The effect of intense pulsed light on the sensory properties of nonfat dry milk.

Our objectives were to examine (1) how intense pulsed light (IPL) processing parameters (exposure time and initial temperature) affected aroma, flavor, and mouthfeel of nonfat dry milk, (2) which levels of each parameter produced aroma, flavor, and mouthfeel changes from an untreated control sample, and (3) whether minimal or intense processing conditions produced a noticeable appearance change from the control. Four exposure times (1, 2, 3, and 4 passes through the IPL chamber) and three initial temperatures (25, 30, and 35℃) were studied with untreated milk powder as the control. The samples were prepared as both milk powder and reconstituted milk for sensory evaluation. Using standard evaluating protocols, trained descriptive analysis panelists rated the aroma, flavor, and mouthfeel of these samples. Panelists compared the appearance of the IPL-treated samples that underwent a minimal or intense processing condition to the control by using a two-out-of-five difference test. Increasing the exposure time led to increased intensities of overall flavor, burnt flavor, and umami taste in both milk powder and reconstituted milk, while increasing temperature increased animal and sulfur aromas in reconstituted milk only. Compared to the control, all levels of exposure time at any initial temperature resulted in increased aroma and flavor including cardboard aroma, sulfur aroma, and brothy flavor in both milk powder and reconstituted milk. Only the 4-pass exposure at the initial temperature of 25℃ changed the appearance of milk powder. However, the appearance change was not noticeable in reconstituted milk. PRACTICAL APPLICATION: The standard evaluation protocols and lexicons provide useful tools for research on milk powder. Additionally, the understanding of critical factors impacting sensory properties will contribute to a better implementation of this decontamination technology.

Consumption of vitamin D2 enhanced mushrooms is associated with improved bone health.

Mushrooms are the best nonanimal food source of vitamin D2. Pulsed irradiation can enhance vitamin D2 in mushrooms quickly. We investigated the effect of supplementing high vitamin D2Pleurotus ferulae mushrooms in a mouse model of osteoporosis. Thirty-two female C57BL/6JNarl mice were divided into four groups including sham, ovariectomized (OVX), OVX+nonpulsed mushroom (NPM) and OVX+pulsed mushroom (PM). After 23 weeks of treatment, serum samples were analyzed for osteoblast and osteoclast indicators, as well as metabolites using NMR spectroscopy. To examine bone density, femurs were analyzed using micro-computed tomography. The NPM and PM treatment mice showed increased bone density in comparison with OVX mice. In addition, the PM mice showed higher osteoblast and lower osteoclast indicators in comparison with OVX mice. Serum metabolomics analysis indicated several metabolites that were different in PM mice, some of which could be correlated with bone health. Taken together, these results suggest that pulsed irradiated mushrooms are able to increase bone density in osteoporotic mice possibly through enhanced bone metabolism. Further studies in humans are needed to show their efficacy in preventing osteoporosis.

Effect of different drying methods on chlorophyll, ascorbic acid and antioxidant compounds retention of leaves of Hibiscus sabdariffa L.

BACKGROUND: Use of the indigenous, easily accessible leafy vegetable roselle (Hibiscus sabdariffa L.) for value addition is gaining impetus as its nutritive and nutraceutical compounds are exposed by investigations. Being a perishable, storage is challenging, hence different methods of drying have been an attractive alternative for its postharvest usage in foods without much compromising its quality and antioxidant potential. RESULTS: Room- and freeze-dried samples were found to have best quality in terms of colour, total flavonoid content (18.53 ± 2.39 and 18.66 ± 1.06 g kg(-1) respectively), total phenolic content (17.76 ± 1.93 and 18.91 ± 0.48 g kg(-1)), chlorophyll content (1.59 ± 0.001 and 1.55 ± 0.001 g kg(-1)) and ascorbic acid content (11.11 ± 1.04 and 8.92 ± 0.94 g kg(-1)) compared with those subjected to infrared, crossflow, microwave, oven or sun drying. Samples treated by room and freeze drying retained maximum antioxidant potential as shown by the phosphomolybdate method and the 2,2-diphenyl-1-picrylhydrazyl free radical-scavenging activity and ferric-reducing antioxidant power assays. Cold water and hot water extracts showed significantly higher total phenolic content and total antioxidant activity owing to the greater solubility of phenolics and destruction of cellular components in polar solvents than in organic solvents. CONCLUSION: The data obtained show the potential for retaining quality parameters of roselle leaf under suitable drying methods.

Electrochemical impedance spectroscopy as an alternative to determine dielectric constant of potatoes at various moisture contents.

The dielectric (DE) properties, specifically the DE constant (ε') and loss factor (ε''), were measured for vacuum-dried and freeze-dried potato samples at a microwave frequency of 2.45 GHz over a range of different moisture contents (MCs) using a DE probe and also a 2-probe electrochemical impedance spectroscopy (EIS). Third-order polynomial models (ε' = f1(MC); and ε'' = f2(MC)) at room temperature were developed for regression analysis. Additionally, at various temperatures (T), biphasic 3rd-order polynomial models (ε' = f1(MC, T); and ε'' = f2(MC, T)) were obtained to determine ε' and ε'' as a function of MC and T using measured data. The vacuum-dried potato sample showed a good fitness of ε' and ε'' (R² = 0.95 and 0.96, respectively) to the regression model with the range of MCs from 18% to 80% (w/w), while the freeze-dried potato sample showed a good fitness of ε' and ε'' to the 1st-phase regression model with MC < 50% w/w (R² = 0.95 and 0.96, respectively) and the 2nd-phase regression model with MC > 50% w/w (R² = 0.94 to 0.96). EIS measurements were also used to obtain correlation impedances for ε' and ε'' determined by the DE probe method. The resulted regression analysis meets the demands for simple, rapid, and accurate assessment for transient values of ε' and ε'' of food products during dehydration/drying processes. The EIS method was verified to be a successful alternative to direct measurements of ε' and ε''.

Microwave and micronization treatments affect dehulling characteristics and bioactive contents of dry beans (Phaseolus vulgaris L.).

BACKGROUND: Heat pretreatment is considered the first step in grain milling. This study therefore evaluated microwave and micronization heat treatments in improving the dehulling characteristics, phenolic composition and antioxidant and α-amylase activities of bean cultivars from three market classes. RESULTS: Heat treatments improved dehulling characteristics (hull yield, rate coefficient and reduced abrasive hardness index) depending on bean cultivar, whereas treatment effects increased with dehulling time. Micronization increased minor phenolic components (tartaric esters, flavonols and anthocyanins) of all beans but had variable effects on total phenolic content depending on market class. Microwave treatment increased α-amylase inhibitor concentration, activity and potency, which were strongly correlated (r² = 0.71, P < 0.0001) with the flavonol content of beans. Heat treatment had variable effects on the phenolic composition of bean hulls obtained by abrasive dehulling without significantly altering the antioxidant activity of black and pinto bean hulls. Principal component analysis on 22 constituents analyzed in this study demonstrated the differences in dehulling characteristics and phenolic components of beans and hulls as major factors in segregating the beneficial heat treatment effects. CONCLUSION: Heat treatment may be useful in developing novel dietary fibers from beans with variable composition and bioactivity with a considerable range of applications as functional food ingredients.

Liquid chromatography-electrospray ionization tandem mass spectrometric analysis of 2-alkylcyclobutanones in irradiated chicken by precolumn derivatization with hydroxylamine.

Food irradiation is a common preservation method that is used in many countries. The ability to identify irradiated food is important for assuring compliance with regulatory policies, such as food labeling requirements, and for informed consumer choice. There is thus a significant demand for analytical methods of high sensitivity and selectivity to identify irradiated food, especially for foods subjected to low-dose irradiation and for processed or composite foods that contain small quantities of irradiated ingredients. 2-Alkylcyclobutanones (2-ACBs) are uniquely formed during food irradiation and have been adopted by the European Committee for Standardization as signature biomarkers for the identification of irradiated foods. We now report the development of a novel assay for quantification of 2-ACBs in γ-irradiated food by liquid extraction of fat content followed by precolumn derivatization and liquid chromatography-tandem mass spectrometric (LC-MS/MS) detection. Precolumn derivatization with hydroxylamine introduced a polar functional group into the otherwise nonpolar 2-ACBs, which greatly enhanced ESI-MS response. The method was validated for extraction efficiency, precision, accuracy, and detection limit. In comparison with the current GC-MS based European official method (EN1785:2003) for 2-ACBs determination, our new LC-MS/MS method offers a more efficient sample processing protocol with reduced solvent consumption. More importantly, the combination of chemical derivatization and LC-MS/MS detection significantly enhanced the analytical sensitivity of the method, which allows confident identification of food irradiated with as little as 10 Gy. To the best of our knowledge, this is the first report of 2-ACB determination by LC-MS/MS and the first analytical method allowing confident identification of irradiated food at dosage of down to 10 Gy.

Identification and characterization of gamma-irradiated dried Lentinus edodes using ESR, SEM, and FTIR analyses.

UNLABELLED: A detailed electron spin resonance (ESR) analysis for different parts of gamma-irradiated (0 to 50 kGy) dried mushroom (Lentinus edodes) was conducted to identify radiation-induced signals. All studied mushroom parts except gills produced strong dose-dependent radiation-induced ESR signals particularly at about g = 2.0076, 20005, and 1.9911 demonstrating the generation of crystalline sugar radicals following irradiation. The intensity of these signals was highest in cap skin samples, followed by the cap core, stem skin, whole mushroom powder, and stem core samples, respectively. ESR-based identification was easily possible at 2 kGy or more using mushroom cap skin or cap core as samples. The radiation-induced ESR signals were found sensitive to thermal treatment showing the limitation of ESR-based detection in case of heat-processed samples. Scanning electron microscopy (SEM) showed micro-structural damage upon irradiation resulting decreased percentage of rehydration; however, no major alteration was observed through the Fourier transform infrared (FTIR) spectra. Irradiation changed the structural morphology; however, the main functional groups were stable against radiation treatment. PRACTICAL APPLICATION: Food irradiation can confirm hygienic quality and prolong the product shelf life. However, due to lack of international consensus, effective identification methods and detailed quality characterization are required for the general use of this technology.