Multi-oligomeric states of alamethicin ion channel: Assemblies and conductance.

Transmembrane assemblies of the peptaibol alamethicin (ALM) are among the most extensively studied ion channels not only because of their antimicrobial activity but also as models for channel structure and aggregation. In this study, several oligomeric states of ALM are investigated with molecular dynamics simulations to establish properties of the channel and obtain free energy profiles for ion transport and the corresponding values of conductance. The hexamer, heptamer, and octamer of ALM in phospholipid membrane are found to be stable but highly dynamic in barrel-stave structures, with calculated conductance equal to 18, 195, and 1270 pS, respectively, in 1 M KCl ion solution. The corresponding free energy profiles, reported for the first time, are reconstructed from simulations at applied voltage of 200 mV with the aid of the electrodiffusion model both with and without the knowledge of diffusivity. The calculated free energy barriers are equal to 2.5, 1.5, and 0.5 kcal/mol for K+ and 4.0, 2.2, and 1.5 kcal/mol for Cl-, for hexamer, heptamer, and octamer, respectively. The calculated conductance and the ratio between conductance in consecutive states are in good agreement with those measured experimentally. This suggests that the hexamer is the lowest conducting state, with measured conductance equal to 19 pS. The selectivity of K+ over Cl- is calculated as 1.5 and 2.3 for the octameric and heptameric channels, close to the selectivity measured for high-conductance states. Selectivity increases to 13 in the hexameric channel in which the narrowest Gln7 site has a pore radius of only ∼1.6 Å, again in accord with experiment. A good agreement found between calculated and measured conductance through a hexamer templated on cyclodextrin lands additional support for the results of our simulations, and the comparison with ALM reveals the dependence of conductance on the nature of phospholipid membrane.

Total synthesis of the natural, medium-length, peptaibol pentadecaibin and study of the chemical features responsible for its membrane activity.

Peptaibols are naturally occurring, antimicrobial peptides endowed with well-defined helical conformations and resistance to proteolysis. Both features stem from the presence in their sequence of several, Cα -tetrasubstituted, α-aminoisobutyric acid (Aib) residues. Peptaibols interact with biological membranes, usually causing their leakage. All of the peptaibol-membrane interaction mechanisms proposed so far begin with peptide aggregation or accumulation. The long-length alamethicin, the most studied peptaibol, acts by forming pores in the membranes. Conversely, the carpet mechanism has been claimed for short-length peptaibols, such as trichogin. The mechanism of medium-length peptaibols is far less studied, and this is partly due to the difficulties of their synthesis. They are believed to perturb membrane permeability in different ways, depending on the membrane properties. The present work focuses on pentadecaibin, a recently discovered, medium-length peptaibol. In contrast to the majority of its family members, its sequence does not comprise hydroxyprolines or prolines, and its helix is not kinked. A reliable and effective synthesis procedure is described that allowed us to produce also two shorter analogs. By a combination of techniques, we were able to establish a 3D-structure-activity relationship. In particular, the membrane activity of pentadecaibin heavily depends on the presence of three consecutive Aib residues that are responsible for the clear, albeit modest, amphiphilic character of its helix. The shortest analog, devoid of two of these three Aib residues, preserves a well-defined helical conformation, but not its amphipathicity, and loses almost completely the ability to cause membrane leakage. We conclude that pentadecaibin amphiphilicity is probably needed for the peptide ability to perturb model membranes.

Effect of Lipid Composition on the Inhibition Mechanism of Amiloride on Alamethicin Ion Channels in Supported Phospholipid Bilayers.

The inhibition effect of amiloride on alamethicin ion channels was studied in a model zwitterionic floating bilayer lipid membrane (fBLM). The EIS studies indicated that amiloride prevents the transport of ions through the alamethicin channels leading to an overall increase in membrane resistance. The PM-IRRAS data demonstrated that amiloride has no influence on the secondary structure of alamethicin but restricts the insertion of the peptides into the bilayer and blocks ion transport through preformed alamethicin channels. The effect of amiloride on ion channel formation in the floating bilayer formed by a zwitterionic lipid was compared to those of previous studies involving negatively charged fBLMs and tethered zwitterionic lipid bilayers. The findings from these studies show that the effects of amiloride on ion channel formation strongly depend on the mobility and charge of the membrane lipids.

Structure Changes of a Membrane Polypeptide under an Applied Voltage Observed with Surface-Enhanced 2D IR Spectroscopy.

The structures of many membrane-bound proteins and polypeptides depend on the membrane potential. However, spectroscopically studying their structures under an applied field is challenging, because a potential is difficult to generate across more than a few bilayers. We study the voltage-dependent structures of the membrane-bound polypeptide, alamethicin, using a spectroelectrochemical cell coated with a rough, gold film to create surface plasmons. The plasmons sufficiently enhance the 2D IR signal to measure a single bilayer. The film is also thick enough to conduct current and thereby apply a potential. The 2D IR spectra resolve features from both 310- and α-helical structures and cross-peaks connecting the two. We observe changes in the peak intensity, not their frequencies, upon applying a voltage. A similar change occurs with pH, which is known to alter the angle of alamethicin relative to the surface normal. The spectra are modeled using a vibrational exciton Hamiltonian, and the voltage-dependent spectra are consistent with a change in angle of the 310- and α-helices in the membrane from 55 to 44°and from 31 to 60°, respectively. The 310- and α-helices are coupled by approximately 10 cm-1. These experiments provide new structural information about alamethicin under a potential difference and demonstrate a technique that might be applied to voltage-gated membrane proteins and compared to molecular dynamics structures.

NMR studies on the conformation, stability and dynamics of alamethicin in methanol.

Alamethicin is an antibiotic peptide comprising 20 amino acid residues and functions as an ion channel in biological membranes. Natural alamethicins have a variety of amino acid sequences. Two of them, used as a mixed sample in this study, are: UPUAUAQUVUGLUPVUUQQO and UPUAUUQUVUGLUPVUUQQO, where U and O represent α-aminoisobutyric acid and phenylalaninol, respectively. As indicated, only the amino acid at position six differs, and the two alamethicins are referred to as alamethicin-A6 and -U6, respectively. The conformation and thermal stability of alamethicin-A6 and -U6 in methanol were examined using proton nuclear magnetic resonance (NMR) spectroscopy. Both alamethicins form an α-helix between the 2nd and 11th residues. The N-terminal, 19th and C-terminal residues take a non-helical conformation. The structure between the 12th and 18th residues has not been well determined due to the absence of cross peaks in the two-dimensional NMR data. The α-helices are maintained up to 54 °C at least. In contrast to these similarities, it has been found that the length of the α-helix of alamethicin-U6 is somewhat shorter than that of alamethicin-A6, the intra-molecular hydrogen bonds formed by the amide proton of the seventh residue is much more thermally stable for alamethicin-U6 than for alamethicin-A6, and the C-terminal residue of alamethicin-U6 has higher mobility than that of alamethicin-A6. The mobility of the N- and C-terminal residues is discussed on the basis of a model chain which consists of particles connected by rigid links, and the physiological significance of the mobility is emphasized.

Electrophysiological interrogation of asymmetric droplet interface bilayers reveals surface-bound alamethicin induces lipid flip-flop.

The droplet interface bilayer (DIB) method offers simple control over initial leaflet compositions in model membranes, enabling an experimental path to filling gaps in our knowledge about the interplay between compositional lipid asymmetry, membrane properties, and the behaviors of membrane-active species. Yet, the stability of lipid leaflet asymmetry in DIBs has received very little attention, particularly in the presence of peptides and ion channels that are often studied in DIBs. Herein, we demonstrate for the first time parallel, capacitance-based measurements of intramembrane potential with arrays of asymmetric DIBs assembled in a microfluidic device to characterize the stability of leaflet asymmetry over many hours in the presence and absence of membrane-active peptides. DIBs assembled from opposing monolayers of the ester (DPhPC) and ether (DOPhPC) forms of diphytanoyl-phosphatidylcholine yielded asymmetric bilayers with leaflet compositions that were stable for at least 18 h as indicated by a stable |137 mV| intramembrane potential. In contrast, the addition of surface-bound alamethicin peptides caused a gradual, concentration-dependent decrease in the magnitude of the dipole potential difference. Intermittent current-voltage measurements revealed that alamethicin in asymmetric DIBs also shifts the threshold voltage required to drive peptide insertion and ion channel formation. These outcomes take place over the course of 1 to 5 h after membrane formation, and suggest that alamethicin peptides promote lipid flip-flop, even in the un-inserted, surface-bound state, by disordering lipids in the monolayer to which they bind. Moreover, this methodology establishes the use of parallel electrophysiology for efficiently studying membrane asymmetry in arrays of DIBs.

Pore Forming Properties of Alamethicin in Negatively Charged Floating Bilayer Lipid Membranes Supported on Gold Electrodes.

Electrochemical impedance spectroscopy (EIS), atomic force microscopy (AFM), and photon polarization modulation infrared reflection absorption spectroscopy (PM-IRRAS) were employed to investigate the formation of alamethicin pores in negatively charged bilayers composed of a mixture of 1,2-dimyristoyl- sn-glycero-3-phosphocholine (DMPC) and egg-PG floating at gold (111) electrode surfaces modified by self-assembled monolayers of 1-thio-ß-d-glucose (ß-Tg). The EIS data showed that the presence of alamethicin decreases the membrane resistivity by about 1 order of magnitude. PM-IRRAS measurements provided information about the tilt angles of peptide helical axis with respect to the bilayer normal. The small tilt angles obtained for the peptide helical axis prove that the alamethicin molecules were inserted into the DMPC/egg-PG membranes. The tilt angles decreased when negative potentials were applied, which correlates with the observed decrease in membrane resistivity, indicating that ion pore formation is assisted by the transmembrane potential. Molecular resolution AFM images provided visual evidence that alamethicin molecules aggregate forming hexagonal porous 2D lattices with periodicities of 2.0 ± 0.2 nm. The pore formation by alamethicin in the negatively charged membrane was compared with the interaction of this peptide with a bilayer formed by zwitterionic lipids. The comparison of these results showed that alamethicin preferentially forms ion translocating pores in negatively charged phospholipid membranes.

Niosomes, an alternative for liposomal delivery.

Niosomes are used in studies for drug delivery or gene transfer. However, their physical properties and features relative to liposomes are not well documented. To characterize and more rationally optimize niosome formulations, the properties of these vesicle systems are compared to those of liposomes composed of phosphatidylcholine and phosphatidylethanolamine lipids plus cholesterol. Niosomes are highly stable and only slightly more leaky than liposomes as assayed by calcein leakage; the permeability for ions (KCl) is higher than that of liposomes. Contrary to liposomes, the size of niosomes decreases substantially upon freezing in liquid nitrogen and subsequent thawing, as shown by cryo-EM and dynamic light scattering. The packing of niosomal membranes was determined by laurdan fluorescence and is slightly lower than that of liposomes. We did not succeed in the functional reconstitution of the L-arginine/L-ornithine antiporter ArcD2 in niosomes, which we attribute to the non-ionic nature of the surfactants. The antimicrobial peptides alamethicin and melittin act similarly on niosomes and liposomes composed of unsaturated components, whereas both niosomes and liposomes are unaffected when saturated amphiphiles are used. In conclusion, in terms of stability and permeability for drug-size molecules niosomes are comparable to liposomes and they may offer an excellent, inexpensive alternative for delivery purposes.

Alamethicin self-assembling in lipid membranes: concentration dependence from pulsed EPR of spin labels.

The antimicrobial action of the peptide antibiotic alamethicin (Alm) is commonly related to peptide self-assembling resulting in the formation of voltage-dependent channels in bacterial membranes, which induces ion permeation. To obtain a deeper insight into the mechanism of channel formation, it is useful to know the dependence of self-assembling on peptide concentration. With this aim, we studied Alm F50/5 spin-labeled analogs in a model 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine (POPC) membrane, for peptide-to-lipid (P/L) ratios varying between 1/1500 and 1/100. Pulsed electron-electron double resonance (PELDOR) spectroscopy reveals that even at the lowest concentration investigated, the Alm molecules assemble into dimers. Moreover, under these conditions, electron spin echo envelope modulation (ESEEM) spectroscopy of D2O-hydrated membranes shows an abrupt change from the in-plane to the trans-membrane orientation of the peptide. Therefore, we hypothesize that dimer formation and peptide reorientation are concurrent processes and represent the initial step of peptide self-assembling. By increasing peptide concentration, higher oligomers are formed. A simple kinetic model of equilibrium among monomers, dimers, and pentamers allows for satisfactorily describing the experimental PELDOR data. The inter-label distances in the oligomers obtained from PELDOR experiments become better resolved with increasing P/L ratio, thus suggesting that the supramolecular organization of the higher-order oligomers becomes more defined.

Free-Energy Analysis of Peptide Binding in Lipid Membrane Using All-Atom Molecular Dynamics Simulation Combined with Theory of Solutions.

All-atom molecular dynamics (MD) simulations are performed to examine the stabilities of a variety of binding configurations of alamethicin, a 20-amino-acid amphipathic peptide, in the bilayers of 1-palmitoyl-2-oleoyl phosphatidylcholine (POPC) and 1,2-dimyristoyl- sn-glycero-3-phosphatidylcholine (DMPC). The binding free energy of alamethicin is calculated through a combination of MD simulation and the energy-representation theory of solutions, and it is seen that the transmembrane configuration is stable in both membranes. A surface-bound state is also found to be stable due to the balance between the attractive and repulsive interactions of the peptide with lipid and water, and the key role of water is pointed out for the stability in the interfacial region. A difference between the POPC and DMPC systems is noted when the polar C-terminal domain is buried in the hydrophobic region of the membrane. In POPC, the peptide is unfavorably located with that configuration due to the loss of electrostatic interaction between the peptide and lipid.

Monitoring the Orientational Changes of Alamethicin during Incorporation into Bilayer Lipid Membranes.

Antimicrobial peptides (AMPs) are the first line of defense after contact of an infectious invader, for example, bacterium or virus, with a host and an integral part of the innate immune system of humans. Their broad spectrum of biological functions ranges from cell membrane disruption over facilitation of chemotaxis to interaction with membrane-bound or intracellular receptors, thus providing novel strategies to overcome bacterial resistances. Especially, the clarification of the mechanisms and dynamics of AMP incorporation into bacterial membranes is of high interest, and different mechanistic models are still under discussion. In this work, we studied the incorporation of the peptaibol alamethicin (ALM) into tethered bilayer lipid membranes on electrodes in combination with surface-enhanced infrared absorption (SEIRA) spectroscopy. This approach allows monitoring the spontaneous and potential-induced ion channel formation of ALM in situ. The complex incorporation kinetics revealed a multistep mechanism that points to peptide-peptide interactions prior to penetrating the membrane and adopting the transmembrane configuration. On the basis of the anisotropy of the backbone amide I and II infrared absorptions determined by density functional theory calculations, we employed a mathematical model to evaluate ALM reorientations monitored by SEIRA spectroscopy. Accordingly, ALM was found to adopt inclination angles of ca. 69°-78° and 21° in its interfacially adsorbed and transmembrane incorporated states, respectively. These orientations can be stabilized efficiently by the dipolar interaction with lipid head groups or by the application of a potential gradient. The presented potential-controlled mechanistic study suggests an N-terminal integration of ALM into membranes as monomers or parallel oligomers to form ion channels composed of parallel-oriented helices, whereas antiparallel oligomers are barred from intrusion.

Communication: Alamethicin can capture lipid-like molecules in the membrane.

Alamethicin (Alm) is a 19-mer antimicrobial peptide produced by fungus Trichoderma viride. Above a threshold concentration, Alm forms pores across the membrane, providing a mechanism of its antimicrobial action. Here we show that at a small concentration which is below the threshold value, Alm participates in formation of nanoscale lipid-mediated clusters of guest lipid-like molecules in the membrane. These results are obtained by electron spin echo (ESE) technique-a pulsed version of electron paramagnetic resonance-on spin-labeled stearic acid in a 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine bilayer with Alm added at 1/200 peptide-to-lipid ratio. ESE decay measurements are interpreted assuming that stearic acid molecules in the membrane are assembling around the Alm molecule. One may suggest that this Alm capturing effect on the guest lipid-like molecules could be important for the peptide antimicrobial action.

Alamethicin Supramolecular Organization in Lipid Membranes from 19F Solid-State NMR.

Alamethicins (ALMs) are antimicrobial peptides of fungal origin. Their sequences are rich in hydrophobic amino acids and strongly interact with lipid membranes, where they cause a well-defined increase in conductivity. Therefore, the peptides are thought to form transmembrane helical bundles in which the more hydrophilic residues line a water-filled pore. Whereas the peptide has been well characterized in terms of secondary structure, membrane topology, and interactions, much fewer data are available regarding the quaternary arrangement of the helices within lipid bilayers. A new, to our knowledge, fluorine-labeled ALM derivative was prepared and characterized when reconstituted into phospholipid bilayers. As a part of these studies, C19F3-labeled compounds were characterized and calibrated for the first time, to our knowledge, for 19F solid-state NMR distance and oligomerization measurements by centerband-only detection of exchange (CODEX) experiments, which opens up a large range of potential labeling schemes. The 19F-19F CODEX solid-state NMR experiments performed with ALM in POPC lipid bilayers and at peptide/lipid ratios of 1:13 are in excellent agreement with molecular-dynamics calculations of dynamic pentameric assemblies. When the peptide/lipid ratio was lowered to 1:30, ALM was found in the dimeric form, indicating that the supramolecular organization is tuned by equilibria that can be shifted by changes in environmental conditions.

Electronic control of H+ current in a bioprotonic device with Gramicidin A and Alamethicin.

In biological systems, intercellular communication is mediated by membrane proteins and ion channels that regulate traffic of ions and small molecules across cell membranes. A bioelectronic device with ion channels that control ionic flow across a supported lipid bilayer (SLB) should therefore be ideal for interfacing with biological systems. Here, we demonstrate a biotic-abiotic bioprotonic device with Pd contacts that regulates proton (H+) flow across an SLB incorporating the ion channels Gramicidin A (gA) and Alamethicin (ALM). We model the device characteristics using the Goldman-Hodgkin-Katz (GHK) solution to the Nernst-Planck equation for transport across the membrane. We derive the permeability for an SLB integrating gA and ALM and demonstrate pH control as a function of applied voltage and membrane permeability. This work opens the door to integrating more complex H+ channels at the Pd contact interface to produce responsive biotic-abiotic devices with increased functionality.

Simulations of Membrane-Disrupting Peptides I: Alamethicin Pore Stability and Spontaneous Insertion.

An all-atom molecular dynamics simulation of the archetype barrel-stave alamethicin (alm) pore in a 1,2-dioleoyl-sn-glycero-3-phosphocholine bilayer at 313 K indicates that ∼7 µs is required for equilibration of a preformed 6-peptide pore; the pore remains stable for the duration of the remaining 7 µs of the trajectory, and the structure factors agree well with experiment. A 5 µs simulation of 10 surface-bound alm peptides shows significant peptide unfolding and some unbinding, but no insertion. Simulations at 363 and 413 K with a -0.2 V electric field yield peptide insertion in 1 µs. Insertion is initiated by the folding of residues 3-11 into an α-helix, and mediated by membrane water or by previously inserted peptides. The stability of five alm pore peptides at 413 K with a -0.2 V electric field demonstrates a significant preference for a transmembrane orientation. Hence, and in contrast to the cationic antimicrobial peptide described in the following article, alm shows a strong preference for the inserted over the surface-bound state.

Single-cell, time-resolved study of the effects of the antimicrobial peptide alamethicin on Bacillus subtilis.

Alamethicin is a well-studied antimicrobial peptide (AMP) that kills Gram-positive bacteria. It forms narrow, barrel-stave pores in planar lipid bilayers. We present a detailed, time-resolved microscopy study of the sequence of events during the attack of alamethicin on individual, live Bacillus subtilis cells expressing GFP in the cytoplasm. At the minimum inhibitory concentration (MIC), the first observed symptom is the halting of growth, as judged by the plateau in measured cell length vs time. The data strongly suggest that this growth-halting event occurs prior to membrane permeabilization. Gradual degradation of the proton-motive force, inferred from a decrease in pH-dependent GFP fluorescence intensity, evidently begins minutes later and continues over about 5 min. There follows an abrupt permeabilization of the cytoplasmic membrane to the DNA stain Sytox Orange and concomitant loss of small osmolytes, causing observable cell shrinkage, presumably due to decreased turgor pressure. This permeabilization of the cytoplasmic membrane occurs uniformly across the entire membrane, not locally, on a timescale of 5s or less. GFP gradually leaks out of the cell envelope, evidently impeded by the shrunken peptidoglycan layer. Disruption of the cell envelope by alamethicin occurs in stages, with larger and larger species permeating the envelope as time evolves over tens of minutes. Some of the observed symptoms are consistent with the formation of barrel-stave pores, but the data do not rule out "chaotic pore" or "carpet" mechanisms. We contrast the effects of alamethicin and the human cathelicidin LL-37 on B. subtilis.

Access to α,α-Disubstituted Disilylated Amino Acids and Their Use in Solid-Phase Peptide Synthesis.

A concise synthetic pathway yielding to hydrophobic α,α-disubstituted disilylated amino acids based on a hydrosilylation reaction is described. As a first example of utilization in solid-phase peptide synthesis, TESDpg was introduced in replacement of Aib in an alamethicin sequence, leading to analogues with modified physicochemical properties and conserved helical structures. This study highlights the potential of these new amino acids as tools for peptide modulation.

Structure and orientation of antibiotic peptide alamethicin in phospholipid bilayers as revealed by chemical shift oscillation analysis of solid state nuclear magnetic resonance and molecular dynamics simulation.

The structure, topology and orientation of membrane-bound antibiotic alamethicin were studied using solid state nuclear magnetic resonance (NMR) spectroscopy. (13)C chemical shift interaction was observed in [1-(13)C]-labeled alamethicin. The isotropic chemical shift values indicated that alamethicin forms a helical structure in the entire region. The chemical shift anisotropy of the carbonyl carbon of isotopically labeled alamethicin was also analyzed with the assumption that alamethicin molecules rotate rapidly about the bilayer normal of the phospholipid bilayers. It is considered that the adjacent peptide planes form an angle of 100° or 120° when it forms α-helix or 310-helix, respectively. These properties lead to an oscillation of the chemical shift anisotropy with respect to the phase angle of the peptide plane. Anisotropic data were acquired for the 4 and 7 sites of the N- and C-termini, respectively. The results indicated that the helical axes for the N- and C-termini were tilted 17° and 32° to the bilayer normal, respectively. The chemical shift oscillation curves indicate that the N- and C-termini form the α-helix and 310-helix, respectively. The C-terminal 310-helix of alamethicin in the bilayer was experimentally observed and the unique bending structure of alamethicin was further confirmed by measuring the internuclear distances of [1-(13)C] and [(15)N] doubly-labeled alamethicin. Molecular dynamics simulation of alamethicin embedded into dimyristoyl phophatidylcholine (DMPC) bilayers indicates that the helical axes for α-helical N- and 310-helical C-termini are tilted 12° and 32° to the bilayer normal, respectively, which is in good agreement with the solid state NMR results.

Synthesis of poly(sulfobetaine methacrylate)-grafted chitosan under γ-ray irradiation for alamethicin assembly.

Interaction between peptide and lipid membrane plays a major role in biological activity of membrane-active peptide. We describe here a new biocompatible polymeric assembly to support membrane peptide. Specifically, chitosan-graft-poly(sulfobetaine methacrylate) (CS-g-PSBMA) was synthesized for alamethicin assembly by controlled polymerization under γ-ray irradiation. The graft copolymer could self-assemble into micelles in distilled water for supporting alamethicin. The assembly of alamethicin with CS-g-PSBMA micelles in aqueous solutions was related with the ratio of alamethicin/CS-g-PSBMA: the more alamethicin, the smaller sizes of the hybrid complex. Moreover, alamethicin penetrated into the hydrophobic cores of CS-g-PSBMA micelles while displayed secondary helical conformation in the complex. The results indicate that CS-g-PSBMA assemblies can be used to support membrane peptide.

The fluorescence and infrared absorption probe para-cyanophenylalanine: Effect of labeling on the behavior of different membrane-interacting peptides.

Total syntheses and complete characterizations of singly substituted PheCN -based analogs of alamethicin AlaP, which is active on model and natural membranes, and the TM peptide, which inserts in a transmembrane orientation in lipid bilayers, are reported. The syntheses of the AlaP analogs were performed in solution, while those of TM and its analogs were carried out by solid phase. Using the cyanophenyl fluorescence and infrared (IR) absorption probe, an in-depth investigation of the self-association, membrane-interacting, permeabilizing, and orientation properties of these peptides were conducted. The aromatic residue incorporated induces only a negligible modification to the properties of the parent peptides. The PheCN IR absorption band was located between 2228 and 2230 cm(-1) for all peptides, irrespective of the position of labeling. By contrast, as the width of this band varied significantly with the depth of probe insertion in the bilayer, it could represent a good marker of the PheCN position in phospholipid membranes.