics simulations on a simplified hair surface model consisting of a monolayer of 18-MEA covalently attached to graphene sheets at various separation distances. The relative free energy of the fatty acid layer was calculated as a function of separation distance in order to obtain the optimal packing density of the fatty acids. Conformational properties such as the thickness, tilt angle, and order parameter of the fatty acid layers were also calculated to characterize the structure of the F-layer. Simulations of the structurally similar eicosanoic acid (EA) were also performed as a comparison and to investigate the role of the anteiso-methyl side chain at the 18th position of 18-MEA. The degree of water penetration into the fatty acid layer at the various separation distances was also investigated. Our simulations suggest that the optimal spacing for the fatty acids is between 0.492 and 0.651 nm, in contrast to the generally accepted literature value of around 0.9-1.0 nm. This results in a packing density of between 0.21 and 0.37 nm(2) per fatty acid molecule and a thickness of around 2.01-2.64 nm. We also show that, at larger separation distances, the 18-MEA fatty acid provides a slightly better hydrophobic layer than the EA fatty acid, suggesting that the 18-MEA fatty acid may have been naturally selected to provide better protection for the hair when it loses some of the fatty acids due to daily wear and tear. To our knowledge, this is the first attempt to systematically investigate the hair surface structure and properties with molecular simulations.

Amorphous iron-(hydr) oxide networks at liquid/vapor interfaces: in situ X-ray scattering and spectroscopy studies.

Surface sensitive X-ray reflectivity (XR), fluorescence (XF), and grazing incidence X-ray diffraction (GIXD) experiments were conducted to determine the accumulation of ferric iron Fe (III) or ferrous iron Fe (II) under dihexadecyl phosphate (DHDP) or arachidic acid (AA) Langmuir monolayers at liquid/vapor interfaces. Analysis of the X-ray reflectivity and fluorescence data of monolayers on the aqueous subphases containing FeCl(3) indicates remarkably high levels of surface-bound Fe (III) in number of Fe(3+) ions per molecule (DHDP or AA) that exceed the amount necessary to neutralize a hypothetically completely deprotonated monolayer (DHDP or AA). These results suggest that nano-scale iron (hydr) oxide complexes (oxides, hydroxides or oxyhydroxides) bind to the headgroups and effectively overcompensate the maximum possible charges at the interface. The lack of evidence of in-plane ordering in GIXD measurements and strong effects on the surface-pressure versus molecular area isotherms indicate that an amorphous network of iron (hydr) oxide complexes contiguous to the headgroups is formed. Similar experiments with FeCl(2) generally resulted with the oxidation of Fe (II)-Fe (III) which consequently leads to ferric Fe (III) complexes binding albeit with less iron at the interface. Controlling the oxidation of Fe (II) changes the nature and amount of binding significantly. The implications to biomineralization of iron (hydr) oxides are briefly discussed.

Synchrotron FTIR microscopy of Langmuir-Blodgett monolayers and polyelectrolyte multilayers at the solid-solid interface.

Synchrotron FTIR microscopy has been used to probe the structure of model boundary lubricant layers confined at the solid-solid interface. The combination of high brightness of the IR source and a novel contact geometry that uses a hemispherical internal reflection element as the means for light delivery has enabled the detection of <2.5 nm thin monolayer lubricant layers in the solid-solid contact, in addition to allowing for spectral acquisition from specific regions of the contact. Spectra of hydration water from within a confined polyelectrolyte multilayer film have also been acquired, highlighting the altered hydrogen bonding environment within the polymer layer.

Composition of fatty oils from semen ziziphi spinosae and its cardiotonic effect on isolated toad hearts.

In this study, the composition of fatty oil from Semen Ziziphi Spinosae and its cardiotonic activity on the heart isolated from a toad were studied. Oil-in-water (O/W) emulsions of fatty oil were prepared by the perfusion method. The fatty oil had a positive inotropic effect on isolated rat hearts at a concentration between 5 × 10(-3) and 2 × 10(-2) mL/10 mL, and the effect was in positive correlation with the concentration of calcium ions. In addition, this effect was inhibited by 2 mg/mL nifedipine, suggesting that the cardiotonic mechanism could be responsible for accelerating the inflow of calcium ions. Gas chromatography-mass spectrometry analysis showed that the main constituents of the fatty oil were 9-octadecenoic acid (43.32%), 9,12-octadecadienoic acid (42.57%), hexadecanoic acid (4.76%), 9-eicosenoic acid (2.95%), stearic acid (2.41%) and arachidic acid (0.81%). This preliminary study revealed that the fatty oil of Semen Ziziphi Spinosae exhibited remarkable cardiotonic activity in the tested models, and it is necessary to further reveal the effective substances of the fatty oil.

Characterization of composite phthalocyanine-fatty acid films from the air/water interface to solid supports.

A commercial vanadyl 2,9,16,23-tetraphenoxy-29H,31H-phthalocyanine (VOPc) was dissolved in chloroform and spread on ultrapure water subphase in a Langmuir trough. The floating film was thoroughly characterized at the air-water interface by means of the Langmuir isotherm, Brewster angle microscopy, UV-vis reflection spectroscopy, and infrared measurements carried out directly at the air-water interface. All the results showed the formation of a non-uniform and aggregated floating layer, too rigid to be transferred by the Langmuir-Blodgett (LB) method. For this reason, a mixture of arachidic acid and VOPc was realized, characterized, and transferred by the LB technique on solid substrates. Interface measurements and atomic force microscopy analysis suggested the formation of a uniform arachidic acid film and a superimposed VOPc placed in prone configuration.

The Langmuir-Blodgett technique as a tool for homeotropic alignment of fluorinated liquid crystals mixed with arachidic acid.

Some fluoro-substituted liquid crystals mixed with arachidic acid in monolayers formed at air-liquid (Langmuir films) and air-solid substrate (Langmuir-Blodgett films) interfaces were investigated. Molecular organization in Langmuir films was determined on the basis of the analysis of the shape of the surface pressure-mean molecular area isotherm and observations made by means of a Brewster angle microscope. It was found that in the compression process the liquid crystal molecules are pushed out towards the top of the first monolayer being in direct contact with the subphase. Langmuir films were transferred onto the quartz substrates at various surface pressures and mono- and multilayered Langmuir-Blodgett films were obtained. The films were characterized using electronic absorption measurements. The conditions for obtaining the homeotropic orientation of the liquid crystal molecules were determined.