Influence of Acrylamide on Energy Status and Survival of Bacteria of Different Systematic Groups.

We studied the effect of acrylamide on the content of intracellular ATP in the cells of bacteria of the genera Rhodococcus and Alcaligenes, the luminescence of the genetically engineered strain Escherichia coli K12 TG1 (pXen7), and the survival of bacteria of various systematic groups. According to the level of decrease in the concentration of intracellular ATP, it was found that the strain with lower amidase activity (R. erythropolis 6-21) and Gram-negative proteobacteria A. faecalis 2 were the most sensitive to acrylamide after a 20-min exposure, while the strain R. ruber gt 1 was stable, having a high nitrile hydratase activity in combination with a low amidase activity. EC50 of acrylamide for 2 h was 7.1 g/L for E. coli K12 TG1 (pXen7). Acrylamide at a concentration of 10-20 mM added to the culture medium led to a slight decrease in the number of CFUs of Rhodococcus, A. faecalis 2, and E. coli compared to the control. At an acrylamide concentration of 250 mM, from 0.016 to 0.116% of viable bacterial cells remained, and a solution of 500 mM and higher inhibited the growth of the majority of the studied strains. The results confirm that acrylamide is much less toxic to prokaryotes than to eukaryotes.

Role of electron donor in CO2 fixation of chemoautotrophic bacteria and its preconditions: Verification in Alcaligenes hydrogenophilus.

Alcaligenes hydrogenophilus was used to verify the role of the electron donor and acceptor in apparent CO2 fixation of chemoautotrophic bacteria. The response mechanisms underlying the apparent CO2 fixation characteristics with different concentrations of electron donor and acceptor were elucidated by analyzing the transcription characteristics of the cbbL gene, cytoskeleton synthesis efficiency and extracellular free organic carbon concentration. The results showed that the apparent CO2 fixation efficiency of A. hydrogenophilus was significantly influenced by the electron donor (H2), and the degree of electron donor oxidization was responsible for the variation in apparent CO2 fixation efficiency. Furthermore, transcription efficiency of the cbbL gene at low electron donor concentration was lower than that at high electron donor concentration, but excessive electron donor concentrations did not further increase cbbL gene transcription efficiency significantly. High oxygen concentration was not advantageous to cbbL gene transcription efficiency in A. hydrogenophilus, but could improve cell growth rate (protein synthesis rate) and apparent CO2 fixation efficiency, implying that cytoskeleton synthesis efficiency is another important factor determining apparent CO2 fixation efficiency and its contribution maybe greater than that of cbbL transcription. The results also indicated that high apparent CO2 fixation efficiency required the matching of electron donor and acceptor.

Improvement of sulfamethoxazole (SMX) elimination and inhibition of formations of hydroxylamine-SMX and N4-acetyl-SMX by membrane bioreactor systems.

Sulfamethoxazole (SMX) has frequently been detected in aquatic environments. In natural environment, not only individual microorganism but also microbial consortia are involved in some biotransformation of pollutants. The competition for space under consortia causing cell-cell contact inhibition changes the cellular behaviors. Herein, the membrane bioreactor system (MBRS) was applied to improve SMX elimination thorough exchanging the cell-free broths (CFB). The removal efficiency of SMX was increased by more than 24% whether under the pure culture of A. faecalis or under the co-culture of A. faecalis and P. denitrificans with MBRS. Meanwhile, MBRS significantly inhibited the formation of HA-SMX, and Ac-SMX from parent compound. Additionally, the cellular growth under MBRS was obviously enhanced, indicating that the increases in the cellular growth under MBRS are possibly related to the decreases in the levels of HA-SMX and Ac-SMX compared to that without MBRS. The intracellular NADH/NAD+ ratios of A. faecalis under MBRS were increased whether thorough itself-recycle of CFB or exchanging CFB between the pure cultures of A. faecalis and P. denitrificans, suggesting that the enhancement in the bioremoval efficiencies of SMX under MBRS by A. faecalis is likely related to the increases in the NADH/NAD+ ratio. Taken together, the regulation of cell-to-cell communication is preferable strategy to improve the bioremoval efficiency of SMX.

Model-Based Nutrient Feeding Strategies for the Increased Production of Polyhydroxybutyrate (PHB) by Alcaligenes latus.

Polyhydroxyalkanoates (PHAs) are biodegradable polymers which are considered as an effective alternative for conventional plastics due to their mechanical properties similar to the latter. However, the widespread use of these polymers is still hampered due to their higher cost of production as compared to plastics. The production cost could be overcome by obtaining high yields and productivity. The goal of the present research was to enhance the yield of polyhydroxybutyrate (PHB) with the help of two simple fed-batch cultivation strategies. In the present study, average batch kinetic and substrate limitation/inhibition study data of Alcaligenes latus was used for the development of PHB model which was then adopted for designing various off-line nutrient feeding strategies to enhance PHB accumulation. The predictive ability of the model was validated by experimental implementation of two fed-batch strategies. One such dynamic strategy of fed-batch cultivation under pseudo-steady state with respect to nitrogen and simultaneous carbon feeding strategy resulted in significantly high biomass and PHB concentration of 39.17 g/L and 29.64 g/L, respectively. This feeding strategy demonstrated a high PHB productivity and PHB content of 0.6 g/L h and 75%, respectively, which were remarkably high in comparison to batch cultivation. The mathematical model can also be employed for designing various other nutrient feeding strategies.

Chemically modified surface functional groups of Alcaligenes sp. S-XJ-1 to enhance its demulsifying capability.

Cell-surface functional groups (amino, carboxyl, hydroxyl, as well as phosphate) were chemically modified in various ways to enhance the demulsification capability of the demulsifying bacteria Alcaligenes sp. S-XJ-1. Results demonstrated that the demulsifying activity was significantly inhibited by amino enrichment with cetyl trimethyl ammonium bromide, amino methylation, hydroxyl acetylation, and phosphate esterification, but was gradually promoted by carboxyl blocking with increasing the extents of esterification. Compared with the raw biomass, an optimal esterification of carboxyl moieties enhanced the demulsification ratio by 26.5% and shortened the emulsion half-life from 24 to 8.8 h. The demulsification boost was found to be dominated by strengthened hydrophobicity (from 53° to 74°) and weakened electronegativity (from -34.6 to -4.3 mV at pH 7.0) of the cell surface, allowing the rapid dispersion and adsorption of cells onto the oil-water interface. The chemical modification of the functional groups on the biomass surface is a promising tool for the creation of a high-performance bacterial demulsifier.

Improved production of carotenoid-free welan gum in a genetic-engineered Alcaligenes sp. ATCC31555.

OBJECTIVE: To improve the production of welan gum and obtain a carotenoid-free strain while reducing the fermentation and post-treatment costs. RESULTS: The vitreoscilla globin (vgb) gene combined with the ß-galactosidase (lacZ) promoter was inserted into the phytoene synthase (crtB) gene region of the chromosome in Alcaligenes sp. ATCC31555. When the recombinant strain was grown in a 5 l fermentor, welan gum was produced at 24 ± 0.4 g l(-1) compared to 21 g ± 0.4 g l(-1) in the wild type. Furthermore, the carotenoid-free welan gum produced using Alcaligenes sp. ATCC31555 VHb strain was less expensive with improved properties. CONCLUSIONS: Alcaligenes sp. ATCC31555 VHb strain was a better neutral welan-producing strain with a higher production than the wild-type strain.

Novel approach for the ammonium removal by simultaneous heterotrophic nitrification and denitrification using a novel bacterial species co-culture.

Agricultural activities lead excessive emission of ammonia nitrogen in the environment and can profoundly interfere the equilibrium of the natural ecosystems leading to their contamination. Actually, the biological purification of wastewaters is the most adopted technique thanks to its several advantages such as high performance and low energy consumption. For this reason, two novel strains of Alcaligenes sp. S84S3 and Proteus sp. S19 genus were isolated from an activated sludge and applied in the treatment of ammonium and nitrite in aqueous solution. Under the optimum operating conditions of temperature (30 °C), pH (7), carbon substrate (2 g/L of glucose) and duration of incubation time (69 h), the strain Alcaligenes sp. S84S3 could oxidize 65% of the ammonium as high as 272.72 mg-NH4(+)/L. Moreover, during 48 h, the nitrate reduction rate performed by the strain Proteus S19 was about 99 % without production of nitrite intermediate (negligible concentration). Moreover, the coculture of the strains Alcaligenes sp. S84S3 and Proteus sp. S19 could eliminate 65.83% of the ammonium ions without production of toxic forms of nitrogen oxides during a short time of incubation (118 h) at the same operational conditions with providing the aeration in the first treatment phase. The coculture of our isolated strains is assumed to have a good potential for nitrification and denitrification reactions applied in the treatment of wastewater containing ammonium, nitrite and nitrate. As a result, we can consider that the mixed culture is a practical method in the treatment of high-strength ammonium wastewater with reducing of sludge production.

Characterization of the novel dimethyl sulfide-degrading bacterium Alcaligenes sp. SY1 and its biochemical degradation pathway.

Recently, the biodegradation of volatile organic sulfur compounds (VOSCs) has become a burgeoning field, with a growing focus on the reduction of VOSCs. The reduction of VOSCs encompasses both organic emission control and odor control. Herein, Alcaligenes sp. SY1 was isolated from active sludge and found to utilize dimethyl sulfide (DMS) as a growth substrate in a mineral salt medium. Response surface methodology (RSM) analysis was applied to optimize the incubation conditions. The following conditions for optimal degradation were identified: temperature 27.03°C; pH 7.80; inoculum salinity 0.84%; and initial DMS concentration 1585.39 µM. Under these conditions, approximately 99% of the DMS was degraded within 30 h of incubation. Two metabolic compounds were detected and identified by gas chromatography-mass spectrometry (GC-MS): dimethyl disulfide (DMDS) and dimethyl trisulfide (DMTS). The DMS degradation kinetics for different concentrations were evaluated using the Haldane-Andrews model and the pseudo first-order model. The maximum specific growth rate and degradation rate of Alcaligenes sp. SY1 were 0.17 h(-1) and 0.63 gs gx(-1)h(-1). A possible degradation pathway is proposed, and the results suggest that Alcaligenes sp. SY1 has the potential to control odor emissions under aerobic conditions.

[Biooxidation of gold-bearing sulfide ore and subsequent biological treatment of cyanidation residues].

The percolation biooxidation parameters of ore from the Bakyrchik deposit were studied. An investigation of the technological parameters (such as the concentration of leaching agents, irrigation intensity, and pauses at various stages of the leaching) revealed the optimal mode for precious metal extraction. The stages of the ore processing were biooxidation, gold extraction by cyanidation or thiosulfate leaching, and biological destruction of cyanide. The gold and silver recovery rates by cyanidation were 64.0 and 57.3%, respectively. The gold and silver recovery rates by thiosulfate leaching were 64.0 and 57.3%, respectively. Gold and silver recovery rates from unoxidized ore (control experiment) by cyanidation were 20.9 and 26.8%, respectively. Thiosulfate leaching of unoxidized ore allowed the extraction of 38.8 and 24.2% of the gold and silver, respectively. Cyanidation residues were treated with bacteria of the genus Alcaligenes in order to destruct cyanide.

Simultaneous nitrification and denitrification by novel heterotrophs in remediation of fish processing effluent.

Three isolates viz. Lysinibacillus sp. HT13, Alcaligenes sp. HT15 and Proteus sp. HT37 isolated from fish processing effluent and having a C/N ratio of 2, removed 218, 169, and 400 µg cell(-1) day(-1) NH4(+)-N, respectively without subsequent build up of nitrite or nitrate. Ability of the selected isolates in removing NH4(+)-N, NO2(-)-N, and NO3(-)-N was checked in the presence of four commonly reported and tested effluent carbon sources viz. pyruvate, glycerol, methanol, and acetate. Further, when supplemented to fish processing wastewater containing 234 ppm total Kjeldahl's nitrogen, Lysinibacillus sp. HT13, Alcaligenes sp. HT15, and Proteus sp. HT37 could remediate 95.74, 86.17, and 76.6% nitrogen, respectively in 48 h. This is the first report of a Lysinibacillus sp. carrying out aerobically the process of simultaneous nitrification and denitrification. The results demonstrate the potential of the isolates for use in treatment of fish processing effluents and demonstrating the efficient removal of ammonia.

Development of a PCR-based method for monitoring the status of Alcaligenes species in the agricultural environment.

To analyze the status of the genus Alcaligenes in the agricultural environment, we developed a PCR method for detection of these species from vegetables and farming soil. The selected PCR primers amplified a 107-bp fragment of the 16S rRNA gene in a specific PCR assay with a detection limit of 1.06 pg of pure culture DNA, corresponding to DNA extracted from approximately 23 cells of Alcaligenes faecalis. Meanwhile, PCR primers generated a detectable amount of the amplicon from 2.2×10(2) CFU/ml cell suspensions from the soil. Analysis of vegetable phylloepiphytic and farming soil microbes showed that bacterial species belonging to the genus Alcaligenes were present in the range from 0.9×10(0) CFU per gram (or cm(2)) (Japanese radish: Raphanus sativus var. longipinnatus) to more than 1.1×10(4) CFU/g (broccoli flowers: Brassica oleracea var. italic), while 2.4×10(2) to 4.4×10(3) CFU/g were detected from all soil samples. These results indicated that Alcaligenes species are present in the phytosphere at levels 10-1000 times lower than those in soil. Our approach may be useful for tracking or quantifying species of the genus Alcaligenes in the agricultural environment.

[Influence of yeast extract on the fermentation of glucose by the demulsifying strain Alcaligenes sp. S-XJ-1].

The demulsifying strain Alcaligenes sp. S-XJ-1, isolated from oil contaminated soil, was cultivated with glucose as the carbon source. The influences of yeast extract on the growth, demulsifying ability and the element composition of the strain were investigated. The results showed that the yeast extract could increase the biomass and enhance the glucose utilization of Alcaligenes sp. S-XJ-1. When the concentration of the yeast extract was 5 g x L(-1), the biomass was increased up to 3.0 g x L(-1), and the glucose utilization achieved 58%. The demulsifying ability of the strain was improved with increasing yeast extract concentration. When the concentration of the yeast extract was 10 g x L(-1), the demulsification ratio of the obtained cell was 76%. While the C/N ratio of the cells decreased with the increasing concentration of yeast extract. The proteins of cells were extracted and measured. The results showed that the proteins of the obtained cell increased with the increasing concentration of yeast extract, in accordance with the increased concentrations of proteins on the surface of the cells as measured by FTIR. It is estimated that the increase of the proteins leads to the improvement of the demulsifying ability of the demulsifying strain and theses proteins play essential roles in the demulsifying process.

Separation and characterization of effective demulsifying substances from surface of Alcaligenes sp. S-XJ-1 and its application in water-in-kerosene emulsion.

The main goal of this work was to analyze the effect of surface substances on demulsifying capability of the demulsifying strain Alcaligenes sp. S-XJ-1. The demulsifying substances were successfully separated from the cell surface with dichloromethane-alkali treatment, and exhibited 67.5% of the demulsification ratio for water-in-kerosene emulsions at a dosage of 356mg/L. FT-IR, TLC and ESI-MS analysis confirmed the presence of a carbohydrate-protein-lipid complex in the demulsifying substances with the major molecular ions from mass-to-charge ratio (m/z) 165 to 814. After the substances separated, the cell morphology changed from aggregated to dispersed, and the concentration of cell surface functional groups decreased. Cell surface hydrophobicity and the ability of cell adhesion to hydrophobic surface of the treated cells was also reduced compared with original cell. It was proved that the demulsifying substances had a significant effect on cell surface properties and accordingly with demulsifying capability of Alcaligenes sp. S-XJ-1.

Rhizosphere colonization and arsenic translocation in sunflower (Helianthus annuus L.) by arsenate reducing Alcaligenes sp. strain Dhal-L.

In the present study, six arsenic-resistant strains previously isolated were tested for their plant growth promoting characteristics and heavy metal resistance, in order to choose one model strain as an inoculum for sunflower plants in pot experiments. The aim was to investigate the effect of arsenic-resistant strain on sunflower growth and on arsenic uptake from arsenic contaminated soil. Based on plant growth promoting characteristics and heavy metal resistance, Alcaligenes sp. strain Dhal-L was chosen as an inoculum. Beside the ability to reduce arsenate to arsenite via an Ars operon, the strain exhibited 1-amino-cyclopropane-1-carboxylic acid deaminase activity and it was also able to produce siderophore and indole acetic acid. Pot experiments were conducted with an agricultural soil contaminated with arsenic (214 mg kg⁻¹). A real time PCR method was set up based on the quantification of ACR3(2) type of arsenite efflux pump carried by Alcaligenes sp. strain Dhal-L, in order to monitor presence and colonisation of the strain in the bulk and rhizospheric soil. As a result of strain inoculation, arsenic uptake by plants was increased by 53 %, whereas ACR3(2) gene copy number in rhizospheric soil was 100 times higher in inoculated than in control pots, indicating the colonisation of strain. The results indicated that the presence of arsenate reducing strains in the rhizosphere of sunflower influences arsenic mobilization and promotes arsenic uptake by plant.

An isobutyronitrile-induced bienzymatic system of Alcaligenes sp. MTCC 10674 and its application in the synthesis of α-hydroxyisobutyric acid.

Alcaligenes sp. MTCC 10674 was isolated as acetone cyanohydrin hydrolyzing bacterium from soil of orchid gardens of Himachal Pradesh. Acetone cyanohydrin hydrolyzing activity of this organism comprised nitrile hydratase and amidase activities. It exhibited higher substrate specificity towards aliphatic hydroxynitrile (acetone cyanohydrin) in comparison to arylaliphatic hydroxynitrile. Isobutyronitrile (40 mM) acted as a carbon source as well as inducer for growth of Alcaligenes sp. MTCC 10674 and expression of acetone cyanohydrin hydrolyzing activity. Optimization of culture condition using response surface methodology increased acetone cyanohydrin hydrolyzing activity by 1.3-fold, while inducer mediation approach increased the activity by 1.2-fold. The half life of this enzyme was 25 h at 15 °C. V max and K m value for acetone cyanohydrin hydrolyzing enzyme was 0.71 µmol mg(-1) min(-1) and 14.3 mM, when acetone cyanohydrin was used as substrate. Acetone cyanohydrin hydrolyzing enzyme encountered product inhibition and IC50 and K i value were calculated to be 28 and 10.2 mM, respectively, when product α-hydroxyisobutyric acid was added in the reaction. Under optimized reaction conditions at 40 ml fed batch scale, 3 mg dcw ml (-) resting cells of Alcaligenes sp. MTCC 10674 fully converted 0.33 M acetone cyanohydrin into α-hydroxyisobutyric acid (1.02 g) in 6 h 40 min. The characterization of acetone cyanohydrins hydrolyzing activity revealed that it comprises bienzymatic nitrile hydrolyzing system, i.e. nitrile hydratase and amidase for the production of α-hydroxyisobutyric acid from acetone cyanohydrin and maximum 70 % yield is being reported for the first time.

Upstream process optimization of polyhydroxybutyrate (PHB) by Alcaligenes latus using two-stage batch and fed-batch fermentation strategies.

This research focused on optimizing the upstream process time for production of polyhydroxybutyrate (PHB) from sucrose by two-stage batch and fed-batch fermentation with Alcaligenes latus ATCC 29714. The study included selection of strain, two-stage batch fermentations with different time points for switching to nitrogen limited media (14, 16 or 18 h) and fed-batch fermentations with varied time points (similar to two stage) for introducing nitrogen limited media. The optimal strain to produce PHB using sucrose as carbon source was A. latus ATCC 29714 with maximum-specific growth rate of 0.38 ± 0.01 h(-1) and doubling time of 1.80 ± 0.05 h. Inducing nitrogen limitation at 16 h and ending second stage at 26 h gave optimal performance for PHB production, resulting in a PHB content of 46.7 ± 12.2 % (g PHB per g dry cell weight) at the end of fermentation. This was significantly higher (P ≤ 0.05) (approximately 7 %) than the corresponding fed batch run in which nitrogen limitation was initiated at 16 h.

Screening and characterization of potential cadmium biosorbent Alcaligenes strain from industrial effluent.

Cadmium (Cd) is a heavy metal that is easily accumulated in the living organisms in connection with anthropogenic activities which may result in serious health problems. In the present study, five potential cadmium tolerant bacterial strains were isolated from industrial effluent with heavy metal contamination and were screened for biosorption potential with their active growth in different media. After growth in shake flasks containing mineral salt media and tryptone soya broth, cell pellet of AS-5 removed by centrifugation sequestered almost 98% and 69% of cadmium (a.i. 25 mg/l Cd) respectively. Other strains accumulated variable amounts of Cd. 16S rRNA gene sequence of AS-5 and its homology analysis using BLAST reveals its phylogenetic relationship with family ß-proteobacteriaceae and 98% homology with Alcaligenes sp., a facultative anaerobe.

Enrichment of CO2-fixing bacteria in cylinder-type electrochemical bioreactor with built-in anode compartment.

Bacterial assimilation of CO2 into stable biomolecules using electrochemical reducing power may be an effective method to reduce atmospheric CO2 without fossil fuel combustion. For the enrichment of the CO2-fixing bacteria using electrochemical reducing power as an energy source, a cylinder-type electrochemical bioreactor with a built-in anode compartment was developed. A graphite felt cathode modified with neutral red (NR-graphite cathode) was used as a solid electron mediator to induce bacterial cells to fix CO2 using electrochemical reducing power. Bacterial CO2 consumption was calculated based on the variation in the ratio of CO2 to N2 in the gas reservoir. CO2 consumed by the bacteria grown in the electrochemical bioreactor (2,000 ml) reached a maximum of approximately 1,500 ml per week. Time-coursed variations in the bacterial community grown with the electrochemical reducing power and CO2 in the mineral-based medium were analyzed via temperature gradient gel electrophoresis (TGGE) of the 16S rDNA variable region. Some of the bacterial community constituents noted at the initial time disappeared completely, but some of them observed as DNA signs at the initial time were clearly enriched in the electrochemical bioreactor during 24 weeks of incubation. Finally, Alcaligenes sp. and Achromobacter sp., which are capable of autotrophically fixing CO2, were enriched to major constituents of the bacterial community in the electrochemical bioreactor.

Enhanced welan gum production using a two-stage agitation speed control strategy in Alcaligenes sp. CGMCC2428.

Batch fermentative production of welan gum by Alcaligenes sp. CGMCC2428 was investigated under various oxygen supply conditions using regulating agitation speed. Based on a three kinetic parameters analysis that includes specific cell growth rate (µ), specific glucose consumption rate (q (s)), and specific welan formation rate (q (p)), a two-stage agitation speed control strategy was proposed to achieve high concentration, high yield, and high viscosity of welan. During the first 22 h, the agitation speed in 7.5 L fermenter was controlled at 800 rpm to maintain high µ for cell growth. The agitation was then reduced step-wise to 600 rpm to maintain a changing profile with stable dissolved oxygen levels and obtain high qp for high welan accumulation. Finally, the maximum concentration of welan was reached at 26.3 ± 0.89 g L(-1) with a yield of 0.53 ± 0.003 g g(-1) and the welan gum viscosity of 3.05 ± 0.10 Pa s, which increased by an average of 15.4, 15.2, and 20.1% over the best results controlled by constant agitation speeds.

Optimization of biodemulsifier production from Alcaligenes sp. S-XJ-1 and its application in breaking crude oil emulsion.

A biodemulsifier-producing strain of Alcaligenes sp. S-XJ-1, isolated from petroleum-contaminated soil of the Karamay Oilfield, exhibited excellent demulsifying ability. The application of this biodemulsifier significantly improved the quality of separated water compared with the chemical demulsifier, polyether, which clearly indicates that it has potential applications in the crude oil extraction industry. To optimize its biosynthesis, the impacts of carbon sources, nitrogen sources and pH were studied in detail. Paraffin, a hydrophobic carbon source, favored the synthesis of this cell wall associated biodemulsifier. The nitrogen source ammonium citrate stimulated the production and demulsifying performance of the biodemulsifier. An alkaline environment (pH 9.5) of the initial culture medium favored the strain's growth and improved its demulsifying ability. The results showed paraffin, ammonium citrate and pH had significant effects on the production of the biodemulsifier. These three variables were further investigated using a response surface methodology based on a central composite design to optimize the biodemulsifier yield. The optimal yield conditions were found at a paraffin concentration of 4.01%, an ammonium citrate concentration of 8.08 g/L and a pH of 9.35. Under optimal conditions, the biodemulsifier yield from Alcaligenes sp. S-XJ-1 was increased to 3.42 g/L.