Efficacy of seventh generation bonding agents as desensitizers in patients with dentin hypersensitivity: a randomized clinical trial.

BACKGROUND: Dentin hypersensitivity (DH) is one of the most challenging and persistent dental complaints characterized by transient, intense pain triggered by various stimuli. It affects a significant portion of the global population, predominantly those aged 20-40. This study aims to evaluate the desensitizing efficacy of seventh-generation dentin bonding agents (Single Bond Universal by 3 M ESPE and Xeno-V + by Dentsply) against a control group using Bifluorid 12 by Voco in mitigating DH within a month of the follow-up period. METHODS: This was a single-center, parallel-group, double-blind, controlled randomized clinical trial conducted at Dow University of Health Sciences, Karachi, Pakistan. A total of 105 patients with DH were allocated into three groups for this study. The patients were divided into three groups (Single Bond Universal by 3 M ESPE and Xeno-V + by Dentsply) and the control group containing fluoride varnish (Bifluorid 12 by Voco). Discomfort Interval Scale scores and Schiff Cold Air Sensitivity Scale scores were recorded at baseline, immediately after the intervention, after 01 weeks, and after 01 month. RESULTS: All the materials demonstrated a statistically significant reduction in discomfort and sensitivity (DIS scores p-value 0.01) immediately after 01 week and over a period of 01 month after treatment compared with the baseline scores before application, with no single material proving superior over the one-month observation period. The study also provided insights into dental hygiene practices, with a significant majority using a toothbrush and sensitivity patterns, with cold stimuli being the most common cause of sensitivity. CONCLUSION: The study demonstrates that Single Bond Universal, Xeno V+, and Bifluorid 12 are equally effective in reducing dentin hypersensitivity, with no distinct superiority observed over a one-month period. The findings highlight the potential of fluoride varnishes as a less technique-sensitive and cost-effective option for treating DH, offering valuable insights for future research and clinical practice. TRIAL REGISTRATION: NCT04225247 ( https://clinicaltrials.gov/study/NCT04225247 ), Date of Registration: 13/01/2020. (Retrospectively registered).

Prolonged polymerization of a universal adhesive in non-carious cervical lesions: 36-month double-blind randomized clinical trial.

OBJECTIVE: To evaluate the effect of prolonged (P) polymerization time of a universal adhesive system applied in etch-and-rinse (ER) or self-etch (SE) strategies on the clinical performance of restorations in non-carious cervical lesions (NCCLs), after 36 months of clinical service. METHODS: A total of 140 restorations were randomly placed in 35 subjects according to the polymerization time groups: ER (10 s); ER-P (40 s); SE (10 s); and SE-P (40 s) at 1,200 mW/cm2. Composite resin was placed incrementally. The restorations were evaluated immediately and after 6, 12, 18, and 36 months using the FDI criteria. Data were analyzed using the Kaplan-Meier survival test for retention loss, and the Kruskal-Wallis' test for secondary outcomes (α = 0.05). RESULTS: After 36 months, 19 restorations were lost: ER 6, ER-P 2, SE 9, SE-P 2. The retention rates were 82.3% for ER; 94.1 % for ER-P; 73.5 % for SE; and 94.1 % for SE-P, with a significant difference between ER vs. ER-P and SE vs. SE-P, as well as ER vs. SE-P and ER-P vs. SE (p < 0.0001). Minor defects were observed in 18 restorations for the marginal staining criteria: ER 5, ER-P 2, SE 8, SE-P 3; and in 33 restorations for the marginal adaptation criteria: ER 11, ER-P 4, SE 12, and SE-P 6 (p > 0.05). No restorations showed recurrence of caries or postoperative sensitivity. CONCLUSIONS: A prolonged polymerization time of 40 s improves the clinical performance of the universal adhesive for both adhesive strategies evaluated, even after 36 months. CLINICAL SIGNIFICANCE: Prolonging the polymerization time of a universal adhesive from 10 to 40 s has been shown to improve its clinical performance when used in NCCLs.

Formulating an altered dentin substrate to improve dentin bonding.

STATEMENT OF PROBLEM: Secondary caries is a major factor in the failure of dental restorations. However, studies on the fabrication of acid-resistant and antibacterial dentin to improve dentin bonding are sparse. PURPOSE: The purpose of this in vitro study was to compare the effects of 2 types of fluoride-containing etchants on dentin bonding and explore the feasibility of formulating an altered dentin substrate to improve dentin bonding. MATERIAL AND METHODS: NaF-containing and SnF2-containing etchants were developed by adding sodium fluoride and stannous fluoride to a 35% phosphoric acid aqueous solution. Two groups (N1 and N2) containing NaF, 10 and 30 mg/mL respectively, and 2 groups (S1 and S2) containing SnF2, 18.6 and 55.8 mg/mL respectively, were formulated. The etchant of the control group (C) was 35% phosphoric acid gel. Scanning electron microscopy (SEM), energy dispersive spectrometry (EDS), Fourier transform infrared spectroscopy (FTIR), microhardness, antierosion, and antibacterial tests were performed on the treated dentin. Moreover, the microtensile bond strength (µTBS) of each group was tested, and the fracture mode was determined after testing. Statistical analysis was performed with the 2-way ANOVA test (α=.05). RESULTS: The exposed collagen fiber was observed in group C, and minerals were formed on the dentin in the experimental groups. SEM, FTIR, and the microhardness test indicated more remineralization in the SnF2-containing etchant groups. The µTBS of S1 (77.5 ±10.36 MPa) was the highest in all groups, and group C (38.5 ±9.01 MPa) was the lowest. Moreover, the antierosion and antibacterial properties of the S2 group were the best among all groups (P<.05). CONCLUSIONS: Compared with NaF-containing etchant, SnF2-containing etchant could improve the dentin substrate, increase remineralization, improve bonding strength, and enhance antibacterial ability, especially by increasing resistance to acid erosion.

Marginal Integrity of Simplified Adhesive Strategies in Primary Teeth.

OBJECTIVE: The aim of this research was to investigate the effect of simplified adhesive strategies (self-etch vs selective enamel etch and 10- vs 20-second adhesive application time) on the marginal integrity in primary molars. METHODS: Forty deep class-II cavities were prepared in 40 extracted primary molars. The molars were divided into 4 groups based on the applied universal adhesive strategy as follows: groups 1 and 2: selective enamel etch with 20- or 10-second application time and groups 3 and 4: self-etch with 20- or 10-second application time. All cavities were restored with a sculptable bulk-fill composite restoration. The restorations underwent a thermomechanical loading (TML, 5-50 °C, 2-minute dwelling time, ×1000; 400,000 loading cycles, 1.7 Hz, 49 N). Marginal analysis before and after TML was conducted with scanning electron microscopy and the marginal integrity of each restoration was calculated as a percentage of continuous margins. A beta regression model was adopted to statistically analyse the data with a consequent pairwise comparison. RESULTS: The mean marginal integrity (% ± SD) of the restorations for each tested adhesive strategy after TML was as follows: selective enamel etch/20 seconds = 85.4 ± 3.9, self-etch/20 seconds = 85.3 ± 5.2, self-etch/10 seconds = 80.1 ± 8.2, and selective enamel etch/10 seconds = 80.0 ± 8.5. The difference between both adhesive strategies was not statistically significant at the same application time. The difference between both application times within the same adhesive strategy was statistically significant (P ≤ .01). CONCLUSIONS: Universal adhesives applied either in selective enamel etch or in self-etch mode result in comparable marginal integrities when restoring class-II cavities in primary molars. Shortened adhesive application time (10 seconds) could lead to a reduction in the marginal integrity in comparison to the recommended application time of 20 seconds.

Does Acid Etching Influence the Adhesion of Universal Adhesive Systems in Noncarious Cervical Lesions? A Systematic Review and Meta-analysis.

OBJECTIVE: To evaluate the adhesion of universal adhesive systems to the dentin of noncarious cervical lesions (NCCLs) by comparing the etch-and-rinse and self-etch strategies through a systematic review and meta-analysis. METHODS: Systematic electronic searches were performed by two independent reviewers into the following databases: PubMed/MEDLINE, Scopus, Web of Science, and Cochrane Library until December of 2021. Only randomized clinical trials were selected, comparing etch-and-rinse and self-etch strategies and using universal adhesive systems in NCCLs. This systematic review was conducted according to the PRISMA guidelines and registered into PROSPERO. RESULTS: After the removal of duplicates, 170 articles were identified. In an initial screening of titles and abstracts, 146 records did not satisfy the inclusion criteria and were, therefore, excluded. Twenty-four studies were eligible for evaluation of the full text, and four were excluded after this step. Finally, 20 randomized clinical trials were included in this systematic review and meta-analysis. CONCLUSION: This systematic review and meta-analysis revealed that applying universal adhesive systems in the etch-and-rinse strategy could lead to better medium-term (>12 to 36 months) retention of NCCL restorations than the self-etch strategy, as well as resulting in lower percentages of marginal discoloration, marginal adaptation, and secondary caries. However, the use of a self-etching strategy can lead to lower postoperative sensitivity.

Bond strength comparison among 10-MDP-containing and non-10-MDP-Containing adhesives in different degrees of dental fluorosis / Comparación de fuerza de unión entre adhesivos que contienen y no contienen 10-MDP en diferentes grados de fluorosis dental

Dental fluorosis can cause changes in the enamel surface, conditioning its functionality and esthetics. The application of dental adhesives is a treatment option; however, their use on fluorotic teeth can result in limitations. The aim of this study was to compare the shear bond strength of two different adhesives, one with 10-MDP and one without 10-MDP, in different degrees of dental fluorosis.This is an in vitro study on dental enamel samples, a total of 180 samples with the inclusion criteria were treated, randomly divided into two groups of 90, according to the type of dental adhesive, where each group was again divided into three groups of 30 samples, representing different degrees of dental fluorosis according to the Thylstrup-Fejerskov index (Group I: TF1 and TF2; Group II: TF3; Group III: TF4). Normality tests, two-factor ANOVA, and post-hoc tests were used to determine differences between the groups, with a significance level of 95%. As results, a statistically significant difference was shown between the use of dental adhesive with 10-MDP and the three groups of dental fluorosis (p=0.011), in addition, a Tukey post-hoc test on the groups treated with 10-MDP adhesive revealed a statistically significant difference between group I versus group II, and group I versus group III, (p=<0.05). It is concluded that the use of adhesive systems with 10-MDP presents a better shear bond strength on enamel with dental fluorosis grades I and II in the Thylstrup-Fejerskov index.

La fluorosis dental puede ocasionar cambios en la superficie del esmalte, condicionando su funcionalidad y estética, la aplicación de adhesivos dentales es una opción de tratamiento, sin embargo, su uso en dientes fluoroticos puede resultar en limitaciones. El objetivo de este estudio consistió en comparar la fuerza de adhesión a la cizalladura de dos diferentes adhesivos, uno con 10-MDP y otro sin 10-MDP, en diferentes grados de fluorosis dental. Se trata de un estudio in vitro en muestras de esmalte dental, un total de 180 muestras con los criterios de inclusión fueron tratadas, aleatoriamente divididas en dos grupos de 90, de acuerdo al tipo de adhesivo dental, donde cada grupo fue dividido nuevamente en tres grupos de 30 muestras, representando diferentes grados de fluorosis dental según el índice de Thylstrup- Fejerskov (Grupo I: TF1 y TF2; Grupo II: TF3; Grupo III: TF4). Para determinar diferencias entre los grupos se utilizaron pruebas de normalidad, ANOVA de dos factores, y pruebas post-hoc, con un nivel de significancia de 95%. Como resultados, se mostró una diferencia estadísticamente significativa entre el uso de adhesivo dental con 10- MDP y los tres grupos de fluorosis dental (p=0.011), además, una prueba post hoc de Tukey sobre los grupos tratados con adhesivo 10-MDP revelaron una diferencia estadísticamente significativa entre el grupo I frente al grupo II, y el grupo I frente al grupo III, (p=<0.05) Se concluye que el uso de sistemas adhesivos con 10-MDP presentan una mejor resistencia de adhesión al cizallamiento en esmalte con grados de fluorosis dental I y II en el índice de Thylstrup-Fejerskov

Fatores que influenciam o perfil de conhecimento dos cirurgiões-dentistas brasileiros sobre sistemas adesivos / Factores que influyen en el perfil de conocimiento de los odontólogos brasileños sobre los sistemas adhesivos / Factors that influence the knowledge profile of Brazilian dental professionals about dental adhesive systems

Os sistemas adesivos estão diretamente envolvidos nos procedimentos mais corriqueiros da prática clínica odontológica, o que torna o seu conhecimentoindispensável para os profissionais. O objetivo do presente estudo foi avaliar o perfil de conhecimento sobre sistemas adesivos e verificar os fatores que influenciam nesse desfecho, com ênfase na formação profissional. A coleta de dados foi realizada pormeio de um questionário levando em consideração: I. Perfil do profissional; II. Conhecimento, uso e preferências sobre os sistemas adesivos. A amostra foi composta por 501 cirurgiões-dentistas brasileiros e os dados foram analisados no programa Sigma Stat5.0 (p<0,05). O percentual mínimo de acertos das questões considerado adequado foi definido como 80%. Os resultados mostraram que apenas 46,3% dos profissionais demonstraram conhecimento adequado sobre o assunto. Além disso, verificou-se associação estatisticamente significativa entre o baixo nível de acertos e profissionais com preferência por sistemas adesivos simplificados (p=0,046), especialistas em ortodontia [OR=0,24 (0,08-0,67)] e cirurgiões-dentistas graduados em instituições privadas [OR=1,58 (1,03-2,42)]. Esse cenário alerta para a necessidade iminente de sanar essa fragilidade por meio de melhorias nas matrizes curriculares, além da educação continuada de docentes e constante atualização dos profissionais (AU).

Los sistemas adhesivos están directamente involucrados en los procedimientos más comunes de la práctica clínica dental, lo que hace que su conocimiento sea fundamental para los profesionales. El objetivo del presente estudio fue evaluar el perfil de conocimiento sobre sistemas adhesivos y verificar los factores que influyen en ese resultado, con énfasis en la formación profesional. La recolección de datos se realizó a través de un cuestionario teniendo en cuenta: I. Perfil del profesional; II. Conocimiento,uso y preferencias sobre los sistemas adhesivos. La muestra estuvo compuesta por 501 dentistas brasileños y los datos fueron analizados mediante el programa Sigma Stat 5.0 (p<0,05). El porcentaje mínimo de respuestas correctas a las preguntas considerado adecuado se definió en el 80%. Los resultados mostraron que sólo el 46,3% de los profesionales demostraron conocimientos adecuados sobre el tema. Además, hubo una asociación estadísticamente significativa entre el bajo nivel de aciertos y los profesionalescon preferencia por los sistemas adhesivos simplificados (p=0,046), especialistas en ortodoncia [OR=0,24 (0,08-0,67)] y odontólogos egresados de instituciones privadas [OR=1,58 (1,03-2,42)]. Este escenario advierte de la inminente necesidad de subsanar esta debilidad a través de mejoras en las matrices curriculares, además de la formación continua de los docentes y la constante actualización de los profesionales (AU).

Dental adhesive systems are directly involved in common procedures of clinical dentistry, which makes knowledge about this topic indispensable for professionals. The objectives of the current study are to analyze the knowledge profile of dental professionals about dental adhesive systems and verify factors that influence this closure, with emphasis on professional education. The data was collected using a list of questions that consider: I) Professional profile and II) Knowledge, use, and preferences of adhesive systems. The sample considers 501 Brazilian dentists and the data was analyzed using the software Sigma Stat 5.0 (p<0.05). The minimum percentual of correct questions considered adequate was defined as 80%. The results show that only 46.3% of the professionals demonstrated satisfactory knowledge on the subject. In addition, it verified relevant statistical association between low level of correct questions and professionals with preferences for simplified adhesive systems (p=0.046), orthodontic specialists [OR=0.24 (0.08­0.67)], and dentists with private education degrees [OR=1.58 (1.03­2.42)]. This context indicates the imminent necessity to resolve this weakness through improvements in the educational curriculum, as well as continuing education of faculty and constant updating of professionals (AU).

Influence of silver nanoparticles on the resin-dentin bond strength and antibacterial activity of a self-etch adhesive system.

STATEMENT OF PROBLEM: The influence of silver nanoparticles on adhesive properties of Single Bond Universal (3M ESPE) and the antibacterial activity of silver nanoparticles-modified adhesives against Streptococcus mutans is unclear. PURPOSE: The purpose of this in vitro study was to evaluate the effect of silver nanoparticles on the dentin bond strength of modified adhesives and the antibacterial activity against the cariogenic pathogen S. mutans. MATERIAL AND METHODS: Single Bond Universal adhesive was used as the control. Silver nanoparticles were added to adhesives at 0.05% and 0.1% (by weight) (experimental groups), and scanning electron microscopy was used to observe the uniformity of the modified adhesives. The Single Bond Universal adhesive and the modified adhesives were then used to prepare dentin-composite resin blocks. The microtensile bond strength and microleakage of the prepared dentin-composite resin blocks were determined with or without thermocycling. The colony-forming units (CFU) of S. mutans cultured with the adhesives were evaluated, and the microtensile bond strength and microleakage of each group were tested after treatment with S. mutans. The differences in the microtensile bond strength or CFU were analyzed by using the 2-way analysis of variance and independent sample t test. The differences in microleakage between the groups were evaluated by using the Mann-Whitney test (α=.05). RESULTS: Silver nanoparticle-modified adhesives exhibited uniform morphologies without agglomeration and exhibited a homogeneous adhesive layer in dentin-composite resin blocks. The microtensile bond strength and microleakage of the modified adhesives were similar to those of the control group, with or without thermocycling (P>.05). However, thermocycling reduced the bond strength significantly (P<.001). Self-etch adhesives incorporated with silver nanoparticles showed significant antibacterial activities after less than 6 months of aging treatment. The modified adhesives did not exhibit a decreased bond strength after S. mutans exposure (P>.05), while the control group exhibited a markedly decreased bond strength after S. mutans exposure (P<.05). CONCLUSIONS: Silver nanoparticle-modified adhesives showed excellent antibacterial activities against S. mutans and resisted the destruction of dentin bond strength caused by S. mutans while not compromising the bonding properties of Single Bond Universal self-etch adhesives.

Effect of Dentin-Disinfection Chemicals on Shear Bond Strength and Microhardness of Resin-Infiltrated Human Dentin in Different Adhesive Protocols.

Background and Objectives: Bacteria and its remnants beneath the restorations predispose the tooth to secondary caries and pulpal pathology. Hence, various chemical antibacterial agents are suggested to disinfect the prepared tooth structure before the definitive restorative procedure. This study aimed to investigate the effects of chemical disinfectant solutions on the micro-shear bond strength (µSBS) and microhardness of total-etch and self-etch resin-infiltrated human dentin. Materials and Methods: 100 caries-free intact permanent third molar teeth were vertically sectioned into the buccal and lingual half. All these specimens were mounted on acrylic resin and underlying dentin surfaces were exposed by grinding. Samples were randomly divided into five groups [n = 20] following total-etch and self-etch adhesive protocol. Teeth samples were divided according to surface treatment, as Group I (Control-CNT), Group II (2% chlorhexidine-CHX), Group III (5.25% sodium hypochlorite-NaOCl), Group IV (17% ethylenediaminetetraacetate acid­EDTA) and Group V (10% povidone iodine-PVI). A randomly selected 10 samples from each subgroup were used for µSBS and microhardness tests. After surface treatment and bonding procedure, nono-hybrid composite cylinders with a 3-mm diameter and 2-mm height were directly cured over the dentin substrate. The samples for µSBS were subjected to 5000 thermocycles and tested using a universal testing machine. Microhardness was assessed using a micro-indenter instrument, data were statistically analyzed using a one-way analysis of variance and Tukey HSD tests at p < 0.05. Results: Amongst the chemical disinfectant assessed, 2% CHX did not affect µSBS and produced a marginal reduction in dentin microhardness compared to the control group. The 5.25% NaOCl and 17% EDTA significantly compromised the microhardness of the dentin substrate. Meanwhile, 10% PVI surface treatment resulted in a substantial reduction in µSBS between composite and dentin. Conclusions: CHX with preservation of bonding to dentin and insignificant negative effect on dentin microhardness is a safe option for tooth disinfection.

Influence of the Flowable Resin Layer on Bond Strength Between Resin Cement and a Universal Adhesive Applied in the Immediate Dentin-sealing Technique.

OBJECTIVES: The present study evaluated the influence of a flowable resin layer on bond strength between resin cement and a universal adhesive applied using an immediate dentin sealing (IDS) technique. METHODS AND MATERIALS: Coronary portions of bovine teeth were randomly divided into six groups (n=15). In the IDS.U group, the exposed dentin was immediately sealed with the Single Bond Universal adhesive (3M ESPE) following the self-etching protocol. In the IDS.UF group, a layer of Filtek Z350 (3M ESPE) flow resin was applied over the universal adhesive. In the DDS (control) group, the dentin was kept "fresh" and delayed dentin sealing was performed. After 24 hours in distilled water at 37°C, dentin surfaces were treated with pumice, phosphoric acid, and the application of the universal adhesive in the IDS.U and IDS. UF groups. The DDS group was treated with pumice and the universal adhesive was applied. The samples received cylinders of resin cement Rely X Ultimate (3M ESPE) made with the aid of starch tubes of 0.96 mm in diameter and 2 mm in length. They were submitted to the microshear bond strength test (µSBS) at 0.5 mm/min, after 24 hours (T1) and 3 months (T2). The fracture areas were evaluated qualitatively using a DSM 300 microscope (KOZO) with 45× magnification and classified as: adhesive, cohesive in cement, cohesive in dentin, or mixed. Samples were analyzed by scanning electron microscopy (SEM). The data were compared statistically between groups using the Kruskal-Wallis test, and intra-groups using the Mann-Whitney test (α=0.05). RESULTS: There were no significant differences between groups for the bond strength values (p>0.05). The IDS.UF group showed higher values at 3 months, when compared to the values of 24 hours (p<0.001). All groups showed a predominance of adhesive fracture (86.7% to 100%). SEM showed dentinal tubules exposed in the IDS.U and DDS groups; in the IDS.UF group, the tubules were completely sealed. CONCLUSIONS: The flow resin can be used on the adhesive when using the IDS technique because it increased the bond strength values after 3 months and promoted effective sealing of the dentinal tubules.

Effect of high-concentration bleaching agents on dentin bonding: an in vitro study.

The aim of this in vitro study was to evaluate the effect of high-concentration hydrogen peroxide (HP) and carbamide peroxide (CP) bleaching solutions on the dentin-resin interface and the shear bond strength (SBS) of restorative materials. A total of 56 extracted human premolars were prepared with flat dentin windows and divided into groups according to the bleaching protocol: group A, bleached with 35% HP (n = 24); group B, bleached with 35% CP (n = 24); and group C, control, no bleaching (n = 8). Groups A and B were each divided into 3 subgroups according to the time of bonding: A0 or B0, bonded immediately after bleaching (n = 8); A1 or B1, bonded 1 week after bleaching (n = 8); and A2 or B2, bonded 2 weeks after bleaching (n = 8). The specimens in group C were bonded without prior bleaching. Scanning electron microscopic analysis was conducted to evaluate the length of the resin tags at the dentin-resin interface. For SBS testing, the specimens were loaded into a universal testing machine at a crosshead speed of 0.5 mm/min. The mean resin tag lengths of groups that were bonded immediately (A0 and B0) or after a 1-week delay (A1 and B1) were significantly shorter than that of group C (P < 0.001; Kruskal-Wallis test), but the differences between the 2-week delayed bonding groups (A2 and B2) and group C were not statistically significant. The SBS values of both the 35% HP and 35% CP groups increased significantly with delayed bonding time (P < 0.05; 1-way analysis of variance). When bonding was delayed until 2 weeks after bleaching, the mean SBSs of the bleaching and control groups were not significantly different (P > 0.05; Tukey test).

Effect of decontamination procedures on marginal and internal adaptation in saliva-contaminated composite resin restorations.

The aim of the present study was to evaluate the effect of natural saliva contamination of dentin on the adaptation of composite resin restorations as well as the efficacy of various decontamination techniques. A total of 120 human molars and premolars were randomly distributed into 6 groups (n = 20). Standardized dentin cavities were prepared and restored with composite resin after 1 of 6 different surface treatments, which included a 2-step etch-and-rinse adhesive: 1, dentin etching, adhesive application following the manufacturer's instructions (control), light curing; 2, dentin etching, saliva contamination, air drying, adhesive application, light curing; 3, dentin etching, saliva contamination, water rinsing, air drying, adhesive application, light curing; 4, dentin etching, adhesive application, light curing, saliva contamination, air drying; 5, dentin etching, adhesive application, light curing, saliva contamination, water rinsing, air drying; or 6, dentin etching, adhesive application, light curing, saliva contamination, water rinsing, air drying, adhesive reapplication. The adaptation was evaluated at the top surface and at depths of 0.5 and 1.0 mm by measuring the length of the debonded margin and calculating its percentage relative to the cavity perimeter (%DM). The internal adaptation was evaluated by measuring the width of the maximum marginal gap (MMG). Inferior adaptation was observed after saliva contamination took place. Group 1 presented the most satisfactory adaptation at the top surface, whereas groups 4 and 5 had the highest %DM and greatest MMG at all surfaces (P < 0.05). The %DM and MMG values in groups 2, 3, and 6 were not significantly different from those of group 1 or each other. Saliva contamination after adhesive application (groups 4 and 5) resulted in deterioration of marginal and internal adaptation. Reapplication of the adhesive restored adaptation, as evidenced by the %DM and MMG values in group 6.

Effect of Dentin Moisture in Posterior Restorations Performed with Universal Adhesive: A Randomized Clinical Trial.

OBJECTIVES: This double-blind, randomized clinical trial evaluated the influence of dentin moisture on postoperative sensitivity (POS), as well as, on clinical performance in posterior bulk-fill composite restorations, using a universal adhesive, until 12 months after clinical service. METHODS AND MATERIALS: In accordance with a split-mouth design, 45 patients received posterior restorations, restored with a bulk-fill resin composite (Filtek Bulk Fill, 3M Oral Care) and a universal adhesive used in etch-and-rinse mode (SBU; Single Bond Universal Adhesive), which were applied on dry or moist dentin, with a cavity depth of at least 3 mm. Three operators placed 90 Class I/Class II restorations. Patients were evaluated for spontaneous and stimulated POS in the baseline, and after 48 hours, 7 days, and at 6 and 12 months. In addition, secondary parameters (marginal discoloration, marginal adaptation, fracture, and recurrent caries) were evaluated by World Dental Federation (FDI) criteria after 7 days and at 6 and 12 months. Statistical analyzes were performed using the Chi-square, Fisher exact, Friedman, Kruskall-Wallis, and Mann-Whitney tests (α=0.05). RESULTS: No significant spontaneous and stimulated POS was observed when SBU was applied in dry and moist dentin (p>0.05). A significant and higher risk of spontaneous POS (20.0%; 95%CI 10.9-33.82 for dry dentin and 22.22%; 95%CI 12.54-36.27 for moist dentin) occurred up to 48 hours after restoration placement for the dry and moist dentin groups (p<0.02). However, the POS intensity was mild up to 48 hours with no significant difference between dry and moist dentin groups (p>0.79). When secondary parameters were evaluated, no significant differences between the groups were observed. CONCLUSION: Dentin moisture did not influence POS in posterior bulk-fill composite restorations when associated with a universal adhesive applied in etch-and-rinse mode.

Five-year Randomized Clinical Trial on the Performance of Two Etch-and-rinse Adhesives in Noncarious Cervical Lesions.

OBJECTIVES: To evaluate the 5-year clinical performance of two-step etch-and-rinse adhesives in noncarious cervical lesions (NCCL). METHODS AND MATERIALS: The sample comprised 35 adults with at least two similar-sized NCCL. Seventy restorations were placed, according to one of the following groups: Adper Single Bond 2 (SB) and Ambar (AM). The restorations were placed incrementally using a resin composite (Opallis). The restorations were evaluated at baseline and after 6 and 18 months and 5 years using some items of the FDI criteria. The differences in the ratings of the two materials after 6 months, 18 months, and 5 years were performed with Friedman repeated measures ANOVA by rank and McNemar test for significance in each pair (α=0.05). RESULTS: Five patients did not attend the 60-month recall. No significant differences were observed between the materials for any criteria evaluated. Twenty-one restorations failed (12 for SB and 9 for AM) after 60 months. Thus, the retention rate for SB at 60 months were 55.6% for SB and 71% for AM (p=0.32). After 60 months, 12 restorations (6 for SB and 6 AM) showed some loss of marginal adaptation (p=1.0). Slight marginal discoloration was observed in 10 restorations (6 for SB and 4 AM; p=0.91). Five restorations (2 for SB and 3 for AM) showed recurrences of caries (p=1.0). CONCLUSIONS: Both two-step etch-and-rinse adhesives-Adper Single Bond 2, a polyalkenoic acid-containing adhesive, and Ambar, a 10-methacryloyloxydecyl dihydrogen phosphate (MDP)-containing adhesive-showed acceptable clinical performance after 60 months.

Evaluation of Novel Plant-derived Monomers-based Pretreatment on Bonding to Sound and Caries-affected Dentin.

This study evaluated the influence of new monomers derived from cashew nut shell liquid (CNSL) applied for dentin biomodification on resin-dentin bond strength, nanoleakage, and micropermeability to sound and artificially-created caries-affected dentin. Human dentin specimens were assigned to five groups, according to the following dentin pretreatment solutions: Absolute ethanol (control), 2 wt% grape seed extract (Vitis vinifera), 2 wt% cardol [from cashew nut shell liquid (CNSL)], 2 wt% cardol-methacrylate or 2 wt% cardanol-methacrylate applied on sound and artificial caries-affected dentin. Specimens were analyzed after 24 hour or 1 year of water storage. Microtensile bond strength (µTBS) (n=6), interface micropermeability (n=3), and silver nanoleakage (n=6) were assessed using a universal testing machine, confocal laser scanning microscope, and scanning electron microscope, respectively. In sound dentin, no difference in bond strength was observed between the groups in either storage period. In artificial caries-affected dentin, pretreatment with cardol-methacrylate resulted in statistically higher bond strength than all the other treatments in both storage periods. Cardol-methacrylate treatment resulted in less nanoleakage, along with improved interfacial integrity, compared to further treatments in artificial caries-affected dentin. Regarding micropermeability analysis, all treatments depicted deficient sealing ability when applied on artificial caries-affected dentin, with the presence of gaps in the control group. In conclusion, cardol-methacrylate is a promising plant-derived monomer to reinforce the hybrid layer, since it preserved resin-dentin bond strength and improved dentin bonding, especially to caries-affected dentin, a well-known harsh substrate for adhesion longevity.

Avaliação clínica de restaurações Classe V em cavidades tratadas com o laser de Er: YAG associado ao uso de sistemas adesivos autocondicionantes / Clinical evaluation of Class V restorations in cavities treated with Er: YAG laser associated with the use of self-etching adhesive systems

O objetivo deste estudo clínico, controlado, randomizado, cego e prospectivo foi de avaliar a efetividade clínica de restaurações em lesões não cariosas (cavidades Classe V) realizadas em superfícies dentais pré-tratadas ou não com laser de Er:YAG e utilizando dois sistemas adesivos autocondicionantes. Este estudo foi realizado com um total de 91 lesões e divididas em 4 grupos (n = 23) :G1(FL): Sem pré-tratamento e utilizando o adesiso FL-Bond II/Shofu; G2 (CF): sem pré-tratamento e utilizando o adesivo Clearfil SE Bond 2/Kuraray Noritake; G3 (Laser + FL): pré-tratamento associado ao uso do FL-Bond II/Shofu e G4 (Laser + CF): pré-tratamento associado ao uso do Clearfil SE Bond 2/Kuraray Noritake Os dentes avaliados foram os pré-molares de ambas as arcadas. A avaliação foi feita imediatamente após o tratamento e ao longo do tempo, em 3, 6 e 12 meses após a finalização da restauração. Para a avaliação da sensibilidade foi considerado a EVA (Escala Visual Analógica) e para a qualidade da restauração o método do USPHS modificado, considerando a avaliação de perda de retenção, integridade marginal, pigmentação marginal, presença de lesão de cárie em margem de restauração, vitalidade pulpar e sensibilidade pós-operatória. Os dados foram registrados em tabelas de frequência, e os escores transformados em postos para a aplicação do teste ANOVA. A significância estatística foi considerada para valores de p<0,05. Para os resultados da avaliação de sensibilidade houve uma diferença estatística significante da sensibilidade ao longo do tempo (p<0,001), sendo que essa diferença se deu a partir da avaliação T1 (48 horas) em todos os grupos. Em relação aos critérios avaliados no USPHS, foram encontrados variações estatísticas em alguns tópicos: Pigmentação marginal - G1 (FL) (p=0,041) e G2 ( Laser + FL) (p=0,009) e Integridade marginal G1(FL)( p=0,036). Os demais grupos e critérios não apresentaram variações estatísticas significantes.Pré-tratamentos com laser Er:YAG podem ser uma alternativa viável em restaurações adesivas do tipo classe V; no entanto, nenhum efeito sinérgico de ambos os tratamentos combinados foi observado.

The objective of this clinical, controlled, randomized, blinded and prospective study was to evaluate the clinical effectiveness of restorations in non-carious lesions (Class V cavities) performed on dental surfaces pre-treated or not with Er:YAG laser and using two adhesive systems self-conditioning. This study was carried out with a total of 91 lesions and divided into 4 groups (n = 23) :G1(FL): No pre-treatment and using the FL-Bond II/Shofu adhesive; G2 (CF): without pre-treatment and using Clearfil SE Bond 2/Kuraray Noritake adhesive; G3 (Laser + FL): pre-treatment associated with the use of FL-Bond II/Shofu and G4 (Laser + CF): pre-treatment associated with the use of Clearfil SE Bond 2/Kuraray Noritake The teeth evaluated were the premolars of both arcades. Assessment was performed immediately after treatment and over time, at 3, 6, and 12 months after completion of the restoration. The VAS (Visual Analogue Scale) was used for the sensitivity assessment and the modified USPHS method for the quality of the restoration, considering the assessment of loss of retention, marginal integrity, marginal pigmentation, presence of caries in the restoration margin. , pulp vitality and postoperative sensitivity. Data were recorded in frequency tables, and the scores were transformed into ranks for the application of the ANOVA test. Statistical significance was considered for values of p<0.05. For the results of the sensitivity evaluation, there was a statistically significant difference in sensitivity over time (p<0.001), and this difference occurred from the T1 evaluation (48 hours) in all groups. Regarding the criteria evaluated at the USPHS, statistical variations were found in some topics: Marginal pigmentation - G1 (FL) (p=0.041) and G2 (Laser + FL) (p=0.009) and Marginal integrity - G1(FL)( p =0.036). The other groups and criteria did not present significant statistical variations. Pretreatments with Er:YAG laser can be a viable alternative in class V adhesive restorations; however, no synergistic effect of both treatments combined was observed.

Adhesión a dentina part II: estrategias para optimizar la adhesión a dentina y protocolos adhesivos / Dentin bonding part II: strategies to optimize dentin bonding and adhesive protocols

La adhesión a dentina con sistemas adhesivos polimé-ricos representa un desafío que surge de la necesi-dad de vincular un sustrato dentario heterogéneo y variable con materiales que presentan todavía cier-tos aspectos a atender para poder conseguir el máxi-mo desempeño. El propósito del presente artículo es evaluar algunas de las estrategias propuestas para mejorar la adhesión a dentina, y sugerir un protocolo de trabajo con los diferentes tipos de sistemas adhesivos (AU)

Dentin bonding with polymeric adhesive systems represents a challenge that arises from the need to link a heterogeneous and variable dental substrate with materials that still have certain aspects to be addressed in order to achieve maximum performance. The aim of this article is to evaluate some of the proposed strategies to improve dentin bonding and to suggest a protocol for each different type of bonding systems (AU)

Mechanical Stability and Proteolytic Activity of Resin-dentin Bonds Using the Cross-linked Dry Bonding Technique.

OBJECTIVE: To evaluate the mechanical stability and the proteolytic activity of bonds created by a two-step, etch-and-rinse adhesive applied to cross-linked and air-dried etched dentin. METHODS: Flat dentin surfaces were produced in 64 extracted sound human molars. The dentin was etched with 35% phosphoric acid for 15 seconds, and then the teeth were divided into groups according to the cross-linking solution applied on the etched dentin. Group 1: 5% grape seed extract (GSE), Group 2: 5% glutaraldehyde, Group 3: Gluma Desensitizer, or Group 4: deionized water (control). Solutions were applied for 60 seconds, followed by rinse and blot drying. Then, the teeth were separated into two subgroups where the etched dentin was kept moist or air-dried. The adhesive was applied followed by a composite resin buildup. After 24 hours, the teeth were cut into beams (0.81 mm²) that were tested for microtensile strength immediately or after 12 months of aging in a 37°C saliva-like buffer. Additional teeth (n=32) were bonded as described and cut into 0.5-mm-thick slabs. The slabs were prepared for nanoleakage (scanning electron microscopy) and in situ zymography (EnzChek Protease Assay Kit). Bond strength data were submitted to ANOVA and Tukey tests (α =0.05). RESULTS: Significant reduction in immediate bond strength (ca 65%) and increase in proteolytic activity was seen when the etched dentin was air dried without previous cross-linking biomodification. Conversely, bond strengths did not differ from those produced on wet dentin when collagen was cross-linked before air drying, irrespective of the solution applied. For both moist and air-dried etched dentin, collagen cross-linking resulted in mechanically stable bonds and reduced proteolytic activity after 12 months of storage. CONCLUSION: Bonds produced by the application of a two-step, etch-and-rinse adhesive to cross-linked, air-dried, etched dentin were mechanically stable and revealed reduced proteolytic activity after 1 year of aging.

Challenging the Concept that OptiBond FL and Clearfil SE Bond in NCCLs Are Gold Standard Adhesives: A Systematic Review and Meta-analysis.

PURPOSE: The following PICO (Patient/Population, Intervention, Comparison, and Outcomes) question was proposed: "Are retention rates of composite resin restorations in noncarious cervical lesions (NCCLs) when using adhesives considered "gold standard" (OptiBond FL and Clearfil SE Bond) higher than those obtained with other adhesives brands"? METHODS: A search was performed in February 2019 (updated in November 2019) in the PubMed/MEDLINE, EMBASE, LILACS, BBO, Web of Science, Cochrane Library, Grey Literature, and IADR abstracts (1990-2018); unpublished and ongoing trial registries, dissertations, and theses were also searched. Only randomized clinical trials (RCTs) conducted in NCCLs that compared either OptiBond FL or Clearfil SE Bond adhesive with other commercially available adhesives were included. The risk of bias (RoB) was applied by using the Cochrane Collaboration tool. A meta-analysis was performed for retention rates at different follow-up times using a random effects model for both the adhesives. Heterogeneity was assessed with the Cochran Q test and I2 statistics. Grading of Recommendations: Assessment, Development and Evaluation (GRADE) assessed the quality of evidence. RESULTS: After removal of duplicates and noneligible articles, 25 studies remained for qualitative synthesis, as one study was common to the two adhesives, of which 9 studies were used for the OptiBond FL meta-analysis and 14 for the Clearfil SE Bond meta-analysis. No significant differences were observed for retention rates in follow-up periods of 12-24 months (p=0.97), 36-48 months (p=0.72), or 108-156 months (p=0.73) for OptiBond FL; and for 12-24 months (p=0.10) and 36-48 months (p=0.17) for Clearfil SE Bond. A significant difference was only found for OptiBond FL at 60-96 months (p=0.02), but only three studies were included in this meta-analysis. CONCLUSIONS: The evidence from available RCTs conducted in NCCLs that compared OptiBond FL or Clearfil SE Bond does not support the widespread concept that these adhesives are better than any other competitive brands available in the dental market.

Rehabilitación estética mínimamente invasiva en diente anterior afectado por hipoplasia de esmalte: Reporte de caso clínico / Minimally Invasive Restoration in Anterior Teeth Affected by Enamel Hypoplasia: Clinical Case Report

RESUMEN La preservación de tejido dental sano contribuye a la práctica de una Odontología conservadora, permitiendo la aplicación de los principios biológicos y mecánicos de una forma más predecible. Las preparaciones cavitarias mínimamente invasivas son el complemento de la correcta selección de materiales adhesivos y de resina compuesta. La correcta aplicación de un protocolo adhesivo nos proporcionará resultados estéticos imperceptibles y un longevo desempeño clínico.

ABSTRACT The preservation of healthy dental structures contributes to the practice of a conservative dentistry. This concept involves the implementation of biological and mechanical principles in a more predictable manner. Minimally invasive cavity preparations are the complement to the selection of adhesive and composite resin materials. The correct application of an adhesive protocol will provide imperceptible aesthetic restorations and adequate clinical performance.