Adjunctive use of different lasers Er, Cr: YSGG, femtosecond, potassium titanyl phosphate and photodynamic therapy on radicular disinfection bonded to glass fiber post.

OBJECTIVE: The aim of this study was to evaluate and compare the effect of different laser prototypes [Er, Cr: YSGG laser (ECYL), potassium titanyl phosphate laser (KTP), and Femtosecond laser (FSL)]and curcumin photosensitizer (CP) activated by Photodynamic therapy (PDT) on the bond strength of Pre-fabricated fiber reinforced composite (PFRC) post-bonded to radicular dentin. MATERIALS AND METHODS: A total of fifty mandibular single-rooted closed apex teeth were extracted carefully, assembled, and decoronated up to the cementoenamel junction. The working length of all specimens was determined by using a 10 K patency file and later, were cleaned and shaped with Protaper NiTi system using the crown down approach, dried, and obturated with gutta-percha using an AH Plus sealer. Post space was prepared by guiding peeso-reamer. Based on the method of disinfection, the samples were allocated to five groups (n=10) at random: samples in group 1: curcumin photosensitizer (CP) activated by PDT, samples in group 2 disinfected using 5.25% NaOCl+17% EDTA, samples in group 3 disinfected using 5.25% NaOCl+17% EDTA+FSL, specimens in group 4 sterilized using 5.25% NaOCl+17% EDTA+KTP and samples in group 5 cleaned with 5.25% NaOCl+17% EDTA+ECYL. The fiber post was cemented via self-etch resin cement into the post space. All specimens with posts were dissected perpendicularly into apical, middle, and coronal dentin and subjected to the universal testing machine for push-out bond strength (PBS) testing. Statistical analysis was performed using a One-Way analysis of variance and Post Hoc Tukey multiple comparison tests. RESULTS: The highest PBS was corroborated when the radicular canal was disinfected with 5.25% NaOCl +17% EDTA+ ECYL at all three root levels (coronal, middle, and apical) and the lowest was adjudicated by decontamination with CP activated by PDT at all inspected root levels. Intergroup comparison presented that specimens in group 2: 5.25% NaOCl+17% EDTA (control) and group 4: 5.25% NaOCl+17% EDTA+KTP revealed comparable PBS outcome to group 5 (p>0.05) while samples in group 3 revealed the equivalent PBS values to group 1 (p<0.05) at all three root levels. CONCLUSIONS: Er, Cr: YSGG laser and potassium titanyl phosphate laser when used in combination with the conventional canal disinfection 5.25% NaOCl and 17% EDTA demonstrated the highest push-out bond strength values at coronal, middle, and apical levels of the root.

Fluid Movement in the Apical Area Beyond the Ledge During Er:YAG Laser-Activated Irrigation: A Particle Image Velocimetry Analysis.

Objective: This study aimed to examine the irrigant flow generated by laser-activated irrigation (LAI), in comparison with ultrasonic-activated irrigation (UAI) and syringe irrigation (SI), in the area beyond the ledge using particle image velocimetry (PIV). Background data: There was no reported study about cleaning efficacy of LAI beyond the ledge. Materials and methods: Forty-nine J-shaped root canal models (40° curvature) were instrumented to no. 35/0.06, and a ledge, 2.5 mm deep, was created with no. 60/0.08 instrument at 5 mm from the apical foramen in each canal. The samples were irrigated with LAI [30 mJ/5 pulse per second (pps), 30 mJ/10 pps, 30 mJ/20 pps, 50 mJ/10 pps, 70 mJ/10 pps], UAI, and SI with a tip/needle insertion depth of 5 mm from the apical foramen (n = 7). PIV was performed with glass beads and a high-speed camera. Velocities were compared in the coronal and apical areas to the ledge, respectively. Results: In the apical area, all LAI groups and UAI produced a higher velocity than that of SI, and LAI at 30 mJ/20 pps and 70 mJ/10 pps showed significantly higher velocity than that of UAI (p < 0.05). In the coronal area, LAI at 30 mJ/20 pps generated a significantly higher velocity than that of UAI and SI (p < 0.05). Velocity was significantly slower in the apical area than in the coronal area in UAI and SI (p < 0.05), but was similar between both areas in LAI except at 30 mJ/20 pps. Conclusions: Among tested laser settings, higher velocity was significantly achieved by LAI at 30 mJ/20 pps and 70 mJ/10 pps compared with UAI in the canal area beyond the ledge. SI generated lower fluid movement than LAI and UAI in both canal regions.

Effect of different laser-assisted irrigation activation techniques on apical debris extrusion.

Objective: The aim of this study was to compare apical debris extrusion when neodymium-doped yttrium aluminium garnet (Nd:YAG) lasers, erbium-doped yttrium aluminium garnet (Er:YAG) or photon-induced photoacoustic streaming (PIPS) are used for irrigation activation.Materials and methods: A total of 60 extracted human mandibular premolar teeth have similar dimensions were included and the samples were split into four groups according to the irrigation technique (n = 15): conventional needle irrigation, PIPS, Er:YAG and Nd:YAG. ProTaper Universal system up to F4 was used for root canal instrumentation. Bidistilled water was used as an irrigation solution during instrumentation and irrigation activation. Apically extruded debris was collected into preweighed Eppendorf tubes during instrumentation and irrigation activation procedures. The tubes were then kept in an incubator at 70 °C for 5 days. The initial weight of the tube was subtracted from the final weight and the result was recorded as the weight of dry extruded debris. The data were evaluated statistically using a one-way ANOVA test followed by least significant difference post hoc test (p < .05).Results: Conventional needle irrigation caused significantly less debris extrusion than laser-assisted irrigation activation groups (p < .05). Laser-assisted irrigation activation groups caused statistically similar debris extrusion (p > .05).Conclusion: Laser-assisted irrigation activation techniques caused more debris extrusion when compared to conventional needle irrigation.

Influence of photobiomodulation therapy on root development of rat molars with open apex and pulp necrosis.

This study aimed to evaluate the role of photobiomodulation (PBM) in apexification and apexogenesis of necrotic rat molars with an open apex. Rat molars were exposed to the oral environment for 3 weeks. Canals were rinsed with 2.5% NaOCl and 17% EDTA, filled with antibiotic paste and sealed. After 7 days, canals were rinsed and divided into six groups (n=6): mineral trioxide aggregate (MTA); blood clot (BC); human dental pulp stem cells (hDPSC); MTA+PBM; BC+PBM; and hDPSC+PBM. In hDPSC groups, a 1% agarose gel scaffold was used. Two groups were not exposed: healthy tooth+PBM (n = 6), healthy tooth (n = 3); and one was exposed throughout the experiment: necrotic tooth (n = 3). In PBM groups, irradiation was performed with aluminum gallium indium phosphide (InGaAlP) diode laser for 30 days within 24-h intervals. After that, the specimens were processed for histological and immunohistochemical analyses. Necrotic tooth showed greater neutrophil infiltrate (p < 0.05). Necrotic tooth, healthy tooth, and healthy tooth+PBM groups showed absence of a thin layer of fibrous condensation in the periapical area. All the other groups stimulated the formation of a thicker layer of fibers (p < 0.05). All groups formed more mineralized tissue than necrotic tooth (p < 0.05). PBM associated with MTA, BC, or hDPSC formed more mineralized tissue (p < 0.05). MTA+PBM induced apexification (p < 0.05). Rabbit polyclonal anti-bone sialoprotein (BSP) antibody confirmed the histological findings of mineralized tissue formation, and hDPSC groups exhibited higher percentage of BSP-positive cells. It can be concluded that PBM improved apexification and favored apexogenesis in necrotic rat molars with an open apex.

Influence of photobiomodulation therapy on root development of rat molars with open apex and pulp necrosis

Abstract This study aimed to evaluate the role of photobiomodulation (PBM) in apexification and apexogenesis of necrotic rat molars with an open apex. Rat molars were exposed to the oral environment for 3 weeks. Canals were rinsed with 2.5% NaOCl and 17% EDTA, filled with antibiotic paste and sealed. After 7 days, canals were rinsed and divided into six groups (n=6): mineral trioxide aggregate (MTA); blood clot (BC); human dental pulp stem cells (hDPSC); MTA+PBM; BC+PBM; and hDPSC+PBM. In hDPSC groups, a 1% agarose gel scaffold was used. Two groups were not exposed: healthy tooth+PBM (n = 6), healthy tooth (n = 3); and one was exposed throughout the experiment: necrotic tooth (n = 3). In PBM groups, irradiation was performed with aluminum gallium indium phosphide (InGaAlP) diode laser for 30 days within 24-h intervals. After that, the specimens were processed for histological and immunohistochemical analyses. Necrotic tooth showed greater neutrophil infiltrate (p < 0.05). Necrotic tooth, healthy tooth, and healthy tooth+PBM groups showed absence of a thin layer of fibrous condensation in the periapical area. All the other groups stimulated the formation of a thicker layer of fibers (p < 0.05). All groups formed more mineralized tissue than necrotic tooth (p < 0.05). PBM associated with MTA, BC, or hDPSC formed more mineralized tissue (p < 0.05). MTA+PBM induced apexification (p < 0.05). Rabbit polyclonal anti-bone sialoprotein (BSP) antibody confirmed the histological findings of mineralized tissue formation, and hDPSC groups exhibited higher percentage of BSP-positive cells. It can be concluded that PBM improved apexification and favored apexogenesis in necrotic rat molars with an open apex.

Light curing resin cements containing iodonium salts promote suitable apical bonding of posts to radicular dentin.

The aim of this study was to analyze the efficiency of experimental light-curing resin cements (ERCs) with a ternary photo-initiator system containing diphenyliodonium hexafluorphosphate (DPI) and different amines on retention of glass-fiber posts to dentin (GFP). ERCs formulations: a 1:1 mass ratio of 2,2-bis[4-(2-hydroxy-3-methacryloxypropoxy)phenylpropane and triethyleneglycol dimethacrylate. Camphorquinone was used as initiator. Six experimental groups were established according to the amine used: [ethyl-4-(dimethylamino)benzoate-EDMAB or 2-(dimethylamino)ethyl methacrylate-DMAEMA] and the concentration of DPI (0, 0.5 mol%, 1 mol%). The resin cements Variolink II (dual- and light-cured versions) were used as commercial reference. Eighty recently extracted bovine incisors (n = 10) were selected for this study. The roots were prepared and the fiber posts were cemented with the resin cement specified for each experimental group. Specimens from coronal, middle, and apical thirds of the root were subjected to push-out bond strength test 24 hours after bonding. Data were subjected to split-plot ANOVA and the Tukey test (p = 0.05). ERCs containing DPI showed statistically significant higher bond strengths compared with ERCs without DPI. ERCs containing DPI were statistically similar to VARIOLINK II - dual-cured and superior to VARIOLINK II - light-cured (except for EDMAB - 1DPI in the medium third and DMAEMA - 1DPI in the coronal third). Different amines did not influence post retention. The apical root region showed the lowest bond strength for the groups EDAB-0DPI, DMAEMA-0DPI and VARIOLINK II light-cured. Light-cured ERCs containing DPI were efficient for GFP retention to radicular dentin, with similar behaviour to that of dual-curing commercial resin cement.

Low-level laser therapy increases interleukin-1ß in gingival crevicular fluid and enhances the rate of orthodontic tooth movement.

INTRODUCTION: The aim of this investigation was to evaluate the effects of low-level laser therapy on interleukin-1ß (IL-1ß) levels in gingival crevicular fluid and its correlation with orthodontic tooth movement. METHODS: A split-mouth design was used in 10 subjects (6 female, 4 male) aged 14 to 25 years, whose maxillary first premolars were extracted. A gallium-aluminum-arsenide semiconductor diode laser (wavelength, 940 nm; energy density, 8 J/cm2; power output, 100 mW) delivered low-level laser therapy to the experimental canine undergoing distalization at 10 points. The control canine was distalized without low-level laser therapy. The experimental and control canines were distalized using a force of 150 g provided by nickel-titanium closed-coil springs. Gingival crevicular fluid was collected at 5 time points from the control and experimental sides, and the levels of IL-1ß were analyzed by enzyme-linked immuno-sorbent assay (ELISA). The distal movements of the maxillary canines were measured and compared. RESULTS: Increased levels of IL-1ß were observed in the experimental canines compared with the control canines (P <0.001). Cumulative tooth movements over an 8-week experimental period were greater for the experimental canines (occlusogram and software, 4.450 and 4.4903 mm, respectively) compared with the control canines (occlusogram and software, 2.025 and 2.0501 mm, respectively). A positive correlation existed between the IL-1ß levels and the amounts of tooth movement across all time intervals. CONCLUSIONS: In combination with light orthodontic force, application of low-level laser therapy increased the levels of IL-1ß in gingival crevicular fluid and accelerated orthodontic tooth movement.

Light curing resin cements containing iodonium salts promote suitable apical bonding of posts to radicular dentin

Abstract The aim of this study was to analyze the efficiency of experimental light-curing resin cements (ERCs) with a ternary photo-initiator system containing diphenyliodonium hexafluorphosphate (DPI) and different amines on retention of glass-fiber posts to dentin (GFP). ERCs formulations: a 1:1 mass ratio of 2,2-bis[4-(2-hydroxy-3-methacryloxypropoxy)phenylpropane and triethyleneglycol dimethacrylate. Camphorquinone was used as initiator. Six experimental groups were established according to the amine used: [ethyl-4-(dimethylamino)benzoate-EDMAB or 2-(dimethylamino)ethyl methacrylate-DMAEMA] and the concentration of DPI (0, 0.5 mol%, 1 mol%). The resin cements Variolink II (dual- and light-cured versions) were used as commercial reference. Eighty recently extracted bovine incisors (n = 10) were selected for this study. The roots were prepared and the fiber posts were cemented with the resin cement specified for each experimental group. Specimens from coronal, middle, and apical thirds of the root were subjected to push-out bond strength test 24 hours after bonding. Data were subjected to split-plot ANOVA and the Tukey test (p = 0.05). ERCs containing DPI showed statistically significant higher bond strengths compared with ERCs without DPI. ERCs containing DPI were statistically similar to VARIOLINK II - dual-cured and superior to VARIOLINK II - light-cured (except for EDMAB - 1DPI in the medium third and DMAEMA - 1DPI in the coronal third). Different amines did not influence post retention. The apical root region showed the lowest bond strength for the groups EDAB-0DPI, DMAEMA-0DPI and VARIOLINK II light-cured. Light-cured ERCs containing DPI were efficient for GFP retention to radicular dentin, with similar behaviour to that of dual-curing commercial resin cement.

Effect of Laser Energy and Tip Insertion Depth on the Pressure Generated Outside the Apical Foramen During Er:YAG Laser-Activated Root Canal Irrigation.

OBJECTIVE: The risk of extrusion of irritative irrigants into the extraradicular tissue should be minimized during root canal irrigation. This study aimed to examine the pressure generated outside the apex during Er:YAG laser-activated irrigation (LAI) in comparison with passive ultrasonic irrigation (PUI) and conventional syringe irrigation (SI). BACKGROUND DATA: LAI is reported to be efficient for root canal debridement, whereas the apical pressure generated during LAI has not been investigated in detail. METHODS: Plastic root canal models (apical diameter = 0.40 mm, taper = 6%, and length = 20 mm) were irrigated with water using either LAI with an Er:YAG laser (Erwin AdvEr; 30, 50, or 70 mJ, 10 pps), PUI, or SI. The tip insertion depth was set at 2, 5, or 10 mm from the apex. The pressure generated outside the apical foramen was measured with a pressure sensor connected to the apex of the model. RESULTS: When the tip was positioned at 2 mm and the power setting was changed, the mean maximum pressure values were LAI (30 mJ) = PUI < LAI (70 mJ) < SI (p < 0.05). When LAI was performed at 70 mJ and the tip was positioned at 5 or 10 mm, the pressure values were PUI < LAI = SI (p < 0.05). CONCLUSIONS: LAI generated similar or lower pressure outside the apical foramen compared with SI, irrespective of the laser energy and tip insertion depth examined. However, LAI generated higher pressure compared with PUI.

Lasers in Apicoectomy: A Brief Review.

Since the invention of laser, various applications for lasers in endodontics have been proposed, such as disinfection of the root canal system, canal shaping, pulp diagnosis, and apico-ectomy. One of the major applications of laser in endodontics is apicoectomy. The aim of this article is to review the benefits and drawbacks of laser applications in apicoectomy, including effect on apical seal, effect on dentin permeability, effect on postsurgery pain, effect on crack formation, effect on root-end morphology, effect on treatment outcome, and connective tissue response to laser-treated dentin.

Efficacy of Laser Activated Irrigation on Apically Extruded Debris with Different Preparation Systems.

OBJECTIVE: The aim of this study was to evaluate apical extrusion of debris in canals prepared with three nickel-titanium (NiTi) rotary file systems [Twisted File Adaptive (TFA), SybronEndo, Orange, CA], Reciproc [(RP), VDW, Munich, Germany], and Revo-S [(RS), MicroMega, Besançon, France] and two irrigation [conventional needle (CNI) and laser-activated (LAI)] techniques. BACKGROUND DATA: Although previous studies have evaluated the amount of apically extruded debris by various instrumentation and irrigation methods, none of them have investigated the effect of LAI during the root canal preparation on debris extrusion. METHODS: Ninety extracted single-rooted human mandibular premolars with straight canals were randomly assigned to six groups (n=15) according to the file and irrigation protocols used: (1) TFA and LAI group, (2) RP and LAI group, (3) RS and LAI group, (4) TFA and CNI group, (5) RP and CNI group, and (6) RS and CNI group. Debris extruded from the apical foramen during root canal preparation was collected into preweighed Eppendorf tubes. The weight of the dry extruded debris was established by subtracting the preinstrumentation and postinstrumentation weight of the Eppendorf tubes for each group. Data were analyzed using the Kruskal Wallis and Mann Whitney U tests with Bonferroni correction to compare groups. RESULTS: LAI groups extruded more debris than CNI groups (p<0.05). However, no statistically significant differences were observed among the file groups when each irrigation method was evaluated separately (p>0.017). CONCLUSIONS: Within the limitations of this study, it can be concluded that the agitation method, such as LAI, had a significant effect on the amount of extrusion.

Effect of low-level laser therapy on dental root cementum remodeling in rats.

OBJECTIVE: To investigate the amount of the cementum layer formed over the rat's dental root surfaces by daily application of low-level laser therapy (LLLT) for 2 weeks. METHODS: Twelve female Sprague-Dawley (SD) rats were divided into two groups: six rats received daily LLLT (Ga-Al-As, 830 nm), and six rats received no treatment (control). The treatment lasted 2 weeks. In vivo Micro-CT imaging analyzed the root's hard tissue volumetric changes. The cementum thickness was evaluated histologically. RESULTS: Total cementum thicknesses in the LLLT group increased significantly (p = 0.015) compared to the control group. This significant increase in the cementum thickness, verified histologically, was not detectable during in vivo Micro-CT imaging, which showed no significant difference between the groups regarding the root hard tissues volumetric changes over the 2-week evaluation period. CONCLUSION: Two weeks of daily application of LLLT significantly increased rat's dental root cementum thickness as determined histologically. However, in vivo Micro-CT imaging failed to accurately reveal this cementum growth as it was not possible to differentiate dentinal changes.

Effect of the Nd:YAG laser on sealer penetration into root canal surfaces: a confocal microscope analysis.

OBJECTIVES: The objective of this in vitro study was to evaluate the use of the Neodymium:Yttrium-Aluminium-Garnet (Nd:YAG) laser as part of the root canal treatment on the penetration of sealer into dentinal tubules. METHODS: Eighty extracted lower premolars were randomly assigned to two groups (n=40 each): Control group (CG), subjected to a conventional protocol of endodontic instrumentation and obturation; and Laser group (LG), in which Nd:YAG laser irradiations were combined with conventional preparation and obturation. Endodonted samples were sectioned at 3 and 5 mm from the apex and observed under a confocal scanning microscope (CLSM). The penetration depth into the dentinal tubules and the extension of the intracanal perimeter infiltrated by sealer were measured. The Student-Newman-Keuls test was run for between-group comparisons (α=.05). RESULTS: The depth of sealer penetration into dentinal tubules did not differ among groups. LG samples showed the significantly highest percentage of penetrated perimeter at 3 mm from the root apex. Within each group, the greatest depth of penetration (P=.0001), and the major percentage of penetrated perimeter (P<.001), were recorded at 5 mm. CONCLUSIONS: The application of the Nd:YAG laser after instrumentation did not improve the depth of sealer penetration into the dentinal tubules. The laser enlarged the total penetrable perimeter near the apex. CLINICAL SIGNIFICANCE: The Nd:YAG laser may be an appropriate complement in root canal treatment, as it enhances the sealer adaptation to the dentinal walls in the proximity of the apex.

Nd:YAG laser irradiation effect on apical intracanal dentin - a microleakage and SEM evaluation.

The purpose of this in vitro study was to evaluate the effect of neodymium:yttrium-aluminum-garnet (Nd:YAG) laser irradiation on intracanal dentin surface by SEM analysis and its interference in the apical seal of filled canals. After endodontic treatment procedures, 34 maxillary human incisors were randomly assigned to 2 groups. In the negative control group (n=17), no additional treatment was performed and teeth were filled with vertically condensed gutta-percha; in the laser-treated group (n=17), the root canals were irradiated with Nd:YAG laser (1.5 W, 100 mJ, 15 Hz) before filling as described for the control group. Two specimens of each group were prepared for SEM analysis to evaluate the presence and extent of morphological changes and removal of debris; the other specimens were immersed in 0.5% methylene blue dye (pH 7.2) for 24 h for evaluation of the linear dye leakage at the apical third. SEM analysis of the laser-treated group showed dentin fusion and resolidification without smear layer or debris. The Student's t-test showed that the laser-treated group had significantly less leakage in apical third than the control group. Within the limitations of this study, it may be concluded that the morphological changes on the apical intraradicular dentin surface caused by Nd:YAG laser resulted in less linear dye apical leakage.

Apical microleakage and SEM analysis of dentin surface after 980 nm diode laser irradiation.

This study evaluated the effect of 980-nm diode laser on apical microleakage and intraradicular dentin morphology. Roots of 110 mandibular incisors were used in the study: 92 for microleakage test and 18 for scanning electron microscopy (SEM). Roots were randomly assigned to 3 groups according to the irrigating solution (water, NaOCl and NaOCl/EDTA) and were divided into 3 subgroups according to the laser irradiation protocol (without irradiation, irradiated at 1.5 W and irradiated at 3.0 W). Two specimens of each subgroup were prepared for SEM. The remaining roots were filled with AH Plus and gutta-percha. Apical leakage was assessed by ink penetration and data were analyzed statistically by ANOVA and Tukey-Krammer test (α=0.05). SEM analysis showed intensification of changes with increase of laser power as well as variations according to the irrigating solution. Modified smear layer was observed in specimens treated with water and irradiated with laser. Roots irrigated with NaOCl/EDTA had lower levels of infiltration (0.17 ± 0.18 mm) differing significantly (p<0.05) from those of roots irrigated with water (0.34 ± 0.30 mm), but similar (p>0.05) to those irrigated with NaOCl (0.28 ± 0.29 mm). Non-irradiated roots had lower levels of infiltration (0.10 ± 0.14 mm), differing (p<0.05) from those irradiated at 1.5 W (0.32 ± 0.22 mm) and 3.0 W (0.37 ± 0.32 mm). The 980 nm diode laser modified dentin morphology and increased apical microleakage.

The effect of a 980 nm diode laser with different parameters of irradiation on the bond strength of fiberglass posts.

The aim of this study was to assess bond strength of fiberglass posts to root canal dentin irradiated with a 980 nm diode laser at different parameters of power and frequency. Fifty human maxillary canines were separated into five groups (n = 10) according to the following parameters of laser power and frequency: Group 1 (1.5 W/100 Hz), Group 2 (1.5 W/continuous wave [CW]), Group 3 (3.0 W/100 Hz), Group 4 (3.0 W/CW), and Group 5 (no irradiation). Following post cementation, samples underwent a push-out test (0.5 mm/min); next, fracture analysis was performed with a light microscope at 50x and 100x magnification. All of the irradiated groups had increased bond strength values compared to the nonirradiated group. Groups 1 and 2 demonstrated the highest bond strength values; however, statistically significant differences were observed for only the cervical third of Group 4 and the cervical/apical thirds of Group 5. Fracture analysis showed a predominance of mixed failures for Groups 1 and 2 and adhesive failures between dentin and cement for the other groups.

Nd:YAG laser irradiation effect on apical intracanal dentin - a microleakage and SEM evaluation

The purpose of this in vitro study was to evaluate the effect of neodymium:yttrium-aluminum-garnet (Nd:YAG) laser irradiation on intracanal dentin surface by SEM analysis and its interference in the apical seal of filled canals. After endodontic treatment procedures, 34 maxillary human incisors were randomly assigned to 2 groups. In the negative control group (n=17), no additional treatment was performed and teeth were filled with vertically condensed gutta-percha; in the laser-treated group (n=17), the root canals were irradiated with Nd:YAG laser (1.5 W, 100 mJ, 15 Hz) before filling as described for the control group. Two specimens of each group were prepared for SEM analysis to evaluate the presence and extent of morphological changes and removal of debris; the other specimens were immersed in 0.5 percent methylene blue dye (pH 7.2) for 24 h for evaluation of the linear dye leakage at the apical third. SEM analysis of the laser-treated group showed dentin fusion and resolidification without smear layer or debris. The Student’s t-test showed that the laser-treated group had significantly less leakage in apical third than the control group. Within the limitations of this study, it may be concluded that the morphological changes on the apical intraradicular dentin surface caused by Nd:YAG laser resulted in less linear dye apical leakage.

Apical microleakage and SEM analysis of dentin surface after 980 nm diode laser irradiation

This study evaluated the effect of 980-nm diode laser on apical microleakage and intraradicular dentin morphology. Roots of 110 mandibular incisors were used in the study: 92 for microleakage test and 18 for scanning electron microscopy (SEM). Roots were randomly assigned to 3 groups according to the irrigating solution (water, NaOCl and NaOCl/EDTA) and were divided into 3 subgroups according to the laser irradiation protocol (without irradiation, irradiated at 1.5 W and irradiated at 3.0 W). Two specimens of each subgroup were prepared for SEM. The remaining roots were filled with AH Plus and gutta-percha. Apical leakage was assessed by ink penetration and data were analyzed statistically by ANOVA and Tukey-Krammer test (α=0.05). SEM analysis showed intensification of changes with increase of laser power as well as variations according to the irrigating solution. Modified smear layer was observed in specimens treated with water and irradiated with laser. Roots irrigated with NaOCl/EDTA had lower levels of infiltration (0.17 ± 0.18 mm) differing significantly (p<0.05) from those of roots irrigated with water (0.34 ± 0.30 mm), but similar (p>0.05) to those irrigated with NaOCl (0.28 ± 0.29 mm). Non-irradiated roots had lower levels of infiltration (0.10 ± 0.14 mm), differing (p<0.05) from those irradiated at 1.5 W (0.32 ± 0.22 mm) and 3.0 W (0.37 ± 0.32 mm). The 980 nm diode laser modified dentin morphology and increased apical microleakage.

Este estudo avaliou o efeito do laser de diodo 980 nm na microinfiltração apical e na morfologia intrarradicular da dentina. Raízes de 110 incisivos inferiores foram utilizadas no estudo: 92 para o teste de microinfiltração e 18 para microscopia eletrônica de varredura (MEV). As raízes foram divididas em 3 grupos de acordo com a solução irrigante (água, NaOCl e NaOCl/EDTA) e subdivididas em 3 de acordo com a irradiação laser (sem irradiação, irradiados com 1,5 W e irradiados com 3,0 W). Duas amostras de cada subgrupo foram preparadas para MEV. As raízes restantes foram preenchidas com AH Plus e guta percha. A infiltração apical foi avaliada nas raízes por meio da penetração do corante e os dados foram analisados por ANOVA e teste de Tukey-Krammer (α=0,05). Os resultados da MEV mostraram intensificação das mudanças quando se aumentou a potência do laser e variações de acordo com a solução irrigadora. Camada de smear modificada foi observada em espécimes tratados com água e irradiados com laser. Raízes irrigadas com NaOCl/EDTA tiveram níveis menores de infiltração (0,17 ± 0,18 mm) estatisticamente diferente (p<0,05) das raízes irrigadas com água (0,34 ± 0,30 mm), mas semelhante (p>0,05) aos irrigados com NaOCl (0,28 ± 0,29 mm). As raízes não irradiadas tiveram níveis menores de infiltração (0,10 ± 0,14 mm), diferente (p<0,05) de 1,5 W (0,32 ± 0,22 mm) e 3.0 W (0,37 ± 0,32 mm). O laser de diodo 980 nm alterou a morfologia da dentina e aumentou a infiltração marginal apical.

Dentin strain induced by laser irradiation.

The purpose of this study was to investigate the strain and temperature change in dentin induced by laser irradiation of human root canals with or without water cooling. Twenty-eight palatal roots of extracted human maxillary first molars were used. The strain in dentin was measured using strain gauges fixed on the apical third of the buccal root surface. The temperature change of the root dentin was monitored using thermocouples embedded into dentin near the apex. The root canal was irradiated with Er:YAG or Nd:YAG laser at an output of 1 W (100 mJ, 10 pps) for 5 s. The tip of the irradiation fibre was located 2.0 mm from the root apex. With water cooling, the mean maximum strain induced by Er:YAG laser was significantly lower than that by Nd:YAG laser (P < 0.05). However, without water cooling, no significant difference between the two lasers (P > 0.05) was found. The results suggest that the strain induced by Er:YAG laser irradiation in dentin with water cooling may be minimal, but there still might be a risk of root micro-fracture if cooling is not sufficient.

Morphological assessment of dentine and cementum following apicectomy with Zekrya burs and Er:YAG laser associated with direct and indirect Nd:YAG laser irradiation.

OBJECTIVES: This study aimed to assess the apical surface morphology of maxillary central incisors resected 3.0 mm from the tooth apex using Zekrya burs or Er:YAG laser, with or without subsequent direct Nd:YAG laser irradiation (apical and buccal surfaces) and indirect irradiation (palatal surface). STUDY DESIGN: Forty maxillary central incisors were instrumented and obturated. The roots were divided into 4 groups according to the root resection method (Zekrya bur or Er:YAG laser - 1.8 W, 450 mJ, 4 Hz, 113 J/cm(2)) and further surface treatment (none or Nd:YAG laser - 2.0 W, 100 mJ, 20 Hz, 124 J/cm(2)). The teeth were prepared for SEM analysis. Scores ranging from 1 to 4 were attributed to cut quality and morphological changes. The data were analyzed by the Kruskal-Wallis test and by Dunn's test. RESULTS: SEM images showed irregular surfaces on the apical portions resected with Zekrya burs, with smear layer and grooves in the resected dentine and slight gutta-percha displacement and plasticization. On the other hand, apicectomies carried out with Er:YAG laser showed morphological changes compatible with ablated dentine, with rough surfaces and craters. In spite of the presence of plasticized gutta-percha, with the presence of bubbles, an irregular adaptation of the filling material to the root walls was also observed. Direct Nd:YAG laser irradiation of the apical and buccal surfaces of the resected roots resulted in areas of resolidification and fusion in the dentine and cementum, with a vitrified aspect; indirect Nd:YAG laser irradiation of the palatal surfaces yielded a lower number of changes in the cementum, with irregular resolidification areas. CONCLUSIONS: There were no differences in terms of cut quality between the use of burs and Er:YAG laser or between the 2 surfaces (apical and buccal) treated with Nd:YAG laser with direct irradiation. However, morphological changes were significantly less frequent on surfaces submitted to indirect irradiation (palatal) when compared with those directly irradiated.