Precise quantification of microRNAs based on proximity ligation of AuNPs-immobilized DNA probes.

MiRNAs are critical regulators of target gene expression in many biological processes and are considered promising biomarkers for diseases. In this study, we developed a simple, specific, and sensitive miRNA detection method based on proximity ligation reaction, which is easy to operate. The method uses a pair of target-specific DNA probes immobilized on the same gold nanoparticles (AuNPs), which hybridize to the target miRNA. Hybridization brings the probes close together, allowing the formation of a continuous DNA sequence that can be amplified by Quantitative Real-time PCR (qPCR). This method eliminates the need for complex reverse transcription design and achieves high specificity for discriminating single base mismatches between miRNAs through a simple procedure. This method can sensitively measure three different miRNAs with a detection limit of 20 aM, providing high versatility and sensitivity, even distinguishing single-base variations among members of the miR-200 family with high selectivity. Due to its high selectivity and sensitivity, this method has important implications for the investigation of miRNA biological functions and related biomedical research.

Stable Immobilization of DNA to Silica Surfaces by Sequential Michael Addition Reactions Developed with Insights from Confocal Raman Microscopy.

The immobilization of DNA to surfaces is required for numerous biosensing applications related to the capture of target DNA sequences, proteins, or small-molecule analytes from solution. For these applications to be successful, the chemistry of DNA immobilization should be efficient, reproducible, and stable and should allow the immobilized DNA to adopt a secondary structure required for association with its respective target molecule. To develop and characterize surface immobilization chemistry to meet this challenge, it is invaluable to have a quantitative, surface-sensitive method that can report the interfacial chemistry at each step, while also being capable of determining the structure, stability, and activity of the tethered DNA product. In this work, we develop a method to immobilize DNA to silica, glass, or other oxide surfaces by carrying out the reactions in porous silica particles. Due to the high specific surface area of porous silica, the local concentrations of surface-immobilized molecules within the particle are sufficiently high that interfacial chemistry can be monitored at each step of the process with confocal Raman microscopy, providing a unique capability to assess the molecular composition, structure, yield, and surface coverage of these reactions. We employ this methodology to investigate the steps for immobilizing thiolated-DNA to thiol-modified silica surfaces through sequential Michael addition reactions with the cross-linker 1,4-phenylene-bismaleimide. A key advantage of employing a phenyl-bismaleimide over a comparable alkyl coupling reagent is the efficient conversion of the initial phenyl-thiosuccinimide to a more stable succinamic acid thioether linkage. This transformation was confirmed by in situ Raman spectroscopy measurements, and the resulting succinamic acid thioether product exhibited greater than 95% retention of surface-immobilized DNA after 12 days at room temperature in aqueous buffer. Confocal Raman microscopy was also used to assess the conformational freedom of surface-immobilized DNA by comparing the structure of a 23-mer DNA hairpin sequence under duplex-forming and unfolding conditions. We find that the immobilized DNA hairpin can undergo reversible intramolecular duplex formation based on the changes in frequencies and intensities of the phosphate backbone and base-specific vibrational modes that are informative of the hybridization state of DNA.

Ultrasensitive aptamer-functionalized Cu-MOF fluorescent nanozyme as an optical biosensor for detection of C-reactive protein.

In the present work, an aptasensing method based on integration of RNA on Cu-MOF was developed for detection of C-Reactive Protein (CRP). Cu-MOF showed stimulated fluorescence and mimetic peroxidase enzymatic activity at the time and can be used as dual-signal transduction. CRP binding RNA was used as a highly selective recognition element and immobilized on the Cu-MOF. The immobilized RNA can block the peroxidase activity and fluorescence of the signal traducer probe. Adding CRP to the RNA/Cu-MOF will release RNA from the surface of Cu-MOF and recover both the stimulated fluorescence and peroxidase activity. A biosensor was built for detection of CRP using the two modes of transduction, either colorimetry or fluorometry. A dynamic linear range was obtained from 0.1 to 50 ng mL -1with a limit of detection (LOD) as small as 40 pg mL -1was calculated in fluorescence mode and 240 pg mL -1 as LOD in colorimetry mode. The LODs are lower than the LOD of nephelometric techniques used in clinical practice and is comparable to the normal clinical cutoff value in high-sensitivity CRP assays (1 µg/mL). The aptasensor was successfully applied for detection of CRP in Covid-19 patients with spike recoveries between 84 and 102% and RSD from 0.94% to 2.05%.

Highly Precise and Sensitive Polymerase Chain Reaction Using Mesoporous Silica-Immobilized Enzymes.

A highly precise and sensitive technology that enables DNA amplification/detection from minimal amounts of nucleic acid is expected to find applicability in genetic testing involving small amounts of samples. The use of a free enzyme in conventional DNA amplification techniques, such as the polymerase chain reaction (PCR), frequently causes side reactions (i.e., nonspecific DNA amplification) when ≤103 substrate DNA molecules are present, thereby preventing selective amplification of the target DNA. To address this issue, we have developed a novel DNA amplification system, mesoporous silica-enhanced PCR (MSE-PCR), which involves the immobilization of a thermostable DNA polymerase from Thermococcus kodakaraensis (KOD DNA polymerase) into highly ordered nanopores of the mesoporous silica to control the reaction environment around the enzyme. In the MSE-PCR system using immobilized KOD DNA polymerase, such nonspecific DNA amplification was remarkably inhibited under the same conditions. Furthermore, the optimization of mesoporous silica pore sizes enabled selective and efficient DNA amplification from DNA substrates at the single-molecule level, i.e., one ten-thousandth of the amount of substrate DNA required for a DNA amplification reaction using a free enzyme. The results obtained in this study have shown that the nanopores of mesoporous silica can inhibit nonspecific reactions in DNA amplification, thereby considerably improving the specificity and sensitivity of the DNA polymerase reaction.

Hairpin-like siRNA-Based Spherical Nucleic Acids.

The therapeutic use of small interfering RNAs (siRNAs) as gene regulation agents has been limited by their poor stability and delivery. Although arranging siRNAs into a spherical nucleic acid (SNA) architecture to form siRNA-SNAs increases their stability and uptake, prototypical siRNA-SNAs consist of a hybridized architecture that causes guide strand dissociation from passenger strands, which limits the delivery of active siRNA duplexes. In this study, a new SNA design that directly attaches both siRNA strands to the SNA core through a single hairpin-shaped molecule to prevent guide strand dissociation is introduced and investigated. This hairpin-like architecture increases the number of siRNA duplexes that can be loaded onto an SNA by 4-fold compared to the original hybridized siRNA-SNA architecture. As a result, the hairpin-like siRNA-SNAs exhibit a 6-fold longer half-life in serum and decreased cytotoxicity. In addition, the hairpin-like siRNA-SNA produces more durable gene knockdown than the hybridized siRNA-SNA. This study shows how the chemistry used to immobilize siRNA on nanoparticles can markedly enhance biological function, and it establishes the hairpin-like architecture as a next-generation SNA construct that will be useful in life science and medical research.

Simple Design Concept for Dual-Channel Detection of Ochratoxin A Based on Bifunctional Metal-Organic Framework.

A simple fluorescence and electrochemical dual-channel biosensor based on bifunctional Zr(IV)-based metal-organic framework (Zr-MOF) was proposed to detect Ochratoxin A (OTA). The bifunctional Zr-MOF, with photoluminescence properties and enormous electroactive ligands, was exploited to load OTA-specific aptamers for designing signal probes, greatly simplifying the probe-fabrication process and improving sensing reliability. Upon specific recognition of aptamer toward OTA, the anchored probe was released from the sensing interface into the reaction solution. In this circumstance, the increased amount of the signal probe in reaction solution led to an enhanced fluorescence response, while the decreased amount of the signal probe on the sensing interface resulted in a diminished electrochemical response. According to the dual-channel signal change with increasing OTA concentration, the visual fluorescence strategy was established for intuitive OTA detection, and meanwhile, sensitive electrochemical assay with a detection limit of 0.024 pg/mL was also achieved with the help of one-step electrodeposition as a sensing platform. Moreover, the proposed dual-channel assay has been successfully applied to determine OTA levels in corn samples with rapid response, superior accuracy, and high anti-interference capability, providing a promising method for food safety monitoring.

Glycosylation of Receptor Binding Domain of SARS-CoV-2 S-Protein Influences on Binding to Immobilized DNA Aptamers.

Nucleic acid aptamers specific to S-protein and its receptor binding domain (RBD) of SARS-CoV-2 (severe acute respiratory syndrome-related coronavirus 2) virions are of high interest as potential inhibitors of viral infection and recognizing elements in biosensors. Development of specific therapy and biosensors is complicated by an emergence of new viral strains bearing amino acid substitutions and probable differences in glycosylation sites. Here, we studied affinity of a set of aptamers to two Wuhan-type RBD of S-protein expressed in Chinese hamster ovary cell line and Pichia pastoris that differ in glycosylation patterns. The expression system for the RBD protein has significant effects, both on values of dissociation constants and relative efficacy of the aptamer binding. We propose glycosylation of the RBD as the main force for observed differences. Moreover, affinity of a several aptamers was affected by a site of biotinylation. Thus, the robustness of modified aptamers toward new virus variants should be carefully tested.

Colorimetric immunosensor constructed using 2D metal-organic framework nanosheets as enzyme mimics for the detection of protein biomarkers.

The simple and sensitive detection of protein is of great significance in biological research and medical diagnosis. However, the commonly-used methods, such as enzyme-linked immunosorbent assay (ELISA), usually rely on signal tags labeled on the antibody, which limits the sensitivity and stability. Herein, we have designed and constructed a colorimetric immunosensor in this work for the analysis of protein by taking advantage of 2D metal-organic framework (2D-MOF) nanomaterials as enzyme mimics. The nanomaterial shows a strong peroxidase mimetic activity, and good selectivity after it is modified with a specific aptamer. Therefore, taking carcinoembryonic antigen (CEA) as an example, this immunosensor achieves a good detection performance with a linear range from 1 pg mL-1 to 1000 ng mL-1 and a limit of detection (LOD) of 0.742 pg mL-1. Moreover, the sensor can successfully distinguish the human serum of colorectal cancer patients from healthy people, which suggests that this sensor has great potential in clinical applications. More importantly, the mass production, low cost, stability and ease of transport of the MOFs nanomaterials, as well as the ability for visual detection will make this sensor suitable for point-of-care (POC) testing in remote or resource-poor areas.

Scanning Two-Dimensional Fluorescence Lifetime Correlation Spectroscopy: Conformational Dynamics of DNA Holliday Junction from Microsecond to Subsecond.

Single-molecule Förster resonance energy transfer (smFRET) is widely utilized to investigate the structural heterogeneity and dynamics of biomolecules. However, it has been difficult to simultaneously achieve a wide observation time window, a high structure resolution, and a high time resolution with the current smFRET methods. Herein, we introduce a new method utilizing two-dimensional fluorescence lifetime correlation spectroscopy (2D FLCS) and surface immobilization techniques. This method, scanning 2D FLCS, enables us to examine the structural heterogeneity and dynamics of immobilized biomolecules on a time scale from microsecond to subsecond by slowly scanning the sample stage at the rate of ∼1 µm/s. Application to the DNA Holliday junction (HJ) complex under various [Mg2+] conditions demonstrates that scanning 2D FLCS enables tracking reaction kinetics from 25 µs to 30 ms with a time resolution as high as 1 µs. Furthermore, the high structure resolution of scanning 2D FLCS allows us to unveil the ensemble nature of each isomer state and the heterogeneity of the dynamics of the HJ.

Label-Free Digital Detection of Intact Virions by Enhanced Scattering Microscopy.

Several applications in health diagnostics, food, safety, and environmental monitoring require rapid, simple, selective, and quantitatively accurate viral load monitoring. Here, we introduce the first label-free biosensing method that rapidly detects and quantifies intact virus in human saliva with single-virion resolution. Using pseudotype SARS-CoV-2 as a representative target, we immobilize aptamers with the ability to differentiate active from inactive virions on a photonic crystal, where the virions are captured through affinity with the spike protein displayed on the outer surface. Once captured, the intrinsic scattering of the virions is amplified and detected through interferometric imaging. Our approach analyzes the motion trajectory of each captured virion, enabling highly selective recognition against nontarget virions, while providing a limit of detection of 1 × 103 copies/mL at room temperature. The approach offers an alternative to enzymatic amplification assays for point-of-collection diagnostics.

An origami paper-based analytical device for DNA damage analysis.

Detection and characterization of DNA damage plays a critical role in genotoxicity testing, drug screening, and environmental health. We developed a fully integrated origami paper-based analytical device (oPAD) for measuring DNA damage. This simple device allows on-paper cell lysis, DNA extraction, terminal deoxynucleotidyl transferase dUTP nick end labeling (TUNEL) reaction and signal readout with simple operation steps, enabling rapid (within 30 min) and high throughput assessment of multiple DNA damages induced by exogenous chemical agents.

2D MOF-Based Photoelectrochemical Aptasensor for SARS-CoV-2 Spike Glycoprotein Detection.

A reliable and sensitive detection approach for SARS-CoV 2 is essential for timely infection diagnosis and transmission prevention. Here, a two-dimensional (2D) metal-organic framework (MOF)-based photoelectrochemical (PEC) aptasensor with high sensitivity and stability for SARS-CoV 2 spike glycoprotein (S protein) detection was developed. The PEC aptasensor was constructed by a plasmon-enhanced photoactive material (namely, Au NPs/Yb-TCPP) with a specific DNA aptamer against S protein. The Au NPs/Yb-TCPP fabricated by in situ growth of Au NPs on the surface of 2D Yb-TCPP nanosheets showed a high electron-hole (e-h) separation efficiency due to the enhancement effect of plasmon, resulting in excellent photoelectric performance. The modified DNA aptamer on the surface of Au NPs/Yb-TCPP can bind with S protein with high selectivity, thus decreasing the photocurrent of the system due to the high steric hindrance and low conductivity of the S protein. The established PEC aptasensor demonstrated a highly sensitive detection for S protein with a linear response range of 0.5-8 µg/mL with a detection limit of 72 ng/mL. This work presented a promising way for the detection of SARS-CoV 2, which may conduce to the impetus of clinic diagnostics.

A disposable gold foil paper-based aptasensor for detection of enteropathogenic Escherichia coli with SERS analysis and magnetic separation technology.

Rapid and sensitive detection of enteropathogenic Escherichia coli (EPEC) in fluids with complex background is an important task for safety quality control in the field of medicine, environment, and food. In this study, a gold foil paper-based aptasensor was developed for the detection of enteropathogenic EPEC O26:K60 with surface-enhanced Raman spectroscopy (SERS) and magnetic separation technology mediated by Fe3O4@Au composite. The gold foil paper was firstly modified with thiolated capture probe and SERS tag. The thiolated aptamer probe for EPEC was immobilized onto a Fe3O4@Au composite. In the presence of EPEC, highly specific recognition between the aptamer probe and EPEC made the Fe3O4@Au composite partially dissociated from the gold foil paper. This led to a decreased Raman intensity response, which showed an obvious negative linear correlation with increasing concentration of EPEC over a wide concentration range from 10 to 107 CFU/mL under an excitation wavelength of 633 nm. The detection limit was about 2.86 CFU/mL in a buffer solution and a licorice extractum and the detection time was only 2.5 h. The results demonstrate that the gold foil paper-based aptasensor can be an excellent biosensing platform that offers a reliable, rapid, and sensitive alternative for EPEC detection.

A simple "signal off-on" fluorescence nanoplatform for the label-free quantification of exosome-derived microRNA-21 in lung cancer plasma.

A simple nanoplatform based on molybdenum disulfide (MoS2) nanosheets, a fluorescence quencher (signal off), and a hybridization chain reaction (HCR) signal amplification (signal on) used for the enzyme-free, label-free, and low-background signal quantification of microRNA-21 in plasma exosome is reported. According to the sequence of microRNA-21, carboxy-fluorescein (FAM)-labeled hybridization probe 1 (FAM-H1) and hybridization probes 2 (FAM-H2) were designed with excitation maxima at 488 nm and emission maxima at 518 nm. MoS2 nanosheets could adsorb FAM-H1 and FAM-H2 and quenched their fluorescence signals to reduce the background signal. However, HCR was triggered when microRNA-21 was present. Consequently, HCR products containing a large number of FAM fluorophores can emit a strong fluorescence at 518 nm and could realize the detection of microRNA-21 as low as 6 pmol/L and had a wide linear relation of 0.01-25 nmol/L. This assay has the ability of single-base mismatch recognition and could identify microRNA-21 with high specificity. Most importantly, this approach was successfully applied to the detection of plasma exosomal microRNA-21 in patients with lung cancer, and it is proposed that other targets can also be detected by changing the FAM-H1 and FAM-H2 corresponding to the target sequence. Thus, a novel, hands-on strategy for liquid biopsy was proposed and has a potential application value in the early diagnosis of lung cancer.

Carbon nanodot-based electrogenerated chemiluminescence biosensor for miRNA-21 detection.

A simple carbon nanodot-based electrogenerated chemiluminescence biosensor is described for sensitive and selective detection of microRNA-21 (miRNA-21), a biomarker of several pathologies including cardiovascular diseases (CVDs). The photoluminescent carbon nanodots (CNDs) were obtained using a new synthesis method, simply by treating tiger nut milk in a microwave reactor. The synthesis is environmentally friendly, simple, and efficient. The optical properties and morphological characteristics of the CNDs were exhaustively investigated, confirming that they have oxygen and nitrogen functional groups on their surfaces and exhibit excitation-dependent fluorescence emission, as well as photostability. They act as co-reactant agents in the anodic electrochemiluminescence (ECL) of [Ru(bpy)3]2+, producing different signals for the probe (single-stranded DNA) and the hybridized target (double-stranded DNA). These results paved the way for the development of a sensitive ECL biosensor for the detection of miRNA-21. This was developed by immobilization of a thiolated oligonucleotide, fully complementary to the miRNA-21 sequence, on the disposable gold electrode. The target miRNA-21 was hybridized with the probe on the electrode surface, and the hybridization was detected by the enhancement of the [Ru(bpy)3]2+/DNA ECL signal using CNDs. The biosensor shows a linear response to miRNA-21 concentration up to 100.0 pM with a detection limit of 0.721 fM. The method does not require complex labeling steps, and has a rapid response. It was successfully used to detect miRNA-21 directly in serum samples from heart failure patients without previous RNA extraction neither amplification process.

A MOF-Shell-Confined I-Motif-Based pH Probe (MOFC-i) Strategy for Sensitive and Dynamic Imaging of Cell Surface pH.

Dynamic imaging of cell surface pH is extremely challenging due to the slight changes in pH and the fast diffusion of secreted acid to the extracellular environment. In this work, we construct a novel metal-organic framework (MOF)-shell-confined i-motif-based pH probe (MOFC-i) strategy that enables sensitive and dynamic imaging of cell surface pH. The CY3- and CY5-labeled i-motif, which is hybridized via its short complementary chain with two-base mismatches, is optimized for sensing at physiological pH. After efficiently anchoring the optimized pH probes onto the cell membrane with the aid of cholesterol groups, a biocompatible microporous MOF shell is then formed around the cell by cross-linking ZIF-8 nanoparticles via tannic acid. The microporous MOF shell can confine secreted acid without inhibiting the normal physiological activities of cells; thus, the MOFC-i strategy can be used to monitor dynamic changes in the cell surface pH of living cells. Furthermore, this method can not only clearly distinguish the different metabolic behaviors of cancer cells and normal cells but also reveal drug effects on the cell surface pH or metabolism, providing promising prospects in pH-related diagnostics and drug screening.

Electrochemical Microfluidic Paper-Based Aptasensor Platform Based on a Biotin-Streptavidin System for Label-Free Detection of Biomarkers.

Timely and rapid detection of biomarkers is extremely important for the diagnosis and treatment of diseases. However, going to the hospital to test biomarkers is the most common way. People need to spend a lot of money and time on various tests for potential disease detection. To make the detection more convenient and affordable, we propose a paper-based aptasensor platform in this work. This device is based on a cellulose paper, on which a three-electrode system and microfluidic channels are fabricated. Meanwhile, novel nanomaterials consisting of amino redox graphene/thionine/streptavidin-modified gold nanoparticles/chitosan are synthesized and modified on the working electrode of the device. Through the biotin-streptavidin system, the aptamer whose 5'end is modified with biotin can be firmly immobilized on the electrode. The detection principle is that the current generated by the nanomaterials decreases proportionally to the concentration of targets owing to the combination of the biomarker and its aptamer. 17ß-Estradiol (17ß-E2), as one of the widely used diagnostic biomarkers of various clinical conditions, is adopted for verifying the performance of the platform. The experimental results demonstrated that this device enables the determination of 17ß-E2 in a wide linear range of concentrations of 10 pg mL-1 to 100 ng mL-1 and the limit of detection is 10 pg mL-1 (S/N = 3). Moreover, it enables the detection of targets in clinical serum samples, demonstrating its potential to be a disposable and convenient integrated platform for detecting various biomarkers.

Controlling the Biological Fate of Liposomal Spherical Nucleic Acids Using Tunable Polyethylene Glycol Shells.

Liposomal spherical nucleic acids (LSNAs) modified with polyethylene glycol (PEG) units are studied in an attempt to understand how the circulation time and biodistribution of the constructs can be manipulated. Specifically, the effect of (1) PEG molecular weight, (2) PEG shell stability, and (3) PEG modification method (PEG in both the core and shell versus PEG in the shell only) on LSNA blood circulation, biodistribution, and in vivo cell internalization in a syngeneic, orthotopic triple-negative breast cancer mouse model is studied. Generally, high PEG molecular weight extends blood circulation lifetime, and a more lipophilic anchor stabilizes the PEG shell and improves circulation and tumor accumulation but at the cost of cell uptake efficiency. The PEGylation strategy has a minor effect on in vitro properties of LSNAs but significantly alters in vivo cell uptake. For example, surface-only PEG in one design contributed to higher in vivo cell internalization than its counterpart with PEG both in the shell and core. Taken together, this work provides guidelines for designing LSNAs that exhibit maximal in vivo cancer cell uptake characteristics in the context of a breast cancer model.

JEV-nanobarcode and colorimetric reverse transcription loop-mediated isothermal amplification (cRT-LAMP).

Nucleic acid amplification tests (NAATs) are powerful tools for the Japanese encephalitis virus (JEV). We demonstrated highly sensitive, specific, and rapid detection of JEV by colorimetric reverse-transcription loop-mediated isothermal amplification (cRT-LAMP). Under optimized conditions, the RT-LAMP assay results showed that the limit of detection was approximately equivalent to 1 RNA genome copy/µL with an assay time of 30 min. The assay was highly specific to JEV when tested with other mosquito-borne virus panels (Zika virus and dengue virus types 2-4). The ability to detect JEV directly from crude human sample matrices (serum and urine) demonstrated the suitability of our JEV RT-LAMP for widespread clinical application. The JEV RT-LAMP provides combination of  rapid colorimetric determination of true-positive JEV RT-LAMP amplicons with our recently developed JEV-nanobarcodes, measured at absorbance wavelenght of 530 (A530) and 650 (A650), which have a limit of detection of 23.3 ng/µL. The AuNP:polyA10-JEV RT-LAMP nanobarcodes exhibited superior capability for stabilizing the true-positive JEV RT-LAMP amplicons against salt-induced AuNP aggregation, which improved the evaluation of true/false positive signals in the assay. These advances enable to expand the use of RT-LAMP for point-of-care tests, which will greatly bolster JEV clinical programs. The JEV RT-LAMP nanobarcode assay targeting the envelope (E) gene and MgSO4 induced AuNP aggregation, indicated by an instant pink-to-violet colorimetric read-out.

An enhanced photoelectrochemical biosensor for colitoxin DNA based on HKUST-1/TiO2 and derived HKUST-CuO/TiO2 heterogeneous composites.

HKUST-1 MOFs and its derivative HKUST-CuO were coupled with TiO2 nanoparticles to form the heterogeneous composites of HKUST-1/TiO2 and HKUST-CuO/TiO2 based on their well-suitable bandgap energies (Eg). Compared with mono-component HKUST-1 or HKUST-CuO, the prepared composites displayed photoelectrochemical (PEC) response due to the synergistic effect from their heterogeneous structure. Higher photocurrent response was obtained on HKUST-CuO/TiO2-modified ITO electrode (HKUST-CuO/TiO2/ITO), which could be attributed to the hollow structure with a thin shell of HKUST-CuO greatly enhancing visible spectra harvesting. The CuO component in HKUST-CuO not only could accelerate electron transfer on the heterojunction interface but also effectively separate the photo-generated charge carriers (e-1/h+). Based on the excellent PEC performance of prepared photoactive composite material, under visible-light excitation (λ ≥ 420 nm) and with a working potential of 0 V (vs. Ag/AgCl), the S1 (probe DNA)/HKUST-CuO/TiO2/ITO PEC platform was successfully fabricated for colitoxin DNA detection without using ascorbic acid (AA) as an electron donor. Compared with the analysis results on S1/HKUST-1/TiO2/ITO electrode, S1/HKUST-CuO/TiO2/ITO displayed a wider linear response range from 1.0 × 10-6 to 4.0 × 10-1 nM with a lower detection limit of 3.73 × 10-7 nM (S/N = 3), the linear regression equation was ΔI (10-6 A) =0.5549-0.1858 log (CS2/M), which confirmed the HKUST-CuO could improve sensitivity because of its prominent PEC property. The relative standard deviation (RSD) of the PEC sensor for target DNA detection of 2.0 × 10-4 nM was 7.4%. The proposed DNA biosensor also possessed good specificity and stability. Hence, this reported work was a promising strategy for molecular diagnosis in the bio-analysis field. (A) Schematic illustration of the preparation process of the proposed PEC biosensors for colitoxin DNA detection. (B) The preparation process of HKUST-1 and HKUST-CuO.